testsuite/expect/test7.13

#!/usr/bin/env expect
############################################################################
# Purpose: Verify the correct setting of a job's ExitCode.
############################################################################
# Copyright (C) 2010 Lawrence Livermore National Security.
# Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
# Written by Don Lipari <lipari1@llnl.gov>
# CODE-OCEC-09-009. All rights reserved.
#
# This file is part of Slurm, a resource management program.
# For details, see <https://slurm.schedmd.com/>.
# Please also read the included file: DISCLAIMER.
#
# Slurm is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 2 of the License, or (at your option)
# any later version.
#
# Slurm is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
# details.
#
# You should have received a copy of the GNU General Public License along
# with Slurm; if not, write to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
############################################################################
source ./globals

set file_in          "$test_dir/input"
set file_prog1       "$test_name.prog1"
set file_prog2       "$test_name.prog2"

set accounting_storage_enforce [get_config_param "AccountingStorageEnforce"]
if {[param_contains $accounting_storage_enforce "nosteps"] || [param_contains $accounting_storage_enforce "nojobs"]} {
	skip "This test can not be run with nosteps or nojobs (AccountingStorageEnforce)"
}

proc cleanup {} {
	global file_prog1 file_prog2

	file delete $file_prog1 $file_prog2
}

#
# Rebuild programs
#
exec $bin_cc -O -o $file_prog1 ${file_prog1}.c
exec $bin_cc -O -o $file_prog2 ${file_prog2}.c

#
# Submit a script that returns a successful exit code and confirm that
# the job record's ExitCode reflects this value.  $file_prog1 returns a
# successful error code (0) and $file_prog2 returns an unsuccessful
# error code (123).
#
# The failed job step should have no influence on the job's ExitCode
# value.  However the DerivedExitCode value should be set to the
# highest value of all the job steps, in this case, 123.
#

make_bash_script $file_in "
  $bin_echo 'testing successful job return code'
  $srun ./$file_prog1
  $srun ./$file_prog2
  exit 0
"

set job_id [submit_job -fail "--output=/dev/null -t1 $file_in"]

#
# Wait for job to complete
#
wait_for_job -fail $job_id "DONE"

#
# Confirm correct ExitCode setting in job record
#
set job_exit_code [get_job_param $job_id "ExitCode"]
subtest {$job_exit_code eq "0:0"} "Verify ExitCode in job record" "$job_exit_code != 0:0"
if {[param_contains [get_config_param "SlurmctldParameters"] "enable_stepmgr"]} {
	subskip "stepmgr jobs don't track DerivedExitCode on the controller."
} else {
	set derived_exit_code [get_job_param $job_id "DerivedExitCode"]
	subtest {$derived_exit_code eq "123:0"} "Verify DerivedExitCode in job record" "$derived_exit_code != 123:0"
}

#
# Confirm the job record in the db has the same exit codes
#
if {[get_config_param "AccountingStorageType"] eq "accounting_storage/slurmdbd"} {
	# Wait for the end time to be recorded in the accounting database
	wait_for_job_acct -fail $job_id end

	set output [run_command_output -fail "$sacct -n -P -j $job_id -o JobID,ExitCode,DerivedExitCode"]
	subtest [regexp -line "^$job_id\\|0:0\\|123:0\$" $output] "Verify job record in the accounting database has the right exit codes"
	subtest [regexp -line "^$job_id\\.batch\\|0:0\\|\$" $output] "Verify batch step record in the accounting database has the right exit codes"
	subtest [regexp -line "^$job_id\\.($number)\\|0:0\\|\$" $output] "Verify step 0 record in the accounting database has the right exit codes"
	subtest [regexp -line "^$job_id\\.($number)\\|123:0\\|\$" $output] "Verify step 1 record in the accounting database has the right exit codes"
}

#
# Now submit a script that returns a non-zero exit code and confirm
# that the job record's ExitCode reflects this value.  The two
# successful job steps ($file_prog1 from above) should have no
# influence on the job's, unsuccessful ExitCode.
#
# Here, the DerivedExitCode value should be set to the highest value
# of the two successful job steps (i.e., 0).
#
make_bash_script $file_in "
  $bin_echo 'testing unsuccessful job return code'
  $srun ./$file_prog1
  $srun ./$file_prog1
  exit 33
"

set job_id [submit_job -fail "--output=/dev/null -t1 $file_in"]

#
# Wait for job to complete
#
wait_for_job -fail $job_id "DONE"

#
# Confirm correct ExitCode setting in job record
#
set exit_code [get_job_param $job_id "ExitCode"]
subtest {$exit_code eq "33:0"} "Verify ExitCode in job record" "$exit_code != 33:0"
set derived_exit_code [get_job_param $job_id "DerivedExitCode"]
subtest {$derived_exit_code eq "0:0"} "Verify DerivedExitCode in job record" "$derived_exit_code != 0:0"

#
# Confirm the job record in the db has the same exit codes
#
if {[get_config_param "AccountingStorageType"] eq "accounting_storage/slurmdbd"} {
	# Wait for the end time to be recorded in the accounting database
	wait_for_job_acct -fail $job_id end

	set output [run_command_output -fail "$sacct -n -P -j $job_id -o JobID,ExitCode,DerivedExitCode"]
	subtest [regexp -line "^$job_id\\|33:0\\|0:0\$" $output] "Verify job record in the accounting database has the right exit codes"
	subtest [regexp -line "^$job_id\\.batch\\|33:0\\|\$" $output] "Verify batch step record in the accounting database has the right exit codes"
	subtest [regexp -line "^$job_id\\.($number)\\|0:0\\|\$" $output] "Verify step 0 record in the accounting database has the right exit codes"
	subtest [regexp -line "^$job_id\\.($number)\\|0:0\\|\$" $output] "Verify step 1 record in the accounting database has the right exit codes"
}