| # generated automatically by aclocal 1.17 -*- Autoconf -*- |
| |
| # Copyright (C) 1996-2024 Free Software Foundation, Inc. |
| |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) |
| m4_ifndef([AC_AUTOCONF_VERSION], |
| [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl |
| m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.72],, |
| [m4_warning([this file was generated for autoconf 2.72. |
| You have another version of autoconf. It may work, but is not guaranteed to. |
| If you have problems, you may need to regenerate the build system entirely. |
| To do so, use the procedure documented by the package, typically 'autoreconf'.])]) |
| |
| # Configure paths for GLIB |
| # Owen Taylor 1997-2001 |
| |
| # Increment this whenever this file is changed. |
| #serial 4 |
| |
| dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) |
| dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject, |
| dnl gthread, or gio is specified in MODULES, pass to pkg-config |
| dnl |
| AC_DEFUN([AM_PATH_GLIB_2_0], |
| [dnl |
| dnl Get the cflags and libraries from pkg-config |
| dnl |
| |
| dnl We can't use PKG_PREREQ because that needs 0.29. |
| m4_ifndef([PKG_PROG_PKG_CONFIG], |
| [pkg.m4 version 0.28 or later is required]) |
| |
| AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program], |
| , enable_glibtest=yes) |
| |
| min_glib_version=ifelse([$1], [], [2.0.0], [$1]) |
| pkg_config_args="glib-2.0 >= $min_glib_version" |
| for module in . $4 |
| do |
| case "$module" in |
| gmodule) |
| pkg_config_args="$pkg_config_args gmodule-2.0" |
| ;; |
| gmodule-no-export) |
| pkg_config_args="$pkg_config_args gmodule-no-export-2.0" |
| ;; |
| gobject) |
| pkg_config_args="$pkg_config_args gobject-2.0" |
| ;; |
| gthread) |
| pkg_config_args="$pkg_config_args gthread-2.0" |
| ;; |
| gio*) |
| pkg_config_args="$pkg_config_args $module-2.0" |
| ;; |
| esac |
| done |
| |
| PKG_PROG_PKG_CONFIG([0.16]) |
| |
| no_glib="" |
| |
| if test "x$PKG_CONFIG" = x ; then |
| no_glib=yes |
| PKG_CONFIG=no |
| fi |
| |
| dnl For GLIB_CFLAGS and GLIB_LIBS |
| PKG_CHECK_MODULES([GLIB], [$pkg_config_args], [:], [:]) |
| |
| dnl For the tools |
| PKG_CHECK_VAR([GLIB_GENMARSHAL], [glib-2.0], [glib_genmarshal]) |
| PKG_CHECK_VAR([GOBJECT_QUERY], [glib-2.0], [gobject_query]) |
| PKG_CHECK_VAR([GLIB_MKENUMS], [glib-2.0], [glib_mkenums]) |
| PKG_CHECK_VAR([GLIB_COMPILE_RESOURCES], [gio-2.0], [glib_compile_resources]) |
| |
| AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) |
| |
| if test x$PKG_CONFIG != xno ; then |
| ## don't try to run the test against uninstalled libtool libs |
| if $PKG_CONFIG --uninstalled $pkg_config_args; then |
| echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH" |
| enable_glibtest=no |
| fi |
| |
| if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then |
| : |
| else |
| no_glib=yes |
| fi |
| fi |
| |
| if test x"$no_glib" = x ; then |
| glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` |
| glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` |
| glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` |
| if test "x$enable_glibtest" = "xyes" ; then |
| ac_save_CFLAGS="$CFLAGS" |
| ac_save_LIBS="$LIBS" |
| CFLAGS="$CFLAGS $GLIB_CFLAGS" |
| LIBS="$GLIB_LIBS $LIBS" |
| dnl |
| dnl Now check if the installed GLib is sufficiently new. (Also sanity |
| dnl checks the results of pkg-config to some extent) |
| dnl |
| rm -f conf.glibtest |
| AC_RUN_IFELSE([AC_LANG_SOURCE([[ |
| #include <glib.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| |
| int |
| main (void) |
| { |
| unsigned int major, minor, micro; |
| |
| fclose (fopen ("conf.glibtest", "w")); |
| |
| if (sscanf("$min_glib_version", "%u.%u.%u", &major, &minor, µ) != 3) { |
| printf("%s, bad version string\n", "$min_glib_version"); |
| exit(1); |
| } |
| |
| if ((glib_major_version != $glib_config_major_version) || |
| (glib_minor_version != $glib_config_minor_version) || |
| (glib_micro_version != $glib_config_micro_version)) |
| { |
| printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", |
| $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, |
| glib_major_version, glib_minor_version, glib_micro_version); |
| printf ("*** was found! If pkg-config was correct, then it is best\n"); |
| printf ("*** to remove the old version of GLib. You may also be able to fix the error\n"); |
| printf("*** by modifying your LD_LIBRARY_PATH environment variable, or by editing\n"); |
| printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); |
| printf("*** required on your system.\n"); |
| printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); |
| printf("*** to point to the correct configuration files\n"); |
| } |
| else if ((glib_major_version != GLIB_MAJOR_VERSION) || |
| (glib_minor_version != GLIB_MINOR_VERSION) || |
| (glib_micro_version != GLIB_MICRO_VERSION)) |
| { |
| printf("*** GLib header files (version %d.%d.%d) do not match\n", |
| GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); |
| printf("*** library (version %d.%d.%d)\n", |
| glib_major_version, glib_minor_version, glib_micro_version); |
| } |
| else |
| { |
| if ((glib_major_version > major) || |
| ((glib_major_version == major) && (glib_minor_version > minor)) || |
| ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) |
| { |
| return 0; |
| } |
| else |
| { |
| printf("\n*** An old version of GLib (%u.%u.%u) was found.\n", |
| glib_major_version, glib_minor_version, glib_micro_version); |
| printf("*** You need a version of GLib newer than %u.%u.%u. The latest version of\n", |
| major, minor, micro); |
| printf("*** GLib is always available from ftp://ftp.gtk.org.\n"); |
| printf("***\n"); |
| printf("*** If you have already installed a sufficiently new version, this error\n"); |
| printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); |
| printf("*** being found. The easiest way to fix this is to remove the old version\n"); |
| printf("*** of GLib, but you can also set the PKG_CONFIG environment to point to the\n"); |
| printf("*** correct copy of pkg-config. (In this case, you will have to\n"); |
| printf("*** modify your LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf\n"); |
| printf("*** so that the correct libraries are found at run-time))\n"); |
| } |
| } |
| return 1; |
| } |
| ]])],[],[no_glib=yes],[echo $ac_n "cross compiling; assumed OK... $ac_c"]) |
| CFLAGS="$ac_save_CFLAGS" |
| LIBS="$ac_save_LIBS" |
| fi |
| fi |
| if test "x$no_glib" = x ; then |
| AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)) |
| ifelse([$2], , :, [$2]) |
| else |
| AC_MSG_RESULT(no) |
| if test "$PKG_CONFIG" = "no" ; then |
| echo "*** A new enough version of pkg-config was not found." |
| echo "*** See http://www.freedesktop.org/software/pkgconfig/" |
| else |
| if test -f conf.glibtest ; then |
| : |
| else |
| echo "*** Could not run GLib test program, checking why..." |
| ac_save_CFLAGS="$CFLAGS" |
| ac_save_LIBS="$LIBS" |
| CFLAGS="$CFLAGS $GLIB_CFLAGS" |
| LIBS="$LIBS $GLIB_LIBS" |
| AC_LINK_IFELSE([AC_LANG_PROGRAM([[ |
| #include <glib.h> |
| #include <stdio.h> |
| ]], [[ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ]])], |
| [ echo "*** The test program compiled, but did not run. This usually means" |
| echo "*** that the run-time linker is not finding GLib or finding the wrong" |
| echo "*** version of GLib. If it is not finding GLib, you'll need to set your" |
| echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" |
| echo "*** to the installed location Also, make sure you have run ldconfig if that" |
| echo "*** is required on your system" |
| echo "***" |
| echo "*** If you have an old version installed, it is best to remove it, although" |
| echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], |
| [ echo "*** The test program failed to compile or link. See the file config.log for the" |
| echo "*** exact error that occurred. This usually means GLib is incorrectly installed."]) |
| CFLAGS="$ac_save_CFLAGS" |
| LIBS="$ac_save_LIBS" |
| fi |
| fi |
| GLIB_CFLAGS="" |
| GLIB_LIBS="" |
| GLIB_GENMARSHAL="" |
| GOBJECT_QUERY="" |
| GLIB_MKENUMS="" |
| GLIB_COMPILE_RESOURCES="" |
| ifelse([$3], , :, [$3]) |
| fi |
| rm -f conf.glibtest |
| ]) |
| |
| # pkg.m4 - Macros to locate and use pkg-config. -*- Autoconf -*- |
| # serial 12 (pkg-config-0.29.2) |
| |
| dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>. |
| dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com> |
| dnl |
| dnl This program is free software; you can redistribute it and/or modify |
| dnl it under the terms of the GNU General Public License as published by |
| dnl the Free Software Foundation; either version 2 of the License, or |
| dnl (at your option) any later version. |
| dnl |
| dnl This program is distributed in the hope that it will be useful, but |
| dnl WITHOUT ANY WARRANTY; without even the implied warranty of |
| dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| dnl General Public License for more details. |
| dnl |
| dnl You should have received a copy of the GNU General Public License |
| dnl along with this program; if not, write to the Free Software |
| dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| dnl 02111-1307, USA. |
| dnl |
| dnl As a special exception to the GNU General Public License, if you |
| dnl distribute this file as part of a program that contains a |
| dnl configuration script generated by Autoconf, you may include it under |
| dnl the same distribution terms that you use for the rest of that |
| dnl program. |
| |
| dnl PKG_PREREQ(MIN-VERSION) |
| dnl ----------------------- |
| dnl Since: 0.29 |
| dnl |
| dnl Verify that the version of the pkg-config macros are at least |
| dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's |
| dnl installed version of pkg-config, this checks the developer's version |
| dnl of pkg.m4 when generating configure. |
| dnl |
| dnl To ensure that this macro is defined, also add: |
| dnl m4_ifndef([PKG_PREREQ], |
| dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) |
| dnl |
| dnl See the "Since" comment for each macro you use to see what version |
| dnl of the macros you require. |
| m4_defun([PKG_PREREQ], |
| [m4_define([PKG_MACROS_VERSION], [0.29.2]) |
| m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, |
| [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) |
| ])dnl PKG_PREREQ |
| |
| dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) |
| dnl ---------------------------------- |
| dnl Since: 0.16 |
| dnl |
| dnl Search for the pkg-config tool and set the PKG_CONFIG variable to |
| dnl first found in the path. Checks that the version of pkg-config found |
| dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is |
| dnl used since that's the first version where most current features of |
| dnl pkg-config existed. |
| AC_DEFUN([PKG_PROG_PKG_CONFIG], |
| [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) |
| m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) |
| m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) |
| AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) |
| AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) |
| AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) |
| |
| if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then |
| AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) |
| fi |
| if test -n "$PKG_CONFIG"; then |
| _pkg_min_version=m4_default([$1], [0.9.0]) |
| AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) |
| if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no]) |
| PKG_CONFIG="" |
| fi |
| fi[]dnl |
| ])dnl PKG_PROG_PKG_CONFIG |
| |
| dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) |
| dnl ------------------------------------------------------------------- |
| dnl Since: 0.18 |
| dnl |
| dnl Check to see whether a particular set of modules exists. Similar to |
| dnl PKG_CHECK_MODULES(), but does not set variables or print errors. |
| dnl |
| dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) |
| dnl only at the first occurrence in configure.ac, so if the first place |
| dnl it's called might be skipped (such as if it is within an "if", you |
| dnl have to call PKG_CHECK_EXISTS manually |
| AC_DEFUN([PKG_CHECK_EXISTS], |
| [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl |
| if test -n "$PKG_CONFIG" && \ |
| AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then |
| m4_default([$2], [:]) |
| m4_ifvaln([$3], [else |
| $3])dnl |
| fi]) |
| |
| dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) |
| dnl --------------------------------------------- |
| dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting |
| dnl pkg_failed based on the result. |
| m4_define([_PKG_CONFIG], |
| [if test -n "$$1"; then |
| pkg_cv_[]$1="$$1" |
| elif test -n "$PKG_CONFIG"; then |
| PKG_CHECK_EXISTS([$3], |
| [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` |
| test "x$?" != "x0" && pkg_failed=yes ], |
| [pkg_failed=yes]) |
| else |
| pkg_failed=untried |
| fi[]dnl |
| ])dnl _PKG_CONFIG |
| |
| dnl _PKG_SHORT_ERRORS_SUPPORTED |
| dnl --------------------------- |
| dnl Internal check to see if pkg-config supports short errors. |
| AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], |
| [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) |
| if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then |
| _pkg_short_errors_supported=yes |
| else |
| _pkg_short_errors_supported=no |
| fi[]dnl |
| ])dnl _PKG_SHORT_ERRORS_SUPPORTED |
| |
| |
| dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], |
| dnl [ACTION-IF-NOT-FOUND]) |
| dnl -------------------------------------------------------------- |
| dnl Since: 0.4.0 |
| dnl |
| dnl Note that if there is a possibility the first call to |
| dnl PKG_CHECK_MODULES might not happen, you should be sure to include an |
| dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac |
| AC_DEFUN([PKG_CHECK_MODULES], |
| [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl |
| AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl |
| AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl |
| |
| pkg_failed=no |
| AC_MSG_CHECKING([for $2]) |
| |
| _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) |
| _PKG_CONFIG([$1][_LIBS], [libs], [$2]) |
| |
| m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS |
| and $1[]_LIBS to avoid the need to call pkg-config. |
| See the pkg-config man page for more details.]) |
| |
| if test $pkg_failed = yes; then |
| AC_MSG_RESULT([no]) |
| _PKG_SHORT_ERRORS_SUPPORTED |
| if test $_pkg_short_errors_supported = yes; then |
| $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` |
| else |
| $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` |
| fi |
| # Put the nasty error message in config.log where it belongs |
| echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD |
| |
| m4_default([$4], [AC_MSG_ERROR( |
| [Package requirements ($2) were not met: |
| |
| $$1_PKG_ERRORS |
| |
| Consider adjusting the PKG_CONFIG_PATH environment variable if you |
| installed software in a non-standard prefix. |
| |
| _PKG_TEXT])[]dnl |
| ]) |
| elif test $pkg_failed = untried; then |
| AC_MSG_RESULT([no]) |
| m4_default([$4], [AC_MSG_FAILURE( |
| [The pkg-config script could not be found or is too old. Make sure it |
| is in your PATH or set the PKG_CONFIG environment variable to the full |
| path to pkg-config. |
| |
| _PKG_TEXT |
| |
| To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl |
| ]) |
| else |
| $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS |
| $1[]_LIBS=$pkg_cv_[]$1[]_LIBS |
| AC_MSG_RESULT([yes]) |
| $3 |
| fi[]dnl |
| ])dnl PKG_CHECK_MODULES |
| |
| |
| dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], |
| dnl [ACTION-IF-NOT-FOUND]) |
| dnl --------------------------------------------------------------------- |
| dnl Since: 0.29 |
| dnl |
| dnl Checks for existence of MODULES and gathers its build flags with |
| dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags |
| dnl and VARIABLE-PREFIX_LIBS from --libs. |
| dnl |
| dnl Note that if there is a possibility the first call to |
| dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to |
| dnl include an explicit call to PKG_PROG_PKG_CONFIG in your |
| dnl configure.ac. |
| AC_DEFUN([PKG_CHECK_MODULES_STATIC], |
| [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl |
| _save_PKG_CONFIG=$PKG_CONFIG |
| PKG_CONFIG="$PKG_CONFIG --static" |
| PKG_CHECK_MODULES($@) |
| PKG_CONFIG=$_save_PKG_CONFIG[]dnl |
| ])dnl PKG_CHECK_MODULES_STATIC |
| |
| |
| dnl PKG_INSTALLDIR([DIRECTORY]) |
| dnl ------------------------- |
| dnl Since: 0.27 |
| dnl |
| dnl Substitutes the variable pkgconfigdir as the location where a module |
| dnl should install pkg-config .pc files. By default the directory is |
| dnl $libdir/pkgconfig, but the default can be changed by passing |
| dnl DIRECTORY. The user can override through the --with-pkgconfigdir |
| dnl parameter. |
| AC_DEFUN([PKG_INSTALLDIR], |
| [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) |
| m4_pushdef([pkg_description], |
| [pkg-config installation directory @<:@]pkg_default[@:>@]) |
| AC_ARG_WITH([pkgconfigdir], |
| [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],, |
| [with_pkgconfigdir=]pkg_default) |
| AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) |
| m4_popdef([pkg_default]) |
| m4_popdef([pkg_description]) |
| ])dnl PKG_INSTALLDIR |
| |
| |
| dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) |
| dnl -------------------------------- |
| dnl Since: 0.27 |
| dnl |
| dnl Substitutes the variable noarch_pkgconfigdir as the location where a |
| dnl module should install arch-independent pkg-config .pc files. By |
| dnl default the directory is $datadir/pkgconfig, but the default can be |
| dnl changed by passing DIRECTORY. The user can override through the |
| dnl --with-noarch-pkgconfigdir parameter. |
| AC_DEFUN([PKG_NOARCH_INSTALLDIR], |
| [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) |
| m4_pushdef([pkg_description], |
| [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@]) |
| AC_ARG_WITH([noarch-pkgconfigdir], |
| [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],, |
| [with_noarch_pkgconfigdir=]pkg_default) |
| AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) |
| m4_popdef([pkg_default]) |
| m4_popdef([pkg_description]) |
| ])dnl PKG_NOARCH_INSTALLDIR |
| |
| |
| dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, |
| dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) |
| dnl ------------------------------------------- |
| dnl Since: 0.28 |
| dnl |
| dnl Retrieves the value of the pkg-config variable for the given module. |
| AC_DEFUN([PKG_CHECK_VAR], |
| [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl |
| AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl |
| |
| _PKG_CONFIG([$1], [variable="][$3]["], [$2]) |
| AS_VAR_COPY([$1], [pkg_cv_][$1]) |
| |
| AS_VAR_IF([$1], [""], [$5], [$4])dnl |
| ])dnl PKG_CHECK_VAR |
| |
| dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES, |
| dnl [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND], |
| dnl [DESCRIPTION], [DEFAULT]) |
| dnl ------------------------------------------ |
| dnl |
| dnl Prepare a "--with-" configure option using the lowercase |
| dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and |
| dnl PKG_CHECK_MODULES in a single macro. |
| AC_DEFUN([PKG_WITH_MODULES], |
| [ |
| m4_pushdef([with_arg], m4_tolower([$1])) |
| |
| m4_pushdef([description], |
| [m4_default([$5], [build with ]with_arg[ support])]) |
| |
| m4_pushdef([def_arg], [m4_default([$6], [auto])]) |
| m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes]) |
| m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no]) |
| |
| m4_case(def_arg, |
| [yes],[m4_pushdef([with_without], [--without-]with_arg)], |
| [m4_pushdef([with_without],[--with-]with_arg)]) |
| |
| AC_ARG_WITH(with_arg, |
| AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),, |
| [AS_TR_SH([with_]with_arg)=def_arg]) |
| |
| AS_CASE([$AS_TR_SH([with_]with_arg)], |
| [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)], |
| [auto],[PKG_CHECK_MODULES([$1],[$2], |
| [m4_n([def_action_if_found]) $3], |
| [m4_n([def_action_if_not_found]) $4])]) |
| |
| m4_popdef([with_arg]) |
| m4_popdef([description]) |
| m4_popdef([def_arg]) |
| |
| ])dnl PKG_WITH_MODULES |
| |
| dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES, |
| dnl [DESCRIPTION], [DEFAULT]) |
| dnl ----------------------------------------------- |
| dnl |
| dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES |
| dnl check._[VARIABLE-PREFIX] is exported as make variable. |
| AC_DEFUN([PKG_HAVE_WITH_MODULES], |
| [ |
| PKG_WITH_MODULES([$1],[$2],,,[$3],[$4]) |
| |
| AM_CONDITIONAL([HAVE_][$1], |
| [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"]) |
| ])dnl PKG_HAVE_WITH_MODULES |
| |
| dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES, |
| dnl [DESCRIPTION], [DEFAULT]) |
| dnl ------------------------------------------------------ |
| dnl |
| dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after |
| dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make |
| dnl and preprocessor variable. |
| AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES], |
| [ |
| PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4]) |
| |
| AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], |
| [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])]) |
| ])dnl PKG_HAVE_DEFINE_WITH_MODULES |
| |
| # Copyright (C) 2002-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_AUTOMAKE_VERSION(VERSION) |
| # ---------------------------- |
| # Automake X.Y traces this macro to ensure aclocal.m4 has been |
| # generated from the m4 files accompanying Automake X.Y. |
| # (This private macro should not be called outside this file.) |
| AC_DEFUN([AM_AUTOMAKE_VERSION], |
| [am__api_version='1.17' |
| dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to |
| dnl require some minimum version. Point them to the right macro. |
| m4_if([$1], [1.17], [], |
| [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl |
| ]) |
| |
| # _AM_AUTOCONF_VERSION(VERSION) |
| # ----------------------------- |
| # aclocal traces this macro to find the Autoconf version. |
| # This is a private macro too. Using m4_define simplifies |
| # the logic in aclocal, which can simply ignore this definition. |
| m4_define([_AM_AUTOCONF_VERSION], []) |
| |
| # AM_SET_CURRENT_AUTOMAKE_VERSION |
| # ------------------------------- |
| # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. |
| # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. |
| AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], |
| [AM_AUTOMAKE_VERSION([1.17])dnl |
| m4_ifndef([AC_AUTOCONF_VERSION], |
| [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl |
| _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) |
| |
| # AM_AUX_DIR_EXPAND -*- Autoconf -*- |
| |
| # Copyright (C) 2001-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets |
| # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to |
| # '$srcdir', '$srcdir/..', or '$srcdir/../..'. |
| # |
| # Of course, Automake must honor this variable whenever it calls a |
| # tool from the auxiliary directory. The problem is that $srcdir (and |
| # therefore $ac_aux_dir as well) can be either absolute or relative, |
| # depending on how configure is run. This is pretty annoying, since |
| # it makes $ac_aux_dir quite unusable in subdirectories: in the top |
| # source directory, any form will work fine, but in subdirectories a |
| # relative path needs to be adjusted first. |
| # |
| # $ac_aux_dir/missing |
| # fails when called from a subdirectory if $ac_aux_dir is relative |
| # $top_srcdir/$ac_aux_dir/missing |
| # fails if $ac_aux_dir is absolute, |
| # fails when called from a subdirectory in a VPATH build with |
| # a relative $ac_aux_dir |
| # |
| # The reason of the latter failure is that $top_srcdir and $ac_aux_dir |
| # are both prefixed by $srcdir. In an in-source build this is usually |
| # harmless because $srcdir is '.', but things will broke when you |
| # start a VPATH build or use an absolute $srcdir. |
| # |
| # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, |
| # iff we strip the leading $srcdir from $ac_aux_dir. That would be: |
| # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` |
| # and then we would define $MISSING as |
| # MISSING="\${SHELL} $am_aux_dir/missing" |
| # This will work as long as MISSING is not called from configure, because |
| # unfortunately $(top_srcdir) has no meaning in configure. |
| # However there are other variables, like CC, which are often used in |
| # configure, and could therefore not use this "fixed" $ac_aux_dir. |
| # |
| # Another solution, used here, is to always expand $ac_aux_dir to an |
| # absolute PATH. The drawback is that using absolute paths prevent a |
| # configured tree to be moved without reconfiguration. |
| |
| AC_DEFUN([AM_AUX_DIR_EXPAND], |
| [AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl |
| # Expand $ac_aux_dir to an absolute path. |
| am_aux_dir=`cd "$ac_aux_dir" && pwd` |
| ]) |
| |
| # AM_CONDITIONAL -*- Autoconf -*- |
| |
| # Copyright (C) 1997-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_CONDITIONAL(NAME, SHELL-CONDITION) |
| # ------------------------------------- |
| # Define a conditional. |
| AC_DEFUN([AM_CONDITIONAL], |
| [AC_PREREQ([2.52])dnl |
| m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], |
| [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl |
| AC_SUBST([$1_TRUE])dnl |
| AC_SUBST([$1_FALSE])dnl |
| _AM_SUBST_NOTMAKE([$1_TRUE])dnl |
| _AM_SUBST_NOTMAKE([$1_FALSE])dnl |
| m4_define([_AM_COND_VALUE_$1], [$2])dnl |
| if $2; then |
| $1_TRUE= |
| $1_FALSE='#' |
| else |
| $1_TRUE='#' |
| $1_FALSE= |
| fi |
| AC_CONFIG_COMMANDS_PRE( |
| [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then |
| AC_MSG_ERROR([[conditional "$1" was never defined. |
| Usually this means the macro was only invoked conditionally.]]) |
| fi])]) |
| |
| # Copyright (C) 1999-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| |
| # There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be |
| # written in clear, in which case automake, when reading aclocal.m4, |
| # will think it sees a *use*, and therefore will trigger all it's |
| # C support machinery. Also note that it means that autoscan, seeing |
| # CC etc. in the Makefile, will ask for an AC_PROG_CC use... |
| |
| |
| # _AM_DEPENDENCIES(NAME) |
| # ---------------------- |
| # See how the compiler implements dependency checking. |
| # NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". |
| # We try a few techniques and use that to set a single cache variable. |
| # |
| # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was |
| # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular |
| # dependency, and given that the user is not expected to run this macro, |
| # just rely on AC_PROG_CC. |
| AC_DEFUN([_AM_DEPENDENCIES], |
| [AC_REQUIRE([AM_SET_DEPDIR])dnl |
| AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl |
| AC_REQUIRE([AM_MAKE_INCLUDE])dnl |
| AC_REQUIRE([AM_DEP_TRACK])dnl |
| |
| m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], |
| [$1], [CXX], [depcc="$CXX" am_compiler_list=], |
| [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], |
| [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], |
| [$1], [UPC], [depcc="$UPC" am_compiler_list=], |
| [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], |
| [depcc="$$1" am_compiler_list=]) |
| |
| AC_CACHE_CHECK([dependency style of $depcc], |
| [am_cv_$1_dependencies_compiler_type], |
| [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then |
| # We make a subdir and do the tests there. Otherwise we can end up |
| # making bogus files that we don't know about and never remove. For |
| # instance it was reported that on HP-UX the gcc test will end up |
| # making a dummy file named 'D' -- because '-MD' means "put the output |
| # in D". |
| rm -rf conftest.dir |
| mkdir conftest.dir |
| # Copy depcomp to subdir because otherwise we won't find it if we're |
| # using a relative directory. |
| cp "$am_depcomp" conftest.dir |
| cd conftest.dir |
| # We will build objects and dependencies in a subdirectory because |
| # it helps to detect inapplicable dependency modes. For instance |
| # both Tru64's cc and ICC support -MD to output dependencies as a |
| # side effect of compilation, but ICC will put the dependencies in |
| # the current directory while Tru64 will put them in the object |
| # directory. |
| mkdir sub |
| |
| am_cv_$1_dependencies_compiler_type=none |
| if test "$am_compiler_list" = ""; then |
| am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` |
| fi |
| am__universal=false |
| m4_case([$1], [CC], |
| [case " $depcc " in #( |
| *\ -arch\ *\ -arch\ *) am__universal=true ;; |
| esac], |
| [CXX], |
| [case " $depcc " in #( |
| *\ -arch\ *\ -arch\ *) am__universal=true ;; |
| esac]) |
| |
| for depmode in $am_compiler_list; do |
| # Setup a source with many dependencies, because some compilers |
| # like to wrap large dependency lists on column 80 (with \), and |
| # we should not choose a depcomp mode which is confused by this. |
| # |
| # We need to recreate these files for each test, as the compiler may |
| # overwrite some of them when testing with obscure command lines. |
| # This happens at least with the AIX C compiler. |
| : > sub/conftest.c |
| for i in 1 2 3 4 5 6; do |
| echo '#include "conftst'$i'.h"' >> sub/conftest.c |
| # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with |
| # Solaris 10 /bin/sh. |
| echo '/* dummy */' > sub/conftst$i.h |
| done |
| echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf |
| |
| # We check with '-c' and '-o' for the sake of the "dashmstdout" |
| # mode. It turns out that the SunPro C++ compiler does not properly |
| # handle '-M -o', and we need to detect this. Also, some Intel |
| # versions had trouble with output in subdirs. |
| am__obj=sub/conftest.${OBJEXT-o} |
| am__minus_obj="-o $am__obj" |
| case $depmode in |
| gcc) |
| # This depmode causes a compiler race in universal mode. |
| test "$am__universal" = false || continue |
| ;; |
| nosideeffect) |
| # After this tag, mechanisms are not by side-effect, so they'll |
| # only be used when explicitly requested. |
| if test "x$enable_dependency_tracking" = xyes; then |
| continue |
| else |
| break |
| fi |
| ;; |
| msvc7 | msvc7msys | msvisualcpp | msvcmsys) |
| # This compiler won't grok '-c -o', but also, the minuso test has |
| # not run yet. These depmodes are late enough in the game, and |
| # so weak that their functioning should not be impacted. |
| am__obj=conftest.${OBJEXT-o} |
| am__minus_obj= |
| ;; |
| none) break ;; |
| esac |
| if depmode=$depmode \ |
| source=sub/conftest.c object=$am__obj \ |
| depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ |
| $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ |
| >/dev/null 2>conftest.err && |
| grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && |
| grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && |
| grep $am__obj sub/conftest.Po > /dev/null 2>&1 && |
| ${MAKE-make} -s -f confmf > /dev/null 2>&1; then |
| # icc doesn't choke on unknown options, it will just issue warnings |
| # or remarks (even with -Werror). So we grep stderr for any message |
| # that says an option was ignored or not supported. |
| # When given -MP, icc 7.0 and 7.1 complain thus: |
| # icc: Command line warning: ignoring option '-M'; no argument required |
| # The diagnosis changed in icc 8.0: |
| # icc: Command line remark: option '-MP' not supported |
| if (grep 'ignoring option' conftest.err || |
| grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else |
| am_cv_$1_dependencies_compiler_type=$depmode |
| break |
| fi |
| fi |
| done |
| |
| cd .. |
| rm -rf conftest.dir |
| else |
| am_cv_$1_dependencies_compiler_type=none |
| fi |
| ]) |
| AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) |
| AM_CONDITIONAL([am__fastdep$1], [ |
| test "x$enable_dependency_tracking" != xno \ |
| && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) |
| ]) |
| |
| |
| # AM_SET_DEPDIR |
| # ------------- |
| # Choose a directory name for dependency files. |
| # This macro is AC_REQUIREd in _AM_DEPENDENCIES. |
| AC_DEFUN([AM_SET_DEPDIR], |
| [AC_REQUIRE([AM_SET_LEADING_DOT])dnl |
| AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl |
| ]) |
| |
| |
| # AM_DEP_TRACK |
| # ------------ |
| AC_DEFUN([AM_DEP_TRACK], |
| [AC_ARG_ENABLE([dependency-tracking], [dnl |
| AS_HELP_STRING( |
| [--enable-dependency-tracking], |
| [do not reject slow dependency extractors]) |
| AS_HELP_STRING( |
| [--disable-dependency-tracking], |
| [speeds up one-time build])]) |
| if test "x$enable_dependency_tracking" != xno; then |
| am_depcomp="$ac_aux_dir/depcomp" |
| AMDEPBACKSLASH='\' |
| am__nodep='_no' |
| fi |
| AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) |
| AC_SUBST([AMDEPBACKSLASH])dnl |
| _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl |
| AC_SUBST([am__nodep])dnl |
| _AM_SUBST_NOTMAKE([am__nodep])dnl |
| ]) |
| |
| # Generate code to set up dependency tracking. -*- Autoconf -*- |
| |
| # Copyright (C) 1999-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_OUTPUT_DEPENDENCY_COMMANDS |
| # ------------------------------ |
| AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], |
| [{ |
| # Older Autoconf quotes --file arguments for eval, but not when files |
| # are listed without --file. Let's play safe and only enable the eval |
| # if we detect the quoting. |
| # TODO: see whether this extra hack can be removed once we start |
| # requiring Autoconf 2.70 or later. |
| AS_CASE([$CONFIG_FILES], |
| [*\'*], [eval set x "$CONFIG_FILES"], |
| [*], [set x $CONFIG_FILES]) |
| shift |
| # Used to flag and report bootstrapping failures. |
| am_rc=0 |
| for am_mf |
| do |
| # Strip MF so we end up with the name of the file. |
| am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` |
| # Check whether this is an Automake generated Makefile which includes |
| # dependency-tracking related rules and includes. |
| # Grep'ing the whole file directly is not great: AIX grep has a line |
| # limit of 2048, but all sed's we know have understand at least 4000. |
| sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ |
| || continue |
| am_dirpart=`AS_DIRNAME(["$am_mf"])` |
| am_filepart=`AS_BASENAME(["$am_mf"])` |
| AM_RUN_LOG([cd "$am_dirpart" \ |
| && sed -e '/# am--include-marker/d' "$am_filepart" \ |
| | $MAKE -f - am--depfiles]) || am_rc=$? |
| done |
| if test $am_rc -ne 0; then |
| AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments |
| for automatic dependency tracking. If GNU make was not used, consider |
| re-running the configure script with MAKE="gmake" (or whatever is |
| necessary). You can also try re-running configure with the |
| '--disable-dependency-tracking' option to at least be able to build |
| the package (albeit without support for automatic dependency tracking).]) |
| fi |
| AS_UNSET([am_dirpart]) |
| AS_UNSET([am_filepart]) |
| AS_UNSET([am_mf]) |
| AS_UNSET([am_rc]) |
| rm -f conftest-deps.mk |
| } |
| ])# _AM_OUTPUT_DEPENDENCY_COMMANDS |
| |
| |
| # AM_OUTPUT_DEPENDENCY_COMMANDS |
| # ----------------------------- |
| # This macro should only be invoked once -- use via AC_REQUIRE. |
| # |
| # This code is only required when automatic dependency tracking is enabled. |
| # This creates each '.Po' and '.Plo' makefile fragment that we'll need in |
| # order to bootstrap the dependency handling code. |
| AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], |
| [AC_CONFIG_COMMANDS([depfiles], |
| [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], |
| [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) |
| |
| # Do all the work for Automake. -*- Autoconf -*- |
| |
| # Copyright (C) 1996-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This macro actually does too much. Some checks are only needed if |
| # your package does certain things. But this isn't really a big deal. |
| |
| dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. |
| m4_define([AC_PROG_CC], |
| m4_defn([AC_PROG_CC]) |
| [_AM_PROG_CC_C_O |
| ]) |
| |
| # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) |
| # AM_INIT_AUTOMAKE([OPTIONS]) |
| # ----------------------------------------------- |
| # The call with PACKAGE and VERSION arguments is the old style |
| # call (pre autoconf-2.50), which is being phased out. PACKAGE |
| # and VERSION should now be passed to AC_INIT and removed from |
| # the call to AM_INIT_AUTOMAKE. |
| # We support both call styles for the transition. After |
| # the next Automake release, Autoconf can make the AC_INIT |
| # arguments mandatory, and then we can depend on a new Autoconf |
| # release and drop the old call support. |
| AC_DEFUN([AM_INIT_AUTOMAKE], |
| [AC_PREREQ([2.65])dnl |
| m4_ifdef([_$0_ALREADY_INIT], |
| [m4_fatal([$0 expanded multiple times |
| ]m4_defn([_$0_ALREADY_INIT]))], |
| [m4_define([_$0_ALREADY_INIT], m4_expansion_stack)])dnl |
| dnl Autoconf wants to disallow AM_ names. We explicitly allow |
| dnl the ones we care about. |
| m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl |
| AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl |
| AC_REQUIRE([AC_PROG_INSTALL])dnl |
| if test "`cd $srcdir && pwd`" != "`pwd`"; then |
| # Use -I$(srcdir) only when $(srcdir) != ., so that make's output |
| # is not polluted with repeated "-I." |
| AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl |
| # test to see if srcdir already configured |
| if test -f $srcdir/config.status; then |
| AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) |
| fi |
| fi |
| |
| # test whether we have cygpath |
| if test -z "$CYGPATH_W"; then |
| if (cygpath --version) >/dev/null 2>/dev/null; then |
| CYGPATH_W='cygpath -w' |
| else |
| CYGPATH_W=echo |
| fi |
| fi |
| AC_SUBST([CYGPATH_W]) |
| |
| # Define the identity of the package. |
| dnl Distinguish between old-style and new-style calls. |
| m4_ifval([$2], |
| [AC_DIAGNOSE([obsolete], |
| [$0: two- and three-arguments forms are deprecated.]) |
| m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl |
| AC_SUBST([PACKAGE], [$1])dnl |
| AC_SUBST([VERSION], [$2])], |
| [_AM_SET_OPTIONS([$1])dnl |
| dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. |
| m4_if( |
| m4_ifset([AC_PACKAGE_NAME], [ok]):m4_ifset([AC_PACKAGE_VERSION], [ok]), |
| [ok:ok],, |
| [m4_fatal([AC_INIT should be called with package and version arguments])])dnl |
| AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl |
| AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl |
| |
| _AM_IF_OPTION([no-define],, |
| [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) |
| AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl |
| |
| # Some tools Automake needs. |
| AC_REQUIRE([AM_SANITY_CHECK])dnl |
| AC_REQUIRE([AC_ARG_PROGRAM])dnl |
| AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) |
| AM_MISSING_PROG([AUTOCONF], [autoconf]) |
| AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) |
| AM_MISSING_PROG([AUTOHEADER], [autoheader]) |
| AM_MISSING_PROG([MAKEINFO], [makeinfo]) |
| AC_REQUIRE([AM_PROG_INSTALL_SH])dnl |
| AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl |
| AC_REQUIRE([AC_PROG_MKDIR_P])dnl |
| # For better backward compatibility. To be removed once Automake 1.9.x |
| # dies out for good. For more background, see: |
| # <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> |
| # <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> |
| AC_SUBST([mkdir_p], ['$(MKDIR_P)']) |
| # We need awk for the "check" target (and possibly the TAP driver). The |
| # system "awk" is bad on some platforms. |
| AC_REQUIRE([AC_PROG_AWK])dnl |
| AC_REQUIRE([AC_PROG_MAKE_SET])dnl |
| AC_REQUIRE([AM_SET_LEADING_DOT])dnl |
| _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], |
| [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], |
| [_AM_PROG_TAR([v7])])]) |
| _AM_IF_OPTION([no-dependencies],, |
| [AC_PROVIDE_IFELSE([AC_PROG_CC], |
| [_AM_DEPENDENCIES([CC])], |
| [m4_define([AC_PROG_CC], |
| m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl |
| AC_PROVIDE_IFELSE([AC_PROG_CXX], |
| [_AM_DEPENDENCIES([CXX])], |
| [m4_define([AC_PROG_CXX], |
| m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl |
| AC_PROVIDE_IFELSE([AC_PROG_OBJC], |
| [_AM_DEPENDENCIES([OBJC])], |
| [m4_define([AC_PROG_OBJC], |
| m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl |
| AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], |
| [_AM_DEPENDENCIES([OBJCXX])], |
| [m4_define([AC_PROG_OBJCXX], |
| m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl |
| ]) |
| # Variables for tags utilities; see am/tags.am |
| if test -z "$CTAGS"; then |
| CTAGS=ctags |
| fi |
| AC_SUBST([CTAGS]) |
| if test -z "$ETAGS"; then |
| ETAGS=etags |
| fi |
| AC_SUBST([ETAGS]) |
| if test -z "$CSCOPE"; then |
| CSCOPE=cscope |
| fi |
| AC_SUBST([CSCOPE]) |
| |
| AC_REQUIRE([_AM_SILENT_RULES])dnl |
| dnl The testsuite driver may need to know about EXEEXT, so add the |
| dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This |
| dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. |
| AC_CONFIG_COMMANDS_PRE(dnl |
| [m4_provide_if([_AM_COMPILER_EXEEXT], |
| [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl |
| |
| AC_REQUIRE([_AM_PROG_RM_F]) |
| AC_REQUIRE([_AM_PROG_XARGS_N]) |
| |
| dnl The trailing newline in this macro's definition is deliberate, for |
| dnl backward compatibility and to allow trailing 'dnl'-style comments |
| dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. |
| ]) |
| |
| dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not |
| dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further |
| dnl mangled by Autoconf and run in a shell conditional statement. |
| m4_define([_AC_COMPILER_EXEEXT], |
| m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) |
| |
| # When config.status generates a header, we must update the stamp-h file. |
| # This file resides in the same directory as the config header |
| # that is generated. The stamp files are numbered to have different names. |
| |
| # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the |
| # loop where config.status creates the headers, so we can generate |
| # our stamp files there. |
| AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], |
| [# Compute $1's index in $config_headers. |
| _am_arg=$1 |
| _am_stamp_count=1 |
| for _am_header in $config_headers :; do |
| case $_am_header in |
| $_am_arg | $_am_arg:* ) |
| break ;; |
| * ) |
| _am_stamp_count=`expr $_am_stamp_count + 1` ;; |
| esac |
| done |
| echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) |
| |
| # Copyright (C) 2001-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_PROG_INSTALL_SH |
| # ------------------ |
| # Define $install_sh. |
| AC_DEFUN([AM_PROG_INSTALL_SH], |
| [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl |
| if test x"${install_sh+set}" != xset; then |
| case $am_aux_dir in |
| *\ * | *\ *) |
| install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; |
| *) |
| install_sh="\${SHELL} $am_aux_dir/install-sh" |
| esac |
| fi |
| AC_SUBST([install_sh])]) |
| |
| # Copyright (C) 2003-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # Check whether the underlying file-system supports filenames |
| # with a leading dot. For instance MS-DOS doesn't. |
| AC_DEFUN([AM_SET_LEADING_DOT], |
| [rm -rf .tst 2>/dev/null |
| mkdir .tst 2>/dev/null |
| if test -d .tst; then |
| am__leading_dot=. |
| else |
| am__leading_dot=_ |
| fi |
| rmdir .tst 2>/dev/null |
| AC_SUBST([am__leading_dot])]) |
| |
| # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- |
| # From Jim Meyering |
| |
| # Copyright (C) 1996-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_MAINTAINER_MODE([DEFAULT-MODE]) |
| # ---------------------------------- |
| # Control maintainer-specific portions of Makefiles. |
| # Default is to disable them, unless 'enable' is passed literally. |
| # For symmetry, 'disable' may be passed as well. Anyway, the user |
| # can override the default with the --enable/--disable switch. |
| AC_DEFUN([AM_MAINTAINER_MODE], |
| [m4_case(m4_default([$1], [disable]), |
| [enable], [m4_define([am_maintainer_other], [disable])], |
| [disable], [m4_define([am_maintainer_other], [enable])], |
| [m4_define([am_maintainer_other], [enable]) |
| m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) |
| AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) |
| dnl maintainer-mode's default is 'disable' unless 'enable' is passed |
| AC_ARG_ENABLE([maintainer-mode], |
| [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], |
| am_maintainer_other[ make rules and dependencies not useful |
| (and sometimes confusing) to the casual installer])], |
| [USE_MAINTAINER_MODE=$enableval], |
| [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) |
| AC_MSG_RESULT([$USE_MAINTAINER_MODE]) |
| AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) |
| MAINT=$MAINTAINER_MODE_TRUE |
| AC_SUBST([MAINT])dnl |
| ] |
| ) |
| |
| # Check to see how 'make' treats includes. -*- Autoconf -*- |
| |
| # Copyright (C) 2001-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_MAKE_INCLUDE() |
| # ----------------- |
| # Check whether make has an 'include' directive that can support all |
| # the idioms we need for our automatic dependency tracking code. |
| AC_DEFUN([AM_MAKE_INCLUDE], |
| [AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) |
| cat > confinc.mk << 'END' |
| am__doit: |
| @echo this is the am__doit target >confinc.out |
| .PHONY: am__doit |
| END |
| am__include="#" |
| am__quote= |
| # BSD make does it like this. |
| echo '.include "confinc.mk" # ignored' > confmf.BSD |
| # Other make implementations (GNU, Solaris 10, AIX) do it like this. |
| echo 'include confinc.mk # ignored' > confmf.GNU |
| _am_result=no |
| for s in GNU BSD; do |
| AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) |
| AS_CASE([$?:`cat confinc.out 2>/dev/null`], |
| ['0:this is the am__doit target'], |
| [AS_CASE([$s], |
| [BSD], [am__include='.include' am__quote='"'], |
| [am__include='include' am__quote=''])]) |
| if test "$am__include" != "#"; then |
| _am_result="yes ($s style)" |
| break |
| fi |
| done |
| rm -f confinc.* confmf.* |
| AC_MSG_RESULT([${_am_result}]) |
| AC_SUBST([am__include])]) |
| AC_SUBST([am__quote])]) |
| |
| # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- |
| |
| # Copyright (C) 1997-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_MISSING_PROG(NAME, PROGRAM) |
| # ------------------------------ |
| AC_DEFUN([AM_MISSING_PROG], |
| [AC_REQUIRE([AM_MISSING_HAS_RUN]) |
| $1=${$1-"${am_missing_run}$2"} |
| AC_SUBST($1)]) |
| |
| # AM_MISSING_HAS_RUN |
| # ------------------ |
| # Define MISSING if not defined so far and test if it is modern enough. |
| # If it is, set am_missing_run to use it, otherwise, to nothing. |
| AC_DEFUN([AM_MISSING_HAS_RUN], |
| [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl |
| AC_REQUIRE_AUX_FILE([missing])dnl |
| if test x"${MISSING+set}" != xset; then |
| MISSING="\${SHELL} '$am_aux_dir/missing'" |
| fi |
| # Use eval to expand $SHELL |
| if eval "$MISSING --is-lightweight"; then |
| am_missing_run="$MISSING " |
| else |
| am_missing_run= |
| AC_MSG_WARN(['missing' script is too old or missing]) |
| fi |
| ]) |
| |
| # Helper functions for option handling. -*- Autoconf -*- |
| |
| # Copyright (C) 2001-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_MANGLE_OPTION(NAME) |
| # ----------------------- |
| AC_DEFUN([_AM_MANGLE_OPTION], |
| [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) |
| |
| # _AM_SET_OPTION(NAME) |
| # -------------------- |
| # Set option NAME. Presently that only means defining a flag for this option. |
| AC_DEFUN([_AM_SET_OPTION], |
| [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) |
| |
| # _AM_SET_OPTIONS(OPTIONS) |
| # ------------------------ |
| # OPTIONS is a space-separated list of Automake options. |
| AC_DEFUN([_AM_SET_OPTIONS], |
| [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) |
| |
| # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) |
| # ------------------------------------------- |
| # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. |
| AC_DEFUN([_AM_IF_OPTION], |
| [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) |
| |
| # Copyright (C) 1999-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_PROG_CC_C_O |
| # --------------- |
| # Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC |
| # to automatically call this. |
| AC_DEFUN([_AM_PROG_CC_C_O], |
| [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl |
| AC_REQUIRE_AUX_FILE([compile])dnl |
| AC_LANG_PUSH([C])dnl |
| AC_CACHE_CHECK( |
| [whether $CC understands -c and -o together], |
| [am_cv_prog_cc_c_o], |
| [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) |
| # Make sure it works both with $CC and with simple cc. |
| # Following AC_PROG_CC_C_O, we do the test twice because some |
| # compilers refuse to overwrite an existing .o file with -o, |
| # though they will create one. |
| am_cv_prog_cc_c_o=yes |
| for am_i in 1 2; do |
| if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ |
| && test -f conftest2.$ac_objext; then |
| : OK |
| else |
| am_cv_prog_cc_c_o=no |
| break |
| fi |
| done |
| rm -f core conftest* |
| unset am_i]) |
| if test "$am_cv_prog_cc_c_o" != yes; then |
| # Losing compiler, so override with the script. |
| # FIXME: It is wrong to rewrite CC. |
| # But if we don't then we get into trouble of one sort or another. |
| # A longer-term fix would be to have automake use am__CC in this case, |
| # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" |
| CC="$am_aux_dir/compile $CC" |
| fi |
| AC_LANG_POP([C])]) |
| |
| # For backward compatibility. |
| AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) |
| |
| # Copyright (C) 2022-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_PROG_RM_F |
| # --------------- |
| # Check whether 'rm -f' without any arguments works. |
| # https://bugs.gnu.org/10828 |
| AC_DEFUN([_AM_PROG_RM_F], |
| [am__rm_f_notfound= |
| AS_IF([(rm -f && rm -fr && rm -rf) 2>/dev/null], [], [am__rm_f_notfound='""']) |
| AC_SUBST(am__rm_f_notfound) |
| ]) |
| |
| # Copyright (C) 2001-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_RUN_LOG(COMMAND) |
| # ------------------- |
| # Run COMMAND, save the exit status in ac_status, and log it. |
| # (This has been adapted from Autoconf's _AC_RUN_LOG macro.) |
| AC_DEFUN([AM_RUN_LOG], |
| [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD |
| ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD |
| ac_status=$? |
| echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD |
| (exit $ac_status); }]) |
| |
| # Check to make sure that the build environment is sane. -*- Autoconf -*- |
| |
| # Copyright (C) 1996-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_SLEEP_FRACTIONAL_SECONDS |
| # ---------------------------- |
| AC_DEFUN([_AM_SLEEP_FRACTIONAL_SECONDS], [dnl |
| AC_CACHE_CHECK([whether sleep supports fractional seconds], |
| am_cv_sleep_fractional_seconds, [dnl |
| AS_IF([sleep 0.001 2>/dev/null], [am_cv_sleep_fractional_seconds=yes], |
| [am_cv_sleep_fractional_seconds=no]) |
| ])]) |
| |
| # _AM_FILESYSTEM_TIMESTAMP_RESOLUTION |
| # ----------------------------------- |
| # Determine the filesystem's resolution for file modification |
| # timestamps. The coarsest we know of is FAT, with a resolution |
| # of only two seconds, even with the most recent "exFAT" extensions. |
| # The finest (e.g. ext4 with large inodes, XFS, ZFS) is one |
| # nanosecond, matching clock_gettime. However, it is probably not |
| # possible to delay execution of a shell script for less than one |
| # millisecond, due to process creation overhead and scheduling |
| # granularity, so we don't check for anything finer than that. (See below.) |
| AC_DEFUN([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION], [dnl |
| AC_REQUIRE([_AM_SLEEP_FRACTIONAL_SECONDS]) |
| AC_CACHE_CHECK([filesystem timestamp resolution], |
| am_cv_filesystem_timestamp_resolution, [dnl |
| # Default to the worst case. |
| am_cv_filesystem_timestamp_resolution=2 |
| |
| # Only try to go finer than 1 sec if sleep can do it. |
| # Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work, |
| # - 1 sec is not much of a win compared to 2 sec, and |
| # - it takes 2 seconds to perform the test whether 1 sec works. |
| # |
| # Instead, just use the default 2s on platforms that have 1s resolution, |
| # accept the extra 1s delay when using $sleep in the Automake tests, in |
| # exchange for not incurring the 2s delay for running the test for all |
| # packages. |
| # |
| am_try_resolutions= |
| if test "$am_cv_sleep_fractional_seconds" = yes; then |
| # Even a millisecond often causes a bunch of false positives, |
| # so just try a hundredth of a second. The time saved between .001 and |
| # .01 is not terribly consequential. |
| am_try_resolutions="0.01 0.1 $am_try_resolutions" |
| fi |
| |
| # In order to catch current-generation FAT out, we must *modify* files |
| # that already exist; the *creation* timestamp is finer. Use names |
| # that make ls -t sort them differently when they have equal |
| # timestamps than when they have distinct timestamps, keeping |
| # in mind that ls -t prints the *newest* file first. |
| rm -f conftest.ts? |
| : > conftest.ts1 |
| : > conftest.ts2 |
| : > conftest.ts3 |
| |
| # Make sure ls -t actually works. Do 'set' in a subshell so we don't |
| # clobber the current shell's arguments. (Outer-level square brackets |
| # are removed by m4; they're present so that m4 does not expand |
| # <dollar><star>; be careful, easy to get confused.) |
| if ( |
| set X `[ls -t conftest.ts[12]]` && |
| { |
| test "$[]*" != "X conftest.ts1 conftest.ts2" || |
| test "$[]*" != "X conftest.ts2 conftest.ts1"; |
| } |
| ); then :; else |
| # If neither matched, then we have a broken ls. This can happen |
| # if, for instance, CONFIG_SHELL is bash and it inherits a |
| # broken ls alias from the environment. This has actually |
| # happened. Such a system could not be considered "sane". |
| _AS_ECHO_UNQUOTED( |
| ["Bad output from ls -t: \"`[ls -t conftest.ts[12]]`\""], |
| [AS_MESSAGE_LOG_FD]) |
| AC_MSG_FAILURE([ls -t produces unexpected output. |
| Make sure there is not a broken ls alias in your environment.]) |
| fi |
| |
| for am_try_res in $am_try_resolutions; do |
| # Any one fine-grained sleep might happen to cross the boundary |
| # between two values of a coarser actual resolution, but if we do |
| # two fine-grained sleeps in a row, at least one of them will fall |
| # entirely within a coarse interval. |
| echo alpha > conftest.ts1 |
| sleep $am_try_res |
| echo beta > conftest.ts2 |
| sleep $am_try_res |
| echo gamma > conftest.ts3 |
| |
| # We assume that 'ls -t' will make use of high-resolution |
| # timestamps if the operating system supports them at all. |
| if (set X `ls -t conftest.ts?` && |
| test "$[]2" = conftest.ts3 && |
| test "$[]3" = conftest.ts2 && |
| test "$[]4" = conftest.ts1); then |
| # |
| # Ok, ls -t worked. If we're at a resolution of 1 second, we're done, |
| # because we don't need to test make. |
| make_ok=true |
| if test $am_try_res != 1; then |
| # But if we've succeeded so far with a subsecond resolution, we |
| # have one more thing to check: make. It can happen that |
| # everything else supports the subsecond mtimes, but make doesn't; |
| # notably on macOS, which ships make 3.81 from 2006 (the last one |
| # released under GPLv2). https://bugs.gnu.org/68808 |
| # |
| # We test $MAKE if it is defined in the environment, else "make". |
| # It might get overridden later, but our hope is that in practice |
| # it does not matter: it is the system "make" which is (by far) |
| # the most likely to be broken, whereas if the user overrides it, |
| # probably they did so with a better, or at least not worse, make. |
| # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html |
| # |
| # Create a Makefile (real tab character here): |
| rm -f conftest.mk |
| echo 'conftest.ts1: conftest.ts2' >conftest.mk |
| echo ' touch conftest.ts2' >>conftest.mk |
| # |
| # Now, running |
| # touch conftest.ts1; touch conftest.ts2; make |
| # should touch ts1 because ts2 is newer. This could happen by luck, |
| # but most often, it will fail if make's support is insufficient. So |
| # test for several consecutive successes. |
| # |
| # (We reuse conftest.ts[12] because we still want to modify existing |
| # files, not create new ones, per above.) |
| n=0 |
| make=${MAKE-make} |
| until test $n -eq 3; do |
| echo one > conftest.ts1 |
| sleep $am_try_res |
| echo two > conftest.ts2 # ts2 should now be newer than ts1 |
| if $make -f conftest.mk | grep 'up to date' >/dev/null; then |
| make_ok=false |
| break # out of $n loop |
| fi |
| n=`expr $n + 1` |
| done |
| fi |
| # |
| if $make_ok; then |
| # Everything we know to check worked out, so call this resolution good. |
| am_cv_filesystem_timestamp_resolution=$am_try_res |
| break # out of $am_try_res loop |
| fi |
| # Otherwise, we'll go on to check the next resolution. |
| fi |
| done |
| rm -f conftest.ts? |
| # (end _am_filesystem_timestamp_resolution) |
| ])]) |
| |
| # AM_SANITY_CHECK |
| # --------------- |
| AC_DEFUN([AM_SANITY_CHECK], |
| [AC_REQUIRE([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION]) |
| # This check should not be cached, as it may vary across builds of |
| # different projects. |
| AC_MSG_CHECKING([whether build environment is sane]) |
| # Reject unsafe characters in $srcdir or the absolute working directory |
| # name. Accept space and tab only in the latter. |
| am_lf=' |
| ' |
| case `pwd` in |
| *[[\\\"\#\$\&\'\`$am_lf]]*) |
| AC_MSG_ERROR([unsafe absolute working directory name]);; |
| esac |
| case $srcdir in |
| *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) |
| AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; |
| esac |
| |
| # Do 'set' in a subshell so we don't clobber the current shell's |
| # arguments. Must try -L first in case configure is actually a |
| # symlink; some systems play weird games with the mod time of symlinks |
| # (eg FreeBSD returns the mod time of the symlink's containing |
| # directory). |
| am_build_env_is_sane=no |
| am_has_slept=no |
| rm -f conftest.file |
| for am_try in 1 2; do |
| echo "timestamp, slept: $am_has_slept" > conftest.file |
| if ( |
| set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` |
| if test "$[]*" = "X"; then |
| # -L didn't work. |
| set X `ls -t "$srcdir/configure" conftest.file` |
| fi |
| test "$[]2" = conftest.file |
| ); then |
| am_build_env_is_sane=yes |
| break |
| fi |
| # Just in case. |
| sleep "$am_cv_filesystem_timestamp_resolution" |
| am_has_slept=yes |
| done |
| |
| AC_MSG_RESULT([$am_build_env_is_sane]) |
| if test "$am_build_env_is_sane" = no; then |
| AC_MSG_ERROR([newly created file is older than distributed files! |
| Check your system clock]) |
| fi |
| |
| # If we didn't sleep, we still need to ensure time stamps of config.status and |
| # generated files are strictly newer. |
| am_sleep_pid= |
| AS_IF([test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1],, [dnl |
| ( sleep "$am_cv_filesystem_timestamp_resolution" ) & |
| am_sleep_pid=$! |
| ]) |
| AC_CONFIG_COMMANDS_PRE( |
| [AC_MSG_CHECKING([that generated files are newer than configure]) |
| if test -n "$am_sleep_pid"; then |
| # Hide warnings about reused PIDs. |
| wait $am_sleep_pid 2>/dev/null |
| fi |
| AC_MSG_RESULT([done])]) |
| rm -f conftest.file |
| ]) |
| |
| # Copyright (C) 2009-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_SILENT_RULES |
| # ---------------- |
| # Enable less verbose build rules support. |
| AC_DEFUN([_AM_SILENT_RULES], |
| [AM_DEFAULT_VERBOSITY=1 |
| AC_ARG_ENABLE([silent-rules], [dnl |
| AS_HELP_STRING( |
| [--enable-silent-rules], |
| [less verbose build output (undo: "make V=1")]) |
| AS_HELP_STRING( |
| [--disable-silent-rules], |
| [verbose build output (undo: "make V=0")])dnl |
| ]) |
| dnl |
| dnl A few 'make' implementations (e.g., NonStop OS and NextStep) |
| dnl do not support nested variable expansions. |
| dnl See automake bug#9928 and bug#10237. |
| am_make=${MAKE-make} |
| AC_CACHE_CHECK([whether $am_make supports nested variables], |
| [am_cv_make_support_nested_variables], |
| [if AS_ECHO([['TRUE=$(BAR$(V)) |
| BAR0=false |
| BAR1=true |
| V=1 |
| am__doit: |
| @$(TRUE) |
| .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then |
| am_cv_make_support_nested_variables=yes |
| else |
| am_cv_make_support_nested_variables=no |
| fi]) |
| AC_SUBST([AM_V])dnl |
| AM_SUBST_NOTMAKE([AM_V])dnl |
| AC_SUBST([AM_DEFAULT_V])dnl |
| AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl |
| AC_SUBST([AM_DEFAULT_VERBOSITY])dnl |
| AM_BACKSLASH='\' |
| AC_SUBST([AM_BACKSLASH])dnl |
| _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl |
| dnl Delay evaluation of AM_DEFAULT_VERBOSITY to the end to allow multiple calls |
| dnl to AM_SILENT_RULES to change the default value. |
| AC_CONFIG_COMMANDS_PRE([dnl |
| case $enable_silent_rules in @%:@ ((( |
| yes) AM_DEFAULT_VERBOSITY=0;; |
| no) AM_DEFAULT_VERBOSITY=1;; |
| esac |
| if test $am_cv_make_support_nested_variables = yes; then |
| dnl Using '$V' instead of '$(V)' breaks IRIX make. |
| AM_V='$(V)' |
| AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' |
| else |
| AM_V=$AM_DEFAULT_VERBOSITY |
| AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY |
| fi |
| ])dnl |
| ]) |
| |
| # AM_SILENT_RULES([DEFAULT]) |
| # -------------------------- |
| # Set the default verbosity level to DEFAULT ("yes" being less verbose, "no" or |
| # empty being verbose). |
| AC_DEFUN([AM_SILENT_RULES], |
| [AC_REQUIRE([_AM_SILENT_RULES]) |
| AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1])]) |
| |
| # Copyright (C) 2001-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_PROG_INSTALL_STRIP |
| # --------------------- |
| # One issue with vendor 'install' (even GNU) is that you can't |
| # specify the program used to strip binaries. This is especially |
| # annoying in cross-compiling environments, where the build's strip |
| # is unlikely to handle the host's binaries. |
| # Fortunately install-sh will honor a STRIPPROG variable, so we |
| # always use install-sh in "make install-strip", and initialize |
| # STRIPPROG with the value of the STRIP variable (set by the user). |
| AC_DEFUN([AM_PROG_INSTALL_STRIP], |
| [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl |
| # Installed binaries are usually stripped using 'strip' when the user |
| # run "make install-strip". However 'strip' might not be the right |
| # tool to use in cross-compilation environments, therefore Automake |
| # will honor the 'STRIP' environment variable to overrule this program. |
| dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. |
| if test "$cross_compiling" != no; then |
| AC_CHECK_TOOL([STRIP], [strip], :) |
| fi |
| INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" |
| AC_SUBST([INSTALL_STRIP_PROGRAM])]) |
| |
| # Copyright (C) 2006-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_SUBST_NOTMAKE(VARIABLE) |
| # --------------------------- |
| # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. |
| # This macro is traced by Automake. |
| AC_DEFUN([_AM_SUBST_NOTMAKE]) |
| |
| # AM_SUBST_NOTMAKE(VARIABLE) |
| # -------------------------- |
| # Public sister of _AM_SUBST_NOTMAKE. |
| AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) |
| |
| # Check how to create a tarball. -*- Autoconf -*- |
| |
| # Copyright (C) 2004-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_PROG_TAR(FORMAT) |
| # -------------------- |
| # Check how to create a tarball in format FORMAT. |
| # FORMAT should be one of 'v7', 'ustar', or 'pax'. |
| # |
| # Substitute a variable $(am__tar) that is a command |
| # writing to stdout a FORMAT-tarball containing the directory |
| # $tardir. |
| # tardir=directory && $(am__tar) > result.tar |
| # |
| # Substitute a variable $(am__untar) that extract such |
| # a tarball read from stdin. |
| # $(am__untar) < result.tar |
| # |
| AC_DEFUN([_AM_PROG_TAR], |
| [# Always define AMTAR for backward compatibility. Yes, it's still used |
| # in the wild :-( We should find a proper way to deprecate it ... |
| AC_SUBST([AMTAR], ['$${TAR-tar}']) |
| |
| # We'll loop over all known methods to create a tar archive until one works. |
| _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' |
| |
| m4_if([$1], [v7], |
| [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], |
| |
| [m4_case([$1], |
| [ustar], |
| [# The POSIX 1988 'ustar' format is defined with fixed-size fields. |
| # There is notably a 21 bits limit for the UID and the GID. In fact, |
| # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 |
| # and bug#13588). |
| am_max_uid=2097151 # 2^21 - 1 |
| am_max_gid=$am_max_uid |
| # The $UID and $GID variables are not portable, so we need to resort |
| # to the POSIX-mandated id(1) utility. Errors in the 'id' calls |
| # below are definitely unexpected, so allow the users to see them |
| # (that is, avoid stderr redirection). |
| am_uid=`id -u || echo unknown` |
| am_gid=`id -g || echo unknown` |
| AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) |
| if test x$am_uid = xunknown; then |
| AC_MSG_WARN([ancient id detected; assuming current UID is ok, but dist-ustar might not work]) |
| elif test $am_uid -le $am_max_uid; then |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no]) |
| _am_tools=none |
| fi |
| AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) |
| if test x$gm_gid = xunknown; then |
| AC_MSG_WARN([ancient id detected; assuming current GID is ok, but dist-ustar might not work]) |
| elif test $am_gid -le $am_max_gid; then |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no]) |
| _am_tools=none |
| fi], |
| |
| [pax], |
| [], |
| |
| [m4_fatal([Unknown tar format])]) |
| |
| AC_MSG_CHECKING([how to create a $1 tar archive]) |
| |
| # Go ahead even if we have the value already cached. We do so because we |
| # need to set the values for the 'am__tar' and 'am__untar' variables. |
| _am_tools=${am_cv_prog_tar_$1-$_am_tools} |
| |
| for _am_tool in $_am_tools; do |
| case $_am_tool in |
| gnutar) |
| for _am_tar in tar gnutar gtar; do |
| AM_RUN_LOG([$_am_tar --version]) && break |
| done |
| am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' |
| am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' |
| am__untar="$_am_tar -xf -" |
| ;; |
| plaintar) |
| # Must skip GNU tar: if it does not support --format= it doesn't create |
| # ustar tarball either. |
| (tar --version) >/dev/null 2>&1 && continue |
| am__tar='tar chf - "$$tardir"' |
| am__tar_='tar chf - "$tardir"' |
| am__untar='tar xf -' |
| ;; |
| pax) |
| am__tar='pax -L -x $1 -w "$$tardir"' |
| am__tar_='pax -L -x $1 -w "$tardir"' |
| am__untar='pax -r' |
| ;; |
| cpio) |
| am__tar='find "$$tardir" -print | cpio -o -H $1 -L' |
| am__tar_='find "$tardir" -print | cpio -o -H $1 -L' |
| am__untar='cpio -i -H $1 -d' |
| ;; |
| none) |
| am__tar=false |
| am__tar_=false |
| am__untar=false |
| ;; |
| esac |
| |
| # If the value was cached, stop now. We just wanted to have am__tar |
| # and am__untar set. |
| test -n "${am_cv_prog_tar_$1}" && break |
| |
| # tar/untar a dummy directory, and stop if the command works. |
| rm -rf conftest.dir |
| mkdir conftest.dir |
| echo GrepMe > conftest.dir/file |
| AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) |
| rm -rf conftest.dir |
| if test -s conftest.tar; then |
| AM_RUN_LOG([$am__untar <conftest.tar]) |
| AM_RUN_LOG([cat conftest.dir/file]) |
| grep GrepMe conftest.dir/file >/dev/null 2>&1 && break |
| fi |
| done |
| rm -rf conftest.dir |
| |
| AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) |
| AC_MSG_RESULT([$am_cv_prog_tar_$1])]) |
| |
| AC_SUBST([am__tar]) |
| AC_SUBST([am__untar]) |
| ]) # _AM_PROG_TAR |
| |
| # Copyright (C) 2022-2024 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_PROG_XARGS_N |
| # ---------------- |
| # Check whether 'xargs -n' works. It should work everywhere, so the fallback |
| # is not optimized at all as we never expect to use it. |
| AC_DEFUN([_AM_PROG_XARGS_N], |
| [AC_CACHE_CHECK([xargs -n works], am_cv_xargs_n_works, [dnl |
| AS_IF([test "`echo 1 2 3 | xargs -n2 echo`" = "1 2 |
| 3"], [am_cv_xargs_n_works=yes], [am_cv_xargs_n_works=no])]) |
| AS_IF([test "$am_cv_xargs_n_works" = yes], [am__xargs_n='xargs -n'], [dnl |
| am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "$@" "$am__xargs_n_arg"; done; }' |
| ])dnl |
| AC_SUBST(am__xargs_n) |
| ]) |
| |
| m4_include([auxdir/ax_check_compile_flag.m4]) |
| m4_include([auxdir/ax_compare_version.m4]) |
| m4_include([auxdir/ax_gcc_builtin.m4]) |
| m4_include([auxdir/ax_have_epoll.m4]) |
| m4_include([auxdir/ax_lib_hdf5.m4]) |
| m4_include([auxdir/ax_pthread.m4]) |
| m4_include([auxdir/gtk-2.0.m4]) |
| m4_include([auxdir/libtool.m4]) |
| m4_include([auxdir/ltoptions.m4]) |
| m4_include([auxdir/ltsugar.m4]) |
| m4_include([auxdir/ltversion.m4]) |
| m4_include([auxdir/lt~obsolete.m4]) |
| m4_include([auxdir/slurm.m4]) |
| m4_include([auxdir/slurmrestd.m4]) |
| m4_include([auxdir/x_ac_affinity.m4]) |
| m4_include([auxdir/x_ac_bashcomp.m4]) |
| m4_include([auxdir/x_ac_c99.m4]) |
| m4_include([auxdir/x_ac_cgroup.m4]) |
| m4_include([auxdir/x_ac_curl.m4]) |
| m4_include([auxdir/x_ac_databases.m4]) |
| m4_include([auxdir/x_ac_debug.m4]) |
| m4_include([auxdir/x_ac_deprecated.m4]) |
| m4_include([auxdir/x_ac_env.m4]) |
| m4_include([auxdir/x_ac_freeipmi.m4]) |
| m4_include([auxdir/x_ac_hpe_slingshot.m4]) |
| m4_include([auxdir/x_ac_http_parser.m4]) |
| m4_include([auxdir/x_ac_hwloc.m4]) |
| m4_include([auxdir/x_ac_json.m4]) |
| m4_include([auxdir/x_ac_jwt.m4]) |
| m4_include([auxdir/x_ac_lua.m4]) |
| m4_include([auxdir/x_ac_lz4.m4]) |
| m4_include([auxdir/x_ac_man2html.m4]) |
| m4_include([auxdir/x_ac_munge.m4]) |
| m4_include([auxdir/x_ac_nvml.m4]) |
| m4_include([auxdir/x_ac_ofed.m4]) |
| m4_include([auxdir/x_ac_oneapi.m4]) |
| m4_include([auxdir/x_ac_pam.m4]) |
| m4_include([auxdir/x_ac_pkgconfig.m4]) |
| m4_include([auxdir/x_ac_pmix.m4]) |
| m4_include([auxdir/x_ac_printf_null.m4]) |
| m4_include([auxdir/x_ac_ptrace.m4]) |
| m4_include([auxdir/x_ac_rdkafka.m4]) |
| m4_include([auxdir/x_ac_readline.m4]) |
| m4_include([auxdir/x_ac_rsmi.m4]) |
| m4_include([auxdir/x_ac_s2n.m4]) |
| m4_include([auxdir/x_ac_selinux.m4]) |
| m4_include([auxdir/x_ac_setproctitle.m4]) |
| m4_include([auxdir/x_ac_sview.m4]) |
| m4_include([auxdir/x_ac_systemd.m4]) |
| m4_include([auxdir/x_ac_ucx.m4]) |
| m4_include([auxdir/x_ac_uid_gid_size.m4]) |
| m4_include([auxdir/x_ac_x11.m4]) |
| m4_include([auxdir/x_ac_yaml.m4]) |