| /*****************************************************************************\ |
| * node_info.c - get/print the node state information of slurm |
| * $Id$ |
| ***************************************************************************** |
| * Copyright (C) 2002-2006 The Regents of the University of California. |
| * Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER). |
| * Written by Morris Jette <jette1@llnl.gov> et. al. |
| * UCRL-CODE-226842. |
| * |
| * This file is part of SLURM, a resource management program. |
| * For details, see <http://www.llnl.gov/linux/slurm/>. |
| * |
| * SLURM is free software; you can redistribute it and/or modify it under |
| * the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * In addition, as a special exception, the copyright holders give permission |
| * to link the code of portions of this program with the OpenSSL library under |
| * certain conditions as described in each individual source file, and |
| * distribute linked combinations including the two. You must obey the GNU |
| * General Public License in all respects for all of the code used other than |
| * OpenSSL. If you modify file(s) with this exception, you may extend this |
| * exception to your version of the file(s), but you are not obligated to do |
| * so. If you do not wish to do so, delete this exception statement from your |
| * version. If you delete this exception statement from all source files in |
| * the program, then also delete it here. |
| * |
| * SLURM is distributed in the hope that it will be useful, but WITHOUT ANY |
| * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS |
| * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with SLURM; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| \*****************************************************************************/ |
| |
| #ifdef HAVE_CONFIG_H |
| # include "config.h" |
| #endif |
| |
| #ifdef HAVE_SYS_SYSLOG_H |
| # include <sys/syslog.h> |
| #endif |
| |
| #include <errno.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <syslog.h> |
| #include <netinet/in.h> |
| #include <arpa/inet.h> |
| #include <unistd.h> |
| |
| #include <slurm/slurm.h> |
| |
| #include "src/common/parse_time.h" |
| #include "src/common/slurm_protocol_api.h" |
| #include "src/common/xmalloc.h" |
| #include "src/common/xstring.h" |
| |
| /* |
| * slurm_print_node_info_msg - output information about all Slurm nodes |
| * based upon message as loaded using slurm_load_node |
| * IN out - file to write to |
| * IN node_info_msg_ptr - node information message pointer |
| * IN one_liner - print as a single line if true |
| */ |
| void |
| slurm_print_node_info_msg ( FILE * out, node_info_msg_t * node_info_msg_ptr, |
| int one_liner ) |
| { |
| int i; |
| node_info_t * node_ptr = node_info_msg_ptr -> node_array ; |
| char time_str[32]; |
| |
| slurm_make_time_str ((time_t *)&node_info_msg_ptr->last_update, |
| time_str, sizeof(time_str)); |
| fprintf( out, "Node data as of %s, record count %d\n", |
| time_str, node_info_msg_ptr->record_count); |
| |
| for (i = 0; i < node_info_msg_ptr-> record_count; i++) { |
| slurm_print_node_table ( out, & node_ptr[i], one_liner ) ; |
| } |
| } |
| |
| |
| /* |
| * slurm_print_node_table - output information about a specific Slurm nodes |
| * based upon message as loaded using slurm_load_node |
| * IN out - file to write to |
| * IN node_ptr - an individual node information record pointer |
| * IN one_liner - print as a single line if true |
| */ |
| void |
| slurm_print_node_table ( FILE * out, node_info_t * node_ptr, int one_liner ) |
| { |
| char *print_this = slurm_sprint_node_table(node_ptr, one_liner); |
| fprintf ( out, "%s", print_this); |
| xfree(print_this); |
| } |
| |
| /* |
| * slurm_sprint_node_table - output information about a specific Slurm nodes |
| * based upon message as loaded using slurm_load_node |
| * IN node_ptr - an individual node information record pointer |
| * IN one_liner - print as a single line if true |
| * RET out - char * containing formatted output (must be freed after call) |
| * NULL is returned on failure. |
| */ |
| char * |
| slurm_sprint_node_table (node_info_t * node_ptr, int one_liner ) |
| { |
| uint16_t my_state = node_ptr->node_state; |
| char *comp_str = "", *drain_str = ""; |
| char tmp_line[512]; |
| char *out = NULL; |
| |
| if (my_state & NODE_STATE_COMPLETING) { |
| my_state &= (~NODE_STATE_COMPLETING); |
| comp_str = "+COMPLETING"; |
| } |
| if (my_state & NODE_STATE_DRAIN) { |
| my_state &= (~NODE_STATE_DRAIN); |
| drain_str = "+DRAIN"; |
| } |
| |
| /****** Line 1 ******/ |
| snprintf(tmp_line, sizeof(tmp_line), |
| "NodeName=%s State=%s%s%s CPUs=%u AllocCPUs=%u " |
| "RealMemory=%u TmpDisk=%u", |
| node_ptr->name, node_state_string(my_state), |
| comp_str, drain_str, node_ptr->cpus, node_ptr->used_cpus, |
| node_ptr->real_memory, node_ptr->tmp_disk); |
| xstrcat(out, tmp_line); |
| if (one_liner) |
| xstrcat(out, " "); |
| else |
| xstrcat(out, "\n "); |
| |
| /****** Line 2 ******/ |
| snprintf(tmp_line, sizeof(tmp_line), |
| "Sockets=%u Cores=%u Threads=%u " |
| "Weight=%u Features=%s Reason=%s" , |
| node_ptr->sockets, node_ptr->cores, node_ptr->threads, |
| node_ptr->weight, node_ptr->features, |
| node_ptr->reason); |
| xstrcat(out, tmp_line); |
| xstrcat(out, "\n"); |
| |
| return out; |
| } |
| |
| |
| /* |
| * slurm_load_node - issue RPC to get slurm all node configuration information |
| * if changed since update_time |
| * IN update_time - time of current configuration data |
| * IN node_info_msg_pptr - place to store a node configuration pointer |
| * IN show_flags - node filtering options |
| * RET 0 or a slurm error code |
| * NOTE: free the response using slurm_free_node_info_msg |
| */ |
| extern int slurm_load_node (time_t update_time, |
| node_info_msg_t **resp, uint16_t show_flags) |
| { |
| int rc; |
| slurm_msg_t req_msg; |
| slurm_msg_t resp_msg; |
| node_info_request_msg_t req; |
| |
| slurm_msg_t_init(&req_msg); |
| slurm_msg_t_init(&resp_msg); |
| req.last_update = update_time; |
| req.show_flags = show_flags; |
| req_msg.msg_type = REQUEST_NODE_INFO; |
| req_msg.data = &req; |
| |
| if (slurm_send_recv_controller_msg(&req_msg, &resp_msg) < 0) |
| return SLURM_ERROR; |
| |
| switch (resp_msg.msg_type) { |
| case RESPONSE_NODE_INFO: |
| *resp = (node_info_msg_t *) resp_msg.data; |
| break; |
| case RESPONSE_SLURM_RC: |
| rc = ((return_code_msg_t *) resp_msg.data)->return_code; |
| slurm_free_return_code_msg(resp_msg.data); |
| if (rc) |
| slurm_seterrno_ret(rc); |
| *resp = NULL; |
| break; |
| default: |
| slurm_seterrno_ret(SLURM_UNEXPECTED_MSG_ERROR); |
| break; |
| } |
| |
| return SLURM_PROTOCOL_SUCCESS; |
| } |