| /*****************************************************************************\ |
| * src/common/eio.c - Event-based I/O for slurm |
| ***************************************************************************** |
| * Copyright (C) 2002 The Regents of the University of California. |
| * Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER). |
| * Written by Mark Grondona <mgrondona@llnl.gov>. |
| * UCRL-CODE-226842. |
| * |
| * This file is part of SLURM, a resource management program. |
| * For details, see <http://www.llnl.gov/linux/slurm/>. |
| * |
| * SLURM is free software; you can redistribute it and/or modify it under |
| * the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * In addition, as a special exception, the copyright holders give permission |
| * to link the code of portions of this program with the OpenSSL library under |
| * certain conditions as described in each individual source file, and |
| * distribute linked combinations including the two. You must obey the GNU |
| * General Public License in all respects for all of the code used other than |
| * OpenSSL. If you modify file(s) with this exception, you may extend this |
| * exception to your version of the file(s), but you are not obligated to do |
| * so. If you do not wish to do so, delete this exception statement from your |
| * version. If you delete this exception statement from all source files in |
| * the program, then also delete it here. |
| * |
| * SLURM is distributed in the hope that it will be useful, but WITHOUT ANY |
| * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS |
| * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with SLURM; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| \*****************************************************************************/ |
| #if HAVE_CONFIG_H |
| # include <config.h> |
| #endif |
| |
| #include <sys/poll.h> |
| #include <unistd.h> |
| #include <errno.h> |
| |
| #include "src/common/xmalloc.h" |
| #include "src/common/xassert.h" |
| #include "src/common/log.h" |
| #include "src/common/list.h" |
| #include "src/common/fd.h" |
| #include "src/common/eio.h" |
| |
| /* |
| * outside threads can stick new objects on the new_objs List and |
| * the eio thread will move them to the main obj_list the next time |
| * it wakes up. |
| */ |
| struct eio_handle_components { |
| #ifndef NDEBUG |
| # define EIO_MAGIC 0xe1e10 |
| int magic; |
| #endif |
| int fds[2]; |
| List obj_list; |
| List new_objs; |
| }; |
| |
| |
| /* Function prototypes |
| */ |
| |
| static int _poll_internal(struct pollfd *pfds, unsigned int nfds); |
| static unsigned int _poll_setup_pollfds(struct pollfd *, eio_obj_t **, List); |
| static void _poll_dispatch(struct pollfd *, unsigned int, eio_obj_t **, |
| List objList); |
| static void _poll_handle_event(short revents, eio_obj_t *obj, |
| List objList); |
| |
| eio_handle_t *eio_handle_create(void) |
| { |
| eio_handle_t *eio = xmalloc(sizeof(*eio)); |
| |
| if (pipe(eio->fds) < 0) { |
| error ("eio_create: pipe: %m"); |
| eio_handle_destroy(eio); |
| return (NULL); |
| } |
| |
| fd_set_nonblocking(eio->fds[0]); |
| fd_set_close_on_exec(eio->fds[0]); |
| fd_set_close_on_exec(eio->fds[1]); |
| |
| xassert(eio->magic = EIO_MAGIC); |
| |
| eio->obj_list = list_create(NULL); /* FIXME! Needs destructor */ |
| eio->new_objs = list_create(NULL); |
| |
| return eio; |
| } |
| |
| void eio_handle_destroy(eio_handle_t *eio) |
| { |
| xassert(eio != NULL); |
| xassert(eio->magic == EIO_MAGIC); |
| close(eio->fds[0]); |
| close(eio->fds[1]); |
| /* FIXME - Destroy obj_list and new_objs */ |
| xassert(eio->magic = ~EIO_MAGIC); |
| xfree(eio); |
| } |
| |
| int eio_signal_shutdown(eio_handle_t *eio) |
| { |
| char c = 1; |
| if (write(eio->fds[1], &c, sizeof(char)) != 1) |
| return error("eio_handle_signal_shutdown: write; %m"); |
| return 0; |
| } |
| |
| int eio_signal_wakeup(eio_handle_t *eio) |
| { |
| char c = 0; |
| if (write(eio->fds[1], &c, sizeof(char)) != 1) |
| return error("eio_handle_signal_wake: write; %m"); |
| return 0; |
| } |
| |
| static void _mark_shutdown_true(List obj_list) |
| { |
| ListIterator objs; |
| eio_obj_t *obj; |
| |
| objs = list_iterator_create(obj_list); |
| while ((obj = list_next(objs))) { |
| obj->shutdown = true; |
| } |
| list_iterator_destroy(objs); |
| } |
| |
| static int _eio_wakeup_handler(eio_handle_t *eio) |
| { |
| char c = 0; |
| int rc = 0; |
| eio_obj_t *obj; |
| |
| while ((rc = (read(eio->fds[0], &c, 1)) > 0)) { |
| if (c == 1) |
| _mark_shutdown_true(eio->obj_list); |
| } |
| |
| /* move new eio objects from the new_objs to the obj_list */ |
| while ((obj = list_dequeue(eio->new_objs))) { |
| list_enqueue(eio->obj_list, obj); |
| } |
| |
| if (rc < 0) return error("eio_clear: read: %m"); |
| |
| return 0; |
| } |
| |
| int eio_handle_mainloop(eio_handle_t *eio) |
| { |
| int retval = 0; |
| struct pollfd *pollfds = NULL; |
| eio_obj_t **map = NULL; |
| unsigned int maxnfds = 0, nfds = 0; |
| unsigned int n = 0; |
| |
| xassert (eio != NULL); |
| xassert (eio->magic == EIO_MAGIC); |
| |
| for (;;) { |
| |
| /* Alloc memory for pfds and map if needed */ |
| n = list_count(eio->obj_list); |
| if (maxnfds < n) { |
| maxnfds = n; |
| xrealloc(pollfds, (maxnfds+1) * sizeof(struct pollfd)); |
| xrealloc(map, maxnfds * sizeof(eio_obj_t * )); |
| /* |
| * Note: xrealloc() also handles initial malloc |
| */ |
| } |
| |
| debug4("eio: handling events for %d objects", |
| list_count(eio->obj_list)); |
| nfds = _poll_setup_pollfds(pollfds, map, eio->obj_list); |
| if (nfds <= 0) |
| goto done; |
| |
| /* |
| * Setup eio handle signalling fd |
| */ |
| pollfds[nfds].fd = eio->fds[0]; |
| pollfds[nfds].events = POLLIN; |
| nfds++; |
| |
| xassert(nfds <= maxnfds + 1); |
| |
| if (_poll_internal(pollfds, nfds) < 0) |
| goto error; |
| |
| if (pollfds[nfds-1].revents & POLLIN) |
| _eio_wakeup_handler(eio); |
| |
| _poll_dispatch(pollfds, nfds-1, map, eio->obj_list); |
| } |
| error: |
| retval = -1; |
| done: |
| xfree(pollfds); |
| xfree(map); |
| return retval; |
| } |
| |
| static int |
| _poll_internal(struct pollfd *pfds, unsigned int nfds) |
| { |
| int n; |
| while ((n = poll(pfds, nfds, -1)) < 0) { |
| switch (errno) { |
| case EINTR : return 0; |
| case EAGAIN: continue; |
| default: |
| error("poll: %m"); |
| return -1; |
| } |
| } |
| return n; |
| } |
| |
| static bool |
| _is_writable(eio_obj_t *obj) |
| { |
| return (obj->ops->writable && (*obj->ops->writable)(obj)); |
| } |
| |
| static bool |
| _is_readable(eio_obj_t *obj) |
| { |
| return (obj->ops->readable && (*obj->ops->readable)(obj)); |
| } |
| |
| static unsigned int |
| _poll_setup_pollfds(struct pollfd *pfds, eio_obj_t *map[], List l) |
| { |
| ListIterator i = list_iterator_create(l); |
| eio_obj_t *obj = NULL; |
| unsigned int nfds = 0; |
| bool readable, writable; |
| |
| while ((obj = list_next(i))) { |
| writable = _is_writable(obj); |
| readable = _is_readable(obj); |
| if (writable && readable) { |
| pfds[nfds].fd = obj->fd; |
| pfds[nfds].events = POLLOUT | POLLIN; |
| map[nfds] = obj; |
| nfds++; |
| } else if (readable) { |
| pfds[nfds].fd = obj->fd; |
| pfds[nfds].events = POLLIN; |
| map[nfds] = obj; |
| nfds++; |
| } else if (writable) { |
| pfds[nfds].fd = obj->fd; |
| pfds[nfds].events = POLLOUT; |
| map[nfds] = obj; |
| nfds++; |
| } |
| } |
| list_iterator_destroy(i); |
| return nfds; |
| } |
| |
| static void |
| _poll_dispatch(struct pollfd *pfds, unsigned int nfds, eio_obj_t *map[], |
| List objList) |
| { |
| int i; |
| |
| for (i = 0; i < nfds; i++) { |
| if (pfds[i].revents > 0) |
| _poll_handle_event(pfds[i].revents, map[i], objList); |
| } |
| } |
| |
| static void |
| _poll_handle_event(short revents, eio_obj_t *obj, List objList) |
| { |
| bool read_called = false; |
| bool write_called = false; |
| |
| if (revents & (POLLERR|POLLNVAL)) { |
| if (obj->ops->handle_error) { |
| (*obj->ops->handle_error) (obj, objList); |
| } else if (obj->ops->handle_read) { |
| (*obj->ops->handle_read) (obj, objList); |
| read_called = true; |
| } else if (obj->ops->handle_write) { |
| (*obj->ops->handle_write) (obj, objList); |
| write_called = true; |
| } else { |
| debug("No handler for %s on fd %d", |
| revents & POLLERR ? "POLLERR" : "POLLNVAL", |
| obj->fd); |
| obj->shutdown = true; |
| } |
| return; |
| } |
| |
| if (revents & POLLHUP) { |
| if (obj->ops->handle_close) { |
| (*obj->ops->handle_close) (obj, objList); |
| } else if (obj->ops->handle_read) { |
| if (!read_called) { |
| (*obj->ops->handle_read) (obj, objList); |
| read_called = true; |
| } |
| } else if (obj->ops->handle_write) { |
| if (!write_called) { |
| (*obj->ops->handle_write) (obj, objList); |
| write_called = true; |
| } |
| } else { |
| debug("No handler for POLLHUP"); |
| obj->shutdown = true; |
| } |
| } |
| |
| if (revents & POLLIN) { |
| if (obj->ops->handle_read) { |
| if (!read_called) { |
| (*obj->ops->handle_read ) (obj, objList); |
| read_called = true; |
| } |
| } else { |
| debug("No handler for POLLIN"); |
| obj->shutdown = true; |
| } |
| } |
| |
| if (revents & POLLOUT) { |
| if (obj->ops->handle_write) { |
| if (!write_called) { |
| (*obj->ops->handle_write) (obj, objList); |
| write_called = true; |
| } |
| } else { |
| debug("No handler for POLLOUT"); |
| obj->shutdown = true; |
| } |
| } |
| } |
| |
| static struct io_operations * |
| _ops_copy(struct io_operations *ops) |
| { |
| struct io_operations *ret = xmalloc(sizeof(*ops)); |
| |
| /* Copy initial client_ops */ |
| *ret = *ops; |
| return ret; |
| } |
| |
| eio_obj_t * |
| eio_obj_create(int fd, struct io_operations *ops, void *arg) |
| { |
| eio_obj_t *obj = xmalloc(sizeof(*obj)); |
| obj->fd = fd; |
| obj->arg = arg; |
| obj->ops = _ops_copy(ops); |
| obj->shutdown = false; |
| return obj; |
| } |
| |
| void eio_obj_destroy(eio_obj_t *obj) |
| { |
| if (obj) { |
| if (obj->ops) { |
| xfree(obj->ops); |
| } |
| xfree(obj); |
| } |
| } |
| |
| |
| /* |
| * Add an eio_obj_t "obj" to an eio_handle_t "eio"'s internal object list. |
| * |
| * This function can only be used to intialize "eio"'s list before |
| * calling eio_handle_mainloop. If it is used after the eio engine's |
| * mainloop has started, segfaults are likely. |
| */ |
| void eio_new_initial_obj(eio_handle_t *eio, eio_obj_t *obj) |
| { |
| xassert(eio != NULL); |
| xassert(eio->magic == EIO_MAGIC); |
| |
| list_enqueue(eio->obj_list, obj); |
| } |
| |
| /* |
| * Queue an eio_obj_t "obj" for inclusion in an already running |
| * eio_handle_t "eio"'s internal object list. |
| */ |
| void eio_new_obj(eio_handle_t *eio, eio_obj_t *obj) |
| { |
| xassert(eio != NULL); |
| xassert(eio->magic == EIO_MAGIC); |
| |
| list_enqueue(eio->new_objs, obj); |
| eio_signal_wakeup(eio); |
| } |