| ############################################################################### |
| # Global specifications for BlueGene system |
| # |
| # BlrtsImage: BlrtsImage used for creation of all bgblocks. |
| # LinuxImage: LinuxImage used for creation of all bgblocks. |
| # MloaderImage: MloaderImage used for creation of all bgblocks. |
| # RamDiskImage: RamDiskImage used for creation of all bgblocks. |
| # |
| # You may add extra images which a user can specify from the srun |
| # command line (see man srun). When adding these images you may also add |
| # a Groups= at the end of the image path to specify which groups can |
| # use the image. |
| # |
| # AltBlrtsImage: Alternative BlrtsImage(s). |
| # AltLinuxImage: Alternative LinuxImage(s). |
| # AltMloaderImage: Alternative MloaderImage(s). |
| # AltRamDiskImage: Alternative RamDiskImage(s). |
| # |
| # LayoutMode: Mode in which slurm will create blocks: |
| # STATIC: Use defined non-overlapping bgblocks |
| # OVERLAP: Use defined bgblocks, which may overlap |
| # DYNAMIC: Create bgblocks as needed for each job |
| # BasePartitionNodeCnt: Number of c-nodes per base partition. |
| # NodeCardNodeCnt: Number of c-nodes per node card. |
| # NumPsets: The Numpsets used for creation of all bgblocks |
| # equals this value multiplied by the number of |
| # base partitions in the bgblock. |
| # |
| # BridgeAPILogFile : Pathname of file in which to write the Bridge |
| # API logs. |
| # BridgeAPIVerbose: How verbose the Bridge API logs should be |
| # 0: Log only error and warning messages |
| # 1: Log level 0 and information messasges |
| # 2: Log level 1 and basic debug messages |
| # 3: Log level 2 and more debug message |
| # 4: Log all messages |
| # DenyPassthrough: Prevents use of passthrough ports in specific |
| # dimensions, X, Y, and/or Z, plus ALL |
| # |
| # NOTE: The bgl_serial value is set at configuration time using the |
| # "--with-bgl-serial=" option. Its default value is "BGL". |
| ############################################################################### |
| # These are the default images with are used if the user doesn't specify |
| # which image they want |
| BlrtsImage=/bgl/BlueLight/ppcfloor/bglsys/bin/rts_hw.rts |
| LinuxImage=/bgl/BlueLight/ppcfloor/bglsys/bin/zImage.elf |
| MloaderImage=/bgl/BlueLight/ppcfloor/bglsys/bin/mmcs-mloader.rts |
| RamDiskImage=/bgl/BlueLight/ppcfloor/bglsys/bin/ramdisk.elf |
| |
| #Only group jette can use these images |
| AltBlrtsImage=/bgl/BlueLight/ppcfloor/bglsys/bin/rts_hw2.rts Groups=jette |
| AltLinuxImage=/bgl/BlueLight/ppcfloor/bglsys/bin/zImage2.elf Groups=jette |
| AltMloaderImage=/bgl/BlueLight/ppcfloor/bglsys/bin/mmcs-mloader2.rts Groups=jette |
| AltRamDiskImage=/bgl/BlueLight/ppcfloor/bglsys/bin/ramdisk2.elf Groups=jette |
| |
| # Since no groups are specified here any user can use them |
| AltBlrtsImage=/bgl/BlueLight/ppcfloor/bglsys/bin/rts_hw3.rts |
| AltLinuxImage=/bgl/BlueLight/ppcfloor/bglsys/bin/zImage3.elf |
| AltMloaderImage=/bgl/BlueLight/ppcfloor/bglsys/bin/mmcs-mloader3.rts |
| AltRamDiskImage=/bgl/BlueLight/ppcfloor/bglsys/bin/ramdisk3.elf |
| |
| # Another option for images would be a "You can use anything you like image" * |
| # This allows the user to use any image entered with no security checking |
| AltBlrtsImage=* Groups=da,adamb |
| AltLinuxImage=* Groups=da,adamb |
| AltMloaderImage=* Groups=da,adamb |
| AltRamDiskImage=* Groups=da,adamb |
| |
| LayoutMode=STATIC |
| BasePartitionNodeCnt=512 |
| NodeCardNodeCnt=32 |
| #Numpsets=8 #used for IO poor systems (Can't create 32 cnode blocks) |
| Numpsets=64 #used for IO rich systems |
| |
| BridgeAPILogFile=/var/log/slurm/bridgeapi.log |
| BridgeAPIVerbose=0 |
| |
| #DenyPassthrough=X,Y,Z |
| |
| ############################################################################### |
| # Define the static/overlap partitions (bgblocks) |
| # |
| # Nodes: The base partitions (midplanes) in the bgblock using XYZ coordinates |
| # Type: Connection type "MESH" or "TORUS" or "SMALL", default is "TORUS" |
| # Type SMALL will divide a midplane into multiple bgblock |
| # based on options NodeCards (count of single node card bglblocks) |
| # and Quarters (count of quarter midplane bglblocks) to determine |
| # type of small blocks. |
| # |
| # IMPORTANT NOTES: |
| # * Ordering is very important for laying out switch wires. Please create |
| # blocks with smap, and once done don't change the order of blocks created. |
| # * A bgblock is implicitly created containing all resources on the system |
| # * Bgblocks must not overlap in static mode (except for implicitly |
| # created bgblock). This will be the case when smap is used to create |
| # a configuration file. |
| # * All Nodes defined here must also be defined in the slurm.conf file |
| # * Define only the numeric coordinates of the bgblocks here. The prefix |
| # will be based upon the NodeName defined in slurm.conf. |
| ############################################################################### |
| # LEAVE NEXT LINE AS A COMMENT, Full-system bgblock, implicitly created |
| # BPs=[000x333] Type=TORUS # 4x4x4 = 64 midplanes |
| ############################################################################### |
| # smap bgblock layout here: |
| BPs=[000x133] Type=TORUS # 2x4x4 = 32 |
| BPs=[200x233] Type=TORUS # 1x4x4 = 16 |
| BPs=[300x313] Type=TORUS # 1x2x4 = 8 |
| BPs=[320x323] Type=TORUS # 1x1x4 = 4 |
| BPs=[330x331] Type=TORUS # 1x1x2 = 2 |
| BPs=[332x332] Type=TORUS # 1x1x1 = 1 |
| BPs=[333x333] Type=SMALL NodeCards=4 Quarters=3 # 1x1x1 = 4-32 c-node blocks 3-128 c-node blocks |
