src/scontrol/update_node.c

/*****************************************************************************\
 *  update_node.c - node update function for scontrol.
 *****************************************************************************
 *  Copyright (C) 2002-2007 The Regents of the University of California.
 *  Copyright (C) 2008-2010 Lawrence Livermore National Security.
 *  Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
 *  Written by Morris Jette <jette1@llnl.gov>
 *  CODE-OCEC-09-009. All rights reserved.
 *
 *  This file is part of SLURM, a resource management program.
 *  For details, see <http://www.schedmd.com/slurmdocs/>.
 *  Please also read the included file: DISCLAIMER.
 *
 *  SLURM is free software; you can redistribute it and/or modify it under
 *  the terms of the GNU General Public License as published by the Free
 *  Software Foundation; either version 2 of the License, or (at your option)
 *  any later version.
 *
 *  In addition, as a special exception, the copyright holders give permission
 *  to link the code of portions of this program with the OpenSSL library under
 *  certain conditions as described in each individual source file, and
 *  distribute linked combinations including the two. You must obey the GNU
 *  General Public License in all respects for all of the code used other than
 *  OpenSSL. If you modify file(s) with this exception, you may extend this
 *  exception to your version of the file(s), but you are not obligated to do
 *  so. If you do not wish to do so, delete this exception statement from your
 *  version.  If you delete this exception statement from all source files in
 *  the program, then also delete it here.
 *
 *  SLURM is distributed in the hope that it will be useful, but WITHOUT ANY
 *  WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
 *  FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
 *  details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with SLURM; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA.
\*****************************************************************************/

#include "scontrol.h"
#include "src/common/uid.h"

/*
 * scontrol_update_node - update the slurm node configuration per the supplied
 *	arguments
 * IN argc - count of arguments
 * IN argv - list of arguments
 * RET 0 if no slurm error, errno otherwise. parsing error prints
 *			error message and returns 0
 */
extern int
scontrol_update_node (int argc, char *argv[])
{
	int i, j, k, rc = 0, update_cnt = 0;

	uint16_t state_val;
	update_node_msg_t node_msg;
	char *reason_str = NULL;
	char *tag, *val;
	int tag_len, val_len;

	slurm_init_update_node_msg(&node_msg);
	for (i=0; i<argc; i++) {
		tag = argv[i];
		val = strchr(argv[i], '=');
		if (val) {
			tag_len = val - argv[i];
			val++;
			val_len = strlen(val);
		} else {
			exit_code = 1;
			error("Invalid input: %s  Request aborted", argv[i]);
			return -1;
		}

		if (strncasecmp(tag, "NodeAddr", MAX(tag_len, 5)) == 0) {
			node_msg.node_addr = val;
			update_cnt++;
		} else if (strncasecmp(tag, "NodeHostName", MAX(tag_len, 5))
			   == 0) {
			node_msg.node_hostname = val;
			update_cnt++;
		} else if (strncasecmp(tag, "NodeName", MAX(tag_len, 1)) == 0) {
			node_msg.node_names = val;
		} else if (strncasecmp(tag, "Features", MAX(tag_len, 1)) == 0) {
			node_msg.features = val;
			update_cnt++;
		} else if (strncasecmp(tag, "Gres", MAX(tag_len, 1)) == 0) {
			node_msg.gres = val;
			update_cnt++;
		} else if (strncasecmp(tag, "Weight", MAX(tag_len,1)) == 0) {
			/* Logic borrowed from function _handle_uint32 */
			char *endptr;
			unsigned long num;
			errno = 0;
			num = strtoul(val, &endptr, 0);
			if ((endptr[0] == 'k') || (endptr[0] == 'K')) {
				num *= 1024;
				endptr++;
			}
			if ((num == 0 && errno == EINVAL)
        		            || (*endptr != '\0')) {
				if ((strcasecmp(val, "UNLIMITED") == 0) ||
				    (strcasecmp(val, "INFINITE")  == 0)) {
					num = (uint32_t) INFINITE;
				} else {
					error("Weight value (%s) is not a "
					      "valid number", val);
					break;
				}
			} else if (errno == ERANGE) {
				error("Weight value (%s) is out of range",
				      val);
				break;
			} else if (val[0] == '-') {
				error("Weight value (%s) is less than zero",
				      val);
				break;
			} else if (num > 0xfffffff0) {
				error("Weight value (%s) is greater than %u",
					val, 0xfffffff0);
				break;
			}
			node_msg.weight = num;
			update_cnt++;
		} else if (strncasecmp(tag, "Reason", MAX(tag_len, 1)) == 0) {
			int len = strlen(val);
			reason_str = xmalloc(len+1);
			if (*val == '"')
				strcpy(reason_str, val+1);
			else
				strcpy(reason_str, val);

			len = strlen(reason_str) - 1;
			if ((len >= 0) && (reason_str[len] == '"'))
				reason_str[len] = '\0';

			node_msg.reason = reason_str;
			if ((getlogin() == NULL) ||
			    (uid_from_string(getlogin(),
					     &node_msg.reason_uid) < 0)) {
				node_msg.reason_uid = getuid();
			}
			update_cnt++;
		}
		else if (strncasecmp(tag, "State", MAX(tag_len, 1)) == 0) {
			if (cluster_flags & CLUSTER_FLAG_CRAYXT) {
				fprintf (stderr, "%s can not be changed through"
					 " SLURM. Use native Cray tools such as"
					 " xtprocadmin(8)\n", argv[i]);
				fprintf (stderr, "Request aborted\n");
				exit_code = 1;
				goto done;
			}
			if (strncasecmp(val, "NoResp",
				        MAX(val_len, 3)) == 0) {
				node_msg.node_state = NODE_STATE_NO_RESPOND;
				update_cnt++;
			} else if (strncasecmp(val, "DRAIN",
				   MAX(val_len, 3)) == 0) {
				node_msg.node_state = NODE_STATE_DRAIN;
				update_cnt++;
			} else if (strncasecmp(val, "FAIL",
				   MAX(val_len, 3)) == 0) {
				node_msg.node_state = NODE_STATE_FAIL;
				update_cnt++;
			} else if (strncasecmp(val, "FUTURE",
				   MAX(val_len, 3)) == 0) {
				node_msg.node_state = NODE_STATE_FUTURE;
				update_cnt++;
			} else if (strncasecmp(val, "RESUME",
				   MAX(val_len, 3)) == 0) {
				node_msg.node_state = NODE_RESUME;
				update_cnt++;
			} else if (strncasecmp(val, "POWER_DOWN",
				   MAX(val_len, 7)) == 0) {
				node_msg.node_state = NODE_STATE_POWER_SAVE;
				update_cnt++;
			} else if (strncasecmp(val, "POWER_UP",
				   MAX(val_len, 7)) == 0) {
				node_msg.node_state = NODE_STATE_POWER_UP;
				update_cnt++;
			} else {
				state_val = (uint16_t) NO_VAL;
				for (j = 0; j < NODE_STATE_END; j++) {
					if (strncasecmp (node_state_string(j),
							 val,
							 MAX(val_len, 3)) == 0){
						state_val = (uint16_t) j;
						break;
					}
				}
				if (j == NODE_STATE_END) {
					exit_code = 1;
					fprintf(stderr, "Invalid input: %s\n",
						argv[i]);
					fprintf (stderr, "Request aborted\n");
					fprintf (stderr, "Valid states are: ");
					fprintf (stderr,
						 "NoResp DRAIN FAIL RESUME "
						 "POWER_DOWN POWER_UP ");
					for (k = 0; k < NODE_STATE_END; k++) {
						fprintf (stderr, "%s ",
						         node_state_string(k));
					}
					fprintf (stderr, "\n");
					fprintf (stderr,
						 "Not all states are valid "
						 "given a node's prior "
						 "state\n");
					goto done;
				}
				node_msg.node_state = state_val;
				update_cnt++;
			}
		} else {
			exit_code = 1;
			fprintf (stderr, "Update of this parameter is not "
				 "supported: %s\n", argv[i]);
			fprintf (stderr, "Request aborted\n");
			goto done;
		}
	}

	if (((node_msg.node_state == NODE_STATE_DRAIN) ||
	     (node_msg.node_state == NODE_STATE_FAIL)) &&
	    ((node_msg.reason == NULL) || (strlen(node_msg.reason) == 0))) {
		fprintf (stderr, "You must specify a reason when DRAINING a "
			"node\nRequest aborted\n");
		goto done;
	}

	if (update_cnt == 0) {
		exit_code = 1;
		fprintf (stderr, "No changes specified\n");
		return 0;
	}

	rc = slurm_update_node(&node_msg);

done:	xfree(reason_str);
	if (rc) {
		exit_code = 1;
		return slurm_get_errno ();
	} else
		return 0;
}

/*
 * scontrol_update_front_end - update the slurm front_end node configuration
 *	per the supplied arguments
 * IN argc - count of arguments
 * IN argv - list of arguments
 * RET 0 if no slurm error, errno otherwise. parsing error prints
 *			error message and returns 0
 */
extern int
scontrol_update_front_end (int argc, char *argv[])
{
	int i, rc = 0, update_cnt = 0;
	update_front_end_msg_t front_end_msg;
	char *reason_str = NULL;
	char *tag, *val;
	int tag_len, val_len;

	slurm_init_update_front_end_msg(&front_end_msg);
	for (i=0; i<argc; i++) {
		tag = argv[i];
		val = strchr(argv[i], '=');
		if (val) {
			tag_len = val - argv[i];
			val++;
			val_len = strlen(val);
		} else {
			exit_code = 1;
			error("Invalid input: %s  Request aborted", argv[i]);
			return -1;
		}
		if (strncasecmp(tag, "FrontendName", MAX(tag_len, 1)) == 0)
			front_end_msg.name = val;
		else if (strncasecmp(tag, "Reason", MAX(tag_len, 1)) == 0) {
			int len = strlen(val);
			reason_str = xmalloc(len+1);
			if (*val == '"')
				strcpy(reason_str, val+1);
			else
				strcpy(reason_str, val);

			len = strlen(reason_str) - 1;
			if ((len >= 0) && (reason_str[len] == '"'))
				reason_str[len] = '\0';

			front_end_msg.reason = reason_str;
			if ((getlogin() == NULL) ||
			    (uid_from_string(getlogin(),
					     &front_end_msg.reason_uid) < 0)) {
				front_end_msg.reason_uid = getuid();
			}
			update_cnt++;
		}
		else if (strncasecmp(tag, "State", MAX(tag_len, 1)) == 0) {
			if (strncasecmp(val, "DRAIN",
				   MAX(val_len, 3)) == 0) {
				front_end_msg.node_state = NODE_STATE_DRAIN;
				update_cnt++;
			} else if (strncasecmp(val, "DOWN",
				   MAX(val_len, 3)) == 0) {
				front_end_msg.node_state = NODE_STATE_DOWN;
				update_cnt++;
			} else if (strncasecmp(val, "RESUME",
				   MAX(val_len, 3)) == 0) {
				front_end_msg.node_state = NODE_RESUME;
				update_cnt++;
			} else {
				exit_code = 1;
				fprintf(stderr,
					 "Invalid input: %s\n"
					 "Request aborted\n"
					 "Valid states are: DRAIN RESUME\n",
					 argv[i]);
				goto done;
			}
		} else {
			exit_code = 1;
			fprintf(stderr, "Update of this parameter is not "
				"supported: %s\n", argv[i]);
			fprintf(stderr, "Request aborted\n");
			goto done;
		}
	}

	if ((front_end_msg.node_state == NODE_STATE_DOWN) &&
	    ((front_end_msg.reason == NULL) ||
	     (strlen(front_end_msg.reason) == 0))) {
		fprintf (stderr, "You must specify a reason when DOWNING a "
			"frontend node\nRequest aborted\n");
		goto done;
	}
	if ((front_end_msg.node_state == NODE_STATE_DRAIN) &&
	    ((front_end_msg.reason == NULL) ||
	     (strlen(front_end_msg.reason) == 0))) {
		fprintf (stderr, "You must specify a reason when DRAINING a "
			"frontend node\nRequest aborted\n");
		goto done;
	}

	if (update_cnt == 0) {
		exit_code = 1;
		fprintf(stderr, "No changes specified\n");
		return 0;
	}

	rc = slurm_update_front_end(&front_end_msg);

done:	xfree(reason_str);
	if (rc) {
		exit_code = 1;
		return slurm_get_errno ();
	} else
		return 0;
}