| # generated automatically by aclocal 1.11.6 -*- Autoconf -*- |
| |
| # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, |
| # 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, |
| # Inc. |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| m4_ifndef([AC_AUTOCONF_VERSION], |
| [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl |
| m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, |
| [m4_warning([this file was generated for autoconf 2.69. |
| You have another version of autoconf. It may work, but is not guaranteed to. |
| If you have problems, you may need to regenerate the build system entirely. |
| To do so, use the procedure documented by the package, typically `autoreconf'.])]) |
| |
| # Configure paths for GLIB |
| # Owen Taylor 1997-2001 |
| |
| dnl AM_PATH_GLIB_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) |
| dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if gmodule, gobject, |
| dnl gthread, or gio is specified in MODULES, pass to pkg-config |
| dnl |
| AC_DEFUN([AM_PATH_GLIB_2_0], |
| [dnl |
| dnl Get the cflags and libraries from pkg-config |
| dnl |
| AC_ARG_ENABLE(glibtest, [ --disable-glibtest do not try to compile and run a test GLIB program], |
| , enable_glibtest=yes) |
| |
| pkg_config_args=glib-2.0 |
| for module in . $4 |
| do |
| case "$module" in |
| gmodule) |
| pkg_config_args="$pkg_config_args gmodule-2.0" |
| ;; |
| gmodule-no-export) |
| pkg_config_args="$pkg_config_args gmodule-no-export-2.0" |
| ;; |
| gobject) |
| pkg_config_args="$pkg_config_args gobject-2.0" |
| ;; |
| gthread) |
| pkg_config_args="$pkg_config_args gthread-2.0" |
| ;; |
| gio*) |
| pkg_config_args="$pkg_config_args $module-2.0" |
| ;; |
| esac |
| done |
| |
| PKG_PROG_PKG_CONFIG([0.16]) |
| |
| no_glib="" |
| |
| if test "x$PKG_CONFIG" = x ; then |
| no_glib=yes |
| PKG_CONFIG=no |
| fi |
| |
| min_glib_version=ifelse([$1], ,2.0.0,$1) |
| AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) |
| |
| if test x$PKG_CONFIG != xno ; then |
| ## don't try to run the test against uninstalled libtool libs |
| if $PKG_CONFIG --uninstalled $pkg_config_args; then |
| echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH" |
| enable_glibtest=no |
| fi |
| |
| if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then |
| : |
| else |
| no_glib=yes |
| fi |
| fi |
| |
| if test x"$no_glib" = x ; then |
| GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0` |
| GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0` |
| GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0` |
| GLIB_COMPILE_RESOURCES=`$PKG_CONFIG --variable=glib_compile_resources gio-2.0` |
| |
| GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args` |
| GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args` |
| glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` |
| glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` |
| glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` |
| if test "x$enable_glibtest" = "xyes" ; then |
| ac_save_CFLAGS="$CFLAGS" |
| ac_save_LIBS="$LIBS" |
| CFLAGS="$CFLAGS $GLIB_CFLAGS" |
| LIBS="$GLIB_LIBS $LIBS" |
| dnl |
| dnl Now check if the installed GLIB is sufficiently new. (Also sanity |
| dnl checks the results of pkg-config to some extent) |
| dnl |
| rm -f conf.glibtest |
| AC_TRY_RUN([ |
| #include <glib.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| |
| int |
| main () |
| { |
| unsigned int major, minor, micro; |
| char *tmp_version; |
| |
| fclose (fopen ("conf.glibtest", "w")); |
| |
| /* HP/UX 9 (%@#!) writes to sscanf strings */ |
| tmp_version = g_strdup("$min_glib_version"); |
| if (sscanf(tmp_version, "%u.%u.%u", &major, &minor, µ) != 3) { |
| printf("%s, bad version string\n", "$min_glib_version"); |
| exit(1); |
| } |
| |
| if ((glib_major_version != $glib_config_major_version) || |
| (glib_minor_version != $glib_config_minor_version) || |
| (glib_micro_version != $glib_config_micro_version)) |
| { |
| printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", |
| $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, |
| glib_major_version, glib_minor_version, glib_micro_version); |
| printf ("*** was found! If pkg-config was correct, then it is best\n"); |
| printf ("*** to remove the old version of GLib. You may also be able to fix the error\n"); |
| printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); |
| printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); |
| printf("*** required on your system.\n"); |
| printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); |
| printf("*** to point to the correct configuration files\n"); |
| } |
| else if ((glib_major_version != GLIB_MAJOR_VERSION) || |
| (glib_minor_version != GLIB_MINOR_VERSION) || |
| (glib_micro_version != GLIB_MICRO_VERSION)) |
| { |
| printf("*** GLIB header files (version %d.%d.%d) do not match\n", |
| GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); |
| printf("*** library (version %d.%d.%d)\n", |
| glib_major_version, glib_minor_version, glib_micro_version); |
| } |
| else |
| { |
| if ((glib_major_version > major) || |
| ((glib_major_version == major) && (glib_minor_version > minor)) || |
| ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) |
| { |
| return 0; |
| } |
| else |
| { |
| printf("\n*** An old version of GLIB (%u.%u.%u) was found.\n", |
| glib_major_version, glib_minor_version, glib_micro_version); |
| printf("*** You need a version of GLIB newer than %u.%u.%u. The latest version of\n", |
| major, minor, micro); |
| printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); |
| printf("***\n"); |
| printf("*** If you have already installed a sufficiently new version, this error\n"); |
| printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); |
| printf("*** being found. The easiest way to fix this is to remove the old version\n"); |
| printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n"); |
| printf("*** correct copy of pkg-config. (In this case, you will have to\n"); |
| printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); |
| printf("*** so that the correct libraries are found at run-time))\n"); |
| } |
| } |
| return 1; |
| } |
| ],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) |
| CFLAGS="$ac_save_CFLAGS" |
| LIBS="$ac_save_LIBS" |
| fi |
| fi |
| if test "x$no_glib" = x ; then |
| AC_MSG_RESULT(yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)) |
| ifelse([$2], , :, [$2]) |
| else |
| AC_MSG_RESULT(no) |
| if test "$PKG_CONFIG" = "no" ; then |
| echo "*** A new enough version of pkg-config was not found." |
| echo "*** See http://www.freedesktop.org/software/pkgconfig/" |
| else |
| if test -f conf.glibtest ; then |
| : |
| else |
| echo "*** Could not run GLIB test program, checking why..." |
| ac_save_CFLAGS="$CFLAGS" |
| ac_save_LIBS="$LIBS" |
| CFLAGS="$CFLAGS $GLIB_CFLAGS" |
| LIBS="$LIBS $GLIB_LIBS" |
| AC_TRY_LINK([ |
| #include <glib.h> |
| #include <stdio.h> |
| ], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], |
| [ echo "*** The test program compiled, but did not run. This usually means" |
| echo "*** that the run-time linker is not finding GLIB or finding the wrong" |
| echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" |
| echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" |
| echo "*** to the installed location Also, make sure you have run ldconfig if that" |
| echo "*** is required on your system" |
| echo "***" |
| echo "*** If you have an old version installed, it is best to remove it, although" |
| echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], |
| [ echo "*** The test program failed to compile or link. See the file config.log for the" |
| echo "*** exact error that occured. This usually means GLIB is incorrectly installed."]) |
| CFLAGS="$ac_save_CFLAGS" |
| LIBS="$ac_save_LIBS" |
| fi |
| fi |
| GLIB_CFLAGS="" |
| GLIB_LIBS="" |
| GLIB_GENMARSHAL="" |
| GOBJECT_QUERY="" |
| GLIB_MKENUMS="" |
| GLIB_COMPILE_RESOURCES="" |
| ifelse([$3], , :, [$3]) |
| fi |
| AC_SUBST(GLIB_CFLAGS) |
| AC_SUBST(GLIB_LIBS) |
| AC_SUBST(GLIB_GENMARSHAL) |
| AC_SUBST(GOBJECT_QUERY) |
| AC_SUBST(GLIB_MKENUMS) |
| AC_SUBST(GLIB_COMPILE_RESOURCES) |
| rm -f conf.glibtest |
| ]) |
| |
| # Configure paths for GTK+ |
| # Owen Taylor 1997-2001 |
| |
| dnl AM_PATH_GTK_2_0([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) |
| dnl Test for GTK+, and define GTK_CFLAGS and GTK_LIBS, if gthread is specified in MODULES, |
| dnl pass to pkg-config |
| dnl |
| AC_DEFUN([AM_PATH_GTK_2_0], |
| [dnl |
| dnl Get the cflags and libraries from pkg-config |
| dnl |
| AC_ARG_ENABLE(gtktest, [ --disable-gtktest do not try to compile and run a test GTK+ program], |
| , enable_gtktest=yes) |
| |
| pkg_config_args=gtk+-2.0 |
| for module in . $4 |
| do |
| case "$module" in |
| gthread) |
| pkg_config_args="$pkg_config_args gthread-2.0" |
| ;; |
| esac |
| done |
| |
| no_gtk="" |
| |
| AC_PATH_PROG(PKG_CONFIG, pkg-config, no) |
| |
| if test x$PKG_CONFIG != xno ; then |
| if pkg-config --atleast-pkgconfig-version 0.7 ; then |
| : |
| else |
| echo "*** pkg-config too old; version 0.7 or better required." |
| no_gtk=yes |
| PKG_CONFIG=no |
| fi |
| else |
| no_gtk=yes |
| fi |
| |
| min_gtk_version=ifelse([$1], ,2.0.0,$1) |
| AC_MSG_CHECKING(for GTK+ - version >= $min_gtk_version) |
| |
| if test x$PKG_CONFIG != xno ; then |
| ## don't try to run the test against uninstalled libtool libs |
| if $PKG_CONFIG --uninstalled $pkg_config_args; then |
| echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH" |
| enable_gtktest=no |
| fi |
| |
| if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then |
| : |
| else |
| no_gtk=yes |
| fi |
| fi |
| |
| if test x"$no_gtk" = x ; then |
| GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags` |
| GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs` |
| gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` |
| gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` |
| gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \ |
| sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` |
| if test "x$enable_gtktest" = "xyes" ; then |
| ac_save_CFLAGS="$CFLAGS" |
| ac_save_LIBS="$LIBS" |
| CFLAGS="$CFLAGS $GTK_CFLAGS" |
| LIBS="$GTK_LIBS $LIBS" |
| dnl |
| dnl Now check if the installed GTK+ is sufficiently new. (Also sanity |
| dnl checks the results of pkg-config to some extent) |
| dnl |
| rm -f conf.gtktest |
| AC_TRY_RUN([ |
| #include <gtk/gtk.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| |
| int |
| main () |
| { |
| int major, minor, micro; |
| char *tmp_version; |
| |
| fclose (fopen ("conf.gtktest", "w")); |
| |
| /* HP/UX 9 (%@#!) writes to sscanf strings */ |
| tmp_version = g_strdup("$min_gtk_version"); |
| if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { |
| printf("%s, bad version string\n", "$min_gtk_version"); |
| exit(1); |
| } |
| |
| if ((gtk_major_version != $gtk_config_major_version) || |
| (gtk_minor_version != $gtk_config_minor_version) || |
| (gtk_micro_version != $gtk_config_micro_version)) |
| { |
| printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", |
| $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, |
| gtk_major_version, gtk_minor_version, gtk_micro_version); |
| printf ("*** was found! If pkg-config was correct, then it is best\n"); |
| printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); |
| printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); |
| printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); |
| printf("*** required on your system.\n"); |
| printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n"); |
| printf("*** to point to the correct configuration files\n"); |
| } |
| else if ((gtk_major_version != GTK_MAJOR_VERSION) || |
| (gtk_minor_version != GTK_MINOR_VERSION) || |
| (gtk_micro_version != GTK_MICRO_VERSION)) |
| { |
| printf("*** GTK+ header files (version %d.%d.%d) do not match\n", |
| GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); |
| printf("*** library (version %d.%d.%d)\n", |
| gtk_major_version, gtk_minor_version, gtk_micro_version); |
| } |
| else |
| { |
| if ((gtk_major_version > major) || |
| ((gtk_major_version == major) && (gtk_minor_version > minor)) || |
| ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) |
| { |
| return 0; |
| } |
| else |
| { |
| printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", |
| gtk_major_version, gtk_minor_version, gtk_micro_version); |
| printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", |
| major, minor, micro); |
| printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); |
| printf("***\n"); |
| printf("*** If you have already installed a sufficiently new version, this error\n"); |
| printf("*** probably means that the wrong copy of the pkg-config shell script is\n"); |
| printf("*** being found. The easiest way to fix this is to remove the old version\n"); |
| printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n"); |
| printf("*** correct copy of pkg-config. (In this case, you will have to\n"); |
| printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); |
| printf("*** so that the correct libraries are found at run-time))\n"); |
| } |
| } |
| return 1; |
| } |
| ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) |
| CFLAGS="$ac_save_CFLAGS" |
| LIBS="$ac_save_LIBS" |
| fi |
| fi |
| if test "x$no_gtk" = x ; then |
| AC_MSG_RESULT(yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)) |
| ifelse([$2], , :, [$2]) |
| else |
| AC_MSG_RESULT(no) |
| if test "$PKG_CONFIG" = "no" ; then |
| echo "*** A new enough version of pkg-config was not found." |
| echo "*** See http://pkgconfig.sourceforge.net" |
| else |
| if test -f conf.gtktest ; then |
| : |
| else |
| echo "*** Could not run GTK+ test program, checking why..." |
| ac_save_CFLAGS="$CFLAGS" |
| ac_save_LIBS="$LIBS" |
| CFLAGS="$CFLAGS $GTK_CFLAGS" |
| LIBS="$LIBS $GTK_LIBS" |
| AC_TRY_LINK([ |
| #include <gtk/gtk.h> |
| #include <stdio.h> |
| ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], |
| [ echo "*** The test program compiled, but did not run. This usually means" |
| echo "*** that the run-time linker is not finding GTK+ or finding the wrong" |
| echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your" |
| echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" |
| echo "*** to the installed location Also, make sure you have run ldconfig if that" |
| echo "*** is required on your system" |
| echo "***" |
| echo "*** If you have an old version installed, it is best to remove it, although" |
| echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ], |
| [ echo "*** The test program failed to compile or link. See the file config.log for the" |
| echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."]) |
| CFLAGS="$ac_save_CFLAGS" |
| LIBS="$ac_save_LIBS" |
| fi |
| fi |
| GTK_CFLAGS="" |
| GTK_LIBS="" |
| ifelse([$3], , :, [$3]) |
| fi |
| AC_SUBST(GTK_CFLAGS) |
| AC_SUBST(GTK_LIBS) |
| rm -f conf.gtktest |
| ]) |
| |
| # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- |
| # serial 1 (pkg-config-0.24) |
| # |
| # Copyright © 2004 Scott James Remnant <scott@netsplit.com>. |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, but |
| # WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| # General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| # |
| # As a special exception to the GNU General Public License, if you |
| # distribute this file as part of a program that contains a |
| # configuration script generated by Autoconf, you may include it under |
| # the same distribution terms that you use for the rest of that program. |
| |
| # PKG_PROG_PKG_CONFIG([MIN-VERSION]) |
| # ---------------------------------- |
| AC_DEFUN([PKG_PROG_PKG_CONFIG], |
| [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) |
| m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) |
| m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) |
| AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) |
| AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) |
| AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) |
| |
| if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then |
| AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) |
| fi |
| if test -n "$PKG_CONFIG"; then |
| _pkg_min_version=m4_default([$1], [0.9.0]) |
| AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) |
| if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no]) |
| PKG_CONFIG="" |
| fi |
| fi[]dnl |
| ])# PKG_PROG_PKG_CONFIG |
| |
| # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) |
| # |
| # Check to see whether a particular set of modules exists. Similar |
| # to PKG_CHECK_MODULES(), but does not set variables or print errors. |
| # |
| # Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) |
| # only at the first occurence in configure.ac, so if the first place |
| # it's called might be skipped (such as if it is within an "if", you |
| # have to call PKG_CHECK_EXISTS manually |
| # -------------------------------------------------------------- |
| AC_DEFUN([PKG_CHECK_EXISTS], |
| [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl |
| if test -n "$PKG_CONFIG" && \ |
| AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then |
| m4_default([$2], [:]) |
| m4_ifvaln([$3], [else |
| $3])dnl |
| fi]) |
| |
| # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) |
| # --------------------------------------------- |
| m4_define([_PKG_CONFIG], |
| [if test -n "$$1"; then |
| pkg_cv_[]$1="$$1" |
| elif test -n "$PKG_CONFIG"; then |
| PKG_CHECK_EXISTS([$3], |
| [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` |
| test "x$?" != "x0" && pkg_failed=yes ], |
| [pkg_failed=yes]) |
| else |
| pkg_failed=untried |
| fi[]dnl |
| ])# _PKG_CONFIG |
| |
| # _PKG_SHORT_ERRORS_SUPPORTED |
| # ----------------------------- |
| AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], |
| [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) |
| if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then |
| _pkg_short_errors_supported=yes |
| else |
| _pkg_short_errors_supported=no |
| fi[]dnl |
| ])# _PKG_SHORT_ERRORS_SUPPORTED |
| |
| |
| # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], |
| # [ACTION-IF-NOT-FOUND]) |
| # |
| # |
| # Note that if there is a possibility the first call to |
| # PKG_CHECK_MODULES might not happen, you should be sure to include an |
| # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac |
| # |
| # |
| # -------------------------------------------------------------- |
| AC_DEFUN([PKG_CHECK_MODULES], |
| [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl |
| AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl |
| AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl |
| |
| pkg_failed=no |
| AC_MSG_CHECKING([for $1]) |
| |
| _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) |
| _PKG_CONFIG([$1][_LIBS], [libs], [$2]) |
| |
| m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS |
| and $1[]_LIBS to avoid the need to call pkg-config. |
| See the pkg-config man page for more details.]) |
| |
| if test $pkg_failed = yes; then |
| AC_MSG_RESULT([no]) |
| _PKG_SHORT_ERRORS_SUPPORTED |
| if test $_pkg_short_errors_supported = yes; then |
| $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` |
| else |
| $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` |
| fi |
| # Put the nasty error message in config.log where it belongs |
| echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD |
| |
| m4_default([$4], [AC_MSG_ERROR( |
| [Package requirements ($2) were not met: |
| |
| $$1_PKG_ERRORS |
| |
| Consider adjusting the PKG_CONFIG_PATH environment variable if you |
| installed software in a non-standard prefix. |
| |
| _PKG_TEXT])[]dnl |
| ]) |
| elif test $pkg_failed = untried; then |
| AC_MSG_RESULT([no]) |
| m4_default([$4], [AC_MSG_FAILURE( |
| [The pkg-config script could not be found or is too old. Make sure it |
| is in your PATH or set the PKG_CONFIG environment variable to the full |
| path to pkg-config. |
| |
| _PKG_TEXT |
| |
| To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl |
| ]) |
| else |
| $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS |
| $1[]_LIBS=$pkg_cv_[]$1[]_LIBS |
| AC_MSG_RESULT([yes]) |
| $3 |
| fi[]dnl |
| ])# PKG_CHECK_MODULES |
| |
| # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software |
| # Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 1 |
| |
| # AM_AUTOMAKE_VERSION(VERSION) |
| # ---------------------------- |
| # Automake X.Y traces this macro to ensure aclocal.m4 has been |
| # generated from the m4 files accompanying Automake X.Y. |
| # (This private macro should not be called outside this file.) |
| AC_DEFUN([AM_AUTOMAKE_VERSION], |
| [am__api_version='1.11' |
| dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to |
| dnl require some minimum version. Point them to the right macro. |
| m4_if([$1], [1.11.6], [], |
| [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl |
| ]) |
| |
| # _AM_AUTOCONF_VERSION(VERSION) |
| # ----------------------------- |
| # aclocal traces this macro to find the Autoconf version. |
| # This is a private macro too. Using m4_define simplifies |
| # the logic in aclocal, which can simply ignore this definition. |
| m4_define([_AM_AUTOCONF_VERSION], []) |
| |
| # AM_SET_CURRENT_AUTOMAKE_VERSION |
| # ------------------------------- |
| # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. |
| # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. |
| AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], |
| [AM_AUTOMAKE_VERSION([1.11.6])dnl |
| m4_ifndef([AC_AUTOCONF_VERSION], |
| [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl |
| _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) |
| |
| # AM_AUX_DIR_EXPAND -*- Autoconf -*- |
| |
| # Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 1 |
| |
| # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets |
| # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to |
| # `$srcdir', `$srcdir/..', or `$srcdir/../..'. |
| # |
| # Of course, Automake must honor this variable whenever it calls a |
| # tool from the auxiliary directory. The problem is that $srcdir (and |
| # therefore $ac_aux_dir as well) can be either absolute or relative, |
| # depending on how configure is run. This is pretty annoying, since |
| # it makes $ac_aux_dir quite unusable in subdirectories: in the top |
| # source directory, any form will work fine, but in subdirectories a |
| # relative path needs to be adjusted first. |
| # |
| # $ac_aux_dir/missing |
| # fails when called from a subdirectory if $ac_aux_dir is relative |
| # $top_srcdir/$ac_aux_dir/missing |
| # fails if $ac_aux_dir is absolute, |
| # fails when called from a subdirectory in a VPATH build with |
| # a relative $ac_aux_dir |
| # |
| # The reason of the latter failure is that $top_srcdir and $ac_aux_dir |
| # are both prefixed by $srcdir. In an in-source build this is usually |
| # harmless because $srcdir is `.', but things will broke when you |
| # start a VPATH build or use an absolute $srcdir. |
| # |
| # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, |
| # iff we strip the leading $srcdir from $ac_aux_dir. That would be: |
| # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` |
| # and then we would define $MISSING as |
| # MISSING="\${SHELL} $am_aux_dir/missing" |
| # This will work as long as MISSING is not called from configure, because |
| # unfortunately $(top_srcdir) has no meaning in configure. |
| # However there are other variables, like CC, which are often used in |
| # configure, and could therefore not use this "fixed" $ac_aux_dir. |
| # |
| # Another solution, used here, is to always expand $ac_aux_dir to an |
| # absolute PATH. The drawback is that using absolute paths prevent a |
| # configured tree to be moved without reconfiguration. |
| |
| AC_DEFUN([AM_AUX_DIR_EXPAND], |
| [dnl Rely on autoconf to set up CDPATH properly. |
| AC_PREREQ([2.50])dnl |
| # expand $ac_aux_dir to an absolute path |
| am_aux_dir=`cd $ac_aux_dir && pwd` |
| ]) |
| |
| # AM_CONDITIONAL -*- Autoconf -*- |
| |
| # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 |
| # Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 9 |
| |
| # AM_CONDITIONAL(NAME, SHELL-CONDITION) |
| # ------------------------------------- |
| # Define a conditional. |
| AC_DEFUN([AM_CONDITIONAL], |
| [AC_PREREQ(2.52)dnl |
| ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], |
| [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl |
| AC_SUBST([$1_TRUE])dnl |
| AC_SUBST([$1_FALSE])dnl |
| _AM_SUBST_NOTMAKE([$1_TRUE])dnl |
| _AM_SUBST_NOTMAKE([$1_FALSE])dnl |
| m4_define([_AM_COND_VALUE_$1], [$2])dnl |
| if $2; then |
| $1_TRUE= |
| $1_FALSE='#' |
| else |
| $1_TRUE='#' |
| $1_FALSE= |
| fi |
| AC_CONFIG_COMMANDS_PRE( |
| [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then |
| AC_MSG_ERROR([[conditional "$1" was never defined. |
| Usually this means the macro was only invoked conditionally.]]) |
| fi])]) |
| |
| # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009, |
| # 2010, 2011 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 12 |
| |
| # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be |
| # written in clear, in which case automake, when reading aclocal.m4, |
| # will think it sees a *use*, and therefore will trigger all it's |
| # C support machinery. Also note that it means that autoscan, seeing |
| # CC etc. in the Makefile, will ask for an AC_PROG_CC use... |
| |
| |
| # _AM_DEPENDENCIES(NAME) |
| # ---------------------- |
| # See how the compiler implements dependency checking. |
| # NAME is "CC", "CXX", "GCJ", or "OBJC". |
| # We try a few techniques and use that to set a single cache variable. |
| # |
| # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was |
| # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular |
| # dependency, and given that the user is not expected to run this macro, |
| # just rely on AC_PROG_CC. |
| AC_DEFUN([_AM_DEPENDENCIES], |
| [AC_REQUIRE([AM_SET_DEPDIR])dnl |
| AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl |
| AC_REQUIRE([AM_MAKE_INCLUDE])dnl |
| AC_REQUIRE([AM_DEP_TRACK])dnl |
| |
| ifelse([$1], CC, [depcc="$CC" am_compiler_list=], |
| [$1], CXX, [depcc="$CXX" am_compiler_list=], |
| [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], |
| [$1], UPC, [depcc="$UPC" am_compiler_list=], |
| [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], |
| [depcc="$$1" am_compiler_list=]) |
| |
| AC_CACHE_CHECK([dependency style of $depcc], |
| [am_cv_$1_dependencies_compiler_type], |
| [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then |
| # We make a subdir and do the tests there. Otherwise we can end up |
| # making bogus files that we don't know about and never remove. For |
| # instance it was reported that on HP-UX the gcc test will end up |
| # making a dummy file named `D' -- because `-MD' means `put the output |
| # in D'. |
| rm -rf conftest.dir |
| mkdir conftest.dir |
| # Copy depcomp to subdir because otherwise we won't find it if we're |
| # using a relative directory. |
| cp "$am_depcomp" conftest.dir |
| cd conftest.dir |
| # We will build objects and dependencies in a subdirectory because |
| # it helps to detect inapplicable dependency modes. For instance |
| # both Tru64's cc and ICC support -MD to output dependencies as a |
| # side effect of compilation, but ICC will put the dependencies in |
| # the current directory while Tru64 will put them in the object |
| # directory. |
| mkdir sub |
| |
| am_cv_$1_dependencies_compiler_type=none |
| if test "$am_compiler_list" = ""; then |
| am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` |
| fi |
| am__universal=false |
| m4_case([$1], [CC], |
| [case " $depcc " in #( |
| *\ -arch\ *\ -arch\ *) am__universal=true ;; |
| esac], |
| [CXX], |
| [case " $depcc " in #( |
| *\ -arch\ *\ -arch\ *) am__universal=true ;; |
| esac]) |
| |
| for depmode in $am_compiler_list; do |
| # Setup a source with many dependencies, because some compilers |
| # like to wrap large dependency lists on column 80 (with \), and |
| # we should not choose a depcomp mode which is confused by this. |
| # |
| # We need to recreate these files for each test, as the compiler may |
| # overwrite some of them when testing with obscure command lines. |
| # This happens at least with the AIX C compiler. |
| : > sub/conftest.c |
| for i in 1 2 3 4 5 6; do |
| echo '#include "conftst'$i'.h"' >> sub/conftest.c |
| # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with |
| # Solaris 8's {/usr,}/bin/sh. |
| touch sub/conftst$i.h |
| done |
| echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf |
| |
| # We check with `-c' and `-o' for the sake of the "dashmstdout" |
| # mode. It turns out that the SunPro C++ compiler does not properly |
| # handle `-M -o', and we need to detect this. Also, some Intel |
| # versions had trouble with output in subdirs |
| am__obj=sub/conftest.${OBJEXT-o} |
| am__minus_obj="-o $am__obj" |
| case $depmode in |
| gcc) |
| # This depmode causes a compiler race in universal mode. |
| test "$am__universal" = false || continue |
| ;; |
| nosideeffect) |
| # after this tag, mechanisms are not by side-effect, so they'll |
| # only be used when explicitly requested |
| if test "x$enable_dependency_tracking" = xyes; then |
| continue |
| else |
| break |
| fi |
| ;; |
| msvc7 | msvc7msys | msvisualcpp | msvcmsys) |
| # This compiler won't grok `-c -o', but also, the minuso test has |
| # not run yet. These depmodes are late enough in the game, and |
| # so weak that their functioning should not be impacted. |
| am__obj=conftest.${OBJEXT-o} |
| am__minus_obj= |
| ;; |
| none) break ;; |
| esac |
| if depmode=$depmode \ |
| source=sub/conftest.c object=$am__obj \ |
| depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ |
| $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ |
| >/dev/null 2>conftest.err && |
| grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && |
| grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && |
| grep $am__obj sub/conftest.Po > /dev/null 2>&1 && |
| ${MAKE-make} -s -f confmf > /dev/null 2>&1; then |
| # icc doesn't choke on unknown options, it will just issue warnings |
| # or remarks (even with -Werror). So we grep stderr for any message |
| # that says an option was ignored or not supported. |
| # When given -MP, icc 7.0 and 7.1 complain thusly: |
| # icc: Command line warning: ignoring option '-M'; no argument required |
| # The diagnosis changed in icc 8.0: |
| # icc: Command line remark: option '-MP' not supported |
| if (grep 'ignoring option' conftest.err || |
| grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else |
| am_cv_$1_dependencies_compiler_type=$depmode |
| break |
| fi |
| fi |
| done |
| |
| cd .. |
| rm -rf conftest.dir |
| else |
| am_cv_$1_dependencies_compiler_type=none |
| fi |
| ]) |
| AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) |
| AM_CONDITIONAL([am__fastdep$1], [ |
| test "x$enable_dependency_tracking" != xno \ |
| && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) |
| ]) |
| |
| |
| # AM_SET_DEPDIR |
| # ------------- |
| # Choose a directory name for dependency files. |
| # This macro is AC_REQUIREd in _AM_DEPENDENCIES |
| AC_DEFUN([AM_SET_DEPDIR], |
| [AC_REQUIRE([AM_SET_LEADING_DOT])dnl |
| AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl |
| ]) |
| |
| |
| # AM_DEP_TRACK |
| # ------------ |
| AC_DEFUN([AM_DEP_TRACK], |
| [AC_ARG_ENABLE(dependency-tracking, |
| [ --disable-dependency-tracking speeds up one-time build |
| --enable-dependency-tracking do not reject slow dependency extractors]) |
| if test "x$enable_dependency_tracking" != xno; then |
| am_depcomp="$ac_aux_dir/depcomp" |
| AMDEPBACKSLASH='\' |
| am__nodep='_no' |
| fi |
| AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) |
| AC_SUBST([AMDEPBACKSLASH])dnl |
| _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl |
| AC_SUBST([am__nodep])dnl |
| _AM_SUBST_NOTMAKE([am__nodep])dnl |
| ]) |
| |
| # Generate code to set up dependency tracking. -*- Autoconf -*- |
| |
| # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 |
| # Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| #serial 5 |
| |
| # _AM_OUTPUT_DEPENDENCY_COMMANDS |
| # ------------------------------ |
| AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], |
| [{ |
| # Autoconf 2.62 quotes --file arguments for eval, but not when files |
| # are listed without --file. Let's play safe and only enable the eval |
| # if we detect the quoting. |
| case $CONFIG_FILES in |
| *\'*) eval set x "$CONFIG_FILES" ;; |
| *) set x $CONFIG_FILES ;; |
| esac |
| shift |
| for mf |
| do |
| # Strip MF so we end up with the name of the file. |
| mf=`echo "$mf" | sed -e 's/:.*$//'` |
| # Check whether this is an Automake generated Makefile or not. |
| # We used to match only the files named `Makefile.in', but |
| # some people rename them; so instead we look at the file content. |
| # Grep'ing the first line is not enough: some people post-process |
| # each Makefile.in and add a new line on top of each file to say so. |
| # Grep'ing the whole file is not good either: AIX grep has a line |
| # limit of 2048, but all sed's we know have understand at least 4000. |
| if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then |
| dirpart=`AS_DIRNAME("$mf")` |
| else |
| continue |
| fi |
| # Extract the definition of DEPDIR, am__include, and am__quote |
| # from the Makefile without running `make'. |
| DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` |
| test -z "$DEPDIR" && continue |
| am__include=`sed -n 's/^am__include = //p' < "$mf"` |
| test -z "am__include" && continue |
| am__quote=`sed -n 's/^am__quote = //p' < "$mf"` |
| # When using ansi2knr, U may be empty or an underscore; expand it |
| U=`sed -n 's/^U = //p' < "$mf"` |
| # Find all dependency output files, they are included files with |
| # $(DEPDIR) in their names. We invoke sed twice because it is the |
| # simplest approach to changing $(DEPDIR) to its actual value in the |
| # expansion. |
| for file in `sed -n " |
| s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ |
| sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do |
| # Make sure the directory exists. |
| test -f "$dirpart/$file" && continue |
| fdir=`AS_DIRNAME(["$file"])` |
| AS_MKDIR_P([$dirpart/$fdir]) |
| # echo "creating $dirpart/$file" |
| echo '# dummy' > "$dirpart/$file" |
| done |
| done |
| } |
| ])# _AM_OUTPUT_DEPENDENCY_COMMANDS |
| |
| |
| # AM_OUTPUT_DEPENDENCY_COMMANDS |
| # ----------------------------- |
| # This macro should only be invoked once -- use via AC_REQUIRE. |
| # |
| # This code is only required when automatic dependency tracking |
| # is enabled. FIXME. This creates each `.P' file that we will |
| # need in order to bootstrap the dependency handling code. |
| AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], |
| [AC_CONFIG_COMMANDS([depfiles], |
| [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], |
| [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) |
| ]) |
| |
| # Do all the work for Automake. -*- Autoconf -*- |
| |
| # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, |
| # 2005, 2006, 2008, 2009 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 16 |
| |
| # This macro actually does too much. Some checks are only needed if |
| # your package does certain things. But this isn't really a big deal. |
| |
| # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) |
| # AM_INIT_AUTOMAKE([OPTIONS]) |
| # ----------------------------------------------- |
| # The call with PACKAGE and VERSION arguments is the old style |
| # call (pre autoconf-2.50), which is being phased out. PACKAGE |
| # and VERSION should now be passed to AC_INIT and removed from |
| # the call to AM_INIT_AUTOMAKE. |
| # We support both call styles for the transition. After |
| # the next Automake release, Autoconf can make the AC_INIT |
| # arguments mandatory, and then we can depend on a new Autoconf |
| # release and drop the old call support. |
| AC_DEFUN([AM_INIT_AUTOMAKE], |
| [AC_PREREQ([2.62])dnl |
| dnl Autoconf wants to disallow AM_ names. We explicitly allow |
| dnl the ones we care about. |
| m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl |
| AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl |
| AC_REQUIRE([AC_PROG_INSTALL])dnl |
| if test "`cd $srcdir && pwd`" != "`pwd`"; then |
| # Use -I$(srcdir) only when $(srcdir) != ., so that make's output |
| # is not polluted with repeated "-I." |
| AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl |
| # test to see if srcdir already configured |
| if test -f $srcdir/config.status; then |
| AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) |
| fi |
| fi |
| |
| # test whether we have cygpath |
| if test -z "$CYGPATH_W"; then |
| if (cygpath --version) >/dev/null 2>/dev/null; then |
| CYGPATH_W='cygpath -w' |
| else |
| CYGPATH_W=echo |
| fi |
| fi |
| AC_SUBST([CYGPATH_W]) |
| |
| # Define the identity of the package. |
| dnl Distinguish between old-style and new-style calls. |
| m4_ifval([$2], |
| [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl |
| AC_SUBST([PACKAGE], [$1])dnl |
| AC_SUBST([VERSION], [$2])], |
| [_AM_SET_OPTIONS([$1])dnl |
| dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. |
| m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, |
| [m4_fatal([AC_INIT should be called with package and version arguments])])dnl |
| AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl |
| AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl |
| |
| _AM_IF_OPTION([no-define],, |
| [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) |
| AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl |
| |
| # Some tools Automake needs. |
| AC_REQUIRE([AM_SANITY_CHECK])dnl |
| AC_REQUIRE([AC_ARG_PROGRAM])dnl |
| AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) |
| AM_MISSING_PROG(AUTOCONF, autoconf) |
| AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) |
| AM_MISSING_PROG(AUTOHEADER, autoheader) |
| AM_MISSING_PROG(MAKEINFO, makeinfo) |
| AC_REQUIRE([AM_PROG_INSTALL_SH])dnl |
| AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl |
| AC_REQUIRE([AM_PROG_MKDIR_P])dnl |
| # We need awk for the "check" target. The system "awk" is bad on |
| # some platforms. |
| AC_REQUIRE([AC_PROG_AWK])dnl |
| AC_REQUIRE([AC_PROG_MAKE_SET])dnl |
| AC_REQUIRE([AM_SET_LEADING_DOT])dnl |
| _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], |
| [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], |
| [_AM_PROG_TAR([v7])])]) |
| _AM_IF_OPTION([no-dependencies],, |
| [AC_PROVIDE_IFELSE([AC_PROG_CC], |
| [_AM_DEPENDENCIES(CC)], |
| [define([AC_PROG_CC], |
| defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl |
| AC_PROVIDE_IFELSE([AC_PROG_CXX], |
| [_AM_DEPENDENCIES(CXX)], |
| [define([AC_PROG_CXX], |
| defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl |
| AC_PROVIDE_IFELSE([AC_PROG_OBJC], |
| [_AM_DEPENDENCIES(OBJC)], |
| [define([AC_PROG_OBJC], |
| defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl |
| ]) |
| _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl |
| dnl The `parallel-tests' driver may need to know about EXEEXT, so add the |
| dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro |
| dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. |
| AC_CONFIG_COMMANDS_PRE(dnl |
| [m4_provide_if([_AM_COMPILER_EXEEXT], |
| [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl |
| ]) |
| |
| dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not |
| dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further |
| dnl mangled by Autoconf and run in a shell conditional statement. |
| m4_define([_AC_COMPILER_EXEEXT], |
| m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) |
| |
| |
| # When config.status generates a header, we must update the stamp-h file. |
| # This file resides in the same directory as the config header |
| # that is generated. The stamp files are numbered to have different names. |
| |
| # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the |
| # loop where config.status creates the headers, so we can generate |
| # our stamp files there. |
| AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], |
| [# Compute $1's index in $config_headers. |
| _am_arg=$1 |
| _am_stamp_count=1 |
| for _am_header in $config_headers :; do |
| case $_am_header in |
| $_am_arg | $_am_arg:* ) |
| break ;; |
| * ) |
| _am_stamp_count=`expr $_am_stamp_count + 1` ;; |
| esac |
| done |
| echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) |
| |
| # Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation, |
| # Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 1 |
| |
| # AM_PROG_INSTALL_SH |
| # ------------------ |
| # Define $install_sh. |
| AC_DEFUN([AM_PROG_INSTALL_SH], |
| [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl |
| if test x"${install_sh}" != xset; then |
| case $am_aux_dir in |
| *\ * | *\ *) |
| install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; |
| *) |
| install_sh="\${SHELL} $am_aux_dir/install-sh" |
| esac |
| fi |
| AC_SUBST(install_sh)]) |
| |
| # Copyright (C) 2003, 2005 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 2 |
| |
| # Check whether the underlying file-system supports filenames |
| # with a leading dot. For instance MS-DOS doesn't. |
| AC_DEFUN([AM_SET_LEADING_DOT], |
| [rm -rf .tst 2>/dev/null |
| mkdir .tst 2>/dev/null |
| if test -d .tst; then |
| am__leading_dot=. |
| else |
| am__leading_dot=_ |
| fi |
| rmdir .tst 2>/dev/null |
| AC_SUBST([am__leading_dot])]) |
| |
| # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- |
| # From Jim Meyering |
| |
| # Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008, |
| # 2011 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 5 |
| |
| # AM_MAINTAINER_MODE([DEFAULT-MODE]) |
| # ---------------------------------- |
| # Control maintainer-specific portions of Makefiles. |
| # Default is to disable them, unless `enable' is passed literally. |
| # For symmetry, `disable' may be passed as well. Anyway, the user |
| # can override the default with the --enable/--disable switch. |
| AC_DEFUN([AM_MAINTAINER_MODE], |
| [m4_case(m4_default([$1], [disable]), |
| [enable], [m4_define([am_maintainer_other], [disable])], |
| [disable], [m4_define([am_maintainer_other], [enable])], |
| [m4_define([am_maintainer_other], [enable]) |
| m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) |
| AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) |
| dnl maintainer-mode's default is 'disable' unless 'enable' is passed |
| AC_ARG_ENABLE([maintainer-mode], |
| [ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful |
| (and sometimes confusing) to the casual installer], |
| [USE_MAINTAINER_MODE=$enableval], |
| [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) |
| AC_MSG_RESULT([$USE_MAINTAINER_MODE]) |
| AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) |
| MAINT=$MAINTAINER_MODE_TRUE |
| AC_SUBST([MAINT])dnl |
| ] |
| ) |
| |
| AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) |
| |
| # Check to see how 'make' treats includes. -*- Autoconf -*- |
| |
| # Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 4 |
| |
| # AM_MAKE_INCLUDE() |
| # ----------------- |
| # Check to see how make treats includes. |
| AC_DEFUN([AM_MAKE_INCLUDE], |
| [am_make=${MAKE-make} |
| cat > confinc << 'END' |
| am__doit: |
| @echo this is the am__doit target |
| .PHONY: am__doit |
| END |
| # If we don't find an include directive, just comment out the code. |
| AC_MSG_CHECKING([for style of include used by $am_make]) |
| am__include="#" |
| am__quote= |
| _am_result=none |
| # First try GNU make style include. |
| echo "include confinc" > confmf |
| # Ignore all kinds of additional output from `make'. |
| case `$am_make -s -f confmf 2> /dev/null` in #( |
| *the\ am__doit\ target*) |
| am__include=include |
| am__quote= |
| _am_result=GNU |
| ;; |
| esac |
| # Now try BSD make style include. |
| if test "$am__include" = "#"; then |
| echo '.include "confinc"' > confmf |
| case `$am_make -s -f confmf 2> /dev/null` in #( |
| *the\ am__doit\ target*) |
| am__include=.include |
| am__quote="\"" |
| _am_result=BSD |
| ;; |
| esac |
| fi |
| AC_SUBST([am__include]) |
| AC_SUBST([am__quote]) |
| AC_MSG_RESULT([$_am_result]) |
| rm -f confinc confmf |
| ]) |
| |
| # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- |
| |
| # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 |
| # Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 6 |
| |
| # AM_MISSING_PROG(NAME, PROGRAM) |
| # ------------------------------ |
| AC_DEFUN([AM_MISSING_PROG], |
| [AC_REQUIRE([AM_MISSING_HAS_RUN]) |
| $1=${$1-"${am_missing_run}$2"} |
| AC_SUBST($1)]) |
| |
| |
| # AM_MISSING_HAS_RUN |
| # ------------------ |
| # Define MISSING if not defined so far and test if it supports --run. |
| # If it does, set am_missing_run to use it, otherwise, to nothing. |
| AC_DEFUN([AM_MISSING_HAS_RUN], |
| [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl |
| AC_REQUIRE_AUX_FILE([missing])dnl |
| if test x"${MISSING+set}" != xset; then |
| case $am_aux_dir in |
| *\ * | *\ *) |
| MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; |
| *) |
| MISSING="\${SHELL} $am_aux_dir/missing" ;; |
| esac |
| fi |
| # Use eval to expand $SHELL |
| if eval "$MISSING --run true"; then |
| am_missing_run="$MISSING --run " |
| else |
| am_missing_run= |
| AC_MSG_WARN([`missing' script is too old or missing]) |
| fi |
| ]) |
| |
| # Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation, |
| # Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 1 |
| |
| # AM_PROG_MKDIR_P |
| # --------------- |
| # Check for `mkdir -p'. |
| AC_DEFUN([AM_PROG_MKDIR_P], |
| [AC_PREREQ([2.60])dnl |
| AC_REQUIRE([AC_PROG_MKDIR_P])dnl |
| dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, |
| dnl while keeping a definition of mkdir_p for backward compatibility. |
| dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. |
| dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of |
| dnl Makefile.ins that do not define MKDIR_P, so we do our own |
| dnl adjustment using top_builddir (which is defined more often than |
| dnl MKDIR_P). |
| AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl |
| case $mkdir_p in |
| [[\\/$]]* | ?:[[\\/]]*) ;; |
| */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; |
| esac |
| ]) |
| |
| # Helper functions for option handling. -*- Autoconf -*- |
| |
| # Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software |
| # Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 5 |
| |
| # _AM_MANGLE_OPTION(NAME) |
| # ----------------------- |
| AC_DEFUN([_AM_MANGLE_OPTION], |
| [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) |
| |
| # _AM_SET_OPTION(NAME) |
| # -------------------- |
| # Set option NAME. Presently that only means defining a flag for this option. |
| AC_DEFUN([_AM_SET_OPTION], |
| [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) |
| |
| # _AM_SET_OPTIONS(OPTIONS) |
| # ------------------------ |
| # OPTIONS is a space-separated list of Automake options. |
| AC_DEFUN([_AM_SET_OPTIONS], |
| [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) |
| |
| # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) |
| # ------------------------------------------- |
| # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. |
| AC_DEFUN([_AM_IF_OPTION], |
| [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) |
| |
| # Check to make sure that the build environment is sane. -*- Autoconf -*- |
| |
| # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 |
| # Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 5 |
| |
| # AM_SANITY_CHECK |
| # --------------- |
| AC_DEFUN([AM_SANITY_CHECK], |
| [AC_MSG_CHECKING([whether build environment is sane]) |
| # Just in case |
| sleep 1 |
| echo timestamp > conftest.file |
| # Reject unsafe characters in $srcdir or the absolute working directory |
| # name. Accept space and tab only in the latter. |
| am_lf=' |
| ' |
| case `pwd` in |
| *[[\\\"\#\$\&\'\`$am_lf]]*) |
| AC_MSG_ERROR([unsafe absolute working directory name]);; |
| esac |
| case $srcdir in |
| *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) |
| AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; |
| esac |
| |
| # Do `set' in a subshell so we don't clobber the current shell's |
| # arguments. Must try -L first in case configure is actually a |
| # symlink; some systems play weird games with the mod time of symlinks |
| # (eg FreeBSD returns the mod time of the symlink's containing |
| # directory). |
| if ( |
| set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` |
| if test "$[*]" = "X"; then |
| # -L didn't work. |
| set X `ls -t "$srcdir/configure" conftest.file` |
| fi |
| rm -f conftest.file |
| if test "$[*]" != "X $srcdir/configure conftest.file" \ |
| && test "$[*]" != "X conftest.file $srcdir/configure"; then |
| |
| # If neither matched, then we have a broken ls. This can happen |
| # if, for instance, CONFIG_SHELL is bash and it inherits a |
| # broken ls alias from the environment. This has actually |
| # happened. Such a system could not be considered "sane". |
| AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken |
| alias in your environment]) |
| fi |
| |
| test "$[2]" = conftest.file |
| ) |
| then |
| # Ok. |
| : |
| else |
| AC_MSG_ERROR([newly created file is older than distributed files! |
| Check your system clock]) |
| fi |
| AC_MSG_RESULT(yes)]) |
| |
| # Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 1 |
| |
| # AM_PROG_INSTALL_STRIP |
| # --------------------- |
| # One issue with vendor `install' (even GNU) is that you can't |
| # specify the program used to strip binaries. This is especially |
| # annoying in cross-compiling environments, where the build's strip |
| # is unlikely to handle the host's binaries. |
| # Fortunately install-sh will honor a STRIPPROG variable, so we |
| # always use install-sh in `make install-strip', and initialize |
| # STRIPPROG with the value of the STRIP variable (set by the user). |
| AC_DEFUN([AM_PROG_INSTALL_STRIP], |
| [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl |
| # Installed binaries are usually stripped using `strip' when the user |
| # run `make install-strip'. However `strip' might not be the right |
| # tool to use in cross-compilation environments, therefore Automake |
| # will honor the `STRIP' environment variable to overrule this program. |
| dnl Don't test for $cross_compiling = yes, because it might be `maybe'. |
| if test "$cross_compiling" != no; then |
| AC_CHECK_TOOL([STRIP], [strip], :) |
| fi |
| INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" |
| AC_SUBST([INSTALL_STRIP_PROGRAM])]) |
| |
| # Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 3 |
| |
| # _AM_SUBST_NOTMAKE(VARIABLE) |
| # --------------------------- |
| # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. |
| # This macro is traced by Automake. |
| AC_DEFUN([_AM_SUBST_NOTMAKE]) |
| |
| # AM_SUBST_NOTMAKE(VARIABLE) |
| # -------------------------- |
| # Public sister of _AM_SUBST_NOTMAKE. |
| AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) |
| |
| # Check how to create a tarball. -*- Autoconf -*- |
| |
| # Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # serial 2 |
| |
| # _AM_PROG_TAR(FORMAT) |
| # -------------------- |
| # Check how to create a tarball in format FORMAT. |
| # FORMAT should be one of `v7', `ustar', or `pax'. |
| # |
| # Substitute a variable $(am__tar) that is a command |
| # writing to stdout a FORMAT-tarball containing the directory |
| # $tardir. |
| # tardir=directory && $(am__tar) > result.tar |
| # |
| # Substitute a variable $(am__untar) that extract such |
| # a tarball read from stdin. |
| # $(am__untar) < result.tar |
| AC_DEFUN([_AM_PROG_TAR], |
| [# Always define AMTAR for backward compatibility. Yes, it's still used |
| # in the wild :-( We should find a proper way to deprecate it ... |
| AC_SUBST([AMTAR], ['$${TAR-tar}']) |
| m4_if([$1], [v7], |
| [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], |
| [m4_case([$1], [ustar],, [pax],, |
| [m4_fatal([Unknown tar format])]) |
| AC_MSG_CHECKING([how to create a $1 tar archive]) |
| # Loop over all known methods to create a tar archive until one works. |
| _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' |
| _am_tools=${am_cv_prog_tar_$1-$_am_tools} |
| # Do not fold the above two line into one, because Tru64 sh and |
| # Solaris sh will not grok spaces in the rhs of `-'. |
| for _am_tool in $_am_tools |
| do |
| case $_am_tool in |
| gnutar) |
| for _am_tar in tar gnutar gtar; |
| do |
| AM_RUN_LOG([$_am_tar --version]) && break |
| done |
| am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' |
| am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' |
| am__untar="$_am_tar -xf -" |
| ;; |
| plaintar) |
| # Must skip GNU tar: if it does not support --format= it doesn't create |
| # ustar tarball either. |
| (tar --version) >/dev/null 2>&1 && continue |
| am__tar='tar chf - "$$tardir"' |
| am__tar_='tar chf - "$tardir"' |
| am__untar='tar xf -' |
| ;; |
| pax) |
| am__tar='pax -L -x $1 -w "$$tardir"' |
| am__tar_='pax -L -x $1 -w "$tardir"' |
| am__untar='pax -r' |
| ;; |
| cpio) |
| am__tar='find "$$tardir" -print | cpio -o -H $1 -L' |
| am__tar_='find "$tardir" -print | cpio -o -H $1 -L' |
| am__untar='cpio -i -H $1 -d' |
| ;; |
| none) |
| am__tar=false |
| am__tar_=false |
| am__untar=false |
| ;; |
| esac |
| |
| # If the value was cached, stop now. We just wanted to have am__tar |
| # and am__untar set. |
| test -n "${am_cv_prog_tar_$1}" && break |
| |
| # tar/untar a dummy directory, and stop if the command works |
| rm -rf conftest.dir |
| mkdir conftest.dir |
| echo GrepMe > conftest.dir/file |
| AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) |
| rm -rf conftest.dir |
| if test -s conftest.tar; then |
| AM_RUN_LOG([$am__untar <conftest.tar]) |
| grep GrepMe conftest.dir/file >/dev/null 2>&1 && break |
| fi |
| done |
| rm -rf conftest.dir |
| |
| AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) |
| AC_MSG_RESULT([$am_cv_prog_tar_$1])]) |
| AC_SUBST([am__tar]) |
| AC_SUBST([am__untar]) |
| ]) # _AM_PROG_TAR |
| |
| m4_include([auxdir/acx_pthread.m4]) |
| m4_include([auxdir/libtool.m4]) |
| m4_include([auxdir/ltoptions.m4]) |
| m4_include([auxdir/ltsugar.m4]) |
| m4_include([auxdir/ltversion.m4]) |
| m4_include([auxdir/lt~obsolete.m4]) |
| m4_include([auxdir/slurm.m4]) |
| m4_include([auxdir/x_ac__system_configuration.m4]) |
| m4_include([auxdir/x_ac_affinity.m4]) |
| m4_include([auxdir/x_ac_aix.m4]) |
| m4_include([auxdir/x_ac_blcr.m4]) |
| m4_include([auxdir/x_ac_bluegene.m4]) |
| m4_include([auxdir/x_ac_cflags.m4]) |
| m4_include([auxdir/x_ac_cray.m4]) |
| m4_include([auxdir/x_ac_databases.m4]) |
| m4_include([auxdir/x_ac_debug.m4]) |
| m4_include([auxdir/x_ac_dlfcn.m4]) |
| m4_include([auxdir/x_ac_env.m4]) |
| m4_include([auxdir/x_ac_gpl_licensed.m4]) |
| m4_include([auxdir/x_ac_hwloc.m4]) |
| m4_include([auxdir/x_ac_iso.m4]) |
| m4_include([auxdir/x_ac_lua.m4]) |
| m4_include([auxdir/x_ac_man2html.m4]) |
| m4_include([auxdir/x_ac_munge.m4]) |
| m4_include([auxdir/x_ac_ncurses.m4]) |
| m4_include([auxdir/x_ac_nrt.m4]) |
| m4_include([auxdir/x_ac_pam.m4]) |
| m4_include([auxdir/x_ac_printf_null.m4]) |
| m4_include([auxdir/x_ac_ptrace.m4]) |
| m4_include([auxdir/x_ac_readline.m4]) |
| m4_include([auxdir/x_ac_rfc5424_time.m4]) |
| m4_include([auxdir/x_ac_setpgrp.m4]) |
| m4_include([auxdir/x_ac_setproctitle.m4]) |
| m4_include([auxdir/x_ac_sgi_job.m4]) |
| m4_include([auxdir/x_ac_slurm_ssl.m4]) |
| m4_include([auxdir/x_ac_sun_const.m4]) |
| m4_include([auxdir/x_ac_xcpu.m4]) |