drbd-utils/scripts/drbddisk

#!/bin/bash
#
# This script is inteded to be used as resource script by heartbeat
#
# Copright 2003-2008 LINBIT Information Technologies
# Philipp Reisner, Lars Ellenberg
#
###

DEFAULTFILE="/etc/default/drbd"
DRBDADM="/sbin/drbdadm"

if [ -f $DEFAULTFILE ]; then
  . $DEFAULTFILE
fi

if [ "$#" -eq 2 ]; then
  RES="$1"
  CMD="$2"
else
  RES="all"
  CMD="$1"
fi

## EXIT CODES
# since this is a "legacy heartbeat R1 resource agent" script,
# exit codes actually do not matter that much as long as we conform to
#  http://wiki.linux-ha.org/HeartbeatResourceAgent
# but it does not hurt to conform to lsb init-script exit codes,
# where we can.
#  http://refspecs.linux-foundation.org/LSB_3.1.0/
#	LSB-Core-generic/LSB-Core-generic/iniscrptact.html
####

drbd_set_role_from_proc_drbd()
{
	local out
	if ! test -e /proc/drbd; then
		ROLE="Unconfigured"
		return
	fi

	dev=$( $DRBDADM sh-dev $RES )
	minor=${dev#/dev/drbd}
	if [[ $minor = *[!0-9]* ]] ; then
		# sh-minor is only supported since drbd 8.3.1
		minor=$( $DRBDADM sh-minor $RES )
	fi
	if [[ -z $minor ]] || [[ $minor = *[!0-9]* ]] ; then
		ROLE=Unknown
		return
	fi

	if out=$(sed -ne "/^ *$minor: cs:/ { s/:/ /g; p; q; }" /proc/drbd); then
		set -- $out
		ROLE=${5%/*}
		: ${ROLE:=Unconfigured} # if it does not show up
	else
		ROLE=Unknown
	fi
}

case "$CMD" in
    start)
	# try several times, in case heartbeat deadtime
	# was smaller than drbd ping time
	try=6
	while true; do
		$DRBDADM primary $RES && break
		let "--try" || exit 1 # LSB generic error
		sleep 1
	done
	;;
    stop)
	# heartbeat (haresources mode) will retry failed stop
	# for a number of times in addition to this internal retry.
	try=3
	while true; do
		$DRBDADM secondary $RES && break
		# We used to lie here, and pretend success for anything != 11,
		# to avoid the reboot on failed stop recovery for "simple
		# config errors" and such. But that is incorrect.
		# Don't lie to your cluster manager.
		# And don't do config errors...
		let --try || exit 1 # LSB generic error
		sleep 1
	done
	;;
    status)
	if [ "$RES" = "all" ]; then
	    echo "A resource name is required for status inquiries."
	    exit 10
	fi
	ST=$( $DRBDADM role $RES )
	ROLE=${ST%/*}
	case $ROLE in
	Primary|Secondary|Unconfigured)
		# expected
		;;
	*)
		# unexpected. whatever...
		# If we are unsure about the state of a resource, we need to
		# report it as possibly running, so heartbeat can, after failed
		# stop, do a recovery by reboot.
		# drbdsetup may fail for obscure reasons, e.g. if /var/lock/ is
		# suddenly readonly.  So we retry by parsing /proc/drbd.
		drbd_set_role_from_proc_drbd
	esac
	case $ROLE in
		Primary)
			echo "running (Primary)"
			exit 0 # LSB status "service is OK"
			;;
		Secondary|Unconfigured)
			echo "stopped ($ROLE)"
			exit 3 # LSB status "service is not running"
			;;
		*)
			# NOTE the "running" in below message.
			# this is a "heartbeat" resource script,
			# the exit code is _ignored_.
			echo "cannot determine status, may be running ($ROLE)"
			exit 4 #  LSB status "service status is unknown"
			;;
	esac
	;;
    *)
	echo "Usage: drbddisk [resource] {start|stop|status}"
	exit 1
	;;
esac

exit 0