zfs/tests/zfs-tests/tests/functional/cli_root/zdb/zdb_objset_id.ksh

#!/bin/ksh

#
# This file and its contents are supplied under the terms of the
# Common Development and Distribution License ("CDDL"), version 1.0.
# You may only use this file in accordance with the terms of version
# 1.0 of the CDDL.
#
# A full copy of the text of the CDDL should have accompanied this
# source.  A copy of the CDDL is also available via the Internet at
# http://www.illumos.org/license/CDDL.
#

#
# Copyright (c) 2020 by Datto, Inc. All rights reserved.
#

. $STF_SUITE/include/libtest.shlib

#
# Description:
# zdb -d pool/<objset id> will display the dataset
#
# Strategy:
# 1. Create a pool
# 2. Write some data to a file
# 3. Get the inode number (object number) of the file
# 4. Run zdb -d to get the objset ID of the dataset
# 5. Run zdb -dddddd pool/objsetID objectID (decimal)
# 6. Confirm names
# 7. Run zdb -dddddd pool/objsetID objectID (hex) 
# 8. Confirm names
# 9. Repeat with zdb -NNNNNN pool/objsetID objectID
# 10. Obtain objsetID from /proc/spl/kstat/zfs/testpool/obset-0x<ID>
#    (linux only)
# 11. Run zdb -dddddd pool/objsetID (hex)
# 12. Match name from zdb against proc entry
# 13. Create dataset with hex numeric name
# 14. Create dataset with decimal numeric name
# 15. zdb -d for numeric datasets succeeds
# 16. zdb -N for numeric datasets fails
# 17. zdb -dN for numeric datasets fails
#

function cleanup
{
	datasetexists $TESTPOOL && destroy_pool $TESTPOOL
}

log_assert "Verify zdb -d <pool>/<objset ID> generates the correct names."
log_onexit cleanup
init_data=$TESTDIR/file1
write_count=8
blksize=131072
verify_runnable "global"
verify_disk_count "$DISKS" 2
hex_ds=$TESTPOOL/0x400000
num_ds=$TESTPOOL/100000

default_mirror_setup_noexit $DISKS
file_write -o create -w -f $init_data -b $blksize -c $write_count

# get object number of file
listing=$(ls -i $init_data)
set -A array $listing
obj=${array[0]}
log_note "file $init_data has object number $obj"
sync_pool $TESTPOOL

output=$(zdb -d $TESTPOOL/$TESTFS)
objset_id=$(echo $output | awk '{split($0,array,",")} END{print array[2]}' |
    awk '{split($0,array," ")} END{print array[2]}')
objset_hex=$(printf "0x%X" $objset_id)
log_note "objset $TESTPOOL/$TESTFS has objset ID $objset_id ($objset_hex)"

for id in "$objset_id" "$objset_hex"
do
	log_note "zdb -dddddd $TESTPOOL/$id $obj"
	output=$(zdb -dddddd $TESTPOOL/$id $obj)
	reason="($TESTPOOL/$TESTFS not in zdb output)"
	echo $output |grep "$TESTPOOL/$TESTFS" > /dev/null
	(( $? != 0 )) && log_fail \
	    "zdb -dddddd $TESTPOOL/$id $obj failed $reason"
	reason="(file1 not in zdb output)"
	echo $output |grep "file1" > /dev/null
	(( $? != 0 )) && log_fail \
	    "zdb -dddddd $TESTPOOL/$id $obj failed $reason"
	obj=$(printf "0x%X" $obj)

 	log_note "zdb -NNNNNN $TESTPOOL/$id $obj"
        output=$(zdb -NNNNNN $TESTPOOL/$id $obj)
        reason="($TESTPOOL/$TESTFS not in zdb output)"
        echo $output |grep "$TESTPOOL/$TESTFS" > /dev/null
        (( $? != 0 )) && log_fail \
            "zdb -NNNNNN $TESTPOOL/$id $obj failed $reason"
        reason="(file1 not in zdb output)"
        echo $output |grep "file1" > /dev/null
        (( $? != 0 )) && log_fail \
            "zdb -NNNNNN $TESTPOOL/$id $obj failed $reason"
done

if is_linux; then
	output=$(ls -1 /proc/spl/kstat/zfs/$TESTPOOL |grep objset- |tail -1)
	objset_hex=${output#*-}
	name_from_proc=$(cat /proc/spl/kstat/zfs/$TESTPOOL/$output |
	    grep dataset_name | awk '{split($0,array," ")} END{print array[3]}')
	log_note "checking zdb output for $name_from_proc"
	reason="(name $name_from_proc from proc not in zdb output)"
	log_note "zdb -dddddd $TESTPOOL/$objset_hex"
	output=$(zdb -dddddd $TESTPOOL/$objset_hex)
	echo $output |grep "$name_from_proc" > /dev/null
	(( $? != 0 )) && log_fail \
	    "zdb -dddddd $TESTPOOL/$objset_hex failed $reason"
fi

log_must zfs create $hex_ds
log_must zfs create $num_ds
output=$(zdb -d $hex_ds)
reason="($TESTPOOL/0x400 not in zdb output)"
echo $output |grep "$hex_ds" > /dev/null
(( $? != 0 )) && log_fail \
     "zdb -d $hex_ds failed $reason"
output=$(zdb -d $num_ds)
reason="($num_ds not in zdb output)"
echo $output |grep "$num_ds" > /dev/null
    "zdb -d $TESTPOOL/0x400 failed $reason"

# force numeric interpretation, should fail
log_mustnot zdb -N $hex_ds
log_mustnot zdb -N $num_ds
log_mustnot zdb -Nd $hex_ds
log_mustnot zdb -Nd $num_ds

log_pass "zdb -d <pool>/<objset ID> generates the correct names."