| #!/bin/ksh -p |
| # |
| # CDDL HEADER START |
| # |
| # The contents of this file are subject to the terms of the |
| # Common Development and Distribution License (the "License"). |
| # You may not use this file except in compliance with the License. |
| # |
| # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE |
| # or http://www.opensolaris.org/os/licensing. |
| # See the License for the specific language governing permissions |
| # and limitations under the License. |
| # |
| # When distributing Covered Code, include this CDDL HEADER in each |
| # file and include the License file at usr/src/OPENSOLARIS.LICENSE. |
| # If applicable, add the following below this CDDL HEADER, with the |
| # fields enclosed by brackets "[]" replaced with your own identifying |
| # information: Portions Copyright [yyyy] [name of copyright owner] |
| # |
| # CDDL HEADER END |
| # |
| |
| # |
| # Copyright 2009 Sun Microsystems, Inc. All rights reserved. |
| # Use is subject to license terms. |
| # |
| |
| # |
| # Copyright (c) 2016 by Delphix. All rights reserved. |
| # Copyright (c) 2021 Matt Fiddaman |
| # |
| |
| . $STF_SUITE/tests/functional/cli_root/zfs_get/zfs_get_common.kshlib |
| . $STF_SUITE/tests/functional/cli_root/zfs_get/zfs_get_list_d.kshlib |
| |
| # |
| # DESCRIPTION: |
| # Setting the valid option and properties, 'zfs get' should return the |
| # correct property value. |
| # |
| # STRATEGY: |
| # 1. Create pool, filesystem, volume, snapshot, and bookmark. |
| # 2. Setting valid parameter, 'zfs get' should succeed. |
| # 3. Compare the output property name with the original input property. |
| # |
| |
| verify_runnable "both" |
| |
| typeset options=("" "-p" "-r" "-H") |
| |
| typeset -i i=${#options[*]} |
| typeset -i j=0 |
| while ((j<${#depth_options[*]})); |
| do |
| options[$i]=-"${depth_options[$j]}" |
| ((j+=1)) |
| ((i+=1)) |
| done |
| |
| typeset zfs_props=("type" used available creation volsize referenced \ |
| compressratio mounted origin recordsize quota reservation mountpoint \ |
| sharenfs checksum compression atime devices exec readonly setuid \ |
| snapdir aclinherit canmount primarycache secondarycache version \ |
| usedbychildren usedbydataset usedbyrefreservation usedbysnapshots) |
| if is_freebsd; then |
| typeset zfs_props_os=(jailed aclmode) |
| else |
| typeset zfs_props_os=(zoned acltype) |
| fi |
| typeset userquota_props=(userquota@root groupquota@root userused@root \ |
| groupused@root) |
| typeset all_props=("${zfs_props[@]}" \ |
| "${zfs_props_os[@]}" \ |
| "${userquota_props[@]}") |
| typeset dataset=($TESTPOOL/$TESTCTR $TESTPOOL/$TESTFS $TESTPOOL/$TESTVOL \ |
| $TESTPOOL/$TESTFS@$TESTSNAP $TESTPOOL/$TESTVOL@$TESTSNAP |
| $TESTPOOL/$TESTFS@$TESTSNAP1 $TESTPOOL/$TESTCLONE) |
| |
| typeset bookmark_props=(creation) |
| typeset bookmark=($TESTPOOL/$TESTFS#$TESTBKMARK $TESTPOOL/$TESTVOL#$TESTBKMARK) |
| |
| # |
| # According to dataset and option, checking if 'zfs get' return correct |
| # property information. |
| # |
| # $1 dataset |
| # $2 properties which are expected to output into $TESTDIR/$TESTFILE0 |
| # $3 option |
| # |
| function check_return_value |
| { |
| typeset dst=$1 |
| typeset props=$2 |
| typeset opt=$3 |
| typeset -i found=0 |
| typeset p |
| |
| for p in $props; do |
| found=0 |
| |
| while read line; do |
| typeset item |
| item=$(echo $line | awk '{print $2}' 2>&1) |
| |
| if [[ $item == $p ]]; then |
| ((found += 1)) |
| cols=$(echo $line | awk '{print NF}') |
| break |
| fi |
| done < $TESTDIR/$TESTFILE0 |
| |
| if ((found == 0)); then |
| log_fail "'zfs get $opt $props $dst' return " \ |
| "error message.'$p' haven't been found." |
| elif [[ "$opt" == "-p" ]] && ((cols != 4)); then |
| log_fail "'zfs get $opt $props $dst' returned " \ |
| "$cols columns instead of 4." |
| fi |
| done |
| |
| log_note "SUCCESS: 'zfs get $opt $prop $dst'." |
| } |
| |
| log_assert "Setting the valid options and properties 'zfs get' should return " \ |
| "the correct property value." |
| log_onexit cleanup |
| |
| # Create filesystem and volume's snapshot |
| create_snapshot $TESTPOOL/$TESTFS $TESTSNAP |
| create_snapshot $TESTPOOL/$TESTVOL $TESTSNAP |
| |
| # Create second snapshot and clone it |
| create_snapshot $TESTPOOL/$TESTFS $TESTSNAP1 |
| create_clone $TESTPOOL/$TESTFS@$TESTSNAP1 $TESTPOOL/$TESTCLONE |
| |
| # Create filesystem and volume's bookmark |
| create_bookmark $TESTPOOL/$TESTFS $TESTSNAP $TESTBKMARK |
| create_bookmark $TESTPOOL/$TESTVOL $TESTSNAP $TESTBKMARK |
| |
| typeset -i i=0 |
| while ((i < ${#dataset[@]})); do |
| for opt in "${options[@]}"; do |
| for prop in ${all_props[@]}; do |
| eval "zfs get $opt $prop ${dataset[i]} > \ |
| $TESTDIR/$TESTFILE0" |
| ret=$? |
| if [[ $ret != 0 ]]; then |
| log_fail "zfs get returned: $ret" |
| fi |
| check_return_value ${dataset[i]} "$prop" "$opt" |
| done |
| done |
| ((i += 1)) |
| done |
| |
| i=0 |
| while ((i < ${#bookmark[@]})); do |
| for opt in "${options[@]}"; do |
| for prop in ${bookmark_props[@]}; do |
| eval "zfs get $opt $prop ${bookmark[i]} > \ |
| $TESTDIR/$TESTFILE0" |
| ret=$? |
| if [[ $ret != 0 ]]; then |
| log_fail "zfs get returned: $ret" |
| fi |
| check_return_value ${bookmark[i]} "$prop" "$opt" |
| done |
| done |
| ((i += 1)) |
| done |
| |
| log_pass "Setting the valid options to dataset, it should succeed and return " \ |
| "valid value. 'zfs get' pass." |