| #!/bin/ksh -p |
| # |
| # CDDL HEADER START |
| # |
| # The contents of this file are subject to the terms of the |
| # Common Development and Distribution License (the "License"). |
| # You may not use this file except in compliance with the License. |
| # |
| # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE |
| # or http://www.opensolaris.org/os/licensing. |
| # See the License for the specific language governing permissions |
| # and limitations under the License. |
| # |
| # When distributing Covered Code, include this CDDL HEADER in each |
| # file and include the License file at usr/src/OPENSOLARIS.LICENSE. |
| # If applicable, add the following below this CDDL HEADER, with the |
| # fields enclosed by brackets "[]" replaced with your own identifying |
| # information: Portions Copyright [yyyy] [name of copyright owner] |
| # |
| # CDDL HEADER END |
| # |
| |
| # |
| # Copyright 2009 Sun Microsystems, Inc. All rights reserved. |
| # Use is subject to license terms. |
| # |
| |
| # |
| # Copyright (c) 2013, 2016 by Delphix. All rights reserved. |
| # |
| |
| . $STF_SUITE/tests/functional/rsend/rsend.kshlib |
| |
| # |
| # DESCRIPTION: |
| # zfs send -R will backup all the filesystem properties correctly. |
| # |
| # STRATEGY: |
| # 1. Setting properties for all the filesystem and volumes randomly |
| # 2. Backup all the data from POOL by send -R |
| # 3. Restore all the data in POOL2 |
| # 4. Verify all the properties in the two pools are the same |
| # |
| |
| verify_runnable "global" |
| |
| function edited_prop |
| { |
| typeset behaviour=$1 |
| typeset ds=$2 |
| typeset backfile=$TESTDIR/edited_prop_$ds |
| |
| case $behaviour in |
| "get") |
| typeset props=$(zfs inherit 2>&1 | \ |
| awk '$2=="YES" {print $1}' | \ |
| egrep -v "^vol|\.\.\.$") |
| for item in $props ; do |
| if [[ $item == "mlslabel" ]] && \ |
| ! is_te_enabled ; then |
| continue |
| fi |
| zfs get -H -o property,value $item $ds >> \ |
| $backfile |
| if (($? != 0)); then |
| log_fail "zfs get -H -o property,value"\ |
| "$item $ds > $backfile" |
| fi |
| done |
| ;; |
| "set") |
| if [[ ! -f $backfile ]] ; then |
| log_fail "$ds need backup properties firstly." |
| fi |
| |
| typeset prop value |
| while read prop value ; do |
| eval zfs set $prop='$value' $ds |
| if (($? != 0)); then |
| log_fail "zfs set $prop=$value $ds" |
| fi |
| done < $backfile |
| ;; |
| *) |
| log_fail "Unrecognized behaviour: $behaviour" |
| esac |
| } |
| |
| function cleanup |
| { |
| log_must cleanup_pool $POOL |
| log_must cleanup_pool $POOL2 |
| |
| log_must edited_prop "set" $POOL |
| log_must edited_prop "set" $POOL2 |
| |
| typeset prop |
| for prop in $(fs_inherit_prop) ; do |
| log_must zfs inherit $prop $POOL |
| log_must zfs inherit $prop $POOL2 |
| done |
| |
| log_must setup_test_model $POOL |
| |
| if [[ -d $TESTDIR ]]; then |
| log_must rm -rf $TESTDIR/* |
| fi |
| } |
| |
| log_assert "Verify zfs send -R will backup all the filesystem properties " \ |
| "correctly." |
| log_onexit cleanup |
| |
| log_must edited_prop "get" $POOL |
| log_must edited_prop "get" $POOL2 |
| |
| for fs in "$POOL" "$POOL/pclone" "$POOL/$FS" "$POOL/$FS/fs1" \ |
| "$POOL/$FS/fs1/fs2" "$POOL/$FS/fs1/fclone" ; do |
| rand_set_prop $fs aclinherit "discard" "noallow" "secure" "passthrough" |
| rand_set_prop $fs checksum "on" "off" "fletcher2" "fletcher4" "sha256" |
| rand_set_prop $fs acltype "off" "noacl" "posixacl" |
| rand_set_prop $fs atime "on" "off" |
| rand_set_prop $fs checksum "on" "off" "fletcher2" "fletcher4" "sha256" |
| rand_set_prop $fs compression "on" "off" "lzjb" "gzip" \ |
| "gzip-1" "gzip-2" "gzip-3" "gzip-4" "gzip-5" "gzip-6" \ |
| "gzip-7" "gzip-8" "gzip-9" |
| rand_set_prop $fs copies "1" "2" "3" |
| rand_set_prop $fs devices "on" "off" |
| rand_set_prop $fs exec "on" "off" |
| rand_set_prop $fs quota "512M" "1024M" |
| rand_set_prop $fs recordsize "512" "2K" "8K" "32K" "128K" |
| rand_set_prop $fs dnodesize "legacy" "auto" "1k" "2k" "4k" "8k" "16k" |
| rand_set_prop $fs setuid "on" "off" |
| rand_set_prop $fs snapdir "hidden" "visible" |
| rand_set_prop $fs xattr "on" "off" |
| rand_set_prop $fs user:prop "aaa" "bbb" "23421" "()-+?" |
| done |
| |
| for vol in "$POOL/vol" "$POOL/$FS/vol" ; do |
| rand_set_prop $vol checksum "on" "off" "fletcher2" "fletcher4" "sha256" |
| rand_set_prop $vol compression "on" "off" "lzjb" "gzip" \ |
| "gzip-1" "gzip-2" "gzip-3" "gzip-4" "gzip-5" "gzip-6" \ |
| "gzip-7" "gzip-8" "gzip-9" |
| rand_set_prop $vol readonly "on" "off" |
| rand_set_prop $vol copies "1" "2" "3" |
| rand_set_prop $vol user:prop "aaa" "bbb" "23421" "()-+?" |
| done |
| |
| |
| # Verify inherited property can be received |
| rand_set_prop $POOL redundant_metadata "all" "most" |
| rand_set_prop $POOL sync "standard" "always" "disabled" |
| |
| # |
| # Duplicate POOL2 for testing |
| # |
| log_must eval "zfs send -R $POOL@final > $BACKDIR/pool-final-R" |
| log_must eval "zfs receive -d -F $POOL2 < $BACKDIR/pool-final-R" |
| |
| # |
| # Define all the POOL/POOL2 datasets pair |
| # |
| set -A pair "$POOL" "$POOL2" \ |
| "$POOL/$FS" "$POOL2/$FS" \ |
| "$POOL/$FS/fs1" "$POOL2/$FS/fs1" \ |
| "$POOL/$FS/fs1/fs2" "$POOL2/$FS/fs1/fs2" \ |
| "$POOL/pclone" "$POOL2/pclone" \ |
| "$POOL/$FS/fs1/fclone" "$POOL2/$FS/fs1/fclone" \ |
| "$POOL/vol" "$POOL2/vol" \ |
| "$POOL/$FS/vol" "$POOL2/$FS/vol" |
| |
| typeset -i i=0 |
| while ((i < ${#pair[@]})); do |
| log_must cmp_ds_prop ${pair[$i]} ${pair[((i+1))]} |
| |
| ((i += 2)) |
| done |
| |
| |
| zpool upgrade -v | grep "Snapshot properties" > /dev/null 2>&1 |
| if (( $? == 0 )) ; then |
| i=0 |
| while ((i < ${#pair[@]})); do |
| log_must cmp_ds_prop ${pair[$i]}@final ${pair[((i+1))]}@final |
| ((i += 2)) |
| done |
| fi |
| |
| log_pass "Verify zfs send -R will backup all the filesystem properties " \ |
| "correctly." |