| #!/bin/ksh -p |
| # |
| # CDDL HEADER START |
| # |
| # The contents of this file are subject to the terms of the |
| # Common Development and Distribution License (the "License"). |
| # You may not use this file except in compliance with the License. |
| # |
| # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE |
| # or http://www.opensolaris.org/os/licensing. |
| # See the License for the specific language governing permissions |
| # and limitations under the License. |
| # |
| # When distributing Covered Code, include this CDDL HEADER in each |
| # file and include the License file at usr/src/OPENSOLARIS.LICENSE. |
| # If applicable, add the following below this CDDL HEADER, with the |
| # fields enclosed by brackets "[]" replaced with your own identifying |
| # information: Portions Copyright [yyyy] [name of copyright owner] |
| # |
| # CDDL HEADER END |
| # |
| |
| # |
| # Copyright 2007 Sun Microsystems, Inc. All rights reserved. |
| # Use is subject to license terms. |
| # |
| |
| . $STF_SUITE/tests/functional/slog/slog.kshlib |
| |
| # |
| # DESCRIPTION: |
| # Verify slogs are replayed correctly. This test is a direct |
| # adaptation of the ziltest.sh script for the ZFS Test Suite. |
| # |
| # The general idea is to build up an intent log from a bunch of |
| # diverse user commands without actually committing them to the |
| # file system. Then copy the file system, replay the intent |
| # log and compare the file system and the copy. |
| # |
| # To enable this automated testing of the intent log some minimal |
| # support is required of the file system. In particular, a |
| # "freeze" command is required to flush the in-flight transactions; |
| # to stop the actual committing of transactions; and to ensure no |
| # deltas are discarded. All deltas past a freeze point are kept |
| # for replay and comparison later. Here is the flow: |
| # |
| # STRATEGY: |
| # 1. Create an empty file system (TESTFS) |
| # 2. Freeze TESTFS |
| # 3. Run various user commands that create files, directories and ACLs |
| # 4. Copy TESTFS to temporary location (TESTDIR/copy) |
| # 5. Unmount filesystem |
| # <at this stage TESTFS is empty again and unfrozen, and the |
| # intent log contains a complete set of deltas to replay it> |
| # 6. Remount TESTFS <which replays the intent log> |
| # 7. Compare TESTFS against the TESTDIR/copy |
| # |
| |
| verify_runnable "global" |
| |
| log_assert "Replay of intent log succeeds." |
| log_onexit cleanup |
| log_must setup |
| |
| # |
| # 1. Create an empty file system (TESTFS) |
| # |
| log_must zpool create $TESTPOOL $VDEV log mirror $LDEV |
| log_must zfs set compression=on $TESTPOOL |
| log_must zfs create $TESTPOOL/$TESTFS |
| |
| # |
| # This dd command works around an issue where ZIL records aren't created |
| # after freezing the pool unless a ZIL header already exists. Create a file |
| # synchronously to force ZFS to write one out. |
| # |
| log_must dd if=/dev/zero of=/$TESTPOOL/$TESTFS/sync \ |
| conv=fdatasync,fsync bs=1 count=1 |
| |
| # |
| # 2. Freeze TESTFS |
| # |
| log_must zpool freeze $TESTPOOL |
| |
| # |
| # 3. Run various user commands that create files, directories and ACLs |
| # |
| |
| # TX_CREATE |
| log_must touch /$TESTPOOL/$TESTFS/a |
| |
| # TX_RENAME |
| log_must mv /$TESTPOOL/$TESTFS/a /$TESTPOOL/$TESTFS/b |
| |
| # TX_SYMLINK |
| log_must touch /$TESTPOOL/$TESTFS/c |
| log_must ln -s /$TESTPOOL/$TESTFS/c /$TESTPOOL/$TESTFS/d |
| |
| # TX_LINK |
| log_must touch /$TESTPOOL/$TESTFS/e |
| log_must ln /$TESTPOOL/$TESTFS/e /$TESTPOOL/$TESTFS/f |
| |
| # TX_MKDIR |
| log_must mkdir /$TESTPOOL/$TESTFS/dir_to_delete |
| |
| # TX_RMDIR |
| log_must rmdir /$TESTPOOL/$TESTFS/dir_to_delete |
| |
| # Create a simple validation payload |
| log_must mkdir -p $TESTDIR |
| log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS/payload bs=1k count=8 |
| typeset checksum=$(sha256digest /$TESTPOOL/$TESTFS/payload) |
| |
| # TX_WRITE (small file with ordering) |
| log_must mkfile 1k /$TESTPOOL/$TESTFS/small_file |
| log_must mkfile 512b /$TESTPOOL/$TESTFS/small_file |
| |
| # TX_CREATE, TX_MKDIR, TX_REMOVE, TX_RMDIR |
| log_must cp -R /usr/share/dict /$TESTPOOL/$TESTFS |
| log_must rm -rf /$TESTPOOL/$TESTFS/dict |
| |
| # TX_SETATTR |
| log_must touch /$TESTPOOL/$TESTFS/setattr |
| log_must chmod 567 /$TESTPOOL/$TESTFS/setattr |
| log_must chgrp root /$TESTPOOL/$TESTFS/setattr |
| log_must touch -cm -t 201311271200 /$TESTPOOL/$TESTFS/setattr |
| |
| # TX_TRUNCATE (to zero) |
| log_must mkfile 4k /$TESTPOOL/$TESTFS/truncated_file |
| log_must truncate -s 0 /$TESTPOOL/$TESTFS/truncated_file |
| |
| # TX_WRITE (large file) |
| log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS/large \ |
| bs=128k count=64 oflag=sync |
| |
| # Write zeros, which compress to holes, in the middle of a file |
| log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS/holes.1 bs=128k count=8 |
| log_must dd if=/dev/zero of=/$TESTPOOL/$TESTFS/holes.1 bs=128k count=2 |
| |
| log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS/holes.2 bs=128k count=8 |
| log_must dd if=/dev/zero of=/$TESTPOOL/$TESTFS/holes.2 bs=128k count=2 seek=2 |
| |
| log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS/holes.3 bs=128k count=8 |
| log_must dd if=/dev/zero of=/$TESTPOOL/$TESTFS/holes.3 bs=128k count=2 \ |
| seek=2 conv=notrunc |
| |
| # TX_MKXATTR |
| log_must mkdir /$TESTPOOL/$TESTFS/xattr.dir |
| log_must attr -qs fileattr -V HelloWorld /$TESTPOOL/$TESTFS/xattr.dir |
| log_must attr -qs tmpattr -V HelloWorld /$TESTPOOL/$TESTFS/xattr.dir |
| log_must attr -qr tmpattr /$TESTPOOL/$TESTFS/xattr.dir |
| |
| log_must touch /$TESTPOOL/$TESTFS/xattr.file |
| log_must attr -qs fileattr -V HelloWorld /$TESTPOOL/$TESTFS/xattr.file |
| log_must attr -qs tmpattr -V HelloWorld /$TESTPOOL/$TESTFS/xattr.file |
| log_must attr -qr tmpattr /$TESTPOOL/$TESTFS/xattr.file |
| |
| # TX_WRITE, TX_LINK, TX_REMOVE |
| # Make sure TX_REMOVE won't affect TX_WRITE if file is not destroyed |
| log_must dd if=/dev/urandom of=/$TESTPOOL/$TESTFS/link_and_unlink bs=128k \ |
| count=8 |
| log_must ln /$TESTPOOL/$TESTFS/link_and_unlink \ |
| /$TESTPOOL/$TESTFS/link_and_unlink.link |
| log_must rm /$TESTPOOL/$TESTFS/link_and_unlink.link |
| |
| # |
| # 4. Copy TESTFS to temporary location (TESTDIR/copy) |
| # |
| log_must mkdir -p $TESTDIR/copy |
| log_must cp -a /$TESTPOOL/$TESTFS/* $TESTDIR/copy/ |
| |
| # |
| # 5. Unmount filesystem and export the pool |
| # |
| # At this stage TESTFS is empty again and frozen, the intent log contains |
| # a complete set of deltas to replay. |
| # |
| log_must zfs unmount /$TESTPOOL/$TESTFS |
| |
| log_note "Verify transactions to replay:" |
| log_must zdb -iv $TESTPOOL/$TESTFS |
| |
| log_must zpool export $TESTPOOL |
| |
| # |
| # 6. Remount TESTFS <which replays the intent log> |
| # |
| # Import the pool to unfreeze it and claim log blocks. It has to be |
| # `zpool import -f` because we can't write a frozen pool's labels! |
| # |
| log_must zpool import -f -d $VDIR $TESTPOOL |
| |
| # |
| # 7. Compare TESTFS against the TESTDIR/copy |
| # |
| log_note "Verify current block usage:" |
| log_must zdb -bcv $TESTPOOL |
| |
| log_note "Verify copy of xattrs:" |
| log_must attr -l /$TESTPOOL/$TESTFS/xattr.dir |
| log_must attr -l /$TESTPOOL/$TESTFS/xattr.file |
| |
| log_note "Verify working set diff:" |
| log_must diff -r /$TESTPOOL/$TESTFS $TESTDIR/copy |
| |
| log_note "Verify file checksum:" |
| typeset checksum1=$(sha256digest /$TESTPOOL/$TESTFS/payload) |
| [[ "$checksum1" == "$checksum" ]] || \ |
| log_fail "checksum mismatch ($checksum1 != $checksum)" |
| |
| log_pass "Replay of intent log succeeds." |
