| /* |
| * Copyright (c) 2006-2007 Douglas Gilbert. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| */ |
| |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <getopt.h> |
| #define __STDC_FORMAT_MACROS 1 |
| #include <inttypes.h> |
| #include <sys/ioctl.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| |
| #include "sg_lib.h" |
| #include "sg_io_linux.h" |
| |
| /* This program uses a ATA PASS-THROUGH (16) SCSI command defined |
| by SAT to package an ATA READ LOG EXT (2Fh) command to fetch |
| log page 11h. That page contains SATA phy event counters. |
| For SAT see http://www.t10.org [draft prior to standard: sat-r09.pdf] |
| For ATA READ LOG EXT command see ATA-8/ACS at www.t13.org . |
| For SATA phy counter definitions see SATA 2.5 . |
| |
| Invocation: sg_sat_phy_event [-v] [-V] <device> |
| |
| */ |
| |
| #define SAT_ATA_PASS_THROUGH16 0x85 |
| #define SAT_ATA_PASS_THROUGH16_LEN 16 |
| #define SAT_ATA_RETURN_DESC 9 /* ATA Return Descriptor */ |
| |
| #define ATA_READ_LOG_EXT 0x2f |
| #define SATA_PHY_EVENT_LPAGE 0x11 |
| #define READ_LOG_EXT_RESPONSE_LEN 512 |
| |
| #define EBUFF_SZ 256 |
| |
| static const char * version_str = "1.00 20070507"; |
| |
| static struct option long_options[] = { |
| {"help", no_argument, 0, 'h'}, |
| {"hex", no_argument, 0, 'H'}, |
| {"ignore", no_argument, 0, 'i'}, |
| {"raw", no_argument, 0, 'r'}, |
| {"reset", no_argument, 0, 'R'}, |
| {"verbose", no_argument, 0, 'v'}, |
| {"version", no_argument, 0, 'V'}, |
| {0, 0, 0, 0}, |
| }; |
| |
| static void usage() |
| { |
| fprintf(stderr, "Usage: " |
| "sg_sat_phy_event [--help] [--hex] [--raw] [--reset] [--verbose]\n" |
| " [--version] DEVICE\n" |
| " where:\n" |
| " --help|-h print this usage message then exit\n" |
| " --hex|-H output response in hex bytes, use twice for\n" |
| " hex words\n" |
| " --ignore|-i ignore identifier names, output id value " |
| "instead\n" |
| " --raw|-r output response in binary to stdout\n" |
| " --reset|-R reset counters (after read)\n" |
| " --verbose|-v increase verbosity\n" |
| " --version|-V print version string then exit\n\n" |
| "Sends an ATA READ LOG EXT command via a SAT pass through to " |
| "fetch\nlog page 11h which contains SATA phy event counters\n"); |
| } |
| |
| struct phy_event_t { |
| int id; |
| const char * desc; |
| }; |
| |
| static struct phy_event_t phy_event_arr[] = { |
| {0x1, "Command failed and ICRC error bit set in Error register"}, |
| {0x2, "R_ERR(p) response for data FIS"}, |
| {0x3, "R_ERR(p) response for device-to-host data FIS"}, |
| {0x4, "R_ERR(p) response for host-to-device data FIS"}, |
| {0x5, "R_ERR(p) response for non-data FIS"}, |
| {0x6, "R_ERR(p) response for device-to-host non-data FIS"}, |
| {0x7, "R_ERR(p) response for host-to-device non-data FIS"}, |
| {0x8, "Device-to-host non-data FIS retries"}, |
| {0x9, "Transition from drive PHYRDY to drive PHYRDYn"}, |
| {0xa, "Signature device-to-host register FISes due to COMRESET"}, |
| {0xb, "CRC errors within host-to-device FIS"}, |
| {0xd, "non CRC errors within host-to-device FIS"}, |
| {0xf, "R_ERR(p) response for host-to-device data FIS, CRC"}, |
| {0x10, "R_ERR(p) response for host-to-device data FIS, non-CRC"}, |
| {0x12, "R_ERR(p) response for host-to-device non-data FIS, CRC"}, |
| {0x13, "R_ERR(p) response for host-to-device non-data FIS, non-CRC"}, |
| {0xc00, "PM: host-to-device non-data FIS, R_ERR(p) due to collision"}, |
| {0xc01, "PM: signature register - device-to-host FISes"}, |
| {0xc02, "PM: corrupts CRC propagation of device-to-host FISes"}, |
| {0x0, NULL}, |
| }; |
| |
| static const char * find_phy_desc(int id) |
| { |
| const struct phy_event_t * pep; |
| |
| for (pep = phy_event_arr; pep->desc; ++pep) { |
| if ((id & 0xfff) == pep->id) |
| return pep->desc; |
| } |
| return NULL; |
| } |
| |
| static void dStrRaw(const char* str, int len) |
| { |
| int k; |
| |
| for (k = 0 ; k < len; ++k) |
| printf("%c", str[k]); |
| } |
| |
| int main(int argc, char * argv[]) |
| { |
| int sg_fd, c, k, j, ok, res, id, len, vendor; |
| unsigned char aptCmdBlk[SAT_ATA_PASS_THROUGH16_LEN] = |
| {SAT_ATA_PASS_THROUGH16, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0}; |
| sg_io_hdr_t io_hdr; |
| char * device_name = 0; |
| char ebuff[EBUFF_SZ]; |
| unsigned char inBuff[READ_LOG_EXT_RESPONSE_LEN]; |
| unsigned char sense_buffer[64]; |
| int hex = 0; |
| int ignore = 0; |
| int raw = 0; |
| int reset = 0; |
| int verbose = 0; |
| int extend = 0; |
| int chk_cond = 0; /* set to 1 to read register(s) back */ |
| int protocol = 4; /* PIO data-in */ |
| int t_dir = 1; /* 0 -> to device, 1 -> from device */ |
| int byte_block = 1; /* 0 -> bytes, 1 -> 512 byte blocks */ |
| int t_length = 2; /* 0 -> no data transferred, 2 -> sector count */ |
| const unsigned char * cucp; |
| int ret = 0; |
| uint64_t ull; |
| const char * cp; |
| |
| memset(inBuff, 0, sizeof(inBuff)); |
| while (1) { |
| int option_index = 0; |
| |
| c = getopt_long(argc, argv, "hHirRvV", |
| long_options, &option_index); |
| if (c == -1) |
| break; |
| |
| switch (c) { |
| case 'h': |
| usage(); |
| exit(0); |
| case 'H': |
| ++hex; |
| break; |
| case 'i': |
| ++ignore; |
| break; |
| case 'r': |
| ++raw; |
| break; |
| case 'R': |
| ++reset; |
| break; |
| case 'v': |
| ++verbose; |
| break; |
| case 'V': |
| fprintf(stderr, "version: %s\n", version_str); |
| exit(0); |
| default: |
| fprintf(stderr, "unrecognised option code %c [0x%x]\n", c, c); |
| usage(); |
| return SG_LIB_SYNTAX_ERROR; |
| } |
| } |
| if (optind < argc) { |
| if (NULL == device_name) { |
| device_name = argv[optind]; |
| ++optind; |
| } |
| if (optind < argc) { |
| for (; optind < argc; ++optind) |
| fprintf(stderr, "Unexpected extra argument: %s\n", |
| argv[optind]); |
| usage(); |
| return SG_LIB_SYNTAX_ERROR; |
| } |
| } |
| if (0 == device_name) { |
| fprintf(stderr, "no DEVICE name detected\n"); |
| usage(); |
| return SG_LIB_SYNTAX_ERROR; |
| } |
| |
| if ((sg_fd = open(device_name, O_RDWR)) < 0) { |
| snprintf(ebuff, EBUFF_SZ, |
| "sg_sat_phy_event: error opening file: %s", device_name); |
| perror(ebuff); |
| return SG_LIB_FILE_ERROR; |
| } |
| |
| /* Prepare SCSI ATA PASS-THROUGH COMMAND (16) command */ |
| if (reset > 0) |
| aptCmdBlk[4] = 1; /* features (7:0) */ |
| aptCmdBlk[6] = 1; /* sector count */ |
| aptCmdBlk[8] = SATA_PHY_EVENT_LPAGE; /* lba_low (7:0) */ |
| aptCmdBlk[14] = ATA_READ_LOG_EXT; /* command */ |
| aptCmdBlk[1] = (protocol << 1) | extend; |
| aptCmdBlk[2] = (chk_cond << 5) | (t_dir << 3) | |
| (byte_block << 2) | t_length; |
| if (verbose) { |
| fprintf(stderr, " ata pass through(16) cdb: "); |
| for (k = 0; k < SAT_ATA_PASS_THROUGH16_LEN; ++k) |
| fprintf(stderr, "%02x ", aptCmdBlk[k]); |
| fprintf(stderr, "\n"); |
| } |
| |
| memset(&io_hdr, 0, sizeof(sg_io_hdr_t)); |
| io_hdr.interface_id = 'S'; |
| io_hdr.cmd_len = sizeof(aptCmdBlk); |
| /* io_hdr.iovec_count = 0; */ /* memset takes care of this */ |
| io_hdr.mx_sb_len = sizeof(sense_buffer); |
| io_hdr.dxfer_direction = SG_DXFER_FROM_DEV; |
| io_hdr.dxfer_len = READ_LOG_EXT_RESPONSE_LEN; |
| io_hdr.dxferp = inBuff; |
| io_hdr.cmdp = aptCmdBlk; |
| io_hdr.sbp = sense_buffer; |
| io_hdr.timeout = 20000; /* 20000 millisecs == 20 seconds */ |
| /* io_hdr.flags = 0; */ /* take defaults: indirect IO, etc */ |
| /* io_hdr.pack_id = 0; */ |
| /* io_hdr.usr_ptr = NULL; */ |
| |
| if (ioctl(sg_fd, SG_IO, &io_hdr) < 0) { |
| perror("sg_sat_phy_event: SG_IO ioctl error"); |
| close(sg_fd); |
| return SG_LIB_CAT_OTHER; |
| } |
| |
| /* now for the error processing */ |
| ok = 0; |
| ret = sg_err_category3(&io_hdr); |
| switch (ret) { |
| case SG_LIB_CAT_CLEAN: |
| ok = 1; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| if (verbose) |
| sg_chk_n_print3(">>> ATA_16 command", &io_hdr, 1); |
| /* check for ATA Return Descriptor */ |
| cucp = sg_scsi_sense_desc_find(io_hdr.sbp, io_hdr.sb_len_wr, |
| SAT_ATA_RETURN_DESC); |
| if (cucp && (cucp[3])) { |
| if (cucp[3] & 0x4) { |
| fprintf(stderr, "error in returned FIS: aborted command\n"); |
| break; |
| } |
| } |
| ret = 0; |
| ok = 1; /* not sure what is happening so output response */ |
| if (0 == verbose) { |
| fprintf(stderr, ">>> Recovered error on ATA_16, may have " |
| "failed\n"); |
| fprintf(stderr, " Add '-v' for more information\n"); |
| } |
| break; |
| default: /* won't bother decoding other categories */ |
| sg_chk_n_print3("ATA_16 command error", &io_hdr, 1); |
| break; |
| } |
| |
| if (ok) { /* output result if it is available */ |
| if (raw > 0) |
| dStrRaw((const char *)inBuff, 512); |
| else { |
| if (verbose && hex) |
| fprintf(stderr, "Response to READ LOG EXT (page=11h):\n"); |
| if (1 == hex) |
| dStrHex((const char *)inBuff, 512, 0); |
| else if (hex > 1) |
| dWordHex((const unsigned short *)inBuff, 256, 0, |
| sg_is_big_endian()); |
| else { |
| printf("SATA phy event counters:\n"); |
| for (k = 4; k < 512; k += (len + 2)) { |
| id = (inBuff[k + 1] << 8) + inBuff[k]; |
| if (0 == id) |
| break; |
| len = ((id >> 12) & 0x7) * 2; |
| vendor = !!(id & 0x8000); |
| id = id & 0xfff; |
| ull = 0; |
| for (j = len - 1; j >= 0; --j) { |
| if (j < (len - 1)) |
| ull <<= 8; |
| ull |= inBuff[k + 2 + j]; |
| } |
| cp = NULL; |
| if ((0 == vendor) && (0 == ignore)) |
| cp = find_phy_desc(id); |
| if (cp) |
| printf(" %s: %" PRIu64 "\n", cp, ull); |
| else |
| printf(" id=0x%x, vendor=%d, data_len=%d, " |
| "val=%" PRIu64 "\n", id, vendor, len, ull); |
| } |
| } |
| } |
| } |
| res = close(sg_fd); |
| if (res < 0) { |
| fprintf(stderr, "close error: %s\n", safe_strerror(-res)); |
| if (0 == ret) |
| return SG_LIB_FILE_ERROR; |
| } |
| return (ret >= 0) ? ret : SG_LIB_CAT_OTHER; |
| } |