| %define kmod_name scst |
| # kversion: Kernel version as it appears under /lib/modules. |
| # The algorithm for setting the variable kversion is as follows: |
| # - If the variable kversion has been set, use its value. |
| # - Otherwise use the version number of the running kernel. |
| %{!?kversion:%define kversion %{expand:%%(uname -r)}} |
| %{echo:kversion=%{kversion} |
| } |
| # kernel_rpm: Name of the kernel RPM if the kernel is available as an RPM. |
| # krpmver: Version of the kernel RPM. Not necessarily identical to kversion. |
| %if %{expand:%%(rpm --quiet -qf /lib/modules/%{kversion}/kernel/arch 2>/dev/null; |
| echo $((1-$?)))} |
| %define kernel_rpm %{expand:%%( |
| rpm -q --qf '%%%%{name}\\n' -f \\ |
| /lib/modules/%%{kversion}/kernel/arch | uniq |
| )} |
| %define krpmver %{expand:%%( |
| rpm -q --qf '%%%%{version}-%%%%{release}\\n' -f \\ |
| /lib/modules/%%{kversion}/kernel/arch | uniq |
| )} |
| %else |
| %if %{expand:%%(rpm --quiet -q kernel-headers; echo $((1-$?)))} |
| %define kernel_rpm kernel |
| %define krpmver %{expand:%%( |
| rpm -q --qf '%%%%{BUILDTIME} %%%%{version}-%%%%{release}\\n' \\ |
| kernel-headers | sort | tail -n1 | { read a b; echo $b; } |
| )} |
| %endif |
| %endif |
| %{?kernel_rpm: |
| %{echo:kernel_rpm=%{kernel_rpm} |
| } |
| %{echo:krpmver=%{krpmver} |
| }} |
| # kernel_devel_rpm: Name of the kernel development RPM. |
| %if 0%{?kernel_rpm:1} |
| %if %([ %{kernel_rpm} = kernel-plus-core ]; echo $((1-$?))) |
| # CentOSPlus |
| %define kernel_devel_rpm kernel-plus-devel |
| %else |
| %if %([ %{kernel_rpm} = kernel-ml-core ]; echo $((1-$?))) |
| # RHEL/CentOS elrepo mainline |
| %define kernel_devel_rpm kernel-ml-devel |
| %else |
| %if %([ %{kernel_rpm} = kernel-core ]; echo $((1-$?))) |
| # Fedora |
| %define kernel_devel_rpm kernel-devel |
| %else |
| # Other Linux distros |
| %define kernel_devel_rpm %{kernel_rpm}-devel |
| %endif |
| %endif |
| %endif |
| %{echo:kernel_devel_rpm=%{kernel_devel_rpm} |
| } |
| %endif |
| # Version of the RPM that is being built. |
| %define rpm_version @rpm_version@ |
| # Make command with or without flags. |
| %define make %{expand:%%(echo ${MAKE:-make})} |
| %define pkgrel 1 |
| %define dkms_version %{rpm_version}-%{pkgrel}%{?dist} |
| |
| Name: %{kmod_name}-dkms |
| Version: %{rpm_version} |
| Release: %{pkgrel}%{?dist} |
| Summary: SCST mid-layer kernel drivers |
| Group: System/Kernel |
| License: GPLv2 |
| Vendor: http://scst.sourceforge.net/ |
| URL: http://scst.sourceforge.net/ |
| # Unfortunately the Red Hat / CentOS kernel-debug-devel RPM provides |
| # kernel-devel so a workaround is needed to match the kernel-devel RPM. |
| BuildRequires: %{?kernel_rpm:%{kernel_rpm} = %{krpmver} %{kernel_devel_rpm} = %{krpmver}} gcc make |
| |
| Source: %{kmod_name}-%{version}.tar.bz2 |
| BuildRoot: %{_tmppath}/%{name}-%{version}-build |
| AutoReqProv: no |
| |
| %description |
| A generic SCSI target subsystem for Linux that allows to convert any Linux |
| server into a sophisticated storage server. The three layers in SCST are the |
| target driver layer; the SCSI target core and the device handler layer. SCST |
| target drivers realize communication with an initiator and implement a storage |
| protocol like iSCSI, FC or SRP. SCST device handlers implement a SCSI |
| interface on top of local storage. Examples of such local storage are SCSI |
| RAID controller (dev_disk handler), block device (vdisk_blockio handler), file |
| (vdisk_fileio handler) or custom block device behavior implemented in user |
| space (scst_user). |
| |
| Authors: |
| -------- |
| Vladislav Bolkhovitin, Bart Van Assche and others |
| |
| %package devel |
| Summary: SCST mid-layer kernel driver development package |
| Group: Development/Kernel |
| BuildArch: noarch |
| |
| %description devel |
| A generic SCSI target subsystem for Linux (SCST) that allows to convert |
| any Linux server into a sophisticated storage server. SCST target drivers |
| implement protocols like iSCSI, FC or SRP. SCST device handlers either |
| provide access to a local SCSI RAID controller (dev_disk), block device |
| (vdisk_blockio), file (vdisk_fileio) or custom block device behavior |
| implemented in user space (scst_user). |
| |
| Authors: |
| -------- |
| Vladislav Bolkhovitin, Bart Van Assche and others |
| |
| %package userspace |
| Summary: SCST mid-layer user space software |
| Group: Development/Kernel |
| Requires: scst-dkms |
| |
| %description userspace |
| A generic SCSI target subsystem for Linux that allows to convert any Linux |
| server into a sophisticated storage server. The three layers in SCST are the |
| target driver layer; the SCSI target core and the device handler layer. SCST |
| target drivers realize communication with an initiator and implement a storage |
| protocol like iSCSI, FC or SRP. SCST device handlers implement a SCSI |
| interface on top of local storage. Examples of such local storage are SCSI |
| RAID controller (dev_disk handler), block device (vdisk_blockio handler), file |
| (vdisk_fileio handler) or custom block device behavior implemented in user |
| space (scst_user). |
| |
| %prep |
| |
| %setup -q -n %{kmod_name}-%{version} |
| |
| %build |
| export KVER=%{kversion} PREFIX=%{_prefix} |
| export BUILD_2X_MODULE=y CONFIG_SCSI_QLA_FC=y CONFIG_SCSI_QLA2XXX_TARGET=y |
| for d in scst fcst iscsi-scst qla2x00t/qla2x00-target scst_local srpt; do |
| %{make} -C $d |
| done |
| |
| %install |
| export KVER=%{kversion} PREFIX=%{_prefix} MANDIR=%{_mandir} DEPMOD=true |
| export BUILD_2X_MODULE=y CONFIG_SCSI_QLA_FC=y CONFIG_SCSI_QLA2XXX_TARGET=y |
| for d in scst; do |
| DESTDIR=%{buildroot} %{make} -C $d install |
| done |
| for d in fcst iscsi-scst qla2x00t/qla2x00-target scst_local srpt; do |
| DESTDIR=%{buildroot} INSTALL_MOD_PATH=%{buildroot} %{make} -C $d install |
| done |
| rm -f %{buildroot}/lib/modules/%{kversion}/[Mm]odule* |
| rm -rf %{buildroot}/lib/modules/%{kversion}/extra |
| |
| install -d -m 755 %{buildroot}/usr/src/%{kmod_name}-%{dkms_version} |
| ( |
| cd %{buildroot}/usr/src/%{kmod_name}-%{dkms_version} && |
| tar --strip-components=1 -xaf %{SOURCE0} |
| ) |
| cat >%{buildroot}/usr/src/%{kmod_name}-%{dkms_version}/dkms.conf <<"EOF" |
| PACKAGE_VERSION="%{dkms_version}" |
| PACKAGE_NAME="%{kmod_name}" |
| AUTOINSTALL=yes |
| MAKE[0]="export KVER=${kernelver} KDIR=${kernel_source_dir} BUILD_2X_MODULE=y CONFIG_SCSI_QLA_FC=y CONFIG_SCSI_QLA2XXX_TARGET=y && make 2release && make -sC scst && make -sC fcst && make -sC iscsi-scst && make -sC qla2x00t/qla2x00-target && make -sC scst_local && make -sC srpt && cp */*.ko */*/*.ko *scst*/*/*/*.ko ." |
| CLEAN="make clean" |
| # Remove any existing ib_srpt.ko kernel modules |
| PRE_INSTALL="find /lib/modules/${kernelver} -name ib_srpt.ko -exec rm {} \;" |
| BUILT_MODULE_NAME[ 0]="fcst" |
| BUILT_MODULE_NAME[ 1]="ib_srpt" |
| BUILT_MODULE_NAME[ 2]="iscsi-scst" |
| BUILT_MODULE_NAME[ 3]="qla2x00tgt" |
| BUILT_MODULE_NAME[ 4]="qla2xxx_scst" |
| BUILT_MODULE_NAME[ 5]="scst" |
| BUILT_MODULE_NAME[ 6]="scst_local" |
| BUILT_MODULE_NAME[ 7]="scst_cdrom" |
| BUILT_MODULE_NAME[ 8]="scst_changer" |
| BUILT_MODULE_NAME[ 9]="scst_disk" |
| BUILT_MODULE_NAME[10]="scst_modisk" |
| BUILT_MODULE_NAME[11]="scst_processor" |
| BUILT_MODULE_NAME[12]="scst_raid" |
| BUILT_MODULE_NAME[13]="scst_tape" |
| BUILT_MODULE_NAME[14]="scst_user" |
| BUILT_MODULE_NAME[15]="scst_vdisk" |
| BUILT_MODULE_NAME[16]="isert-scst" |
| DEST_MODULE_LOCATION[ 0]="/extra" |
| DEST_MODULE_LOCATION[ 1]="/extra" |
| DEST_MODULE_LOCATION[ 2]="/extra" |
| DEST_MODULE_LOCATION[ 3]="/extra" |
| DEST_MODULE_LOCATION[ 4]="/extra" |
| DEST_MODULE_LOCATION[ 5]="/extra" |
| DEST_MODULE_LOCATION[ 6]="/extra" |
| DEST_MODULE_LOCATION[ 7]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[ 8]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[ 9]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[10]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[11]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[12]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[13]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[14]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[15]="/extra/dev_handlers" |
| DEST_MODULE_LOCATION[16]="/extra" |
| EOF |
| |
| %clean |
| rm -rf %{buildroot} |
| |
| %pre |
| # Remove any existing ib_srpt.ko kernel modules |
| find /lib/modules/%{kversion} -name ib_srpt.ko -exec rm {} \; |
| # Remove files installed by "make install" |
| rm -f /usr/local/man/man5/iscsi-scstd.conf.5 |
| rm -f /usr/local/man/man8/iscsi-scst-adm.8 |
| rm -f /usr/local/man/man8/iscsi-scstd.8 |
| rm -f /usr/local/sbin/iscsi-scst-adm |
| rm -f /usr/local/sbin/iscsi-scstd |
| rm -rf /usr/local/include/scst |
| |
| %pre userspace |
| # Remove files installed by "make install" |
| rm -f /usr/local/man/man5/iscsi-scstd.conf.5 |
| rm -f /usr/local/man/man8/iscsi-scst-adm.8 |
| rm -f /usr/local/man/man8/iscsi-scstd.8 |
| rm -f /usr/local/sbin/iscsi-scst-adm |
| rm -f /usr/local/sbin/iscsi-scstd |
| rm -rf /usr/local/include/scst |
| |
| %post |
| dkms add -m %{kmod_name} -v %{dkms_version} --rpm_safe_upgrade |
| dkms build -m %{kmod_name} -v %{dkms_version} |
| dkms install -m %{kmod_name} -v %{dkms_version} |
| |
| %preun |
| dkms remove -m %{kmod_name} -v %{dkms_version} --rpm_safe_upgrade --all |
| true |
| |
| %files |
| %defattr(-,root,root,0755) |
| /usr/src/%{kmod_name}-%{dkms_version}/ |
| |
| %files userspace |
| %{_mandir}/man5/iscsi-scstd.conf.5.gz |
| %{_mandir}/man8/iscsi-scst-adm.8.gz |
| %{_mandir}/man8/iscsi-scstd.8.gz |
| %{_sbindir}/iscsi-scst-adm |
| %{_sbindir}/iscsi-scstd |
| %dir /var/lib/scst/dif_tags |
| %dir /var/lib/scst/pr |
| %dir /var/lib/scst/vdev_mode_pages |
| |
| %files devel |
| %defattr(-,root,root,0755) |
| %dir /usr/include/scst |
| /usr/include/scst/Module.symvers |
| /usr/include/scst/backport.h |
| /usr/include/scst/build_mode.h |
| /usr/include/scst/scst.h |
| /usr/include/scst/scst_const.h |
| /usr/include/scst/scst_debug.h |
| /usr/include/scst/scst_itf_ver.h |
| /usr/include/scst/scst_sgv.h |
| /usr/include/scst/scst_user.h |
| |
| %changelog |
| * Sun Mar 8 2020 Bart Van Assche <bvanassche@acm.org> |
| - Added support for the CentOSPlus kernel. |
| * Tue Oct 8 2019 Bart Van Assche <bvanassche@acm.org> |
| - Make this spec file compatible with rpmbuild v4.14. |
| * Wed May 6 2015 Bart Van Assche <bart.vanassche@sandisk.com> |
| - Build in release mode instead of debug mode. |
| * Mon May 4 2015 Bart Van Assche <bart.vanassche@sandisk.com> |
| - Added iSER target driver. |
| * Mon Feb 23 2015 Bart Van Assche <bart.vanassche@sandisk.com> |
| - Split spec file into a non-DKMS and a DKMS spec file. |
| * Fri Jan 16 2015 Bart Van Assche <bart.vanassche@sandisk.com> |
| - Added DKMS support. |
| * Fri Nov 22 2013 Bart Van Assche <bvanassche@acm.org> |
| - Initial spec file. |