| # This is the hex for a SAS protocol specific diagnostic |
| # page. It will attempt to put phy identifier 1 of the |
| # given device into IDLE (continuously transmit idle dwords) mode. |
| # Physical transmission speed is 3 Gbps (last number on first |
| # active line can be 8 for 1.5Gbps, 9 for 3Gbps and 10 for 6Gbps). |
| # See sdiag_sas_p1_stop.txt to turn off this test pattern. |
| # N.B. This will turn the receiver off on phy id 1. |
| # |
| # Usage example: 'sg_senddiag --pf --raw=- /dev/sg2 < {this_file}' |
| # |
| 3f,6,0,1c,1,1,12,9, |
| 0,0,0,0,0,0,0,0, |
| 0,0,0,0,0,0,0,0, |
| 0,0,0,0,0,0,0,0 |
