| #ifndef SG_LIB_H |
| #define SG_LIB_H |
| |
| /* |
| * Copyright (c) 2004-2016 Douglas Gilbert. |
| * All rights reserved. |
| * Use of this source code is governed by a BSD-style |
| * license that can be found in the BSD_LICENSE file. |
| */ |
| |
| /* |
| * |
| * On 5th October 2004 a FreeBSD license was added to this file. |
| * The intention is to keep this file and the related sg_lib.c file |
| * as open source and encourage their unencumbered use. |
| * |
| * Current version number is in the sg_lib.c file and can be accessed |
| * with the sg_lib_version() function. |
| */ |
| |
| |
| /* |
| * This header file contains defines and function declarations that may |
| * be useful to applications that communicate with devices that use a |
| * SCSI command set. These command sets have names like SPC-4, SBC-3, |
| * SSC-3, SES-2 and draft standards defining them can be found at |
| * http://www.t10.org . Virtually all devices in the Linux SCSI subsystem |
| * utilize SCSI command sets. Many devices in other Linux device subsystems |
| * utilize SCSI command sets either natively or via emulation (e.g. a |
| * parallel ATA disk in a USB enclosure). |
| */ |
| |
| #include <stdio.h> |
| #include <stdint.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* SCSI Peripheral Device Types (PDT) [5 bit field] */ |
| #define PDT_DISK 0x0 /* direct access block device (disk) */ |
| #define PDT_TAPE 0x1 /* sequential access device (magnetic tape) */ |
| #define PDT_PRINTER 0x2 /* printer device (see SSC-1) */ |
| #define PDT_PROCESSOR 0x3 /* processor device (e.g. SAFTE device) */ |
| #define PDT_WO 0x4 /* write once device (some optical disks) */ |
| #define PDT_MMC 0x5 /* CD/DVD/BD (multi-media) */ |
| #define PDT_SCANNER 0x6 /* obsolete */ |
| #define PDT_OPTICAL 0x7 /* optical memory device (some optical disks) */ |
| #define PDT_MCHANGER 0x8 /* media changer device (e.g. tape robot) */ |
| #define PDT_COMMS 0x9 /* communications device (obsolete) */ |
| #define PDT_SAC 0xc /* storage array controller device */ |
| #define PDT_SES 0xd /* SCSI Enclosure Services (SES) device */ |
| #define PDT_RBC 0xe /* Reduced Block Commands (simplified PDT_DISK) */ |
| #define PDT_OCRW 0xf /* optical card read/write device */ |
| #define PDT_BCC 0x10 /* bridge controller commands */ |
| #define PDT_OSD 0x11 /* Object Storage Device (OSD) */ |
| #define PDT_ADC 0x12 /* Automation/drive commands (ADC) */ |
| #define PDT_SMD 0x13 /* Security Manager Device (SMD) */ |
| #define PDT_ZBC 0x14 /* Zoned Block Commands (ZBC) */ |
| #define PDT_WLUN 0x1e /* Well known logical unit (WLUN) */ |
| #define PDT_UNKNOWN 0x1f /* Unknown or no device type */ |
| |
| #ifndef SAM_STAT_GOOD |
| /* The SCSI status codes as found in SAM-4 at www.t10.org */ |
| #define SAM_STAT_GOOD 0x0 |
| #define SAM_STAT_CHECK_CONDITION 0x2 |
| #define SAM_STAT_CONDITION_MET 0x4 |
| #define SAM_STAT_BUSY 0x8 |
| #define SAM_STAT_INTERMEDIATE 0x10 /* obsolete in SAM-4 */ |
| #define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14 /* obsolete in SAM-4 */ |
| #define SAM_STAT_RESERVATION_CONFLICT 0x18 |
| #define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */ |
| #define SAM_STAT_TASK_SET_FULL 0x28 |
| #define SAM_STAT_ACA_ACTIVE 0x30 |
| #define SAM_STAT_TASK_ABORTED 0x40 |
| #endif |
| |
| /* The SCSI sense key codes as found in SPC-4 at www.t10.org */ |
| #define SPC_SK_NO_SENSE 0x0 |
| #define SPC_SK_RECOVERED_ERROR 0x1 |
| #define SPC_SK_NOT_READY 0x2 |
| #define SPC_SK_MEDIUM_ERROR 0x3 |
| #define SPC_SK_HARDWARE_ERROR 0x4 |
| #define SPC_SK_ILLEGAL_REQUEST 0x5 |
| #define SPC_SK_UNIT_ATTENTION 0x6 |
| #define SPC_SK_DATA_PROTECT 0x7 |
| #define SPC_SK_BLANK_CHECK 0x8 |
| #define SPC_SK_VENDOR_SPECIFIC 0x9 |
| #define SPC_SK_COPY_ABORTED 0xa |
| #define SPC_SK_ABORTED_COMMAND 0xb |
| #define SPC_SK_RESERVED 0xc |
| #define SPC_SK_VOLUME_OVERFLOW 0xd |
| #define SPC_SK_MISCOMPARE 0xe |
| #define SPC_SK_COMPLETED 0xf |
| |
| /* Transport protocol identifiers or just Protocol identifiers */ |
| #define TPROTO_FCP 0 |
| #define TPROTO_SPI 1 |
| #define TPROTO_SSA 2 |
| #define TPROTO_1394 3 |
| #define TPROTO_SRP 4 |
| #define TPROTO_ISCSI 5 |
| #define TPROTO_SAS 6 |
| #define TPROTO_ADT 7 |
| #define TPROTO_ATA 8 |
| #define TPROTO_UAS 9 /* USB attached SCSI */ |
| #define TPROTO_SOP 0xa /* SCSI over PCIe */ |
| #define TPROTO_PCIE 0xb /* includes NVMe */ |
| #define TPROTO_NONE 0xf |
| |
| |
| /* The format of the version string is like this: "1.87 20130731" */ |
| const char * sg_lib_version(); |
| |
| /* Returns length of SCSI command given the opcode (first byte). |
| * Yields the wrong answer for variable length commands (opcode=0x7f) |
| * and potentially some vendor specific commands. */ |
| int sg_get_command_size(unsigned char cdb_byte0); |
| |
| /* Command name given pointer to the cdb. Certain command names |
| * depend on peripheral type (give 0 if unknown). Places command |
| * name into buff and will write no more than buff_len bytes. */ |
| void sg_get_command_name(const unsigned char * cdbp, int peri_type, |
| int buff_len, char * buff); |
| |
| /* Command name given only the first byte (byte 0) of a cdb and |
| * peripheral type. */ |
| void sg_get_opcode_name(unsigned char cdb_byte0, int peri_type, int buff_len, |
| char * buff); |
| |
| /* Command name given opcode (byte 0), service action and peripheral type. |
| * If no service action give 0, if unknown peripheral type give 0. */ |
| void sg_get_opcode_sa_name(unsigned char cdb_byte0, int service_action, |
| int peri_type, int buff_len, char * buff); |
| |
| /* Fetch scsi status string. */ |
| void sg_get_scsi_status_str(int scsi_status, int buff_len, char * buff); |
| |
| /* This is a slightly stretched SCSI sense "descriptor" format header. |
| * The addition is to allow the 0x70 and 0x71 response codes. The idea |
| * is to place the salient data of both "fixed" and "descriptor" sense |
| * format into one structure to ease application processing. |
| * The original sense buffer should be kept around for those cases |
| * in which more information is required (e.g. the LBA of a MEDIUM ERROR). */ |
| struct sg_scsi_sense_hdr { |
| unsigned char response_code; /* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */ |
| unsigned char sense_key; |
| unsigned char asc; |
| unsigned char ascq; |
| unsigned char byte4; |
| unsigned char byte5; |
| unsigned char byte6; |
| unsigned char additional_length; |
| }; |
| |
| /* Maps the salient data from a sense buffer which is in either fixed or |
| * descriptor format into a structure mimicking a descriptor format |
| * header (i.e. the first 8 bytes of sense descriptor format). |
| * If zero response code returns 0. Otherwise returns 1 and if 'sshp' is |
| * non-NULL then zero all fields and then set the appropriate fields in |
| * that structure. sshp::additional_length is always 0 for response |
| * codes 0x70 and 0x71 (fixed format). */ |
| int sg_scsi_normalize_sense(const unsigned char * sensep, int sense_len, |
| struct sg_scsi_sense_hdr * sshp); |
| |
| /* Attempt to find the first SCSI sense data descriptor that matches the |
| * given 'desc_type'. If found return pointer to start of sense data |
| * descriptor; otherwise (including fixed format sense data) returns NULL. */ |
| const unsigned char * sg_scsi_sense_desc_find(const unsigned char * sensep, |
| int sense_len, int desc_type); |
| |
| /* Get sense key from sense buffer. If successful returns a sense key value |
| * between 0 and 15. If sense buffer cannot be decode, returns -1 . */ |
| int sg_get_sense_key(const unsigned char * sensep, int sense_len); |
| |
| /* Yield string associated with sense_key value. Returns 'buff'. */ |
| char * sg_get_sense_key_str(int sense_key, int buff_len, char * buff); |
| |
| /* Yield string associated with ASC/ASCQ values. Returns 'buff'. */ |
| char * sg_get_asc_ascq_str(int asc, int ascq, int buff_len, char * buff); |
| |
| /* Returns 1 if valid bit set, 0 if valid bit clear. Irrespective the |
| * information field is written out via 'info_outp' (except when it is |
| * NULL). Handles both fixed and descriptor sense formats. */ |
| int sg_get_sense_info_fld(const unsigned char * sensep, int sb_len, |
| uint64_t * info_outp); |
| |
| /* Returns 1 if any of the 3 bits (i.e. FILEMARK, EOM or ILI) are set. |
| * In descriptor format if the stream commands descriptor not found |
| * then returns 0. Writes 1 or 0 corresponding to these bits to the |
| * last three arguments if they are non-NULL. */ |
| int sg_get_sense_filemark_eom_ili(const unsigned char * sensep, int sb_len, |
| int * filemark_p, int * eom_p, int * ili_p); |
| |
| /* Returns 1 if SKSV is set and sense key is NO_SENSE or NOT_READY. Also |
| * returns 1 if progress indication sense data descriptor found. Places |
| * progress field from sense data where progress_outp points. If progress |
| * field is not available returns 0. Handles both fixed and descriptor |
| * sense formats. N.B. App should multiply by 100 and divide by 65536 |
| * to get percentage completion from given value. */ |
| int sg_get_sense_progress_fld(const unsigned char * sensep, int sb_len, |
| int * progress_outp); |
| |
| /* Closely related to sg_print_sense(). Puts decoded sense data in 'buff'. |
| * Usually multiline with multiple '\n' including one trailing. If |
| * 'raw_sinfo' set appends sense buffer in hex. 'leadin' is string prepended |
| * to each line written to 'buff', NULL treated as "". Returns the number of |
| * bytes written to 'buff' excluding the trailing '\0'. |
| * N.B. prior to sg3_utils v 1.42 'leadin' was only prepended to the first |
| * line output. Also this function returned type void. */ |
| int sg_get_sense_str(const char * leadin, const unsigned char * sense_buffer, |
| int sb_len, int raw_sinfo, int buff_len, char * buff); |
| |
| /* Decode descriptor format sense descriptors (assumes sense buffer is |
| * in descriptor format). 'leadin' is string prepended to each line written |
| * to 'b', NULL treated as "". Returns the number of bytes written to 'b' |
| * excluding the trailing '\0'. */ |
| int sg_get_sense_descriptors_str(const char * leadin, |
| const unsigned char * sense_buffer, |
| int sb_len, int blen, char * b); |
| |
| /* Decodes a designation descriptor (e.g. as found in the Device |
| * Identification VPD page (0x83)) into string 'b' whose maximum length is |
| * blen. 'leadin' is string prepended to each line written to 'b', NULL |
| * treated as "". Returns the number of bytes written to 'b' excluding the |
| * trailing '\0'. */ |
| int sg_get_designation_descriptor_str(const char * leadin, |
| const unsigned char * ddp, int dd_len, |
| int print_assoc, int do_long, int blen, |
| char * b); |
| |
| /* Yield string associated with peripheral device type (pdt). Returns |
| * 'buff'. If 'pdt' out of range yields "bad pdt" string. */ |
| char * sg_get_pdt_str(int pdt, int buff_len, char * buff); |
| |
| /* Some lesser used PDTs share a lot in common with a more used PDT. |
| * Examples are PDT_ADC decaying to PDT_TAPE and PDT_ZBC to PDT_DISK. |
| * If such a lesser used 'pdt' is given to this function, then it will |
| * return the more used PDT (i.e. "decays to"); otherwise 'pdt' is returned. |
| * Valid for 'pdt' 0 to 31, for other values returns 'pdt'. */ |
| int sg_lib_pdt_decay(int pdt); |
| |
| /* Yield string associated with transport protocol identifier (tpi). Returns |
| * 'buff'. If 'tpi' out of range yields "bad tpi" string. */ |
| char * sg_get_trans_proto_str(int tpi, int buff_len, char * buff); |
| |
| /* Returns a designator's type string given 'val' (0 to 15 inclusive), |
| * otherwise returns NULL. */ |
| const char * sg_get_desig_type_str(int val); |
| |
| /* Returns a designator's code_set string given 'val' (0 to 15 inclusive), |
| * otherwise returns NULL. */ |
| const char * sg_get_desig_code_set_str(int val); |
| |
| /* Returns a designator's association string given 'val' (0 to 3 inclusive), |
| * otherwise returns NULL. */ |
| const char * sg_get_desig_assoc_str(int val); |
| |
| extern FILE * sg_warnings_strm; |
| |
| void sg_set_warnings_strm(FILE * warnings_strm); |
| |
| /* The following "print" functions send ACSII to 'sg_warnings_strm' file |
| * descriptor (default value is stderr). 'leadin' is string prepended to |
| * each line printed out, NULL treated as "". */ |
| void sg_print_command(const unsigned char * command); |
| void sg_print_scsi_status(int scsi_status); |
| |
| /* 'leadin' is string prepended to each line printed out, NULL treated as |
| * "". N.B. prior to sg3_utils v 1.42 'leadin' was only prepended to the |
| * first line printed. */ |
| void sg_print_sense(const char * leadin, const unsigned char * sense_buffer, |
| int sb_len, int raw_info); |
| |
| /* Utilities can use these exit status values for syntax errors and |
| * file (device node) problems (e.g. not found or permissions). */ |
| #define SG_LIB_SYNTAX_ERROR 1 /* command line syntax problem */ |
| #define SG_LIB_FILE_ERROR 15 /* device or other file problem */ |
| |
| /* The sg_err_category_sense() function returns one of the following. |
| * These may be used as exit status values (from a process). Notice that |
| * some of the lower values correspond to SCSI sense key values. */ |
| #define SG_LIB_CAT_CLEAN 0 /* No errors or other information */ |
| /* Value 1 left unused for utilities to use SG_LIB_SYNTAX_ERROR */ |
| #define SG_LIB_CAT_NOT_READY 2 /* sense key, unit stopped? */ |
| /* [sk,asc,ascq: 0x2,*,*] */ |
| #define SG_LIB_CAT_MEDIUM_HARD 3 /* medium or hardware error, blank check */ |
| /* [sk,asc,ascq: 0x3/0x4/0x8,*,*] */ |
| #define SG_LIB_CAT_ILLEGAL_REQ 5 /* Illegal request (other than invalid */ |
| /* opcode): [sk,asc,ascq: 0x5,*,*] */ |
| #define SG_LIB_CAT_UNIT_ATTENTION 6 /* sense key, device state changed */ |
| /* [sk,asc,ascq: 0x6,*,*] */ |
| /* was SG_LIB_CAT_MEDIA_CHANGED earlier [sk,asc,ascq: 0x6,0x28,*] */ |
| #define SG_LIB_CAT_DATA_PROTECT 7 /* sense key, media write protected? */ |
| /* [sk,asc,ascq: 0x7,*,*] */ |
| #define SG_LIB_CAT_INVALID_OP 9 /* (Illegal request,) Invalid opcode: */ |
| /* [sk,asc,ascq: 0x5,0x20,0x0] */ |
| #define SG_LIB_CAT_COPY_ABORTED 10 /* sense key, some data transferred */ |
| /* [sk,asc,ascq: 0xa,*,*] */ |
| #define SG_LIB_CAT_ABORTED_COMMAND 11 /* interpreted from sense buffer */ |
| /* [sk,asc,ascq: 0xb,! 0x10,*] */ |
| #define SG_LIB_CAT_MISCOMPARE 14 /* sense key, probably verify */ |
| /* [sk,asc,ascq: 0xe,*,*] */ |
| #define SG_LIB_CAT_NO_SENSE 20 /* sense data with key of "no sense" */ |
| /* [sk,asc,ascq: 0x0,*,*] */ |
| #define SG_LIB_CAT_RECOVERED 21 /* Successful command after recovered err */ |
| /* [sk,asc,ascq: 0x1,*,*] */ |
| #define SG_LIB_CAT_RES_CONFLICT SAM_STAT_RESERVATION_CONFLICT |
| /* 24: this is a SCSI status, not sense. */ |
| /* It indicates reservation by another */ |
| /* machine blocks this command */ |
| #define SG_LIB_CAT_CONDITION_MET 25 /* SCSI status, not sense key. */ |
| /* Only from PRE-FETCH (SBC-4) */ |
| #define SG_LIB_CAT_BUSY 26 /* SCSI status, not sense. Invites retry */ |
| #define SG_LIB_CAT_TS_FULL 27 /* SCSI status, not sense. Wait then retry */ |
| #define SG_LIB_CAT_ACA_ACTIVE 28 /* SCSI status; ACA seldom used */ |
| #define SG_LIB_CAT_TASK_ABORTED 29 /* SCSI status, this command aborted by? */ |
| #define SG_LIB_CAT_PROTECTION 40 /* subset of aborted command (for PI, DIF) */ |
| /* [sk,asc,ascq: 0xb,0x10,*] */ |
| #define SG_LIB_CAT_MALFORMED 97 /* Response to SCSI command malformed */ |
| #define SG_LIB_CAT_SENSE 98 /* Something else is in the sense buffer */ |
| #define SG_LIB_CAT_OTHER 99 /* Some other error/warning has occurred */ |
| /* (e.g. a transport or driver error) */ |
| |
| /* Returns a SG_LIB_CAT_* value. If cannot decode sense_buffer or a less |
| * common sense key then return SG_LIB_CAT_SENSE .*/ |
| int sg_err_category_sense(const unsigned char * sense_buffer, int sb_len); |
| |
| /* Here are some additional sense data categories that are not returned |
| * by sg_err_category_sense() but are returned by some related functions. */ |
| #define SG_LIB_CAT_ILLEGAL_REQ_WITH_INFO 17 /* Illegal request (other than */ |
| /* invalid opcode) plus 'info' field: */ |
| /* [sk,asc,ascq: 0x5,*,*] */ |
| #define SG_LIB_CAT_MEDIUM_HARD_WITH_INFO 18 /* medium or hardware error */ |
| /* sense key plus 'info' field: */ |
| /* [sk,asc,ascq: 0x3/0x4,*,*] */ |
| #define SG_LIB_CAT_PROTECTION_WITH_INFO 41 /* aborted command sense key, */ |
| /* protection plus 'info' field: */ |
| /* [sk,asc,ascq: 0xb,0x10,*] */ |
| #define SG_LIB_CAT_TIMEOUT 33 |
| |
| /* Yield string associated with sense category. Returns 'buff' (or pointer |
| * to "Bad sense category" if 'buff' is NULL). If sense_cat unknown then |
| * yield "Sense category: <sense_cat>" string. */ |
| const char * sg_get_category_sense_str(int sense_cat, int buff_len, |
| char * buff, int verbose); |
| |
| |
| /* Iterates to next designation descriptor in the device identification |
| * VPD page. The 'initial_desig_desc' should point to start of first |
| * descriptor with 'page_len' being the number of valid bytes in that |
| * and following descriptors. To start, 'off' should point to a negative |
| * value, thereafter it should point to the value yielded by the previous |
| * call. If 0 returned then 'initial_desig_desc + *off' should be a valid |
| * descriptor; returns -1 if normal end condition and -2 for an abnormal |
| * termination. Matches association, designator_type and/or code_set when |
| * any of those values are greater than or equal to zero. */ |
| int sg_vpd_dev_id_iter(const unsigned char * initial_desig_desc, int page_len, |
| int * off, int m_assoc, int m_desig_type, |
| int m_code_set); |
| |
| |
| /* <<< General purpose (i.e. not SCSI specific) utility functions >>> */ |
| |
| /* Always returns valid string even if errnum is wild (or library problem). |
| * If errnum is negative, flip its sign. */ |
| char * safe_strerror(int errnum); |
| |
| |
| /* Print (to stdout) 'str' of bytes in hex, 16 bytes per line optionally |
| * followed at the right hand side of the line with an ASCII interpretation. |
| * Each line is prefixed with an address, starting at 0 for str[0]..str[15]. |
| * All output numbers are in hex. 'no_ascii' allows for 3 output types: |
| * > 0 each line has address then up to 16 ASCII-hex bytes |
| * = 0 in addition, the bytes are listed in ASCII to the right |
| * < 0 only the ASCII-hex bytes are listed (i.e. without address) |
| */ |
| void dStrHex(const char* str, int len, int no_ascii); |
| |
| /* Print (to sg_warnings_strm (stderr)) 'str' of bytes in hex, 16 bytes per |
| * line optionally followed at right by its ASCII interpretation. Same |
| * logic as dStrHex() with different output stream (i.e. stderr). */ |
| void dStrHexErr(const char* str, int len, int no_ascii); |
| |
| /* Read 'len' bytes from 'str' and output as ASCII-Hex bytes (space |
| * separated) to 'b' not to exceed 'b_len' characters. Each line |
| * starts with 'leadin' (NULL for no leadin) and there are 16 bytes |
| * per line with an extra space between the 8th and 9th bytes. 'format' |
| * is unused, set to 0 . Returns number of bytes written to 'b' excluding |
| * the trailing '\0'.*/ |
| int dStrHexStr(const char* str, int len, const char * leadin, int format, |
| int b_len, char * b); |
| |
| /* Returns 1 when executed on big endian machine; else returns 0. |
| * Useful for displaying ATA identify words (which need swapping on a |
| * big endian machine). |
| */ |
| int sg_is_big_endian(); |
| |
| /* Extract character sequence from ATA words as in the model string |
| * in a IDENTIFY DEVICE response. Returns number of characters |
| * written to 'ochars' before 0 character is found or 'num' words |
| * are processed. */ |
| int sg_ata_get_chars(const unsigned short * word_arr, int start_word, |
| int num_words, int is_big_endian, char * ochars); |
| |
| /* Print (to stdout) 16 bit 'words' in hex, 8 words per line optionally |
| * followed at the right hand side of the line with an ASCII interpretation |
| * (pairs of ASCII characters in big endian order (upper first)). |
| * Each line is prefixed with an address, starting at 0. |
| * All output numbers are in hex. 'no_ascii' allows for 3 output types: |
| * > 0 each line has address then up to 8 ASCII-hex words |
| * = 0 in addition, the words are listed in ASCII pairs to the right |
| * = -1 only the ASCII-hex words are listed (i.e. without address) |
| * = -2 only the ASCII-hex words, formatted for "hdparm --Istdin" |
| * < -2 same as -1 |
| * If 'swapb' non-zero then bytes in each word swapped. Needs to be set |
| * for ATA IDENTIFY DEVICE response on big-endian machines. |
| */ |
| void dWordHex(const unsigned short* words, int num, int no_ascii, int swapb); |
| |
| /* If the number in 'buf' can not be decoded or the multiplier is unknown |
| * then -1 is returned. Accepts a hex prefix (0x or 0X) or a 'h' (or 'H') |
| * suffix. Otherwise a decimal multiplier suffix may be given. Recognised |
| * multipliers: c C *1; w W *2; b B *512; k K KiB *1,024; |
| * KB *1,000; m M MiB *1,048,576; MB *1,000,000; g G GiB *1,073,741,824; |
| * GB *1,000,000,000 and <n>x<m> which multiplies <n> by <m> . Ignore leading |
| * spaces and tabs; accept comma, space, tab and hash as terminator. */ |
| int sg_get_num(const char * buf); |
| |
| /* If the number in 'buf' can not be decoded then -1 is returned. Accepts a |
| * hex prefix (0x or 0X) or a 'h' (or 'H') suffix; otherwise decimal is |
| * assumed. Does not accept multipliers. Accept a comma (","), a whitespace |
| * or newline as terminator. */ |
| int sg_get_num_nomult(const char * buf); |
| |
| /* If the number in 'buf' can not be decoded or the multiplier is unknown |
| * then -1LL is returned. Accepts a hex prefix (0x or 0X) or a 'h' (or 'H') |
| * suffix. Otherwise a decimal multiplier suffix may be given. In addition |
| * to supporting the multipliers of sg_get_num(), this function supports: |
| * t T TiB *(2**40); TB *(10**12); p P PiB *(2**50); PB *(10**15) . |
| * Ignore leading spaces and tabs; accept comma, space, tab and hash as |
| * terminator. */ |
| int64_t sg_get_llnum(const char * buf); |
| |
| |
| /* <<< Architectural support functions [is there a better place?] >>> */ |
| |
| /* Non Unix OSes distinguish between text and binary files. |
| * Set text mode on fd. Does nothing in Unix. Returns negative number on |
| * failure. */ |
| int sg_set_text_mode(int fd); |
| |
| /* Set binary mode on fd. Does nothing in Unix. Returns negative number on |
| * failure. */ |
| int sg_set_binary_mode(int fd); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif |
