| /* |
| * Copyright (c) 1999-2016 Douglas Gilbert. |
| * All rights reserved. |
| * Use of this source code is governed by a BSD-style |
| * license that can be found in the BSD_LICENSE file. |
| */ |
| |
| /* |
| * CONTENTS |
| * Some SCSI commands are executed in many contexts and hence began |
| * to appear in several sg3_utils utilities. This files centralizes |
| * some of the low level command execution code. In most cases the |
| * interpretation of the command response is left to the each |
| * utility. |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <stdarg.h> |
| #include <string.h> |
| #include <unistd.h> |
| #include "sg_lib.h" |
| #include "sg_cmds_basic.h" |
| #include "sg_pt.h" |
| #include "sg_unaligned.h" |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| |
| /* Needs to be after config.h */ |
| #ifdef SG_LIB_LINUX |
| #include <errno.h> |
| #endif |
| |
| |
| static const char * version_str = "1.72 20160126"; |
| |
| |
| #define SENSE_BUFF_LEN 64 /* Arbitrary, could be larger */ |
| #define EBUFF_SZ 256 |
| |
| #define DEF_PT_TIMEOUT 60 /* 60 seconds */ |
| #define START_PT_TIMEOUT 120 /* 120 seconds == 2 minutes */ |
| #define LONG_PT_TIMEOUT 7200 /* 7,200 seconds == 120 minutes */ |
| |
| #define INQUIRY_CMD 0x12 |
| #define INQUIRY_CMDLEN 6 |
| #define REQUEST_SENSE_CMD 0x3 |
| #define REQUEST_SENSE_CMDLEN 6 |
| #define REPORT_LUNS_CMD 0xa0 |
| #define REPORT_LUNS_CMDLEN 12 |
| #define TUR_CMD 0x0 |
| #define TUR_CMDLEN 6 |
| |
| #define SAFE_STD_INQ_RESP_LEN 36 /* other lengths lock up some devices */ |
| |
| |
| const char * |
| sg_cmds_version() |
| { |
| return version_str; |
| } |
| |
| #ifdef __GNUC__ |
| static int pr2ws(const char * fmt, ...) |
| __attribute__ ((format (printf, 1, 2))); |
| #else |
| static int pr2ws(const char * fmt, ...); |
| #endif |
| |
| |
| static int |
| pr2ws(const char * fmt, ...) |
| { |
| va_list args; |
| int n; |
| |
| va_start(args, fmt); |
| n = vfprintf(sg_warnings_strm ? sg_warnings_strm : stderr, fmt, args); |
| va_end(args); |
| return n; |
| } |
| |
| /* Returns file descriptor >= 0 if successful. If error in Unix returns |
| negated errno. */ |
| int |
| sg_cmds_open_device(const char * device_name, int read_only, int verbose) |
| { |
| /* The following 2 lines are temporary. It is to avoid a NULL pointer |
| * crash when an old utility is used with a newer library built after |
| * the sg_warnings_strm cleanup */ |
| if (NULL == sg_warnings_strm) |
| sg_warnings_strm = stderr; |
| |
| return scsi_pt_open_device(device_name, read_only, verbose); |
| } |
| |
| /* Returns file descriptor >= 0 if successful. If error in Unix returns |
| negated errno. */ |
| int |
| sg_cmds_open_flags(const char * device_name, int flags, int verbose) |
| { |
| return scsi_pt_open_flags(device_name, flags, verbose); |
| } |
| |
| /* Returns 0 if successful. If error in Unix returns negated errno. */ |
| int |
| sg_cmds_close_device(int device_fd) |
| { |
| return scsi_pt_close_device(device_fd); |
| } |
| |
| static int |
| sg_cmds_process_helper(const char * leadin, int mx_di_len, int resid, |
| const unsigned char * sbp, int slen, int noisy, |
| int verbose, int * o_sense_cat) |
| { |
| int scat, got; |
| int n = 0; |
| int check_data_in = 0; |
| char b[512]; |
| |
| scat = sg_err_category_sense(sbp, slen); |
| switch (scat) { |
| case SG_LIB_CAT_NOT_READY: |
| case SG_LIB_CAT_INVALID_OP: |
| case SG_LIB_CAT_ILLEGAL_REQ: |
| case SG_LIB_CAT_ABORTED_COMMAND: |
| case SG_LIB_CAT_COPY_ABORTED: |
| case SG_LIB_CAT_DATA_PROTECT: |
| case SG_LIB_CAT_PROTECTION: |
| case SG_LIB_CAT_NO_SENSE: |
| case SG_LIB_CAT_MISCOMPARE: |
| n = 0; |
| break; |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_MEDIUM_HARD: |
| ++check_data_in; |
| /* drop through */ |
| case SG_LIB_CAT_UNIT_ATTENTION: |
| case SG_LIB_CAT_SENSE: |
| default: |
| n = noisy; |
| break; |
| } |
| if (verbose || n) { |
| if (leadin && (strlen(leadin) > 0)) |
| pr2ws("%s:\n", leadin); |
| sg_get_sense_str(NULL, sbp, slen, (verbose > 1), |
| sizeof(b), b); |
| pr2ws("%s", b); |
| if ((mx_di_len > 0) && (resid > 0)) { |
| got = mx_di_len - resid; |
| if ((verbose > 2) || check_data_in || (got > 0)) |
| pr2ws(" pass-through requested %d bytes (data-in) but " |
| "got %d bytes\n", mx_di_len, got); |
| } |
| } |
| if (o_sense_cat) |
| *o_sense_cat = scat; |
| return -2; |
| } |
| |
| /* This is a helper function used by sg_cmds_* implementations after the |
| * call to the pass-through. pt_res is returned from do_scsi_pt(). If valid |
| * sense data is found it is decoded and output to sg_warnings_strm (def: |
| * stderr); depending on the 'noisy' and 'verbose' settings. Returns -2 for |
| * "sense" category (may not be fatal), -1 for failed, 0, or a positive |
| * number. If 'mx_di_len > 0' then asks pass-through for resid and returns |
| * (mx_di_len - resid); otherwise returns 0. So for data-in it should return |
| * the actual number of bytes received. For data-out (to device) or no data |
| * call with 'mx_di_len' set to 0 or less. If -2 returned then sense category |
| * output via 'o_sense_cat' pointer (if not NULL). Note that several sense |
| * categories also have data in bytes received; -2 is still returned. */ |
| int |
| sg_cmds_process_resp(struct sg_pt_base * ptvp, const char * leadin, |
| int pt_res, int mx_di_len, const unsigned char * sbp, |
| int noisy, int verbose, int * o_sense_cat) |
| { |
| int got, cat, duration, slen, resid, resp_code, sstat, transport_sense; |
| char b[1024]; |
| |
| if (NULL == leadin) |
| leadin = ""; |
| if (pt_res < 0) { |
| #ifdef SG_LIB_LINUX |
| if (verbose) |
| pr2ws("%s: pass through os error: %s\n", leadin, |
| safe_strerror(-pt_res)); |
| if ((-ENXIO == pt_res) && o_sense_cat) { |
| if (verbose > 2) |
| pr2ws("map ENXIO to SG_LIB_CAT_NOT_READY\n"); |
| *o_sense_cat = SG_LIB_CAT_NOT_READY; |
| return -2; |
| } else if (noisy && (0 == verbose)) |
| pr2ws("%s: pass through os error: %s\n", leadin, |
| safe_strerror(-pt_res)); |
| #else |
| if (noisy || verbose) |
| pr2ws("%s: pass through os error: %s\n", leadin, |
| safe_strerror(-pt_res)); |
| #endif |
| return -1; |
| } else if (SCSI_PT_DO_BAD_PARAMS == pt_res) { |
| pr2ws("%s: bad pass through setup\n", leadin); |
| return -1; |
| } else if (SCSI_PT_DO_TIMEOUT == pt_res) { |
| pr2ws("%s: pass through timeout\n", leadin); |
| return -1; |
| } |
| if ((verbose > 2) && ((duration = get_scsi_pt_duration_ms(ptvp)) >= 0)) |
| pr2ws(" duration=%d ms\n", duration); |
| resid = (mx_di_len > 0) ? get_scsi_pt_resid(ptvp) : 0; |
| slen = get_scsi_pt_sense_len(ptvp); |
| switch ((cat = get_scsi_pt_result_category(ptvp))) { |
| case SCSI_PT_RESULT_GOOD: |
| if (sbp && (slen > 7)) { |
| resp_code = sbp[0] & 0x7f; |
| /* SBC referrals can have status=GOOD and sense_key=COMPLETED */ |
| if (resp_code >= 0x70) { |
| if (resp_code < 0x72) { |
| if (SPC_SK_NO_SENSE != (0xf & sbp[2])) |
| sg_err_category_sense(sbp, slen); |
| } else if (resp_code < 0x74) { |
| if (SPC_SK_NO_SENSE != (0xf & sbp[1])) |
| sg_err_category_sense(sbp, slen); |
| } |
| } |
| } |
| if (mx_di_len > 0) { |
| got = mx_di_len - resid; |
| if ((verbose > 1) && (resid != 0)) |
| pr2ws(" %s: pass-through requested %d bytes (data-in) " |
| "but got %d bytes\n", leadin, mx_di_len, got); |
| if (got >= 0) |
| return got; |
| else { |
| if (verbose) |
| pr2ws(" %s: pass-through can't get negative bytes, " |
| "say it got none\n", leadin); |
| return 0; |
| } |
| } else |
| return 0; |
| case SCSI_PT_RESULT_STATUS: /* other than GOOD and CHECK CONDITION */ |
| sstat = get_scsi_pt_status_response(ptvp); |
| if (o_sense_cat) { |
| switch (sstat) { |
| case SAM_STAT_RESERVATION_CONFLICT: |
| *o_sense_cat = SG_LIB_CAT_RES_CONFLICT; |
| return -2; |
| case SAM_STAT_CONDITION_MET: |
| *o_sense_cat = SG_LIB_CAT_CONDITION_MET; |
| return -2; |
| case SAM_STAT_BUSY: |
| *o_sense_cat = SG_LIB_CAT_BUSY; |
| return -2; |
| case SAM_STAT_TASK_SET_FULL: |
| *o_sense_cat = SG_LIB_CAT_TS_FULL; |
| return -2; |
| case SAM_STAT_ACA_ACTIVE: |
| *o_sense_cat = SG_LIB_CAT_ACA_ACTIVE; |
| return -2; |
| case SAM_STAT_TASK_ABORTED: |
| *o_sense_cat = SG_LIB_CAT_TASK_ABORTED; |
| return -2; |
| default: |
| break; |
| } |
| } |
| if (verbose || noisy) { |
| sg_get_scsi_status_str(sstat, sizeof(b), b); |
| pr2ws("%s: scsi status: %s\n", leadin, b); |
| } |
| return -1; |
| case SCSI_PT_RESULT_SENSE: |
| return sg_cmds_process_helper(leadin, mx_di_len, resid, sbp, slen, |
| noisy, verbose, o_sense_cat); |
| case SCSI_PT_RESULT_TRANSPORT_ERR: |
| if (verbose || noisy) { |
| get_scsi_pt_transport_err_str(ptvp, sizeof(b), b); |
| pr2ws("%s: transport: %s\n", leadin, b); |
| } |
| #ifdef SG_LIB_LINUX |
| transport_sense = (slen > 0); |
| #else |
| transport_sense = ((SAM_STAT_CHECK_CONDITION == |
| get_scsi_pt_status_response(ptvp)) && (slen > 0)); |
| #endif |
| if (transport_sense) |
| return sg_cmds_process_helper(leadin, mx_di_len, resid, sbp, |
| slen, noisy, verbose, o_sense_cat); |
| else |
| return -1; |
| case SCSI_PT_RESULT_OS_ERR: |
| if (verbose || noisy) { |
| get_scsi_pt_os_err_str(ptvp, sizeof(b), b); |
| pr2ws("%s: os: %s\n", leadin, b); |
| } |
| return -1; |
| default: |
| pr2ws("%s: unknown pass through result category (%d)\n", leadin, cat); |
| return -1; |
| } |
| } |
| |
| /* Invokes a SCSI INQUIRY command and yields the response. Returns 0 when |
| * successful, various SG_LIB_CAT_* positive values or -1 -> other errors */ |
| int |
| sg_ll_inquiry(int sg_fd, int cmddt, int evpd, int pg_op, void * resp, |
| int mx_resp_len, int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat, resid; |
| unsigned char inqCmdBlk[INQUIRY_CMDLEN] = {INQUIRY_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| unsigned char * up; |
| struct sg_pt_base * ptvp; |
| |
| if (cmddt) |
| inqCmdBlk[1] |= 2; |
| if (evpd) |
| inqCmdBlk[1] |= 1; |
| inqCmdBlk[2] = (unsigned char)pg_op; |
| /* 16 bit allocation length (was 8) is a recent SPC-3 addition */ |
| sg_put_unaligned_be16((uint16_t)mx_resp_len, inqCmdBlk + 3); |
| if (verbose) { |
| pr2ws(" inquiry cdb: "); |
| for (k = 0; k < INQUIRY_CMDLEN; ++k) |
| pr2ws("%02x ", inqCmdBlk[k]); |
| pr2ws("\n"); |
| } |
| if (resp && (mx_resp_len > 0)) { |
| up = (unsigned char *)resp; |
| up[0] = 0x7f; /* defensive prefill */ |
| if (mx_resp_len > 4) |
| up[4] = 0; |
| } |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| pr2ws("inquiry: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, inqCmdBlk, sizeof(inqCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "inquiry", res, mx_resp_len, sense_b, |
| noisy, verbose, &sense_cat); |
| resid = get_scsi_pt_resid(ptvp); |
| destruct_scsi_pt_obj(ptvp); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = sense_cat; |
| break; |
| } |
| } else if (ret < 4) { |
| if (verbose) |
| pr2ws("inquiry: got too few bytes (%d)\n", ret); |
| ret = SG_LIB_CAT_MALFORMED; |
| } else |
| ret = 0; |
| |
| if (resid > 0) { |
| if (resid > mx_resp_len) { |
| pr2ws("inquiry: resid (%d) should never exceed requested " |
| "len=%d\n", resid, mx_resp_len); |
| return ret ? ret : SG_LIB_CAT_MALFORMED; |
| } |
| /* zero unfilled section of response buffer */ |
| memset((unsigned char *)resp + (mx_resp_len - resid), 0, resid); |
| } |
| return ret; |
| } |
| |
| /* Yields most of first 36 bytes of a standard INQUIRY (evpd==0) response. |
| * Returns 0 when successful, various SG_LIB_CAT_* positive values or |
| * -1 -> other errors */ |
| int |
| sg_simple_inquiry(int sg_fd, struct sg_simple_inquiry_resp * inq_data, |
| int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char inqCmdBlk[INQUIRY_CMDLEN] = {INQUIRY_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| unsigned char inq_resp[SAFE_STD_INQ_RESP_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (inq_data) { |
| memset(inq_data, 0, sizeof(* inq_data)); |
| inq_data->peripheral_qualifier = 0x3; |
| inq_data->peripheral_type = 0x1f; |
| } |
| inqCmdBlk[4] = (unsigned char)sizeof(inq_resp); |
| if (verbose) { |
| pr2ws(" inquiry cdb: "); |
| for (k = 0; k < INQUIRY_CMDLEN; ++k) |
| pr2ws("%02x ", inqCmdBlk[k]); |
| pr2ws("\n"); |
| } |
| memset(inq_resp, 0, sizeof(inq_resp)); |
| inq_resp[0] = 0x7f; /* defensive prefill */ |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| pr2ws("inquiry: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, inqCmdBlk, sizeof(inqCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, inq_resp, sizeof(inq_resp)); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "inquiry", res, sizeof(inq_resp), |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = sense_cat; |
| break; |
| } |
| } else if (ret < 4) { |
| if (verbose) |
| pr2ws("inquiry: got too few bytes (%d)\n", ret); |
| ret = SG_LIB_CAT_MALFORMED; |
| } else |
| ret = 0; |
| |
| if (inq_data && (0 == ret)) { |
| inq_data->peripheral_qualifier = (inq_resp[0] >> 5) & 0x7; |
| inq_data->peripheral_type = inq_resp[0] & 0x1f; |
| inq_data->byte_1 = inq_resp[1]; |
| inq_data->version = inq_resp[2]; |
| inq_data->byte_3 = inq_resp[3]; |
| inq_data->byte_5 = inq_resp[5]; |
| inq_data->byte_6 = inq_resp[6]; |
| inq_data->byte_7 = inq_resp[7]; |
| memcpy(inq_data->vendor, inq_resp + 8, 8); |
| memcpy(inq_data->product, inq_resp + 16, 16); |
| memcpy(inq_data->revision, inq_resp + 32, 4); |
| } |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI TEST UNIT READY command. |
| * 'pack_id' is just for diagnostics, safe to set to 0. |
| * Looks for progress indicator if 'progress' non-NULL; |
| * if found writes value [0..65535] else write -1. |
| * Returns 0 when successful, various SG_LIB_CAT_* positive values or |
| * -1 -> other errors */ |
| int |
| sg_ll_test_unit_ready_progress(int sg_fd, int pack_id, int * progress, |
| int noisy, int verbose) |
| { |
| int res, ret, k, sense_cat; |
| unsigned char turCmdBlk[TUR_CMDLEN] = {TUR_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (verbose) { |
| pr2ws(" test unit ready cdb: "); |
| for (k = 0; k < TUR_CMDLEN; ++k) |
| pr2ws("%02x ", turCmdBlk[k]); |
| pr2ws("\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| pr2ws("test unit ready: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, turCmdBlk, sizeof(turCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_packet_id(ptvp, pack_id); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "test unit ready", res, 0, sense_b, |
| noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| if (progress) { |
| int slen = get_scsi_pt_sense_len(ptvp); |
| |
| if (! sg_get_sense_progress_fld(sense_b, slen, progress)) |
| *progress = -1; |
| } |
| switch (sense_cat) { |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = sense_cat; |
| break; |
| } |
| } else |
| ret = 0; |
| |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI TEST UNIT READY command. |
| * 'pack_id' is just for diagnostics, safe to set to 0. |
| * Returns 0 when successful, various SG_LIB_CAT_* positive values or |
| * -1 -> other errors */ |
| int |
| sg_ll_test_unit_ready(int sg_fd, int pack_id, int noisy, int verbose) |
| { |
| return sg_ll_test_unit_ready_progress(sg_fd, pack_id, NULL, noisy, |
| verbose); |
| } |
| |
| /* Invokes a SCSI REQUEST SENSE command. Returns 0 when successful, various |
| * SG_LIB_CAT_* positive values or -1 -> other errors */ |
| int |
| sg_ll_request_sense(int sg_fd, int desc, void * resp, int mx_resp_len, |
| int noisy, int verbose) |
| { |
| int k, ret, res, sense_cat; |
| unsigned char rsCmdBlk[REQUEST_SENSE_CMDLEN] = |
| {REQUEST_SENSE_CMD, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| if (desc) |
| rsCmdBlk[1] |= 0x1; |
| if (mx_resp_len > 0xff) { |
| pr2ws("mx_resp_len cannot exceed 255\n"); |
| return -1; |
| } |
| rsCmdBlk[4] = mx_resp_len & 0xff; |
| if (verbose) { |
| pr2ws(" Request Sense cmd: "); |
| for (k = 0; k < REQUEST_SENSE_CMDLEN; ++k) |
| pr2ws("%02x ", rsCmdBlk[k]); |
| pr2ws("\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| pr2ws("request sense: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, rsCmdBlk, sizeof(rsCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "request sense", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = sense_cat; |
| break; |
| } |
| } else { |
| if ((mx_resp_len >= 8) && (ret < 8)) { |
| if (verbose) |
| pr2ws(" request sense: got %d bytes in response, too " |
| "short\n", ret); |
| ret = -1; |
| } else |
| ret = 0; |
| } |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
| |
| /* Invokes a SCSI REPORT LUNS command. Return of 0 -> success, |
| * various SG_LIB_CAT_* positive values or -1 -> other errors */ |
| int |
| sg_ll_report_luns(int sg_fd, int select_report, void * resp, int mx_resp_len, |
| int noisy, int verbose) |
| { |
| int k, ret, res, sense_cat; |
| unsigned char rlCmdBlk[REPORT_LUNS_CMDLEN] = |
| {REPORT_LUNS_CMD, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char sense_b[SENSE_BUFF_LEN]; |
| struct sg_pt_base * ptvp; |
| |
| rlCmdBlk[2] = select_report & 0xff; |
| sg_put_unaligned_be32((uint32_t)mx_resp_len, rlCmdBlk + 6); |
| if (verbose) { |
| pr2ws(" report luns cdb: "); |
| for (k = 0; k < REPORT_LUNS_CMDLEN; ++k) |
| pr2ws("%02x ", rlCmdBlk[k]); |
| pr2ws("\n"); |
| } |
| |
| ptvp = construct_scsi_pt_obj(); |
| if (NULL == ptvp) { |
| pr2ws("report luns: out of memory\n"); |
| return -1; |
| } |
| set_scsi_pt_cdb(ptvp, rlCmdBlk, sizeof(rlCmdBlk)); |
| set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b)); |
| set_scsi_pt_data_in(ptvp, (unsigned char *)resp, mx_resp_len); |
| res = do_scsi_pt(ptvp, sg_fd, DEF_PT_TIMEOUT, verbose); |
| ret = sg_cmds_process_resp(ptvp, "report luns", res, mx_resp_len, |
| sense_b, noisy, verbose, &sense_cat); |
| if (-1 == ret) |
| ; |
| else if (-2 == ret) { |
| switch (sense_cat) { |
| case SG_LIB_CAT_RECOVERED: |
| case SG_LIB_CAT_NO_SENSE: |
| ret = 0; |
| break; |
| default: |
| ret = sense_cat; |
| break; |
| } |
| } else |
| ret = 0; |
| destruct_scsi_pt_obj(ptvp); |
| return ret; |
| } |
