| /* |
| * Copyright (c) 2006-2016 Douglas Gilbert. |
| * All rights reserved. |
| * Use of this source code is governed by a BSD-style |
| * license that can be found in the BSD_LICENSE file. |
| */ |
| |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <getopt.h> |
| #define __STDC_FORMAT_MACROS 1 |
| #include <inttypes.h> |
| |
| #ifdef HAVE_CONFIG_H |
| #include "config.h" |
| #endif |
| #include "sg_lib.h" |
| #include "sg_cmds_basic.h" |
| #include "sg_cmds_extra.h" |
| #include "sg_pr2serr.h" |
| |
| /* This program uses a ATA PASS-THROUGH SCSI command to package an |
| * ATA IDENTIFY (PACKAGE) DEVICE command. It is based on the SCSI to |
| * ATA Translation (SAT) drafts and standards. See http://www.t10.org |
| * for drafts. SAT is a standard: SAT ANSI INCITS 431-2007 (draft prior |
| * to that is sat-r09.pdf). SAT-2 is also a standard: SAT-2 ANSI INCITS |
| * 465-2010 and the draft prior to that is sat2r09.pdf . The SAT-3 |
| * project has started and the most recent draft is sat3r01.pdf . |
| */ |
| |
| #define SAT_ATA_PASS_THROUGH16 0x85 |
| #define SAT_ATA_PASS_THROUGH16_LEN 16 |
| #define SAT_ATA_PASS_THROUGH12 0xa1 /* clashes with MMC BLANK comand */ |
| #define SAT_ATA_PASS_THROUGH12_LEN 12 |
| #define SAT_ATA_RETURN_DESC 9 /* ATA Return (sense) Descriptor */ |
| #define ASCQ_ATA_PT_INFO_AVAILABLE 0x1d |
| |
| #define ATA_IDENTIFY_DEVICE 0xec |
| #define ATA_IDENTIFY_PACKET_DEVICE 0xa1 |
| #define ID_RESPONSE_LEN 512 |
| |
| #define DEF_TIMEOUT 20 |
| |
| #define EBUFF_SZ 256 |
| |
| static const char * version_str = "1.12 20160126"; |
| |
| static struct option long_options[] = { |
| {"ck_cond", no_argument, 0, 'c'}, |
| {"extend", no_argument, 0, 'e'}, |
| {"help", no_argument, 0, 'h'}, |
| {"hex", no_argument, 0, 'H'}, |
| {"len", required_argument, 0, 'l'}, |
| {"ident", no_argument, 0, 'i'}, |
| {"packet", no_argument, 0, 'p'}, |
| {"raw", no_argument, 0, 'r'}, |
| {"readonly", no_argument, 0, 'R'}, |
| {"verbose", no_argument, 0, 'v'}, |
| {"version", no_argument, 0, 'V'}, |
| {0, 0, 0, 0}, |
| }; |
| |
| static void usage() |
| { |
| pr2serr("Usage: sg_sat_identify [--ck_cond] [--extend] [--help] [--hex] " |
| "[--ident]\n" |
| " [--len=16|12] [--packet] [--raw] " |
| "[--readonly]\n" |
| " [--verbose] [--version] DEVICE\n" |
| " where:\n" |
| " --ck_cond|-c sets ck_cond bit in cdb (def: 0)\n" |
| " --extend|-e sets extend bit in cdb (def: 0)\n" |
| " --help|-h print out usage message then exit\n" |
| " --hex|-H output response in hex\n" |
| " --ident|-i output WWN prefixed by 0x, if not " |
| "available output\n" |
| " 0x0000000000000000\n" |
| " --len=16|12 | -l 16|12 cdb length: 16 or 12 bytes " |
| "(default: 16)\n" |
| " --packet|-p do IDENTIFY PACKET DEVICE (def: IDENTIFY " |
| "DEVICE) command\n" |
| " --raw|-r output response in binary to stdout\n" |
| " --readonly|-R open DEVICE read-only (def: read-write)\n" |
| " --verbose|-v increase verbosity\n" |
| " --version|-V print version string and exit\n\n" |
| "Performs a ATA IDENTIFY (PACKET) DEVICE command via a SAT " |
| "layer\n"); |
| } |
| |
| static void dStrRaw(const char* str, int len) |
| { |
| int k; |
| |
| for (k = 0 ; k < len; ++k) |
| printf("%c", str[k]); |
| } |
| |
| static int do_identify_dev(int sg_fd, int do_packet, int cdb_len, |
| int ck_cond, int extend, int do_indent, |
| int do_hex, int do_raw, int verbose) |
| { |
| int ok, j, res, ret; |
| /* Following for ATA READ/WRITE MULTIPLE (EXT) cmds, normally 0 */ |
| int multiple_count = 0; |
| int protocol = 4; /* PIO data-in */ |
| int t_type = 0; /* 0 -> 512 byte blocks, 1 -> device's LB size */ |
| int t_dir = 1; /* 0 -> to device, 1 -> from device */ |
| int byte_block = 1; /* 0 -> bytes, 1 -> 512 byte blocks (if t_type=0) */ |
| int t_length = 2; /* 0 -> no data transferred, 2 -> sector count */ |
| int resid = 0; |
| int got_ard = 0; /* got ATA result descriptor */ |
| int got_fixsense = 0; /* got ATA result in fixed format sense */ |
| int sb_sz; |
| struct sg_scsi_sense_hdr ssh; |
| unsigned char inBuff[ID_RESPONSE_LEN]; |
| unsigned char sense_buffer[64]; |
| unsigned char ata_return_desc[16]; |
| unsigned char aptCmdBlk[SAT_ATA_PASS_THROUGH16_LEN] = |
| {SAT_ATA_PASS_THROUGH16, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0}; |
| unsigned char apt12CmdBlk[SAT_ATA_PASS_THROUGH12_LEN] = |
| {SAT_ATA_PASS_THROUGH12, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0}; |
| const unsigned short * usp; |
| uint64_t ull; |
| |
| sb_sz = sizeof(sense_buffer); |
| memset(sense_buffer, 0, sb_sz); |
| memset(ata_return_desc, 0, sizeof(ata_return_desc)); |
| ok = 0; |
| if (SAT_ATA_PASS_THROUGH16_LEN == cdb_len) { |
| /* Prepare ATA PASS-THROUGH COMMAND (16) command */ |
| aptCmdBlk[6] = 1; /* sector count */ |
| aptCmdBlk[14] = (do_packet ? ATA_IDENTIFY_PACKET_DEVICE : |
| ATA_IDENTIFY_DEVICE); |
| aptCmdBlk[1] = (multiple_count << 5) | (protocol << 1) | extend; |
| aptCmdBlk[2] = (ck_cond << 5) | (t_type << 4) | (t_dir << 3) | |
| (byte_block << 2) | t_length; |
| res = sg_ll_ata_pt(sg_fd, aptCmdBlk, cdb_len, DEF_TIMEOUT, inBuff, |
| NULL /* doutp */, ID_RESPONSE_LEN, sense_buffer, |
| sb_sz, ata_return_desc, |
| sizeof(ata_return_desc), &resid, verbose); |
| } else { |
| /* Prepare ATA PASS-THROUGH COMMAND (12) command */ |
| apt12CmdBlk[4] = 1; /* sector count */ |
| apt12CmdBlk[9] = (do_packet ? ATA_IDENTIFY_PACKET_DEVICE : |
| ATA_IDENTIFY_DEVICE); |
| apt12CmdBlk[1] = (multiple_count << 5) | (protocol << 1); |
| apt12CmdBlk[2] = (ck_cond << 5) | (t_type << 4) | (t_dir << 3) | |
| (byte_block << 2) | t_length; |
| res = sg_ll_ata_pt(sg_fd, apt12CmdBlk, cdb_len, DEF_TIMEOUT, inBuff, |
| NULL /* doutp */, ID_RESPONSE_LEN, sense_buffer, |
| sb_sz, ata_return_desc, |
| sizeof(ata_return_desc), &resid, verbose); |
| } |
| if (0 == res) { |
| ok = 1; |
| if (verbose > 2) |
| pr2serr("command completed with SCSI GOOD status\n"); |
| } else if ((res > 0) && (res & SAM_STAT_CHECK_CONDITION)) { |
| if (verbose > 1) { |
| pr2serr("ATA pass through:\n"); |
| sg_print_sense(NULL, sense_buffer, sb_sz, |
| ((verbose > 2) ? 1 : 0)); |
| } |
| if (sg_scsi_normalize_sense(sense_buffer, sb_sz, &ssh)) { |
| switch (ssh.sense_key) { |
| case SPC_SK_ILLEGAL_REQUEST: |
| if ((0x20 == ssh.asc) && (0x0 == ssh.ascq)) { |
| ret = SG_LIB_CAT_INVALID_OP; |
| if (verbose < 2) |
| pr2serr("ATA PASS-THROUGH (%d) not supported\n", |
| cdb_len); |
| } else { |
| ret = SG_LIB_CAT_ILLEGAL_REQ; |
| if (verbose < 2) |
| pr2serr("ATA PASS-THROUGH (%d), bad field in cdb\n", |
| cdb_len); |
| } |
| return ret; |
| case SPC_SK_NO_SENSE: |
| case SPC_SK_RECOVERED_ERROR: |
| if ((0x0 == ssh.asc) && |
| (ASCQ_ATA_PT_INFO_AVAILABLE == ssh.ascq)) { |
| if (0x72 == ssh.response_code) { |
| if (SAT_ATA_RETURN_DESC != ata_return_desc[0]) { |
| if (verbose) |
| pr2serr("did not find ATA Return (sense) " |
| "Descriptor\n"); |
| return SG_LIB_CAT_RECOVERED; |
| } |
| got_ard = 1; |
| break; |
| } else if (0x70 == ssh.response_code) { |
| got_fixsense = 1; |
| break; |
| } else { |
| if (verbose < 2) |
| pr2serr("ATA PASS-THROUGH (%d), unexpected " |
| "response_code=0x%x\n", ssh.response_code, |
| cdb_len); |
| return SG_LIB_CAT_RECOVERED; |
| } |
| } else if (SPC_SK_RECOVERED_ERROR == ssh.sense_key) |
| return SG_LIB_CAT_RECOVERED; |
| else { |
| if ((0x0 == ssh.asc) && (0x0 == ssh.ascq)) |
| break; |
| return SG_LIB_CAT_SENSE; |
| } |
| case SPC_SK_UNIT_ATTENTION: |
| if (verbose < 2) |
| pr2serr("ATA PASS-THROUGH (%d), Unit Attention detected\n", |
| cdb_len); |
| return SG_LIB_CAT_UNIT_ATTENTION; |
| case SPC_SK_NOT_READY: |
| if (verbose < 2) |
| pr2serr("ATA PASS-THROUGH (%d), device not ready\n", |
| cdb_len); |
| return SG_LIB_CAT_NOT_READY; |
| case SPC_SK_MEDIUM_ERROR: |
| case SPC_SK_HARDWARE_ERROR: |
| if (verbose < 2) |
| pr2serr("ATA PASS-THROUGH (%d), medium or hardware " |
| "error\n", cdb_len); |
| return SG_LIB_CAT_MEDIUM_HARD; |
| case SPC_SK_ABORTED_COMMAND: |
| if (0x10 == ssh.asc) { |
| pr2serr("Aborted command: protection information\n"); |
| return SG_LIB_CAT_PROTECTION; |
| } else { |
| pr2serr("Aborted command: try again with%s '-p' option\n", |
| (do_packet ? "out" : "")); |
| return SG_LIB_CAT_ABORTED_COMMAND; |
| } |
| case SPC_SK_DATA_PROTECT: |
| pr2serr("ATA PASS-THROUGH (%d): data protect, read only " |
| "media?\n", cdb_len); |
| return SG_LIB_CAT_DATA_PROTECT; |
| default: |
| if (verbose < 2) |
| pr2serr("ATA PASS-THROUGH (%d), some sense data, use " |
| "'-v' for more information\n", cdb_len); |
| return SG_LIB_CAT_SENSE; |
| } |
| } else { |
| pr2serr("CHECK CONDITION without response code ??\n"); |
| return SG_LIB_CAT_SENSE; |
| } |
| if (0x72 != (sense_buffer[0] & 0x7f)) { |
| pr2serr("expected descriptor sense format, response code=0x%x\n", |
| sense_buffer[0]); |
| return SG_LIB_CAT_MALFORMED; |
| } |
| } else if (res > 0) { |
| if (SAM_STAT_RESERVATION_CONFLICT == res) { |
| pr2serr("SCSI status: RESERVATION CONFLICT\n"); |
| return SG_LIB_CAT_RES_CONFLICT; |
| } else { |
| pr2serr("Unexpected SCSI status=0x%x\n", res); |
| return SG_LIB_CAT_MALFORMED; |
| } |
| } else { |
| pr2serr("ATA pass through (%d) failed\n", cdb_len); |
| if (verbose < 2) |
| pr2serr(" try adding '-v' for more information\n"); |
| return -1; |
| } |
| |
| if ((SAT_ATA_RETURN_DESC == ata_return_desc[0]) && (0 == got_ard)) |
| pr2serr("Seem to have got ATA Result Descriptor but it was not " |
| "indicated\n"); |
| if (got_ard) { |
| if (ata_return_desc[3] & 0x4) { |
| pr2serr("error indication in returned FIS: aborted command\n"); |
| pr2serr(" try again with%s '-p' option\n", |
| (do_packet ? "out" : "")); |
| return SG_LIB_CAT_ABORTED_COMMAND; |
| } |
| ok = 1; |
| } |
| if (got_fixsense) { |
| if (0x4 & sense_buffer[3]) { /* Error is MSB of Info field */ |
| pr2serr("error indication in returned FIS: aborted command\n"); |
| pr2serr(" try again with%s '-p' option\n", |
| (do_packet ? "out" : "")); |
| return SG_LIB_CAT_ABORTED_COMMAND; |
| } |
| ok = 1; |
| } |
| |
| if (ok) { /* output result if it is available */ |
| if (do_raw) |
| dStrRaw((const char *)inBuff, 512); |
| else if (0 == do_hex) { |
| if (do_indent) { |
| usp = (const unsigned short *)inBuff; |
| ull = 0; |
| for (j = 0; j < 4; ++j) { |
| if (j > 0) |
| ull <<= 16; |
| ull |= usp[108 + j]; |
| } |
| printf("0x%016" PRIx64 "\n", ull); |
| } else { |
| printf("Response for IDENTIFY %sDEVICE ATA command:\n", |
| (do_packet ? "PACKET " : "")); |
| dWordHex((const unsigned short *)inBuff, 256, 0, |
| sg_is_big_endian()); |
| } |
| } else if (1 == do_hex) |
| dStrHex((const char *)inBuff, 512, 0); |
| else if (2 == do_hex) |
| dWordHex((const unsigned short *)inBuff, 256, 0, |
| sg_is_big_endian()); |
| else if (3 == do_hex) /* '-HHH' suitable for "hdparm --Istdin" */ |
| dWordHex((const unsigned short *)inBuff, 256, -2, |
| sg_is_big_endian()); |
| else /* '-HHHH' hex bytes only */ |
| dStrHex((const char *)inBuff, 512, -1); |
| } |
| return 0; |
| } |
| |
| int main(int argc, char * argv[]) |
| { |
| int sg_fd, c, res; |
| const char * device_name = NULL; |
| int cdb_len = SAT_ATA_PASS_THROUGH16_LEN; |
| int do_packet = 0; |
| int do_hex = 0; |
| int do_indent = 0; |
| int do_raw = 0; |
| int o_readonly = 0; |
| int verbose = 0; |
| int ck_cond = 0; /* set to 1 to read register(s) back */ |
| int extend = 0; /* set to 1 to send 48 bit LBA with command */ |
| int ret = 0; |
| |
| while (1) { |
| int option_index = 0; |
| |
| c = getopt_long(argc, argv, "cehHil:prRvV", long_options, |
| &option_index); |
| if (c == -1) |
| break; |
| |
| switch (c) { |
| case 'c': |
| ++ck_cond; |
| break; |
| case 'e': |
| ++extend; |
| break; |
| case 'h': |
| case '?': |
| usage(); |
| return 0; |
| case 'H': |
| ++do_hex; |
| break; |
| case 'i': |
| ++do_indent; |
| break; |
| case 'l': |
| cdb_len = sg_get_num(optarg); |
| if (! ((cdb_len == 12) || (cdb_len == 16))) { |
| pr2serr("argument to '--len' should be 12 or 16\n"); |
| return SG_LIB_SYNTAX_ERROR; |
| } |
| break; |
| case 'p': |
| ++do_packet; |
| break; |
| case 'r': |
| ++do_raw; |
| break; |
| case 'R': |
| ++o_readonly; |
| break; |
| case 'v': |
| ++verbose; |
| break; |
| case 'V': |
| pr2serr("version: %s\n", version_str); |
| return 0; |
| default: |
| pr2serr("unrecognised option code 0x%x ??\n", c); |
| usage(); |
| return SG_LIB_SYNTAX_ERROR; |
| } |
| } |
| if (optind < argc) { |
| if (NULL == device_name) { |
| device_name = argv[optind]; |
| ++optind; |
| } |
| if (optind < argc) { |
| for (; optind < argc; ++optind) |
| pr2serr("Unexpected extra argument: %s\n", argv[optind]); |
| usage(); |
| return SG_LIB_SYNTAX_ERROR; |
| } |
| } |
| |
| if (NULL == device_name) { |
| pr2serr("missing device name!\n"); |
| usage(); |
| return 1; |
| } |
| if (do_raw) { |
| if (sg_set_binary_mode(STDOUT_FILENO) < 0) { |
| perror("sg_set_binary_mode"); |
| return SG_LIB_FILE_ERROR; |
| } |
| } |
| |
| if ((sg_fd = sg_cmds_open_device(device_name, o_readonly, verbose)) < 0) { |
| pr2serr("error opening file: %s: %s\n", device_name, |
| safe_strerror(-sg_fd)); |
| return SG_LIB_FILE_ERROR; |
| } |
| |
| ret = do_identify_dev(sg_fd, do_packet, cdb_len, ck_cond, extend, |
| do_indent, do_hex, do_raw, verbose); |
| |
| res = sg_cmds_close_device(sg_fd); |
| if (res < 0) { |
| pr2serr("close error: %s\n", safe_strerror(-res)); |
| if (0 == ret) |
| return SG_LIB_FILE_ERROR; |
| } |
| return (ret >= 0) ? ret : SG_LIB_CAT_OTHER; |
| } |