| /* |
| * Implementation of the Skein hash function. |
| * Source code author: Doug Whiting, 2008. |
| * This algorithm and source code is released to the public domain. |
| */ |
| /* Copyright 2013 Doug Whiting. This code is released to the public domain. */ |
| |
| #define SKEIN_PORT_CODE /* instantiate any code in skein_port.h */ |
| |
| #include <sys/sysmacros.h> |
| #include <sys/types.h> |
| #include <sys/skein.h> /* get the Skein API definitions */ |
| #include "skein_impl.h" /* get internal definitions */ |
| |
| /* External function to process blkCnt (nonzero) full block(s) of data. */ |
| void Skein_256_Process_Block(Skein_256_Ctxt_t *ctx, const uint8_t *blkPtr, |
| size_t blkCnt, size_t byteCntAdd); |
| void Skein_512_Process_Block(Skein_512_Ctxt_t *ctx, const uint8_t *blkPtr, |
| size_t blkCnt, size_t byteCntAdd); |
| void Skein1024_Process_Block(Skein1024_Ctxt_t *ctx, const uint8_t *blkPtr, |
| size_t blkCnt, size_t byteCntAdd); |
| |
| /* 256-bit Skein */ |
| /* init the context for a straight hashing operation */ |
| int |
| Skein_256_Init(Skein_256_Ctxt_t *ctx, size_t hashBitLen) |
| { |
| union { |
| uint8_t b[SKEIN_256_STATE_BYTES]; |
| uint64_t w[SKEIN_256_STATE_WORDS]; |
| } cfg; /* config block */ |
| |
| Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN); |
| ctx->h.hashBitLen = hashBitLen; /* output hash bit count */ |
| |
| switch (hashBitLen) { /* use pre-computed values, where available */ |
| #ifndef SKEIN_NO_PRECOMP |
| case 256: |
| bcopy(SKEIN_256_IV_256, ctx->X, sizeof (ctx->X)); |
| break; |
| case 224: |
| bcopy(SKEIN_256_IV_224, ctx->X, sizeof (ctx->X)); |
| break; |
| case 160: |
| bcopy(SKEIN_256_IV_160, ctx->X, sizeof (ctx->X)); |
| break; |
| case 128: |
| bcopy(SKEIN_256_IV_128, ctx->X, sizeof (ctx->X)); |
| break; |
| #endif |
| default: |
| /* here if there is no precomputed IV value available */ |
| /* |
| * build/process the config block, type == CONFIG (could be |
| * precomputed) |
| */ |
| /* set tweaks: T0=0; T1=CFG | FINAL */ |
| Skein_Start_New_Type(ctx, CFG_FINAL); |
| |
| /* set the schema, version */ |
| cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); |
| /* hash result length in bits */ |
| cfg.w[1] = Skein_Swap64(hashBitLen); |
| cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL); |
| /* zero pad config block */ |
| bzero(&cfg.w[3], sizeof (cfg) - 3 * sizeof (cfg.w[0])); |
| |
| /* compute the initial chaining values from config block */ |
| /* zero the chaining variables */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| Skein_256_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN); |
| break; |
| } |
| /* |
| * The chaining vars ctx->X are now initialized for the given |
| * hashBitLen. |
| * Set up to process the data message portion of the hash (default) |
| */ |
| Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */ |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* init the context for a MAC and/or tree hash operation */ |
| /* |
| * [identical to Skein_256_Init() when keyBytes == 0 && |
| * treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] |
| */ |
| int |
| Skein_256_InitExt(Skein_256_Ctxt_t *ctx, size_t hashBitLen, uint64_t treeInfo, |
| const uint8_t *key, size_t keyBytes) |
| { |
| union { |
| uint8_t b[SKEIN_256_STATE_BYTES]; |
| uint64_t w[SKEIN_256_STATE_WORDS]; |
| } cfg; /* config block */ |
| |
| Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN); |
| Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL); |
| |
| /* compute the initial chaining values ctx->X[], based on key */ |
| if (keyBytes == 0) { /* is there a key? */ |
| /* no key: use all zeroes as key for config block */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| } else { /* here to pre-process a key */ |
| |
| Skein_assert(sizeof (cfg.b) >= sizeof (ctx->X)); |
| /* do a mini-Init right here */ |
| /* set output hash bit count = state size */ |
| ctx->h.hashBitLen = 8 * sizeof (ctx->X); |
| /* set tweaks: T0 = 0; T1 = KEY type */ |
| Skein_Start_New_Type(ctx, KEY); |
| /* zero the initial chaining variables */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| /* hash the key */ |
| (void) Skein_256_Update(ctx, key, keyBytes); |
| /* put result into cfg.b[] */ |
| (void) Skein_256_Final_Pad(ctx, cfg.b); |
| /* copy over into ctx->X[] */ |
| bcopy(cfg.b, ctx->X, sizeof (cfg.b)); |
| #if SKEIN_NEED_SWAP |
| { |
| uint_t i; |
| /* convert key bytes to context words */ |
| for (i = 0; i < SKEIN_256_STATE_WORDS; i++) |
| ctx->X[i] = Skein_Swap64(ctx->X[i]); |
| } |
| #endif |
| } |
| /* |
| * build/process the config block, type == CONFIG (could be |
| * precomputed for each key) |
| */ |
| ctx->h.hashBitLen = hashBitLen; /* output hash bit count */ |
| Skein_Start_New_Type(ctx, CFG_FINAL); |
| |
| bzero(&cfg.w, sizeof (cfg.w)); /* pre-pad cfg.w[] with zeroes */ |
| cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); |
| cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */ |
| /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */ |
| cfg.w[2] = Skein_Swap64(treeInfo); |
| |
| Skein_Show_Key(256, &ctx->h, key, keyBytes); |
| |
| /* compute the initial chaining values from config block */ |
| Skein_256_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN); |
| |
| /* The chaining vars ctx->X are now initialized */ |
| /* Set up to process the data message portion of the hash (default) */ |
| ctx->h.bCnt = 0; /* buffer b[] starts out empty */ |
| Skein_Start_New_Type(ctx, MSG); |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* process the input bytes */ |
| int |
| Skein_256_Update(Skein_256_Ctxt_t *ctx, const uint8_t *msg, size_t msgByteCnt) |
| { |
| size_t n; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); |
| |
| /* process full blocks, if any */ |
| if (msgByteCnt + ctx->h.bCnt > SKEIN_256_BLOCK_BYTES) { |
| /* finish up any buffered message data */ |
| if (ctx->h.bCnt) { |
| /* # bytes free in buffer b[] */ |
| n = SKEIN_256_BLOCK_BYTES - ctx->h.bCnt; |
| if (n) { |
| /* check on our logic here */ |
| Skein_assert(n < msgByteCnt); |
| bcopy(msg, &ctx->b[ctx->h.bCnt], n); |
| msgByteCnt -= n; |
| msg += n; |
| ctx->h.bCnt += n; |
| } |
| Skein_assert(ctx->h.bCnt == SKEIN_256_BLOCK_BYTES); |
| Skein_256_Process_Block(ctx, ctx->b, 1, |
| SKEIN_256_BLOCK_BYTES); |
| ctx->h.bCnt = 0; |
| } |
| /* |
| * now process any remaining full blocks, directly from input |
| * message data |
| */ |
| if (msgByteCnt > SKEIN_256_BLOCK_BYTES) { |
| /* number of full blocks to process */ |
| n = (msgByteCnt - 1) / SKEIN_256_BLOCK_BYTES; |
| Skein_256_Process_Block(ctx, msg, n, |
| SKEIN_256_BLOCK_BYTES); |
| msgByteCnt -= n * SKEIN_256_BLOCK_BYTES; |
| msg += n * SKEIN_256_BLOCK_BYTES; |
| } |
| Skein_assert(ctx->h.bCnt == 0); |
| } |
| |
| /* copy any remaining source message data bytes into b[] */ |
| if (msgByteCnt) { |
| Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES); |
| bcopy(msg, &ctx->b[ctx->h.bCnt], msgByteCnt); |
| ctx->h.bCnt += msgByteCnt; |
| } |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* finalize the hash computation and output the result */ |
| int |
| Skein_256_Final(Skein_256_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| size_t i, n, byteCnt; |
| uint64_t X[SKEIN_256_STATE_WORDS]; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); |
| |
| ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */ |
| /* zero pad b[] if necessary */ |
| if (ctx->h.bCnt < SKEIN_256_BLOCK_BYTES) |
| bzero(&ctx->b[ctx->h.bCnt], |
| SKEIN_256_BLOCK_BYTES - ctx->h.bCnt); |
| |
| /* process the final block */ |
| Skein_256_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); |
| |
| /* now output the result */ |
| /* total number of output bytes */ |
| byteCnt = (ctx->h.hashBitLen + 7) >> 3; |
| |
| /* run Threefish in "counter mode" to generate output */ |
| /* zero out b[], so it can hold the counter */ |
| bzero(ctx->b, sizeof (ctx->b)); |
| /* keep a local copy of counter mode "key" */ |
| bcopy(ctx->X, X, sizeof (X)); |
| for (i = 0; i * SKEIN_256_BLOCK_BYTES < byteCnt; i++) { |
| /* build the counter block */ |
| uint64_t tmp = Skein_Swap64((uint64_t)i); |
| bcopy(&tmp, ctx->b, sizeof (tmp)); |
| Skein_Start_New_Type(ctx, OUT_FINAL); |
| /* run "counter mode" */ |
| Skein_256_Process_Block(ctx, ctx->b, 1, sizeof (uint64_t)); |
| /* number of output bytes left to go */ |
| n = byteCnt - i * SKEIN_256_BLOCK_BYTES; |
| if (n >= SKEIN_256_BLOCK_BYTES) |
| n = SKEIN_256_BLOCK_BYTES; |
| Skein_Put64_LSB_First(hashVal + i * SKEIN_256_BLOCK_BYTES, |
| ctx->X, n); /* "output" the ctr mode bytes */ |
| Skein_Show_Final(256, &ctx->h, n, |
| hashVal + i * SKEIN_256_BLOCK_BYTES); |
| /* restore the counter mode key for next time */ |
| bcopy(X, ctx->X, sizeof (X)); |
| } |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* 512-bit Skein */ |
| |
| /* init the context for a straight hashing operation */ |
| int |
| Skein_512_Init(Skein_512_Ctxt_t *ctx, size_t hashBitLen) |
| { |
| union { |
| uint8_t b[SKEIN_512_STATE_BYTES]; |
| uint64_t w[SKEIN_512_STATE_WORDS]; |
| } cfg; /* config block */ |
| |
| Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN); |
| ctx->h.hashBitLen = hashBitLen; /* output hash bit count */ |
| |
| switch (hashBitLen) { /* use pre-computed values, where available */ |
| #ifndef SKEIN_NO_PRECOMP |
| case 512: |
| bcopy(SKEIN_512_IV_512, ctx->X, sizeof (ctx->X)); |
| break; |
| case 384: |
| bcopy(SKEIN_512_IV_384, ctx->X, sizeof (ctx->X)); |
| break; |
| case 256: |
| bcopy(SKEIN_512_IV_256, ctx->X, sizeof (ctx->X)); |
| break; |
| case 224: |
| bcopy(SKEIN_512_IV_224, ctx->X, sizeof (ctx->X)); |
| break; |
| #endif |
| default: |
| /* |
| * here if there is no precomputed IV value available |
| * build/process the config block, type == CONFIG (could be |
| * precomputed) |
| */ |
| /* set tweaks: T0=0; T1=CFG | FINAL */ |
| Skein_Start_New_Type(ctx, CFG_FINAL); |
| |
| /* set the schema, version */ |
| cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); |
| /* hash result length in bits */ |
| cfg.w[1] = Skein_Swap64(hashBitLen); |
| cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL); |
| /* zero pad config block */ |
| bzero(&cfg.w[3], sizeof (cfg) - 3 * sizeof (cfg.w[0])); |
| |
| /* compute the initial chaining values from config block */ |
| /* zero the chaining variables */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| Skein_512_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN); |
| break; |
| } |
| |
| /* |
| * The chaining vars ctx->X are now initialized for the given |
| * hashBitLen. Set up to process the data message portion of the |
| * hash (default) |
| */ |
| Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */ |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* init the context for a MAC and/or tree hash operation */ |
| /* |
| * [identical to Skein_512_Init() when keyBytes == 0 && |
| * treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] |
| */ |
| int |
| Skein_512_InitExt(Skein_512_Ctxt_t *ctx, size_t hashBitLen, uint64_t treeInfo, |
| const uint8_t *key, size_t keyBytes) |
| { |
| union { |
| uint8_t b[SKEIN_512_STATE_BYTES]; |
| uint64_t w[SKEIN_512_STATE_WORDS]; |
| } cfg; /* config block */ |
| |
| Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN); |
| Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL); |
| |
| /* compute the initial chaining values ctx->X[], based on key */ |
| if (keyBytes == 0) { /* is there a key? */ |
| /* no key: use all zeroes as key for config block */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| } else { /* here to pre-process a key */ |
| |
| Skein_assert(sizeof (cfg.b) >= sizeof (ctx->X)); |
| /* do a mini-Init right here */ |
| /* set output hash bit count = state size */ |
| ctx->h.hashBitLen = 8 * sizeof (ctx->X); |
| /* set tweaks: T0 = 0; T1 = KEY type */ |
| Skein_Start_New_Type(ctx, KEY); |
| /* zero the initial chaining variables */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| (void) Skein_512_Update(ctx, key, keyBytes); /* hash the key */ |
| /* put result into cfg.b[] */ |
| (void) Skein_512_Final_Pad(ctx, cfg.b); |
| /* copy over into ctx->X[] */ |
| bcopy(cfg.b, ctx->X, sizeof (cfg.b)); |
| #if SKEIN_NEED_SWAP |
| { |
| uint_t i; |
| /* convert key bytes to context words */ |
| for (i = 0; i < SKEIN_512_STATE_WORDS; i++) |
| ctx->X[i] = Skein_Swap64(ctx->X[i]); |
| } |
| #endif |
| } |
| /* |
| * build/process the config block, type == CONFIG (could be |
| * precomputed for each key) |
| */ |
| ctx->h.hashBitLen = hashBitLen; /* output hash bit count */ |
| Skein_Start_New_Type(ctx, CFG_FINAL); |
| |
| bzero(&cfg.w, sizeof (cfg.w)); /* pre-pad cfg.w[] with zeroes */ |
| cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); |
| cfg.w[1] = Skein_Swap64(hashBitLen); /* hash result length in bits */ |
| /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */ |
| cfg.w[2] = Skein_Swap64(treeInfo); |
| |
| Skein_Show_Key(512, &ctx->h, key, keyBytes); |
| |
| /* compute the initial chaining values from config block */ |
| Skein_512_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN); |
| |
| /* The chaining vars ctx->X are now initialized */ |
| /* Set up to process the data message portion of the hash (default) */ |
| ctx->h.bCnt = 0; /* buffer b[] starts out empty */ |
| Skein_Start_New_Type(ctx, MSG); |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* process the input bytes */ |
| int |
| Skein_512_Update(Skein_512_Ctxt_t *ctx, const uint8_t *msg, size_t msgByteCnt) |
| { |
| size_t n; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); |
| |
| /* process full blocks, if any */ |
| if (msgByteCnt + ctx->h.bCnt > SKEIN_512_BLOCK_BYTES) { |
| /* finish up any buffered message data */ |
| if (ctx->h.bCnt) { |
| /* # bytes free in buffer b[] */ |
| n = SKEIN_512_BLOCK_BYTES - ctx->h.bCnt; |
| if (n) { |
| /* check on our logic here */ |
| Skein_assert(n < msgByteCnt); |
| bcopy(msg, &ctx->b[ctx->h.bCnt], n); |
| msgByteCnt -= n; |
| msg += n; |
| ctx->h.bCnt += n; |
| } |
| Skein_assert(ctx->h.bCnt == SKEIN_512_BLOCK_BYTES); |
| Skein_512_Process_Block(ctx, ctx->b, 1, |
| SKEIN_512_BLOCK_BYTES); |
| ctx->h.bCnt = 0; |
| } |
| /* |
| * now process any remaining full blocks, directly from input |
| * message data |
| */ |
| if (msgByteCnt > SKEIN_512_BLOCK_BYTES) { |
| /* number of full blocks to process */ |
| n = (msgByteCnt - 1) / SKEIN_512_BLOCK_BYTES; |
| Skein_512_Process_Block(ctx, msg, n, |
| SKEIN_512_BLOCK_BYTES); |
| msgByteCnt -= n * SKEIN_512_BLOCK_BYTES; |
| msg += n * SKEIN_512_BLOCK_BYTES; |
| } |
| Skein_assert(ctx->h.bCnt == 0); |
| } |
| |
| /* copy any remaining source message data bytes into b[] */ |
| if (msgByteCnt) { |
| Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES); |
| bcopy(msg, &ctx->b[ctx->h.bCnt], msgByteCnt); |
| ctx->h.bCnt += msgByteCnt; |
| } |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* finalize the hash computation and output the result */ |
| int |
| Skein_512_Final(Skein_512_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| size_t i, n, byteCnt; |
| uint64_t X[SKEIN_512_STATE_WORDS]; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); |
| |
| ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */ |
| /* zero pad b[] if necessary */ |
| if (ctx->h.bCnt < SKEIN_512_BLOCK_BYTES) |
| bzero(&ctx->b[ctx->h.bCnt], |
| SKEIN_512_BLOCK_BYTES - ctx->h.bCnt); |
| |
| /* process the final block */ |
| Skein_512_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); |
| |
| /* now output the result */ |
| /* total number of output bytes */ |
| byteCnt = (ctx->h.hashBitLen + 7) >> 3; |
| |
| /* run Threefish in "counter mode" to generate output */ |
| /* zero out b[], so it can hold the counter */ |
| bzero(ctx->b, sizeof (ctx->b)); |
| /* keep a local copy of counter mode "key" */ |
| bcopy(ctx->X, X, sizeof (X)); |
| for (i = 0; i * SKEIN_512_BLOCK_BYTES < byteCnt; i++) { |
| /* build the counter block */ |
| uint64_t tmp = Skein_Swap64((uint64_t)i); |
| bcopy(&tmp, ctx->b, sizeof (tmp)); |
| Skein_Start_New_Type(ctx, OUT_FINAL); |
| /* run "counter mode" */ |
| Skein_512_Process_Block(ctx, ctx->b, 1, sizeof (uint64_t)); |
| /* number of output bytes left to go */ |
| n = byteCnt - i * SKEIN_512_BLOCK_BYTES; |
| if (n >= SKEIN_512_BLOCK_BYTES) |
| n = SKEIN_512_BLOCK_BYTES; |
| Skein_Put64_LSB_First(hashVal + i * SKEIN_512_BLOCK_BYTES, |
| ctx->X, n); /* "output" the ctr mode bytes */ |
| Skein_Show_Final(512, &ctx->h, n, |
| hashVal + i * SKEIN_512_BLOCK_BYTES); |
| /* restore the counter mode key for next time */ |
| bcopy(X, ctx->X, sizeof (X)); |
| } |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* 1024-bit Skein */ |
| |
| /* init the context for a straight hashing operation */ |
| int |
| Skein1024_Init(Skein1024_Ctxt_t *ctx, size_t hashBitLen) |
| { |
| union { |
| uint8_t b[SKEIN1024_STATE_BYTES]; |
| uint64_t w[SKEIN1024_STATE_WORDS]; |
| } cfg; /* config block */ |
| |
| Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN); |
| ctx->h.hashBitLen = hashBitLen; /* output hash bit count */ |
| |
| switch (hashBitLen) { /* use pre-computed values, where available */ |
| #ifndef SKEIN_NO_PRECOMP |
| case 512: |
| bcopy(SKEIN1024_IV_512, ctx->X, sizeof (ctx->X)); |
| break; |
| case 384: |
| bcopy(SKEIN1024_IV_384, ctx->X, sizeof (ctx->X)); |
| break; |
| case 1024: |
| bcopy(SKEIN1024_IV_1024, ctx->X, sizeof (ctx->X)); |
| break; |
| #endif |
| default: |
| /* here if there is no precomputed IV value available */ |
| /* |
| * build/process the config block, type == CONFIG (could be |
| * precomputed) |
| */ |
| /* set tweaks: T0=0; T1=CFG | FINAL */ |
| Skein_Start_New_Type(ctx, CFG_FINAL); |
| |
| /* set the schema, version */ |
| cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); |
| /* hash result length in bits */ |
| cfg.w[1] = Skein_Swap64(hashBitLen); |
| cfg.w[2] = Skein_Swap64(SKEIN_CFG_TREE_INFO_SEQUENTIAL); |
| /* zero pad config block */ |
| bzero(&cfg.w[3], sizeof (cfg) - 3 * sizeof (cfg.w[0])); |
| |
| /* compute the initial chaining values from config block */ |
| /* zero the chaining variables */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| Skein1024_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN); |
| break; |
| } |
| |
| /* |
| * The chaining vars ctx->X are now initialized for the given |
| * hashBitLen. Set up to process the data message portion of the hash |
| * (default) |
| */ |
| Skein_Start_New_Type(ctx, MSG); /* T0=0, T1= MSG type */ |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* init the context for a MAC and/or tree hash operation */ |
| /* |
| * [identical to Skein1024_Init() when keyBytes == 0 && |
| * treeInfo == SKEIN_CFG_TREE_INFO_SEQUENTIAL] |
| */ |
| int |
| Skein1024_InitExt(Skein1024_Ctxt_t *ctx, size_t hashBitLen, uint64_t treeInfo, |
| const uint8_t *key, size_t keyBytes) |
| { |
| union { |
| uint8_t b[SKEIN1024_STATE_BYTES]; |
| uint64_t w[SKEIN1024_STATE_WORDS]; |
| } cfg; /* config block */ |
| |
| Skein_Assert(hashBitLen > 0, SKEIN_BAD_HASHLEN); |
| Skein_Assert(keyBytes == 0 || key != NULL, SKEIN_FAIL); |
| |
| /* compute the initial chaining values ctx->X[], based on key */ |
| if (keyBytes == 0) { /* is there a key? */ |
| /* no key: use all zeroes as key for config block */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| } else { /* here to pre-process a key */ |
| Skein_assert(sizeof (cfg.b) >= sizeof (ctx->X)); |
| /* do a mini-Init right here */ |
| /* set output hash bit count = state size */ |
| ctx->h.hashBitLen = 8 * sizeof (ctx->X); |
| /* set tweaks: T0 = 0; T1 = KEY type */ |
| Skein_Start_New_Type(ctx, KEY); |
| /* zero the initial chaining variables */ |
| bzero(ctx->X, sizeof (ctx->X)); |
| (void) Skein1024_Update(ctx, key, keyBytes); /* hash the key */ |
| /* put result into cfg.b[] */ |
| (void) Skein1024_Final_Pad(ctx, cfg.b); |
| /* copy over into ctx->X[] */ |
| bcopy(cfg.b, ctx->X, sizeof (cfg.b)); |
| #if SKEIN_NEED_SWAP |
| { |
| uint_t i; |
| /* convert key bytes to context words */ |
| for (i = 0; i < SKEIN1024_STATE_WORDS; i++) |
| ctx->X[i] = Skein_Swap64(ctx->X[i]); |
| } |
| #endif |
| } |
| /* |
| * build/process the config block, type == CONFIG (could be |
| * precomputed for each key) |
| */ |
| ctx->h.hashBitLen = hashBitLen; /* output hash bit count */ |
| Skein_Start_New_Type(ctx, CFG_FINAL); |
| |
| bzero(&cfg.w, sizeof (cfg.w)); /* pre-pad cfg.w[] with zeroes */ |
| cfg.w[0] = Skein_Swap64(SKEIN_SCHEMA_VER); |
| /* hash result length in bits */ |
| cfg.w[1] = Skein_Swap64(hashBitLen); |
| /* tree hash config info (or SKEIN_CFG_TREE_INFO_SEQUENTIAL) */ |
| cfg.w[2] = Skein_Swap64(treeInfo); |
| |
| Skein_Show_Key(1024, &ctx->h, key, keyBytes); |
| |
| /* compute the initial chaining values from config block */ |
| Skein1024_Process_Block(ctx, cfg.b, 1, SKEIN_CFG_STR_LEN); |
| |
| /* The chaining vars ctx->X are now initialized */ |
| /* Set up to process the data message portion of the hash (default) */ |
| ctx->h.bCnt = 0; /* buffer b[] starts out empty */ |
| Skein_Start_New_Type(ctx, MSG); |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* process the input bytes */ |
| int |
| Skein1024_Update(Skein1024_Ctxt_t *ctx, const uint8_t *msg, size_t msgByteCnt) |
| { |
| size_t n; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); |
| |
| /* process full blocks, if any */ |
| if (msgByteCnt + ctx->h.bCnt > SKEIN1024_BLOCK_BYTES) { |
| /* finish up any buffered message data */ |
| if (ctx->h.bCnt) { |
| /* # bytes free in buffer b[] */ |
| n = SKEIN1024_BLOCK_BYTES - ctx->h.bCnt; |
| if (n) { |
| /* check on our logic here */ |
| Skein_assert(n < msgByteCnt); |
| bcopy(msg, &ctx->b[ctx->h.bCnt], n); |
| msgByteCnt -= n; |
| msg += n; |
| ctx->h.bCnt += n; |
| } |
| Skein_assert(ctx->h.bCnt == SKEIN1024_BLOCK_BYTES); |
| Skein1024_Process_Block(ctx, ctx->b, 1, |
| SKEIN1024_BLOCK_BYTES); |
| ctx->h.bCnt = 0; |
| } |
| /* |
| * now process any remaining full blocks, directly from |
| * input message data |
| */ |
| if (msgByteCnt > SKEIN1024_BLOCK_BYTES) { |
| /* number of full blocks to process */ |
| n = (msgByteCnt - 1) / SKEIN1024_BLOCK_BYTES; |
| Skein1024_Process_Block(ctx, msg, n, |
| SKEIN1024_BLOCK_BYTES); |
| msgByteCnt -= n * SKEIN1024_BLOCK_BYTES; |
| msg += n * SKEIN1024_BLOCK_BYTES; |
| } |
| Skein_assert(ctx->h.bCnt == 0); |
| } |
| |
| /* copy any remaining source message data bytes into b[] */ |
| if (msgByteCnt) { |
| Skein_assert(msgByteCnt + ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES); |
| bcopy(msg, &ctx->b[ctx->h.bCnt], msgByteCnt); |
| ctx->h.bCnt += msgByteCnt; |
| } |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* finalize the hash computation and output the result */ |
| int |
| Skein1024_Final(Skein1024_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| size_t i, n, byteCnt; |
| uint64_t X[SKEIN1024_STATE_WORDS]; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); |
| |
| ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */ |
| /* zero pad b[] if necessary */ |
| if (ctx->h.bCnt < SKEIN1024_BLOCK_BYTES) |
| bzero(&ctx->b[ctx->h.bCnt], |
| SKEIN1024_BLOCK_BYTES - ctx->h.bCnt); |
| |
| /* process the final block */ |
| Skein1024_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); |
| |
| /* now output the result */ |
| /* total number of output bytes */ |
| byteCnt = (ctx->h.hashBitLen + 7) >> 3; |
| |
| /* run Threefish in "counter mode" to generate output */ |
| /* zero out b[], so it can hold the counter */ |
| bzero(ctx->b, sizeof (ctx->b)); |
| /* keep a local copy of counter mode "key" */ |
| bcopy(ctx->X, X, sizeof (X)); |
| for (i = 0; i * SKEIN1024_BLOCK_BYTES < byteCnt; i++) { |
| /* build the counter block */ |
| uint64_t tmp = Skein_Swap64((uint64_t)i); |
| bcopy(&tmp, ctx->b, sizeof (tmp)); |
| Skein_Start_New_Type(ctx, OUT_FINAL); |
| /* run "counter mode" */ |
| Skein1024_Process_Block(ctx, ctx->b, 1, sizeof (uint64_t)); |
| /* number of output bytes left to go */ |
| n = byteCnt - i * SKEIN1024_BLOCK_BYTES; |
| if (n >= SKEIN1024_BLOCK_BYTES) |
| n = SKEIN1024_BLOCK_BYTES; |
| Skein_Put64_LSB_First(hashVal + i * SKEIN1024_BLOCK_BYTES, |
| ctx->X, n); /* "output" the ctr mode bytes */ |
| Skein_Show_Final(1024, &ctx->h, n, |
| hashVal + i * SKEIN1024_BLOCK_BYTES); |
| /* restore the counter mode key for next time */ |
| bcopy(X, ctx->X, sizeof (X)); |
| } |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* Functions to support MAC/tree hashing */ |
| /* (this code is identical for Optimized and Reference versions) */ |
| |
| /* finalize the hash computation and output the block, no OUTPUT stage */ |
| int |
| Skein_256_Final_Pad(Skein_256_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); |
| |
| ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */ |
| /* zero pad b[] if necessary */ |
| if (ctx->h.bCnt < SKEIN_256_BLOCK_BYTES) |
| bzero(&ctx->b[ctx->h.bCnt], |
| SKEIN_256_BLOCK_BYTES - ctx->h.bCnt); |
| /* process the final block */ |
| Skein_256_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); |
| |
| /* "output" the state bytes */ |
| Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN_256_BLOCK_BYTES); |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* finalize the hash computation and output the block, no OUTPUT stage */ |
| int |
| Skein_512_Final_Pad(Skein_512_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); |
| |
| ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; /* tag as the final block */ |
| /* zero pad b[] if necessary */ |
| if (ctx->h.bCnt < SKEIN_512_BLOCK_BYTES) |
| bzero(&ctx->b[ctx->h.bCnt], |
| SKEIN_512_BLOCK_BYTES - ctx->h.bCnt); |
| /* process the final block */ |
| Skein_512_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); |
| |
| /* "output" the state bytes */ |
| Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN_512_BLOCK_BYTES); |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* finalize the hash computation and output the block, no OUTPUT stage */ |
| int |
| Skein1024_Final_Pad(Skein1024_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); |
| |
| /* tag as the final block */ |
| ctx->h.T[1] |= SKEIN_T1_FLAG_FINAL; |
| /* zero pad b[] if necessary */ |
| if (ctx->h.bCnt < SKEIN1024_BLOCK_BYTES) |
| bzero(&ctx->b[ctx->h.bCnt], |
| SKEIN1024_BLOCK_BYTES - ctx->h.bCnt); |
| /* process the final block */ |
| Skein1024_Process_Block(ctx, ctx->b, 1, ctx->h.bCnt); |
| |
| /* "output" the state bytes */ |
| Skein_Put64_LSB_First(hashVal, ctx->X, SKEIN1024_BLOCK_BYTES); |
| |
| return (SKEIN_SUCCESS); |
| } |
| |
| #if SKEIN_TREE_HASH |
| /* just do the OUTPUT stage */ |
| int |
| Skein_256_Output(Skein_256_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| size_t i, n, byteCnt; |
| uint64_t X[SKEIN_256_STATE_WORDS]; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN_256_BLOCK_BYTES, SKEIN_FAIL); |
| |
| /* now output the result */ |
| /* total number of output bytes */ |
| byteCnt = (ctx->h.hashBitLen + 7) >> 3; |
| |
| /* run Threefish in "counter mode" to generate output */ |
| /* zero out b[], so it can hold the counter */ |
| bzero(ctx->b, sizeof (ctx->b)); |
| /* keep a local copy of counter mode "key" */ |
| bcopy(ctx->X, X, sizeof (X)); |
| for (i = 0; i * SKEIN_256_BLOCK_BYTES < byteCnt; i++) { |
| /* build the counter block */ |
| uint64_t tmp = Skein_Swap64((uint64_t)i); |
| bcopy(&tmp, ctx->b, sizeof (tmp)); |
| Skein_Start_New_Type(ctx, OUT_FINAL); |
| /* run "counter mode" */ |
| Skein_256_Process_Block(ctx, ctx->b, 1, sizeof (uint64_t)); |
| /* number of output bytes left to go */ |
| n = byteCnt - i * SKEIN_256_BLOCK_BYTES; |
| if (n >= SKEIN_256_BLOCK_BYTES) |
| n = SKEIN_256_BLOCK_BYTES; |
| Skein_Put64_LSB_First(hashVal + i * SKEIN_256_BLOCK_BYTES, |
| ctx->X, n); /* "output" the ctr mode bytes */ |
| Skein_Show_Final(256, &ctx->h, n, |
| hashVal + i * SKEIN_256_BLOCK_BYTES); |
| /* restore the counter mode key for next time */ |
| bcopy(X, ctx->X, sizeof (X)); |
| } |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* just do the OUTPUT stage */ |
| int |
| Skein_512_Output(Skein_512_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| size_t i, n, byteCnt; |
| uint64_t X[SKEIN_512_STATE_WORDS]; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN_512_BLOCK_BYTES, SKEIN_FAIL); |
| |
| /* now output the result */ |
| /* total number of output bytes */ |
| byteCnt = (ctx->h.hashBitLen + 7) >> 3; |
| |
| /* run Threefish in "counter mode" to generate output */ |
| /* zero out b[], so it can hold the counter */ |
| bzero(ctx->b, sizeof (ctx->b)); |
| /* keep a local copy of counter mode "key" */ |
| bcopy(ctx->X, X, sizeof (X)); |
| for (i = 0; i * SKEIN_512_BLOCK_BYTES < byteCnt; i++) { |
| /* build the counter block */ |
| uint64_t tmp = Skein_Swap64((uint64_t)i); |
| bcopy(&tmp, ctx->b, sizeof (tmp)); |
| Skein_Start_New_Type(ctx, OUT_FINAL); |
| /* run "counter mode" */ |
| Skein_512_Process_Block(ctx, ctx->b, 1, sizeof (uint64_t)); |
| /* number of output bytes left to go */ |
| n = byteCnt - i * SKEIN_512_BLOCK_BYTES; |
| if (n >= SKEIN_512_BLOCK_BYTES) |
| n = SKEIN_512_BLOCK_BYTES; |
| Skein_Put64_LSB_First(hashVal + i * SKEIN_512_BLOCK_BYTES, |
| ctx->X, n); /* "output" the ctr mode bytes */ |
| Skein_Show_Final(256, &ctx->h, n, |
| hashVal + i * SKEIN_512_BLOCK_BYTES); |
| /* restore the counter mode key for next time */ |
| bcopy(X, ctx->X, sizeof (X)); |
| } |
| return (SKEIN_SUCCESS); |
| } |
| |
| /* just do the OUTPUT stage */ |
| int |
| Skein1024_Output(Skein1024_Ctxt_t *ctx, uint8_t *hashVal) |
| { |
| size_t i, n, byteCnt; |
| uint64_t X[SKEIN1024_STATE_WORDS]; |
| |
| /* catch uninitialized context */ |
| Skein_Assert(ctx->h.bCnt <= SKEIN1024_BLOCK_BYTES, SKEIN_FAIL); |
| |
| /* now output the result */ |
| /* total number of output bytes */ |
| byteCnt = (ctx->h.hashBitLen + 7) >> 3; |
| |
| /* run Threefish in "counter mode" to generate output */ |
| /* zero out b[], so it can hold the counter */ |
| bzero(ctx->b, sizeof (ctx->b)); |
| /* keep a local copy of counter mode "key" */ |
| bcopy(ctx->X, X, sizeof (X)); |
| for (i = 0; i * SKEIN1024_BLOCK_BYTES < byteCnt; i++) { |
| /* build the counter block */ |
| uint64_t tmp = Skein_Swap64((uint64_t)i); |
| bcopy(&tmp, ctx->b, sizeof (tmp)); |
| Skein_Start_New_Type(ctx, OUT_FINAL); |
| /* run "counter mode" */ |
| Skein1024_Process_Block(ctx, ctx->b, 1, sizeof (uint64_t)); |
| /* number of output bytes left to go */ |
| n = byteCnt - i * SKEIN1024_BLOCK_BYTES; |
| if (n >= SKEIN1024_BLOCK_BYTES) |
| n = SKEIN1024_BLOCK_BYTES; |
| Skein_Put64_LSB_First(hashVal + i * SKEIN1024_BLOCK_BYTES, |
| ctx->X, n); /* "output" the ctr mode bytes */ |
| Skein_Show_Final(256, &ctx->h, n, |
| hashVal + i * SKEIN1024_BLOCK_BYTES); |
| /* restore the counter mode key for next time */ |
| bcopy(X, ctx->X, sizeof (X)); |
| } |
| return (SKEIN_SUCCESS); |
| } |
| #endif |
| |
| #ifdef _KERNEL |
| EXPORT_SYMBOL(Skein_512_Init); |
| EXPORT_SYMBOL(Skein_512_InitExt); |
| EXPORT_SYMBOL(Skein_512_Update); |
| EXPORT_SYMBOL(Skein_512_Final); |
| #endif |