| # Makefile.in generated by automake 1.11.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, |
| # Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| subdir = src |
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \ |
| $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc2.m4 \ |
| $(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/iconv.m4 \ |
| $(top_srcdir)/m4/intdiv0.m4 $(top_srcdir)/m4/intl.m4 \ |
| $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intmax.m4 \ |
| $(top_srcdir)/m4/inttypes-pri.m4 \ |
| $(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/lcmessage.m4 \ |
| $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ |
| $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \ |
| $(top_srcdir)/m4/lock.m4 $(top_srcdir)/m4/longlong.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \ |
| $(top_srcdir)/m4/printf-posix.m4 $(top_srcdir)/m4/progtest.m4 \ |
| $(top_srcdir)/m4/size_max.m4 $(top_srcdir)/m4/stdint_h.m4 \ |
| $(top_srcdir)/m4/uintmax_t.m4 $(top_srcdir)/m4/visibility.m4 \ |
| $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wint_t.m4 \ |
| $(top_srcdir)/m4/xsize.m4 $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs |
| CONFIG_HEADER = $(top_builddir)/config.h |
| CONFIG_CLEAN_FILES = |
| CONFIG_CLEAN_VPATH_FILES = |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ |
| $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ |
| distdir |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| ACLOCAL = @ACLOCAL@ |
| ALLOCA = @ALLOCA@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@ |
| CATOBJEXT = @CATOBJEXT@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CFLAG_VISIBILITY = @CFLAG_VISIBILITY@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CURSESLIB = @CURSESLIB@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DATADIRNAME = @DATADIRNAME@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GENCAT = @GENCAT@ |
| GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ |
| GLIBC2 = @GLIBC2@ |
| GLIBC21 = @GLIBC21@ |
| GMSGFMT = @GMSGFMT@ |
| GMSGFMT_015 = @GMSGFMT_015@ |
| GREP = @GREP@ |
| HAVE_ASPRINTF = @HAVE_ASPRINTF@ |
| HAVE_POSIX_PRINTF = @HAVE_POSIX_PRINTF@ |
| HAVE_SNPRINTF = @HAVE_SNPRINTF@ |
| HAVE_VISIBILITY = @HAVE_VISIBILITY@ |
| HAVE_WPRINTF = @HAVE_WPRINTF@ |
| HUNSPELL_VERSION_MAJOR = @HUNSPELL_VERSION_MAJOR@ |
| HUNSPELL_VERSION_MINOR = @HUNSPELL_VERSION_MINOR@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INSTOBJEXT = @INSTOBJEXT@ |
| INTLBISON = @INTLBISON@ |
| INTLLIBS = @INTLLIBS@ |
| INTLOBJS = @INTLOBJS@ |
| INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@ |
| INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBICONV = @LIBICONV@ |
| LIBINTL = @LIBINTL@ |
| LIBMULTITHREAD = @LIBMULTITHREAD@ |
| LIBOBJS = @LIBOBJS@ |
| LIBPTH = @LIBPTH@ |
| LIBPTH_PREFIX = @LIBPTH_PREFIX@ |
| LIBS = @LIBS@ |
| LIBTHREAD = @LIBTHREAD@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBC = @LTLIBC@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBINTL = @LTLIBINTL@ |
| LTLIBMULTITHREAD = @LTLIBMULTITHREAD@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LTLIBPTH = @LTLIBPTH@ |
| LTLIBTHREAD = @LTLIBTHREAD@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_015 = @MSGFMT_015@ |
| MSGMERGE = @MSGMERGE@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| POSUB = @POSUB@ |
| PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@ |
| RANLIB = @RANLIB@ |
| READLINELIB = @READLINELIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| WINDRES = @WINDRES@ |
| WOE32 = @WOE32@ |
| WOE32DLL = @WOE32DLL@ |
| XFAILED = @XFAILED@ |
| XGETTEXT = @XGETTEXT@ |
| XGETTEXT_015 = @XGETTEXT_015@ |
| XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| lt_ECHO = @lt_ECHO@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| SUBDIRS = hunspell parsers tools win_api |
| all: all-recursive |
| |
| .SUFFIXES: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
| && { if test -f $@; then exit 0; else break; fi; }; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu src/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(am__aclocal_m4_deps): |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile |
| installdirs: installdirs-recursive |
| installdirs-am: |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ |
| install-am install-strip tags-recursive |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am check check-am clean clean-generic clean-libtool \ |
| ctags ctags-recursive distclean distclean-generic \ |
| distclean-libtool distclean-tags distdir dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-dvi install-dvi-am install-exec \ |
| install-exec-am install-html install-html-am install-info \ |
| install-info-am install-man install-pdf install-pdf-am \ |
| install-ps install-ps-am install-strip installcheck \ |
| installcheck-am installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ |
| uninstall uninstall-am |
| |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
