Merge pull request #1848 from zzwzds/docs-remove-stale-and-typo docs: remove stale API references and fix symbol typos in man pages
diff --git a/debian/libibnetdisc-dev.install b/debian/libibnetdisc-dev.install index bd5f4c7..9b4dde3 100644 --- a/debian/libibnetdisc-dev.install +++ b/debian/libibnetdisc-dev.install
@@ -2,12 +2,9 @@ usr/lib/*/libibnetdisc*.a usr/lib/*/libibnetdisc*.so usr/lib/*/pkgconfig/libibnetdisc.pc -usr/share/man/man3/ibnd_debug.3 usr/share/man/man3/ibnd_destroy_fabric.3 usr/share/man/man3/ibnd_discover_fabric.3 usr/share/man/man3/ibnd_find_node_dr.3 usr/share/man/man3/ibnd_find_node_guid.3 usr/share/man/man3/ibnd_iter_nodes.3 usr/share/man/man3/ibnd_iter_nodes_type.3 -usr/share/man/man3/ibnd_set_max_smps_on_wire.3 -usr/share/man/man3/ibnd_show_progress.3
diff --git a/infiniband-diags/man/check_lft_balance.8.in.rst b/infiniband-diags/man/check_lft_balance.8.in.rst index 92b7a8a..76bb2db 100644 --- a/infiniband-diags/man/check_lft_balance.8.in.rst +++ b/infiniband-diags/man/check_lft_balance.8.in.rst
@@ -13,15 +13,18 @@ SYNOPSIS ======== -check_lft_balance.sh [-hRv] +check_lft_balance -l <lft-output> -i <ibnetdiscover-cache> [-e] [-v] DESCRIPTION =========== -check_lft_balance.sh is a script which checks for balancing in Infiniband +check_lft_balance is a script which checks for balancing in Infiniband unicast forwarding tables. It analyzes the output of -**dump_lfts(8)** and **iblinkinfo(8)** +**dump_lfts(8)** and an **ibnetdiscover** cache file + +On non-Debian distributions, the script is installed as +**check_lft_balance.pl**. OPTIONS ======= @@ -29,14 +32,18 @@ **-h** show help -**-R** - Recalculate dump_lfts information, ie do not use the cached - information. This option is slower but should be used if the diag - tools have not been used for some time or if there are other reasons to - believe that the fabric has changed. +**-l <lft-output>** + file containing the output of **dump_lfts(8)** (required) + +**-i <ibnetdiscover-cache>** + file containing the cache generated by **ibnetdiscover --cache** + (required) + +**-e** + turn on heuristic(s) to look at switch balances deeper **-v** - verbose output + verbose output, output all switches SEE ALSO ========
diff --git a/infiniband-diags/man/saquery.8.in.rst b/infiniband-diags/man/saquery.8.in.rst index 344d815..587dbb9 100644 --- a/infiniband-diags/man/saquery.8.in.rst +++ b/infiniband-diags/man/saquery.8.in.rst
@@ -184,7 +184,6 @@ ------------------- .. include:: common/opt_t.rst -.. include:: common/opt_o-outstanding_smps.rst .. include:: common/opt_node_name_map.rst .. include:: common/opt_z-config.rst @@ -202,7 +201,7 @@ DEPENDENCIES ============ -OpenSM (or other running SM/SA), libosmcomp, libibumad, libibmad +OpenSM (or other running SM/SA), libibumad, libibmad, libibnetdisc AUTHORS =======
diff --git a/libibnetdisc/man/CMakeLists.txt b/libibnetdisc/man/CMakeLists.txt index 01457dd..0c785b8 100644 --- a/libibnetdisc/man/CMakeLists.txt +++ b/libibnetdisc/man/CMakeLists.txt
@@ -5,10 +5,7 @@ ) rdma_alias_man_pages( - ibnd_discover_fabric.3 ibnd_debug.3 ibnd_discover_fabric.3 ibnd_destroy_fabric.3 - ibnd_discover_fabric.3 ibnd_set_max_smps_on_wire.3 - ibnd_discover_fabric.3 ibnd_show_progress.3 ibnd_find_node_guid.3 ibnd_find_node_dr.3 ibnd_iter_nodes.3 ibnd_iter_nodes_type.3 )
diff --git a/libibnetdisc/man/ibnd_discover_fabric.3 b/libibnetdisc/man/ibnd_discover_fabric.3 index baa4c81..9634a38 100644 --- a/libibnetdisc/man/ibnd_discover_fabric.3 +++ b/libibnetdisc/man/ibnd_discover_fabric.3
@@ -1,65 +1,74 @@ .TH IBND_DISCOVER_FABRIC 3 "July 25, 2008" "OpenIB" "OpenIB Programmer's Manual" .SH "NAME" -ibnd_discover_fabric, ibnd_destroy_fabric, ibnd_debug ibnd_show_progress \- initialize ibnetdiscover library. +ibnd_discover_fabric, ibnd_destroy_fabric \- initialize ibnetdiscover library. .SH "SYNOPSIS" .nf .B #include <infiniband/ibnetdisc.h> .sp -.BI "ibnd_fabric_t *ibnd_discover_fabric(struct ibmad_port *ibmad_port, int timeout_ms, ib_portid_t *from, int hops)" -.BI "void ibnd_destroy_fabric(ibnd_fabric_t *fabric)" -.BI "void ibnd_debug(int i)" -.BI "void ibnd_show_progress(int i)" -.BI "int ibnd_set_max_smps_on_wire(int i)" +.BI "ibnd_fabric_t *ibnd_discover_fabric(char " "*ca_name" ", int " "ca_port" ", ib_portid_t " "*from" ", struct ibnd_config " "*config)" +.BI "void ibnd_destroy_fabric(ibnd_fabric_t " "*fabric)" .SH "DESCRIPTION" .B ibnd_discover_fabric() -Discover the fabric connected to the port specified by ibmad_port, using a timeout specified. The "from" and "hops" parameters are optional and allow one to scan part of a fabric by specifying a node "from" and a number of hops away from that node to scan, "hops". This gives the user a "sub-fabric" which is "centered" anywhere they chose. +Discover the fabric connected to the port specified by ca_name and ca_port. The "from" parameter is optional and allows one to scan part of a fabric by specifying a node "from", giving the user a "sub-fabric" which is "centered" anywhere they chose. The "config" parameter tunes the scan (see "struct ibnd_config" below). -ibmad_port must be opened with at least IB_SMI_CLASS and IB_SMI_DIRECT_CLASS -classes for ibnd_discover_fabric to work. +ca_name and ca_port may be NULL/0, in which case a default CA and port are used. + +.TP +.B struct ibnd_config +Configuration which tunes the scan. The following members are +recognized (a value of 0 selects the library default): +.RS +.TP +.B show_progress +Indicate that the library should print debug output which shows +its progress through the fabric. +.TP +.B max_smps +Set the number of SMP's which will be issued on the wire simultaneously. +.TP +.B max_hops +Limit the maximum number of hops scanned away from the "from" node. +.TP +.B timeout_ms +Timeout in milliseconds used for each SMP request. +.TP +.B retries +Number of retries for each SMP request. +.TP +.B mkey +MKey used for SMP requests requiring authorization. +.RE .B ibnd_destroy_fabric() free all memory and resources associated with the fabric. -.B ibnd_debug() -Set the debug level to be printed as library operations take place. - -.B ibnd_show_progress() -Indicate that the library should print debug output which shows it's progress -through the fabric. - -.B ibnd_set_max_smps_on_wire() -Set the number of SMP's which will be issued on the wire simultaneously. - .SH "RETURN VALUE" .B ibnd_discover_fabric() return NULL on failure, otherwise a valid ibnd_fabric_t object. -.B ibnd_destory_fabric(), ibnd_debug() +.B ibnd_destroy_fabric() NONE -.B ibnd_set_max_smps_on_wire() -The previous value is returned - .SH "EXAMPLES" .B Discover the entire fabric connected to device "mthca0", port 1. - int mgmt_classes[2] = {IB_SMI_CLASS, IB_SMI_DIRECT_CLASS}; - struct ibmad_port *ibmad_port = mad_rpc_open_port(ca, ca_port, mgmt_classes, 2); - ibnd_fabric_t *fabric = ibnd_discover_fabric(ibmad_port, 100, NULL, 0); + struct ibnd_config cfg = { 0 }; + ibnd_fabric_t *fabric = ibnd_discover_fabric("mthca0", 1, NULL, &cfg); ... ibnd_destroy_fabric(fabric); - mad_rpc_close_port(ibmad_port); .B Discover only a single node and those nodes connected to it. + struct ibnd_config cfg = { .max_hops = 1 }; + ib_portid_t port_id = { 0 }; ... str2drpath(&(port_id.drpath), from, 0, 0); ... - ibnd_discover_fabric(ibmad_port, 100, &port_id, 1); + ibnd_discover_fabric("mthca0", 1, &port_id, &cfg); ... .SH "SEE ALSO" - libibmad, mad_rpc_open_port + libibmad, str2drpath .SH "AUTHORS" .TP Ira Weiny <weiny2@llnl.gov>
diff --git a/libibnetdisc/man/ibnd_iter_nodes.3 b/libibnetdisc/man/ibnd_iter_nodes.3 index 469f07b..e083dd9 100644 --- a/libibnetdisc/man/ibnd_iter_nodes.3 +++ b/libibnetdisc/man/ibnd_iter_nodes.3
@@ -5,8 +5,8 @@ .nf .B #include <infiniband/ibnetdisc.h> .sp -.BI "void ibnd_iter_nodes(ibnd_fabric_t *fabric, ibnd_iter_func_t func, void *user_data)" -.BI "void ibnd_iter_nodes_type(ibnd_fabric_t *fabric, ibnd_iter_func_t func, ibnd_node_type_t type, void *user_data)" +.BI "void ibnd_iter_nodes(ibnd_fabric_t *fabric, ibnd_iter_node_func_t func, void *user_data)" +.BI "void ibnd_iter_nodes_type(ibnd_fabric_t *fabric, ibnd_iter_node_func_t func, int node_type, void *user_data)" .SH "DESCRIPTION" .B ibnd_iter_nodes() Itterate through all the nodes in the fabric and call "func" on them.
diff --git a/libibumad/man/umad_free_ca_device_list.3.md b/libibumad/man/umad_free_ca_device_list.3.md index c12f6e3..efe9528 100644 --- a/libibumad/man/umad_free_ca_device_list.3.md +++ b/libibumad/man/umad_free_ca_device_list.3.md
@@ -24,7 +24,7 @@ # DESCRIPTION **umad_free_ca_device_list()** frees the *struct umad_device_node* -list and its values that allocated with umad_get_ca_namelist(). +list and its values that allocated with umad_get_ca_device_list(). The argument head is list of *struct umad_device_node* filled with local IB devices(CAs) names.
diff --git a/libibverbs/man/ibv_advise_mr.3.md b/libibverbs/man/ibv_advise_mr.3.md index a9c7aa6..a626f32 100644 --- a/libibverbs/man/ibv_advise_mr.3.md +++ b/libibverbs/man/ibv_advise_mr.3.md
@@ -65,7 +65,7 @@ *sg_list* : Pointer to the s/g array - When using IBV_ADVISE_OP_PREFETCH advise value, all the lkeys of all + When using IBV_ADVISE_MR_ADVICE_PREFETCH advise value, all the lkeys of all the scatter gather elements (SGEs) must be associated with ODP MRs (MRs that were registered with IBV_ACCESS_ON_DEMAND).
diff --git a/libibverbs/man/ibv_alloc_dm.3 b/libibverbs/man/ibv_alloc_dm.3 index 5c66639..d626283 100644 --- a/libibverbs/man/ibv_alloc_dm.3 +++ b/libibverbs/man/ibv_alloc_dm.3
@@ -52,7 +52,7 @@ .BI "int ibv_memcpy_from_dm(void " "*host_addr" ", struct ibv_dm " "*dm" ", .BI " uint64_t " "dm_offset" ", size_t " "length" "); .sp -.I dm_offest +.I dm_offset is the byte offset from the beginning of the allocated device memory buffer to access. .sp .I host_addr @@ -79,7 +79,7 @@ .I dm the associated dm for this registration. .sp -.I dm_offest +.I dm_offset is the byte offset from the beginning of the allocated device memory buffer to register. .sp .I length
diff --git a/libibverbs/man/ibv_create_flow_action.3.md b/libibverbs/man/ibv_create_flow_action.3.md index f0736ca..ecc6ac2 100644 --- a/libibverbs/man/ibv_create_flow_action.3.md +++ b/libibverbs/man/ibv_create_flow_action.3.md
@@ -149,24 +149,24 @@ *spi* : The value for the ESP Security Parameters Index. - It is only used for *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_FULL_OFFLAOD*. + It is only used for *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_FULL_OFFLOAD*. *seq* : The initial 32 lower bytes of the sequence number. This is the value of the ESP sequence number. - It is only used for *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_FULL_OFFLAOD*. + It is only used for *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_FULL_OFFLOAD*. *tfc_pad* : The length of Traffic Flow Confidentiality Padding as specified by RFC4303. If it is set to zero no additional padding is added. - It is only used for *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_FULL_OFFLAOD*. + It is only used for *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_FULL_OFFLOAD*. *hard_limit_pkts* : The hard lifetime of the SA measured in number of packets. As specified by RFC4301. After this limit is reached the action will drop future packets to prevent breaking the crypto. - It is only used for *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_FULL_OFFLAOD*. + It is only used for *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_FULL_OFFLOAD*. ## Inline Crypto Mode @@ -239,16 +239,16 @@ Setting this flag indicates that the bottom of the replay window is between 2^31 - 2^32. -## Key Material for AES GCM (*IBV_ACTION_ESP_KEYMAT_AES_GCM*) +## Key Material for AES GCM (*IBV_FLOW_ACTION_ESP_KEYMAT_AES_GCM*) The AES GCM crypto algorithm as defined by RFC4106. This struct is to be provided in *keymat_ptr* when *keymat_proto* is set to -*IBV_ACTION_ESP_KEYMAT_AES_GCM*. +*IBV_FLOW_ACTION_ESP_KEYMAT_AES_GCM*. ```c -struct ibv_flow_action_esp_aes_keymat_aes_gcm { +struct ib_uverbs_flow_action_esp_keymat_aes_gcm { uint64_t iv; - uint32_t iv_algo; /* Use enum ib_uverbs_flow_action_esp_aes_gcm_keymat_iv_algo */ + uint32_t iv_algo; /* Use enum ib_uverbs_flow_action_esp_keymat_aes_gcm_iv_algo */ uint32_t salt; uint32_t icv_len; @@ -293,15 +293,15 @@ bitmap will shift to represent this as in RFC6479. The replay window cannot shift more than 2^31 sequence numbers forward. -This struct is to be provided in *replay_ptr* when *reply_proto* is set to -*IBV_FLOW_ACTION_ESP_REPLAY_BMP*. In this mode reply_ptr and reply_len should +This struct is to be provided in *replay_ptr* when *replay_proto* is set to +*IBV_FLOW_ACTION_ESP_REPLAY_BMP*. In this mode replay_ptr and replay_len should point to a struct ibv_flow_action_esp_replay_bmp containing: *size* : The size of the bitmap. ## ESP Encapsulation -An *esp_encap* specification is required when *eps_attr* flags +An *esp_encap* specification is required when *esp_attr* flags *IB_UVERBS_FLOW_ACTION_ESP_FLAGS_TUNNEL* is set. It is used to provide the fields for the encapsulation header that is added/removed to/from packets. Tunnel and Transport mode are defined as in RFC4301. @@ -327,12 +327,12 @@ Upon success *ibv_create_flow_action_esp* will return a new *struct ibv_flow_action* object, on error NULL will be returned and errno will be set. -Upon success *ibv_modify_action_esp* will return 0. On error the value of -errno will be returned. If ibv_modify_flow_action fails, it is guaranteed that +Upon success *ibv_modify_flow_action_esp* will return 0. On error the value of +errno will be returned. If ibv_modify_flow_action_esp fails, it is guaranteed that the last action still holds. If it succeeds, there is a point in the future where the old action is applied on all packets until this point and the new one is applied on all packets from this point and on. # SEE ALSO -*ibv_create_flow(3)*, *ibv_destroy_action(3)*, *RFC 4106* +*ibv_create_flow(3)*, *ibv_destroy_flow_action(3)*, *RFC 4106*
diff --git a/libibverbs/man/ibv_query_device_ex.3 b/libibverbs/man/ibv_query_device_ex.3 index c7b6764..3f22237 100644 --- a/libibverbs/man/ibv_query_device_ex.3 +++ b/libibverbs/man/ibv_query_device_ex.3
@@ -48,15 +48,15 @@ }; struct ibv_odp_caps { - uint64_t general_odp_caps; /* Mask with enum ibv_odp_general_cap_bits */ + uint64_t general_caps; /* Mask with enum ibv_odp_general_caps */ struct { - uint32_t rc_odp_caps; /* Mask with enum ibv_odp_tranport_cap_bits to know which operations are supported. */ - uint32_t uc_odp_caps; /* Mask with enum ibv_odp_tranport_cap_bits to know which operations are supported. */ - uint32_t ud_odp_caps; /* Mask with enum ibv_odp_tranport_cap_bits to know which operations are supported. */ + uint32_t rc_odp_caps; /* Mask with enum ibv_odp_transport_cap_bits to know which operations are supported. */ + uint32_t uc_odp_caps; /* Mask with enum ibv_odp_transport_cap_bits to know which operations are supported. */ + uint32_t ud_odp_caps; /* Mask with enum ibv_odp_transport_cap_bits to know which operations are supported. */ } per_transport_caps; }; -enum ibv_odp_general_cap_bits { +enum ibv_odp_general_caps { IBV_ODP_SUPPORT = 1 << 0, /* On demand paging is supported */ IBV_ODP_SUPPORT_IMPLICIT = 1 << 1, /* Implicit on demand paging is supported */ };
diff --git a/libibverbs/man/ibv_read_counters.3.md b/libibverbs/man/ibv_read_counters.3.md index 74407b1..bf89bc7 100644 --- a/libibverbs/man/ibv_read_counters.3.md +++ b/libibverbs/man/ibv_read_counters.3.md
@@ -125,7 +125,7 @@ .flags = 0, }, .spec_eth = { - .type = IBV_EXP_FLOW_SPEC_ETH, + .type = IBV_FLOW_SPEC_ETH, .size = sizeof(struct ibv_flow_spec_eth), .val = FLOW_SPEC_ETH_MAC_VAL, .mask = FLOW_SPEC_ETH_MAC_MASK,
diff --git a/libibverbs/man/ibv_wr_post.3.md b/libibverbs/man/ibv_wr_post.3.md index 9cfac3a..d0bbc35 100644 --- a/libibverbs/man/ibv_wr_post.3.md +++ b/libibverbs/man/ibv_wr_post.3.md
@@ -258,7 +258,7 @@ *ibv_wr_set_inline_data_list()* : Copy send data from a list of buffers, logically concatenated together. Each buffer is specified by an element in an array of *struct - ibv_inl_data*. + ibv_data_buf*. ## Flags @@ -320,7 +320,7 @@ qpx->wr_id = my_wr_id_2; qpx->wr_flags = IBV_SEND_SIGNALED; ibv_wr_rdma_write_imm(qpx, rkey, remote_addr_2, htonl(0x1234)); -ibv_set_wr_sge(qpx, lkey, local_addr_2, length_2); +ibv_wr_set_sge(qpx, lkey, local_addr_2, length_2); /* Begin processing WRs */ ret = ibv_wr_complete(qpx);
diff --git a/librdmacm/man/cmtime.1 b/librdmacm/man/cmtime.1 index 6af8fcc..581f8d8 100644 --- a/librdmacm/man/cmtime.1 +++ b/librdmacm/man/cmtime.1
@@ -106,7 +106,7 @@ set to blocking mode. Only supported in 1 client 1 server mode (-P 2). .TP \-t timeout_ms -Timeout in millseconds (ms) when resolving address or +Timeout in milliseconds (ms) when resolving address or route. (default 2000 - 2 seconds) .SH "EXAMPLES" One client connecting to one server:
diff --git a/librdmacm/man/rdma_create_ep.3 b/librdmacm/man/rdma_create_ep.3 index b1f3976..0f0156d 100644 --- a/librdmacm/man/rdma_create_ep.3 +++ b/librdmacm/man/rdma_create_ep.3
@@ -31,7 +31,7 @@ may use this call to allocate an rdma_cm_id based on the results. .P If the rdma_cm_id will be used on the active side of a connection, -meaning that res->ai_flag does not have RAI_PASSIVE set, rdma_create_ep +meaning that res->ai_flags does not have RAI_PASSIVE set, rdma_create_ep will automatically create a QP on the rdma_cm_id if qp_init_attr is not NULL. The QP will be associated with the specified protection domain, if provided, or a default protection domain if not. Users @@ -41,7 +41,7 @@ calls rdma_resolve_addr and rdma_resolve_route are not necessary. .P If the rdma_cm_id will be used on the passive side of a connection, -indicated by having res->ai_flag RAI_PASSIVE set, this call will save +indicated by having res->ai_flags RAI_PASSIVE set, this call will save the provided pd and qp_init_attr parameters. When a new connection request is retrieved by calling rdma_get_request, the rdma_cm_id associated with the new connection will automatically be associated
diff --git a/librdmacm/man/rdma_getaddrinfo.3 b/librdmacm/man/rdma_getaddrinfo.3 index 85fab26..de4debc 100644 --- a/librdmacm/man/rdma_getaddrinfo.3 +++ b/librdmacm/man/rdma_getaddrinfo.3
@@ -26,37 +26,9 @@ information needed to establish communication. Provides the RDMA functional equivalent to getaddrinfo. .SH "RETURN VALUE" -Returns 0 on success, or -1 on error (errno will be set to indicate the failure -reason), or one of the following nonzero error codes: -.IP "EAI_ADDRFAMILY" 12 -The specified network host does not have any network addresses in the -requested address family. -.IP "EAI_AGAIN" 12 -The name server returned a temporary failure indication. Try again later. -.IP "EAI_BADFLAGS" 12 -hints.ai_flags contains invalid flags. -.IP "EAI_FAIL" 12 -The name server returned a permanent failure indication. -.IP "EAI_FAMILY" 12 -The requested address family is not supported. -.IP "EAI_MEMORY" 12 -Out of memory. -.IP "EAI_NODATA" 12 -The specified network host exists, but does not have any network addresses -defined. -.IP "EAI_NONAME" 12 -The node or service is not known; or both node and service are NULL. -.IP "EAI_SERVICE" 12 -The requested service is not available for the requested QP type. It may be -available through another QP type. -.IP "EAI_QPTYPE" 12 -The requested socket type is not supported. This could occur, for example, -if hints.ai_qptype and hints.ai_port_space are inconsistent (e.g., IBV_QPT_UD -and RDMA_PS_TCP, respectively). -.IP "EAI_SYSTEM" 12 -Other system error, check errno for details. -The gai_strerror() function translates these error codes to a human readable -string, suitable for error reporting. +Returns 0 on success. On failure it returns either -1 with errno set to +indicate the internal error, or one of the nonzero EAI_* error codes +returned by getaddrinfo(3) if the node or service could not be resolved. .SH "NOTES" Either node, service, or hints must be provided. If hints are provided, the operation will be controlled by hints.ai_flags. If RAI_PASSIVE is
diff --git a/librdmacm/man/rdma_post_sendv.3 b/librdmacm/man/rdma_post_sendv.3 index 9b347b1..e1c888e 100644 --- a/librdmacm/man/rdma_post_sendv.3 +++ b/librdmacm/man/rdma_post_sendv.3
@@ -8,7 +8,7 @@ .B "int" rdma_post_sendv .BI "(struct rdma_cm_id *" id "," .BI "void *" context "," -.BI "struct ibv_sge *" slg "," +.BI "struct ibv_sge *" sgl "," .BI "int " nsge "," .BI "int " flags ");" .SH ARGUMENTS @@ -17,10 +17,10 @@ will be posted. .IP "context" 12 User-defined context associated with the request. -.IP "slg" 12 +.IP "sgl" 12 A scatter-gather list of memory buffers posted as a single request. .IP "nsge" 12 -The number of scatter-gather entries in the slg array. +The number of scatter-gather entries in the sgl array. .IP "flags" 12 Optional flags used to control the send operation. .SH "DESCRIPTION"
diff --git a/librdmacm/man/rsocket.7.in b/librdmacm/man/rsocket.7.in index 22c70b6..fc8f821 100644 --- a/librdmacm/man/rsocket.7.in +++ b/librdmacm/man/rsocket.7.in
@@ -153,8 +153,6 @@ This value is used to safe guard against potential application hangs in rpoll(). .P -max_events - maximum number of events for the epoll thread to handle for an epoll_instance. -.P All configuration files should contain a single integer value. Values may be set by issuing a command similar to the following example. .P
diff --git a/providers/rxe/man/rxe.7 b/providers/rxe/man/rxe.7 index 474ffff..32495ed 100644 --- a/providers/rxe/man/rxe.7 +++ b/providers/rxe/man/rxe.7
@@ -24,10 +24,6 @@ Directory that holds RDMA device information. The format is the same as other RDMA devices. .TP -\fB/sys/module/rdma_rxe_net/parameters/mtu\fR -Write only file used to configure RoCE and Ethernet MTU values. - -.TP \fB/sys/module/rdma_rxe/parameters/max_ucontext\fR Read/Write file that sets a limit on the number of UCs allowed per RXE device.