modules/tests/src/test/resources/testxml/validate/TestRelatePP.xml

<run>
<precisionModel type="FLOATING"/>

<case>
<desc>P/P: same point [dim(0){A.P.Int = B.P.Int}]</desc>
  <a>
    POINT(20 20)
  </a>
  <b>
    POINT(20 20)
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0FFFFFFF2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">true</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">true</op></test>
  <test><op name="covers"     arg1="A" arg2="B">true</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">true</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">true</op></test>
</case>

<case>
<desc>P/P: different point [dim(0){A.P.Int = B.P.Ext}]</desc>
  <a>
    POINT(20 20)
  </a>
  <b>
    POINT(40 60)
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="FF0FFF0F2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">false</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">false</op></test>
  <test><op name="covers"     arg1="A" arg2="B">false</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">true</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">false</op></test>
  <test><op name="intersects" arg1="A" arg2="B">false</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">false</op></test>
</case>

<case>
<desc>P/mP: different points [dim(0){A.P.Int = B.3P.Ext}]</desc>
  <a>
    POINT(40 40)
  </a>
  <b>
    MULTIPOINT((20 20), (80 80), (20 120))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="FF0FFF0F2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">false</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">false</op></test>
  <test><op name="covers"     arg1="A" arg2="B">false</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">true</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">false</op></test>
  <test><op name="intersects" arg1="A" arg2="B">false</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">false</op></test>
</case>

<case>
<desc>P/mP: point A within one of B points [dim(0){A.P.Int = B.3P1.Int}]</desc>
  <a>
    POINT(20 20)
  </a>
  <b>
    MULTIPOINT((20 20), (80 80), (20 120))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0FFFFF0F2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">false</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">true</op></test>
  <test><op name="covers"     arg1="A" arg2="B">false</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">false</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">true</op></test>
</case>

<case>
<desc>mP/mP-1-1: same points [dim(0){A.3P1.Int = B.3P1.Int}, dim(0){A.3P2.Int = B.3P2.Int}, dim(0){A.3P3.Int = B.3P3.Int}]</desc>
  <a>
    MULTIPOINT((40 40), (80 60), (120 100))
  </a>
  <b>
    MULTIPOINT((40 40), (80 60), (120 100))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0FFFFFFF2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">true</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">true</op></test>
  <test><op name="covers"     arg1="A" arg2="B">true</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">true</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">true</op></test>
</case>

<case>
<desc>mP/mP-1-2: same but different sequence of points [dim(0){A.3P1.Int = B.3P1.Int}, dim(0){A.3P1.Int = B.3P3.Int}, dim(0){A.3P3.Int = B.3P2.Int}]</desc>
  <a>
    MULTIPOINT((40 40), (80 60), (120 100))
  </a>
  <b>
    MULTIPOINT((40 40), (120 100), (80 60))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0FFFFFFF2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">true</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">true</op></test>
  <test><op name="covers"     arg1="A" arg2="B">true</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">true</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">true</op></test>
</case>

<case>
<desc>mP/mP-2: different points [dim(0){A.4P.Int = B.4P.Ext}]</desc>
  <a>
    MULTIPOINT((40 40), (60 100), (100 60), (120 120))
  </a>
  <b>
    MULTIPOINT((20 120), (60 60), (100 100), (140 40))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="FF0FFF0F2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">false</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">false</op></test>
  <test><op name="covers"     arg1="A" arg2="B">false</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">true</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">false</op></test>
  <test><op name="intersects" arg1="A" arg2="B">false</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">false</op></test>
</case>

<case>
<desc>mP/mP-5-1: same points [dim(0){A.4P.Int = B.4P.Int}]</desc>
  <a>
    MULTIPOINT((20 20), (80 70), (140 120), (200 170))
  </a>
  <b>
    MULTIPOINT((20 20), (80 70), (140 120), (200 170))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0FFFFFFF2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">true</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">true</op></test>
  <test><op name="covers"     arg1="A" arg2="B">true</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">true</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">true</op></test>
</case>

<case>
<desc>mP/mP-5-2: same points but different sequence [dim(0){A.4P.Int = B.4P.Int}]</desc>
  <a>
    MULTIPOINT((20 20), (140 120), (80 70), (200 170))
  </a>
  <b>
    MULTIPOINT((80 70), (20 20), (200 170), (140 120))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0FFFFFFF2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">true</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">true</op></test>
  <test><op name="covers"     arg1="A" arg2="B">true</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">true</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">true</op></test>
</case>

<case>
<desc>mP/mP-5-3: some points same [dim(0){A.4P2.Int = B.2P1.Int}, dim(0){A.4P3.Int = B.2P2.Int}]</desc>
  <a>
    MULTIPOINT((20 20), (80 70), (140 120), (200 170))
  </a>
  <b>
    MULTIPOINT((80 70), (140 120))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0F0FFFFF2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">true</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">false</op></test>
  <test><op name="covers"     arg1="A" arg2="B">true</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">false</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">false</op></test>
</case>

<case>
<desc>mP/mP-5-4: some points same, in a different sequence [dim(0){A.4P1.Int = B.2P2.Int}, dim(0){A.4P4.Int = B.2P1.Int}]</desc>
  <a>
    MULTIPOINT((80 70), (20 200), (200 170), (140 120))
  </a>
  <b>
    MULTIPOINT((140 120), (80 70))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0F0FFFFF2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">true</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">false</op></test>
  <test><op name="covers"     arg1="A" arg2="B">true</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">false</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">false</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">false</op></test>
</case>

<case>
<desc>mP/mP-6-1: some points same, some different [dim(0){A.4P4.Int = B.3P2.Int}]</desc>
  <a>
    MULTIPOINT((80 70), (20 20), (200 170), (140 120))
  </a>
  <b>
    MULTIPOINT((80 170), (140 120), (200 80))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0F0FFF0F2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">false</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">false</op></test>
  <test><op name="covers"     arg1="A" arg2="B">false</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">false</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">true</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">false</op></test>
</case>

<case>
<desc>mP/mP-6-2: dim(0){A.4P1.Int = B.4P4.Int}, dim(0){A.4P4.Int = B.4P2.Int}</desc>
  <a>
    MULTIPOINT((80 70), (20 20), (200 170), (140 120))
  </a>
  <b>
    MULTIPOINT((80 170), (140 120), (200 80), (80 70))
  </b>
  <test>
    <op name="relate" arg1="A" arg2="B" arg3="0F0FFF0F2">true</op>
  </test>
  <test><op name="contains"   arg1="A" arg2="B">false</op></test>
  <test><op name="coveredBy"  arg1="A" arg2="B">false</op></test>
  <test><op name="covers"     arg1="A" arg2="B">false</op></test>
  <test><op name="crosses"    arg1="A" arg2="B">false</op></test>
  <test><op name="disjoint"   arg1="A" arg2="B">false</op></test>
  <test><op name="equalsTopo" arg1="A" arg2="B">false</op></test>
  <test><op name="intersects" arg1="A" arg2="B">true</op></test>
  <test><op name="overlaps"   arg1="A" arg2="B">true</op></test>
  <test><op name="touches"    arg1="A" arg2="B">false</op></test>
  <test><op name="within"     arg1="A" arg2="B">false</op></test>
</case>

</run>