| # generated automatically by aclocal 1.14.1 -*- Autoconf -*- |
| |
| # Copyright (C) 1996-2013 Free Software Foundation, Inc. |
| |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) |
| m4_ifndef([AC_AUTOCONF_VERSION], |
| [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl |
| m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, |
| [m4_warning([this file was generated for autoconf 2.69. |
| You have another version of autoconf. It may work, but is not guaranteed to. |
| If you have problems, you may need to regenerate the build system entirely. |
| To do so, use the procedure documented by the package, typically 'autoreconf'.])]) |
| |
| # Copyright (C) 2002-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_AUTOMAKE_VERSION(VERSION) |
| # ---------------------------- |
| # Automake X.Y traces this macro to ensure aclocal.m4 has been |
| # generated from the m4 files accompanying Automake X.Y. |
| # (This private macro should not be called outside this file.) |
| AC_DEFUN([AM_AUTOMAKE_VERSION], |
| [am__api_version='1.14' |
| dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to |
| dnl require some minimum version. Point them to the right macro. |
| m4_if([$1], [1.14.1], [], |
| [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl |
| ]) |
| |
| # _AM_AUTOCONF_VERSION(VERSION) |
| # ----------------------------- |
| # aclocal traces this macro to find the Autoconf version. |
| # This is a private macro too. Using m4_define simplifies |
| # the logic in aclocal, which can simply ignore this definition. |
| m4_define([_AM_AUTOCONF_VERSION], []) |
| |
| # AM_SET_CURRENT_AUTOMAKE_VERSION |
| # ------------------------------- |
| # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. |
| # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. |
| AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], |
| [AM_AUTOMAKE_VERSION([1.14.1])dnl |
| m4_ifndef([AC_AUTOCONF_VERSION], |
| [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl |
| _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) |
| |
| # AM_AUX_DIR_EXPAND -*- Autoconf -*- |
| |
| # Copyright (C) 2001-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets |
| # $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to |
| # '$srcdir', '$srcdir/..', or '$srcdir/../..'. |
| # |
| # Of course, Automake must honor this variable whenever it calls a |
| # tool from the auxiliary directory. The problem is that $srcdir (and |
| # therefore $ac_aux_dir as well) can be either absolute or relative, |
| # depending on how configure is run. This is pretty annoying, since |
| # it makes $ac_aux_dir quite unusable in subdirectories: in the top |
| # source directory, any form will work fine, but in subdirectories a |
| # relative path needs to be adjusted first. |
| # |
| # $ac_aux_dir/missing |
| # fails when called from a subdirectory if $ac_aux_dir is relative |
| # $top_srcdir/$ac_aux_dir/missing |
| # fails if $ac_aux_dir is absolute, |
| # fails when called from a subdirectory in a VPATH build with |
| # a relative $ac_aux_dir |
| # |
| # The reason of the latter failure is that $top_srcdir and $ac_aux_dir |
| # are both prefixed by $srcdir. In an in-source build this is usually |
| # harmless because $srcdir is '.', but things will broke when you |
| # start a VPATH build or use an absolute $srcdir. |
| # |
| # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, |
| # iff we strip the leading $srcdir from $ac_aux_dir. That would be: |
| # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` |
| # and then we would define $MISSING as |
| # MISSING="\${SHELL} $am_aux_dir/missing" |
| # This will work as long as MISSING is not called from configure, because |
| # unfortunately $(top_srcdir) has no meaning in configure. |
| # However there are other variables, like CC, which are often used in |
| # configure, and could therefore not use this "fixed" $ac_aux_dir. |
| # |
| # Another solution, used here, is to always expand $ac_aux_dir to an |
| # absolute PATH. The drawback is that using absolute paths prevent a |
| # configured tree to be moved without reconfiguration. |
| |
| AC_DEFUN([AM_AUX_DIR_EXPAND], |
| [dnl Rely on autoconf to set up CDPATH properly. |
| AC_PREREQ([2.50])dnl |
| # expand $ac_aux_dir to an absolute path |
| am_aux_dir=`cd $ac_aux_dir && pwd` |
| ]) |
| |
| # AM_COND_IF -*- Autoconf -*- |
| |
| # Copyright (C) 2008-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_COND_IF |
| # _AM_COND_ELSE |
| # _AM_COND_ENDIF |
| # -------------- |
| # These macros are only used for tracing. |
| m4_define([_AM_COND_IF]) |
| m4_define([_AM_COND_ELSE]) |
| m4_define([_AM_COND_ENDIF]) |
| |
| # AM_COND_IF(COND, [IF-TRUE], [IF-FALSE]) |
| # --------------------------------------- |
| # If the shell condition COND is true, execute IF-TRUE, otherwise execute |
| # IF-FALSE. Allow automake to learn about conditional instantiating macros |
| # (the AC_CONFIG_FOOS). |
| AC_DEFUN([AM_COND_IF], |
| [m4_ifndef([_AM_COND_VALUE_$1], |
| [m4_fatal([$0: no such condition "$1"])])dnl |
| _AM_COND_IF([$1])dnl |
| if test -z "$$1_TRUE"; then : |
| m4_n([$2])[]dnl |
| m4_ifval([$3], |
| [_AM_COND_ELSE([$1])dnl |
| else |
| $3 |
| ])dnl |
| _AM_COND_ENDIF([$1])dnl |
| fi[]dnl |
| ]) |
| |
| # AM_CONDITIONAL -*- Autoconf -*- |
| |
| # Copyright (C) 1997-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_CONDITIONAL(NAME, SHELL-CONDITION) |
| # ------------------------------------- |
| # Define a conditional. |
| AC_DEFUN([AM_CONDITIONAL], |
| [AC_PREREQ([2.52])dnl |
| m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], |
| [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl |
| AC_SUBST([$1_TRUE])dnl |
| AC_SUBST([$1_FALSE])dnl |
| _AM_SUBST_NOTMAKE([$1_TRUE])dnl |
| _AM_SUBST_NOTMAKE([$1_FALSE])dnl |
| m4_define([_AM_COND_VALUE_$1], [$2])dnl |
| if $2; then |
| $1_TRUE= |
| $1_FALSE='#' |
| else |
| $1_TRUE='#' |
| $1_FALSE= |
| fi |
| AC_CONFIG_COMMANDS_PRE( |
| [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then |
| AC_MSG_ERROR([[conditional "$1" was never defined. |
| Usually this means the macro was only invoked conditionally.]]) |
| fi])]) |
| |
| # Do all the work for Automake. -*- Autoconf -*- |
| |
| # Copyright (C) 1996-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This macro actually does too much. Some checks are only needed if |
| # your package does certain things. But this isn't really a big deal. |
| |
| dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. |
| m4_define([AC_PROG_CC], |
| m4_defn([AC_PROG_CC]) |
| [_AM_PROG_CC_C_O |
| ]) |
| |
| # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) |
| # AM_INIT_AUTOMAKE([OPTIONS]) |
| # ----------------------------------------------- |
| # The call with PACKAGE and VERSION arguments is the old style |
| # call (pre autoconf-2.50), which is being phased out. PACKAGE |
| # and VERSION should now be passed to AC_INIT and removed from |
| # the call to AM_INIT_AUTOMAKE. |
| # We support both call styles for the transition. After |
| # the next Automake release, Autoconf can make the AC_INIT |
| # arguments mandatory, and then we can depend on a new Autoconf |
| # release and drop the old call support. |
| AC_DEFUN([AM_INIT_AUTOMAKE], |
| [AC_PREREQ([2.65])dnl |
| dnl Autoconf wants to disallow AM_ names. We explicitly allow |
| dnl the ones we care about. |
| m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl |
| AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl |
| AC_REQUIRE([AC_PROG_INSTALL])dnl |
| if test "`cd $srcdir && pwd`" != "`pwd`"; then |
| # Use -I$(srcdir) only when $(srcdir) != ., so that make's output |
| # is not polluted with repeated "-I." |
| AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl |
| # test to see if srcdir already configured |
| if test -f $srcdir/config.status; then |
| AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) |
| fi |
| fi |
| |
| # test whether we have cygpath |
| if test -z "$CYGPATH_W"; then |
| if (cygpath --version) >/dev/null 2>/dev/null; then |
| CYGPATH_W='cygpath -w' |
| else |
| CYGPATH_W=echo |
| fi |
| fi |
| AC_SUBST([CYGPATH_W]) |
| |
| # Define the identity of the package. |
| dnl Distinguish between old-style and new-style calls. |
| m4_ifval([$2], |
| [AC_DIAGNOSE([obsolete], |
| [$0: two- and three-arguments forms are deprecated.]) |
| m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl |
| AC_SUBST([PACKAGE], [$1])dnl |
| AC_SUBST([VERSION], [$2])], |
| [_AM_SET_OPTIONS([$1])dnl |
| dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. |
| m4_if( |
| m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), |
| [ok:ok],, |
| [m4_fatal([AC_INIT should be called with package and version arguments])])dnl |
| AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl |
| AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl |
| |
| _AM_IF_OPTION([no-define],, |
| [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) |
| AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl |
| |
| # Some tools Automake needs. |
| AC_REQUIRE([AM_SANITY_CHECK])dnl |
| AC_REQUIRE([AC_ARG_PROGRAM])dnl |
| AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) |
| AM_MISSING_PROG([AUTOCONF], [autoconf]) |
| AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) |
| AM_MISSING_PROG([AUTOHEADER], [autoheader]) |
| AM_MISSING_PROG([MAKEINFO], [makeinfo]) |
| AC_REQUIRE([AM_PROG_INSTALL_SH])dnl |
| AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl |
| AC_REQUIRE([AC_PROG_MKDIR_P])dnl |
| # For better backward compatibility. To be removed once Automake 1.9.x |
| # dies out for good. For more background, see: |
| # <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> |
| # <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> |
| AC_SUBST([mkdir_p], ['$(MKDIR_P)']) |
| # We need awk for the "check" target. The system "awk" is bad on |
| # some platforms. |
| AC_REQUIRE([AC_PROG_AWK])dnl |
| AC_REQUIRE([AC_PROG_MAKE_SET])dnl |
| AC_REQUIRE([AM_SET_LEADING_DOT])dnl |
| _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], |
| [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], |
| [_AM_PROG_TAR([v7])])]) |
| _AM_IF_OPTION([no-dependencies],, |
| [AC_PROVIDE_IFELSE([AC_PROG_CC], |
| [_AM_DEPENDENCIES([CC])], |
| [m4_define([AC_PROG_CC], |
| m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl |
| AC_PROVIDE_IFELSE([AC_PROG_CXX], |
| [_AM_DEPENDENCIES([CXX])], |
| [m4_define([AC_PROG_CXX], |
| m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl |
| AC_PROVIDE_IFELSE([AC_PROG_OBJC], |
| [_AM_DEPENDENCIES([OBJC])], |
| [m4_define([AC_PROG_OBJC], |
| m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl |
| AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], |
| [_AM_DEPENDENCIES([OBJCXX])], |
| [m4_define([AC_PROG_OBJCXX], |
| m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl |
| ]) |
| AC_REQUIRE([AM_SILENT_RULES])dnl |
| dnl The testsuite driver may need to know about EXEEXT, so add the |
| dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This |
| dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. |
| AC_CONFIG_COMMANDS_PRE(dnl |
| [m4_provide_if([_AM_COMPILER_EXEEXT], |
| [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl |
| |
| # POSIX will say in a future version that running "rm -f" with no argument |
| # is OK; and we want to be able to make that assumption in our Makefile |
| # recipes. So use an aggressive probe to check that the usage we want is |
| # actually supported "in the wild" to an acceptable degree. |
| # See automake bug#10828. |
| # To make any issue more visible, cause the running configure to be aborted |
| # by default if the 'rm' program in use doesn't match our expectations; the |
| # user can still override this though. |
| if rm -f && rm -fr && rm -rf; then : OK; else |
| cat >&2 <<'END' |
| Oops! |
| |
| Your 'rm' program seems unable to run without file operands specified |
| on the command line, even when the '-f' option is present. This is contrary |
| to the behaviour of most rm programs out there, and not conforming with |
| the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542> |
| |
| Please tell bug-automake@gnu.org about your system, including the value |
| of your $PATH and any error possibly output before this message. This |
| can help us improve future automake versions. |
| |
| END |
| if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then |
| echo 'Configuration will proceed anyway, since you have set the' >&2 |
| echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 |
| echo >&2 |
| else |
| cat >&2 <<'END' |
| Aborting the configuration process, to ensure you take notice of the issue. |
| |
| You can download and install GNU coreutils to get an 'rm' implementation |
| that behaves properly: <http://www.gnu.org/software/coreutils/>. |
| |
| If you want to complete the configuration process using your problematic |
| 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM |
| to "yes", and re-run configure. |
| |
| END |
| AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) |
| fi |
| fi]) |
| |
| dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not |
| dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further |
| dnl mangled by Autoconf and run in a shell conditional statement. |
| m4_define([_AC_COMPILER_EXEEXT], |
| m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) |
| |
| # When config.status generates a header, we must update the stamp-h file. |
| # This file resides in the same directory as the config header |
| # that is generated. The stamp files are numbered to have different names. |
| |
| # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the |
| # loop where config.status creates the headers, so we can generate |
| # our stamp files there. |
| AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], |
| [# Compute $1's index in $config_headers. |
| _am_arg=$1 |
| _am_stamp_count=1 |
| for _am_header in $config_headers :; do |
| case $_am_header in |
| $_am_arg | $_am_arg:* ) |
| break ;; |
| * ) |
| _am_stamp_count=`expr $_am_stamp_count + 1` ;; |
| esac |
| done |
| echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) |
| |
| # Copyright (C) 2001-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_PROG_INSTALL_SH |
| # ------------------ |
| # Define $install_sh. |
| AC_DEFUN([AM_PROG_INSTALL_SH], |
| [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl |
| if test x"${install_sh}" != xset; then |
| case $am_aux_dir in |
| *\ * | *\ *) |
| install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; |
| *) |
| install_sh="\${SHELL} $am_aux_dir/install-sh" |
| esac |
| fi |
| AC_SUBST([install_sh])]) |
| |
| # Copyright (C) 2003-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # Check whether the underlying file-system supports filenames |
| # with a leading dot. For instance MS-DOS doesn't. |
| AC_DEFUN([AM_SET_LEADING_DOT], |
| [rm -rf .tst 2>/dev/null |
| mkdir .tst 2>/dev/null |
| if test -d .tst; then |
| am__leading_dot=. |
| else |
| am__leading_dot=_ |
| fi |
| rmdir .tst 2>/dev/null |
| AC_SUBST([am__leading_dot])]) |
| |
| # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- |
| # From Jim Meyering |
| |
| # Copyright (C) 1996-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_MAINTAINER_MODE([DEFAULT-MODE]) |
| # ---------------------------------- |
| # Control maintainer-specific portions of Makefiles. |
| # Default is to disable them, unless 'enable' is passed literally. |
| # For symmetry, 'disable' may be passed as well. Anyway, the user |
| # can override the default with the --enable/--disable switch. |
| AC_DEFUN([AM_MAINTAINER_MODE], |
| [m4_case(m4_default([$1], [disable]), |
| [enable], [m4_define([am_maintainer_other], [disable])], |
| [disable], [m4_define([am_maintainer_other], [enable])], |
| [m4_define([am_maintainer_other], [enable]) |
| m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) |
| AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) |
| dnl maintainer-mode's default is 'disable' unless 'enable' is passed |
| AC_ARG_ENABLE([maintainer-mode], |
| [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], |
| am_maintainer_other[ make rules and dependencies not useful |
| (and sometimes confusing) to the casual installer])], |
| [USE_MAINTAINER_MODE=$enableval], |
| [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) |
| AC_MSG_RESULT([$USE_MAINTAINER_MODE]) |
| AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) |
| MAINT=$MAINTAINER_MODE_TRUE |
| AC_SUBST([MAINT])dnl |
| ] |
| ) |
| |
| # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- |
| |
| # Copyright (C) 1997-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_MISSING_PROG(NAME, PROGRAM) |
| # ------------------------------ |
| AC_DEFUN([AM_MISSING_PROG], |
| [AC_REQUIRE([AM_MISSING_HAS_RUN]) |
| $1=${$1-"${am_missing_run}$2"} |
| AC_SUBST($1)]) |
| |
| # AM_MISSING_HAS_RUN |
| # ------------------ |
| # Define MISSING if not defined so far and test if it is modern enough. |
| # If it is, set am_missing_run to use it, otherwise, to nothing. |
| AC_DEFUN([AM_MISSING_HAS_RUN], |
| [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl |
| AC_REQUIRE_AUX_FILE([missing])dnl |
| if test x"${MISSING+set}" != xset; then |
| case $am_aux_dir in |
| *\ * | *\ *) |
| MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; |
| *) |
| MISSING="\${SHELL} $am_aux_dir/missing" ;; |
| esac |
| fi |
| # Use eval to expand $SHELL |
| if eval "$MISSING --is-lightweight"; then |
| am_missing_run="$MISSING " |
| else |
| am_missing_run= |
| AC_MSG_WARN(['missing' script is too old or missing]) |
| fi |
| ]) |
| |
| # Helper functions for option handling. -*- Autoconf -*- |
| |
| # Copyright (C) 2001-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_MANGLE_OPTION(NAME) |
| # ----------------------- |
| AC_DEFUN([_AM_MANGLE_OPTION], |
| [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) |
| |
| # _AM_SET_OPTION(NAME) |
| # -------------------- |
| # Set option NAME. Presently that only means defining a flag for this option. |
| AC_DEFUN([_AM_SET_OPTION], |
| [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) |
| |
| # _AM_SET_OPTIONS(OPTIONS) |
| # ------------------------ |
| # OPTIONS is a space-separated list of Automake options. |
| AC_DEFUN([_AM_SET_OPTIONS], |
| [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) |
| |
| # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) |
| # ------------------------------------------- |
| # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. |
| AC_DEFUN([_AM_IF_OPTION], |
| [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) |
| |
| # Check to make sure that the build environment is sane. -*- Autoconf -*- |
| |
| # Copyright (C) 1996-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_SANITY_CHECK |
| # --------------- |
| AC_DEFUN([AM_SANITY_CHECK], |
| [AC_MSG_CHECKING([whether build environment is sane]) |
| # Reject unsafe characters in $srcdir or the absolute working directory |
| # name. Accept space and tab only in the latter. |
| am_lf=' |
| ' |
| case `pwd` in |
| *[[\\\"\#\$\&\'\`$am_lf]]*) |
| AC_MSG_ERROR([unsafe absolute working directory name]);; |
| esac |
| case $srcdir in |
| *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) |
| AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; |
| esac |
| |
| # Do 'set' in a subshell so we don't clobber the current shell's |
| # arguments. Must try -L first in case configure is actually a |
| # symlink; some systems play weird games with the mod time of symlinks |
| # (eg FreeBSD returns the mod time of the symlink's containing |
| # directory). |
| if ( |
| am_has_slept=no |
| for am_try in 1 2; do |
| echo "timestamp, slept: $am_has_slept" > conftest.file |
| set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` |
| if test "$[*]" = "X"; then |
| # -L didn't work. |
| set X `ls -t "$srcdir/configure" conftest.file` |
| fi |
| if test "$[*]" != "X $srcdir/configure conftest.file" \ |
| && test "$[*]" != "X conftest.file $srcdir/configure"; then |
| |
| # If neither matched, then we have a broken ls. This can happen |
| # if, for instance, CONFIG_SHELL is bash and it inherits a |
| # broken ls alias from the environment. This has actually |
| # happened. Such a system could not be considered "sane". |
| AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken |
| alias in your environment]) |
| fi |
| if test "$[2]" = conftest.file || test $am_try -eq 2; then |
| break |
| fi |
| # Just in case. |
| sleep 1 |
| am_has_slept=yes |
| done |
| test "$[2]" = conftest.file |
| ) |
| then |
| # Ok. |
| : |
| else |
| AC_MSG_ERROR([newly created file is older than distributed files! |
| Check your system clock]) |
| fi |
| AC_MSG_RESULT([yes]) |
| # If we didn't sleep, we still need to ensure time stamps of config.status and |
| # generated files are strictly newer. |
| am_sleep_pid= |
| if grep 'slept: no' conftest.file >/dev/null 2>&1; then |
| ( sleep 1 ) & |
| am_sleep_pid=$! |
| fi |
| AC_CONFIG_COMMANDS_PRE( |
| [AC_MSG_CHECKING([that generated files are newer than configure]) |
| if test -n "$am_sleep_pid"; then |
| # Hide warnings about reused PIDs. |
| wait $am_sleep_pid 2>/dev/null |
| fi |
| AC_MSG_RESULT([done])]) |
| rm -f conftest.file |
| ]) |
| |
| # Copyright (C) 2009-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_SILENT_RULES([DEFAULT]) |
| # -------------------------- |
| # Enable less verbose build rules; with the default set to DEFAULT |
| # ("yes" being less verbose, "no" or empty being verbose). |
| AC_DEFUN([AM_SILENT_RULES], |
| [AC_ARG_ENABLE([silent-rules], [dnl |
| AS_HELP_STRING( |
| [--enable-silent-rules], |
| [less verbose build output (undo: "make V=1")]) |
| AS_HELP_STRING( |
| [--disable-silent-rules], |
| [verbose build output (undo: "make V=0")])dnl |
| ]) |
| case $enable_silent_rules in @%:@ ((( |
| yes) AM_DEFAULT_VERBOSITY=0;; |
| no) AM_DEFAULT_VERBOSITY=1;; |
| *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; |
| esac |
| dnl |
| dnl A few 'make' implementations (e.g., NonStop OS and NextStep) |
| dnl do not support nested variable expansions. |
| dnl See automake bug#9928 and bug#10237. |
| am_make=${MAKE-make} |
| AC_CACHE_CHECK([whether $am_make supports nested variables], |
| [am_cv_make_support_nested_variables], |
| [if AS_ECHO([['TRUE=$(BAR$(V)) |
| BAR0=false |
| BAR1=true |
| V=1 |
| am__doit: |
| @$(TRUE) |
| .PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then |
| am_cv_make_support_nested_variables=yes |
| else |
| am_cv_make_support_nested_variables=no |
| fi]) |
| if test $am_cv_make_support_nested_variables = yes; then |
| dnl Using '$V' instead of '$(V)' breaks IRIX make. |
| AM_V='$(V)' |
| AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' |
| else |
| AM_V=$AM_DEFAULT_VERBOSITY |
| AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY |
| fi |
| AC_SUBST([AM_V])dnl |
| AM_SUBST_NOTMAKE([AM_V])dnl |
| AC_SUBST([AM_DEFAULT_V])dnl |
| AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl |
| AC_SUBST([AM_DEFAULT_VERBOSITY])dnl |
| AM_BACKSLASH='\' |
| AC_SUBST([AM_BACKSLASH])dnl |
| _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl |
| ]) |
| |
| # Copyright (C) 2001-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # AM_PROG_INSTALL_STRIP |
| # --------------------- |
| # One issue with vendor 'install' (even GNU) is that you can't |
| # specify the program used to strip binaries. This is especially |
| # annoying in cross-compiling environments, where the build's strip |
| # is unlikely to handle the host's binaries. |
| # Fortunately install-sh will honor a STRIPPROG variable, so we |
| # always use install-sh in "make install-strip", and initialize |
| # STRIPPROG with the value of the STRIP variable (set by the user). |
| AC_DEFUN([AM_PROG_INSTALL_STRIP], |
| [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl |
| # Installed binaries are usually stripped using 'strip' when the user |
| # run "make install-strip". However 'strip' might not be the right |
| # tool to use in cross-compilation environments, therefore Automake |
| # will honor the 'STRIP' environment variable to overrule this program. |
| dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. |
| if test "$cross_compiling" != no; then |
| AC_CHECK_TOOL([STRIP], [strip], :) |
| fi |
| INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" |
| AC_SUBST([INSTALL_STRIP_PROGRAM])]) |
| |
| # Copyright (C) 2006-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_SUBST_NOTMAKE(VARIABLE) |
| # --------------------------- |
| # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. |
| # This macro is traced by Automake. |
| AC_DEFUN([_AM_SUBST_NOTMAKE]) |
| |
| # AM_SUBST_NOTMAKE(VARIABLE) |
| # -------------------------- |
| # Public sister of _AM_SUBST_NOTMAKE. |
| AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) |
| |
| # Check how to create a tarball. -*- Autoconf -*- |
| |
| # Copyright (C) 2004-2013 Free Software Foundation, Inc. |
| # |
| # This file is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # _AM_PROG_TAR(FORMAT) |
| # -------------------- |
| # Check how to create a tarball in format FORMAT. |
| # FORMAT should be one of 'v7', 'ustar', or 'pax'. |
| # |
| # Substitute a variable $(am__tar) that is a command |
| # writing to stdout a FORMAT-tarball containing the directory |
| # $tardir. |
| # tardir=directory && $(am__tar) > result.tar |
| # |
| # Substitute a variable $(am__untar) that extract such |
| # a tarball read from stdin. |
| # $(am__untar) < result.tar |
| # |
| AC_DEFUN([_AM_PROG_TAR], |
| [# Always define AMTAR for backward compatibility. Yes, it's still used |
| # in the wild :-( We should find a proper way to deprecate it ... |
| AC_SUBST([AMTAR], ['$${TAR-tar}']) |
| |
| # We'll loop over all known methods to create a tar archive until one works. |
| _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' |
| |
| m4_if([$1], [v7], |
| [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], |
| |
| [m4_case([$1], |
| [ustar], |
| [# The POSIX 1988 'ustar' format is defined with fixed-size fields. |
| # There is notably a 21 bits limit for the UID and the GID. In fact, |
| # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 |
| # and bug#13588). |
| am_max_uid=2097151 # 2^21 - 1 |
| am_max_gid=$am_max_uid |
| # The $UID and $GID variables are not portable, so we need to resort |
| # to the POSIX-mandated id(1) utility. Errors in the 'id' calls |
| # below are definitely unexpected, so allow the users to see them |
| # (that is, avoid stderr redirection). |
| am_uid=`id -u || echo unknown` |
| am_gid=`id -g || echo unknown` |
| AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) |
| if test $am_uid -le $am_max_uid; then |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no]) |
| _am_tools=none |
| fi |
| AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) |
| if test $am_gid -le $am_max_gid; then |
| AC_MSG_RESULT([yes]) |
| else |
| AC_MSG_RESULT([no]) |
| _am_tools=none |
| fi], |
| |
| [pax], |
| [], |
| |
| [m4_fatal([Unknown tar format])]) |
| |
| AC_MSG_CHECKING([how to create a $1 tar archive]) |
| |
| # Go ahead even if we have the value already cached. We do so because we |
| # need to set the values for the 'am__tar' and 'am__untar' variables. |
| _am_tools=${am_cv_prog_tar_$1-$_am_tools} |
| |
| for _am_tool in $_am_tools; do |
| case $_am_tool in |
| gnutar) |
| for _am_tar in tar gnutar gtar; do |
| AM_RUN_LOG([$_am_tar --version]) && break |
| done |
| am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' |
| am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' |
| am__untar="$_am_tar -xf -" |
| ;; |
| plaintar) |
| # Must skip GNU tar: if it does not support --format= it doesn't create |
| # ustar tarball either. |
| (tar --version) >/dev/null 2>&1 && continue |
| am__tar='tar chf - "$$tardir"' |
| am__tar_='tar chf - "$tardir"' |
| am__untar='tar xf -' |
| ;; |
| pax) |
| am__tar='pax -L -x $1 -w "$$tardir"' |
| am__tar_='pax -L -x $1 -w "$tardir"' |
| am__untar='pax -r' |
| ;; |
| cpio) |
| am__tar='find "$$tardir" -print | cpio -o -H $1 -L' |
| am__tar_='find "$tardir" -print | cpio -o -H $1 -L' |
| am__untar='cpio -i -H $1 -d' |
| ;; |
| none) |
| am__tar=false |
| am__tar_=false |
| am__untar=false |
| ;; |
| esac |
| |
| # If the value was cached, stop now. We just wanted to have am__tar |
| # and am__untar set. |
| test -n "${am_cv_prog_tar_$1}" && break |
| |
| # tar/untar a dummy directory, and stop if the command works. |
| rm -rf conftest.dir |
| mkdir conftest.dir |
| echo GrepMe > conftest.dir/file |
| AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) |
| rm -rf conftest.dir |
| if test -s conftest.tar; then |
| AM_RUN_LOG([$am__untar <conftest.tar]) |
| AM_RUN_LOG([cat conftest.dir/file]) |
| grep GrepMe conftest.dir/file >/dev/null 2>&1 && break |
| fi |
| done |
| rm -rf conftest.dir |
| |
| AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) |
| AC_MSG_RESULT([$am_cv_prog_tar_$1])]) |
| |
| AC_SUBST([am__tar]) |
| AC_SUBST([am__untar]) |
| ]) # _AM_PROG_TAR |
| |