| /* | |
| * Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved. | |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. | |
| * | |
| * This code is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 only, as | |
| * published by the Free Software Foundation. Oracle designates this | |
| * particular file as subject to the "Classpath" exception as provided | |
| * by Oracle in the LICENSE file that accompanied this code. | |
| * | |
| * This code is distributed in the hope that it will be useful, but WITHOUT | |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| * version 2 for more details (a copy is included in the LICENSE file that | |
| * accompanied this code). | |
| * | |
| * You should have received a copy of the GNU General Public License version | |
| * 2 along with this work; if not, write to the Free Software Foundation, | |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
| * | |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA | |
| * or visit www.oracle.com if you need additional information or have any | |
| * questions. | |
| */ | |
| /* | |
| * Copyright (c) 2012, Stephen Colebourne & Michael Nascimento Santos | |
| * | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * * Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * * Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * * Neither the name of JSR-310 nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR | |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR | |
| * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| package java.time.temporal; | |
| import java.time.Duration; | |
| /** | |
| * A standard set of date periods units. | |
| * <p> | |
| * This set of units provide unit-based access to manipulate a date, time or date-time. | |
| * The standard set of units can be extended by implementing {@link TemporalUnit}. | |
| * <p> | |
| * These units are intended to be applicable in multiple calendar systems. | |
| * For example, most non-ISO calendar systems define units of years, months and days, | |
| * just with slightly different rules. | |
| * The documentation of each unit explains how it operates. | |
| * | |
| * @implSpec | |
| * This is a final, immutable and thread-safe enum. | |
| * | |
| * @since 1.8 | |
| */ | |
| public enum ChronoUnit implements TemporalUnit { | |
| /** | |
| * Unit that represents the concept of a nanosecond, the smallest supported unit of time. | |
| * For the ISO calendar system, it is equal to the 1,000,000,000th part of the second unit. | |
| */ | |
| NANOS("Nanos", Duration.ofNanos(1)), | |
| /** | |
| * Unit that represents the concept of a microsecond. | |
| * For the ISO calendar system, it is equal to the 1,000,000th part of the second unit. | |
| */ | |
| MICROS("Micros", Duration.ofNanos(1000)), | |
| /** | |
| * Unit that represents the concept of a millisecond. | |
| * For the ISO calendar system, it is equal to the 1000th part of the second unit. | |
| */ | |
| MILLIS("Millis", Duration.ofNanos(1000_000)), | |
| /** | |
| * Unit that represents the concept of a second. | |
| * For the ISO calendar system, it is equal to the second in the SI system | |
| * of units, except around a leap-second. | |
| */ | |
| SECONDS("Seconds", Duration.ofSeconds(1)), | |
| /** | |
| * Unit that represents the concept of a minute. | |
| * For the ISO calendar system, it is equal to 60 seconds. | |
| */ | |
| MINUTES("Minutes", Duration.ofSeconds(60)), | |
| /** | |
| * Unit that represents the concept of an hour. | |
| * For the ISO calendar system, it is equal to 60 minutes. | |
| */ | |
| HOURS("Hours", Duration.ofSeconds(3600)), | |
| /** | |
| * Unit that represents the concept of half a day, as used in AM/PM. | |
| * For the ISO calendar system, it is equal to 12 hours. | |
| */ | |
| HALF_DAYS("HalfDays", Duration.ofSeconds(43200)), | |
| /** | |
| * Unit that represents the concept of a day. | |
| * For the ISO calendar system, it is the standard day from midnight to midnight. | |
| * The estimated duration of a day is {@code 24 Hours}. | |
| * <p> | |
| * When used with other calendar systems it must correspond to the day defined by | |
| * the rising and setting of the Sun on Earth. It is not required that days begin | |
| * at midnight - when converting between calendar systems, the date should be | |
| * equivalent at midday. | |
| */ | |
| DAYS("Days", Duration.ofSeconds(86400)), | |
| /** | |
| * Unit that represents the concept of a week. | |
| * For the ISO calendar system, it is equal to 7 days. | |
| * <p> | |
| * When used with other calendar systems it must correspond to an integral number of days. | |
| */ | |
| WEEKS("Weeks", Duration.ofSeconds(7 * 86400L)), | |
| /** | |
| * Unit that represents the concept of a month. | |
| * For the ISO calendar system, the length of the month varies by month-of-year. | |
| * The estimated duration of a month is one twelfth of {@code 365.2425 Days}. | |
| * <p> | |
| * When used with other calendar systems it must correspond to an integral number of days. | |
| */ | |
| MONTHS("Months", Duration.ofSeconds(31556952L / 12)), | |
| /** | |
| * Unit that represents the concept of a year. | |
| * For the ISO calendar system, it is equal to 12 months. | |
| * The estimated duration of a year is {@code 365.2425 Days}. | |
| * <p> | |
| * When used with other calendar systems it must correspond to an integral number of days | |
| * or months roughly equal to a year defined by the passage of the Earth around the Sun. | |
| */ | |
| YEARS("Years", Duration.ofSeconds(31556952L)), | |
| /** | |
| * Unit that represents the concept of a decade. | |
| * For the ISO calendar system, it is equal to 10 years. | |
| * <p> | |
| * When used with other calendar systems it must correspond to an integral number of days | |
| * and is normally an integral number of years. | |
| */ | |
| DECADES("Decades", Duration.ofSeconds(31556952L * 10L)), | |
| /** | |
| * Unit that represents the concept of a century. | |
| * For the ISO calendar system, it is equal to 100 years. | |
| * <p> | |
| * When used with other calendar systems it must correspond to an integral number of days | |
| * and is normally an integral number of years. | |
| */ | |
| CENTURIES("Centuries", Duration.ofSeconds(31556952L * 100L)), | |
| /** | |
| * Unit that represents the concept of a millennium. | |
| * For the ISO calendar system, it is equal to 1000 years. | |
| * <p> | |
| * When used with other calendar systems it must correspond to an integral number of days | |
| * and is normally an integral number of years. | |
| */ | |
| MILLENNIA("Millennia", Duration.ofSeconds(31556952L * 1000L)), | |
| /** | |
| * Unit that represents the concept of an era. | |
| * The ISO calendar system doesn't have eras thus it is impossible to add | |
| * an era to a date or date-time. | |
| * The estimated duration of the era is artificially defined as {@code 1,000,000,000 Years}. | |
| * <p> | |
| * When used with other calendar systems there are no restrictions on the unit. | |
| */ | |
| ERAS("Eras", Duration.ofSeconds(31556952L * 1000_000_000L)), | |
| /** | |
| * Artificial unit that represents the concept of forever. | |
| * This is primarily used with {@link TemporalField} to represent unbounded fields | |
| * such as the year or era. | |
| * The estimated duration of this unit is artificially defined as the largest duration | |
| * supported by {@link Duration}. | |
| */ | |
| FOREVER("Forever", Duration.ofSeconds(Long.MAX_VALUE, 999_999_999)); | |
| private final String name; | |
| private final Duration duration; | |
| private ChronoUnit(String name, Duration estimatedDuration) { | |
| this.name = name; | |
| this.duration = estimatedDuration; | |
| } | |
| //----------------------------------------------------------------------- | |
| /** | |
| * Gets the estimated duration of this unit in the ISO calendar system. | |
| * <p> | |
| * All of the units in this class have an estimated duration. | |
| * Days vary due to daylight saving time, while months have different lengths. | |
| * | |
| * @return the estimated duration of this unit, not null | |
| */ | |
| @Override | |
| public Duration getDuration() { | |
| return duration; | |
| } | |
| /** | |
| * Checks if the duration of the unit is an estimate. | |
| * <p> | |
| * All time units in this class are considered to be accurate, while all date | |
| * units in this class are considered to be estimated. | |
| * <p> | |
| * This definition ignores leap seconds, but considers that Days vary due to | |
| * daylight saving time and months have different lengths. | |
| * | |
| * @return true if the duration is estimated, false if accurate | |
| */ | |
| @Override | |
| public boolean isDurationEstimated() { | |
| return this.compareTo(DAYS) >= 0; | |
| } | |
| //----------------------------------------------------------------------- | |
| /** | |
| * Checks if this unit is a date unit. | |
| * <p> | |
| * All units from days to eras inclusive are date-based. | |
| * Time-based units and {@code FOREVER} return false. | |
| * | |
| * @return true if a date unit, false if a time unit | |
| */ | |
| @Override | |
| public boolean isDateBased() { | |
| return this.compareTo(DAYS) >= 0 && this != FOREVER; | |
| } | |
| /** | |
| * Checks if this unit is a time unit. | |
| * <p> | |
| * All units from nanos to half-days inclusive are time-based. | |
| * Date-based units and {@code FOREVER} return false. | |
| * | |
| * @return true if a time unit, false if a date unit | |
| */ | |
| @Override | |
| public boolean isTimeBased() { | |
| return this.compareTo(DAYS) < 0; | |
| } | |
| //----------------------------------------------------------------------- | |
| @Override | |
| public boolean isSupportedBy(Temporal temporal) { | |
| return temporal.isSupported(this); | |
| } | |
| @SuppressWarnings("unchecked") | |
| @Override | |
| public <R extends Temporal> R addTo(R temporal, long amount) { | |
| return (R) temporal.plus(amount, this); | |
| } | |
| //----------------------------------------------------------------------- | |
| @Override | |
| public long between(Temporal temporal1Inclusive, Temporal temporal2Exclusive) { | |
| return temporal1Inclusive.until(temporal2Exclusive, this); | |
| } | |
| //----------------------------------------------------------------------- | |
| @Override | |
| public String toString() { | |
| return name; | |
| } | |
| } |