| # | |
| # Copyright (c) 2004, 2018, Oracle and/or its affiliates. All rights reserved. | |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. | |
| # | |
| # This code is free software; you can redistribute it and/or modify it | |
| # under the terms of the GNU General Public License version 2 only, as | |
| # published by the Free Software Foundation. | |
| # | |
| # This code is distributed in the hope that it will be useful, but WITHOUT | |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| # version 2 for more details (a copy is included in the LICENSE file that | |
| # accompanied this code). | |
| # | |
| # You should have received a copy of the GNU General Public License version | |
| # 2 along with this work; if not, write to the Free Software Foundation, | |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. | |
| # | |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA | |
| # or visit www.oracle.com if you need additional information or have any | |
| # questions. | |
| # | |
| # | |
| setup() { | |
| # Verify directory context variables are set | |
| if [ "${TESTJAVA}" = "" ] ; then | |
| echo "TESTJAVA not set. Test cannot execute. Failed." | |
| exit 1 | |
| fi | |
| if [ "${TESTCLASSES}" = "" ] ; then | |
| TESTCLASSES="." | |
| fi | |
| if [ "${TESTSRC}" = "" ] ; then | |
| TESTSRC="." | |
| fi | |
| OS=`uname -s` | |
| case ${OS} in | |
| Windows_* | CYGWIN*) | |
| PS=";" | |
| FS="\\" | |
| ;; | |
| *) | |
| PS=":" | |
| FS="/" | |
| ;; | |
| esac | |
| } | |
| verify_os() { | |
| OS=`uname -s` | |
| case ${OS} in | |
| Windows_95 | Windows_98 | Windows_ME | CYGWIN* ) | |
| echo "Test bypassed: jvmstat feature not supported on ${OS}" | |
| exit 0 | |
| ;; | |
| Windows_*) | |
| # verify that the tmp directory supports persistent ACLs, which | |
| # are required for jvmstat to enable its shared memory feature. | |
| # NOTE: FAT type files systems do not support ACLs, but NTFS files | |
| # systems do. | |
| # | |
| echo "temp directory is in: `windir -t`" | |
| TMPDRIVE=`windir -t | cut -d: -f1` | |
| if [ "${TMPDRIVE}" = "" ] ; then | |
| echo "Could not get temp directory drive letter" | |
| exit 1 | |
| fi | |
| echo "temp file system characteristics:" | |
| sysinf drives -a | grep "^${TMPDRIVE}" | |
| sysinf drives -a | grep "^${TMPDRIVE}" | grep PERSISTENT_ACLS > /dev/null | |
| case $? in | |
| 0) | |
| ;; | |
| 1) | |
| echo "Test bypassed: jvmstat feature disabled because the temp" | |
| echo "directory doesn't support persistent ACLs" | |
| exit 0 | |
| ;; | |
| 2) | |
| echo "Could not get temp directory file system features" | |
| exit 1 | |
| ;; | |
| *) | |
| echo "Unexpected return code from grep - $?" | |
| exit 1 | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| } | |
| # function to kill the process with the given process id | |
| kill_proc() { | |
| kill_pid=$1 | |
| if [ "${kill_pid}" = "" ] | |
| then | |
| echo "kill_proc(): null pid: ignored" | |
| return | |
| fi | |
| if [ ${kill_pid} -le 0 ] | |
| then | |
| echo "kill_proc(): invalid pid: ${kill_pid}: ignored" | |
| return | |
| fi | |
| OS=`uname -s` | |
| case $OS in | |
| Windows_*) | |
| case ${SHELL_VERSION} in | |
| [1234567].* | 8.[12345].*) | |
| # when starting processes in the background, mks creates an | |
| # intervening between the parent process and the background | |
| # process. The pid acquired for background process as acquired | |
| # by the $! shell variable is actually the pid of the invervening | |
| # shell and not that of the background process. Sending a specific | |
| # signal to the intervening shell will only effects the intervening | |
| # shell and not the background process, thus leaving the background | |
| # process running. The following code assumes that the pid passed | |
| # into this function as ${kill_pid}, was acquired by $!. Therefore, | |
| # in order to kill the background process, we must first find the | |
| # children of ${kill_pid} (should be only one child) and kill them. | |
| ps -o pid,ppid | grep "${kill_pid}$" | |
| children=`mks_children ${kill_pid}` | |
| echo "killing children of ${kill_pid}: ${children}" | |
| for child in ${children} ; do | |
| kill_proc_common ${child} | |
| done | |
| ;; | |
| *) | |
| # in mks 8.6 and later, the pid returned in $! is now the pid | |
| # of the background process and not that of the intervening shell. | |
| kill_proc_common ${kill_pid} | |
| ;; | |
| esac | |
| ;; | |
| *) | |
| kill_proc_common ${kill_pid} | |
| ;; | |
| esac | |
| } | |
| mks_children() { | |
| ppid=$1 | |
| ps -o pid,ppid | grep "${ppid}$" | awk ' | |
| BEGIN { pids="" } | |
| { pids = pids $1 " " } | |
| END { print pids }' | |
| } | |
| kill_proc_common() { | |
| kpid=$1 | |
| # verify that the process exists and we can signal it | |
| kill -0 ${kpid} 2>/dev/null | |
| if [ $? -ne 0 ] | |
| then | |
| echo "Could not signal >${kpid}<" | |
| echo "user id = `id`" | |
| echo "process information :" | |
| ps -l -p ${kpid} | |
| return | |
| fi | |
| kill -TERM ${kpid} # hit it easy first | |
| if [ $? -eq 0 ] | |
| then | |
| sleep 2 | |
| kill -0 ${kpid} 2>/dev/null | |
| # check if it's still hanging around | |
| if [ $? -eq 0 ] | |
| then | |
| # it's still lingering, now hit it hard | |
| kill -KILL ${kpid} 2>/dev/null | |
| if [ $? -ne 0 ] | |
| then | |
| echo "Could not kill ${kpid}!" | |
| fi | |
| fi | |
| else | |
| echo "Error sending term signal to ${kpid}!" | |
| fi | |
| } | |
| # check to see if a port is free | |
| checkPort() # port | |
| { | |
| inuse=`netstat -a | egrep "\.$1"` | |
| if [ "${inuse}" = "" ] ; then | |
| echo "free" | |
| else | |
| echo "inuse" | |
| fi | |
| } | |
| # Get a free port, where port+1 is also free, return 0 when giving up | |
| freePort() | |
| { | |
| start=3000 | |
| while [ ${start} -lt 3030 ] ; do | |
| port1=`expr ${start} '+' $$ '%' 1000` | |
| port2=`expr ${port1} '+' 1` | |
| if [ "`checkPort ${port1}`" = "inuse" \ | |
| -o "`checkPort ${port2}`" = "inuse" ] ; then | |
| start=`expr ${start} '+' 1` | |
| else | |
| break | |
| fi | |
| done | |
| if [ "`checkPort ${port1}`" = "inuse" \ | |
| -o "`checkPort ${port2}`" = "inuse" ] ; then | |
| port1="0" | |
| fi | |
| echo "${port1}" | |
| } | |
| # Flags used by all jstat calls in jdk/sun/tools/jstat/*.sh | |
| # | |
| # The awk scripts parsing jstat output expect it to be in en-us locale. | |
| # Especially, we must force '.' instead of ',' in numbers. | |
| COMMON_JSTAT_FLAGS="-J-XX:+UsePerfData -J-Duser.language=en -J-Duser.country=en" | |