| /* |
| * Copyright (c) 2003, 2025, Oracle and/or its affiliates. All rights reserved. |
| * Copyright (c) 2014, 2020, Red Hat Inc. All rights reserved. |
| * Copyright (c) 2020, 2022, Huawei Technologies Co., Ltd. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include "asm/macroAssembler.inline.hpp" |
| #include "classfile/javaClasses.hpp" |
| #include "compiler/disassembler.hpp" |
| #include "gc/shared/barrierSetAssembler.hpp" |
| #include "interpreter/bytecodeHistogram.hpp" |
| #include "interpreter/bytecodeTracer.hpp" |
| #include "interpreter/interp_masm.hpp" |
| #include "interpreter/interpreter.hpp" |
| #include "interpreter/interpreterRuntime.hpp" |
| #include "interpreter/templateInterpreterGenerator.hpp" |
| #include "interpreter/templateTable.hpp" |
| #include "memory/resourceArea.hpp" |
| #include "oops/arrayOop.hpp" |
| #include "oops/method.inline.hpp" |
| #include "oops/methodData.hpp" |
| #include "oops/oop.inline.hpp" |
| #include "oops/resolvedIndyEntry.hpp" |
| #include "oops/resolvedMethodEntry.hpp" |
| #include "prims/jvmtiExport.hpp" |
| #include "prims/jvmtiThreadState.hpp" |
| #include "runtime/arguments.hpp" |
| #include "runtime/deoptimization.hpp" |
| #include "runtime/frame.inline.hpp" |
| #include "runtime/globals.hpp" |
| #include "runtime/jniHandles.hpp" |
| #include "runtime/sharedRuntime.hpp" |
| #include "runtime/stubRoutines.hpp" |
| #include "runtime/synchronizer.hpp" |
| #include "runtime/timer.hpp" |
| #include "runtime/vframeArray.hpp" |
| #include "utilities/checkedCast.hpp" |
| #include "utilities/debug.hpp" |
| #include "utilities/powerOfTwo.hpp" |
| #include <sys/types.h> |
| |
| #ifndef PRODUCT |
| #include "oops/method.hpp" |
| #endif // !PRODUCT |
| |
| // Size of interpreter code. Increase if too small. Interpreter will |
| // fail with a guarantee ("not enough space for interpreter generation"); |
| // if too small. |
| // Run with +PrintInterpreter to get the VM to print out the size. |
| // Max size with JVMTI |
| int TemplateInterpreter::InterpreterCodeSize = 256 * 1024; |
| |
| #define __ Disassembler::hook<InterpreterMacroAssembler>(__FILE__, __LINE__, _masm)-> |
| |
| //----------------------------------------------------------------------------- |
| |
| address TemplateInterpreterGenerator::generate_slow_signature_handler() { |
| address entry = __ pc(); |
| |
| __ andi(esp, esp, -16); |
| __ mv(c_rarg3, esp); |
| // xmethod |
| // xlocals |
| // c_rarg3: first stack arg - wordSize |
| // adjust sp |
| |
| __ subi(sp, c_rarg3, 18 * wordSize); |
| __ subi(sp, sp, 2 * wordSize); |
| __ sd(ra, Address(sp, 0)); |
| |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::slow_signature_handler), |
| xmethod, xlocals, c_rarg3); |
| |
| // x10: result handler |
| |
| // Stack layout: |
| // sp: return address <- sp |
| // 1 garbage |
| // 8 integer args (if static first is unused) |
| // 1 float/double identifiers |
| // 8 double args |
| // stack args <- esp |
| // garbage |
| // expression stack bottom |
| // bcp (null) |
| // ... |
| |
| // Restore ra |
| __ ld(ra, Address(sp, 0)); |
| __ addi(sp, sp , 2 * wordSize); |
| |
| // Do FP first so we can use c_rarg3 as temp |
| __ lwu(c_rarg3, Address(sp, 9 * wordSize)); // float/double identifiers |
| |
| for (int i = 0; i < Argument::n_float_register_parameters_c; i++) { |
| const FloatRegister r = g_FPArgReg[i]; |
| Label d, done; |
| |
| __ test_bit(t0, c_rarg3, i); |
| __ bnez(t0, d); |
| __ flw(r, Address(sp, (10 + i) * wordSize)); |
| __ j(done); |
| __ bind(d); |
| __ fld(r, Address(sp, (10 + i) * wordSize)); |
| __ bind(done); |
| } |
| |
| // c_rarg0 contains the result from the call of |
| // InterpreterRuntime::slow_signature_handler so we don't touch it |
| // here. It will be loaded with the JNIEnv* later. |
| for (int i = 1; i < Argument::n_int_register_parameters_c; i++) { |
| const Register rm = g_INTArgReg[i]; |
| __ ld(rm, Address(sp, i * wordSize)); |
| } |
| |
| __ addi(sp, sp, 18 * wordSize); |
| __ ret(); |
| |
| return entry; |
| } |
| |
| // Various method entries |
| address TemplateInterpreterGenerator::generate_math_entry(AbstractInterpreter::MethodKind kind) { |
| // xmethod: Method* |
| // x19_sender_sp: sender sp |
| // esp: args |
| |
| // These don't need a safepoint check because they aren't virtually |
| // callable. We won't enter these intrinsics from compiled code. |
| // If in the future we added an intrinsic which was virtually callable |
| // we'd have to worry about how to safepoint so that this code is used. |
| |
| // mathematical functions inlined by compiler |
| // (interpreter must provide identical implementation |
| // in order to avoid monotonicity bugs when switching |
| // from interpreter to compiler in the middle of some |
| // computation) |
| // |
| // stack: |
| // [ arg ] <-- esp |
| // [ arg ] |
| // retaddr in ra |
| |
| address fn = nullptr; |
| address entry_point = nullptr; |
| switch (kind) { |
| case Interpreter::java_lang_math_abs: |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp)); |
| __ fabs_d(f10, f10); |
| __ mv(sp, x19_sender_sp); // Restore caller's SP |
| break; |
| case Interpreter::java_lang_math_sqrt: |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp)); |
| __ fsqrt_d(f10, f10); |
| __ mv(sp, x19_sender_sp); |
| break; |
| case Interpreter::java_lang_math_sin : |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp)); |
| __ mv(sp, x19_sender_sp); |
| __ mv(x9, ra); |
| if (StubRoutines::dsin() == nullptr) { |
| fn = CAST_FROM_FN_PTR(address, SharedRuntime::dsin); |
| } else { |
| fn = CAST_FROM_FN_PTR(address, StubRoutines::dsin()); |
| } |
| __ rt_call(fn); |
| __ mv(ra, x9); |
| break; |
| case Interpreter::java_lang_math_cos : |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp)); |
| __ mv(sp, x19_sender_sp); |
| __ mv(x9, ra); |
| if (StubRoutines::dcos() == nullptr) { |
| fn = CAST_FROM_FN_PTR(address, SharedRuntime::dcos); |
| } else { |
| fn = CAST_FROM_FN_PTR(address, StubRoutines::dcos()); |
| } |
| __ rt_call(fn); |
| __ mv(ra, x9); |
| break; |
| case Interpreter::java_lang_math_tan : |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp)); |
| __ mv(sp, x19_sender_sp); |
| __ mv(x9, ra); |
| if (StubRoutines::dtan() == nullptr) { |
| fn = CAST_FROM_FN_PTR(address, SharedRuntime::dtan); |
| } else { |
| fn = CAST_FROM_FN_PTR(address, StubRoutines::dtan()); |
| } |
| __ rt_call(fn); |
| __ mv(ra, x9); |
| break; |
| case Interpreter::java_lang_math_log : |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp)); |
| __ mv(sp, x19_sender_sp); |
| __ mv(x9, ra); |
| if (StubRoutines::dlog() == nullptr) { |
| fn = CAST_FROM_FN_PTR(address, SharedRuntime::dlog); |
| } else { |
| fn = CAST_FROM_FN_PTR(address, StubRoutines::dlog()); |
| } |
| __ rt_call(fn); |
| __ mv(ra, x9); |
| break; |
| case Interpreter::java_lang_math_log10 : |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp)); |
| __ mv(sp, x19_sender_sp); |
| __ mv(x9, ra); |
| if (StubRoutines::dlog10() == nullptr) { |
| fn = CAST_FROM_FN_PTR(address, SharedRuntime::dlog10); |
| } else { |
| fn = CAST_FROM_FN_PTR(address, StubRoutines::dlog10()); |
| } |
| __ rt_call(fn); |
| __ mv(ra, x9); |
| break; |
| case Interpreter::java_lang_math_exp : |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp)); |
| __ mv(sp, x19_sender_sp); |
| __ mv(x9, ra); |
| if (StubRoutines::dexp() == nullptr) { |
| fn = CAST_FROM_FN_PTR(address, SharedRuntime::dexp); |
| } else { |
| fn = CAST_FROM_FN_PTR(address, StubRoutines::dexp()); |
| } |
| __ rt_call(fn); |
| __ mv(ra, x9); |
| break; |
| case Interpreter::java_lang_math_pow : |
| entry_point = __ pc(); |
| __ mv(x9, ra); |
| __ fld(f10, Address(esp, 2 * Interpreter::stackElementSize)); |
| __ fld(f11, Address(esp)); |
| __ mv(sp, x19_sender_sp); |
| if (StubRoutines::dpow() == nullptr) { |
| fn = CAST_FROM_FN_PTR(address, SharedRuntime::dpow); |
| } else { |
| fn = CAST_FROM_FN_PTR(address, StubRoutines::dpow()); |
| } |
| __ rt_call(fn); |
| __ mv(ra, x9); |
| break; |
| case Interpreter::java_lang_math_fmaD : |
| if (UseFMA) { |
| entry_point = __ pc(); |
| __ fld(f10, Address(esp, 4 * Interpreter::stackElementSize)); |
| __ fld(f11, Address(esp, 2 * Interpreter::stackElementSize)); |
| __ fld(f12, Address(esp)); |
| __ fmadd_d(f10, f10, f11, f12); |
| __ mv(sp, x19_sender_sp); // Restore caller's SP |
| } |
| break; |
| case Interpreter::java_lang_math_fmaF : |
| if (UseFMA) { |
| entry_point = __ pc(); |
| __ flw(f10, Address(esp, 2 * Interpreter::stackElementSize)); |
| __ flw(f11, Address(esp, Interpreter::stackElementSize)); |
| __ flw(f12, Address(esp)); |
| __ fmadd_s(f10, f10, f11, f12); |
| __ mv(sp, x19_sender_sp); // Restore caller's SP |
| } |
| break; |
| default: |
| ; |
| } |
| if (entry_point != nullptr) { |
| __ ret(); |
| } |
| |
| return entry_point; |
| } |
| |
| // Abstract method entry |
| // Attempt to execute abstract method. Throw exception |
| address TemplateInterpreterGenerator::generate_abstract_entry(void) { |
| // xmethod: Method* |
| // x19_sender_sp: sender SP |
| |
| address entry_point = __ pc(); |
| |
| // abstract method entry |
| |
| // pop return address, reset last_sp to null |
| __ empty_expression_stack(); |
| __ restore_bcp(); // bcp must be correct for exception handler (was destroyed) |
| __ restore_locals(); // make sure locals pointer is correct as well (was destroyed) |
| |
| // throw exception |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::throw_AbstractMethodErrorWithMethod), |
| xmethod); |
| // the call_VM checks for exception, so we should never return here. |
| __ should_not_reach_here(); |
| |
| return entry_point; |
| } |
| |
| address TemplateInterpreterGenerator::generate_StackOverflowError_handler() { |
| address entry = __ pc(); |
| |
| #ifdef ASSERT |
| { |
| Label L; |
| __ ld(t0, Address(fp, frame::interpreter_frame_monitor_block_top_offset * wordSize)); |
| __ shadd(t0, t0, fp, t0, LogBytesPerWord); |
| // maximal sp for current fp (stack grows negative) |
| // check if frame is complete |
| __ bge(t0, sp, L); |
| __ stop ("interpreter frame not set up"); |
| __ bind(L); |
| } |
| #endif // ASSERT |
| // Restore bcp under the assumption that the current frame is still |
| // interpreted |
| __ restore_bcp(); |
| |
| // expression stack must be empty before entering the VM if an |
| // exception happened |
| __ empty_expression_stack(); |
| // throw exception |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_StackOverflowError)); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_ArrayIndexOutOfBounds_handler() { |
| address entry = __ pc(); |
| // expression stack must be empty before entering the VM if an |
| // exception happened |
| __ empty_expression_stack(); |
| // setup parameters |
| |
| // convention: expect aberrant index in register x11 |
| __ zext(c_rarg2, x11, 32); |
| // convention: expect array in register x13 |
| __ mv(c_rarg1, x13); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime:: |
| throw_ArrayIndexOutOfBoundsException), |
| c_rarg1, c_rarg2); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_ClassCastException_handler() { |
| address entry = __ pc(); |
| |
| // object is at TOS |
| __ pop_reg(c_rarg1); |
| |
| // expression stack must be empty before entering the VM if an |
| // exception happened |
| __ empty_expression_stack(); |
| |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime:: |
| throw_ClassCastException), |
| c_rarg1); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_exception_handler_common( |
| const char* name, const char* message, bool pass_oop) { |
| assert(!pass_oop || message == nullptr, "either oop or message but not both"); |
| address entry = __ pc(); |
| if (pass_oop) { |
| // object is at TOS |
| __ pop_reg(c_rarg2); |
| } |
| // expression stack must be empty before entering the VM if an |
| // exception happened |
| __ empty_expression_stack(); |
| // setup parameters |
| __ la(c_rarg1, Address((address)name)); |
| if (pass_oop) { |
| __ call_VM(x10, CAST_FROM_FN_PTR(address, |
| InterpreterRuntime:: |
| create_klass_exception), |
| c_rarg1, c_rarg2); |
| } else { |
| // kind of lame ExternalAddress can't take null because |
| // external_word_Relocation will assert. |
| if (message != nullptr) { |
| __ la(c_rarg2, Address((address)message)); |
| } else { |
| __ mv(c_rarg2, NULL_WORD); |
| } |
| __ call_VM(x10, |
| CAST_FROM_FN_PTR(address, InterpreterRuntime::create_exception), |
| c_rarg1, c_rarg2); |
| } |
| // throw exception |
| __ j(RuntimeAddress(Interpreter::throw_exception_entry())); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_return_entry_for(TosState state, int step, size_t index_size) { |
| address entry = __ pc(); |
| |
| // Restore stack bottom in case i2c adjusted stack |
| __ ld(t0, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| __ shadd(esp, t0, fp, t0, LogBytesPerWord); |
| // and null it as marker that esp is now tos until next java call |
| __ sd(zr, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| __ restore_bcp(); |
| __ restore_locals(); |
| __ restore_constant_pool_cache(); |
| __ get_method(xmethod); |
| |
| if (state == atos) { |
| Register obj = x10; |
| Register mdp = x11; |
| Register tmp = x12; |
| __ ld(mdp, Address(xmethod, Method::method_data_offset())); |
| __ profile_return_type(mdp, obj, tmp); |
| } |
| |
| const Register cache = x11; |
| const Register index = x12; |
| |
| if (index_size == sizeof(u4)) { |
| __ load_resolved_indy_entry(cache, index); |
| __ load_unsigned_short(cache, Address(cache, in_bytes(ResolvedIndyEntry::num_parameters_offset()))); |
| __ shadd(esp, cache, esp, t0, 3); |
| } else { |
| // Pop N words from the stack |
| assert(index_size == sizeof(u2), "Can only be u2"); |
| __ load_method_entry(cache, index); |
| __ load_unsigned_short(cache, Address(cache, in_bytes(ResolvedMethodEntry::num_parameters_offset()))); |
| |
| __ shadd(esp, cache, esp, t0, 3); |
| } |
| |
| // Restore machine SP |
| __ restore_sp_after_call(); |
| |
| __ check_and_handle_popframe(xthread); |
| __ check_and_handle_earlyret(xthread); |
| |
| __ get_dispatch(); |
| __ dispatch_next(state, step); |
| |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_deopt_entry_for(TosState state, |
| int step, |
| address continuation) { |
| address entry = __ pc(); |
| __ restore_bcp(); |
| __ restore_locals(); |
| __ restore_constant_pool_cache(); |
| __ get_method(xmethod); |
| __ get_dispatch(); |
| |
| __ restore_sp_after_call(); // Restore SP to extended SP |
| |
| // Restore expression stack pointer |
| __ ld(t0, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| __ shadd(esp, t0, fp, t0, LogBytesPerWord); |
| // null last_sp until next java call |
| __ sd(zr, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| |
| // handle exceptions |
| { |
| Label L; |
| __ ld(t0, Address(xthread, Thread::pending_exception_offset())); |
| __ beqz(t0, L); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, InterpreterRuntime::throw_pending_exception)); |
| __ should_not_reach_here(); |
| __ bind(L); |
| } |
| |
| if (continuation == nullptr) { |
| __ dispatch_next(state, step); |
| } else { |
| __ jump_to_entry(continuation); |
| } |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_result_handler_for(BasicType type) { |
| address entry = __ pc(); |
| if (type == T_OBJECT) { |
| // retrieve result from frame |
| __ ld(x10, Address(fp, frame::interpreter_frame_oop_temp_offset * wordSize)); |
| // and verify it |
| __ verify_oop(x10); |
| } else { |
| __ cast_primitive_type(type, x10); |
| } |
| |
| __ ret(); // return from result handler |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_safept_entry_for(TosState state, |
| address runtime_entry) { |
| assert_cond(runtime_entry != nullptr); |
| address entry = __ pc(); |
| __ push(state); |
| __ push_cont_fastpath(xthread); |
| __ call_VM(noreg, runtime_entry); |
| __ pop_cont_fastpath(xthread); |
| __ membar(MacroAssembler::AnyAny); |
| __ dispatch_via(vtos, Interpreter::_normal_table.table_for(vtos)); |
| return entry; |
| } |
| |
| address TemplateInterpreterGenerator::generate_cont_resume_interpreter_adapter() { |
| if (!Continuations::enabled()) return nullptr; |
| address start = __ pc(); |
| |
| __ restore_bcp(); |
| __ restore_locals(); |
| |
| // Restore constant pool cache |
| __ ld(xcpool, Address(fp, frame::interpreter_frame_cache_offset * wordSize)); |
| |
| // Restore Java expression stack pointer |
| __ ld(t0, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| __ shadd(esp, t0, fp, t0, Interpreter::logStackElementSize); |
| // and null it as marker that esp is now tos until next java call |
| __ sd(zr, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| |
| // Restore machine SP |
| __ ld(t0, Address(fp, frame::interpreter_frame_extended_sp_offset * wordSize)); |
| __ shadd(sp, t0, fp, t0, LogBytesPerWord); |
| |
| // Restore method |
| __ ld(xmethod, Address(fp, frame::interpreter_frame_method_offset * wordSize)); |
| |
| // Restore dispatch |
| __ la(xdispatch, ExternalAddress((address)Interpreter::dispatch_table())); |
| |
| __ ret(); |
| |
| return start; |
| } |
| |
| |
| // Helpers for commoning out cases in the various type of method entries. |
| // |
| |
| |
| // increment invocation count & check for overflow |
| // |
| // Note: checking for negative value instead of overflow |
| // so we have a 'sticky' overflow test |
| // |
| // xmethod: method |
| // |
| void TemplateInterpreterGenerator::generate_counter_incr(Label* overflow) { |
| Label done; |
| // Note: In tiered we increment either counters in Method* or in MDO depending if we're profiling or not. |
| int increment = InvocationCounter::count_increment; |
| Label no_mdo; |
| if (ProfileInterpreter) { |
| // Are we profiling? |
| __ ld(x10, Address(xmethod, Method::method_data_offset())); |
| __ beqz(x10, no_mdo); |
| // Increment counter in the MDO |
| const Address mdo_invocation_counter(x10, in_bytes(MethodData::invocation_counter_offset()) + |
| in_bytes(InvocationCounter::counter_offset())); |
| const Address mask(x10, in_bytes(MethodData::invoke_mask_offset())); |
| __ increment_mask_and_jump(mdo_invocation_counter, increment, mask, t0, t1, false, overflow); |
| __ j(done); |
| } |
| __ bind(no_mdo); |
| // Increment counter in MethodCounters |
| const Address invocation_counter(t1, |
| MethodCounters::invocation_counter_offset() + |
| InvocationCounter::counter_offset()); |
| __ get_method_counters(xmethod, t1, done); |
| const Address mask(t1, in_bytes(MethodCounters::invoke_mask_offset())); |
| __ increment_mask_and_jump(invocation_counter, increment, mask, t0, x11, false, overflow); |
| __ bind(done); |
| } |
| |
| void TemplateInterpreterGenerator::generate_counter_overflow(Label& do_continue) { |
| __ mv(c_rarg1, zr); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, InterpreterRuntime::frequency_counter_overflow), c_rarg1); |
| __ j(do_continue); |
| } |
| |
| // See if we've got enough room on the stack for locals plus overhead |
| // below JavaThread::stack_overflow_limit(). If not, throw a StackOverflowError |
| // without going through the signal handler, i.e., reserved and yellow zones |
| // will not be made usable. The shadow zone must suffice to handle the |
| // overflow. |
| // The expression stack grows down incrementally, so the normal guard |
| // page mechanism will work for that. |
| // |
| // NOTE: Since the additional locals are also always pushed (wasn't |
| // obvious in generate_method_entry) so the guard should work for them |
| // too. |
| // |
| // Args: |
| // x13: number of additional locals this frame needs (what we must check) |
| // xmethod: Method* |
| // |
| // Kills: |
| // x10 |
| void TemplateInterpreterGenerator::generate_stack_overflow_check(void) { |
| |
| // monitor entry size: see picture of stack set |
| // (generate_method_entry) and frame_amd64.hpp |
| const int entry_size = frame::interpreter_frame_monitor_size_in_bytes(); |
| |
| // total overhead size: entry_size + (saved fp through expr stack |
| // bottom). be sure to change this if you add/subtract anything |
| // to/from the overhead area |
| const int overhead_size = |
| -(frame::interpreter_frame_initial_sp_offset * wordSize) + entry_size; |
| |
| const int page_size = (int)os::vm_page_size(); |
| |
| Label after_frame_check; |
| |
| // see if the frame is greater than one page in size. If so, |
| // then we need to verify there is enough stack space remaining |
| // for the additional locals. |
| __ mv(t0, (page_size - overhead_size) / Interpreter::stackElementSize); |
| __ bleu(x13, t0, after_frame_check); |
| |
| // compute sp as if this were going to be the last frame on |
| // the stack before the red zone |
| |
| // locals + overhead, in bytes |
| __ mv(x10, overhead_size); |
| __ shadd(x10, x13, x10, t0, Interpreter::logStackElementSize); // 2 slots per parameter. |
| |
| const Address stack_limit(xthread, JavaThread::stack_overflow_limit_offset()); |
| __ ld(t0, stack_limit); |
| |
| #ifdef ASSERT |
| Label limit_okay; |
| // Verify that thread stack limit is non-zero. |
| __ bnez(t0, limit_okay); |
| __ stop("stack overflow limit is zero"); |
| __ bind(limit_okay); |
| #endif |
| |
| // Add stack limit to locals. |
| __ add(x10, x10, t0); |
| |
| // Check against the current stack bottom. |
| __ bgtu(sp, x10, after_frame_check); |
| |
| // Remove the incoming args, peeling the machine SP back to where it |
| // was in the caller. This is not strictly necessary, but unless we |
| // do so the stack frame may have a garbage FP; this ensures a |
| // correct call stack that we can always unwind. The ANDI should be |
| // unnecessary because the sender SP in x19 is always aligned, but |
| // it doesn't hurt. |
| __ andi(sp, x19_sender_sp, -16); |
| |
| // Note: the restored frame is not necessarily interpreted. |
| // Use the shared runtime version of the StackOverflowError. |
| assert(SharedRuntime::throw_StackOverflowError_entry() != nullptr, "stub not yet generated"); |
| __ far_jump(RuntimeAddress(SharedRuntime::throw_StackOverflowError_entry())); |
| |
| // all done with frame size check |
| __ bind(after_frame_check); |
| } |
| |
| // Allocate monitor and lock method (asm interpreter) |
| // |
| // Args: |
| // xmethod: Method* |
| // xlocals: locals |
| // |
| // Kills: |
| // x10 |
| // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ...(param regs) |
| // t0, t1 (temporary regs) |
| void TemplateInterpreterGenerator::lock_method() { |
| // synchronize method |
| const Address access_flags(xmethod, Method::access_flags_offset()); |
| const Address monitor_block_top(fp, frame::interpreter_frame_monitor_block_top_offset * wordSize); |
| const int entry_size = frame::interpreter_frame_monitor_size_in_bytes(); |
| |
| #ifdef ASSERT |
| __ load_unsigned_short(x10, access_flags); |
| __ verify_access_flags(x10, JVM_ACC_SYNCHRONIZED, "method doesn't need synchronization", false); |
| #endif // ASSERT |
| |
| // get synchronization object |
| { |
| Label done; |
| __ load_unsigned_short(x10, access_flags); |
| __ andi(t0, x10, JVM_ACC_STATIC); |
| // get receiver (assume this is frequent case) |
| __ ld(x10, Address(xlocals, Interpreter::local_offset_in_bytes(0))); |
| __ beqz(t0, done); |
| __ load_mirror(x10, xmethod, x15, t1); |
| |
| #ifdef ASSERT |
| { |
| Label L; |
| __ bnez(x10, L); |
| __ stop("synchronization object is null"); |
| __ bind(L); |
| } |
| #endif // ASSERT |
| |
| __ bind(done); |
| } |
| |
| // add space for monitor & lock |
| __ check_extended_sp(); |
| __ sub(sp, sp, entry_size); // add space for a monitor entry |
| __ sub(esp, esp, entry_size); |
| __ sub(t0, sp, fp); |
| __ srai(t0, t0, Interpreter::logStackElementSize); |
| __ sd(t0, Address(fp, frame::interpreter_frame_extended_sp_offset * wordSize)); |
| __ sub(t0, esp, fp); |
| __ srai(t0, t0, Interpreter::logStackElementSize); |
| __ sd(t0, monitor_block_top); // set new monitor block top |
| // store object |
| __ sd(x10, Address(esp, BasicObjectLock::obj_offset())); |
| __ mv(c_rarg1, esp); // object address |
| __ lock_object(c_rarg1); |
| } |
| |
| // Generate a fixed interpreter frame. This is identical setup for |
| // interpreted methods and for native methods hence the shared code. |
| // |
| // Args: |
| // ra: return address |
| // xmethod: Method* |
| // xlocals: pointer to locals |
| // xcpool: cp cache |
| // stack_pointer: previous sp |
| void TemplateInterpreterGenerator::generate_fixed_frame(bool native_call) { |
| // Save ConstMethod* in x15_const_method for later use to avoid loading multiple times |
| Register x15_const_method = x15; |
| __ ld(x15_const_method, Address(xmethod, Method::const_offset())); |
| |
| // initialize fixed part of activation frame |
| if (native_call) { |
| __ subi(esp, sp, 14 * wordSize); |
| __ mv(xbcp, zr); |
| __ subi(sp, sp, 14 * wordSize); |
| // add 2 zero-initialized slots for native calls |
| __ sd(zr, Address(sp, 13 * wordSize)); |
| __ sd(zr, Address(sp, 12 * wordSize)); |
| } else { |
| __ subi(esp, sp, 12 * wordSize); |
| __ add(xbcp, x15_const_method, in_bytes(ConstMethod::codes_offset())); // get codebase |
| __ subi(sp, sp, 12 * wordSize); |
| } |
| __ sd(xbcp, Address(sp, wordSize)); |
| __ mv(t0, frame::interpreter_frame_initial_sp_offset); |
| __ sd(t0, Address(sp, 0)); |
| |
| if (ProfileInterpreter) { |
| Label method_data_continue; |
| __ ld(t0, Address(xmethod, Method::method_data_offset())); |
| __ beqz(t0, method_data_continue); |
| __ la(t0, Address(t0, in_bytes(MethodData::data_offset()))); |
| __ bind(method_data_continue); |
| } |
| |
| __ sd(xmethod, Address(sp, 7 * wordSize)); |
| __ sd(ProfileInterpreter ? t0 : zr, Address(sp, 6 * wordSize)); |
| |
| __ sd(ra, Address(sp, 11 * wordSize)); |
| __ sd(fp, Address(sp, 10 * wordSize)); |
| __ la(fp, Address(sp, 12 * wordSize)); // include ra & fp |
| |
| // Save ConstantPool* in x28_constants for later use to avoid loading multiple times |
| Register x28_constants = x28; |
| __ ld(x28_constants, Address(x15_const_method, ConstMethod::constants_offset())); |
| __ ld(xcpool, Address(x28_constants, ConstantPool::cache_offset())); |
| __ sd(xcpool, Address(sp, 3 * wordSize)); |
| __ sub(t0, xlocals, fp); |
| __ srai(t0, t0, Interpreter::logStackElementSize); // t0 = xlocals - fp(); |
| // Store relativized xlocals, see frame::interpreter_frame_locals(). |
| __ sd(t0, Address(sp, 2 * wordSize)); |
| |
| // set sender sp |
| // leave last_sp as null |
| __ sd(x19_sender_sp, Address(sp, 9 * wordSize)); |
| __ sd(zr, Address(sp, 8 * wordSize)); |
| |
| // Get mirror, Resolve ConstantPool* -> InstanceKlass* -> Java mirror |
| // and store it in the frame as GC root for this Method* |
| __ ld(t2, Address(x28_constants, ConstantPool::pool_holder_offset())); |
| __ ld(t2, Address(t2, in_bytes(Klass::java_mirror_offset()))); |
| __ resolve_oop_handle(t2, t0, t1); |
| __ sd(t2, Address(sp, 4 * wordSize)); |
| |
| if (!native_call) { |
| __ lhu(t0, Address(x15_const_method, ConstMethod::max_stack_offset())); |
| __ add(t0, t0, MAX2(3, Method::extra_stack_entries())); |
| __ slli(t0, t0, 3); |
| __ sub(t0, sp, t0); |
| __ andi(t0, t0, -16); |
| __ sub(t1, t0, fp); |
| __ srai(t1, t1, Interpreter::logStackElementSize); |
| // Store extended SP |
| __ sd(t1, Address(sp, 5 * wordSize)); |
| // Move SP out of the way |
| __ mv(sp, t0); |
| } else { |
| // Make sure there is room for the exception oop pushed in case method throws |
| // an exception (see TemplateInterpreterGenerator::generate_throw_exception()) |
| __ subi(t0, sp, 2 * wordSize); |
| __ sub(t1, t0, fp); |
| __ srai(t1, t1, Interpreter::logStackElementSize); |
| __ sd(t1, Address(sp, 5 * wordSize)); |
| __ mv(sp, t0); |
| } |
| } |
| |
| // End of helpers |
| |
| // Various method entries |
| //------------------------------------------------------------------------------------------------------------------------ |
| // |
| // |
| |
| // Method entry for java.lang.ref.Reference.get. |
| address TemplateInterpreterGenerator::generate_Reference_get_entry(void) { |
| // Code: _aload_0, _getfield, _areturn |
| // parameter size = 1 |
| // |
| // The code that gets generated by this routine is split into 2 parts: |
| // 1. The "intrinsified" code for G1 (or any SATB based GC), |
| // 2. The slow path - which is an expansion of the regular method entry. |
| // |
| // Notes:- |
| // * In the G1 code we do not check whether we need to block for |
| // a safepoint. If G1 is enabled then we must execute the specialized |
| // code for Reference.get (except when the Reference object is null) |
| // so that we can log the value in the referent field with an SATB |
| // update buffer. |
| // If the code for the getfield template is modified so that the |
| // G1 pre-barrier code is executed when the current method is |
| // Reference.get() then going through the normal method entry |
| // will be fine. |
| // * The G1 code can, however, check the receiver object (the instance |
| // of java.lang.Reference) and jump to the slow path if null. If the |
| // Reference object is null then we obviously cannot fetch the referent |
| // and so we don't need to call the G1 pre-barrier. Thus we can use the |
| // regular method entry code to generate the NPE. |
| // |
| // This code is based on generate_accessor_entry. |
| // |
| // xmethod: Method* |
| // x19_sender_sp: senderSP must preserve for slow path, set SP to it on fast path |
| |
| // ra is live. It must be saved around calls. |
| |
| address entry = __ pc(); |
| |
| const int referent_offset = java_lang_ref_Reference::referent_offset(); |
| guarantee(referent_offset > 0, "referent offset not initialized"); |
| |
| Label slow_path; |
| const Register local_0 = c_rarg0; |
| // Check if local 0 isn't null |
| // If the receiver is null then it is OK to jump to the slow path. |
| __ ld(local_0, Address(esp, 0)); |
| __ beqz(local_0, slow_path); |
| |
| // Load the value of the referent field. |
| const Address field_address(local_0, referent_offset); |
| BarrierSetAssembler *bs = BarrierSet::barrier_set()->barrier_set_assembler(); |
| bs->load_at(_masm, IN_HEAP | ON_WEAK_OOP_REF, T_OBJECT, local_0, field_address, /*tmp1*/ t0, /*tmp2*/ t1); |
| |
| // areturn |
| __ andi(sp, x19_sender_sp, -16); // done with stack |
| __ ret(); |
| |
| // generate a vanilla interpreter entry as the slow path |
| __ bind(slow_path); |
| __ jump_to_entry(Interpreter::entry_for_kind(Interpreter::zerolocals)); |
| return entry; |
| } |
| |
| /** |
| * Method entry for static native methods: |
| * int java.util.zip.CRC32.update(int crc, int b) |
| */ |
| address TemplateInterpreterGenerator::generate_CRC32_update_entry() { |
| // TODO: Unimplemented generate_CRC32_update_entry |
| return nullptr; |
| } |
| |
| /** |
| * Method entry for static native methods: |
| * int java.util.zip.CRC32.updateBytes(int crc, byte[] b, int off, int len) |
| * int java.util.zip.CRC32.updateByteBuffer(int crc, long buf, int off, int len) |
| */ |
| address TemplateInterpreterGenerator::generate_CRC32_updateBytes_entry(AbstractInterpreter::MethodKind kind) { |
| // TODO: Unimplemented generate_CRC32_updateBytes_entry |
| return nullptr; |
| } |
| |
| /** |
| * Method entry for intrinsic-candidate (non-native) methods: |
| * int java.util.zip.CRC32C.updateBytes(int crc, byte[] b, int off, int end) |
| * int java.util.zip.CRC32C.updateDirectByteBuffer(int crc, long buf, int off, int end) |
| * Unlike CRC32, CRC32C does not have any methods marked as native |
| * CRC32C also uses an "end" variable instead of the length variable CRC32 uses |
| */ |
| address TemplateInterpreterGenerator::generate_CRC32C_updateBytes_entry(AbstractInterpreter::MethodKind kind) { |
| // TODO: Unimplemented generate_CRC32C_updateBytes_entry |
| return nullptr; |
| } |
| |
| // Not supported |
| address TemplateInterpreterGenerator::generate_Float_float16ToFloat_entry() { return nullptr; } |
| address TemplateInterpreterGenerator::generate_Float_floatToFloat16_entry() { return nullptr; } |
| |
| void TemplateInterpreterGenerator::bang_stack_shadow_pages(bool native_call) { |
| // See more discussion in stackOverflow.hpp. |
| |
| const int shadow_zone_size = checked_cast<int>(StackOverflow::stack_shadow_zone_size()); |
| const int page_size = (int)os::vm_page_size(); |
| const int n_shadow_pages = shadow_zone_size / page_size; |
| |
| #ifdef ASSERT |
| Label L_good_limit; |
| __ ld(t0, Address(xthread, JavaThread::shadow_zone_safe_limit())); |
| __ bnez(t0, L_good_limit); |
| __ stop("shadow zone safe limit is not initialized"); |
| __ bind(L_good_limit); |
| |
| Label L_good_watermark; |
| __ ld(t0, Address(xthread, JavaThread::shadow_zone_growth_watermark())); |
| __ bnez(t0, L_good_watermark); |
| __ stop("shadow zone growth watermark is not initialized"); |
| __ bind(L_good_watermark); |
| #endif |
| |
| Label L_done; |
| |
| __ ld(t0, Address(xthread, JavaThread::shadow_zone_growth_watermark())); |
| __ bgtu(sp, t0, L_done); |
| |
| for (int p = 1; p <= n_shadow_pages; p++) { |
| __ bang_stack_with_offset(p * page_size); |
| } |
| |
| // Record the new watermark, but only if the update is above the safe limit. |
| // Otherwise, the next time around the check above would pass the safe limit. |
| __ ld(t0, Address(xthread, JavaThread::shadow_zone_safe_limit())); |
| __ bleu(sp, t0, L_done); |
| __ sd(sp, Address(xthread, JavaThread::shadow_zone_growth_watermark())); |
| |
| __ bind(L_done); |
| } |
| |
| // Interpreter stub for calling a native method. (asm interpreter) |
| // This sets up a somewhat different looking stack for calling the |
| // native method than the typical interpreter frame setup. |
| address TemplateInterpreterGenerator::generate_native_entry(bool synchronized) { |
| // determine code generation flags |
| bool inc_counter = UseCompiler || CountCompiledCalls; |
| |
| // x11: Method* |
| // x30: sender sp |
| |
| address entry_point = __ pc(); |
| |
| const Address constMethod (xmethod, Method::const_offset()); |
| const Address access_flags (xmethod, Method::access_flags_offset()); |
| const Address size_of_parameters(x12, ConstMethod:: |
| size_of_parameters_offset()); |
| |
| // get parameter size (always needed) |
| __ ld(x12, constMethod); |
| __ load_unsigned_short(x12, size_of_parameters); |
| |
| // Native calls don't need the stack size check since they have no |
| // expression stack and the arguments are already on the stack and |
| // we only add a handful of words to the stack. |
| |
| // xmethod: Method* |
| // x12: size of parameters |
| // x30: sender sp |
| |
| // for natives the size of locals is zero |
| |
| // compute beginning of parameters (xlocals) |
| __ shadd(xlocals, x12, esp, xlocals, 3); |
| __ subi(xlocals, xlocals, wordSize); |
| |
| // Pull SP back to minimum size: this avoids holes in the stack |
| __ andi(sp, esp, -16); |
| |
| // initialize fixed part of activation frame |
| generate_fixed_frame(true); |
| |
| // make sure method is native & not abstract |
| #ifdef ASSERT |
| __ load_unsigned_short(x10, access_flags); |
| __ verify_access_flags(x10, JVM_ACC_NATIVE, "tried to execute non-native method as native", false); |
| __ verify_access_flags(x10, JVM_ACC_ABSTRACT, "tried to execute abstract method in interpreter"); |
| #endif |
| |
| // Since at this point in the method invocation the exception |
| // handler would try to exit the monitor of synchronized methods |
| // which hasn't been entered yet, we set the thread local variable |
| // _do_not_unlock_if_synchronized to true. The remove_activation |
| // will check this flag. |
| |
| const Address do_not_unlock_if_synchronized(xthread, |
| in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); |
| __ mv(t1, true); |
| __ sb(t1, do_not_unlock_if_synchronized); |
| |
| // increment invocation count & check for overflow |
| Label invocation_counter_overflow; |
| if (inc_counter) { |
| generate_counter_incr(&invocation_counter_overflow); |
| } |
| |
| Label continue_after_compile; |
| __ bind(continue_after_compile); |
| |
| bang_stack_shadow_pages(true); |
| |
| // reset the _do_not_unlock_if_synchronized flag |
| __ sb(zr, do_not_unlock_if_synchronized); |
| |
| // check for synchronized methods |
| // Must happen AFTER invocation_counter check and stack overflow check, |
| // so method is not locked if overflows. |
| if (synchronized) { |
| lock_method(); |
| } else { |
| // no synchronization necessary |
| #ifdef ASSERT |
| __ load_unsigned_short(x10, access_flags); |
| __ verify_access_flags(x10, JVM_ACC_SYNCHRONIZED, "method needs synchronization"); |
| #endif |
| } |
| |
| // start execution |
| #ifdef ASSERT |
| __ verify_frame_setup(); |
| #endif |
| |
| // jvmti support |
| __ notify_method_entry(); |
| |
| // work registers |
| const Register t = x18; |
| const Register result_handler = x19; |
| |
| // allocate space for parameters |
| __ ld(t, Address(xmethod, Method::const_offset())); |
| __ load_unsigned_short(t, Address(t, ConstMethod::size_of_parameters_offset())); |
| |
| __ slli(t, t, Interpreter::logStackElementSize); |
| __ sub(x30, esp, t); |
| __ andi(sp, x30, -16); |
| __ mv(esp, x30); |
| |
| // get signature handler |
| { |
| Label L; |
| __ ld(t, Address(xmethod, Method::signature_handler_offset())); |
| __ bnez(t, L); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::prepare_native_call), |
| xmethod); |
| __ ld(t, Address(xmethod, Method::signature_handler_offset())); |
| __ bind(L); |
| } |
| |
| // call signature handler |
| assert(InterpreterRuntime::SignatureHandlerGenerator::from() == xlocals, |
| "adjust this code"); |
| assert(InterpreterRuntime::SignatureHandlerGenerator::to() == sp, |
| "adjust this code"); |
| assert(InterpreterRuntime::SignatureHandlerGenerator::temp() == t0, |
| "adjust this code"); |
| |
| // The generated handlers do not touch xmethod (the method). |
| // However, large signatures cannot be cached and are generated |
| // each time here. The slow-path generator can do a GC on return, |
| // so we must reload it after the call. |
| __ jalr(t); |
| __ get_method(xmethod); // slow path can do a GC, reload xmethod |
| |
| |
| // result handler is in x10 |
| // set result handler |
| __ mv(result_handler, x10); |
| // Save it in the frame in case of preemption; we cannot rely on callee saved registers. |
| __ sd(x10, Address(fp, frame::interpreter_frame_result_handler_offset * wordSize)); |
| |
| // pass mirror handle if static call |
| { |
| Label L; |
| __ load_unsigned_short(t, Address(xmethod, Method::access_flags_offset())); |
| __ test_bit(t0, t, exact_log2(JVM_ACC_STATIC)); |
| __ beqz(t0, L); |
| // get mirror |
| __ load_mirror(t, xmethod, x28, t1); |
| // copy mirror into activation frame |
| __ sd(t, Address(fp, frame::interpreter_frame_oop_temp_offset * wordSize)); |
| // pass handle to mirror |
| __ addi(c_rarg1, fp, frame::interpreter_frame_oop_temp_offset * wordSize); |
| __ bind(L); |
| } |
| |
| // get native function entry point in x28 |
| { |
| Label L; |
| __ ld(x28, Address(xmethod, Method::native_function_offset())); |
| ExternalAddress unsatisfied(SharedRuntime::native_method_throw_unsatisfied_link_error_entry()); |
| __ la(t, unsatisfied); |
| __ load_long_misaligned(t1, Address(t, 0), t0, 2); // 2 bytes aligned, but not 4 or 8 |
| |
| __ bne(x28, t1, L); |
| __ call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::prepare_native_call), |
| xmethod); |
| __ get_method(xmethod); |
| __ ld(x28, Address(xmethod, Method::native_function_offset())); |
| __ bind(L); |
| } |
| |
| // pass JNIEnv |
| __ add(c_rarg0, xthread, in_bytes(JavaThread::jni_environment_offset())); |
| |
| // It is enough that the pc() points into the right code |
| // segment. It does not have to be the correct return pc. |
| // For convenience we use the pc we want to resume to in |
| // case of preemption on Object.wait. |
| Label native_return; |
| __ set_last_Java_frame(esp, fp, native_return, x30); |
| |
| // change thread state |
| #ifdef ASSERT |
| { |
| Label L; |
| __ lwu(t, Address(xthread, JavaThread::thread_state_offset())); |
| __ mv(t0, (u1)_thread_in_Java); |
| __ beq(t, t0, L); |
| __ stop("Wrong thread state in native stub"); |
| __ bind(L); |
| } |
| #endif |
| |
| // Change state to native |
| __ la(t1, Address(xthread, JavaThread::thread_state_offset())); |
| __ mv(t0, _thread_in_native); |
| __ membar(MacroAssembler::LoadStore | MacroAssembler::StoreStore); |
| __ sw(t0, Address(t1)); |
| |
| __ push_cont_fastpath(); |
| |
| // Call the native method. |
| __ jalr(x28); |
| |
| __ pop_cont_fastpath(); |
| |
| __ get_method(xmethod); |
| // result potentially in x10 or f10 |
| |
| // Restore cpu control state after JNI call |
| __ restore_cpu_control_state_after_jni(t0); |
| |
| // make room for the pushes we're about to do |
| __ subi(t0, esp, 4 * wordSize); |
| __ andi(sp, t0, -16); |
| |
| // NOTE: The order of these pushes is known to frame::interpreter_frame_result |
| // in order to extract the result of a method call. If the order of these |
| // pushes change or anything else is added to the stack then the code in |
| // interpreter_frame_result must also change. |
| __ push(dtos); |
| __ push(ltos); |
| |
| // change thread state |
| // Force all preceding writes to be observed prior to thread state change |
| __ membar(MacroAssembler::LoadStore | MacroAssembler::StoreStore); |
| |
| __ mv(t0, _thread_in_native_trans); |
| __ sw(t0, Address(xthread, JavaThread::thread_state_offset())); |
| |
| // Force this write out before the read below |
| if (!UseSystemMemoryBarrier) { |
| __ membar(MacroAssembler::AnyAny); |
| } |
| |
| // check for safepoint operation in progress and/or pending suspend requests |
| { |
| Label L, Continue; |
| |
| __ safepoint_poll(L, true /* at_return */, false /* in_nmethod */); |
| __ lwu(t1, Address(xthread, JavaThread::suspend_flags_offset())); |
| __ beqz(t1, Continue); |
| __ bind(L); |
| |
| // Don't use call_VM as it will see a possible pending exception |
| // and forward it and never return here preventing us from |
| // clearing _last_native_pc down below. So we do a runtime call by |
| // hand. |
| // |
| __ mv(c_rarg0, xthread); |
| __ rt_call(CAST_FROM_FN_PTR(address, JavaThread::check_special_condition_for_native_trans)); |
| __ get_method(xmethod); |
| __ reinit_heapbase(); |
| __ bind(Continue); |
| } |
| |
| // change thread state |
| // Force all preceding writes to be observed prior to thread state change |
| __ membar(MacroAssembler::LoadStore | MacroAssembler::StoreStore); |
| |
| __ mv(t0, _thread_in_Java); |
| __ sw(t0, Address(xthread, JavaThread::thread_state_offset())); |
| |
| if (LockingMode != LM_LEGACY) { |
| // Check preemption for Object.wait() |
| Label not_preempted; |
| __ ld(t1, Address(xthread, JavaThread::preempt_alternate_return_offset())); |
| __ beqz(t1, not_preempted); |
| __ sd(zr, Address(xthread, JavaThread::preempt_alternate_return_offset())); |
| __ jr(t1); |
| __ bind(native_return); |
| __ restore_after_resume(true /* is_native */); |
| // reload result_handler |
| __ ld(result_handler, Address(fp, frame::interpreter_frame_result_handler_offset * wordSize)); |
| __ bind(not_preempted); |
| } else { |
| // any pc will do so just use this one for LM_LEGACY to keep code together. |
| __ bind(native_return); |
| } |
| |
| // reset_last_Java_frame |
| __ reset_last_Java_frame(true); |
| |
| if (CheckJNICalls) { |
| // clear_pending_jni_exception_check |
| __ sd(zr, Address(xthread, JavaThread::pending_jni_exception_check_fn_offset())); |
| } |
| |
| // reset handle block |
| __ ld(t, Address(xthread, JavaThread::active_handles_offset())); |
| __ sd(zr, Address(t, JNIHandleBlock::top_offset())); |
| |
| // If result is an oop unbox and store it in frame where gc will see it |
| // and result handler will pick it up |
| |
| { |
| Label no_oop; |
| __ la(t, ExternalAddress(AbstractInterpreter::result_handler(T_OBJECT))); |
| __ bne(t, result_handler, no_oop); |
| // Unbox oop result, e.g. JNIHandles::resolve result. |
| __ pop(ltos); |
| __ resolve_jobject(x10, t, t1); |
| __ sd(x10, Address(fp, frame::interpreter_frame_oop_temp_offset * wordSize)); |
| // keep stack depth as expected by pushing oop which will eventually be discarded |
| __ push(ltos); |
| __ bind(no_oop); |
| } |
| |
| { |
| Label no_reguard; |
| __ lwu(t0, Address(xthread, in_bytes(JavaThread::stack_guard_state_offset()))); |
| __ mv(t1, (u1)StackOverflow::stack_guard_yellow_reserved_disabled); |
| __ bne(t0, t1, no_reguard); |
| |
| __ push_call_clobbered_registers(); |
| __ mv(c_rarg0, xthread); |
| __ rt_call(CAST_FROM_FN_PTR(address, SharedRuntime::reguard_yellow_pages)); |
| __ pop_call_clobbered_registers(); |
| __ bind(no_reguard); |
| } |
| |
| // The method register is junk from after the thread_in_native transition |
| // until here. Also can't call_VM until the bcp has been |
| // restored. Need bcp for throwing exception below so get it now. |
| __ get_method(xmethod); |
| |
| // restore bcp to have legal interpreter frame, i.e., bci == 0 <=> |
| // xbcp == code_base() |
| __ ld(xbcp, Address(xmethod, Method::const_offset())); // get ConstMethod* |
| __ add(xbcp, xbcp, in_bytes(ConstMethod::codes_offset())); // get codebase |
| // handle exceptions (exception handling will handle unlocking!) |
| { |
| Label L; |
| __ ld(t0, Address(xthread, Thread::pending_exception_offset())); |
| __ beqz(t0, L); |
| // Note: At some point we may want to unify this with the code |
| // used in call_VM_base(); i.e., we should use the |
| // StubRoutines::forward_exception code. For now this doesn't work |
| // here because the sp is not correctly set at this point. |
| __ MacroAssembler::call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::throw_pending_exception)); |
| __ should_not_reach_here(); |
| __ bind(L); |
| } |
| |
| // do unlocking if necessary |
| { |
| Label L; |
| __ load_unsigned_short(t, Address(xmethod, Method::access_flags_offset())); |
| __ test_bit(t0, t, exact_log2(JVM_ACC_SYNCHRONIZED)); |
| __ beqz(t0, L); |
| // the code below should be shared with interpreter macro |
| // assembler implementation |
| { |
| Label unlock; |
| // BasicObjectLock will be first in list, since this is a |
| // synchronized method. However, need to check that the object |
| // has not been unlocked by an explicit monitorexit bytecode. |
| |
| // monitor expect in c_rarg1 for slow unlock path |
| __ la(c_rarg1, Address(fp, // address of first monitor |
| (intptr_t)(frame::interpreter_frame_initial_sp_offset * |
| wordSize - sizeof(BasicObjectLock)))); |
| |
| __ ld(t, Address(c_rarg1, BasicObjectLock::obj_offset())); |
| __ bnez(t, unlock); |
| |
| // Entry already unlocked, need to throw exception |
| __ MacroAssembler::call_VM(noreg, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::throw_illegal_monitor_state_exception)); |
| __ should_not_reach_here(); |
| |
| __ bind(unlock); |
| __ unlock_object(c_rarg1); |
| } |
| __ bind(L); |
| } |
| |
| #if INCLUDE_JFR |
| __ enter_jfr_critical_section(); |
| |
| // This poll test is to uphold the invariant that a JFR sampled frame |
| // must not return to its caller without a prior safepoint poll check. |
| // The earlier poll check in this routine is insufficient for this purpose |
| // because the thread has transitioned back to Java. |
| |
| Label slow_path; |
| Label fast_path; |
| __ safepoint_poll(slow_path, true /* at_return */, false /* in_nmethod */); |
| __ j(fast_path); |
| |
| __ bind(slow_path); |
| __ push(dtos); |
| __ push(ltos); |
| __ set_last_Java_frame(esp, fp, __ pc(), t0); |
| __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::at_unwind), xthread); |
| __ reset_last_Java_frame(true); |
| __ pop(ltos); |
| __ pop(dtos); |
| __ bind(fast_path); |
| |
| #endif // INCLUDE_JFR |
| |
| // jvmti support |
| // Note: This must happen _after_ handling/throwing any exceptions since |
| // the exception handler code notifies the runtime of method exits |
| // too. If this happens before, method entry/exit notifications are |
| // not properly paired (was bug - gri 11/22/99). |
| __ notify_method_exit(vtos, InterpreterMacroAssembler::NotifyJVMTI); |
| |
| __ pop(ltos); |
| __ pop(dtos); |
| |
| __ jalr(result_handler); |
| |
| // remove activation |
| // get sender sp |
| __ ld(esp, Address(fp, frame::interpreter_frame_sender_sp_offset * wordSize)); |
| // remove frame anchor |
| __ leave(); |
| |
| JFR_ONLY(__ leave_jfr_critical_section();) |
| |
| // restore sender sp |
| __ mv(sp, esp); |
| |
| __ ret(); |
| |
| if (inc_counter) { |
| // Handle overflow of counter and compile method |
| __ bind(invocation_counter_overflow); |
| generate_counter_overflow(continue_after_compile); |
| } |
| |
| return entry_point; |
| } |
| |
| // |
| // Generic interpreted method entry to (asm) interpreter |
| // |
| address TemplateInterpreterGenerator::generate_normal_entry(bool synchronized) { |
| |
| // determine code generation flags |
| const bool inc_counter = UseCompiler || CountCompiledCalls; |
| |
| // t0: sender sp |
| address entry_point = __ pc(); |
| |
| const Address constMethod(xmethod, Method::const_offset()); |
| const Address access_flags(xmethod, Method::access_flags_offset()); |
| const Address size_of_parameters(x13, |
| ConstMethod::size_of_parameters_offset()); |
| const Address size_of_locals(x13, ConstMethod::size_of_locals_offset()); |
| |
| // get parameter size (always needed) |
| // need to load the const method first |
| __ ld(x13, constMethod); |
| __ load_unsigned_short(x12, size_of_parameters); |
| |
| // x12: size of parameters |
| |
| __ load_unsigned_short(x13, size_of_locals); // get size of locals in words |
| __ sub(x13, x13, x12); // x13 = no. of additional locals |
| |
| // see if we've got enough room on the stack for locals plus overhead. |
| generate_stack_overflow_check(); |
| |
| // compute beginning of parameters (xlocals) |
| __ shadd(xlocals, x12, esp, t1, 3); |
| __ subi(xlocals, xlocals, wordSize); |
| |
| // Make room for additional locals |
| __ slli(t1, x13, 3); |
| __ sub(t0, esp, t1); |
| |
| // Padding between locals and fixed part of activation frame to ensure |
| // SP is always 16-byte aligned. |
| __ andi(sp, t0, -16); |
| |
| // x13 - # of additional locals |
| // allocate space for locals |
| // explicitly initialize locals |
| { |
| Label exit, loop; |
| __ blez(x13, exit); // do nothing if x13 <= 0 |
| __ bind(loop); |
| __ sd(zr, Address(t0)); |
| __ addi(t0, t0, wordSize); |
| __ subi(x13, x13, 1); // until everything initialized |
| __ bnez(x13, loop); |
| __ bind(exit); |
| } |
| |
| // And the base dispatch table |
| __ get_dispatch(); |
| |
| // initialize fixed part of activation frame |
| generate_fixed_frame(false); |
| |
| // make sure method is not native & not abstract |
| #ifdef ASSERT |
| __ load_unsigned_short(x10, access_flags); |
| __ verify_access_flags(x10, JVM_ACC_NATIVE, "tried to execute native method as non-native"); |
| __ verify_access_flags(x10, JVM_ACC_ABSTRACT, "tried to execute abstract method in interpreter"); |
| #endif |
| |
| // Since at this point in the method invocation the exception |
| // handler would try to exit the monitor of synchronized methods |
| // which hasn't been entered yet, we set the thread local variable |
| // _do_not_unlock_if_synchronized to true. The remove_activation |
| // will check this flag. |
| |
| const Address do_not_unlock_if_synchronized(xthread, |
| in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); |
| __ mv(t1, true); |
| __ sb(t1, do_not_unlock_if_synchronized); |
| |
| Label no_mdp; |
| const Register mdp = x13; |
| __ ld(mdp, Address(xmethod, Method::method_data_offset())); |
| __ beqz(mdp, no_mdp); |
| __ add(mdp, mdp, in_bytes(MethodData::data_offset())); |
| __ profile_parameters_type(mdp, x11, x12, x14); // use x11, x12, x14 as tmp registers |
| __ bind(no_mdp); |
| |
| // increment invocation count & check for overflow |
| Label invocation_counter_overflow; |
| if (inc_counter) { |
| generate_counter_incr(&invocation_counter_overflow); |
| } |
| |
| Label continue_after_compile; |
| __ bind(continue_after_compile); |
| |
| bang_stack_shadow_pages(false); |
| |
| // reset the _do_not_unlock_if_synchronized flag |
| __ sb(zr, do_not_unlock_if_synchronized); |
| |
| // check for synchronized methods |
| // Must happen AFTER invocation_counter check and stack overflow check, |
| // so method is not locked if overflows. |
| if (synchronized) { |
| // Allocate monitor and lock method |
| lock_method(); |
| } else { |
| // no synchronization necessary |
| #ifdef ASSERT |
| __ load_unsigned_short(x10, access_flags); |
| __ verify_access_flags(x10, JVM_ACC_SYNCHRONIZED, "method needs synchronization"); |
| #endif |
| } |
| |
| // start execution |
| #ifdef ASSERT |
| __ verify_frame_setup(); |
| #endif |
| |
| // jvmti support |
| __ notify_method_entry(); |
| |
| __ dispatch_next(vtos); |
| |
| // invocation counter overflow |
| if (inc_counter) { |
| // Handle overflow of counter and compile method |
| __ bind(invocation_counter_overflow); |
| generate_counter_overflow(continue_after_compile); |
| } |
| |
| return entry_point; |
| } |
| |
| // Method entry for java.lang.Thread.currentThread |
| address TemplateInterpreterGenerator::generate_currentThread() { |
| address entry_point = __ pc(); |
| |
| __ ld(x10, Address(xthread, JavaThread::vthread_offset())); |
| __ resolve_oop_handle(x10, t0, t1); |
| __ ret(); |
| |
| return entry_point; |
| } |
| |
| //----------------------------------------------------------------------------- |
| // Exceptions |
| |
| void TemplateInterpreterGenerator::generate_throw_exception() { |
| // Entry point in previous activation (i.e., if the caller was |
| // interpreted) |
| Interpreter::_rethrow_exception_entry = __ pc(); |
| // Restore sp to interpreter_frame_last_sp even though we are going |
| // to empty the expression stack for the exception processing. |
| __ sd(zr, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| // x10: exception |
| // x13: return address/pc that threw exception |
| __ restore_bcp(); // xbcp points to call/send |
| __ restore_locals(); |
| __ restore_constant_pool_cache(); |
| __ reinit_heapbase(); // restore xheapbase as heapbase. |
| __ get_dispatch(); |
| |
| // Entry point for exceptions thrown within interpreter code |
| Interpreter::_throw_exception_entry = __ pc(); |
| // If we came here via a NullPointerException on the receiver of a |
| // method, xthread may be corrupt. |
| __ get_method(xmethod); |
| // expression stack is undefined here |
| // x10: exception |
| // xbcp: exception bcp |
| __ verify_oop(x10); |
| __ mv(c_rarg1, x10); |
| |
| // expression stack must be empty before entering the VM in case of |
| // an exception |
| __ empty_expression_stack(); |
| // find exception handler address and preserve exception oop |
| __ call_VM(x13, |
| CAST_FROM_FN_PTR(address, |
| InterpreterRuntime::exception_handler_for_exception), |
| c_rarg1); |
| |
| // Restore machine SP |
| __ restore_sp_after_call(); |
| |
| // x10: exception handler entry point |
| // x13: preserved exception oop |
| // xbcp: bcp for exception handler |
| __ push_ptr(x13); // push exception which is now the only value on the stack |
| __ jr(x10); // jump to exception handler (may be _remove_activation_entry!) |
| |
| // If the exception is not handled in the current frame the frame is |
| // removed and the exception is rethrown (i.e. exception |
| // continuation is _rethrow_exception). |
| // |
| // Note: At this point the bci is still the bxi for the instruction |
| // which caused the exception and the expression stack is |
| // empty. Thus, for any VM calls at this point, GC will find a legal |
| // oop map (with empty expression stack). |
| |
| // |
| // JVMTI PopFrame support |
| // |
| |
| Interpreter::_remove_activation_preserving_args_entry = __ pc(); |
| __ empty_expression_stack(); |
| __ restore_bcp(); // We could have returned from deoptimizing this frame, so restore rbcp. |
| // Set the popframe_processing bit in pending_popframe_condition |
| // indicating that we are currently handling popframe, so that |
| // call_VMs that may happen later do not trigger new popframe |
| // handling cycles. |
| __ lwu(x13, Address(xthread, JavaThread::popframe_condition_offset())); |
| __ ori(x13, x13, JavaThread::popframe_processing_bit); |
| __ sw(x13, Address(xthread, JavaThread::popframe_condition_offset())); |
| |
| { |
| // Check to see whether we are returning to a deoptimized frame. |
| // (The PopFrame call ensures that the caller of the popped frame is |
| // either interpreted or compiled and deoptimizes it if compiled.) |
| // In this case, we can't call dispatch_next() after the frame is |
| // popped, but instead must save the incoming arguments and restore |
| // them after deoptimization has occurred. |
| // |
| // Note that we don't compare the return PC against the |
| // deoptimization blob's unpack entry because of the presence of |
| // adapter frames in C2. |
| Label caller_not_deoptimized; |
| __ ld(c_rarg1, Address(fp, frame::return_addr_offset * wordSize)); |
| __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::interpreter_contains), c_rarg1); |
| __ bnez(x10, caller_not_deoptimized); |
| |
| // Compute size of arguments for saving when returning to |
| // deoptimized caller |
| __ get_method(x10); |
| __ ld(x10, Address(x10, Method::const_offset())); |
| __ load_unsigned_short(x10, Address(x10, in_bytes(ConstMethod:: |
| size_of_parameters_offset()))); |
| __ slli(x10, x10, Interpreter::logStackElementSize); |
| __ restore_locals(); |
| __ sub(xlocals, xlocals, x10); |
| __ addi(xlocals, xlocals, wordSize); |
| // Save these arguments |
| __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, |
| Deoptimization:: |
| popframe_preserve_args), |
| xthread, x10, xlocals); |
| |
| __ remove_activation(vtos, |
| /* throw_monitor_exception */ false, |
| /* install_monitor_exception */ false, |
| /* notify_jvmdi */ false); |
| |
| // Inform deoptimization that it is responsible for restoring |
| // these arguments |
| __ mv(t0, JavaThread::popframe_force_deopt_reexecution_bit); |
| __ sw(t0, Address(xthread, JavaThread::popframe_condition_offset())); |
| |
| // Continue in deoptimization handler |
| __ ret(); |
| |
| __ bind(caller_not_deoptimized); |
| } |
| |
| __ remove_activation(vtos, |
| /* throw_monitor_exception */ false, |
| /* install_monitor_exception */ false, |
| /* notify_jvmdi */ false); |
| |
| // Restore the last_sp and null it out |
| __ ld(t0, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| __ shadd(esp, t0, fp, t0, LogBytesPerWord); |
| __ sd(zr, Address(fp, frame::interpreter_frame_last_sp_offset * wordSize)); |
| |
| __ restore_bcp(); |
| __ restore_locals(); |
| __ restore_constant_pool_cache(); |
| __ get_method(xmethod); |
| __ get_dispatch(); |
| |
| // The method data pointer was incremented already during |
| // call profiling. We have to restore the mdp for the current bcp. |
| if (ProfileInterpreter) { |
| __ set_method_data_pointer_for_bcp(); |
| } |
| |
| // Clear the popframe condition flag |
| __ sw(zr, Address(xthread, JavaThread::popframe_condition_offset())); |
| assert(JavaThread::popframe_inactive == 0, "fix popframe_inactive"); |
| |
| #if INCLUDE_JVMTI |
| { |
| Label L_done; |
| |
| __ lbu(t0, Address(xbcp, 0)); |
| __ mv(t1, Bytecodes::_invokestatic); |
| __ bne(t1, t0, L_done); |
| |
| // The member name argument must be restored if _invokestatic is re-executed after a PopFrame call. |
| // Detect such a case in the InterpreterRuntime function and return the member name argument,or null. |
| |
| __ ld(c_rarg0, Address(xlocals, 0)); |
| __ call_VM(x10, CAST_FROM_FN_PTR(address, InterpreterRuntime::member_name_arg_or_null),c_rarg0, xmethod, xbcp); |
| |
| __ beqz(x10, L_done); |
| |
| __ sd(x10, Address(esp, 0)); |
| __ bind(L_done); |
| } |
| #endif // INCLUDE_JVMTI |
| |
| // Restore machine SP |
| __ restore_sp_after_call(); |
| |
| __ dispatch_next(vtos); |
| // end of PopFrame support |
| |
| Interpreter::_remove_activation_entry = __ pc(); |
| |
| // preserve exception over this code sequence |
| __ pop_ptr(x10); |
| __ sd(x10, Address(xthread, JavaThread::vm_result_oop_offset())); |
| // remove the activation (without doing throws on illegalMonitorExceptions) |
| __ remove_activation(vtos, false, true, false); |
| // restore exception |
| __ get_vm_result_oop(x10, xthread); |
| |
| // In between activations - previous activation type unknown yet |
| // compute continuation point - the continuation point expects the |
| // following registers set up: |
| // |
| // x10: exception |
| // ra: return address/pc that threw exception |
| // sp: expression stack of caller |
| // fp: fp of caller |
| // FIXME: There's no point saving ra here because VM calls don't trash it |
| __ subi(sp, sp, 2 * wordSize); |
| __ sd(x10, Address(sp, 0)); // save exception |
| __ sd(ra, Address(sp, wordSize)); // save return address |
| __ super_call_VM_leaf(CAST_FROM_FN_PTR(address, |
| SharedRuntime::exception_handler_for_return_address), |
| xthread, ra); |
| __ mv(x11, x10); // save exception handler |
| __ ld(x10, Address(sp, 0)); // restore exception |
| __ ld(ra, Address(sp, wordSize)); // restore return address |
| __ addi(sp, sp, 2 * wordSize); |
| // We might be returning to a deopt handler that expects x13 to |
| // contain the exception pc |
| __ mv(x13, ra); |
| // Note that an "issuing PC" is actually the next PC after the call |
| __ jr(x11); // jump to exception |
| // handler of caller |
| } |
| |
| // |
| // JVMTI ForceEarlyReturn support |
| // |
| address TemplateInterpreterGenerator::generate_earlyret_entry_for(TosState state) { |
| address entry = __ pc(); |
| |
| __ restore_bcp(); |
| __ restore_locals(); |
| __ empty_expression_stack(); |
| __ load_earlyret_value(state); |
| |
| __ ld(t0, Address(xthread, JavaThread::jvmti_thread_state_offset())); |
| Address cond_addr(t0, JvmtiThreadState::earlyret_state_offset()); |
| |
| // Clear the earlyret state |
| assert(JvmtiThreadState::earlyret_inactive == 0, "should be"); |
| __ sd(zr, cond_addr); |
| |
| __ remove_activation(state, |
| false, /* throw_monitor_exception */ |
| false, /* install_monitor_exception */ |
| true); /* notify_jvmdi */ |
| __ ret(); |
| |
| return entry; |
| } |
| // end of ForceEarlyReturn support |
| |
| //----------------------------------------------------------------------------- |
| // Helper for vtos entry point generation |
| |
| void TemplateInterpreterGenerator::set_vtos_entry_points(Template* t, |
| address& bep, |
| address& cep, |
| address& sep, |
| address& aep, |
| address& iep, |
| address& lep, |
| address& fep, |
| address& dep, |
| address& vep) { |
| assert(t != nullptr && t->is_valid() && t->tos_in() == vtos, "illegal template"); |
| Label L; |
| aep = __ pc(); // atos entry point |
| __ push_ptr(); |
| __ j(L); |
| fep = __ pc(); // ftos entry point |
| __ push_f(); |
| __ j(L); |
| dep = __ pc(); // dtos entry point |
| __ push_d(); |
| __ j(L); |
| lep = __ pc(); // ltos entry point |
| __ push_l(); |
| __ j(L); |
| bep = cep = sep = iep = __ pc(); // [bcsi]tos entry point |
| __ push_i(); |
| vep = __ pc(); // vtos entry point |
| __ bind(L); |
| generate_and_dispatch(t); |
| } |
| |
| //----------------------------------------------------------------------------- |
| |
| // Non-product code |
| #ifndef PRODUCT |
| address TemplateInterpreterGenerator::generate_trace_code(TosState state) { |
| address entry = __ pc(); |
| |
| __ push_reg(ra); |
| __ push(state); |
| __ push_reg(RegSet::range(x10, x17) + RegSet::range(x5, x7) + RegSet::range(x28, x31), sp); |
| __ mv(c_rarg2, x10); // Pass itos |
| __ call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::trace_bytecode), c_rarg1, c_rarg2, c_rarg3); |
| __ pop_reg(RegSet::range(x10, x17) + RegSet::range(x5, x7) + RegSet::range(x28, x31), sp); |
| __ pop(state); |
| __ pop_reg(ra); |
| __ ret(); // return from result handler |
| |
| return entry; |
| } |
| |
| void TemplateInterpreterGenerator::count_bytecode() { |
| __ mv(x7, (address) &BytecodeCounter::_counter_value); |
| __ atomic_add(noreg, 1, x7); |
| } |
| |
| void TemplateInterpreterGenerator::histogram_bytecode(Template* t) { |
| __ mv(x7, (address) &BytecodeHistogram::_counters[t->bytecode()]); |
| __ atomic_addw(noreg, 1, x7); |
| } |
| |
| void TemplateInterpreterGenerator::histogram_bytecode_pair(Template* t) { |
| // Calculate new index for counter: |
| // _index = (_index >> log2_number_of_codes) | |
| // (bytecode << log2_number_of_codes); |
| Register index_addr = t1; |
| Register index = t0; |
| __ mv(index_addr, (address) &BytecodePairHistogram::_index); |
| __ lw(index, index_addr); |
| __ mv(x7, ((int)t->bytecode()) << BytecodePairHistogram::log2_number_of_codes); |
| __ srli(index, index, BytecodePairHistogram::log2_number_of_codes); |
| __ orrw(index, x7, index); |
| __ sw(index, index_addr); |
| // Bump bucket contents: |
| // _counters[_index] ++; |
| Register counter_addr = t1; |
| __ mv(x7, (address) &BytecodePairHistogram::_counters); |
| __ shadd(counter_addr, index, x7, counter_addr, LogBytesPerInt); |
| __ atomic_addw(noreg, 1, counter_addr); |
| } |
| |
| void TemplateInterpreterGenerator::trace_bytecode(Template* t) { |
| // Call a little run-time stub to avoid blow-up for each bytecode. |
| // The run-time runtime saves the right registers, depending on |
| // the tosca in-state for the given template. |
| |
| assert(Interpreter::trace_code(t->tos_in()) != nullptr, "entry must have been generated"); |
| __ rt_call(Interpreter::trace_code(t->tos_in())); |
| __ reinit_heapbase(); |
| } |
| |
| void TemplateInterpreterGenerator::stop_interpreter_at() { |
| Label L; |
| __ push_reg(t0); |
| __ mv(t0, (address) &BytecodeCounter::_counter_value); |
| __ ld(t0, Address(t0)); |
| __ mv(t1, StopInterpreterAt); |
| __ bne(t0, t1, L); |
| __ ebreak(); |
| __ bind(L); |
| __ pop_reg(t0); |
| } |
| |
| #endif // !PRODUCT |