| /* |
| * Copyright (c) 2020, 2025, Oracle and/or its affiliates. All rights reserved. |
| * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| * |
| * This code is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 only, as |
| * published by the Free Software Foundation. |
| * |
| * This code is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * version 2 for more details (a copy is included in the LICENSE file that |
| * accompanied this code). |
| * |
| * You should have received a copy of the GNU General Public License version |
| * 2 along with this work; if not, write to the Free Software Foundation, |
| * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| * or visit www.oracle.com if you need additional information or have any |
| * questions. |
| * |
| */ |
| |
| #include "asm/assembler.hpp" |
| #include "asm/assembler.inline.hpp" |
| #include "gc/shared/barrierSet.hpp" |
| #include "gc/shared/barrierSetAssembler.hpp" |
| #include "oops/methodData.hpp" |
| #include "opto/c2_MacroAssembler.hpp" |
| #include "opto/intrinsicnode.hpp" |
| #include "opto/output.hpp" |
| #include "opto/opcodes.hpp" |
| #include "opto/subnode.hpp" |
| #include "runtime/globals.hpp" |
| #include "runtime/objectMonitor.hpp" |
| #include "runtime/stubRoutines.hpp" |
| #include "utilities/checkedCast.hpp" |
| #include "utilities/globalDefinitions.hpp" |
| #include "utilities/powerOfTwo.hpp" |
| #include "utilities/sizes.hpp" |
| |
| #ifdef PRODUCT |
| #define BLOCK_COMMENT(str) /* nothing */ |
| #define STOP(error) stop(error) |
| #else |
| #define BLOCK_COMMENT(str) block_comment(str) |
| #define STOP(error) block_comment(error); stop(error) |
| #endif |
| |
| // C2 compiled method's prolog code. |
| void C2_MacroAssembler::verified_entry(int framesize, int stack_bang_size, bool fp_mode_24b, bool is_stub) { |
| |
| // WARNING: Initial instruction MUST be 5 bytes or longer so that |
| // NativeJump::patch_verified_entry will be able to patch out the entry |
| // code safely. The push to verify stack depth is ok at 5 bytes, |
| // the frame allocation can be either 3 or 6 bytes. So if we don't do |
| // stack bang then we must use the 6 byte frame allocation even if |
| // we have no frame. :-( |
| assert(stack_bang_size >= framesize || stack_bang_size <= 0, "stack bang size incorrect"); |
| |
| assert((framesize & (StackAlignmentInBytes-1)) == 0, "frame size not aligned"); |
| // Remove word for return addr |
| framesize -= wordSize; |
| stack_bang_size -= wordSize; |
| |
| // Calls to C2R adapters often do not accept exceptional returns. |
| // We require that their callers must bang for them. But be careful, because |
| // some VM calls (such as call site linkage) can use several kilobytes of |
| // stack. But the stack safety zone should account for that. |
| // See bugs 4446381, 4468289, 4497237. |
| if (stack_bang_size > 0) { |
| generate_stack_overflow_check(stack_bang_size); |
| |
| // We always push rbp, so that on return to interpreter rbp, will be |
| // restored correctly and we can correct the stack. |
| push(rbp); |
| // Save caller's stack pointer into RBP if the frame pointer is preserved. |
| if (PreserveFramePointer) { |
| mov(rbp, rsp); |
| } |
| // Remove word for ebp |
| framesize -= wordSize; |
| |
| // Create frame |
| if (framesize) { |
| subptr(rsp, framesize); |
| } |
| } else { |
| // Create frame (force generation of a 4 byte immediate value) |
| subptr_imm32(rsp, framesize); |
| |
| // Save RBP register now. |
| framesize -= wordSize; |
| movptr(Address(rsp, framesize), rbp); |
| // Save caller's stack pointer into RBP if the frame pointer is preserved. |
| if (PreserveFramePointer) { |
| movptr(rbp, rsp); |
| if (framesize > 0) { |
| addptr(rbp, framesize); |
| } |
| } |
| } |
| |
| if (VerifyStackAtCalls) { // Majik cookie to verify stack depth |
| framesize -= wordSize; |
| movptr(Address(rsp, framesize), (int32_t)0xbadb100d); |
| } |
| |
| #ifdef ASSERT |
| if (VerifyStackAtCalls) { |
| Label L; |
| push(rax); |
| mov(rax, rsp); |
| andptr(rax, StackAlignmentInBytes-1); |
| cmpptr(rax, StackAlignmentInBytes-wordSize); |
| pop(rax); |
| jcc(Assembler::equal, L); |
| STOP("Stack is not properly aligned!"); |
| bind(L); |
| } |
| #endif |
| |
| if (!is_stub) { |
| BarrierSetAssembler* bs = BarrierSet::barrier_set()->barrier_set_assembler(); |
| // We put the non-hot code of the nmethod entry barrier out-of-line in a stub. |
| Label dummy_slow_path; |
| Label dummy_continuation; |
| Label* slow_path = &dummy_slow_path; |
| Label* continuation = &dummy_continuation; |
| if (!Compile::current()->output()->in_scratch_emit_size()) { |
| // Use real labels from actual stub when not emitting code for the purpose of measuring its size |
| C2EntryBarrierStub* stub = new (Compile::current()->comp_arena()) C2EntryBarrierStub(); |
| Compile::current()->output()->add_stub(stub); |
| slow_path = &stub->entry(); |
| continuation = &stub->continuation(); |
| } |
| bs->nmethod_entry_barrier(this, slow_path, continuation); |
| } |
| } |
| |
| inline Assembler::AvxVectorLen C2_MacroAssembler::vector_length_encoding(int vlen_in_bytes) { |
| switch (vlen_in_bytes) { |
| case 4: // fall-through |
| case 8: // fall-through |
| case 16: return Assembler::AVX_128bit; |
| case 32: return Assembler::AVX_256bit; |
| case 64: return Assembler::AVX_512bit; |
| |
| default: { |
| ShouldNotReachHere(); |
| return Assembler::AVX_NoVec; |
| } |
| } |
| } |
| |
| // fast_lock and fast_unlock used by C2 |
| |
| // Because the transitions from emitted code to the runtime |
| // monitorenter/exit helper stubs are so slow it's critical that |
| // we inline both the stack-locking fast path and the inflated fast path. |
| // |
| // See also: cmpFastLock and cmpFastUnlock. |
| // |
| // What follows is a specialized inline transliteration of the code |
| // in enter() and exit(). If we're concerned about I$ bloat another |
| // option would be to emit TrySlowEnter and TrySlowExit methods |
| // at startup-time. These methods would accept arguments as |
| // (rax,=Obj, rbx=Self, rcx=box, rdx=Scratch) and return success-failure |
| // indications in the icc.ZFlag. fast_lock and fast_unlock would simply |
| // marshal the arguments and emit calls to TrySlowEnter and TrySlowExit. |
| // In practice, however, the # of lock sites is bounded and is usually small. |
| // Besides the call overhead, TrySlowEnter and TrySlowExit might suffer |
| // if the processor uses simple bimodal branch predictors keyed by EIP |
| // Since the helper routines would be called from multiple synchronization |
| // sites. |
| // |
| // An even better approach would be write "MonitorEnter()" and "MonitorExit()" |
| // in java - using j.u.c and unsafe - and just bind the lock and unlock sites |
| // to those specialized methods. That'd give us a mostly platform-independent |
| // implementation that the JITs could optimize and inline at their pleasure. |
| // Done correctly, the only time we'd need to cross to native could would be |
| // to park() or unpark() threads. We'd also need a few more unsafe operators |
| // to (a) prevent compiler-JIT reordering of non-volatile accesses, and |
| // (b) explicit barriers or fence operations. |
| // |
| // TODO: |
| // |
| // * Arrange for C2 to pass "Self" into fast_lock and fast_unlock in one of the registers (scr). |
| // This avoids manifesting the Self pointer in the fast_lock and fast_unlock terminals. |
| // Given TLAB allocation, Self is usually manifested in a register, so passing it into |
| // the lock operators would typically be faster than reifying Self. |
| // |
| // * Ideally I'd define the primitives as: |
| // fast_lock (nax Obj, nax box, EAX tmp, nax scr) where box, tmp and scr are KILLED. |
| // fast_unlock (nax Obj, EAX box, nax tmp) where box and tmp are KILLED |
| // Unfortunately ADLC bugs prevent us from expressing the ideal form. |
| // Instead, we're stuck with a rather awkward and brittle register assignments below. |
| // Furthermore the register assignments are overconstrained, possibly resulting in |
| // sub-optimal code near the synchronization site. |
| // |
| // * Eliminate the sp-proximity tests and just use "== Self" tests instead. |
| // Alternately, use a better sp-proximity test. |
| // |
| // * Currently ObjectMonitor._Owner can hold either an sp value or a (THREAD *) value. |
| // Either one is sufficient to uniquely identify a thread. |
| // TODO: eliminate use of sp in _owner and use get_thread(tr) instead. |
| // |
| // * Intrinsify notify() and notifyAll() for the common cases where the |
| // object is locked by the calling thread but the waitlist is empty. |
| // avoid the expensive JNI call to JVM_Notify() and JVM_NotifyAll(). |
| // |
| // * use jccb and jmpb instead of jcc and jmp to improve code density. |
| // But beware of excessive branch density on AMD Opterons. |
| // |
| // * Both fast_lock and fast_unlock set the ICC.ZF to indicate success |
| // or failure of the fast path. If the fast path fails then we pass |
| // control to the slow path, typically in C. In fast_lock and |
| // fast_unlock we often branch to DONE_LABEL, just to find that C2 |
| // will emit a conditional branch immediately after the node. |
| // So we have branches to branches and lots of ICC.ZF games. |
| // Instead, it might be better to have C2 pass a "FailureLabel" |
| // into fast_lock and fast_unlock. In the case of success, control |
| // will drop through the node. ICC.ZF is undefined at exit. |
| // In the case of failure, the node will branch directly to the |
| // FailureLabel |
| |
| |
| // obj: object to lock |
| // box: on-stack box address (displaced header location) - KILLED |
| // rax,: tmp -- KILLED |
| // scr: tmp -- KILLED |
| void C2_MacroAssembler::fast_lock(Register objReg, Register boxReg, Register tmpReg, |
| Register scrReg, Register cx1Reg, Register cx2Reg, Register thread, |
| Metadata* method_data) { |
| assert(LockingMode != LM_LIGHTWEIGHT, "lightweight locking should use fast_lock_lightweight"); |
| // Ensure the register assignments are disjoint |
| assert(tmpReg == rax, ""); |
| assert(cx1Reg == noreg, ""); |
| assert(cx2Reg == noreg, ""); |
| assert_different_registers(objReg, boxReg, tmpReg, scrReg); |
| |
| // Possible cases that we'll encounter in fast_lock |
| // ------------------------------------------------ |
| // * Inflated |
| // -- unlocked |
| // -- Locked |
| // = by self |
| // = by other |
| // * neutral |
| // * stack-locked |
| // -- by self |
| // = sp-proximity test hits |
| // = sp-proximity test generates false-negative |
| // -- by other |
| // |
| |
| Label IsInflated, DONE_LABEL, NO_COUNT, COUNT; |
| |
| if (DiagnoseSyncOnValueBasedClasses != 0) { |
| load_klass(tmpReg, objReg, scrReg); |
| testb(Address(tmpReg, Klass::misc_flags_offset()), KlassFlags::_misc_is_value_based_class); |
| jcc(Assembler::notZero, DONE_LABEL); |
| } |
| |
| movptr(tmpReg, Address(objReg, oopDesc::mark_offset_in_bytes())); // [FETCH] |
| testptr(tmpReg, markWord::monitor_value); // inflated vs stack-locked|neutral |
| jcc(Assembler::notZero, IsInflated); |
| |
| if (LockingMode == LM_MONITOR) { |
| // Clear ZF so that we take the slow path at the DONE label. objReg is known to be not 0. |
| testptr(objReg, objReg); |
| } else { |
| assert(LockingMode == LM_LEGACY, "must be"); |
| // Attempt stack-locking ... |
| orptr (tmpReg, markWord::unlocked_value); |
| movptr(Address(boxReg, 0), tmpReg); // Anticipate successful CAS |
| lock(); |
| cmpxchgptr(boxReg, Address(objReg, oopDesc::mark_offset_in_bytes())); // Updates tmpReg |
| jcc(Assembler::equal, COUNT); // Success |
| |
| // Recursive locking. |
| // The object is stack-locked: markword contains stack pointer to BasicLock. |
| // Locked by current thread if difference with current SP is less than one page. |
| subptr(tmpReg, rsp); |
| // Next instruction set ZFlag == 1 (Success) if difference is less then one page. |
| andptr(tmpReg, (int32_t) (7 - (int)os::vm_page_size()) ); |
| movptr(Address(boxReg, 0), tmpReg); |
| } |
| jmp(DONE_LABEL); |
| |
| bind(IsInflated); |
| // The object is inflated. tmpReg contains pointer to ObjectMonitor* + markWord::monitor_value |
| |
| // Unconditionally set box->_displaced_header = markWord::unused_mark(). |
| // Without cast to int32_t this style of movptr will destroy r10 which is typically obj. |
| movptr(Address(boxReg, 0), checked_cast<int32_t>(markWord::unused_mark().value())); |
| |
| // It's inflated and we use scrReg for ObjectMonitor* in this section. |
| movptr(boxReg, Address(r15_thread, JavaThread::monitor_owner_id_offset())); |
| movq(scrReg, tmpReg); |
| xorq(tmpReg, tmpReg); |
| lock(); |
| cmpxchgptr(boxReg, Address(scrReg, OM_OFFSET_NO_MONITOR_VALUE_TAG(owner))); |
| |
| // Propagate ICC.ZF from CAS above into DONE_LABEL. |
| jccb(Assembler::equal, COUNT); // CAS above succeeded; propagate ZF = 1 (success) |
| |
| cmpptr(boxReg, rax); // Check if we are already the owner (recursive lock) |
| jccb(Assembler::notEqual, NO_COUNT); // If not recursive, ZF = 0 at this point (fail) |
| incq(Address(scrReg, OM_OFFSET_NO_MONITOR_VALUE_TAG(recursions))); |
| xorq(rax, rax); // Set ZF = 1 (success) for recursive lock, denoting locking success |
| bind(DONE_LABEL); |
| |
| // ZFlag == 1 count in fast path |
| // ZFlag == 0 count in slow path |
| jccb(Assembler::notZero, NO_COUNT); // jump if ZFlag == 0 |
| |
| bind(COUNT); |
| if (LockingMode == LM_LEGACY) { |
| // Count monitors in fast path |
| increment(Address(thread, JavaThread::held_monitor_count_offset())); |
| } |
| xorl(tmpReg, tmpReg); // Set ZF == 1 |
| |
| bind(NO_COUNT); |
| |
| // At NO_COUNT the icc ZFlag is set as follows ... |
| // fast_unlock uses the same protocol. |
| // ZFlag == 1 -> Success |
| // ZFlag == 0 -> Failure - force control through the slow path |
| } |
| |
| // obj: object to unlock |
| // box: box address (displaced header location), killed. Must be EAX. |
| // tmp: killed, cannot be obj nor box. |
| // |
| // Some commentary on balanced locking: |
| // |
| // fast_lock and fast_unlock are emitted only for provably balanced lock sites. |
| // Methods that don't have provably balanced locking are forced to run in the |
| // interpreter - such methods won't be compiled to use fast_lock and fast_unlock. |
| // The interpreter provides two properties: |
| // I1: At return-time the interpreter automatically and quietly unlocks any |
| // objects acquired the current activation (frame). Recall that the |
| // interpreter maintains an on-stack list of locks currently held by |
| // a frame. |
| // I2: If a method attempts to unlock an object that is not held by the |
| // the frame the interpreter throws IMSX. |
| // |
| // Lets say A(), which has provably balanced locking, acquires O and then calls B(). |
| // B() doesn't have provably balanced locking so it runs in the interpreter. |
| // Control returns to A() and A() unlocks O. By I1 and I2, above, we know that O |
| // is still locked by A(). |
| // |
| // The only other source of unbalanced locking would be JNI. The "Java Native Interface: |
| // Programmer's Guide and Specification" claims that an object locked by jni_monitorenter |
| // should not be unlocked by "normal" java-level locking and vice-versa. The specification |
| // doesn't specify what will occur if a program engages in such mixed-mode locking, however. |
| // Arguably given that the spec legislates the JNI case as undefined our implementation |
| // could reasonably *avoid* checking owner in fast_unlock(). |
| // In the interest of performance we elide m->Owner==Self check in unlock. |
| // A perfectly viable alternative is to elide the owner check except when |
| // Xcheck:jni is enabled. |
| |
| void C2_MacroAssembler::fast_unlock(Register objReg, Register boxReg, Register tmpReg) { |
| assert(LockingMode != LM_LIGHTWEIGHT, "lightweight locking should use fast_unlock_lightweight"); |
| assert(boxReg == rax, ""); |
| assert_different_registers(objReg, boxReg, tmpReg); |
| |
| Label DONE_LABEL, Stacked, COUNT, NO_COUNT; |
| |
| if (LockingMode == LM_LEGACY) { |
| cmpptr(Address(boxReg, 0), NULL_WORD); // Examine the displaced header |
| jcc (Assembler::zero, COUNT); // 0 indicates recursive stack-lock |
| } |
| movptr(tmpReg, Address(objReg, oopDesc::mark_offset_in_bytes())); // Examine the object's markword |
| if (LockingMode != LM_MONITOR) { |
| testptr(tmpReg, markWord::monitor_value); // Inflated? |
| jcc(Assembler::zero, Stacked); |
| } |
| |
| // It's inflated. |
| |
| // Despite our balanced locking property we still check that m->_owner == Self |
| // as java routines or native JNI code called by this thread might |
| // have released the lock. |
| // |
| // If there's no contention try a 1-0 exit. That is, exit without |
| // a costly MEMBAR or CAS. See synchronizer.cpp for details on how |
| // we detect and recover from the race that the 1-0 exit admits. |
| // |
| // Conceptually fast_unlock() must execute a STST|LDST "release" barrier |
| // before it STs null into _owner, releasing the lock. Updates |
| // to data protected by the critical section must be visible before |
| // we drop the lock (and thus before any other thread could acquire |
| // the lock and observe the fields protected by the lock). |
| // IA32's memory-model is SPO, so STs are ordered with respect to |
| // each other and there's no need for an explicit barrier (fence). |
| // See also http://gee.cs.oswego.edu/dl/jmm/cookbook.html. |
| Label LSuccess, LNotRecursive; |
| |
| cmpptr(Address(tmpReg, OM_OFFSET_NO_MONITOR_VALUE_TAG(recursions)), 0); |
| jccb(Assembler::equal, LNotRecursive); |
| |
| // Recursive inflated unlock |
| decrement(Address(tmpReg, OM_OFFSET_NO_MONITOR_VALUE_TAG(recursions))); |
| jmpb(LSuccess); |
| |
| bind(LNotRecursive); |
| |
| // Set owner to null. |
| // Release to satisfy the JMM |
| movptr(Address(tmpReg, OM_OFFSET_NO_MONITOR_VALUE_TAG(owner)), NULL_WORD); |
| // We need a full fence after clearing owner to avoid stranding. |
| // StoreLoad achieves this. |
| membar(StoreLoad); |
| |
| // Check if the entry_list is empty. |
| cmpptr(Address(tmpReg, OM_OFFSET_NO_MONITOR_VALUE_TAG(entry_list)), NULL_WORD); |
| jccb(Assembler::zero, LSuccess); // If so we are done. |
| |
| // Check if there is a successor. |
| cmpptr(Address(tmpReg, OM_OFFSET_NO_MONITOR_VALUE_TAG(succ)), NULL_WORD); |
| jccb(Assembler::notZero, LSuccess); // If so we are done. |
| |
| // Save the monitor pointer in the current thread, so we can try to |
| // reacquire the lock in SharedRuntime::monitor_exit_helper(). |
| andptr(tmpReg, ~(int32_t)markWord::monitor_value); |
| movptr(Address(r15_thread, JavaThread::unlocked_inflated_monitor_offset()), tmpReg); |
| |
| orl (boxReg, 1); // set ICC.ZF=0 to indicate failure |
| jmpb (DONE_LABEL); |
| |
| bind (LSuccess); |
| testl (boxReg, 0); // set ICC.ZF=1 to indicate success |
| jmpb (DONE_LABEL); |
| |
| if (LockingMode == LM_LEGACY) { |
| bind (Stacked); |
| movptr(tmpReg, Address (boxReg, 0)); // re-fetch |
| lock(); |
| cmpxchgptr(tmpReg, Address(objReg, oopDesc::mark_offset_in_bytes())); // Uses RAX which is box |
| // Intentional fall-thru into DONE_LABEL |
| } |
| |
| bind(DONE_LABEL); |
| |
| // ZFlag == 1 count in fast path |
| // ZFlag == 0 count in slow path |
| jccb(Assembler::notZero, NO_COUNT); |
| |
| bind(COUNT); |
| |
| if (LockingMode == LM_LEGACY) { |
| // Count monitors in fast path |
| decrementq(Address(r15_thread, JavaThread::held_monitor_count_offset())); |
| } |
| |
| xorl(tmpReg, tmpReg); // Set ZF == 1 |
| |
| bind(NO_COUNT); |
| } |
| |
| void C2_MacroAssembler::fast_lock_lightweight(Register obj, Register box, Register rax_reg, |
| Register t, Register thread) { |
| assert(LockingMode == LM_LIGHTWEIGHT, "must be"); |
| assert(rax_reg == rax, "Used for CAS"); |
| assert_different_registers(obj, box, rax_reg, t, thread); |
| |
| // Handle inflated monitor. |
| Label inflated; |
| // Finish fast lock successfully. ZF value is irrelevant. |
| Label locked; |
| // Finish fast lock unsuccessfully. MUST jump with ZF == 0 |
| Label slow_path; |
| |
| if (UseObjectMonitorTable) { |
| // Clear cache in case fast locking succeeds or we need to take the slow-path. |
| movptr(Address(box, BasicLock::object_monitor_cache_offset_in_bytes()), 0); |
| } |
| |
| if (DiagnoseSyncOnValueBasedClasses != 0) { |
| load_klass(rax_reg, obj, t); |
| testb(Address(rax_reg, Klass::misc_flags_offset()), KlassFlags::_misc_is_value_based_class); |
| jcc(Assembler::notZero, slow_path); |
| } |
| |
| const Register mark = t; |
| |
| { // Lightweight Lock |
| |
| Label push; |
| |
| const Register top = UseObjectMonitorTable ? rax_reg : box; |
| |
| // Load the mark. |
| movptr(mark, Address(obj, oopDesc::mark_offset_in_bytes())); |
| |
| // Prefetch top. |
| movl(top, Address(thread, JavaThread::lock_stack_top_offset())); |
| |
| // Check for monitor (0b10). |
| testptr(mark, markWord::monitor_value); |
| jcc(Assembler::notZero, inflated); |
| |
| // Check if lock-stack is full. |
| cmpl(top, LockStack::end_offset() - 1); |
| jcc(Assembler::greater, slow_path); |
| |
| // Check if recursive. |
| cmpptr(obj, Address(thread, top, Address::times_1, -oopSize)); |
| jccb(Assembler::equal, push); |
| |
| // Try to lock. Transition lock bits 0b01 => 0b00 |
| movptr(rax_reg, mark); |
| orptr(rax_reg, markWord::unlocked_value); |
| andptr(mark, ~(int32_t)markWord::unlocked_value); |
| lock(); cmpxchgptr(mark, Address(obj, oopDesc::mark_offset_in_bytes())); |
| jcc(Assembler::notEqual, slow_path); |
| |
| if (UseObjectMonitorTable) { |
| // Need to reload top, clobbered by CAS. |
| movl(top, Address(thread, JavaThread::lock_stack_top_offset())); |
| } |
| bind(push); |
| // After successful lock, push object on lock-stack. |
| movptr(Address(thread, top), obj); |
| addl(Address(thread, JavaThread::lock_stack_top_offset()), oopSize); |
| jmpb(locked); |
| } |
| |
| { // Handle inflated monitor. |
| bind(inflated); |
| |
| const Register monitor = t; |
| |
| if (!UseObjectMonitorTable) { |
| assert(mark == monitor, "should be the same here"); |
| } else { |
| // Uses ObjectMonitorTable. Look for the monitor in the om_cache. |
| // Fetch ObjectMonitor* from the cache or take the slow-path. |
| Label monitor_found; |
| |
| // Load cache address |
| lea(t, Address(thread, JavaThread::om_cache_oops_offset())); |
| |
| const int num_unrolled = 2; |
| for (int i = 0; i < num_unrolled; i++) { |
| cmpptr(obj, Address(t)); |
| jccb(Assembler::equal, monitor_found); |
| increment(t, in_bytes(OMCache::oop_to_oop_difference())); |
| } |
| |
| Label loop; |
| |
| // Search for obj in cache. |
| bind(loop); |
| |
| // Check for match. |
| cmpptr(obj, Address(t)); |
| jccb(Assembler::equal, monitor_found); |
| |
| // Search until null encountered, guaranteed _null_sentinel at end. |
| cmpptr(Address(t), 1); |
| jcc(Assembler::below, slow_path); // 0 check, but with ZF=0 when *t == 0 |
| increment(t, in_bytes(OMCache::oop_to_oop_difference())); |
| jmpb(loop); |
| |
| // Cache hit. |
| bind(monitor_found); |
| movptr(monitor, Address(t, OMCache::oop_to_monitor_difference())); |
| } |
| const ByteSize monitor_tag = in_ByteSize(UseObjectMonitorTable ? 0 : checked_cast<int>(markWord::monitor_value)); |
| const Address recursions_address(monitor, ObjectMonitor::recursions_offset() - monitor_tag); |
| const Address owner_address(monitor, ObjectMonitor::owner_offset() - monitor_tag); |
| |
| Label monitor_locked; |
| // Lock the monitor. |
| |
| if (UseObjectMonitorTable) { |
| // Cache the monitor for unlock before trashing box. On failure to acquire |
| // the lock, the slow path will reset the entry accordingly (see CacheSetter). |
| movptr(Address(box, BasicLock::object_monitor_cache_offset_in_bytes()), monitor); |
| } |
| |
| // Try to CAS owner (no owner => current thread's _monitor_owner_id). |
| xorptr(rax_reg, rax_reg); |
| movptr(box, Address(thread, JavaThread::monitor_owner_id_offset())); |
| lock(); cmpxchgptr(box, owner_address); |
| jccb(Assembler::equal, monitor_locked); |
| |
| // Check if recursive. |
| cmpptr(box, rax_reg); |
| jccb(Assembler::notEqual, slow_path); |
| |
| // Recursive. |
| increment(recursions_address); |
| |
| bind(monitor_locked); |
| } |
| |
| bind(locked); |
| // Set ZF = 1 |
| xorl(rax_reg, rax_reg); |
| |
| #ifdef ASSERT |
| // Check that locked label is reached with ZF set. |
| Label zf_correct; |
| Label zf_bad_zero; |
| jcc(Assembler::zero, zf_correct); |
| jmp(zf_bad_zero); |
| #endif |
| |
| bind(slow_path); |
| #ifdef ASSERT |
| // Check that slow_path label is reached with ZF not set. |
| jcc(Assembler::notZero, zf_correct); |
| stop("Fast Lock ZF != 0"); |
| bind(zf_bad_zero); |
| stop("Fast Lock ZF != 1"); |
| bind(zf_correct); |
| #endif |
| // C2 uses the value of ZF to determine the continuation. |
| } |
| |
| void C2_MacroAssembler::fast_unlock_lightweight(Register obj, Register reg_rax, Register t, Register thread) { |
| assert(LockingMode == LM_LIGHTWEIGHT, "must be"); |
| assert(reg_rax == rax, "Used for CAS"); |
| assert_different_registers(obj, reg_rax, t); |
| |
| // Handle inflated monitor. |
| Label inflated, inflated_check_lock_stack; |
| // Finish fast unlock successfully. MUST jump with ZF == 1 |
| Label unlocked, slow_path; |
| |
| const Register mark = t; |
| const Register monitor = t; |
| const Register top = UseObjectMonitorTable ? t : reg_rax; |
| const Register box = reg_rax; |
| |
| Label dummy; |
| C2FastUnlockLightweightStub* stub = nullptr; |
| |
| if (!Compile::current()->output()->in_scratch_emit_size()) { |
| stub = new (Compile::current()->comp_arena()) C2FastUnlockLightweightStub(obj, mark, reg_rax, thread); |
| Compile::current()->output()->add_stub(stub); |
| } |
| |
| Label& push_and_slow_path = stub == nullptr ? dummy : stub->push_and_slow_path(); |
| |
| { // Lightweight Unlock |
| |
| // Load top. |
| movl(top, Address(thread, JavaThread::lock_stack_top_offset())); |
| |
| if (!UseObjectMonitorTable) { |
| // Prefetch mark. |
| movptr(mark, Address(obj, oopDesc::mark_offset_in_bytes())); |
| } |
| |
| // Check if obj is top of lock-stack. |
| cmpptr(obj, Address(thread, top, Address::times_1, -oopSize)); |
| // Top of lock stack was not obj. Must be monitor. |
| jcc(Assembler::notEqual, inflated_check_lock_stack); |
| |
| // Pop lock-stack. |
| DEBUG_ONLY(movptr(Address(thread, top, Address::times_1, -oopSize), 0);) |
| subl(Address(thread, JavaThread::lock_stack_top_offset()), oopSize); |
| |
| // Check if recursive. |
| cmpptr(obj, Address(thread, top, Address::times_1, -2 * oopSize)); |
| jcc(Assembler::equal, unlocked); |
| |
| // We elide the monitor check, let the CAS fail instead. |
| |
| if (UseObjectMonitorTable) { |
| // Load mark. |
| movptr(mark, Address(obj, oopDesc::mark_offset_in_bytes())); |
| } |
| |
| // Try to unlock. Transition lock bits 0b00 => 0b01 |
| movptr(reg_rax, mark); |
| andptr(reg_rax, ~(int32_t)markWord::lock_mask); |
| orptr(mark, markWord::unlocked_value); |
| lock(); cmpxchgptr(mark, Address(obj, oopDesc::mark_offset_in_bytes())); |
| jcc(Assembler::notEqual, push_and_slow_path); |
| jmp(unlocked); |
| } |
| |
| |
| { // Handle inflated monitor. |
| bind(inflated_check_lock_stack); |
| #ifdef ASSERT |
| Label check_done; |
| subl(top, oopSize); |
| cmpl(top, in_bytes(JavaThread::lock_stack_base_offset())); |
| jcc(Assembler::below, check_done); |
| cmpptr(obj, Address(thread, top)); |
| jccb(Assembler::notEqual, inflated_check_lock_stack); |
| stop("Fast Unlock lock on stack"); |
| bind(check_done); |
| if (UseObjectMonitorTable) { |
| movptr(mark, Address(obj, oopDesc::mark_offset_in_bytes())); |
| } |
| testptr(mark, markWord::monitor_value); |
| jccb(Assembler::notZero, inflated); |
| stop("Fast Unlock not monitor"); |
| #endif |
| |
| bind(inflated); |
| |
| if (!UseObjectMonitorTable) { |
| assert(mark == monitor, "should be the same here"); |
| } else { |
| // Uses ObjectMonitorTable. Look for the monitor in our BasicLock on the stack. |
| movptr(monitor, Address(box, BasicLock::object_monitor_cache_offset_in_bytes())); |
| // null check with ZF == 0, no valid pointer below alignof(ObjectMonitor*) |
| cmpptr(monitor, alignof(ObjectMonitor*)); |
| jcc(Assembler::below, slow_path); |
| } |
| const ByteSize monitor_tag = in_ByteSize(UseObjectMonitorTable ? 0 : checked_cast<int>(markWord::monitor_value)); |
| const Address recursions_address{monitor, ObjectMonitor::recursions_offset() - monitor_tag}; |
| const Address succ_address{monitor, ObjectMonitor::succ_offset() - monitor_tag}; |
| const Address entry_list_address{monitor, ObjectMonitor::entry_list_offset() - monitor_tag}; |
| const Address owner_address{monitor, ObjectMonitor::owner_offset() - monitor_tag}; |
| |
| Label recursive; |
| |
| // Check if recursive. |
| cmpptr(recursions_address, 0); |
| jccb(Assembler::notZero, recursive); |
| |
| // Set owner to null. |
| // Release to satisfy the JMM |
| movptr(owner_address, NULL_WORD); |
| // We need a full fence after clearing owner to avoid stranding. |
| // StoreLoad achieves this. |
| membar(StoreLoad); |
| |
| // Check if the entry_list is empty. |
| cmpptr(entry_list_address, NULL_WORD); |
| jccb(Assembler::zero, unlocked); // If so we are done. |
| |
| // Check if there is a successor. |
| cmpptr(succ_address, NULL_WORD); |
| jccb(Assembler::notZero, unlocked); // If so we are done. |
| |
| // Save the monitor pointer in the current thread, so we can try to |
| // reacquire the lock in SharedRuntime::monitor_exit_helper(). |
| if (!UseObjectMonitorTable) { |
| andptr(monitor, ~(int32_t)markWord::monitor_value); |
| } |
| movptr(Address(thread, JavaThread::unlocked_inflated_monitor_offset()), monitor); |
| |
| orl(t, 1); // Fast Unlock ZF = 0 |
| jmpb(slow_path); |
| |
| // Recursive unlock. |
| bind(recursive); |
| decrement(recursions_address); |
| } |
| |
| bind(unlocked); |
| xorl(t, t); // Fast Unlock ZF = 1 |
| |
| #ifdef ASSERT |
| // Check that unlocked label is reached with ZF set. |
| Label zf_correct; |
| Label zf_bad_zero; |
| jcc(Assembler::zero, zf_correct); |
| jmp(zf_bad_zero); |
| #endif |
| |
| bind(slow_path); |
| if (stub != nullptr) { |
| bind(stub->slow_path_continuation()); |
| } |
| #ifdef ASSERT |
| // Check that stub->continuation() label is reached with ZF not set. |
| jcc(Assembler::notZero, zf_correct); |
| stop("Fast Unlock ZF != 0"); |
| bind(zf_bad_zero); |
| stop("Fast Unlock ZF != 1"); |
| bind(zf_correct); |
| #endif |
| // C2 uses the value of ZF to determine the continuation. |
| } |
| |
| static void abort_verify_int_in_range(uint idx, jint val, jint lo, jint hi) { |
| fatal("Invalid CastII, idx: %u, val: %d, lo: %d, hi: %d", idx, val, lo, hi); |
| } |
| |
| static void reconstruct_frame_pointer_helper(MacroAssembler* masm, Register dst) { |
| const int framesize = Compile::current()->output()->frame_size_in_bytes(); |
| masm->movptr(dst, rsp); |
| if (framesize > 2 * wordSize) { |
| masm->addptr(dst, framesize - 2 * wordSize); |
| } |
| } |
| |
| void C2_MacroAssembler::reconstruct_frame_pointer(Register rtmp) { |
| if (PreserveFramePointer) { |
| // frame pointer is valid |
| #ifdef ASSERT |
| // Verify frame pointer value in rbp. |
| reconstruct_frame_pointer_helper(this, rtmp); |
| Label L_success; |
| cmpq(rbp, rtmp); |
| jccb(Assembler::equal, L_success); |
| STOP("frame pointer mismatch"); |
| bind(L_success); |
| #endif // ASSERT |
| } else { |
| reconstruct_frame_pointer_helper(this, rbp); |
| } |
| } |
| |
| void C2_MacroAssembler::verify_int_in_range(uint idx, const TypeInt* t, Register val) { |
| jint lo = t->_lo; |
| jint hi = t->_hi; |
| assert(lo < hi, "type should not be empty or constant, idx: %u, lo: %d, hi: %d", idx, lo, hi); |
| if (t == TypeInt::INT) { |
| return; |
| } |
| |
| BLOCK_COMMENT("CastII {"); |
| Label fail; |
| Label succeed; |
| if (hi == max_jint) { |
| cmpl(val, lo); |
| jccb(Assembler::greaterEqual, succeed); |
| } else { |
| if (lo != min_jint) { |
| cmpl(val, lo); |
| jccb(Assembler::less, fail); |
| } |
| cmpl(val, hi); |
| jccb(Assembler::lessEqual, succeed); |
| } |
| |
| bind(fail); |
| movl(c_rarg0, idx); |
| movl(c_rarg1, val); |
| movl(c_rarg2, lo); |
| movl(c_rarg3, hi); |
| reconstruct_frame_pointer(rscratch1); |
| call(RuntimeAddress(CAST_FROM_FN_PTR(address, abort_verify_int_in_range))); |
| hlt(); |
| bind(succeed); |
| BLOCK_COMMENT("} // CastII"); |
| } |
| |
| static void abort_verify_long_in_range(uint idx, jlong val, jlong lo, jlong hi) { |
| fatal("Invalid CastLL, idx: %u, val: " JLONG_FORMAT ", lo: " JLONG_FORMAT ", hi: " JLONG_FORMAT, idx, val, lo, hi); |
| } |
| |
| void C2_MacroAssembler::verify_long_in_range(uint idx, const TypeLong* t, Register val, Register tmp) { |
| jlong lo = t->_lo; |
| jlong hi = t->_hi; |
| assert(lo < hi, "type should not be empty or constant, idx: %u, lo: " JLONG_FORMAT ", hi: " JLONG_FORMAT, idx, lo, hi); |
| if (t == TypeLong::LONG) { |
| return; |
| } |
| |
| BLOCK_COMMENT("CastLL {"); |
| Label fail; |
| Label succeed; |
| |
| auto cmp_val = [&](jlong bound) { |
| if (is_simm32(bound)) { |
| cmpq(val, checked_cast<int>(bound)); |
| } else { |
| mov64(tmp, bound); |
| cmpq(val, tmp); |
| } |
| }; |
| |
| if (hi == max_jlong) { |
| cmp_val(lo); |
| jccb(Assembler::greaterEqual, succeed); |
| } else { |
| if (lo != min_jlong) { |
| cmp_val(lo); |
| jccb(Assembler::less, fail); |
| } |
| cmp_val(hi); |
| jccb(Assembler::lessEqual, succeed); |
| } |
| |
| bind(fail); |
| movl(c_rarg0, idx); |
| movq(c_rarg1, val); |
| mov64(c_rarg2, lo); |
| mov64(c_rarg3, hi); |
| reconstruct_frame_pointer(rscratch1); |
| call(RuntimeAddress(CAST_FROM_FN_PTR(address, abort_verify_long_in_range))); |
| hlt(); |
| bind(succeed); |
| BLOCK_COMMENT("} // CastLL"); |
| } |
| |
| //------------------------------------------------------------------------------------------- |
| // Generic instructions support for use in .ad files C2 code generation |
| |
| void C2_MacroAssembler::vabsnegd(int opcode, XMMRegister dst, XMMRegister src) { |
| if (dst != src) { |
| movdqu(dst, src); |
| } |
| if (opcode == Op_AbsVD) { |
| andpd(dst, ExternalAddress(StubRoutines::x86::vector_double_sign_mask()), noreg); |
| } else { |
| assert((opcode == Op_NegVD),"opcode should be Op_NegD"); |
| xorpd(dst, ExternalAddress(StubRoutines::x86::vector_double_sign_flip()), noreg); |
| } |
| } |
| |
| void C2_MacroAssembler::vabsnegd(int opcode, XMMRegister dst, XMMRegister src, int vector_len) { |
| if (opcode == Op_AbsVD) { |
| vandpd(dst, src, ExternalAddress(StubRoutines::x86::vector_double_sign_mask()), vector_len, noreg); |
| } else { |
| assert((opcode == Op_NegVD),"opcode should be Op_NegD"); |
| vxorpd(dst, src, ExternalAddress(StubRoutines::x86::vector_double_sign_flip()), vector_len, noreg); |
| } |
| } |
| |
| void C2_MacroAssembler::vabsnegf(int opcode, XMMRegister dst, XMMRegister src) { |
| if (dst != src) { |
| movdqu(dst, src); |
| } |
| if (opcode == Op_AbsVF) { |
| andps(dst, ExternalAddress(StubRoutines::x86::vector_float_sign_mask()), noreg); |
| } else { |
| assert((opcode == Op_NegVF),"opcode should be Op_NegF"); |
| xorps(dst, ExternalAddress(StubRoutines::x86::vector_float_sign_flip()), noreg); |
| } |
| } |
| |
| void C2_MacroAssembler::vabsnegf(int opcode, XMMRegister dst, XMMRegister src, int vector_len) { |
| if (opcode == Op_AbsVF) { |
| vandps(dst, src, ExternalAddress(StubRoutines::x86::vector_float_sign_mask()), vector_len, noreg); |
| } else { |
| assert((opcode == Op_NegVF),"opcode should be Op_NegF"); |
| vxorps(dst, src, ExternalAddress(StubRoutines::x86::vector_float_sign_flip()), vector_len, noreg); |
| } |
| } |
| |
| void C2_MacroAssembler::pminmax(int opcode, BasicType elem_bt, XMMRegister dst, XMMRegister src, XMMRegister tmp) { |
| assert(opcode == Op_MinV || opcode == Op_MaxV, "sanity"); |
| assert(tmp == xnoreg || elem_bt == T_LONG, "unused"); |
| |
| if (opcode == Op_MinV) { |
| if (elem_bt == T_BYTE) { |
| pminsb(dst, src); |
| } else if (elem_bt == T_SHORT) { |
| pminsw(dst, src); |
| } else if (elem_bt == T_INT) { |
| pminsd(dst, src); |
| } else { |
| assert(elem_bt == T_LONG, "required"); |
| assert(tmp == xmm0, "required"); |
| assert_different_registers(dst, src, tmp); |
| movdqu(xmm0, dst); |
| pcmpgtq(xmm0, src); |
| blendvpd(dst, src); // xmm0 as mask |
| } |
| } else { // opcode == Op_MaxV |
| if (elem_bt == T_BYTE) { |
| pmaxsb(dst, src); |
| } else if (elem_bt == T_SHORT) { |
| pmaxsw(dst, src); |
| } else if (elem_bt == T_INT) { |
| pmaxsd(dst, src); |
| } else { |
| assert(elem_bt == T_LONG, "required"); |
| assert(tmp == xmm0, "required"); |
| assert_different_registers(dst, src, tmp); |
| movdqu(xmm0, src); |
| pcmpgtq(xmm0, dst); |
| blendvpd(dst, src); // xmm0 as mask |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vpuminmax(int opcode, BasicType elem_bt, XMMRegister dst, |
| XMMRegister src1, Address src2, int vlen_enc) { |
| assert(opcode == Op_UMinV || opcode == Op_UMaxV, "sanity"); |
| if (opcode == Op_UMinV) { |
| switch(elem_bt) { |
| case T_BYTE: vpminub(dst, src1, src2, vlen_enc); break; |
| case T_SHORT: vpminuw(dst, src1, src2, vlen_enc); break; |
| case T_INT: vpminud(dst, src1, src2, vlen_enc); break; |
| case T_LONG: evpminuq(dst, k0, src1, src2, false, vlen_enc); break; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); break; |
| } |
| } else { |
| assert(opcode == Op_UMaxV, "required"); |
| switch(elem_bt) { |
| case T_BYTE: vpmaxub(dst, src1, src2, vlen_enc); break; |
| case T_SHORT: vpmaxuw(dst, src1, src2, vlen_enc); break; |
| case T_INT: vpmaxud(dst, src1, src2, vlen_enc); break; |
| case T_LONG: evpmaxuq(dst, k0, src1, src2, false, vlen_enc); break; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); break; |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vpuminmaxq(int opcode, XMMRegister dst, XMMRegister src1, XMMRegister src2, XMMRegister xtmp1, XMMRegister xtmp2, int vlen_enc) { |
| // For optimality, leverage a full vector width of 512 bits |
| // for operations over smaller vector sizes on AVX512 targets. |
| if (VM_Version::supports_evex() && !VM_Version::supports_avx512vl()) { |
| if (opcode == Op_UMaxV) { |
| evpmaxuq(dst, k0, src1, src2, false, Assembler::AVX_512bit); |
| } else { |
| assert(opcode == Op_UMinV, "required"); |
| evpminuq(dst, k0, src1, src2, false, Assembler::AVX_512bit); |
| } |
| } else { |
| // T1 = -1 |
| vpcmpeqq(xtmp1, xtmp1, xtmp1, vlen_enc); |
| // T1 = -1 << 63 |
| vpsllq(xtmp1, xtmp1, 63, vlen_enc); |
| // Convert SRC2 to signed value i.e. T2 = T1 + SRC2 |
| vpaddq(xtmp2, xtmp1, src2, vlen_enc); |
| // Convert SRC1 to signed value i.e. T1 = T1 + SRC1 |
| vpaddq(xtmp1, xtmp1, src1, vlen_enc); |
| // Mask = T2 > T1 |
| vpcmpgtq(xtmp1, xtmp2, xtmp1, vlen_enc); |
| if (opcode == Op_UMaxV) { |
| // Res = Mask ? Src2 : Src1 |
| vpblendvb(dst, src1, src2, xtmp1, vlen_enc); |
| } else { |
| // Res = Mask ? Src1 : Src2 |
| vpblendvb(dst, src2, src1, xtmp1, vlen_enc); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vpuminmax(int opcode, BasicType elem_bt, XMMRegister dst, |
| XMMRegister src1, XMMRegister src2, int vlen_enc) { |
| assert(opcode == Op_UMinV || opcode == Op_UMaxV, "sanity"); |
| if (opcode == Op_UMinV) { |
| switch(elem_bt) { |
| case T_BYTE: vpminub(dst, src1, src2, vlen_enc); break; |
| case T_SHORT: vpminuw(dst, src1, src2, vlen_enc); break; |
| case T_INT: vpminud(dst, src1, src2, vlen_enc); break; |
| case T_LONG: evpminuq(dst, k0, src1, src2, false, vlen_enc); break; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); break; |
| } |
| } else { |
| assert(opcode == Op_UMaxV, "required"); |
| switch(elem_bt) { |
| case T_BYTE: vpmaxub(dst, src1, src2, vlen_enc); break; |
| case T_SHORT: vpmaxuw(dst, src1, src2, vlen_enc); break; |
| case T_INT: vpmaxud(dst, src1, src2, vlen_enc); break; |
| case T_LONG: evpmaxuq(dst, k0, src1, src2, false, vlen_enc); break; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); break; |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vpminmax(int opcode, BasicType elem_bt, |
| XMMRegister dst, XMMRegister src1, XMMRegister src2, |
| int vlen_enc) { |
| assert(opcode == Op_MinV || opcode == Op_MaxV, "sanity"); |
| |
| if (opcode == Op_MinV) { |
| if (elem_bt == T_BYTE) { |
| vpminsb(dst, src1, src2, vlen_enc); |
| } else if (elem_bt == T_SHORT) { |
| vpminsw(dst, src1, src2, vlen_enc); |
| } else if (elem_bt == T_INT) { |
| vpminsd(dst, src1, src2, vlen_enc); |
| } else { |
| assert(elem_bt == T_LONG, "required"); |
| if (UseAVX > 2 && (vlen_enc == Assembler::AVX_512bit || VM_Version::supports_avx512vl())) { |
| vpminsq(dst, src1, src2, vlen_enc); |
| } else { |
| assert_different_registers(dst, src1, src2); |
| vpcmpgtq(dst, src1, src2, vlen_enc); |
| vblendvpd(dst, src1, src2, dst, vlen_enc); |
| } |
| } |
| } else { // opcode == Op_MaxV |
| if (elem_bt == T_BYTE) { |
| vpmaxsb(dst, src1, src2, vlen_enc); |
| } else if (elem_bt == T_SHORT) { |
| vpmaxsw(dst, src1, src2, vlen_enc); |
| } else if (elem_bt == T_INT) { |
| vpmaxsd(dst, src1, src2, vlen_enc); |
| } else { |
| assert(elem_bt == T_LONG, "required"); |
| if (UseAVX > 2 && (vlen_enc == Assembler::AVX_512bit || VM_Version::supports_avx512vl())) { |
| vpmaxsq(dst, src1, src2, vlen_enc); |
| } else { |
| assert_different_registers(dst, src1, src2); |
| vpcmpgtq(dst, src1, src2, vlen_enc); |
| vblendvpd(dst, src2, src1, dst, vlen_enc); |
| } |
| } |
| } |
| } |
| |
| // Float/Double min max |
| |
| void C2_MacroAssembler::vminmax_fp(int opcode, BasicType elem_bt, |
| XMMRegister dst, XMMRegister a, XMMRegister b, |
| XMMRegister tmp, XMMRegister atmp, XMMRegister btmp, |
| int vlen_enc) { |
| assert(UseAVX > 0, "required"); |
| assert(opcode == Op_MinV || opcode == Op_MinReductionV || |
| opcode == Op_MaxV || opcode == Op_MaxReductionV, "sanity"); |
| assert(elem_bt == T_FLOAT || elem_bt == T_DOUBLE, "sanity"); |
| assert_different_registers(a, tmp, atmp, btmp); |
| assert_different_registers(b, tmp, atmp, btmp); |
| |
| bool is_min = (opcode == Op_MinV || opcode == Op_MinReductionV); |
| bool is_double_word = is_double_word_type(elem_bt); |
| |
| /* Note on 'non-obvious' assembly sequence: |
| * |
| * While there are vminps/vmaxps instructions, there are two important differences between hardware |
| * and Java on how they handle floats: |
| * a. -0.0 and +0.0 are considered equal (vminps/vmaxps will return second parameter when inputs are equal) |
| * b. NaN is not necesarily propagated (vminps/vmaxps will return second parameter when either input is NaN) |
| * |
| * It is still more efficient to use vminps/vmaxps, but with some pre/post-processing: |
| * a. -0.0/+0.0: Bias negative (positive) numbers to second parameter before vminps (vmaxps) |
| * (only useful when signs differ, noop otherwise) |
| * b. NaN: Check if it was the first parameter that had the NaN (with vcmp[UNORD_Q]) |
| |
| * Following pseudo code describes the algorithm for max[FD] (Min algorithm is on similar lines): |
| * btmp = (b < +0.0) ? a : b |
| * atmp = (b < +0.0) ? b : a |
| * Tmp = Max_Float(atmp , btmp) |
| * Res = (atmp == NaN) ? atmp : Tmp |
| */ |
| |
| void (MacroAssembler::*vblend)(XMMRegister, XMMRegister, XMMRegister, XMMRegister, int, bool, XMMRegister); |
| void (MacroAssembler::*vmaxmin)(XMMRegister, XMMRegister, XMMRegister, int); |
| void (MacroAssembler::*vcmp)(XMMRegister, XMMRegister, XMMRegister, int, int); |
| XMMRegister mask; |
| |
| if (!is_double_word && is_min) { |
| mask = a; |
| vblend = &MacroAssembler::vblendvps; |
| vmaxmin = &MacroAssembler::vminps; |
| vcmp = &MacroAssembler::vcmpps; |
| } else if (!is_double_word && !is_min) { |
| mask = b; |
| vblend = &MacroAssembler::vblendvps; |
| vmaxmin = &MacroAssembler::vmaxps; |
| vcmp = &MacroAssembler::vcmpps; |
| } else if (is_double_word && is_min) { |
| mask = a; |
| vblend = &MacroAssembler::vblendvpd; |
| vmaxmin = &MacroAssembler::vminpd; |
| vcmp = &MacroAssembler::vcmppd; |
| } else { |
| assert(is_double_word && !is_min, "sanity"); |
| mask = b; |
| vblend = &MacroAssembler::vblendvpd; |
| vmaxmin = &MacroAssembler::vmaxpd; |
| vcmp = &MacroAssembler::vcmppd; |
| } |
| |
| // Make sure EnableX86ECoreOpts isn't disabled on register overlaps |
| XMMRegister maxmin, scratch; |
| if (dst == btmp) { |
| maxmin = btmp; |
| scratch = tmp; |
| } else { |
| maxmin = tmp; |
| scratch = btmp; |
| } |
| |
| bool precompute_mask = EnableX86ECoreOpts && UseAVX>1; |
| if (precompute_mask && !is_double_word) { |
| vpsrad(tmp, mask, 32, vlen_enc); |
| mask = tmp; |
| } else if (precompute_mask && is_double_word) { |
| vpxor(tmp, tmp, tmp, vlen_enc); |
| vpcmpgtq(tmp, tmp, mask, vlen_enc); |
| mask = tmp; |
| } |
| |
| (this->*vblend)(atmp, a, b, mask, vlen_enc, !precompute_mask, btmp); |
| (this->*vblend)(btmp, b, a, mask, vlen_enc, !precompute_mask, tmp); |
| (this->*vmaxmin)(maxmin, atmp, btmp, vlen_enc); |
| (this->*vcmp)(scratch, atmp, atmp, Assembler::UNORD_Q, vlen_enc); |
| (this->*vblend)(dst, maxmin, atmp, scratch, vlen_enc, false, scratch); |
| } |
| |
| void C2_MacroAssembler::evminmax_fp(int opcode, BasicType elem_bt, |
| XMMRegister dst, XMMRegister a, XMMRegister b, |
| KRegister ktmp, XMMRegister atmp, XMMRegister btmp, |
| int vlen_enc) { |
| assert(UseAVX > 2, "required"); |
| assert(opcode == Op_MinV || opcode == Op_MinReductionV || |
| opcode == Op_MaxV || opcode == Op_MaxReductionV, "sanity"); |
| assert(elem_bt == T_FLOAT || elem_bt == T_DOUBLE, "sanity"); |
| assert_different_registers(dst, a, atmp, btmp); |
| assert_different_registers(dst, b, atmp, btmp); |
| |
| bool is_min = (opcode == Op_MinV || opcode == Op_MinReductionV); |
| bool is_double_word = is_double_word_type(elem_bt); |
| bool merge = true; |
| |
| if (!is_double_word && is_min) { |
| evpmovd2m(ktmp, a, vlen_enc); |
| evblendmps(atmp, ktmp, a, b, merge, vlen_enc); |
| evblendmps(btmp, ktmp, b, a, merge, vlen_enc); |
| vminps(dst, atmp, btmp, vlen_enc); |
| evcmpps(ktmp, k0, atmp, atmp, Assembler::UNORD_Q, vlen_enc); |
| evmovdqul(dst, ktmp, atmp, merge, vlen_enc); |
| } else if (!is_double_word && !is_min) { |
| evpmovd2m(ktmp, b, vlen_enc); |
| evblendmps(atmp, ktmp, a, b, merge, vlen_enc); |
| evblendmps(btmp, ktmp, b, a, merge, vlen_enc); |
| vmaxps(dst, atmp, btmp, vlen_enc); |
| evcmpps(ktmp, k0, atmp, atmp, Assembler::UNORD_Q, vlen_enc); |
| evmovdqul(dst, ktmp, atmp, merge, vlen_enc); |
| } else if (is_double_word && is_min) { |
| evpmovq2m(ktmp, a, vlen_enc); |
| evblendmpd(atmp, ktmp, a, b, merge, vlen_enc); |
| evblendmpd(btmp, ktmp, b, a, merge, vlen_enc); |
| vminpd(dst, atmp, btmp, vlen_enc); |
| evcmppd(ktmp, k0, atmp, atmp, Assembler::UNORD_Q, vlen_enc); |
| evmovdquq(dst, ktmp, atmp, merge, vlen_enc); |
| } else { |
| assert(is_double_word && !is_min, "sanity"); |
| evpmovq2m(ktmp, b, vlen_enc); |
| evblendmpd(atmp, ktmp, a, b, merge, vlen_enc); |
| evblendmpd(btmp, ktmp, b, a, merge, vlen_enc); |
| vmaxpd(dst, atmp, btmp, vlen_enc); |
| evcmppd(ktmp, k0, atmp, atmp, Assembler::UNORD_Q, vlen_enc); |
| evmovdquq(dst, ktmp, atmp, merge, vlen_enc); |
| } |
| } |
| |
| // Float/Double signum |
| void C2_MacroAssembler::signum_fp(int opcode, XMMRegister dst, XMMRegister zero, XMMRegister one) { |
| assert(opcode == Op_SignumF || opcode == Op_SignumD, "sanity"); |
| |
| Label DONE_LABEL; |
| |
| if (opcode == Op_SignumF) { |
| ucomiss(dst, zero); |
| jcc(Assembler::equal, DONE_LABEL); // handle special case +0.0/-0.0, if argument is +0.0/-0.0, return argument |
| jcc(Assembler::parity, DONE_LABEL); // handle special case NaN, if argument NaN, return NaN |
| movflt(dst, one); |
| jcc(Assembler::above, DONE_LABEL); |
| xorps(dst, ExternalAddress(StubRoutines::x86::vector_float_sign_flip()), noreg); |
| } else if (opcode == Op_SignumD) { |
| ucomisd(dst, zero); |
| jcc(Assembler::equal, DONE_LABEL); // handle special case +0.0/-0.0, if argument is +0.0/-0.0, return argument |
| jcc(Assembler::parity, DONE_LABEL); // handle special case NaN, if argument NaN, return NaN |
| movdbl(dst, one); |
| jcc(Assembler::above, DONE_LABEL); |
| xorpd(dst, ExternalAddress(StubRoutines::x86::vector_double_sign_flip()), noreg); |
| } |
| |
| bind(DONE_LABEL); |
| } |
| |
| void C2_MacroAssembler::vextendbw(bool sign, XMMRegister dst, XMMRegister src) { |
| if (sign) { |
| pmovsxbw(dst, src); |
| } else { |
| pmovzxbw(dst, src); |
| } |
| } |
| |
| void C2_MacroAssembler::vextendbw(bool sign, XMMRegister dst, XMMRegister src, int vector_len) { |
| if (sign) { |
| vpmovsxbw(dst, src, vector_len); |
| } else { |
| vpmovzxbw(dst, src, vector_len); |
| } |
| } |
| |
| void C2_MacroAssembler::vextendbd(bool sign, XMMRegister dst, XMMRegister src, int vector_len) { |
| if (sign) { |
| vpmovsxbd(dst, src, vector_len); |
| } else { |
| vpmovzxbd(dst, src, vector_len); |
| } |
| } |
| |
| void C2_MacroAssembler::vextendwd(bool sign, XMMRegister dst, XMMRegister src, int vector_len) { |
| if (sign) { |
| vpmovsxwd(dst, src, vector_len); |
| } else { |
| vpmovzxwd(dst, src, vector_len); |
| } |
| } |
| |
| void C2_MacroAssembler::vprotate_imm(int opcode, BasicType etype, XMMRegister dst, XMMRegister src, |
| int shift, int vector_len) { |
| if (opcode == Op_RotateLeftV) { |
| if (etype == T_INT) { |
| evprold(dst, src, shift, vector_len); |
| } else { |
| assert(etype == T_LONG, "expected type T_LONG"); |
| evprolq(dst, src, shift, vector_len); |
| } |
| } else { |
| assert(opcode == Op_RotateRightV, "opcode should be Op_RotateRightV"); |
| if (etype == T_INT) { |
| evprord(dst, src, shift, vector_len); |
| } else { |
| assert(etype == T_LONG, "expected type T_LONG"); |
| evprorq(dst, src, shift, vector_len); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vprotate_var(int opcode, BasicType etype, XMMRegister dst, XMMRegister src, |
| XMMRegister shift, int vector_len) { |
| if (opcode == Op_RotateLeftV) { |
| if (etype == T_INT) { |
| evprolvd(dst, src, shift, vector_len); |
| } else { |
| assert(etype == T_LONG, "expected type T_LONG"); |
| evprolvq(dst, src, shift, vector_len); |
| } |
| } else { |
| assert(opcode == Op_RotateRightV, "opcode should be Op_RotateRightV"); |
| if (etype == T_INT) { |
| evprorvd(dst, src, shift, vector_len); |
| } else { |
| assert(etype == T_LONG, "expected type T_LONG"); |
| evprorvq(dst, src, shift, vector_len); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftd_imm(int opcode, XMMRegister dst, int shift) { |
| if (opcode == Op_RShiftVI) { |
| psrad(dst, shift); |
| } else if (opcode == Op_LShiftVI) { |
| pslld(dst, shift); |
| } else { |
| assert((opcode == Op_URShiftVI),"opcode should be Op_URShiftVI"); |
| psrld(dst, shift); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftd(int opcode, XMMRegister dst, XMMRegister shift) { |
| switch (opcode) { |
| case Op_RShiftVI: psrad(dst, shift); break; |
| case Op_LShiftVI: pslld(dst, shift); break; |
| case Op_URShiftVI: psrld(dst, shift); break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftd_imm(int opcode, XMMRegister dst, XMMRegister nds, int shift, int vector_len) { |
| if (opcode == Op_RShiftVI) { |
| vpsrad(dst, nds, shift, vector_len); |
| } else if (opcode == Op_LShiftVI) { |
| vpslld(dst, nds, shift, vector_len); |
| } else { |
| assert((opcode == Op_URShiftVI),"opcode should be Op_URShiftVI"); |
| vpsrld(dst, nds, shift, vector_len); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftd(int opcode, XMMRegister dst, XMMRegister src, XMMRegister shift, int vlen_enc) { |
| switch (opcode) { |
| case Op_RShiftVI: vpsrad(dst, src, shift, vlen_enc); break; |
| case Op_LShiftVI: vpslld(dst, src, shift, vlen_enc); break; |
| case Op_URShiftVI: vpsrld(dst, src, shift, vlen_enc); break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftw(int opcode, XMMRegister dst, XMMRegister shift) { |
| switch (opcode) { |
| case Op_RShiftVB: // fall-through |
| case Op_RShiftVS: psraw(dst, shift); break; |
| |
| case Op_LShiftVB: // fall-through |
| case Op_LShiftVS: psllw(dst, shift); break; |
| |
| case Op_URShiftVS: // fall-through |
| case Op_URShiftVB: psrlw(dst, shift); break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftw(int opcode, XMMRegister dst, XMMRegister src, XMMRegister shift, int vlen_enc) { |
| switch (opcode) { |
| case Op_RShiftVB: // fall-through |
| case Op_RShiftVS: vpsraw(dst, src, shift, vlen_enc); break; |
| |
| case Op_LShiftVB: // fall-through |
| case Op_LShiftVS: vpsllw(dst, src, shift, vlen_enc); break; |
| |
| case Op_URShiftVS: // fall-through |
| case Op_URShiftVB: vpsrlw(dst, src, shift, vlen_enc); break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftq(int opcode, XMMRegister dst, XMMRegister shift) { |
| switch (opcode) { |
| case Op_RShiftVL: psrlq(dst, shift); break; // using srl to implement sra on pre-avs512 systems |
| case Op_LShiftVL: psllq(dst, shift); break; |
| case Op_URShiftVL: psrlq(dst, shift); break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftq_imm(int opcode, XMMRegister dst, int shift) { |
| if (opcode == Op_RShiftVL) { |
| psrlq(dst, shift); // using srl to implement sra on pre-avs512 systems |
| } else if (opcode == Op_LShiftVL) { |
| psllq(dst, shift); |
| } else { |
| assert((opcode == Op_URShiftVL),"opcode should be Op_URShiftVL"); |
| psrlq(dst, shift); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftq(int opcode, XMMRegister dst, XMMRegister src, XMMRegister shift, int vlen_enc) { |
| switch (opcode) { |
| case Op_RShiftVL: evpsraq(dst, src, shift, vlen_enc); break; |
| case Op_LShiftVL: vpsllq(dst, src, shift, vlen_enc); break; |
| case Op_URShiftVL: vpsrlq(dst, src, shift, vlen_enc); break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::vshiftq_imm(int opcode, XMMRegister dst, XMMRegister nds, int shift, int vector_len) { |
| if (opcode == Op_RShiftVL) { |
| evpsraq(dst, nds, shift, vector_len); |
| } else if (opcode == Op_LShiftVL) { |
| vpsllq(dst, nds, shift, vector_len); |
| } else { |
| assert((opcode == Op_URShiftVL),"opcode should be Op_URShiftVL"); |
| vpsrlq(dst, nds, shift, vector_len); |
| } |
| } |
| |
| void C2_MacroAssembler::varshiftd(int opcode, XMMRegister dst, XMMRegister src, XMMRegister shift, int vlen_enc) { |
| switch (opcode) { |
| case Op_RShiftVB: // fall-through |
| case Op_RShiftVS: // fall-through |
| case Op_RShiftVI: vpsravd(dst, src, shift, vlen_enc); break; |
| |
| case Op_LShiftVB: // fall-through |
| case Op_LShiftVS: // fall-through |
| case Op_LShiftVI: vpsllvd(dst, src, shift, vlen_enc); break; |
| |
| case Op_URShiftVB: // fall-through |
| case Op_URShiftVS: // fall-through |
| case Op_URShiftVI: vpsrlvd(dst, src, shift, vlen_enc); break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::varshiftw(int opcode, XMMRegister dst, XMMRegister src, XMMRegister shift, int vlen_enc) { |
| switch (opcode) { |
| case Op_RShiftVB: // fall-through |
| case Op_RShiftVS: evpsravw(dst, src, shift, vlen_enc); break; |
| |
| case Op_LShiftVB: // fall-through |
| case Op_LShiftVS: evpsllvw(dst, src, shift, vlen_enc); break; |
| |
| case Op_URShiftVB: // fall-through |
| case Op_URShiftVS: evpsrlvw(dst, src, shift, vlen_enc); break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::varshiftq(int opcode, XMMRegister dst, XMMRegister src, XMMRegister shift, int vlen_enc, XMMRegister tmp) { |
| assert(UseAVX >= 2, "required"); |
| switch (opcode) { |
| case Op_RShiftVL: { |
| if (UseAVX > 2) { |
| assert(tmp == xnoreg, "not used"); |
| if (!VM_Version::supports_avx512vl()) { |
| vlen_enc = Assembler::AVX_512bit; |
| } |
| evpsravq(dst, src, shift, vlen_enc); |
| } else { |
| vmovdqu(tmp, ExternalAddress(StubRoutines::x86::vector_long_sign_mask())); |
| vpsrlvq(dst, src, shift, vlen_enc); |
| vpsrlvq(tmp, tmp, shift, vlen_enc); |
| vpxor(dst, dst, tmp, vlen_enc); |
| vpsubq(dst, dst, tmp, vlen_enc); |
| } |
| break; |
| } |
| case Op_LShiftVL: { |
| assert(tmp == xnoreg, "not used"); |
| vpsllvq(dst, src, shift, vlen_enc); |
| break; |
| } |
| case Op_URShiftVL: { |
| assert(tmp == xnoreg, "not used"); |
| vpsrlvq(dst, src, shift, vlen_enc); |
| break; |
| } |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| // Variable shift src by shift using vtmp and scratch as TEMPs giving word result in dst |
| void C2_MacroAssembler::varshiftbw(int opcode, XMMRegister dst, XMMRegister src, XMMRegister shift, int vector_len, XMMRegister vtmp) { |
| assert(opcode == Op_LShiftVB || |
| opcode == Op_RShiftVB || |
| opcode == Op_URShiftVB, "%s", NodeClassNames[opcode]); |
| bool sign = (opcode != Op_URShiftVB); |
| assert(vector_len == 0, "required"); |
| vextendbd(sign, dst, src, 1); |
| vpmovzxbd(vtmp, shift, 1); |
| varshiftd(opcode, dst, dst, vtmp, 1); |
| vpand(dst, dst, ExternalAddress(StubRoutines::x86::vector_int_to_byte_mask()), 1, noreg); |
| vextracti128_high(vtmp, dst); |
| vpackusdw(dst, dst, vtmp, 0); |
| } |
| |
| // Variable shift src by shift using vtmp and scratch as TEMPs giving byte result in dst |
| void C2_MacroAssembler::evarshiftb(int opcode, XMMRegister dst, XMMRegister src, XMMRegister shift, int vector_len, XMMRegister vtmp) { |
| assert(opcode == Op_LShiftVB || |
| opcode == Op_RShiftVB || |
| opcode == Op_URShiftVB, "%s", NodeClassNames[opcode]); |
| bool sign = (opcode != Op_URShiftVB); |
| int ext_vector_len = vector_len + 1; |
| vextendbw(sign, dst, src, ext_vector_len); |
| vpmovzxbw(vtmp, shift, ext_vector_len); |
| varshiftw(opcode, dst, dst, vtmp, ext_vector_len); |
| vpand(dst, dst, ExternalAddress(StubRoutines::x86::vector_short_to_byte_mask()), ext_vector_len, noreg); |
| if (vector_len == 0) { |
| vextracti128_high(vtmp, dst); |
| vpackuswb(dst, dst, vtmp, vector_len); |
| } else { |
| vextracti64x4_high(vtmp, dst); |
| vpackuswb(dst, dst, vtmp, vector_len); |
| vpermq(dst, dst, 0xD8, vector_len); |
| } |
| } |
| |
| void C2_MacroAssembler::insert(BasicType typ, XMMRegister dst, Register val, int idx) { |
| switch(typ) { |
| case T_BYTE: |
| pinsrb(dst, val, idx); |
| break; |
| case T_SHORT: |
| pinsrw(dst, val, idx); |
| break; |
| case T_INT: |
| pinsrd(dst, val, idx); |
| break; |
| case T_LONG: |
| pinsrq(dst, val, idx); |
| break; |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vinsert(BasicType typ, XMMRegister dst, XMMRegister src, Register val, int idx) { |
| switch(typ) { |
| case T_BYTE: |
| vpinsrb(dst, src, val, idx); |
| break; |
| case T_SHORT: |
| vpinsrw(dst, src, val, idx); |
| break; |
| case T_INT: |
| vpinsrd(dst, src, val, idx); |
| break; |
| case T_LONG: |
| vpinsrq(dst, src, val, idx); |
| break; |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vgather8b_masked_offset(BasicType elem_bt, |
| XMMRegister dst, Register base, |
| Register idx_base, |
| Register offset, Register mask, |
| Register mask_idx, Register rtmp, |
| int vlen_enc) { |
| vpxor(dst, dst, dst, vlen_enc); |
| if (elem_bt == T_SHORT) { |
| for (int i = 0; i < 4; i++) { |
| // dst[i] = mask[i] ? src[offset + idx_base[i]] : 0 |
| Label skip_load; |
| btq(mask, mask_idx); |
| jccb(Assembler::carryClear, skip_load); |
| movl(rtmp, Address(idx_base, i * 4)); |
| if (offset != noreg) { |
| addl(rtmp, offset); |
| } |
| pinsrw(dst, Address(base, rtmp, Address::times_2), i); |
| bind(skip_load); |
| incq(mask_idx); |
| } |
| } else { |
| assert(elem_bt == T_BYTE, ""); |
| for (int i = 0; i < 8; i++) { |
| // dst[i] = mask[i] ? src[offset + idx_base[i]] : 0 |
| Label skip_load; |
| btq(mask, mask_idx); |
| jccb(Assembler::carryClear, skip_load); |
| movl(rtmp, Address(idx_base, i * 4)); |
| if (offset != noreg) { |
| addl(rtmp, offset); |
| } |
| pinsrb(dst, Address(base, rtmp), i); |
| bind(skip_load); |
| incq(mask_idx); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vgather8b_offset(BasicType elem_bt, XMMRegister dst, |
| Register base, Register idx_base, |
| Register offset, Register rtmp, |
| int vlen_enc) { |
| vpxor(dst, dst, dst, vlen_enc); |
| if (elem_bt == T_SHORT) { |
| for (int i = 0; i < 4; i++) { |
| // dst[i] = src[offset + idx_base[i]] |
| movl(rtmp, Address(idx_base, i * 4)); |
| if (offset != noreg) { |
| addl(rtmp, offset); |
| } |
| pinsrw(dst, Address(base, rtmp, Address::times_2), i); |
| } |
| } else { |
| assert(elem_bt == T_BYTE, ""); |
| for (int i = 0; i < 8; i++) { |
| // dst[i] = src[offset + idx_base[i]] |
| movl(rtmp, Address(idx_base, i * 4)); |
| if (offset != noreg) { |
| addl(rtmp, offset); |
| } |
| pinsrb(dst, Address(base, rtmp), i); |
| } |
| } |
| } |
| |
| /* |
| * Gather using hybrid algorithm, first partially unroll scalar loop |
| * to accumulate values from gather indices into a quad-word(64bit) slice. |
| * A slice may hold 8 bytes or 4 short values. This is followed by a vector |
| * permutation to place the slice into appropriate vector lane |
| * locations in destination vector. Following pseudo code describes the |
| * algorithm in detail: |
| * |
| * DST_VEC = ZERO_VEC |
| * PERM_INDEX = {0, 1, 2, 3, 4, 5, 6, 7, 8..} |
| * TWO_VEC = {2, 2, 2, 2, 2, 2, 2, 2, 2..} |
| * FOREACH_ITER: |
| * TMP_VEC_64 = PICK_SUB_WORDS_FROM_GATHER_INDICES |
| * TEMP_PERM_VEC = PERMUTE TMP_VEC_64 PERM_INDEX |
| * DST_VEC = DST_VEC OR TEMP_PERM_VEC |
| * PERM_INDEX = PERM_INDEX - TWO_VEC |
| * |
| * With each iteration, doubleword permute indices (0,1) corresponding |
| * to gathered quadword gets right shifted by two lane positions. |
| * |
| */ |
| void C2_MacroAssembler::vgather_subword(BasicType elem_ty, XMMRegister dst, |
| Register base, Register idx_base, |
| Register offset, Register mask, |
| XMMRegister xtmp1, XMMRegister xtmp2, |
| XMMRegister temp_dst, Register rtmp, |
| Register mask_idx, Register length, |
| int vector_len, int vlen_enc) { |
| Label GATHER8_LOOP; |
| assert(is_subword_type(elem_ty), ""); |
| movl(length, vector_len); |
| vpxor(xtmp1, xtmp1, xtmp1, vlen_enc); // xtmp1 = {0, ...} |
| vpxor(dst, dst, dst, vlen_enc); // dst = {0, ...} |
| vallones(xtmp2, vlen_enc); |
| vpsubd(xtmp2, xtmp1, xtmp2, vlen_enc); |
| vpslld(xtmp2, xtmp2, 1, vlen_enc); // xtmp2 = {2, 2, ...} |
| load_iota_indices(xtmp1, vector_len * type2aelembytes(elem_ty), T_INT); // xtmp1 = {0, 1, 2, ...} |
| |
| bind(GATHER8_LOOP); |
| // TMP_VEC_64(temp_dst) = PICK_SUB_WORDS_FROM_GATHER_INDICES |
| if (mask == noreg) { |
| vgather8b_offset(elem_ty, temp_dst, base, idx_base, offset, rtmp, vlen_enc); |
| } else { |
| vgather8b_masked_offset(elem_ty, temp_dst, base, idx_base, offset, mask, mask_idx, rtmp, vlen_enc); |
| } |
| // TEMP_PERM_VEC(temp_dst) = PERMUTE TMP_VEC_64(temp_dst) PERM_INDEX(xtmp1) |
| vpermd(temp_dst, xtmp1, temp_dst, vlen_enc == Assembler::AVX_512bit ? vlen_enc : Assembler::AVX_256bit); |
| // PERM_INDEX(xtmp1) = PERM_INDEX(xtmp1) - TWO_VEC(xtmp2) |
| vpsubd(xtmp1, xtmp1, xtmp2, vlen_enc); |
| // DST_VEC = DST_VEC OR TEMP_PERM_VEC |
| vpor(dst, dst, temp_dst, vlen_enc); |
| addptr(idx_base, 32 >> (type2aelembytes(elem_ty) - 1)); |
| subl(length, 8 >> (type2aelembytes(elem_ty) - 1)); |
| jcc(Assembler::notEqual, GATHER8_LOOP); |
| } |
| |
| void C2_MacroAssembler::vgather(BasicType typ, XMMRegister dst, Register base, XMMRegister idx, XMMRegister mask, int vector_len) { |
| switch(typ) { |
| case T_INT: |
| vpgatherdd(dst, Address(base, idx, Address::times_4), mask, vector_len); |
| break; |
| case T_FLOAT: |
| vgatherdps(dst, Address(base, idx, Address::times_4), mask, vector_len); |
| break; |
| case T_LONG: |
| vpgatherdq(dst, Address(base, idx, Address::times_8), mask, vector_len); |
| break; |
| case T_DOUBLE: |
| vgatherdpd(dst, Address(base, idx, Address::times_8), mask, vector_len); |
| break; |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evgather(BasicType typ, XMMRegister dst, KRegister mask, Register base, XMMRegister idx, int vector_len) { |
| switch(typ) { |
| case T_INT: |
| evpgatherdd(dst, mask, Address(base, idx, Address::times_4), vector_len); |
| break; |
| case T_FLOAT: |
| evgatherdps(dst, mask, Address(base, idx, Address::times_4), vector_len); |
| break; |
| case T_LONG: |
| evpgatherdq(dst, mask, Address(base, idx, Address::times_8), vector_len); |
| break; |
| case T_DOUBLE: |
| evgatherdpd(dst, mask, Address(base, idx, Address::times_8), vector_len); |
| break; |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evscatter(BasicType typ, Register base, XMMRegister idx, KRegister mask, XMMRegister src, int vector_len) { |
| switch(typ) { |
| case T_INT: |
| evpscatterdd(Address(base, idx, Address::times_4), mask, src, vector_len); |
| break; |
| case T_FLOAT: |
| evscatterdps(Address(base, idx, Address::times_4), mask, src, vector_len); |
| break; |
| case T_LONG: |
| evpscatterdq(Address(base, idx, Address::times_8), mask, src, vector_len); |
| break; |
| case T_DOUBLE: |
| evscatterdpd(Address(base, idx, Address::times_8), mask, src, vector_len); |
| break; |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::load_vector_mask(XMMRegister dst, XMMRegister src, int vlen_in_bytes, BasicType elem_bt, bool is_legacy) { |
| if (vlen_in_bytes <= 16) { |
| pxor (dst, dst); |
| psubb(dst, src); |
| switch (elem_bt) { |
| case T_BYTE: /* nothing to do */ break; |
| case T_SHORT: pmovsxbw(dst, dst); break; |
| case T_INT: pmovsxbd(dst, dst); break; |
| case T_FLOAT: pmovsxbd(dst, dst); break; |
| case T_LONG: pmovsxbq(dst, dst); break; |
| case T_DOUBLE: pmovsxbq(dst, dst); break; |
| |
| default: assert(false, "%s", type2name(elem_bt)); |
| } |
| } else { |
| assert(!is_legacy || !is_subword_type(elem_bt) || vlen_in_bytes < 64, ""); |
| int vlen_enc = vector_length_encoding(vlen_in_bytes); |
| |
| vpxor (dst, dst, dst, vlen_enc); |
| vpsubb(dst, dst, src, is_legacy ? AVX_256bit : vlen_enc); |
| |
| switch (elem_bt) { |
| case T_BYTE: /* nothing to do */ break; |
| case T_SHORT: vpmovsxbw(dst, dst, vlen_enc); break; |
| case T_INT: vpmovsxbd(dst, dst, vlen_enc); break; |
| case T_FLOAT: vpmovsxbd(dst, dst, vlen_enc); break; |
| case T_LONG: vpmovsxbq(dst, dst, vlen_enc); break; |
| case T_DOUBLE: vpmovsxbq(dst, dst, vlen_enc); break; |
| |
| default: assert(false, "%s", type2name(elem_bt)); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::load_vector_mask(KRegister dst, XMMRegister src, XMMRegister xtmp, bool novlbwdq, int vlen_enc) { |
| if (novlbwdq) { |
| vpmovsxbd(xtmp, src, vlen_enc); |
| evpcmpd(dst, k0, xtmp, ExternalAddress(StubRoutines::x86::vector_int_mask_cmp_bits()), |
| Assembler::eq, true, vlen_enc, noreg); |
| } else { |
| vpxor(xtmp, xtmp, xtmp, vlen_enc); |
| vpsubb(xtmp, xtmp, src, vlen_enc); |
| evpmovb2m(dst, xtmp, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::load_vector(BasicType bt, XMMRegister dst, Address src, int vlen_in_bytes) { |
| if (is_integral_type(bt)) { |
| switch (vlen_in_bytes) { |
| case 4: movdl(dst, src); break; |
| case 8: movq(dst, src); break; |
| case 16: movdqu(dst, src); break; |
| case 32: vmovdqu(dst, src); break; |
| case 64: evmovdqul(dst, src, Assembler::AVX_512bit); break; |
| default: ShouldNotReachHere(); |
| } |
| } else { |
| switch (vlen_in_bytes) { |
| case 4: movflt(dst, src); break; |
| case 8: movdbl(dst, src); break; |
| case 16: movups(dst, src); break; |
| case 32: vmovups(dst, src, Assembler::AVX_256bit); break; |
| case 64: vmovups(dst, src, Assembler::AVX_512bit); break; |
| default: ShouldNotReachHere(); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::load_vector(BasicType bt, XMMRegister dst, AddressLiteral src, int vlen_in_bytes, Register rscratch) { |
| assert(rscratch != noreg || always_reachable(src), "missing"); |
| |
| if (reachable(src)) { |
| load_vector(bt, dst, as_Address(src), vlen_in_bytes); |
| } else { |
| lea(rscratch, src); |
| load_vector(bt, dst, Address(rscratch, 0), vlen_in_bytes); |
| } |
| } |
| |
| void C2_MacroAssembler::load_constant_vector(BasicType bt, XMMRegister dst, InternalAddress src, int vlen) { |
| int vlen_enc = vector_length_encoding(vlen); |
| if (VM_Version::supports_avx()) { |
| if (bt == T_LONG) { |
| if (VM_Version::supports_avx2()) { |
| vpbroadcastq(dst, src, vlen_enc); |
| } else { |
| vmovddup(dst, src, vlen_enc); |
| } |
| } else if (bt == T_DOUBLE) { |
| if (vlen_enc != Assembler::AVX_128bit) { |
| vbroadcastsd(dst, src, vlen_enc, noreg); |
| } else { |
| vmovddup(dst, src, vlen_enc); |
| } |
| } else { |
| if (VM_Version::supports_avx2() && is_integral_type(bt)) { |
| vpbroadcastd(dst, src, vlen_enc); |
| } else { |
| vbroadcastss(dst, src, vlen_enc); |
| } |
| } |
| } else if (VM_Version::supports_sse3()) { |
| movddup(dst, src); |
| } else { |
| load_vector(bt, dst, src, vlen); |
| } |
| } |
| |
| void C2_MacroAssembler::load_iota_indices(XMMRegister dst, int vlen_in_bytes, BasicType bt) { |
| // The iota indices are ordered by type B/S/I/L/F/D, and the offset between two types is 64. |
| int offset = exact_log2(type2aelembytes(bt)) << 6; |
| if (is_floating_point_type(bt)) { |
| offset += 128; |
| } |
| ExternalAddress addr(StubRoutines::x86::vector_iota_indices() + offset); |
| load_vector(T_BYTE, dst, addr, vlen_in_bytes); |
| } |
| |
| // Reductions for vectors of bytes, shorts, ints, longs, floats, and doubles. |
| |
| void C2_MacroAssembler::reduce_operation_128(BasicType typ, int opcode, XMMRegister dst, XMMRegister src) { |
| int vector_len = Assembler::AVX_128bit; |
| |
| switch (opcode) { |
| case Op_AndReductionV: pand(dst, src); break; |
| case Op_OrReductionV: por (dst, src); break; |
| case Op_XorReductionV: pxor(dst, src); break; |
| case Op_MinReductionV: |
| switch (typ) { |
| case T_BYTE: pminsb(dst, src); break; |
| case T_SHORT: pminsw(dst, src); break; |
| case T_INT: pminsd(dst, src); break; |
| case T_LONG: assert(UseAVX > 2, "required"); |
| vpminsq(dst, dst, src, Assembler::AVX_128bit); break; |
| default: assert(false, "wrong type"); |
| } |
| break; |
| case Op_MaxReductionV: |
| switch (typ) { |
| case T_BYTE: pmaxsb(dst, src); break; |
| case T_SHORT: pmaxsw(dst, src); break; |
| case T_INT: pmaxsd(dst, src); break; |
| case T_LONG: assert(UseAVX > 2, "required"); |
| vpmaxsq(dst, dst, src, Assembler::AVX_128bit); break; |
| default: assert(false, "wrong type"); |
| } |
| break; |
| case Op_AddReductionVF: addss(dst, src); break; |
| case Op_AddReductionVD: addsd(dst, src); break; |
| case Op_AddReductionVI: |
| switch (typ) { |
| case T_BYTE: paddb(dst, src); break; |
| case T_SHORT: paddw(dst, src); break; |
| case T_INT: paddd(dst, src); break; |
| default: assert(false, "wrong type"); |
| } |
| break; |
| case Op_AddReductionVL: paddq(dst, src); break; |
| case Op_MulReductionVF: mulss(dst, src); break; |
| case Op_MulReductionVD: mulsd(dst, src); break; |
| case Op_MulReductionVI: |
| switch (typ) { |
| case T_SHORT: pmullw(dst, src); break; |
| case T_INT: pmulld(dst, src); break; |
| default: assert(false, "wrong type"); |
| } |
| break; |
| case Op_MulReductionVL: assert(UseAVX > 2, "required"); |
| evpmullq(dst, dst, src, vector_len); break; |
| default: assert(false, "wrong opcode"); |
| } |
| } |
| |
| void C2_MacroAssembler::unordered_reduce_operation_128(BasicType typ, int opcode, XMMRegister dst, XMMRegister src) { |
| switch (opcode) { |
| case Op_AddReductionVF: addps(dst, src); break; |
| case Op_AddReductionVD: addpd(dst, src); break; |
| case Op_MulReductionVF: mulps(dst, src); break; |
| case Op_MulReductionVD: mulpd(dst, src); break; |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::reduce_operation_256(BasicType typ, int opcode, XMMRegister dst, XMMRegister src1, XMMRegister src2) { |
| int vector_len = Assembler::AVX_256bit; |
| |
| switch (opcode) { |
| case Op_AndReductionV: vpand(dst, src1, src2, vector_len); break; |
| case Op_OrReductionV: vpor (dst, src1, src2, vector_len); break; |
| case Op_XorReductionV: vpxor(dst, src1, src2, vector_len); break; |
| case Op_MinReductionV: |
| switch (typ) { |
| case T_BYTE: vpminsb(dst, src1, src2, vector_len); break; |
| case T_SHORT: vpminsw(dst, src1, src2, vector_len); break; |
| case T_INT: vpminsd(dst, src1, src2, vector_len); break; |
| case T_LONG: assert(UseAVX > 2, "required"); |
| vpminsq(dst, src1, src2, vector_len); break; |
| default: assert(false, "wrong type"); |
| } |
| break; |
| case Op_MaxReductionV: |
| switch (typ) { |
| case T_BYTE: vpmaxsb(dst, src1, src2, vector_len); break; |
| case T_SHORT: vpmaxsw(dst, src1, src2, vector_len); break; |
| case T_INT: vpmaxsd(dst, src1, src2, vector_len); break; |
| case T_LONG: assert(UseAVX > 2, "required"); |
| vpmaxsq(dst, src1, src2, vector_len); break; |
| default: assert(false, "wrong type"); |
| } |
| break; |
| case Op_AddReductionVI: |
| switch (typ) { |
| case T_BYTE: vpaddb(dst, src1, src2, vector_len); break; |
| case T_SHORT: vpaddw(dst, src1, src2, vector_len); break; |
| case T_INT: vpaddd(dst, src1, src2, vector_len); break; |
| default: assert(false, "wrong type"); |
| } |
| break; |
| case Op_AddReductionVL: vpaddq(dst, src1, src2, vector_len); break; |
| case Op_MulReductionVI: |
| switch (typ) { |
| case T_SHORT: vpmullw(dst, src1, src2, vector_len); break; |
| case T_INT: vpmulld(dst, src1, src2, vector_len); break; |
| default: assert(false, "wrong type"); |
| } |
| break; |
| case Op_MulReductionVL: evpmullq(dst, src1, src2, vector_len); break; |
| default: assert(false, "wrong opcode"); |
| } |
| } |
| |
| void C2_MacroAssembler::unordered_reduce_operation_256(BasicType typ, int opcode, XMMRegister dst, XMMRegister src1, XMMRegister src2) { |
| int vector_len = Assembler::AVX_256bit; |
| |
| switch (opcode) { |
| case Op_AddReductionVF: vaddps(dst, src1, src2, vector_len); break; |
| case Op_AddReductionVD: vaddpd(dst, src1, src2, vector_len); break; |
| case Op_MulReductionVF: vmulps(dst, src1, src2, vector_len); break; |
| case Op_MulReductionVD: vmulpd(dst, src1, src2, vector_len); break; |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::reduce_fp(int opcode, int vlen, |
| XMMRegister dst, XMMRegister src, |
| XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (opcode) { |
| case Op_AddReductionVF: |
| case Op_MulReductionVF: |
| reduceF(opcode, vlen, dst, src, vtmp1, vtmp2); |
| break; |
| |
| case Op_AddReductionVD: |
| case Op_MulReductionVD: |
| reduceD(opcode, vlen, dst, src, vtmp1, vtmp2); |
| break; |
| |
| default: assert(false, "wrong opcode"); |
| } |
| } |
| |
| void C2_MacroAssembler::unordered_reduce_fp(int opcode, int vlen, |
| XMMRegister dst, XMMRegister src, |
| XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (opcode) { |
| case Op_AddReductionVF: |
| case Op_MulReductionVF: |
| unorderedReduceF(opcode, vlen, dst, src, vtmp1, vtmp2); |
| break; |
| |
| case Op_AddReductionVD: |
| case Op_MulReductionVD: |
| unorderedReduceD(opcode, vlen, dst, src, vtmp1, vtmp2); |
| break; |
| |
| default: assert(false, "%s", NodeClassNames[opcode]); |
| } |
| } |
| |
| void C2_MacroAssembler::reduceB(int opcode, int vlen, |
| Register dst, Register src1, XMMRegister src2, |
| XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 8: reduce8B (opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 16: reduce16B(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 32: reduce32B(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 64: reduce64B(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::mulreduceB(int opcode, int vlen, |
| Register dst, Register src1, XMMRegister src2, |
| XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 8: mulreduce8B (opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 16: mulreduce16B(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 32: mulreduce32B(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 64: mulreduce64B(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::reduceS(int opcode, int vlen, |
| Register dst, Register src1, XMMRegister src2, |
| XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 4: reduce4S (opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 8: reduce8S (opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 16: reduce16S(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 32: reduce32S(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::reduceI(int opcode, int vlen, |
| Register dst, Register src1, XMMRegister src2, |
| XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 2: reduce2I (opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 4: reduce4I (opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 8: reduce8I (opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 16: reduce16I(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::reduceL(int opcode, int vlen, |
| Register dst, Register src1, XMMRegister src2, |
| XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 2: reduce2L(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 4: reduce4L(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| case 8: reduce8L(opcode, dst, src1, src2, vtmp1, vtmp2); break; |
| |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::reduceF(int opcode, int vlen, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 2: |
| assert(vtmp2 == xnoreg, ""); |
| reduce2F(opcode, dst, src, vtmp1); |
| break; |
| case 4: |
| assert(vtmp2 == xnoreg, ""); |
| reduce4F(opcode, dst, src, vtmp1); |
| break; |
| case 8: |
| reduce8F(opcode, dst, src, vtmp1, vtmp2); |
| break; |
| case 16: |
| reduce16F(opcode, dst, src, vtmp1, vtmp2); |
| break; |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::reduceD(int opcode, int vlen, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 2: |
| assert(vtmp2 == xnoreg, ""); |
| reduce2D(opcode, dst, src, vtmp1); |
| break; |
| case 4: |
| reduce4D(opcode, dst, src, vtmp1, vtmp2); |
| break; |
| case 8: |
| reduce8D(opcode, dst, src, vtmp1, vtmp2); |
| break; |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::unorderedReduceF(int opcode, int vlen, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 2: |
| assert(vtmp1 == xnoreg, ""); |
| assert(vtmp2 == xnoreg, ""); |
| unorderedReduce2F(opcode, dst, src); |
| break; |
| case 4: |
| assert(vtmp2 == xnoreg, ""); |
| unorderedReduce4F(opcode, dst, src, vtmp1); |
| break; |
| case 8: |
| unorderedReduce8F(opcode, dst, src, vtmp1, vtmp2); |
| break; |
| case 16: |
| unorderedReduce16F(opcode, dst, src, vtmp1, vtmp2); |
| break; |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::unorderedReduceD(int opcode, int vlen, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| switch (vlen) { |
| case 2: |
| assert(vtmp1 == xnoreg, ""); |
| assert(vtmp2 == xnoreg, ""); |
| unorderedReduce2D(opcode, dst, src); |
| break; |
| case 4: |
| assert(vtmp2 == xnoreg, ""); |
| unorderedReduce4D(opcode, dst, src, vtmp1); |
| break; |
| case 8: |
| unorderedReduce8D(opcode, dst, src, vtmp1, vtmp2); |
| break; |
| default: assert(false, "wrong vector length"); |
| } |
| } |
| |
| void C2_MacroAssembler::reduce2I(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| if (opcode == Op_AddReductionVI) { |
| if (vtmp1 != src2) { |
| movdqu(vtmp1, src2); |
| } |
| phaddd(vtmp1, vtmp1); |
| } else { |
| pshufd(vtmp1, src2, 0x1); |
| reduce_operation_128(T_INT, opcode, vtmp1, src2); |
| } |
| movdl(vtmp2, src1); |
| reduce_operation_128(T_INT, opcode, vtmp1, vtmp2); |
| movdl(dst, vtmp1); |
| } |
| |
| void C2_MacroAssembler::reduce4I(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| if (opcode == Op_AddReductionVI) { |
| if (vtmp1 != src2) { |
| movdqu(vtmp1, src2); |
| } |
| phaddd(vtmp1, src2); |
| reduce2I(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } else { |
| pshufd(vtmp2, src2, 0xE); |
| reduce_operation_128(T_INT, opcode, vtmp2, src2); |
| reduce2I(opcode, dst, src1, vtmp2, vtmp1, vtmp2); |
| } |
| } |
| |
| void C2_MacroAssembler::reduce8I(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| if (opcode == Op_AddReductionVI) { |
| vphaddd(vtmp1, src2, src2, Assembler::AVX_256bit); |
| vextracti128_high(vtmp2, vtmp1); |
| vpaddd(vtmp1, vtmp1, vtmp2, Assembler::AVX_128bit); |
| reduce2I(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } else { |
| vextracti128_high(vtmp1, src2); |
| reduce_operation_128(T_INT, opcode, vtmp1, src2); |
| reduce4I(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } |
| } |
| |
| void C2_MacroAssembler::reduce16I(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| vextracti64x4_high(vtmp2, src2); |
| reduce_operation_256(T_INT, opcode, vtmp2, vtmp2, src2); |
| reduce8I(opcode, dst, src1, vtmp2, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce8B(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| pshufd(vtmp2, src2, 0x1); |
| reduce_operation_128(T_BYTE, opcode, vtmp2, src2); |
| movdqu(vtmp1, vtmp2); |
| psrldq(vtmp1, 2); |
| reduce_operation_128(T_BYTE, opcode, vtmp1, vtmp2); |
| movdqu(vtmp2, vtmp1); |
| psrldq(vtmp2, 1); |
| reduce_operation_128(T_BYTE, opcode, vtmp1, vtmp2); |
| movdl(vtmp2, src1); |
| pmovsxbd(vtmp1, vtmp1); |
| reduce_operation_128(T_INT, opcode, vtmp1, vtmp2); |
| pextrb(dst, vtmp1, 0x0); |
| movsbl(dst, dst); |
| } |
| |
| void C2_MacroAssembler::reduce16B(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| pshufd(vtmp1, src2, 0xE); |
| reduce_operation_128(T_BYTE, opcode, vtmp1, src2); |
| reduce8B(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce32B(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| vextracti128_high(vtmp2, src2); |
| reduce_operation_128(T_BYTE, opcode, vtmp2, src2); |
| reduce16B(opcode, dst, src1, vtmp2, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce64B(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| vextracti64x4_high(vtmp1, src2); |
| reduce_operation_256(T_BYTE, opcode, vtmp1, vtmp1, src2); |
| reduce32B(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::mulreduce8B(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| pmovsxbw(vtmp2, src2); |
| reduce8S(opcode, dst, src1, vtmp2, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::mulreduce16B(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| if (UseAVX > 1) { |
| int vector_len = Assembler::AVX_256bit; |
| vpmovsxbw(vtmp1, src2, vector_len); |
| reduce16S(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } else { |
| pmovsxbw(vtmp2, src2); |
| reduce8S(opcode, dst, src1, vtmp2, vtmp1, vtmp2); |
| pshufd(vtmp2, src2, 0x1); |
| pmovsxbw(vtmp2, src2); |
| reduce8S(opcode, dst, dst, vtmp2, vtmp1, vtmp2); |
| } |
| } |
| |
| void C2_MacroAssembler::mulreduce32B(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| if (UseAVX > 2 && VM_Version::supports_avx512bw()) { |
| int vector_len = Assembler::AVX_512bit; |
| vpmovsxbw(vtmp1, src2, vector_len); |
| reduce32S(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } else { |
| assert(UseAVX >= 2,"Should not reach here."); |
| mulreduce16B(opcode, dst, src1, src2, vtmp1, vtmp2); |
| vextracti128_high(vtmp2, src2); |
| mulreduce16B(opcode, dst, dst, vtmp2, vtmp1, vtmp2); |
| } |
| } |
| |
| void C2_MacroAssembler::mulreduce64B(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| mulreduce32B(opcode, dst, src1, src2, vtmp1, vtmp2); |
| vextracti64x4_high(vtmp2, src2); |
| mulreduce32B(opcode, dst, dst, vtmp2, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce4S(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| if (opcode == Op_AddReductionVI) { |
| if (vtmp1 != src2) { |
| movdqu(vtmp1, src2); |
| } |
| phaddw(vtmp1, vtmp1); |
| phaddw(vtmp1, vtmp1); |
| } else { |
| pshufd(vtmp2, src2, 0x1); |
| reduce_operation_128(T_SHORT, opcode, vtmp2, src2); |
| movdqu(vtmp1, vtmp2); |
| psrldq(vtmp1, 2); |
| reduce_operation_128(T_SHORT, opcode, vtmp1, vtmp2); |
| } |
| movdl(vtmp2, src1); |
| pmovsxwd(vtmp1, vtmp1); |
| reduce_operation_128(T_INT, opcode, vtmp1, vtmp2); |
| pextrw(dst, vtmp1, 0x0); |
| movswl(dst, dst); |
| } |
| |
| void C2_MacroAssembler::reduce8S(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| if (opcode == Op_AddReductionVI) { |
| if (vtmp1 != src2) { |
| movdqu(vtmp1, src2); |
| } |
| phaddw(vtmp1, src2); |
| } else { |
| pshufd(vtmp1, src2, 0xE); |
| reduce_operation_128(T_SHORT, opcode, vtmp1, src2); |
| } |
| reduce4S(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce16S(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| if (opcode == Op_AddReductionVI) { |
| int vector_len = Assembler::AVX_256bit; |
| vphaddw(vtmp2, src2, src2, vector_len); |
| vpermq(vtmp2, vtmp2, 0xD8, vector_len); |
| } else { |
| vextracti128_high(vtmp2, src2); |
| reduce_operation_128(T_SHORT, opcode, vtmp2, src2); |
| } |
| reduce8S(opcode, dst, src1, vtmp2, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce32S(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| int vector_len = Assembler::AVX_256bit; |
| vextracti64x4_high(vtmp1, src2); |
| reduce_operation_256(T_SHORT, opcode, vtmp1, vtmp1, src2); |
| reduce16S(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce2L(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| pshufd(vtmp2, src2, 0xE); |
| reduce_operation_128(T_LONG, opcode, vtmp2, src2); |
| movdq(vtmp1, src1); |
| reduce_operation_128(T_LONG, opcode, vtmp1, vtmp2); |
| movdq(dst, vtmp1); |
| } |
| |
| void C2_MacroAssembler::reduce4L(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| vextracti128_high(vtmp1, src2); |
| reduce_operation_128(T_LONG, opcode, vtmp1, src2); |
| reduce2L(opcode, dst, src1, vtmp1, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce8L(int opcode, Register dst, Register src1, XMMRegister src2, XMMRegister vtmp1, XMMRegister vtmp2) { |
| vextracti64x4_high(vtmp2, src2); |
| reduce_operation_256(T_LONG, opcode, vtmp2, vtmp2, src2); |
| reduce4L(opcode, dst, src1, vtmp2, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::genmask(KRegister dst, Register len, Register temp) { |
| mov64(temp, -1L); |
| bzhiq(temp, temp, len); |
| kmovql(dst, temp); |
| } |
| |
| void C2_MacroAssembler::reduce2F(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp) { |
| reduce_operation_128(T_FLOAT, opcode, dst, src); |
| pshufd(vtmp, src, 0x1); |
| reduce_operation_128(T_FLOAT, opcode, dst, vtmp); |
| } |
| |
| void C2_MacroAssembler::reduce4F(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp) { |
| reduce2F(opcode, dst, src, vtmp); |
| pshufd(vtmp, src, 0x2); |
| reduce_operation_128(T_FLOAT, opcode, dst, vtmp); |
| pshufd(vtmp, src, 0x3); |
| reduce_operation_128(T_FLOAT, opcode, dst, vtmp); |
| } |
| |
| void C2_MacroAssembler::reduce8F(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| reduce4F(opcode, dst, src, vtmp2); |
| vextractf128_high(vtmp2, src); |
| reduce4F(opcode, dst, vtmp2, vtmp1); |
| } |
| |
| void C2_MacroAssembler::reduce16F(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| reduce8F(opcode, dst, src, vtmp1, vtmp2); |
| vextracti64x4_high(vtmp1, src); |
| reduce8F(opcode, dst, vtmp1, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::unorderedReduce2F(int opcode, XMMRegister dst, XMMRegister src) { |
| pshufd(dst, src, 0x1); |
| reduce_operation_128(T_FLOAT, opcode, dst, src); |
| } |
| |
| void C2_MacroAssembler::unorderedReduce4F(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp) { |
| pshufd(vtmp, src, 0xE); |
| unordered_reduce_operation_128(T_FLOAT, opcode, vtmp, src); |
| unorderedReduce2F(opcode, dst, vtmp); |
| } |
| |
| void C2_MacroAssembler::unorderedReduce8F(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| vextractf128_high(vtmp1, src); |
| unordered_reduce_operation_128(T_FLOAT, opcode, vtmp1, src); |
| unorderedReduce4F(opcode, dst, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::unorderedReduce16F(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| vextractf64x4_high(vtmp2, src); |
| unordered_reduce_operation_256(T_FLOAT, opcode, vtmp2, vtmp2, src); |
| unorderedReduce8F(opcode, dst, vtmp2, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::reduce2D(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp) { |
| reduce_operation_128(T_DOUBLE, opcode, dst, src); |
| pshufd(vtmp, src, 0xE); |
| reduce_operation_128(T_DOUBLE, opcode, dst, vtmp); |
| } |
| |
| void C2_MacroAssembler::reduce4D(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| reduce2D(opcode, dst, src, vtmp2); |
| vextractf128_high(vtmp2, src); |
| reduce2D(opcode, dst, vtmp2, vtmp1); |
| } |
| |
| void C2_MacroAssembler::reduce8D(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| reduce4D(opcode, dst, src, vtmp1, vtmp2); |
| vextracti64x4_high(vtmp1, src); |
| reduce4D(opcode, dst, vtmp1, vtmp1, vtmp2); |
| } |
| |
| void C2_MacroAssembler::unorderedReduce2D(int opcode, XMMRegister dst, XMMRegister src) { |
| pshufd(dst, src, 0xE); |
| reduce_operation_128(T_DOUBLE, opcode, dst, src); |
| } |
| |
| void C2_MacroAssembler::unorderedReduce4D(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp) { |
| vextractf128_high(vtmp, src); |
| unordered_reduce_operation_128(T_DOUBLE, opcode, vtmp, src); |
| unorderedReduce2D(opcode, dst, vtmp); |
| } |
| |
| void C2_MacroAssembler::unorderedReduce8D(int opcode, XMMRegister dst, XMMRegister src, XMMRegister vtmp1, XMMRegister vtmp2) { |
| vextractf64x4_high(vtmp2, src); |
| unordered_reduce_operation_256(T_DOUBLE, opcode, vtmp2, vtmp2, src); |
| unorderedReduce4D(opcode, dst, vtmp2, vtmp1); |
| } |
| |
| void C2_MacroAssembler::evmovdqu(BasicType type, KRegister kmask, XMMRegister dst, Address src, bool merge, int vector_len) { |
| MacroAssembler::evmovdqu(type, kmask, dst, src, merge, vector_len); |
| } |
| |
| void C2_MacroAssembler::evmovdqu(BasicType type, KRegister kmask, Address dst, XMMRegister src, bool merge, int vector_len) { |
| MacroAssembler::evmovdqu(type, kmask, dst, src, merge, vector_len); |
| } |
| |
| void C2_MacroAssembler::evmovdqu(BasicType type, KRegister kmask, XMMRegister dst, XMMRegister src, bool merge, int vector_len) { |
| MacroAssembler::evmovdqu(type, kmask, dst, src, merge, vector_len); |
| } |
| |
| void C2_MacroAssembler::vmovmask(BasicType elem_bt, XMMRegister dst, Address src, XMMRegister mask, |
| int vec_enc) { |
| switch(elem_bt) { |
| case T_INT: |
| case T_FLOAT: |
| vmaskmovps(dst, src, mask, vec_enc); |
| break; |
| case T_LONG: |
| case T_DOUBLE: |
| vmaskmovpd(dst, src, mask, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vmovmask(BasicType elem_bt, Address dst, XMMRegister src, XMMRegister mask, |
| int vec_enc) { |
| switch(elem_bt) { |
| case T_INT: |
| case T_FLOAT: |
| vmaskmovps(dst, src, mask, vec_enc); |
| break; |
| case T_LONG: |
| case T_DOUBLE: |
| vmaskmovpd(dst, src, mask, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::reduceFloatMinMax(int opcode, int vlen, bool is_dst_valid, |
| XMMRegister dst, XMMRegister src, |
| XMMRegister tmp, XMMRegister atmp, XMMRegister btmp, |
| XMMRegister xmm_0, XMMRegister xmm_1) { |
| const int permconst[] = {1, 14}; |
| XMMRegister wsrc = src; |
| XMMRegister wdst = xmm_0; |
| XMMRegister wtmp = (xmm_1 == xnoreg) ? xmm_0: xmm_1; |
| |
| int vlen_enc = Assembler::AVX_128bit; |
| if (vlen == 16) { |
| vlen_enc = Assembler::AVX_256bit; |
| } |
| |
| for (int i = log2(vlen) - 1; i >=0; i--) { |
| if (i == 0 && !is_dst_valid) { |
| wdst = dst; |
| } |
| if (i == 3) { |
| vextracti64x4_high(wtmp, wsrc); |
| } else if (i == 2) { |
| vextracti128_high(wtmp, wsrc); |
| } else { // i = [0,1] |
| vpermilps(wtmp, wsrc, permconst[i], vlen_enc); |
| } |
| vminmax_fp(opcode, T_FLOAT, wdst, wtmp, wsrc, tmp, atmp, btmp, vlen_enc); |
| wsrc = wdst; |
| vlen_enc = Assembler::AVX_128bit; |
| } |
| if (is_dst_valid) { |
| vminmax_fp(opcode, T_FLOAT, dst, wdst, dst, tmp, atmp, btmp, Assembler::AVX_128bit); |
| } |
| } |
| |
| void C2_MacroAssembler::reduceDoubleMinMax(int opcode, int vlen, bool is_dst_valid, XMMRegister dst, XMMRegister src, |
| XMMRegister tmp, XMMRegister atmp, XMMRegister btmp, |
| XMMRegister xmm_0, XMMRegister xmm_1) { |
| XMMRegister wsrc = src; |
| XMMRegister wdst = xmm_0; |
| XMMRegister wtmp = (xmm_1 == xnoreg) ? xmm_0: xmm_1; |
| int vlen_enc = Assembler::AVX_128bit; |
| if (vlen == 8) { |
| vlen_enc = Assembler::AVX_256bit; |
| } |
| for (int i = log2(vlen) - 1; i >=0; i--) { |
| if (i == 0 && !is_dst_valid) { |
| wdst = dst; |
| } |
| if (i == 1) { |
| vextracti128_high(wtmp, wsrc); |
| } else if (i == 2) { |
| vextracti64x4_high(wtmp, wsrc); |
| } else { |
| assert(i == 0, "%d", i); |
| vpermilpd(wtmp, wsrc, 1, vlen_enc); |
| } |
| vminmax_fp(opcode, T_DOUBLE, wdst, wtmp, wsrc, tmp, atmp, btmp, vlen_enc); |
| wsrc = wdst; |
| vlen_enc = Assembler::AVX_128bit; |
| } |
| if (is_dst_valid) { |
| vminmax_fp(opcode, T_DOUBLE, dst, wdst, dst, tmp, atmp, btmp, Assembler::AVX_128bit); |
| } |
| } |
| |
| void C2_MacroAssembler::extract(BasicType bt, Register dst, XMMRegister src, int idx) { |
| switch (bt) { |
| case T_BYTE: pextrb(dst, src, idx); break; |
| case T_SHORT: pextrw(dst, src, idx); break; |
| case T_INT: pextrd(dst, src, idx); break; |
| case T_LONG: pextrq(dst, src, idx); break; |
| |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| XMMRegister C2_MacroAssembler::get_lane(BasicType typ, XMMRegister dst, XMMRegister src, int elemindex) { |
| int esize = type2aelembytes(typ); |
| int elem_per_lane = 16/esize; |
| int lane = elemindex / elem_per_lane; |
| int eindex = elemindex % elem_per_lane; |
| |
| if (lane >= 2) { |
| assert(UseAVX > 2, "required"); |
| vextractf32x4(dst, src, lane & 3); |
| return dst; |
| } else if (lane > 0) { |
| assert(UseAVX > 0, "required"); |
| vextractf128(dst, src, lane); |
| return dst; |
| } else { |
| return src; |
| } |
| } |
| |
| void C2_MacroAssembler::movsxl(BasicType typ, Register dst) { |
| if (typ == T_BYTE) { |
| movsbl(dst, dst); |
| } else if (typ == T_SHORT) { |
| movswl(dst, dst); |
| } |
| } |
| |
| void C2_MacroAssembler::get_elem(BasicType typ, Register dst, XMMRegister src, int elemindex) { |
| int esize = type2aelembytes(typ); |
| int elem_per_lane = 16/esize; |
| int eindex = elemindex % elem_per_lane; |
| assert(is_integral_type(typ),"required"); |
| |
| if (eindex == 0) { |
| if (typ == T_LONG) { |
| movq(dst, src); |
| } else { |
| movdl(dst, src); |
| movsxl(typ, dst); |
| } |
| } else { |
| extract(typ, dst, src, eindex); |
| movsxl(typ, dst); |
| } |
| } |
| |
| void C2_MacroAssembler::get_elem(BasicType typ, XMMRegister dst, XMMRegister src, int elemindex, XMMRegister vtmp) { |
| int esize = type2aelembytes(typ); |
| int elem_per_lane = 16/esize; |
| int eindex = elemindex % elem_per_lane; |
| assert((typ == T_FLOAT || typ == T_DOUBLE),"required"); |
| |
| if (eindex == 0) { |
| movq(dst, src); |
| } else { |
| if (typ == T_FLOAT) { |
| if (UseAVX == 0) { |
| movdqu(dst, src); |
| shufps(dst, dst, eindex); |
| } else { |
| vshufps(dst, src, src, eindex, Assembler::AVX_128bit); |
| } |
| } else { |
| if (UseAVX == 0) { |
| movdqu(dst, src); |
| psrldq(dst, eindex*esize); |
| } else { |
| vpsrldq(dst, src, eindex*esize, Assembler::AVX_128bit); |
| } |
| movq(dst, dst); |
| } |
| } |
| // Zero upper bits |
| if (typ == T_FLOAT) { |
| if (UseAVX == 0) { |
| assert(vtmp != xnoreg, "required."); |
| movdqu(vtmp, ExternalAddress(StubRoutines::x86::vector_32_bit_mask()), noreg); |
| pand(dst, vtmp); |
| } else { |
| vpand(dst, dst, ExternalAddress(StubRoutines::x86::vector_32_bit_mask()), Assembler::AVX_128bit, noreg); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::evpcmp(BasicType typ, KRegister kdmask, KRegister ksmask, XMMRegister src1, XMMRegister src2, int comparison, int vector_len) { |
| switch(typ) { |
| case T_BYTE: |
| case T_BOOLEAN: |
| evpcmpb(kdmask, ksmask, src1, src2, comparison, /*signed*/ true, vector_len); |
| break; |
| case T_SHORT: |
| case T_CHAR: |
| evpcmpw(kdmask, ksmask, src1, src2, comparison, /*signed*/ true, vector_len); |
| break; |
| case T_INT: |
| case T_FLOAT: |
| evpcmpd(kdmask, ksmask, src1, src2, comparison, /*signed*/ true, vector_len); |
| break; |
| case T_LONG: |
| case T_DOUBLE: |
| evpcmpq(kdmask, ksmask, src1, src2, comparison, /*signed*/ true, vector_len); |
| break; |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evpcmp(BasicType typ, KRegister kdmask, KRegister ksmask, XMMRegister src1, AddressLiteral src2, int comparison, int vector_len, Register rscratch) { |
| assert(rscratch != noreg || always_reachable(src2), "missing"); |
| |
| switch(typ) { |
| case T_BOOLEAN: |
| case T_BYTE: |
| evpcmpb(kdmask, ksmask, src1, src2, comparison, /*signed*/ true, vector_len, rscratch); |
| break; |
| case T_CHAR: |
| case T_SHORT: |
| evpcmpw(kdmask, ksmask, src1, src2, comparison, /*signed*/ true, vector_len, rscratch); |
| break; |
| case T_INT: |
| case T_FLOAT: |
| evpcmpd(kdmask, ksmask, src1, src2, comparison, /*signed*/ true, vector_len, rscratch); |
| break; |
| case T_LONG: |
| case T_DOUBLE: |
| evpcmpq(kdmask, ksmask, src1, src2, comparison, /*signed*/ true, vector_len, rscratch); |
| break; |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evpblend(BasicType typ, XMMRegister dst, KRegister kmask, XMMRegister src1, XMMRegister src2, bool merge, int vector_len) { |
| switch(typ) { |
| case T_BYTE: |
| evpblendmb(dst, kmask, src1, src2, merge, vector_len); |
| break; |
| case T_SHORT: |
| evpblendmw(dst, kmask, src1, src2, merge, vector_len); |
| break; |
| case T_INT: |
| case T_FLOAT: |
| evpblendmd(dst, kmask, src1, src2, merge, vector_len); |
| break; |
| case T_LONG: |
| case T_DOUBLE: |
| evpblendmq(dst, kmask, src1, src2, merge, vector_len); |
| break; |
| default: |
| assert(false,"Should not reach here."); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vectortest(BasicType bt, XMMRegister src1, XMMRegister src2, XMMRegister vtmp, int vlen_in_bytes) { |
| assert(vlen_in_bytes <= 32, ""); |
| int esize = type2aelembytes(bt); |
| if (vlen_in_bytes == 32) { |
| assert(vtmp == xnoreg, "required."); |
| if (esize >= 4) { |
| vtestps(src1, src2, AVX_256bit); |
| } else { |
| vptest(src1, src2, AVX_256bit); |
| } |
| return; |
| } |
| if (vlen_in_bytes < 16) { |
| // Duplicate the lower part to fill the whole register, |
| // Don't need to do so for src2 |
| assert(vtmp != xnoreg, "required"); |
| int shuffle_imm = (vlen_in_bytes == 4) ? 0x00 : 0x04; |
| pshufd(vtmp, src1, shuffle_imm); |
| } else { |
| assert(vtmp == xnoreg, "required"); |
| vtmp = src1; |
| } |
| if (esize >= 4 && VM_Version::supports_avx()) { |
| vtestps(vtmp, src2, AVX_128bit); |
| } else { |
| ptest(vtmp, src2); |
| } |
| } |
| |
| void C2_MacroAssembler::vpadd(BasicType elem_bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, int vlen_enc) { |
| #ifdef ASSERT |
| bool is_bw = ((elem_bt == T_BYTE) || (elem_bt == T_SHORT)); |
| bool is_bw_supported = VM_Version::supports_avx512bw(); |
| if (is_bw && !is_bw_supported) { |
| assert(vlen_enc != Assembler::AVX_512bit, "required"); |
| assert((dst->encoding() < 16) && (src1->encoding() < 16) && (src2->encoding() < 16), |
| "XMM register should be 0-15"); |
| } |
| #endif // ASSERT |
| switch (elem_bt) { |
| case T_BYTE: vpaddb(dst, src1, src2, vlen_enc); return; |
| case T_SHORT: vpaddw(dst, src1, src2, vlen_enc); return; |
| case T_INT: vpaddd(dst, src1, src2, vlen_enc); return; |
| case T_FLOAT: vaddps(dst, src1, src2, vlen_enc); return; |
| case T_LONG: vpaddq(dst, src1, src2, vlen_enc); return; |
| case T_DOUBLE: vaddpd(dst, src1, src2, vlen_enc); return; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); return; |
| } |
| } |
| |
| void C2_MacroAssembler::vpbroadcast(BasicType elem_bt, XMMRegister dst, Register src, int vlen_enc) { |
| assert(UseAVX >= 2, "required"); |
| bool is_bw = ((elem_bt == T_BYTE) || (elem_bt == T_SHORT)); |
| bool is_vl = vlen_enc != Assembler::AVX_512bit; |
| if ((UseAVX > 2) && |
| (!is_bw || VM_Version::supports_avx512bw()) && |
| (!is_vl || VM_Version::supports_avx512vl())) { |
| switch (elem_bt) { |
| case T_BYTE: evpbroadcastb(dst, src, vlen_enc); return; |
| case T_SHORT: evpbroadcastw(dst, src, vlen_enc); return; |
| case T_FLOAT: case T_INT: evpbroadcastd(dst, src, vlen_enc); return; |
| case T_DOUBLE: case T_LONG: evpbroadcastq(dst, src, vlen_enc); return; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); return; |
| } |
| } else { |
| assert(vlen_enc != Assembler::AVX_512bit, "required"); |
| assert((dst->encoding() < 16),"XMM register should be 0-15"); |
| switch (elem_bt) { |
| case T_BYTE: movdl(dst, src); vpbroadcastb(dst, dst, vlen_enc); return; |
| case T_SHORT: movdl(dst, src); vpbroadcastw(dst, dst, vlen_enc); return; |
| case T_INT: movdl(dst, src); vpbroadcastd(dst, dst, vlen_enc); return; |
| case T_FLOAT: movdl(dst, src); vbroadcastss(dst, dst, vlen_enc); return; |
| case T_LONG: movdq(dst, src); vpbroadcastq(dst, dst, vlen_enc); return; |
| case T_DOUBLE: movdq(dst, src); vbroadcastsd(dst, dst, vlen_enc); return; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); return; |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vconvert_b2x(BasicType to_elem_bt, XMMRegister dst, XMMRegister src, int vlen_enc) { |
| switch (to_elem_bt) { |
| case T_SHORT: |
| vpmovsxbw(dst, src, vlen_enc); |
| break; |
| case T_INT: |
| vpmovsxbd(dst, src, vlen_enc); |
| break; |
| case T_FLOAT: |
| vpmovsxbd(dst, src, vlen_enc); |
| vcvtdq2ps(dst, dst, vlen_enc); |
| break; |
| case T_LONG: |
| vpmovsxbq(dst, src, vlen_enc); |
| break; |
| case T_DOUBLE: { |
| int mid_vlen_enc = (vlen_enc == Assembler::AVX_512bit) ? Assembler::AVX_256bit : Assembler::AVX_128bit; |
| vpmovsxbd(dst, src, mid_vlen_enc); |
| vcvtdq2pd(dst, dst, vlen_enc); |
| break; |
| } |
| default: |
| fatal("Unsupported type %s", type2name(to_elem_bt)); |
| break; |
| } |
| } |
| |
| //------------------------------------------------------------------------------------------- |
| |
| // IndexOf for constant substrings with size >= 8 chars |
| // which don't need to be loaded through stack. |
| void C2_MacroAssembler::string_indexofC8(Register str1, Register str2, |
| Register cnt1, Register cnt2, |
| int int_cnt2, Register result, |
| XMMRegister vec, Register tmp, |
| int ae) { |
| ShortBranchVerifier sbv(this); |
| assert(UseSSE42Intrinsics, "SSE4.2 intrinsics are required"); |
| assert(ae != StrIntrinsicNode::LU, "Invalid encoding"); |
| |
| // This method uses the pcmpestri instruction with bound registers |
| // inputs: |
| // xmm - substring |
| // rax - substring length (elements count) |
| // mem - scanned string |
| // rdx - string length (elements count) |
| // 0xd - mode: 1100 (substring search) + 01 (unsigned shorts) |
| // 0xc - mode: 1100 (substring search) + 00 (unsigned bytes) |
| // outputs: |
| // rcx - matched index in string |
| assert(cnt1 == rdx && cnt2 == rax && tmp == rcx, "pcmpestri"); |
| int mode = (ae == StrIntrinsicNode::LL) ? 0x0c : 0x0d; // bytes or shorts |
| int stride = (ae == StrIntrinsicNode::LL) ? 16 : 8; //UU, UL -> 8 |
| Address::ScaleFactor scale1 = (ae == StrIntrinsicNode::LL) ? Address::times_1 : Address::times_2; |
| Address::ScaleFactor scale2 = (ae == StrIntrinsicNode::UL) ? Address::times_1 : scale1; |
| |
| Label RELOAD_SUBSTR, SCAN_TO_SUBSTR, SCAN_SUBSTR, |
| RET_FOUND, RET_NOT_FOUND, EXIT, FOUND_SUBSTR, |
| MATCH_SUBSTR_HEAD, RELOAD_STR, FOUND_CANDIDATE; |
| |
| // Note, inline_string_indexOf() generates checks: |
| // if (substr.count > string.count) return -1; |
| // if (substr.count == 0) return 0; |
| assert(int_cnt2 >= stride, "this code is used only for cnt2 >= 8 chars"); |
| |
| // Load substring. |
| if (ae == StrIntrinsicNode::UL) { |
| pmovzxbw(vec, Address(str2, 0)); |
| } else { |
| movdqu(vec, Address(str2, 0)); |
| } |
| movl(cnt2, int_cnt2); |
| movptr(result, str1); // string addr |
| |
| if (int_cnt2 > stride) { |
| jmpb(SCAN_TO_SUBSTR); |
| |
| // Reload substr for rescan, this code |
| // is executed only for large substrings (> 8 chars) |
| bind(RELOAD_SUBSTR); |
| if (ae == StrIntrinsicNode::UL) { |
| pmovzxbw(vec, Address(str2, 0)); |
| } else { |
| movdqu(vec, Address(str2, 0)); |
| } |
| negptr(cnt2); // Jumped here with negative cnt2, convert to positive |
| |
| bind(RELOAD_STR); |
| // We came here after the beginning of the substring was |
| // matched but the rest of it was not so we need to search |
| // again. Start from the next element after the previous match. |
| |
| // cnt2 is number of substring reminding elements and |
| // cnt1 is number of string reminding elements when cmp failed. |
| // Restored cnt1 = cnt1 - cnt2 + int_cnt2 |
| subl(cnt1, cnt2); |
| addl(cnt1, int_cnt2); |
| movl(cnt2, int_cnt2); // Now restore cnt2 |
| |
| decrementl(cnt1); // Shift to next element |
| cmpl(cnt1, cnt2); |
| jcc(Assembler::negative, RET_NOT_FOUND); // Left less then substring |
| |
| addptr(result, (1<<scale1)); |
| |
| } // (int_cnt2 > 8) |
| |
| // Scan string for start of substr in 16-byte vectors |
| bind(SCAN_TO_SUBSTR); |
| pcmpestri(vec, Address(result, 0), mode); |
| jccb(Assembler::below, FOUND_CANDIDATE); // CF == 1 |
| subl(cnt1, stride); |
| jccb(Assembler::lessEqual, RET_NOT_FOUND); // Scanned full string |
| cmpl(cnt1, cnt2); |
| jccb(Assembler::negative, RET_NOT_FOUND); // Left less then substring |
| addptr(result, 16); |
| jmpb(SCAN_TO_SUBSTR); |
| |
| // Found a potential substr |
| bind(FOUND_CANDIDATE); |
| // Matched whole vector if first element matched (tmp(rcx) == 0). |
| if (int_cnt2 == stride) { |
| jccb(Assembler::overflow, RET_FOUND); // OF == 1 |
| } else { // int_cnt2 > 8 |
| jccb(Assembler::overflow, FOUND_SUBSTR); |
| } |
| // After pcmpestri tmp(rcx) contains matched element index |
| // Compute start addr of substr |
| lea(result, Address(result, tmp, scale1)); |
| |
| // Make sure string is still long enough |
| subl(cnt1, tmp); |
| cmpl(cnt1, cnt2); |
| if (int_cnt2 == stride) { |
| jccb(Assembler::greaterEqual, SCAN_TO_SUBSTR); |
| } else { // int_cnt2 > 8 |
| jccb(Assembler::greaterEqual, MATCH_SUBSTR_HEAD); |
| } |
| // Left less then substring. |
| |
| bind(RET_NOT_FOUND); |
| movl(result, -1); |
| jmp(EXIT); |
| |
| if (int_cnt2 > stride) { |
| // This code is optimized for the case when whole substring |
| // is matched if its head is matched. |
| bind(MATCH_SUBSTR_HEAD); |
| pcmpestri(vec, Address(result, 0), mode); |
| // Reload only string if does not match |
| jcc(Assembler::noOverflow, RELOAD_STR); // OF == 0 |
| |
| Label CONT_SCAN_SUBSTR; |
| // Compare the rest of substring (> 8 chars). |
| bind(FOUND_SUBSTR); |
| // First 8 chars are already matched. |
| negptr(cnt2); |
| addptr(cnt2, stride); |
| |
| bind(SCAN_SUBSTR); |
| subl(cnt1, stride); |
| cmpl(cnt2, -stride); // Do not read beyond substring |
| jccb(Assembler::lessEqual, CONT_SCAN_SUBSTR); |
| // Back-up strings to avoid reading beyond substring: |
| // cnt1 = cnt1 - cnt2 + 8 |
| addl(cnt1, cnt2); // cnt2 is negative |
| addl(cnt1, stride); |
| movl(cnt2, stride); negptr(cnt2); |
| bind(CONT_SCAN_SUBSTR); |
| if (int_cnt2 < (int)G) { |
| int tail_off1 = int_cnt2<<scale1; |
| int tail_off2 = int_cnt2<<scale2; |
| if (ae == StrIntrinsicNode::UL) { |
| pmovzxbw(vec, Address(str2, cnt2, scale2, tail_off2)); |
| } else { |
| movdqu(vec, Address(str2, cnt2, scale2, tail_off2)); |
| } |
| pcmpestri(vec, Address(result, cnt2, scale1, tail_off1), mode); |
| } else { |
| // calculate index in register to avoid integer overflow (int_cnt2*2) |
| movl(tmp, int_cnt2); |
| addptr(tmp, cnt2); |
| if (ae == StrIntrinsicNode::UL) { |
| pmovzxbw(vec, Address(str2, tmp, scale2, 0)); |
| } else { |
| movdqu(vec, Address(str2, tmp, scale2, 0)); |
| } |
| pcmpestri(vec, Address(result, tmp, scale1, 0), mode); |
| } |
| // Need to reload strings pointers if not matched whole vector |
| jcc(Assembler::noOverflow, RELOAD_SUBSTR); // OF == 0 |
| addptr(cnt2, stride); |
| jcc(Assembler::negative, SCAN_SUBSTR); |
| // Fall through if found full substring |
| |
| } // (int_cnt2 > 8) |
| |
| bind(RET_FOUND); |
| // Found result if we matched full small substring. |
| // Compute substr offset |
| subptr(result, str1); |
| if (ae == StrIntrinsicNode::UU || ae == StrIntrinsicNode::UL) { |
| shrl(result, 1); // index |
| } |
| bind(EXIT); |
| |
| } // string_indexofC8 |
| |
| // Small strings are loaded through stack if they cross page boundary. |
| void C2_MacroAssembler::string_indexof(Register str1, Register str2, |
| Register cnt1, Register cnt2, |
| int int_cnt2, Register result, |
| XMMRegister vec, Register tmp, |
| int ae) { |
| ShortBranchVerifier sbv(this); |
| assert(UseSSE42Intrinsics, "SSE4.2 intrinsics are required"); |
| assert(ae != StrIntrinsicNode::LU, "Invalid encoding"); |
| |
| // |
| // int_cnt2 is length of small (< 8 chars) constant substring |
| // or (-1) for non constant substring in which case its length |
| // is in cnt2 register. |
| // |
| // Note, inline_string_indexOf() generates checks: |
| // if (substr.count > string.count) return -1; |
| // if (substr.count == 0) return 0; |
| // |
| int stride = (ae == StrIntrinsicNode::LL) ? 16 : 8; //UU, UL -> 8 |
| assert(int_cnt2 == -1 || (0 < int_cnt2 && int_cnt2 < stride), "should be != 0"); |
| // This method uses the pcmpestri instruction with bound registers |
| // inputs: |
| // xmm - substring |
| // rax - substring length (elements count) |
| // mem - scanned string |
| // rdx - string length (elements count) |
| // 0xd - mode: 1100 (substring search) + 01 (unsigned shorts) |
| // 0xc - mode: 1100 (substring search) + 00 (unsigned bytes) |
| // outputs: |
| // rcx - matched index in string |
| assert(cnt1 == rdx && cnt2 == rax && tmp == rcx, "pcmpestri"); |
| int mode = (ae == StrIntrinsicNode::LL) ? 0x0c : 0x0d; // bytes or shorts |
| Address::ScaleFactor scale1 = (ae == StrIntrinsicNode::LL) ? Address::times_1 : Address::times_2; |
| Address::ScaleFactor scale2 = (ae == StrIntrinsicNode::UL) ? Address::times_1 : scale1; |
| |
| Label RELOAD_SUBSTR, SCAN_TO_SUBSTR, SCAN_SUBSTR, ADJUST_STR, |
| RET_FOUND, RET_NOT_FOUND, CLEANUP, FOUND_SUBSTR, |
| FOUND_CANDIDATE; |
| |
| { //======================================================== |
| // We don't know where these strings are located |
| // and we can't read beyond them. Load them through stack. |
| Label BIG_STRINGS, CHECK_STR, COPY_SUBSTR, COPY_STR; |
| |
| movptr(tmp, rsp); // save old SP |
| |
| if (int_cnt2 > 0) { // small (< 8 chars) constant substring |
| if (int_cnt2 == (1>>scale2)) { // One byte |
| assert((ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UL), "Only possible for latin1 encoding"); |
| load_unsigned_byte(result, Address(str2, 0)); |
| movdl(vec, result); // move 32 bits |
| } else if (ae == StrIntrinsicNode::LL && int_cnt2 == 3) { // Three bytes |
| // Not enough header space in 32-bit VM: 12+3 = 15. |
| movl(result, Address(str2, -1)); |
| shrl(result, 8); |
| movdl(vec, result); // move 32 bits |
| } else if (ae != StrIntrinsicNode::UL && int_cnt2 == (2>>scale2)) { // One char |
| load_unsigned_short(result, Address(str2, 0)); |
| movdl(vec, result); // move 32 bits |
| } else if (ae != StrIntrinsicNode::UL && int_cnt2 == (4>>scale2)) { // Two chars |
| movdl(vec, Address(str2, 0)); // move 32 bits |
| } else if (ae != StrIntrinsicNode::UL && int_cnt2 == (8>>scale2)) { // Four chars |
| movq(vec, Address(str2, 0)); // move 64 bits |
| } else { // cnt2 = { 3, 5, 6, 7 } || (ae == StrIntrinsicNode::UL && cnt2 ={2, ..., 7}) |
| // Array header size is 12 bytes in 32-bit VM |
| // + 6 bytes for 3 chars == 18 bytes, |
| // enough space to load vec and shift. |
| assert(HeapWordSize*TypeArrayKlass::header_size() >= 12,"sanity"); |
| if (ae == StrIntrinsicNode::UL) { |
| int tail_off = int_cnt2-8; |
| pmovzxbw(vec, Address(str2, tail_off)); |
| psrldq(vec, -2*tail_off); |
| } |
| else { |
| int tail_off = int_cnt2*(1<<scale2); |
| movdqu(vec, Address(str2, tail_off-16)); |
| psrldq(vec, 16-tail_off); |
| } |
| } |
| } else { // not constant substring |
| cmpl(cnt2, stride); |
| jccb(Assembler::aboveEqual, BIG_STRINGS); // Both strings are big enough |
| |
| // We can read beyond string if srt+16 does not cross page boundary |
| // since heaps are aligned and mapped by pages. |
| assert(os::vm_page_size() < (int)G, "default page should be small"); |
| movl(result, str2); // We need only low 32 bits |
| andl(result, ((int)os::vm_page_size()-1)); |
| cmpl(result, ((int)os::vm_page_size()-16)); |
| jccb(Assembler::belowEqual, CHECK_STR); |
| |
| // Move small strings to stack to allow load 16 bytes into vec. |
| subptr(rsp, 16); |
| int stk_offset = wordSize-(1<<scale2); |
| push(cnt2); |
| |
| bind(COPY_SUBSTR); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UL) { |
| load_unsigned_byte(result, Address(str2, cnt2, scale2, -1)); |
| movb(Address(rsp, cnt2, scale2, stk_offset), result); |
| } else if (ae == StrIntrinsicNode::UU) { |
| load_unsigned_short(result, Address(str2, cnt2, scale2, -2)); |
| movw(Address(rsp, cnt2, scale2, stk_offset), result); |
| } |
| decrement(cnt2); |
| jccb(Assembler::notZero, COPY_SUBSTR); |
| |
| pop(cnt2); |
| movptr(str2, rsp); // New substring address |
| } // non constant |
| |
| bind(CHECK_STR); |
| cmpl(cnt1, stride); |
| jccb(Assembler::aboveEqual, BIG_STRINGS); |
| |
| // Check cross page boundary. |
| movl(result, str1); // We need only low 32 bits |
| andl(result, ((int)os::vm_page_size()-1)); |
| cmpl(result, ((int)os::vm_page_size()-16)); |
| jccb(Assembler::belowEqual, BIG_STRINGS); |
| |
| subptr(rsp, 16); |
| int stk_offset = -(1<<scale1); |
| if (int_cnt2 < 0) { // not constant |
| push(cnt2); |
| stk_offset += wordSize; |
| } |
| movl(cnt2, cnt1); |
| |
| bind(COPY_STR); |
| if (ae == StrIntrinsicNode::LL) { |
| load_unsigned_byte(result, Address(str1, cnt2, scale1, -1)); |
| movb(Address(rsp, cnt2, scale1, stk_offset), result); |
| } else { |
| load_unsigned_short(result, Address(str1, cnt2, scale1, -2)); |
| movw(Address(rsp, cnt2, scale1, stk_offset), result); |
| } |
| decrement(cnt2); |
| jccb(Assembler::notZero, COPY_STR); |
| |
| if (int_cnt2 < 0) { // not constant |
| pop(cnt2); |
| } |
| movptr(str1, rsp); // New string address |
| |
| bind(BIG_STRINGS); |
| // Load substring. |
| if (int_cnt2 < 0) { // -1 |
| if (ae == StrIntrinsicNode::UL) { |
| pmovzxbw(vec, Address(str2, 0)); |
| } else { |
| movdqu(vec, Address(str2, 0)); |
| } |
| push(cnt2); // substr count |
| push(str2); // substr addr |
| push(str1); // string addr |
| } else { |
| // Small (< 8 chars) constant substrings are loaded already. |
| movl(cnt2, int_cnt2); |
| } |
| push(tmp); // original SP |
| |
| } // Finished loading |
| |
| //======================================================== |
| // Start search |
| // |
| |
| movptr(result, str1); // string addr |
| |
| if (int_cnt2 < 0) { // Only for non constant substring |
| jmpb(SCAN_TO_SUBSTR); |
| |
| // SP saved at sp+0 |
| // String saved at sp+1*wordSize |
| // Substr saved at sp+2*wordSize |
| // Substr count saved at sp+3*wordSize |
| |
| // Reload substr for rescan, this code |
| // is executed only for large substrings (> 8 chars) |
| bind(RELOAD_SUBSTR); |
| movptr(str2, Address(rsp, 2*wordSize)); |
| movl(cnt2, Address(rsp, 3*wordSize)); |
| if (ae == StrIntrinsicNode::UL) { |
| pmovzxbw(vec, Address(str2, 0)); |
| } else { |
| movdqu(vec, Address(str2, 0)); |
| } |
| // We came here after the beginning of the substring was |
| // matched but the rest of it was not so we need to search |
| // again. Start from the next element after the previous match. |
| subptr(str1, result); // Restore counter |
| if (ae == StrIntrinsicNode::UU || ae == StrIntrinsicNode::UL) { |
| shrl(str1, 1); |
| } |
| addl(cnt1, str1); |
| decrementl(cnt1); // Shift to next element |
| cmpl(cnt1, cnt2); |
| jcc(Assembler::negative, RET_NOT_FOUND); // Left less then substring |
| |
| addptr(result, (1<<scale1)); |
| } // non constant |
| |
| // Scan string for start of substr in 16-byte vectors |
| bind(SCAN_TO_SUBSTR); |
| assert(cnt1 == rdx && cnt2 == rax && tmp == rcx, "pcmpestri"); |
| pcmpestri(vec, Address(result, 0), mode); |
| jccb(Assembler::below, FOUND_CANDIDATE); // CF == 1 |
| subl(cnt1, stride); |
| jccb(Assembler::lessEqual, RET_NOT_FOUND); // Scanned full string |
| cmpl(cnt1, cnt2); |
| jccb(Assembler::negative, RET_NOT_FOUND); // Left less then substring |
| addptr(result, 16); |
| |
| bind(ADJUST_STR); |
| cmpl(cnt1, stride); // Do not read beyond string |
| jccb(Assembler::greaterEqual, SCAN_TO_SUBSTR); |
| // Back-up string to avoid reading beyond string. |
| lea(result, Address(result, cnt1, scale1, -16)); |
| movl(cnt1, stride); |
| jmpb(SCAN_TO_SUBSTR); |
| |
| // Found a potential substr |
| bind(FOUND_CANDIDATE); |
| // After pcmpestri tmp(rcx) contains matched element index |
| |
| // Make sure string is still long enough |
| subl(cnt1, tmp); |
| cmpl(cnt1, cnt2); |
| jccb(Assembler::greaterEqual, FOUND_SUBSTR); |
| // Left less then substring. |
| |
| bind(RET_NOT_FOUND); |
| movl(result, -1); |
| jmp(CLEANUP); |
| |
| bind(FOUND_SUBSTR); |
| // Compute start addr of substr |
| lea(result, Address(result, tmp, scale1)); |
| if (int_cnt2 > 0) { // Constant substring |
| // Repeat search for small substring (< 8 chars) |
| // from new point without reloading substring. |
| // Have to check that we don't read beyond string. |
| cmpl(tmp, stride-int_cnt2); |
| jccb(Assembler::greater, ADJUST_STR); |
| // Fall through if matched whole substring. |
| } else { // non constant |
| assert(int_cnt2 == -1, "should be != 0"); |
| |
| addl(tmp, cnt2); |
| // Found result if we matched whole substring. |
| cmpl(tmp, stride); |
| jcc(Assembler::lessEqual, RET_FOUND); |
| |
| // Repeat search for small substring (<= 8 chars) |
| // from new point 'str1' without reloading substring. |
| cmpl(cnt2, stride); |
| // Have to check that we don't read beyond string. |
| jccb(Assembler::lessEqual, ADJUST_STR); |
| |
| Label CHECK_NEXT, CONT_SCAN_SUBSTR, RET_FOUND_LONG; |
| // Compare the rest of substring (> 8 chars). |
| movptr(str1, result); |
| |
| cmpl(tmp, cnt2); |
| // First 8 chars are already matched. |
| jccb(Assembler::equal, CHECK_NEXT); |
| |
| bind(SCAN_SUBSTR); |
| pcmpestri(vec, Address(str1, 0), mode); |
| // Need to reload strings pointers if not matched whole vector |
| jcc(Assembler::noOverflow, RELOAD_SUBSTR); // OF == 0 |
| |
| bind(CHECK_NEXT); |
| subl(cnt2, stride); |
| jccb(Assembler::lessEqual, RET_FOUND_LONG); // Found full substring |
| addptr(str1, 16); |
| if (ae == StrIntrinsicNode::UL) { |
| addptr(str2, 8); |
| } else { |
| addptr(str2, 16); |
| } |
| subl(cnt1, stride); |
| cmpl(cnt2, stride); // Do not read beyond substring |
| jccb(Assembler::greaterEqual, CONT_SCAN_SUBSTR); |
| // Back-up strings to avoid reading beyond substring. |
| |
| if (ae == StrIntrinsicNode::UL) { |
| lea(str2, Address(str2, cnt2, scale2, -8)); |
| lea(str1, Address(str1, cnt2, scale1, -16)); |
| } else { |
| lea(str2, Address(str2, cnt2, scale2, -16)); |
| lea(str1, Address(str1, cnt2, scale1, -16)); |
| } |
| subl(cnt1, cnt2); |
| movl(cnt2, stride); |
| addl(cnt1, stride); |
| bind(CONT_SCAN_SUBSTR); |
| if (ae == StrIntrinsicNode::UL) { |
| pmovzxbw(vec, Address(str2, 0)); |
| } else { |
| movdqu(vec, Address(str2, 0)); |
| } |
| jmp(SCAN_SUBSTR); |
| |
| bind(RET_FOUND_LONG); |
| movptr(str1, Address(rsp, wordSize)); |
| } // non constant |
| |
| bind(RET_FOUND); |
| // Compute substr offset |
| subptr(result, str1); |
| if (ae == StrIntrinsicNode::UU || ae == StrIntrinsicNode::UL) { |
| shrl(result, 1); // index |
| } |
| bind(CLEANUP); |
| pop(rsp); // restore SP |
| |
| } // string_indexof |
| |
| void C2_MacroAssembler::string_indexof_char(Register str1, Register cnt1, Register ch, Register result, |
| XMMRegister vec1, XMMRegister vec2, XMMRegister vec3, Register tmp) { |
| ShortBranchVerifier sbv(this); |
| assert(UseSSE42Intrinsics, "SSE4.2 intrinsics are required"); |
| |
| int stride = 8; |
| |
| Label FOUND_CHAR, SCAN_TO_CHAR, SCAN_TO_CHAR_LOOP, |
| SCAN_TO_8_CHAR, SCAN_TO_8_CHAR_LOOP, SCAN_TO_16_CHAR_LOOP, |
| RET_NOT_FOUND, SCAN_TO_8_CHAR_INIT, |
| FOUND_SEQ_CHAR, DONE_LABEL; |
| |
| movptr(result, str1); |
| if (UseAVX >= 2) { |
| cmpl(cnt1, stride); |
| jcc(Assembler::less, SCAN_TO_CHAR); |
| cmpl(cnt1, 2*stride); |
| jcc(Assembler::less, SCAN_TO_8_CHAR_INIT); |
| movdl(vec1, ch); |
| vpbroadcastw(vec1, vec1, Assembler::AVX_256bit); |
| vpxor(vec2, vec2); |
| movl(tmp, cnt1); |
| andl(tmp, 0xFFFFFFF0); //vector count (in chars) |
| andl(cnt1,0x0000000F); //tail count (in chars) |
| |
| bind(SCAN_TO_16_CHAR_LOOP); |
| vmovdqu(vec3, Address(result, 0)); |
| vpcmpeqw(vec3, vec3, vec1, 1); |
| vptest(vec2, vec3); |
| jcc(Assembler::carryClear, FOUND_CHAR); |
| addptr(result, 32); |
| subl(tmp, 2*stride); |
| jcc(Assembler::notZero, SCAN_TO_16_CHAR_LOOP); |
| jmp(SCAN_TO_8_CHAR); |
| bind(SCAN_TO_8_CHAR_INIT); |
| movdl(vec1, ch); |
| pshuflw(vec1, vec1, 0x00); |
| pshufd(vec1, vec1, 0); |
| pxor(vec2, vec2); |
| } |
| bind(SCAN_TO_8_CHAR); |
| cmpl(cnt1, stride); |
| jcc(Assembler::less, SCAN_TO_CHAR); |
| if (UseAVX < 2) { |
| movdl(vec1, ch); |
| pshuflw(vec1, vec1, 0x00); |
| pshufd(vec1, vec1, 0); |
| pxor(vec2, vec2); |
| } |
| movl(tmp, cnt1); |
| andl(tmp, 0xFFFFFFF8); //vector count (in chars) |
| andl(cnt1,0x00000007); //tail count (in chars) |
| |
| bind(SCAN_TO_8_CHAR_LOOP); |
| movdqu(vec3, Address(result, 0)); |
| pcmpeqw(vec3, vec1); |
| ptest(vec2, vec3); |
| jcc(Assembler::carryClear, FOUND_CHAR); |
| addptr(result, 16); |
| subl(tmp, stride); |
| jcc(Assembler::notZero, SCAN_TO_8_CHAR_LOOP); |
| bind(SCAN_TO_CHAR); |
| testl(cnt1, cnt1); |
| jcc(Assembler::zero, RET_NOT_FOUND); |
| bind(SCAN_TO_CHAR_LOOP); |
| load_unsigned_short(tmp, Address(result, 0)); |
| cmpl(ch, tmp); |
| jccb(Assembler::equal, FOUND_SEQ_CHAR); |
| addptr(result, 2); |
| subl(cnt1, 1); |
| jccb(Assembler::zero, RET_NOT_FOUND); |
| jmp(SCAN_TO_CHAR_LOOP); |
| |
| bind(RET_NOT_FOUND); |
| movl(result, -1); |
| jmpb(DONE_LABEL); |
| |
| bind(FOUND_CHAR); |
| if (UseAVX >= 2) { |
| vpmovmskb(tmp, vec3); |
| } else { |
| pmovmskb(tmp, vec3); |
| } |
| bsfl(ch, tmp); |
| addptr(result, ch); |
| |
| bind(FOUND_SEQ_CHAR); |
| subptr(result, str1); |
| shrl(result, 1); |
| |
| bind(DONE_LABEL); |
| } // string_indexof_char |
| |
| void C2_MacroAssembler::stringL_indexof_char(Register str1, Register cnt1, Register ch, Register result, |
| XMMRegister vec1, XMMRegister vec2, XMMRegister vec3, Register tmp) { |
| ShortBranchVerifier sbv(this); |
| assert(UseSSE42Intrinsics, "SSE4.2 intrinsics are required"); |
| |
| int stride = 16; |
| |
| Label FOUND_CHAR, SCAN_TO_CHAR_INIT, SCAN_TO_CHAR_LOOP, |
| SCAN_TO_16_CHAR, SCAN_TO_16_CHAR_LOOP, SCAN_TO_32_CHAR_LOOP, |
| RET_NOT_FOUND, SCAN_TO_16_CHAR_INIT, |
| FOUND_SEQ_CHAR, DONE_LABEL; |
| |
| movptr(result, str1); |
| if (UseAVX >= 2) { |
| cmpl(cnt1, stride); |
| jcc(Assembler::less, SCAN_TO_CHAR_INIT); |
| cmpl(cnt1, stride*2); |
| jcc(Assembler::less, SCAN_TO_16_CHAR_INIT); |
| movdl(vec1, ch); |
| vpbroadcastb(vec1, vec1, Assembler::AVX_256bit); |
| vpxor(vec2, vec2); |
| movl(tmp, cnt1); |
| andl(tmp, 0xFFFFFFE0); //vector count (in chars) |
| andl(cnt1,0x0000001F); //tail count (in chars) |
| |
| bind(SCAN_TO_32_CHAR_LOOP); |
| vmovdqu(vec3, Address(result, 0)); |
| vpcmpeqb(vec3, vec3, vec1, Assembler::AVX_256bit); |
| vptest(vec2, vec3); |
| jcc(Assembler::carryClear, FOUND_CHAR); |
| addptr(result, 32); |
| subl(tmp, stride*2); |
| jcc(Assembler::notZero, SCAN_TO_32_CHAR_LOOP); |
| jmp(SCAN_TO_16_CHAR); |
| |
| bind(SCAN_TO_16_CHAR_INIT); |
| movdl(vec1, ch); |
| pxor(vec2, vec2); |
| pshufb(vec1, vec2); |
| } |
| |
| bind(SCAN_TO_16_CHAR); |
| cmpl(cnt1, stride); |
| jcc(Assembler::less, SCAN_TO_CHAR_INIT);//less than 16 entries left |
| if (UseAVX < 2) { |
| movdl(vec1, ch); |
| pxor(vec2, vec2); |
| pshufb(vec1, vec2); |
| } |
| movl(tmp, cnt1); |
| andl(tmp, 0xFFFFFFF0); //vector count (in bytes) |
| andl(cnt1,0x0000000F); //tail count (in bytes) |
| |
| bind(SCAN_TO_16_CHAR_LOOP); |
| movdqu(vec3, Address(result, 0)); |
| pcmpeqb(vec3, vec1); |
| ptest(vec2, vec3); |
| jcc(Assembler::carryClear, FOUND_CHAR); |
| addptr(result, 16); |
| subl(tmp, stride); |
| jcc(Assembler::notZero, SCAN_TO_16_CHAR_LOOP);//last 16 items... |
| |
| bind(SCAN_TO_CHAR_INIT); |
| testl(cnt1, cnt1); |
| jcc(Assembler::zero, RET_NOT_FOUND); |
| bind(SCAN_TO_CHAR_LOOP); |
| load_unsigned_byte(tmp, Address(result, 0)); |
| cmpl(ch, tmp); |
| jccb(Assembler::equal, FOUND_SEQ_CHAR); |
| addptr(result, 1); |
| subl(cnt1, 1); |
| jccb(Assembler::zero, RET_NOT_FOUND); |
| jmp(SCAN_TO_CHAR_LOOP); |
| |
| bind(RET_NOT_FOUND); |
| movl(result, -1); |
| jmpb(DONE_LABEL); |
| |
| bind(FOUND_CHAR); |
| if (UseAVX >= 2) { |
| vpmovmskb(tmp, vec3); |
| } else { |
| pmovmskb(tmp, vec3); |
| } |
| bsfl(ch, tmp); |
| addptr(result, ch); |
| |
| bind(FOUND_SEQ_CHAR); |
| subptr(result, str1); |
| |
| bind(DONE_LABEL); |
| } // stringL_indexof_char |
| |
| int C2_MacroAssembler::arrays_hashcode_elsize(BasicType eltype) { |
| switch (eltype) { |
| case T_BOOLEAN: return sizeof(jboolean); |
| case T_BYTE: return sizeof(jbyte); |
| case T_SHORT: return sizeof(jshort); |
| case T_CHAR: return sizeof(jchar); |
| case T_INT: return sizeof(jint); |
| default: |
| ShouldNotReachHere(); |
| return -1; |
| } |
| } |
| |
| void C2_MacroAssembler::arrays_hashcode_elload(Register dst, Address src, BasicType eltype) { |
| switch (eltype) { |
| // T_BOOLEAN used as surrogate for unsigned byte |
| case T_BOOLEAN: movzbl(dst, src); break; |
| case T_BYTE: movsbl(dst, src); break; |
| case T_SHORT: movswl(dst, src); break; |
| case T_CHAR: movzwl(dst, src); break; |
| case T_INT: movl(dst, src); break; |
| default: |
| ShouldNotReachHere(); |
| } |
| } |
| |
| void C2_MacroAssembler::arrays_hashcode_elvload(XMMRegister dst, Address src, BasicType eltype) { |
| load_vector(eltype, dst, src, arrays_hashcode_elsize(eltype) * 8); |
| } |
| |
| void C2_MacroAssembler::arrays_hashcode_elvload(XMMRegister dst, AddressLiteral src, BasicType eltype) { |
| load_vector(eltype, dst, src, arrays_hashcode_elsize(eltype) * 8); |
| } |
| |
| void C2_MacroAssembler::arrays_hashcode_elvcast(XMMRegister dst, BasicType eltype) { |
| const int vlen = Assembler::AVX_256bit; |
| switch (eltype) { |
| case T_BOOLEAN: vector_unsigned_cast(dst, dst, vlen, T_BYTE, T_INT); break; |
| case T_BYTE: vector_signed_cast(dst, dst, vlen, T_BYTE, T_INT); break; |
| case T_SHORT: vector_signed_cast(dst, dst, vlen, T_SHORT, T_INT); break; |
| case T_CHAR: vector_unsigned_cast(dst, dst, vlen, T_SHORT, T_INT); break; |
| case T_INT: |
| // do nothing |
| break; |
| default: |
| ShouldNotReachHere(); |
| } |
| } |
| |
| void C2_MacroAssembler::arrays_hashcode(Register ary1, Register cnt1, Register result, |
| Register index, Register tmp2, Register tmp3, XMMRegister vnext, |
| XMMRegister vcoef0, XMMRegister vcoef1, XMMRegister vcoef2, XMMRegister vcoef3, |
| XMMRegister vresult0, XMMRegister vresult1, XMMRegister vresult2, XMMRegister vresult3, |
| XMMRegister vtmp0, XMMRegister vtmp1, XMMRegister vtmp2, XMMRegister vtmp3, |
| BasicType eltype) { |
| ShortBranchVerifier sbv(this); |
| assert(UseAVX >= 2, "AVX2 intrinsics are required"); |
| assert_different_registers(ary1, cnt1, result, index, tmp2, tmp3); |
| assert_different_registers(vnext, vcoef0, vcoef1, vcoef2, vcoef3, vresult0, vresult1, vresult2, vresult3, vtmp0, vtmp1, vtmp2, vtmp3); |
| |
| Label SHORT_UNROLLED_BEGIN, SHORT_UNROLLED_LOOP_BEGIN, |
| SHORT_UNROLLED_LOOP_EXIT, |
| UNROLLED_SCALAR_LOOP_BEGIN, UNROLLED_SCALAR_SKIP, UNROLLED_SCALAR_RESUME, |
| UNROLLED_VECTOR_LOOP_BEGIN, |
| END; |
| switch (eltype) { |
| case T_BOOLEAN: BLOCK_COMMENT("arrays_hashcode(unsigned byte) {"); break; |
| case T_CHAR: BLOCK_COMMENT("arrays_hashcode(char) {"); break; |
| case T_BYTE: BLOCK_COMMENT("arrays_hashcode(byte) {"); break; |
| case T_SHORT: BLOCK_COMMENT("arrays_hashcode(short) {"); break; |
| case T_INT: BLOCK_COMMENT("arrays_hashcode(int) {"); break; |
| default: BLOCK_COMMENT("arrays_hashcode {"); break; |
| } |
| |
| // For "renaming" for readibility of the code |
| const XMMRegister vcoef[] = { vcoef0, vcoef1, vcoef2, vcoef3 }, |
| vresult[] = { vresult0, vresult1, vresult2, vresult3 }, |
| vtmp[] = { vtmp0, vtmp1, vtmp2, vtmp3 }; |
| |
| const int elsize = arrays_hashcode_elsize(eltype); |
| |
| /* |
| if (cnt1 >= 2) { |
| if (cnt1 >= 32) { |
| UNROLLED VECTOR LOOP |
| } |
| UNROLLED SCALAR LOOP |
| } |
| SINGLE SCALAR |
| */ |
| |
| cmpl(cnt1, 32); |
| jcc(Assembler::less, SHORT_UNROLLED_BEGIN); |
| |
| // cnt1 >= 32 && generate_vectorized_loop |
| xorl(index, index); |
| |
| // vresult = IntVector.zero(I256); |
| for (int idx = 0; idx < 4; idx++) { |
| vpxor(vresult[idx], vresult[idx]); |
| } |
| // vnext = IntVector.broadcast(I256, power_of_31_backwards[0]); |
| Register bound = tmp2; |
| Register next = tmp3; |
| lea(tmp2, ExternalAddress(StubRoutines::x86::arrays_hashcode_powers_of_31() + (0 * sizeof(jint)))); |
| movl(next, Address(tmp2, 0)); |
| movdl(vnext, next); |
| vpbroadcastd(vnext, vnext, Assembler::AVX_256bit); |
| |
| // index = 0; |
| // bound = cnt1 & ~(32 - 1); |
| movl(bound, cnt1); |
| andl(bound, ~(32 - 1)); |
| // for (; index < bound; index += 32) { |
| bind(UNROLLED_VECTOR_LOOP_BEGIN); |
| // result *= next; |
| imull(result, next); |
| // loop fission to upfront the cost of fetching from memory, OOO execution |
| // can then hopefully do a better job of prefetching |
| for (int idx = 0; idx < 4; idx++) { |
| arrays_hashcode_elvload(vtmp[idx], Address(ary1, index, Address::times(elsize), 8 * idx * elsize), eltype); |
| } |
| // vresult = vresult * vnext + ary1[index+8*idx:index+8*idx+7]; |
| for (int idx = 0; idx < 4; idx++) { |
| vpmulld(vresult[idx], vresult[idx], vnext, Assembler::AVX_256bit); |
| arrays_hashcode_elvcast(vtmp[idx], eltype); |
| vpaddd(vresult[idx], vresult[idx], vtmp[idx], Assembler::AVX_256bit); |
| } |
| // index += 32; |
| addl(index, 32); |
| // index < bound; |
| cmpl(index, bound); |
| jcc(Assembler::less, UNROLLED_VECTOR_LOOP_BEGIN); |
| // } |
| |
| lea(ary1, Address(ary1, bound, Address::times(elsize))); |
| subl(cnt1, bound); |
| // release bound |
| |
| // vresult *= IntVector.fromArray(I256, power_of_31_backwards, 1); |
| for (int idx = 0; idx < 4; idx++) { |
| lea(tmp2, ExternalAddress(StubRoutines::x86::arrays_hashcode_powers_of_31() + ((8 * idx + 1) * sizeof(jint)))); |
| arrays_hashcode_elvload(vcoef[idx], Address(tmp2, 0), T_INT); |
| vpmulld(vresult[idx], vresult[idx], vcoef[idx], Assembler::AVX_256bit); |
| } |
| // result += vresult.reduceLanes(ADD); |
| for (int idx = 0; idx < 4; idx++) { |
| reduceI(Op_AddReductionVI, 256/(sizeof(jint) * 8), result, result, vresult[idx], vtmp[(idx * 2 + 0) % 4], vtmp[(idx * 2 + 1) % 4]); |
| } |
| |
| // } else if (cnt1 < 32) { |
| |
| bind(SHORT_UNROLLED_BEGIN); |
| // int i = 1; |
| movl(index, 1); |
| cmpl(index, cnt1); |
| jcc(Assembler::greaterEqual, SHORT_UNROLLED_LOOP_EXIT); |
| |
| // for (; i < cnt1 ; i += 2) { |
| bind(SHORT_UNROLLED_LOOP_BEGIN); |
| movl(tmp3, 961); |
| imull(result, tmp3); |
| arrays_hashcode_elload(tmp2, Address(ary1, index, Address::times(elsize), -elsize), eltype); |
| movl(tmp3, tmp2); |
| shll(tmp3, 5); |
| subl(tmp3, tmp2); |
| addl(result, tmp3); |
| arrays_hashcode_elload(tmp3, Address(ary1, index, Address::times(elsize)), eltype); |
| addl(result, tmp3); |
| addl(index, 2); |
| cmpl(index, cnt1); |
| jccb(Assembler::less, SHORT_UNROLLED_LOOP_BEGIN); |
| |
| // } |
| // if (i >= cnt1) { |
| bind(SHORT_UNROLLED_LOOP_EXIT); |
| jccb(Assembler::greater, END); |
| movl(tmp2, result); |
| shll(result, 5); |
| subl(result, tmp2); |
| arrays_hashcode_elload(tmp3, Address(ary1, index, Address::times(elsize), -elsize), eltype); |
| addl(result, tmp3); |
| // } |
| bind(END); |
| |
| BLOCK_COMMENT("} // arrays_hashcode"); |
| |
| } // arrays_hashcode |
| |
| // helper function for string_compare |
| void C2_MacroAssembler::load_next_elements(Register elem1, Register elem2, Register str1, Register str2, |
| Address::ScaleFactor scale, Address::ScaleFactor scale1, |
| Address::ScaleFactor scale2, Register index, int ae) { |
| if (ae == StrIntrinsicNode::LL) { |
| load_unsigned_byte(elem1, Address(str1, index, scale, 0)); |
| load_unsigned_byte(elem2, Address(str2, index, scale, 0)); |
| } else if (ae == StrIntrinsicNode::UU) { |
| load_unsigned_short(elem1, Address(str1, index, scale, 0)); |
| load_unsigned_short(elem2, Address(str2, index, scale, 0)); |
| } else { |
| load_unsigned_byte(elem1, Address(str1, index, scale1, 0)); |
| load_unsigned_short(elem2, Address(str2, index, scale2, 0)); |
| } |
| } |
| |
| // Compare strings, used for char[] and byte[]. |
| void C2_MacroAssembler::string_compare(Register str1, Register str2, |
| Register cnt1, Register cnt2, Register result, |
| XMMRegister vec1, int ae, KRegister mask) { |
| ShortBranchVerifier sbv(this); |
| Label LENGTH_DIFF_LABEL, POP_LABEL, DONE_LABEL, WHILE_HEAD_LABEL; |
| Label COMPARE_WIDE_VECTORS_LOOP_FAILED; // used only AVX3 |
| int stride, stride2, adr_stride, adr_stride1, adr_stride2; |
| int stride2x2 = 0x40; |
| Address::ScaleFactor scale = Address::no_scale; |
| Address::ScaleFactor scale1 = Address::no_scale; |
| Address::ScaleFactor scale2 = Address::no_scale; |
| |
| if (ae != StrIntrinsicNode::LL) { |
| stride2x2 = 0x20; |
| } |
| |
| if (ae == StrIntrinsicNode::LU || ae == StrIntrinsicNode::UL) { |
| shrl(cnt2, 1); |
| } |
| // Compute the minimum of the string lengths and the |
| // difference of the string lengths (stack). |
| // Do the conditional move stuff |
| movl(result, cnt1); |
| subl(cnt1, cnt2); |
| push(cnt1); |
| cmov32(Assembler::lessEqual, cnt2, result); // cnt2 = min(cnt1, cnt2) |
| |
| // Is the minimum length zero? |
| testl(cnt2, cnt2); |
| jcc(Assembler::zero, LENGTH_DIFF_LABEL); |
| if (ae == StrIntrinsicNode::LL) { |
| // Load first bytes |
| load_unsigned_byte(result, Address(str1, 0)); // result = str1[0] |
| load_unsigned_byte(cnt1, Address(str2, 0)); // cnt1 = str2[0] |
| } else if (ae == StrIntrinsicNode::UU) { |
| // Load first characters |
| load_unsigned_short(result, Address(str1, 0)); |
| load_unsigned_short(cnt1, Address(str2, 0)); |
| } else { |
| load_unsigned_byte(result, Address(str1, 0)); |
| load_unsigned_short(cnt1, Address(str2, 0)); |
| } |
| subl(result, cnt1); |
| jcc(Assembler::notZero, POP_LABEL); |
| |
| if (ae == StrIntrinsicNode::UU) { |
| // Divide length by 2 to get number of chars |
| shrl(cnt2, 1); |
| } |
| cmpl(cnt2, 1); |
| jcc(Assembler::equal, LENGTH_DIFF_LABEL); |
| |
| // Check if the strings start at the same location and setup scale and stride |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| cmpptr(str1, str2); |
| jcc(Assembler::equal, LENGTH_DIFF_LABEL); |
| if (ae == StrIntrinsicNode::LL) { |
| scale = Address::times_1; |
| stride = 16; |
| } else { |
| scale = Address::times_2; |
| stride = 8; |
| } |
| } else { |
| scale1 = Address::times_1; |
| scale2 = Address::times_2; |
| // scale not used |
| stride = 8; |
| } |
| |
| if (UseAVX >= 2 && UseSSE42Intrinsics) { |
| Label COMPARE_WIDE_VECTORS, VECTOR_NOT_EQUAL, COMPARE_WIDE_TAIL, COMPARE_SMALL_STR; |
| Label COMPARE_WIDE_VECTORS_LOOP, COMPARE_16_CHARS, COMPARE_INDEX_CHAR; |
| Label COMPARE_WIDE_VECTORS_LOOP_AVX2; |
| Label COMPARE_TAIL_LONG; |
| Label COMPARE_WIDE_VECTORS_LOOP_AVX3; // used only AVX3 |
| |
| int pcmpmask = 0x19; |
| if (ae == StrIntrinsicNode::LL) { |
| pcmpmask &= ~0x01; |
| } |
| |
| // Setup to compare 16-chars (32-bytes) vectors, |
| // start from first character again because it has aligned address. |
| if (ae == StrIntrinsicNode::LL) { |
| stride2 = 32; |
| } else { |
| stride2 = 16; |
| } |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| adr_stride = stride << scale; |
| } else { |
| adr_stride1 = 8; //stride << scale1; |
| adr_stride2 = 16; //stride << scale2; |
| } |
| |
| assert(result == rax && cnt2 == rdx && cnt1 == rcx, "pcmpestri"); |
| // rax and rdx are used by pcmpestri as elements counters |
| movl(result, cnt2); |
| andl(cnt2, ~(stride2-1)); // cnt2 holds the vector count |
| jcc(Assembler::zero, COMPARE_TAIL_LONG); |
| |
| // fast path : compare first 2 8-char vectors. |
| bind(COMPARE_16_CHARS); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| movdqu(vec1, Address(str1, 0)); |
| } else { |
| pmovzxbw(vec1, Address(str1, 0)); |
| } |
| pcmpestri(vec1, Address(str2, 0), pcmpmask); |
| jccb(Assembler::below, COMPARE_INDEX_CHAR); |
| |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| movdqu(vec1, Address(str1, adr_stride)); |
| pcmpestri(vec1, Address(str2, adr_stride), pcmpmask); |
| } else { |
| pmovzxbw(vec1, Address(str1, adr_stride1)); |
| pcmpestri(vec1, Address(str2, adr_stride2), pcmpmask); |
| } |
| jccb(Assembler::aboveEqual, COMPARE_WIDE_VECTORS); |
| addl(cnt1, stride); |
| |
| // Compare the characters at index in cnt1 |
| bind(COMPARE_INDEX_CHAR); // cnt1 has the offset of the mismatching character |
| load_next_elements(result, cnt2, str1, str2, scale, scale1, scale2, cnt1, ae); |
| subl(result, cnt2); |
| jmp(POP_LABEL); |
| |
| // Setup the registers to start vector comparison loop |
| bind(COMPARE_WIDE_VECTORS); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| lea(str1, Address(str1, result, scale)); |
| lea(str2, Address(str2, result, scale)); |
| } else { |
| lea(str1, Address(str1, result, scale1)); |
| lea(str2, Address(str2, result, scale2)); |
| } |
| subl(result, stride2); |
| subl(cnt2, stride2); |
| jcc(Assembler::zero, COMPARE_WIDE_TAIL); |
| negptr(result); |
| |
| // In a loop, compare 16-chars (32-bytes) at once using (vpxor+vptest) |
| bind(COMPARE_WIDE_VECTORS_LOOP); |
| |
| if ((AVX3Threshold == 0) && VM_Version::supports_avx512vlbw()) { // trying 64 bytes fast loop |
| cmpl(cnt2, stride2x2); |
| jccb(Assembler::below, COMPARE_WIDE_VECTORS_LOOP_AVX2); |
| testl(cnt2, stride2x2-1); // cnt2 holds the vector count |
| jccb(Assembler::notZero, COMPARE_WIDE_VECTORS_LOOP_AVX2); // means we cannot subtract by 0x40 |
| |
| bind(COMPARE_WIDE_VECTORS_LOOP_AVX3); // the hottest loop |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| evmovdquq(vec1, Address(str1, result, scale), Assembler::AVX_512bit); |
| evpcmpeqb(mask, vec1, Address(str2, result, scale), Assembler::AVX_512bit); // k7 == 11..11, if operands equal, otherwise k7 has some 0 |
| } else { |
| vpmovzxbw(vec1, Address(str1, result, scale1), Assembler::AVX_512bit); |
| evpcmpeqb(mask, vec1, Address(str2, result, scale2), Assembler::AVX_512bit); // k7 == 11..11, if operands equal, otherwise k7 has some 0 |
| } |
| kortestql(mask, mask); |
| jcc(Assembler::aboveEqual, COMPARE_WIDE_VECTORS_LOOP_FAILED); // miscompare |
| addptr(result, stride2x2); // update since we already compared at this addr |
| subl(cnt2, stride2x2); // and sub the size too |
| jccb(Assembler::notZero, COMPARE_WIDE_VECTORS_LOOP_AVX3); |
| |
| vpxor(vec1, vec1); |
| jmpb(COMPARE_WIDE_TAIL); |
| }//if (VM_Version::supports_avx512vlbw()) |
| |
| bind(COMPARE_WIDE_VECTORS_LOOP_AVX2); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| vmovdqu(vec1, Address(str1, result, scale)); |
| vpxor(vec1, Address(str2, result, scale)); |
| } else { |
| vpmovzxbw(vec1, Address(str1, result, scale1), Assembler::AVX_256bit); |
| vpxor(vec1, Address(str2, result, scale2)); |
| } |
| vptest(vec1, vec1); |
| jcc(Assembler::notZero, VECTOR_NOT_EQUAL); |
| addptr(result, stride2); |
| subl(cnt2, stride2); |
| jcc(Assembler::notZero, COMPARE_WIDE_VECTORS_LOOP); |
| // clean upper bits of YMM registers |
| vpxor(vec1, vec1); |
| |
| // compare wide vectors tail |
| bind(COMPARE_WIDE_TAIL); |
| testptr(result, result); |
| jcc(Assembler::zero, LENGTH_DIFF_LABEL); |
| |
| movl(result, stride2); |
| movl(cnt2, result); |
| negptr(result); |
| jmp(COMPARE_WIDE_VECTORS_LOOP_AVX2); |
| |
| // Identifies the mismatching (higher or lower)16-bytes in the 32-byte vectors. |
| bind(VECTOR_NOT_EQUAL); |
| // clean upper bits of YMM registers |
| vpxor(vec1, vec1); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| lea(str1, Address(str1, result, scale)); |
| lea(str2, Address(str2, result, scale)); |
| } else { |
| lea(str1, Address(str1, result, scale1)); |
| lea(str2, Address(str2, result, scale2)); |
| } |
| jmp(COMPARE_16_CHARS); |
| |
| // Compare tail chars, length between 1 to 15 chars |
| bind(COMPARE_TAIL_LONG); |
| movl(cnt2, result); |
| cmpl(cnt2, stride); |
| jcc(Assembler::less, COMPARE_SMALL_STR); |
| |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| movdqu(vec1, Address(str1, 0)); |
| } else { |
| pmovzxbw(vec1, Address(str1, 0)); |
| } |
| pcmpestri(vec1, Address(str2, 0), pcmpmask); |
| jcc(Assembler::below, COMPARE_INDEX_CHAR); |
| subptr(cnt2, stride); |
| jcc(Assembler::zero, LENGTH_DIFF_LABEL); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| lea(str1, Address(str1, result, scale)); |
| lea(str2, Address(str2, result, scale)); |
| } else { |
| lea(str1, Address(str1, result, scale1)); |
| lea(str2, Address(str2, result, scale2)); |
| } |
| negptr(cnt2); |
| jmpb(WHILE_HEAD_LABEL); |
| |
| bind(COMPARE_SMALL_STR); |
| } else if (UseSSE42Intrinsics) { |
| Label COMPARE_WIDE_VECTORS, VECTOR_NOT_EQUAL, COMPARE_TAIL; |
| int pcmpmask = 0x19; |
| // Setup to compare 8-char (16-byte) vectors, |
| // start from first character again because it has aligned address. |
| movl(result, cnt2); |
| andl(cnt2, ~(stride - 1)); // cnt2 holds the vector count |
| if (ae == StrIntrinsicNode::LL) { |
| pcmpmask &= ~0x01; |
| } |
| jcc(Assembler::zero, COMPARE_TAIL); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| lea(str1, Address(str1, result, scale)); |
| lea(str2, Address(str2, result, scale)); |
| } else { |
| lea(str1, Address(str1, result, scale1)); |
| lea(str2, Address(str2, result, scale2)); |
| } |
| negptr(result); |
| |
| // pcmpestri |
| // inputs: |
| // vec1- substring |
| // rax - negative string length (elements count) |
| // mem - scanned string |
| // rdx - string length (elements count) |
| // pcmpmask - cmp mode: 11000 (string compare with negated result) |
| // + 00 (unsigned bytes) or + 01 (unsigned shorts) |
| // outputs: |
| // rcx - first mismatched element index |
| assert(result == rax && cnt2 == rdx && cnt1 == rcx, "pcmpestri"); |
| |
| bind(COMPARE_WIDE_VECTORS); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| movdqu(vec1, Address(str1, result, scale)); |
| pcmpestri(vec1, Address(str2, result, scale), pcmpmask); |
| } else { |
| pmovzxbw(vec1, Address(str1, result, scale1)); |
| pcmpestri(vec1, Address(str2, result, scale2), pcmpmask); |
| } |
| // After pcmpestri cnt1(rcx) contains mismatched element index |
| |
| jccb(Assembler::below, VECTOR_NOT_EQUAL); // CF==1 |
| addptr(result, stride); |
| subptr(cnt2, stride); |
| jccb(Assembler::notZero, COMPARE_WIDE_VECTORS); |
| |
| // compare wide vectors tail |
| testptr(result, result); |
| jcc(Assembler::zero, LENGTH_DIFF_LABEL); |
| |
| movl(cnt2, stride); |
| movl(result, stride); |
| negptr(result); |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| movdqu(vec1, Address(str1, result, scale)); |
| pcmpestri(vec1, Address(str2, result, scale), pcmpmask); |
| } else { |
| pmovzxbw(vec1, Address(str1, result, scale1)); |
| pcmpestri(vec1, Address(str2, result, scale2), pcmpmask); |
| } |
| jccb(Assembler::aboveEqual, LENGTH_DIFF_LABEL); |
| |
| // Mismatched characters in the vectors |
| bind(VECTOR_NOT_EQUAL); |
| addptr(cnt1, result); |
| load_next_elements(result, cnt2, str1, str2, scale, scale1, scale2, cnt1, ae); |
| subl(result, cnt2); |
| jmpb(POP_LABEL); |
| |
| bind(COMPARE_TAIL); // limit is zero |
| movl(cnt2, result); |
| // Fallthru to tail compare |
| } |
| // Shift str2 and str1 to the end of the arrays, negate min |
| if (ae == StrIntrinsicNode::LL || ae == StrIntrinsicNode::UU) { |
| lea(str1, Address(str1, cnt2, scale)); |
| lea(str2, Address(str2, cnt2, scale)); |
| } else { |
| lea(str1, Address(str1, cnt2, scale1)); |
| lea(str2, Address(str2, cnt2, scale2)); |
| } |
| decrementl(cnt2); // first character was compared already |
| negptr(cnt2); |
| |
| // Compare the rest of the elements |
| bind(WHILE_HEAD_LABEL); |
| load_next_elements(result, cnt1, str1, str2, scale, scale1, scale2, cnt2, ae); |
| subl(result, cnt1); |
| jccb(Assembler::notZero, POP_LABEL); |
| increment(cnt2); |
| jccb(Assembler::notZero, WHILE_HEAD_LABEL); |
| |
| // Strings are equal up to min length. Return the length difference. |
| bind(LENGTH_DIFF_LABEL); |
| pop(result); |
| if (ae == StrIntrinsicNode::UU) { |
| // Divide diff by 2 to get number of chars |
| sarl(result, 1); |
| } |
| jmpb(DONE_LABEL); |
| |
| if (VM_Version::supports_avx512vlbw()) { |
| |
| bind(COMPARE_WIDE_VECTORS_LOOP_FAILED); |
| |
| kmovql(cnt1, mask); |
| notq(cnt1); |
| bsfq(cnt2, cnt1); |
| if (ae != StrIntrinsicNode::LL) { |
| // Divide diff by 2 to get number of chars |
| sarl(cnt2, 1); |
| } |
| addq(result, cnt2); |
| if (ae == StrIntrinsicNode::LL) { |
| load_unsigned_byte(cnt1, Address(str2, result)); |
| load_unsigned_byte(result, Address(str1, result)); |
| } else if (ae == StrIntrinsicNode::UU) { |
| load_unsigned_short(cnt1, Address(str2, result, scale)); |
| load_unsigned_short(result, Address(str1, result, scale)); |
| } else { |
| load_unsigned_short(cnt1, Address(str2, result, scale2)); |
| load_unsigned_byte(result, Address(str1, result, scale1)); |
| } |
| subl(result, cnt1); |
| jmpb(POP_LABEL); |
| }//if (VM_Version::supports_avx512vlbw()) |
| |
| // Discard the stored length difference |
| bind(POP_LABEL); |
| pop(cnt1); |
| |
| // That's it |
| bind(DONE_LABEL); |
| if(ae == StrIntrinsicNode::UL) { |
| negl(result); |
| } |
| |
| } |
| |
| // Search for Non-ASCII character (Negative byte value) in a byte array, |
| // return the index of the first such character, otherwise the length |
| // of the array segment searched. |
| // ..\jdk\src\java.base\share\classes\java\lang\StringCoding.java |
| // @IntrinsicCandidate |
| // public static int countPositives(byte[] ba, int off, int len) { |
| // for (int i = off; i < off + len; i++) { |
| // if (ba[i] < 0) { |
| // return i - off; |
| // } |
| // } |
| // return len; |
| // } |
| void C2_MacroAssembler::count_positives(Register ary1, Register len, |
| Register result, Register tmp1, |
| XMMRegister vec1, XMMRegister vec2, KRegister mask1, KRegister mask2) { |
| // rsi: byte array |
| // rcx: len |
| // rax: result |
| ShortBranchVerifier sbv(this); |
| assert_different_registers(ary1, len, result, tmp1); |
| assert_different_registers(vec1, vec2); |
| Label ADJUST, TAIL_ADJUST, DONE, TAIL_START, CHAR_ADJUST, COMPARE_CHAR, COMPARE_VECTORS, COMPARE_BYTE; |
| |
| movl(result, len); // copy |
| // len == 0 |
| testl(len, len); |
| jcc(Assembler::zero, DONE); |
| |
| if ((AVX3Threshold == 0) && (UseAVX > 2) && // AVX512 |
| VM_Version::supports_avx512vlbw() && |
| VM_Version::supports_bmi2()) { |
| |
| Label test_64_loop, test_tail, BREAK_LOOP; |
| movl(tmp1, len); |
| vpxor(vec2, vec2, vec2, Assembler::AVX_512bit); |
| |
| andl(tmp1, 0x0000003f); // tail count (in chars) 0x3F |
| andl(len, 0xffffffc0); // vector count (in chars) |
| jccb(Assembler::zero, test_tail); |
| |
| lea(ary1, Address(ary1, len, Address::times_1)); |
| negptr(len); |
| |
| bind(test_64_loop); |
| // Check whether our 64 elements of size byte contain negatives |
| evpcmpgtb(mask1, vec2, Address(ary1, len, Address::times_1), Assembler::AVX_512bit); |
| kortestql(mask1, mask1); |
| jcc(Assembler::notZero, BREAK_LOOP); |
| |
| addptr(len, 64); |
| jccb(Assembler::notZero, test_64_loop); |
| |
| bind(test_tail); |
| // bail out when there is nothing to be done |
| testl(tmp1, -1); |
| jcc(Assembler::zero, DONE); |
| |
| |
| // check the tail for absense of negatives |
| // ~(~0 << len) applied up to two times (for 32-bit scenario) |
| { |
| Register tmp3_aliased = len; |
| mov64(tmp3_aliased, 0xFFFFFFFFFFFFFFFF); |
| shlxq(tmp3_aliased, tmp3_aliased, tmp1); |
| notq(tmp3_aliased); |
| kmovql(mask2, tmp3_aliased); |
| } |
| |
| evpcmpgtb(mask1, mask2, vec2, Address(ary1, 0), Assembler::AVX_512bit); |
| ktestq(mask1, mask2); |
| jcc(Assembler::zero, DONE); |
| |
| // do a full check for negative registers in the tail |
| movl(len, tmp1); // tmp1 holds low 6-bit from original len; |
| // ary1 already pointing to the right place |
| jmpb(TAIL_START); |
| |
| bind(BREAK_LOOP); |
| // At least one byte in the last 64 byte block was negative. |
| // Set up to look at the last 64 bytes as if they were a tail |
| lea(ary1, Address(ary1, len, Address::times_1)); |
| addptr(result, len); |
| // Ignore the very last byte: if all others are positive, |
| // it must be negative, so we can skip right to the 2+1 byte |
| // end comparison at this point |
| orl(result, 63); |
| movl(len, 63); |
| // Fallthru to tail compare |
| } else { |
| |
| if (UseAVX >= 2) { |
| // With AVX2, use 32-byte vector compare |
| Label COMPARE_WIDE_VECTORS, BREAK_LOOP; |
| |
| // Compare 32-byte vectors |
| testl(len, 0xffffffe0); // vector count (in bytes) |
| jccb(Assembler::zero, TAIL_START); |
| |
| andl(len, 0xffffffe0); |
| lea(ary1, Address(ary1, len, Address::times_1)); |
| negptr(len); |
| |
| movl(tmp1, 0x80808080); // create mask to test for Unicode chars in vector |
| movdl(vec2, tmp1); |
| vpbroadcastd(vec2, vec2, Assembler::AVX_256bit); |
| |
| bind(COMPARE_WIDE_VECTORS); |
| vmovdqu(vec1, Address(ary1, len, Address::times_1)); |
| vptest(vec1, vec2); |
| jccb(Assembler::notZero, BREAK_LOOP); |
| addptr(len, 32); |
| jccb(Assembler::notZero, COMPARE_WIDE_VECTORS); |
| |
| testl(result, 0x0000001f); // any bytes remaining? |
| jcc(Assembler::zero, DONE); |
| |
| // Quick test using the already prepared vector mask |
| movl(len, result); |
| andl(len, 0x0000001f); |
| vmovdqu(vec1, Address(ary1, len, Address::times_1, -32)); |
| vptest(vec1, vec2); |
| jcc(Assembler::zero, DONE); |
| // There are zeros, jump to the tail to determine exactly where |
| jmpb(TAIL_START); |
| |
| bind(BREAK_LOOP); |
| // At least one byte in the last 32-byte vector is negative. |
| // Set up to look at the last 32 bytes as if they were a tail |
| lea(ary1, Address(ary1, len, Address::times_1)); |
| addptr(result, len); |
| // Ignore the very last byte: if all others are positive, |
| // it must be negative, so we can skip right to the 2+1 byte |
| // end comparison at this point |
| orl(result, 31); |
| movl(len, 31); |
| // Fallthru to tail compare |
| } else if (UseSSE42Intrinsics) { |
| // With SSE4.2, use double quad vector compare |
| Label COMPARE_WIDE_VECTORS, BREAK_LOOP; |
| |
| // Compare 16-byte vectors |
| testl(len, 0xfffffff0); // vector count (in bytes) |
| jcc(Assembler::zero, TAIL_START); |
| |
| andl(len, 0xfffffff0); |
| lea(ary1, Address(ary1, len, Address::times_1)); |
| negptr(len); |
| |
| movl(tmp1, 0x80808080); |
| movdl(vec2, tmp1); |
| pshufd(vec2, vec2, 0); |
| |
| bind(COMPARE_WIDE_VECTORS); |
| movdqu(vec1, Address(ary1, len, Address::times_1)); |
| ptest(vec1, vec2); |
| jccb(Assembler::notZero, BREAK_LOOP); |
| addptr(len, 16); |
| jccb(Assembler::notZero, COMPARE_WIDE_VECTORS); |
| |
| testl(result, 0x0000000f); // len is zero, any bytes remaining? |
| jcc(Assembler::zero, DONE); |
| |
| // Quick test using the already prepared vector mask |
| movl(len, result); |
| andl(len, 0x0000000f); // tail count (in bytes) |
| movdqu(vec1, Address(ary1, len, Address::times_1, -16)); |
| ptest(vec1, vec2); |
| jcc(Assembler::zero, DONE); |
| jmpb(TAIL_START); |
| |
| bind(BREAK_LOOP); |
| // At least one byte in the last 16-byte vector is negative. |
| // Set up and look at the last 16 bytes as if they were a tail |
| lea(ary1, Address(ary1, len, Address::times_1)); |
| addptr(result, len); |
| // Ignore the very last byte: if all others are positive, |
| // it must be negative, so we can skip right to the 2+1 byte |
| // end comparison at this point |
| orl(result, 15); |
| movl(len, 15); |
| // Fallthru to tail compare |
| } |
| } |
| |
| bind(TAIL_START); |
| // Compare 4-byte vectors |
| andl(len, 0xfffffffc); // vector count (in bytes) |
| jccb(Assembler::zero, COMPARE_CHAR); |
| |
| lea(ary1, Address(ary1, len, Address::times_1)); |
| negptr(len); |
| |
| bind(COMPARE_VECTORS); |
| movl(tmp1, Address(ary1, len, Address::times_1)); |
| andl(tmp1, 0x80808080); |
| jccb(Assembler::notZero, TAIL_ADJUST); |
| addptr(len, 4); |
| jccb(Assembler::notZero, COMPARE_VECTORS); |
| |
| // Compare trailing char (final 2-3 bytes), if any |
| bind(COMPARE_CHAR); |
| |
| testl(result, 0x2); // tail char |
| jccb(Assembler::zero, COMPARE_BYTE); |
| load_unsigned_short(tmp1, Address(ary1, 0)); |
| andl(tmp1, 0x00008080); |
| jccb(Assembler::notZero, CHAR_ADJUST); |
| lea(ary1, Address(ary1, 2)); |
| |
| bind(COMPARE_BYTE); |
| testl(result, 0x1); // tail byte |
| jccb(Assembler::zero, DONE); |
| load_unsigned_byte(tmp1, Address(ary1, 0)); |
| testl(tmp1, 0x00000080); |
| jccb(Assembler::zero, DONE); |
| subptr(result, 1); |
| jmpb(DONE); |
| |
| bind(TAIL_ADJUST); |
| // there are negative bits in the last 4 byte block. |
| // Adjust result and check the next three bytes |
| addptr(result, len); |
| orl(result, 3); |
| lea(ary1, Address(ary1, len, Address::times_1)); |
| jmpb(COMPARE_CHAR); |
| |
| bind(CHAR_ADJUST); |
| // We are looking at a char + optional byte tail, and found that one |
| // of the bytes in the char is negative. Adjust the result, check the |
| // first byte and readjust if needed. |
| andl(result, 0xfffffffc); |
| testl(tmp1, 0x00000080); // little-endian, so lowest byte comes first |
| jccb(Assembler::notZero, DONE); |
| addptr(result, 1); |
| |
| // That's it |
| bind(DONE); |
| if (UseAVX >= 2) { |
| // clean upper bits of YMM registers |
| vpxor(vec1, vec1); |
| vpxor(vec2, vec2); |
| } |
| } |
| |
| // Compare char[] or byte[] arrays aligned to 4 bytes or substrings. |
| void C2_MacroAssembler::arrays_equals(bool is_array_equ, Register ary1, Register ary2, |
| Register limit, Register result, Register chr, |
| XMMRegister vec1, XMMRegister vec2, bool is_char, |
| KRegister mask, bool expand_ary2) { |
| // for expand_ary2, limit is the (smaller) size of the second array. |
| ShortBranchVerifier sbv(this); |
| Label TRUE_LABEL, FALSE_LABEL, DONE, COMPARE_VECTORS, COMPARE_CHAR, COMPARE_BYTE; |
| |
| assert((!expand_ary2) || ((expand_ary2) && (UseAVX == 2)), |
| "Expansion only implemented for AVX2"); |
| |
| int length_offset = arrayOopDesc::length_offset_in_bytes(); |
| int base_offset = arrayOopDesc::base_offset_in_bytes(is_char ? T_CHAR : T_BYTE); |
| |
| Address::ScaleFactor scaleFactor = expand_ary2 ? Address::times_2 : Address::times_1; |
| int scaleIncr = expand_ary2 ? 8 : 16; |
| |
| if (is_array_equ) { |
| // Check the input args |
| cmpoop(ary1, ary2); |
| jcc(Assembler::equal, TRUE_LABEL); |
| |
| // Need additional checks for arrays_equals. |
| testptr(ary1, ary1); |
| jcc(Assembler::zero, FALSE_LABEL); |
| testptr(ary2, ary2); |
| jcc(Assembler::zero, FALSE_LABEL); |
| |
| // Check the lengths |
| movl(limit, Address(ary1, length_offset)); |
| cmpl(limit, Address(ary2, length_offset)); |
| jcc(Assembler::notEqual, FALSE_LABEL); |
| } |
| |
| // count == 0 |
| testl(limit, limit); |
| jcc(Assembler::zero, TRUE_LABEL); |
| |
| if (is_array_equ) { |
| // Load array address |
| lea(ary1, Address(ary1, base_offset)); |
| lea(ary2, Address(ary2, base_offset)); |
| } |
| |
| if (is_array_equ && is_char) { |
| // arrays_equals when used for char[]. |
| shll(limit, 1); // byte count != 0 |
| } |
| movl(result, limit); // copy |
| |
| if (UseAVX >= 2) { |
| // With AVX2, use 32-byte vector compare |
| Label COMPARE_WIDE_VECTORS, COMPARE_WIDE_VECTORS_16, COMPARE_TAIL, COMPARE_TAIL_16; |
| |
| // Compare 32-byte vectors |
| if (expand_ary2) { |
| andl(result, 0x0000000f); // tail count (in bytes) |
| andl(limit, 0xfffffff0); // vector count (in bytes) |
| jcc(Assembler::zero, COMPARE_TAIL); |
| } else { |
| andl(result, 0x0000001f); // tail count (in bytes) |
| andl(limit, 0xffffffe0); // vector count (in bytes) |
| jcc(Assembler::zero, COMPARE_TAIL_16); |
| } |
| |
| lea(ary1, Address(ary1, limit, scaleFactor)); |
| lea(ary2, Address(ary2, limit, Address::times_1)); |
| negptr(limit); |
| |
| if ((AVX3Threshold == 0) && VM_Version::supports_avx512vlbw()) { // trying 64 bytes fast loop |
| Label COMPARE_WIDE_VECTORS_LOOP_AVX2, COMPARE_WIDE_VECTORS_LOOP_AVX3; |
| |
| cmpl(limit, -64); |
| jcc(Assembler::greater, COMPARE_WIDE_VECTORS_LOOP_AVX2); |
| |
| bind(COMPARE_WIDE_VECTORS_LOOP_AVX3); // the hottest loop |
| |
| evmovdquq(vec1, Address(ary1, limit, Address::times_1), Assembler::AVX_512bit); |
| evpcmpeqb(mask, vec1, Address(ary2, limit, Address::times_1), Assembler::AVX_512bit); |
| kortestql(mask, mask); |
| jcc(Assembler::aboveEqual, FALSE_LABEL); // miscompare |
| addptr(limit, 64); // update since we already compared at this addr |
| cmpl(limit, -64); |
| jccb(Assembler::lessEqual, COMPARE_WIDE_VECTORS_LOOP_AVX3); |
| |
| // At this point we may still need to compare -limit+result bytes. |
| // We could execute the next two instruction and just continue via non-wide path: |
| // cmpl(limit, 0); |
| // jcc(Assembler::equal, COMPARE_TAIL); // true |
| // But since we stopped at the points ary{1,2}+limit which are |
| // not farther than 64 bytes from the ends of arrays ary{1,2}+result |
| // (|limit| <= 32 and result < 32), |
| // we may just compare the last 64 bytes. |
| // |
| addptr(result, -64); // it is safe, bc we just came from this area |
| evmovdquq(vec1, Address(ary1, result, Address::times_1), Assembler::AVX_512bit); |
| evpcmpeqb(mask, vec1, Address(ary2, result, Address::times_1), Assembler::AVX_512bit); |
| kortestql(mask, mask); |
| jcc(Assembler::aboveEqual, FALSE_LABEL); // miscompare |
| |
| jmp(TRUE_LABEL); |
| |
| bind(COMPARE_WIDE_VECTORS_LOOP_AVX2); |
| |
| }//if (VM_Version::supports_avx512vlbw()) |
| |
| bind(COMPARE_WIDE_VECTORS); |
| vmovdqu(vec1, Address(ary1, limit, scaleFactor)); |
| if (expand_ary2) { |
| vpmovzxbw(vec2, Address(ary2, limit, Address::times_1), Assembler::AVX_256bit); |
| } else { |
| vmovdqu(vec2, Address(ary2, limit, Address::times_1)); |
| } |
| vpxor(vec1, vec2); |
| |
| vptest(vec1, vec1); |
| jcc(Assembler::notZero, FALSE_LABEL); |
| addptr(limit, scaleIncr * 2); |
| jcc(Assembler::notZero, COMPARE_WIDE_VECTORS); |
| |
| testl(result, result); |
| jcc(Assembler::zero, TRUE_LABEL); |
| |
| vmovdqu(vec1, Address(ary1, result, scaleFactor, -32)); |
| if (expand_ary2) { |
| vpmovzxbw(vec2, Address(ary2, result, Address::times_1, -16), Assembler::AVX_256bit); |
| } else { |
| vmovdqu(vec2, Address(ary2, result, Address::times_1, -32)); |
| } |
| vpxor(vec1, vec2); |
| |
| vptest(vec1, vec1); |
| jcc(Assembler::notZero, FALSE_LABEL); |
| jmp(TRUE_LABEL); |
| |
| bind(COMPARE_TAIL_16); // limit is zero |
| movl(limit, result); |
| |
| // Compare 16-byte chunks |
| andl(result, 0x0000000f); // tail count (in bytes) |
| andl(limit, 0xfffffff0); // vector count (in bytes) |
| jcc(Assembler::zero, COMPARE_TAIL); |
| |
| lea(ary1, Address(ary1, limit, scaleFactor)); |
| lea(ary2, Address(ary2, limit, Address::times_1)); |
| negptr(limit); |
| |
| bind(COMPARE_WIDE_VECTORS_16); |
| movdqu(vec1, Address(ary1, limit, scaleFactor)); |
| if (expand_ary2) { |
| vpmovzxbw(vec2, Address(ary2, limit, Address::times_1), Assembler::AVX_128bit); |
| } else { |
| movdqu(vec2, Address(ary2, limit, Address::times_1)); |
| } |
| pxor(vec1, vec2); |
| |
| ptest(vec1, vec1); |
| jcc(Assembler::notZero, FALSE_LABEL); |
| addptr(limit, scaleIncr); |
| jcc(Assembler::notZero, COMPARE_WIDE_VECTORS_16); |
| |
| bind(COMPARE_TAIL); // limit is zero |
| movl(limit, result); |
| // Fallthru to tail compare |
| } else if (UseSSE42Intrinsics) { |
| // With SSE4.2, use double quad vector compare |
| Label COMPARE_WIDE_VECTORS, COMPARE_TAIL; |
| |
| // Compare 16-byte vectors |
| andl(result, 0x0000000f); // tail count (in bytes) |
| andl(limit, 0xfffffff0); // vector count (in bytes) |
| jcc(Assembler::zero, COMPARE_TAIL); |
| |
| lea(ary1, Address(ary1, limit, Address::times_1)); |
| lea(ary2, Address(ary2, limit, Address::times_1)); |
| negptr(limit); |
| |
| bind(COMPARE_WIDE_VECTORS); |
| movdqu(vec1, Address(ary1, limit, Address::times_1)); |
| movdqu(vec2, Address(ary2, limit, Address::times_1)); |
| pxor(vec1, vec2); |
| |
| ptest(vec1, vec1); |
| jcc(Assembler::notZero, FALSE_LABEL); |
| addptr(limit, 16); |
| jcc(Assembler::notZero, COMPARE_WIDE_VECTORS); |
| |
| testl(result, result); |
| jcc(Assembler::zero, TRUE_LABEL); |
| |
| movdqu(vec1, Address(ary1, result, Address::times_1, -16)); |
| movdqu(vec2, Address(ary2, result, Address::times_1, -16)); |
| pxor(vec1, vec2); |
| |
| ptest(vec1, vec1); |
| jccb(Assembler::notZero, FALSE_LABEL); |
| jmpb(TRUE_LABEL); |
| |
| bind(COMPARE_TAIL); // limit is zero |
| movl(limit, result); |
| // Fallthru to tail compare |
| } |
| |
| // Compare 4-byte vectors |
| if (expand_ary2) { |
| testl(result, result); |
| jccb(Assembler::zero, TRUE_LABEL); |
| } else { |
| andl(limit, 0xfffffffc); // vector count (in bytes) |
| jccb(Assembler::zero, COMPARE_CHAR); |
| } |
| |
| lea(ary1, Address(ary1, limit, scaleFactor)); |
| lea(ary2, Address(ary2, limit, Address::times_1)); |
| negptr(limit); |
| |
| bind(COMPARE_VECTORS); |
| if (expand_ary2) { |
| // There are no "vector" operations for bytes to shorts |
| movzbl(chr, Address(ary2, limit, Address::times_1)); |
| cmpw(Address(ary1, limit, Address::times_2), chr); |
| jccb(Assembler::notEqual, FALSE_LABEL); |
| addptr(limit, 1); |
| jcc(Assembler::notZero, COMPARE_VECTORS); |
| jmp(TRUE_LABEL); |
| } else { |
| movl(chr, Address(ary1, limit, Address::times_1)); |
| cmpl(chr, Address(ary2, limit, Address::times_1)); |
| jccb(Assembler::notEqual, FALSE_LABEL); |
| addptr(limit, 4); |
| jcc(Assembler::notZero, COMPARE_VECTORS); |
| } |
| |
| // Compare trailing char (final 2 bytes), if any |
| bind(COMPARE_CHAR); |
| testl(result, 0x2); // tail char |
| jccb(Assembler::zero, COMPARE_BYTE); |
| load_unsigned_short(chr, Address(ary1, 0)); |
| load_unsigned_short(limit, Address(ary2, 0)); |
| cmpl(chr, limit); |
| jccb(Assembler::notEqual, FALSE_LABEL); |
| |
| if (is_array_equ && is_char) { |
| bind(COMPARE_BYTE); |
| } else { |
| lea(ary1, Address(ary1, 2)); |
| lea(ary2, Address(ary2, 2)); |
| |
| bind(COMPARE_BYTE); |
| testl(result, 0x1); // tail byte |
| jccb(Assembler::zero, TRUE_LABEL); |
| load_unsigned_byte(chr, Address(ary1, 0)); |
| load_unsigned_byte(limit, Address(ary2, 0)); |
| cmpl(chr, limit); |
| jccb(Assembler::notEqual, FALSE_LABEL); |
| } |
| bind(TRUE_LABEL); |
| movl(result, 1); // return true |
| jmpb(DONE); |
| |
| bind(FALSE_LABEL); |
| xorl(result, result); // return false |
| |
| // That's it |
| bind(DONE); |
| if (UseAVX >= 2) { |
| // clean upper bits of YMM registers |
| vpxor(vec1, vec1); |
| vpxor(vec2, vec2); |
| } |
| } |
| |
| static void convertF2I_slowpath(C2_MacroAssembler& masm, C2GeneralStub<Register, XMMRegister, address>& stub) { |
| #define __ masm. |
| Register dst = stub.data<0>(); |
| XMMRegister src = stub.data<1>(); |
| address target = stub.data<2>(); |
| __ bind(stub.entry()); |
| __ subptr(rsp, 8); |
| __ movdbl(Address(rsp), src); |
| __ call(RuntimeAddress(target)); |
| // APX REX2 encoding for pop(dst) increases the stub size by 1 byte. |
| __ pop(dst); |
| __ jmp(stub.continuation()); |
| #undef __ |
| } |
| |
| void C2_MacroAssembler::convertF2I(BasicType dst_bt, BasicType src_bt, Register dst, XMMRegister src) { |
| assert(dst_bt == T_INT || dst_bt == T_LONG, ""); |
| assert(src_bt == T_FLOAT || src_bt == T_DOUBLE, ""); |
| |
| address slowpath_target; |
| if (dst_bt == T_INT) { |
| if (src_bt == T_FLOAT) { |
| cvttss2sil(dst, src); |
| cmpl(dst, 0x80000000); |
| slowpath_target = StubRoutines::x86::f2i_fixup(); |
| } else { |
| cvttsd2sil(dst, src); |
| cmpl(dst, 0x80000000); |
| slowpath_target = StubRoutines::x86::d2i_fixup(); |
| } |
| } else { |
| if (src_bt == T_FLOAT) { |
| cvttss2siq(dst, src); |
| cmp64(dst, ExternalAddress(StubRoutines::x86::double_sign_flip())); |
| slowpath_target = StubRoutines::x86::f2l_fixup(); |
| } else { |
| cvttsd2siq(dst, src); |
| cmp64(dst, ExternalAddress(StubRoutines::x86::double_sign_flip())); |
| slowpath_target = StubRoutines::x86::d2l_fixup(); |
| } |
| } |
| |
| // Using the APX extended general purpose registers increases the instruction encoding size by 1 byte. |
| int max_size = 23 + (UseAPX ? 1 : 0); |
| auto stub = C2CodeStub::make<Register, XMMRegister, address>(dst, src, slowpath_target, max_size, convertF2I_slowpath); |
| jcc(Assembler::equal, stub->entry()); |
| bind(stub->continuation()); |
| } |
| |
| void C2_MacroAssembler::evmasked_op(int ideal_opc, BasicType eType, KRegister mask, XMMRegister dst, |
| XMMRegister src1, int imm8, bool merge, int vlen_enc) { |
| switch(ideal_opc) { |
| case Op_LShiftVS: |
| Assembler::evpsllw(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_LShiftVI: |
| Assembler::evpslld(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_LShiftVL: |
| Assembler::evpsllq(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_RShiftVS: |
| Assembler::evpsraw(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_RShiftVI: |
| Assembler::evpsrad(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_RShiftVL: |
| Assembler::evpsraq(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_URShiftVS: |
| Assembler::evpsrlw(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_URShiftVI: |
| Assembler::evpsrld(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_URShiftVL: |
| Assembler::evpsrlq(dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_RotateRightV: |
| evrord(eType, dst, mask, src1, imm8, merge, vlen_enc); break; |
| case Op_RotateLeftV: |
| evrold(eType, dst, mask, src1, imm8, merge, vlen_enc); break; |
| default: |
| fatal("Unsupported operation %s", NodeClassNames[ideal_opc]); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evmasked_saturating_op(int ideal_opc, BasicType elem_bt, KRegister mask, XMMRegister dst, XMMRegister src1, |
| XMMRegister src2, bool is_unsigned, bool merge, int vlen_enc) { |
| if (is_unsigned) { |
| evmasked_saturating_unsigned_op(ideal_opc, elem_bt, mask, dst, src1, src2, merge, vlen_enc); |
| } else { |
| evmasked_saturating_signed_op(ideal_opc, elem_bt, mask, dst, src1, src2, merge, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::evmasked_saturating_signed_op(int ideal_opc, BasicType elem_bt, KRegister mask, XMMRegister dst, |
| XMMRegister src1, XMMRegister src2, bool merge, int vlen_enc) { |
| switch (elem_bt) { |
| case T_BYTE: |
| if (ideal_opc == Op_SaturatingAddV) { |
| evpaddsb(dst, mask, src1, src2, merge, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| evpsubsb(dst, mask, src1, src2, merge, vlen_enc); |
| } |
| break; |
| case T_SHORT: |
| if (ideal_opc == Op_SaturatingAddV) { |
| evpaddsw(dst, mask, src1, src2, merge, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| evpsubsw(dst, mask, src1, src2, merge, vlen_enc); |
| } |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evmasked_saturating_unsigned_op(int ideal_opc, BasicType elem_bt, KRegister mask, XMMRegister dst, |
| XMMRegister src1, XMMRegister src2, bool merge, int vlen_enc) { |
| switch (elem_bt) { |
| case T_BYTE: |
| if (ideal_opc == Op_SaturatingAddV) { |
| evpaddusb(dst, mask, src1, src2, merge, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| evpsubusb(dst, mask, src1, src2, merge, vlen_enc); |
| } |
| break; |
| case T_SHORT: |
| if (ideal_opc == Op_SaturatingAddV) { |
| evpaddusw(dst, mask, src1, src2, merge, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| evpsubusw(dst, mask, src1, src2, merge, vlen_enc); |
| } |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evmasked_saturating_op(int ideal_opc, BasicType elem_bt, KRegister mask, XMMRegister dst, XMMRegister src1, |
| Address src2, bool is_unsigned, bool merge, int vlen_enc) { |
| if (is_unsigned) { |
| evmasked_saturating_unsigned_op(ideal_opc, elem_bt, mask, dst, src1, src2, merge, vlen_enc); |
| } else { |
| evmasked_saturating_signed_op(ideal_opc, elem_bt, mask, dst, src1, src2, merge, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::evmasked_saturating_signed_op(int ideal_opc, BasicType elem_bt, KRegister mask, XMMRegister dst, |
| XMMRegister src1, Address src2, bool merge, int vlen_enc) { |
| switch (elem_bt) { |
| case T_BYTE: |
| if (ideal_opc == Op_SaturatingAddV) { |
| evpaddsb(dst, mask, src1, src2, merge, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| evpsubsb(dst, mask, src1, src2, merge, vlen_enc); |
| } |
| break; |
| case T_SHORT: |
| if (ideal_opc == Op_SaturatingAddV) { |
| evpaddsw(dst, mask, src1, src2, merge, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| evpsubsw(dst, mask, src1, src2, merge, vlen_enc); |
| } |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evmasked_saturating_unsigned_op(int ideal_opc, BasicType elem_bt, KRegister mask, XMMRegister dst, |
| XMMRegister src1, Address src2, bool merge, int vlen_enc) { |
| switch (elem_bt) { |
| case T_BYTE: |
| if (ideal_opc == Op_SaturatingAddV) { |
| evpaddusb(dst, mask, src1, src2, merge, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| evpsubusb(dst, mask, src1, src2, merge, vlen_enc); |
| } |
| break; |
| case T_SHORT: |
| if (ideal_opc == Op_SaturatingAddV) { |
| evpaddusw(dst, mask, src1, src2, merge, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| evpsubusw(dst, mask, src1, src2, merge, vlen_enc); |
| } |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evmasked_op(int ideal_opc, BasicType eType, KRegister mask, XMMRegister dst, |
| XMMRegister src1, XMMRegister src2, bool merge, int vlen_enc, |
| bool is_varshift) { |
| switch (ideal_opc) { |
| case Op_AddVB: |
| evpaddb(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVS: |
| evpaddw(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVI: |
| evpaddd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVL: |
| evpaddq(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVF: |
| evaddps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVD: |
| evaddpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVB: |
| evpsubb(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVS: |
| evpsubw(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVI: |
| evpsubd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVL: |
| evpsubq(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVF: |
| evsubps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVD: |
| evsubpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVS: |
| evpmullw(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVI: |
| evpmulld(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVL: |
| evpmullq(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVF: |
| evmulps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVD: |
| evmulpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_DivVF: |
| evdivps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_DivVD: |
| evdivpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SqrtVF: |
| evsqrtps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SqrtVD: |
| evsqrtpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AbsVB: |
| evpabsb(dst, mask, src2, merge, vlen_enc); break; |
| case Op_AbsVS: |
| evpabsw(dst, mask, src2, merge, vlen_enc); break; |
| case Op_AbsVI: |
| evpabsd(dst, mask, src2, merge, vlen_enc); break; |
| case Op_AbsVL: |
| evpabsq(dst, mask, src2, merge, vlen_enc); break; |
| case Op_FmaVF: |
| evpfma213ps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_FmaVD: |
| evpfma213pd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_VectorRearrange: |
| evperm(eType, dst, mask, src2, src1, merge, vlen_enc); break; |
| case Op_LShiftVS: |
| evpsllw(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_LShiftVI: |
| evpslld(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_LShiftVL: |
| evpsllq(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_RShiftVS: |
| evpsraw(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_RShiftVI: |
| evpsrad(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_RShiftVL: |
| evpsraq(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_URShiftVS: |
| evpsrlw(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_URShiftVI: |
| evpsrld(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_URShiftVL: |
| evpsrlq(dst, mask, src1, src2, merge, vlen_enc, is_varshift); break; |
| case Op_RotateLeftV: |
| evrold(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_RotateRightV: |
| evrord(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MaxV: |
| evpmaxs(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MinV: |
| evpmins(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_UMinV: |
| evpminu(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_UMaxV: |
| evpmaxu(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_XorV: |
| evxor(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_OrV: |
| evor(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AndV: |
| evand(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| default: |
| fatal("Unsupported operation %s", NodeClassNames[ideal_opc]); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::evmasked_op(int ideal_opc, BasicType eType, KRegister mask, XMMRegister dst, |
| XMMRegister src1, Address src2, bool merge, int vlen_enc) { |
| switch (ideal_opc) { |
| case Op_AddVB: |
| evpaddb(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVS: |
| evpaddw(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVI: |
| evpaddd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVL: |
| evpaddq(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVF: |
| evaddps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AddVD: |
| evaddpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVB: |
| evpsubb(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVS: |
| evpsubw(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVI: |
| evpsubd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVL: |
| evpsubq(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVF: |
| evsubps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_SubVD: |
| evsubpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVS: |
| evpmullw(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVI: |
| evpmulld(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVL: |
| evpmullq(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVF: |
| evmulps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MulVD: |
| evmulpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_DivVF: |
| evdivps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_DivVD: |
| evdivpd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_FmaVF: |
| evpfma213ps(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_FmaVD: |
| evpfma213pd(dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MaxV: |
| evpmaxs(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_MinV: |
| evpmins(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_UMaxV: |
| evpmaxu(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_UMinV: |
| evpminu(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_XorV: |
| evxor(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_OrV: |
| evor(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| case Op_AndV: |
| evand(eType, dst, mask, src1, src2, merge, vlen_enc); break; |
| default: |
| fatal("Unsupported operation %s", NodeClassNames[ideal_opc]); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::masked_op(int ideal_opc, int mask_len, KRegister dst, |
| KRegister src1, KRegister src2) { |
| BasicType etype = T_ILLEGAL; |
| switch(mask_len) { |
| case 2: |
| case 4: |
| case 8: etype = T_BYTE; break; |
| case 16: etype = T_SHORT; break; |
| case 32: etype = T_INT; break; |
| case 64: etype = T_LONG; break; |
| default: fatal("Unsupported type"); break; |
| } |
| assert(etype != T_ILLEGAL, ""); |
| switch(ideal_opc) { |
| case Op_AndVMask: |
| kand(etype, dst, src1, src2); break; |
| case Op_OrVMask: |
| kor(etype, dst, src1, src2); break; |
| case Op_XorVMask: |
| kxor(etype, dst, src1, src2); break; |
| default: |
| fatal("Unsupported masked operation"); break; |
| } |
| } |
| |
| /* |
| * Following routine handles special floating point values(NaN/Inf/-Inf/Max/Min) for casting operation. |
| * If src is NaN, the result is 0. |
| * If the src is negative infinity or any value less than or equal to the value of Integer.MIN_VALUE, |
| * the result is equal to the value of Integer.MIN_VALUE. |
| * If the src is positive infinity or any value greater than or equal to the value of Integer.MAX_VALUE, |
| * the result is equal to the value of Integer.MAX_VALUE. |
| */ |
| void C2_MacroAssembler::vector_cast_float_to_int_special_cases_avx(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, XMMRegister xtmp4, |
| Register rscratch, AddressLiteral float_sign_flip, |
| int vec_enc) { |
| assert(rscratch != noreg || always_reachable(float_sign_flip), "missing"); |
| Label done; |
| vmovdqu(xtmp1, float_sign_flip, vec_enc, rscratch); |
| vpcmpeqd(xtmp2, dst, xtmp1, vec_enc); |
| vptest(xtmp2, xtmp2, vec_enc); |
| jccb(Assembler::equal, done); |
| |
| vpcmpeqd(xtmp4, xtmp4, xtmp4, vec_enc); |
| vpxor(xtmp1, xtmp1, xtmp4, vec_enc); |
| |
| vpxor(xtmp4, xtmp4, xtmp4, vec_enc); |
| vcmpps(xtmp3, src, src, Assembler::UNORD_Q, vec_enc); |
| vblendvps(dst, dst, xtmp4, xtmp3, vec_enc); |
| |
| // Recompute the mask for remaining special value. |
| vpxor(xtmp2, xtmp2, xtmp3, vec_enc); |
| // Extract SRC values corresponding to TRUE mask lanes. |
| vpand(xtmp4, xtmp2, src, vec_enc); |
| // Flip mask bits so that MSB bit of MASK lanes corresponding to +ve special |
| // values are set. |
| vpxor(xtmp3, xtmp2, xtmp4, vec_enc); |
| |
| vblendvps(dst, dst, xtmp1, xtmp3, vec_enc); |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::vector_cast_float_to_int_special_cases_evex(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, KRegister ktmp1, KRegister ktmp2, |
| Register rscratch, AddressLiteral float_sign_flip, |
| int vec_enc) { |
| assert(rscratch != noreg || always_reachable(float_sign_flip), "missing"); |
| Label done; |
| evmovdqul(xtmp1, k0, float_sign_flip, false, vec_enc, rscratch); |
| Assembler::evpcmpeqd(ktmp1, k0, xtmp1, dst, vec_enc); |
| kortestwl(ktmp1, ktmp1); |
| jccb(Assembler::equal, done); |
| |
| vpxor(xtmp2, xtmp2, xtmp2, vec_enc); |
| evcmpps(ktmp2, k0, src, src, Assembler::UNORD_Q, vec_enc); |
| evmovdqul(dst, ktmp2, xtmp2, true, vec_enc); |
| |
| kxorwl(ktmp1, ktmp1, ktmp2); |
| evcmpps(ktmp1, ktmp1, src, xtmp2, Assembler::NLT_UQ, vec_enc); |
| vpternlogd(xtmp2, 0x11, xtmp1, xtmp1, vec_enc); |
| evmovdqul(dst, ktmp1, xtmp2, true, vec_enc); |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::vector_cast_float_to_long_special_cases_evex(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, KRegister ktmp1, KRegister ktmp2, |
| Register rscratch, AddressLiteral double_sign_flip, |
| int vec_enc) { |
| assert(rscratch != noreg || always_reachable(double_sign_flip), "missing"); |
| |
| Label done; |
| evmovdquq(xtmp1, k0, double_sign_flip, false, vec_enc, rscratch); |
| Assembler::evpcmpeqq(ktmp1, k0, xtmp1, dst, vec_enc); |
| kortestwl(ktmp1, ktmp1); |
| jccb(Assembler::equal, done); |
| |
| vpxor(xtmp2, xtmp2, xtmp2, vec_enc); |
| evcmpps(ktmp2, k0, src, src, Assembler::UNORD_Q, vec_enc); |
| evmovdquq(dst, ktmp2, xtmp2, true, vec_enc); |
| |
| kxorwl(ktmp1, ktmp1, ktmp2); |
| evcmpps(ktmp1, ktmp1, src, xtmp2, Assembler::NLT_UQ, vec_enc); |
| vpternlogq(xtmp2, 0x11, xtmp1, xtmp1, vec_enc); |
| evmovdquq(dst, ktmp1, xtmp2, true, vec_enc); |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::vector_cast_double_to_int_special_cases_evex(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, KRegister ktmp1, KRegister ktmp2, |
| Register rscratch, AddressLiteral float_sign_flip, |
| int vec_enc) { |
| assert(rscratch != noreg || always_reachable(float_sign_flip), "missing"); |
| Label done; |
| evmovdquq(xtmp1, k0, float_sign_flip, false, vec_enc, rscratch); |
| Assembler::evpcmpeqd(ktmp1, k0, xtmp1, dst, vec_enc); |
| kortestwl(ktmp1, ktmp1); |
| jccb(Assembler::equal, done); |
| |
| vpxor(xtmp2, xtmp2, xtmp2, vec_enc); |
| evcmppd(ktmp2, k0, src, src, Assembler::UNORD_Q, vec_enc); |
| evmovdqul(dst, ktmp2, xtmp2, true, vec_enc); |
| |
| kxorwl(ktmp1, ktmp1, ktmp2); |
| evcmppd(ktmp1, ktmp1, src, xtmp2, Assembler::NLT_UQ, vec_enc); |
| vpternlogq(xtmp2, 0x11, xtmp1, xtmp1, vec_enc); |
| evmovdqul(dst, ktmp1, xtmp2, true, vec_enc); |
| bind(done); |
| } |
| |
| /* |
| * Following routine handles special floating point values(NaN/Inf/-Inf/Max/Min) for casting operation. |
| * If src is NaN, the result is 0. |
| * If the src is negative infinity or any value less than or equal to the value of Long.MIN_VALUE, |
| * the result is equal to the value of Long.MIN_VALUE. |
| * If the src is positive infinity or any value greater than or equal to the value of Long.MAX_VALUE, |
| * the result is equal to the value of Long.MAX_VALUE. |
| */ |
| void C2_MacroAssembler::vector_cast_double_to_long_special_cases_evex(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, KRegister ktmp1, KRegister ktmp2, |
| Register rscratch, AddressLiteral double_sign_flip, |
| int vec_enc) { |
| assert(rscratch != noreg || always_reachable(double_sign_flip), "missing"); |
| |
| Label done; |
| evmovdqul(xtmp1, k0, double_sign_flip, false, vec_enc, rscratch); |
| evpcmpeqq(ktmp1, xtmp1, dst, vec_enc); |
| kortestwl(ktmp1, ktmp1); |
| jccb(Assembler::equal, done); |
| |
| vpxor(xtmp2, xtmp2, xtmp2, vec_enc); |
| evcmppd(ktmp2, k0, src, src, Assembler::UNORD_Q, vec_enc); |
| evmovdquq(dst, ktmp2, xtmp2, true, vec_enc); |
| |
| kxorwl(ktmp1, ktmp1, ktmp2); |
| evcmppd(ktmp1, ktmp1, src, xtmp2, Assembler::NLT_UQ, vec_enc); |
| vpternlogq(xtmp2, 0x11, xtmp1, xtmp1, vec_enc); |
| evmovdquq(dst, ktmp1, xtmp2, true, vec_enc); |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::vector_crosslane_doubleword_pack_avx(XMMRegister dst, XMMRegister src, XMMRegister zero, |
| XMMRegister xtmp, int index, int vec_enc) { |
| assert(vec_enc < Assembler::AVX_512bit, ""); |
| if (vec_enc == Assembler::AVX_256bit) { |
| vextractf128_high(xtmp, src); |
| vshufps(dst, src, xtmp, index, vec_enc); |
| } else { |
| vshufps(dst, src, zero, index, vec_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_cast_double_to_int_special_cases_avx(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, XMMRegister xtmp2, |
| XMMRegister xtmp3, XMMRegister xtmp4, XMMRegister xtmp5, Register rscratch, |
| AddressLiteral float_sign_flip, int src_vec_enc) { |
| assert(rscratch != noreg || always_reachable(float_sign_flip), "missing"); |
| |
| Label done; |
| // Compare the destination lanes with float_sign_flip |
| // value to get mask for all special values. |
| movdqu(xtmp1, float_sign_flip, rscratch); |
| vpcmpeqd(xtmp2, dst, xtmp1, Assembler::AVX_128bit); |
| ptest(xtmp2, xtmp2); |
| jccb(Assembler::equal, done); |
| |
| // Flip float_sign_flip to get max integer value. |
| vpcmpeqd(xtmp4, xtmp4, xtmp4, Assembler::AVX_128bit); |
| pxor(xtmp1, xtmp4); |
| |
| // Set detination lanes corresponding to unordered source lanes as zero. |
| vpxor(xtmp4, xtmp4, xtmp4, src_vec_enc); |
| vcmppd(xtmp3, src, src, Assembler::UNORD_Q, src_vec_enc); |
| |
| // Shuffle mask vector and pack lower doubles word from each quadword lane. |
| vector_crosslane_doubleword_pack_avx(xtmp3, xtmp3, xtmp4, xtmp5, 0x88, src_vec_enc); |
| vblendvps(dst, dst, xtmp4, xtmp3, Assembler::AVX_128bit); |
| |
| // Recompute the mask for remaining special value. |
| pxor(xtmp2, xtmp3); |
| // Extract mask corresponding to non-negative source lanes. |
| vcmppd(xtmp3, src, xtmp4, Assembler::NLT_UQ, src_vec_enc); |
| |
| // Shuffle mask vector and pack lower doubles word from each quadword lane. |
| vector_crosslane_doubleword_pack_avx(xtmp3, xtmp3, xtmp4, xtmp5, 0x88, src_vec_enc); |
| pand(xtmp3, xtmp2); |
| |
| // Replace destination lanes holding special value(0x80000000) with max int |
| // if corresponding source lane holds a +ve value. |
| vblendvps(dst, dst, xtmp1, xtmp3, Assembler::AVX_128bit); |
| bind(done); |
| } |
| |
| |
| void C2_MacroAssembler::vector_cast_int_to_subword(BasicType to_elem_bt, XMMRegister dst, XMMRegister zero, |
| XMMRegister xtmp, Register rscratch, int vec_enc) { |
| switch(to_elem_bt) { |
| case T_SHORT: |
| assert(rscratch != noreg || always_reachable(ExternalAddress(StubRoutines::x86::vector_int_to_short_mask())), "missing"); |
| vpand(dst, dst, ExternalAddress(StubRoutines::x86::vector_int_to_short_mask()), vec_enc, rscratch); |
| vpackusdw(dst, dst, zero, vec_enc); |
| if (vec_enc == Assembler::AVX_256bit) { |
| vector_crosslane_doubleword_pack_avx(dst, dst, zero, xtmp, 0x44, vec_enc); |
| } |
| break; |
| case T_BYTE: |
| assert(rscratch != noreg || always_reachable(ExternalAddress(StubRoutines::x86::vector_int_to_byte_mask())), "missing"); |
| vpand(dst, dst, ExternalAddress(StubRoutines::x86::vector_int_to_byte_mask()), vec_enc, rscratch); |
| vpackusdw(dst, dst, zero, vec_enc); |
| if (vec_enc == Assembler::AVX_256bit) { |
| vector_crosslane_doubleword_pack_avx(dst, dst, zero, xtmp, 0x44, vec_enc); |
| } |
| vpackuswb(dst, dst, zero, vec_enc); |
| break; |
| default: assert(false, "%s", type2name(to_elem_bt)); |
| } |
| } |
| |
| /* |
| * Algorithm for vector D2L and F2I conversions:- |
| * a) Perform vector D2L/F2I cast. |
| * b) Choose fast path if none of the result vector lane contains 0x80000000 value. |
| * It signifies that source value could be any of the special floating point |
| * values(NaN,-Inf,Inf,Max,-Min). |
| * c) Set destination to zero if source is NaN value. |
| * d) Replace 0x80000000 with MaxInt if source lane contains a +ve value. |
| */ |
| |
| void C2_MacroAssembler::vector_castF2X_avx(BasicType to_elem_bt, XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, XMMRegister xtmp4, |
| AddressLiteral float_sign_flip, Register rscratch, int vec_enc) { |
| int to_elem_sz = type2aelembytes(to_elem_bt); |
| assert(to_elem_sz <= 4, ""); |
| vcvttps2dq(dst, src, vec_enc); |
| vector_cast_float_to_int_special_cases_avx(dst, src, xtmp1, xtmp2, xtmp3, xtmp4, rscratch, float_sign_flip, vec_enc); |
| if (to_elem_sz < 4) { |
| vpxor(xtmp4, xtmp4, xtmp4, vec_enc); |
| vector_cast_int_to_subword(to_elem_bt, dst, xtmp4, xtmp3, rscratch, vec_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_castF2X_evex(BasicType to_elem_bt, XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, KRegister ktmp1, KRegister ktmp2, AddressLiteral float_sign_flip, |
| Register rscratch, int vec_enc) { |
| int to_elem_sz = type2aelembytes(to_elem_bt); |
| assert(to_elem_sz <= 4, ""); |
| vcvttps2dq(dst, src, vec_enc); |
| vector_cast_float_to_int_special_cases_evex(dst, src, xtmp1, xtmp2, ktmp1, ktmp2, rscratch, float_sign_flip, vec_enc); |
| switch(to_elem_bt) { |
| case T_INT: |
| break; |
| case T_SHORT: |
| evpmovdw(dst, dst, vec_enc); |
| break; |
| case T_BYTE: |
| evpmovdb(dst, dst, vec_enc); |
| break; |
| default: assert(false, "%s", type2name(to_elem_bt)); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_castF2L_evex(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, XMMRegister xtmp2, |
| KRegister ktmp1, KRegister ktmp2, AddressLiteral double_sign_flip, |
| Register rscratch, int vec_enc) { |
| evcvttps2qq(dst, src, vec_enc); |
| vector_cast_float_to_long_special_cases_evex(dst, src, xtmp1, xtmp2, ktmp1, ktmp2, rscratch, double_sign_flip, vec_enc); |
| } |
| |
| // Handling for downcasting from double to integer or sub-word types on AVX2. |
| void C2_MacroAssembler::vector_castD2X_avx(BasicType to_elem_bt, XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, XMMRegister xtmp4, XMMRegister xtmp5, |
| AddressLiteral float_sign_flip, Register rscratch, int vec_enc) { |
| int to_elem_sz = type2aelembytes(to_elem_bt); |
| assert(to_elem_sz < 8, ""); |
| vcvttpd2dq(dst, src, vec_enc); |
| vector_cast_double_to_int_special_cases_avx(dst, src, xtmp1, xtmp2, xtmp3, xtmp4, xtmp5, rscratch, |
| float_sign_flip, vec_enc); |
| if (to_elem_sz < 4) { |
| // xtmp4 holds all zero lanes. |
| vector_cast_int_to_subword(to_elem_bt, dst, xtmp4, xtmp5, rscratch, Assembler::AVX_128bit); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_castD2X_evex(BasicType to_elem_bt, XMMRegister dst, XMMRegister src, |
| XMMRegister xtmp1, XMMRegister xtmp2, KRegister ktmp1, |
| KRegister ktmp2, AddressLiteral sign_flip, |
| Register rscratch, int vec_enc) { |
| if (VM_Version::supports_avx512dq()) { |
| evcvttpd2qq(dst, src, vec_enc); |
| vector_cast_double_to_long_special_cases_evex(dst, src, xtmp1, xtmp2, ktmp1, ktmp2, rscratch, sign_flip, vec_enc); |
| switch(to_elem_bt) { |
| case T_LONG: |
| break; |
| case T_INT: |
| evpmovsqd(dst, dst, vec_enc); |
| break; |
| case T_SHORT: |
| evpmovsqd(dst, dst, vec_enc); |
| evpmovdw(dst, dst, vec_enc); |
| break; |
| case T_BYTE: |
| evpmovsqd(dst, dst, vec_enc); |
| evpmovdb(dst, dst, vec_enc); |
| break; |
| default: assert(false, "%s", type2name(to_elem_bt)); |
| } |
| } else { |
| assert(type2aelembytes(to_elem_bt) <= 4, ""); |
| vcvttpd2dq(dst, src, vec_enc); |
| vector_cast_double_to_int_special_cases_evex(dst, src, xtmp1, xtmp2, ktmp1, ktmp2, rscratch, sign_flip, vec_enc); |
| switch(to_elem_bt) { |
| case T_INT: |
| break; |
| case T_SHORT: |
| evpmovdw(dst, dst, vec_enc); |
| break; |
| case T_BYTE: |
| evpmovdb(dst, dst, vec_enc); |
| break; |
| default: assert(false, "%s", type2name(to_elem_bt)); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vector_round_double_evex(XMMRegister dst, XMMRegister src, |
| AddressLiteral double_sign_flip, AddressLiteral new_mxcsr, int vec_enc, |
| Register tmp, XMMRegister xtmp1, XMMRegister xtmp2, KRegister ktmp1, KRegister ktmp2) { |
| // Perform floor(val+0.5) operation under the influence of MXCSR.RC mode roundTowards -inf. |
| // and re-instantiate original MXCSR.RC mode after that. |
| ldmxcsr(new_mxcsr, tmp /*rscratch*/); |
| |
| mov64(tmp, julong_cast(0.5L)); |
| evpbroadcastq(xtmp1, tmp, vec_enc); |
| vaddpd(xtmp1, src , xtmp1, vec_enc); |
| evcvtpd2qq(dst, xtmp1, vec_enc); |
| vector_cast_double_to_long_special_cases_evex(dst, src, xtmp1, xtmp2, ktmp1, ktmp2, tmp /*rscratch*/, |
| double_sign_flip, vec_enc);; |
| |
| ldmxcsr(ExternalAddress(StubRoutines::x86::addr_mxcsr_std()), tmp /*rscratch*/); |
| } |
| |
| void C2_MacroAssembler::vector_round_float_evex(XMMRegister dst, XMMRegister src, |
| AddressLiteral float_sign_flip, AddressLiteral new_mxcsr, int vec_enc, |
| Register tmp, XMMRegister xtmp1, XMMRegister xtmp2, KRegister ktmp1, KRegister ktmp2) { |
| // Perform floor(val+0.5) operation under the influence of MXCSR.RC mode roundTowards -inf. |
| // and re-instantiate original MXCSR.RC mode after that. |
| ldmxcsr(new_mxcsr, tmp /*rscratch*/); |
| |
| movl(tmp, jint_cast(0.5)); |
| movq(xtmp1, tmp); |
| vbroadcastss(xtmp1, xtmp1, vec_enc); |
| vaddps(xtmp1, src , xtmp1, vec_enc); |
| vcvtps2dq(dst, xtmp1, vec_enc); |
| vector_cast_float_to_int_special_cases_evex(dst, src, xtmp1, xtmp2, ktmp1, ktmp2, tmp /*rscratch*/, |
| float_sign_flip, vec_enc); |
| |
| ldmxcsr(ExternalAddress(StubRoutines::x86::addr_mxcsr_std()), tmp /*rscratch*/); |
| } |
| |
| void C2_MacroAssembler::vector_round_float_avx(XMMRegister dst, XMMRegister src, |
| AddressLiteral float_sign_flip, AddressLiteral new_mxcsr, int vec_enc, |
| Register tmp, XMMRegister xtmp1, XMMRegister xtmp2, XMMRegister xtmp3, XMMRegister xtmp4) { |
| // Perform floor(val+0.5) operation under the influence of MXCSR.RC mode roundTowards -inf. |
| // and re-instantiate original MXCSR.RC mode after that. |
| ldmxcsr(new_mxcsr, tmp /*rscratch*/); |
| |
| movl(tmp, jint_cast(0.5)); |
| movq(xtmp1, tmp); |
| vbroadcastss(xtmp1, xtmp1, vec_enc); |
| vaddps(xtmp1, src , xtmp1, vec_enc); |
| vcvtps2dq(dst, xtmp1, vec_enc); |
| vector_cast_float_to_int_special_cases_avx(dst, src, xtmp1, xtmp2, xtmp3, xtmp4, tmp /*rscratch*/, float_sign_flip, vec_enc); |
| |
| ldmxcsr(ExternalAddress(StubRoutines::x86::addr_mxcsr_std()), tmp /*rscratch*/); |
| } |
| |
| void C2_MacroAssembler::vector_unsigned_cast(XMMRegister dst, XMMRegister src, int vlen_enc, |
| BasicType from_elem_bt, BasicType to_elem_bt) { |
| switch (from_elem_bt) { |
| case T_BYTE: |
| switch (to_elem_bt) { |
| case T_SHORT: vpmovzxbw(dst, src, vlen_enc); break; |
| case T_INT: vpmovzxbd(dst, src, vlen_enc); break; |
| case T_LONG: vpmovzxbq(dst, src, vlen_enc); break; |
| default: ShouldNotReachHere(); |
| } |
| break; |
| case T_SHORT: |
| switch (to_elem_bt) { |
| case T_INT: vpmovzxwd(dst, src, vlen_enc); break; |
| case T_LONG: vpmovzxwq(dst, src, vlen_enc); break; |
| default: ShouldNotReachHere(); |
| } |
| break; |
| case T_INT: |
| assert(to_elem_bt == T_LONG, ""); |
| vpmovzxdq(dst, src, vlen_enc); |
| break; |
| default: |
| ShouldNotReachHere(); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_signed_cast(XMMRegister dst, XMMRegister src, int vlen_enc, |
| BasicType from_elem_bt, BasicType to_elem_bt) { |
| switch (from_elem_bt) { |
| case T_BYTE: |
| switch (to_elem_bt) { |
| case T_SHORT: vpmovsxbw(dst, src, vlen_enc); break; |
| case T_INT: vpmovsxbd(dst, src, vlen_enc); break; |
| case T_LONG: vpmovsxbq(dst, src, vlen_enc); break; |
| default: ShouldNotReachHere(); |
| } |
| break; |
| case T_SHORT: |
| switch (to_elem_bt) { |
| case T_INT: vpmovsxwd(dst, src, vlen_enc); break; |
| case T_LONG: vpmovsxwq(dst, src, vlen_enc); break; |
| default: ShouldNotReachHere(); |
| } |
| break; |
| case T_INT: |
| assert(to_elem_bt == T_LONG, ""); |
| vpmovsxdq(dst, src, vlen_enc); |
| break; |
| default: |
| ShouldNotReachHere(); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_mask_cast(XMMRegister dst, XMMRegister src, |
| BasicType dst_bt, BasicType src_bt, int vlen) { |
| int vlen_enc = vector_length_encoding(MAX2(type2aelembytes(src_bt), type2aelembytes(dst_bt)) * vlen); |
| assert(vlen_enc != AVX_512bit, ""); |
| |
| int dst_bt_size = type2aelembytes(dst_bt); |
| int src_bt_size = type2aelembytes(src_bt); |
| if (dst_bt_size > src_bt_size) { |
| switch (dst_bt_size / src_bt_size) { |
| case 2: vpmovsxbw(dst, src, vlen_enc); break; |
| case 4: vpmovsxbd(dst, src, vlen_enc); break; |
| case 8: vpmovsxbq(dst, src, vlen_enc); break; |
| default: ShouldNotReachHere(); |
| } |
| } else { |
| assert(dst_bt_size < src_bt_size, ""); |
| switch (src_bt_size / dst_bt_size) { |
| case 2: { |
| if (vlen_enc == AVX_128bit) { |
| vpacksswb(dst, src, src, vlen_enc); |
| } else { |
| vpacksswb(dst, src, src, vlen_enc); |
| vpermq(dst, dst, 0x08, vlen_enc); |
| } |
| break; |
| } |
| case 4: { |
| if (vlen_enc == AVX_128bit) { |
| vpackssdw(dst, src, src, vlen_enc); |
| vpacksswb(dst, dst, dst, vlen_enc); |
| } else { |
| vpackssdw(dst, src, src, vlen_enc); |
| vpermq(dst, dst, 0x08, vlen_enc); |
| vpacksswb(dst, dst, dst, AVX_128bit); |
| } |
| break; |
| } |
| case 8: { |
| if (vlen_enc == AVX_128bit) { |
| vpshufd(dst, src, 0x08, vlen_enc); |
| vpackssdw(dst, dst, dst, vlen_enc); |
| vpacksswb(dst, dst, dst, vlen_enc); |
| } else { |
| vpshufd(dst, src, 0x08, vlen_enc); |
| vpermq(dst, dst, 0x08, vlen_enc); |
| vpackssdw(dst, dst, dst, AVX_128bit); |
| vpacksswb(dst, dst, dst, AVX_128bit); |
| } |
| break; |
| } |
| default: ShouldNotReachHere(); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::evpternlog(XMMRegister dst, int func, KRegister mask, XMMRegister src2, XMMRegister src3, |
| bool merge, BasicType bt, int vlen_enc) { |
| if (bt == T_INT) { |
| evpternlogd(dst, func, mask, src2, src3, merge, vlen_enc); |
| } else { |
| assert(bt == T_LONG, ""); |
| evpternlogq(dst, func, mask, src2, src3, merge, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::evpternlog(XMMRegister dst, int func, KRegister mask, XMMRegister src2, Address src3, |
| bool merge, BasicType bt, int vlen_enc) { |
| if (bt == T_INT) { |
| evpternlogd(dst, func, mask, src2, src3, merge, vlen_enc); |
| } else { |
| assert(bt == T_LONG, ""); |
| evpternlogq(dst, func, mask, src2, src3, merge, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_long_to_maskvec(XMMRegister dst, Register src, Register rtmp1, |
| Register rtmp2, XMMRegister xtmp, int mask_len, |
| int vec_enc) { |
| int index = 0; |
| int vindex = 0; |
| mov64(rtmp1, 0x0101010101010101L); |
| pdepq(rtmp1, src, rtmp1); |
| if (mask_len > 8) { |
| movq(rtmp2, src); |
| vpxor(xtmp, xtmp, xtmp, vec_enc); |
| movq(xtmp, rtmp1); |
| } |
| movq(dst, rtmp1); |
| |
| mask_len -= 8; |
| while (mask_len > 0) { |
| assert ((mask_len & 0x7) == 0, "mask must be multiple of 8"); |
| index++; |
| if ((index % 2) == 0) { |
| pxor(xtmp, xtmp); |
| } |
| mov64(rtmp1, 0x0101010101010101L); |
| shrq(rtmp2, 8); |
| pdepq(rtmp1, rtmp2, rtmp1); |
| pinsrq(xtmp, rtmp1, index % 2); |
| vindex = index / 2; |
| if (vindex) { |
| // Write entire 16 byte vector when both 64 bit |
| // lanes are update to save redundant instructions. |
| if (index % 2) { |
| vinsertf128(dst, dst, xtmp, vindex); |
| } |
| } else { |
| vmovdqu(dst, xtmp); |
| } |
| mask_len -= 8; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_mask_operation_helper(int opc, Register dst, Register tmp, int masklen) { |
| switch(opc) { |
| case Op_VectorMaskTrueCount: |
| popcntq(dst, tmp); |
| break; |
| case Op_VectorMaskLastTrue: |
| if (VM_Version::supports_lzcnt()) { |
| lzcntq(tmp, tmp); |
| movl(dst, 63); |
| subl(dst, tmp); |
| } else { |
| movl(dst, -1); |
| bsrq(tmp, tmp); |
| cmov32(Assembler::notZero, dst, tmp); |
| } |
| break; |
| case Op_VectorMaskFirstTrue: |
| if (VM_Version::supports_bmi1()) { |
| if (masklen < 32) { |
| orl(tmp, 1 << masklen); |
| tzcntl(dst, tmp); |
| } else if (masklen == 32) { |
| tzcntl(dst, tmp); |
| } else { |
| assert(masklen == 64, ""); |
| tzcntq(dst, tmp); |
| } |
| } else { |
| if (masklen < 32) { |
| orl(tmp, 1 << masklen); |
| bsfl(dst, tmp); |
| } else { |
| assert(masklen == 32 || masklen == 64, ""); |
| movl(dst, masklen); |
| if (masklen == 32) { |
| bsfl(tmp, tmp); |
| } else { |
| bsfq(tmp, tmp); |
| } |
| cmov32(Assembler::notZero, dst, tmp); |
| } |
| } |
| break; |
| case Op_VectorMaskToLong: |
| assert(dst == tmp, "Dst and tmp should be the same for toLong operations"); |
| break; |
| default: assert(false, "Unhandled mask operation"); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_mask_operation(int opc, Register dst, KRegister mask, Register tmp, |
| int masklen, int masksize, int vec_enc) { |
| assert(VM_Version::supports_popcnt(), ""); |
| |
| if(VM_Version::supports_avx512bw()) { |
| kmovql(tmp, mask); |
| } else { |
| assert(masklen <= 16, ""); |
| kmovwl(tmp, mask); |
| } |
| |
| // Mask generated out of partial vector comparisons/replicate/mask manipulation |
| // operations needs to be clipped. |
| if (masksize < 16 && opc != Op_VectorMaskFirstTrue) { |
| andq(tmp, (1 << masklen) - 1); |
| } |
| |
| vector_mask_operation_helper(opc, dst, tmp, masklen); |
| } |
| |
| void C2_MacroAssembler::vector_mask_operation(int opc, Register dst, XMMRegister mask, XMMRegister xtmp, |
| Register tmp, int masklen, BasicType bt, int vec_enc) { |
| assert((vec_enc == AVX_128bit && VM_Version::supports_avx()) || |
| (vec_enc == AVX_256bit && (VM_Version::supports_avx2() || type2aelembytes(bt) >= 4)), ""); |
| assert(VM_Version::supports_popcnt(), ""); |
| |
| bool need_clip = false; |
| switch(bt) { |
| case T_BOOLEAN: |
| // While masks of other types contain 0, -1; boolean masks contain lane values of 0, 1 |
| vpxor(xtmp, xtmp, xtmp, vec_enc); |
| vpsubb(xtmp, xtmp, mask, vec_enc); |
| vpmovmskb(tmp, xtmp, vec_enc); |
| need_clip = masklen < 16; |
| break; |
| case T_BYTE: |
| vpmovmskb(tmp, mask, vec_enc); |
| need_clip = masklen < 16; |
| break; |
| case T_SHORT: |
| vpacksswb(xtmp, mask, mask, vec_enc); |
| if (masklen >= 16) { |
| vpermpd(xtmp, xtmp, 8, vec_enc); |
| } |
| vpmovmskb(tmp, xtmp, Assembler::AVX_128bit); |
| need_clip = masklen < 16; |
| break; |
| case T_INT: |
| case T_FLOAT: |
| vmovmskps(tmp, mask, vec_enc); |
| need_clip = masklen < 4; |
| break; |
| case T_LONG: |
| case T_DOUBLE: |
| vmovmskpd(tmp, mask, vec_enc); |
| need_clip = masklen < 2; |
| break; |
| default: assert(false, "Unhandled type, %s", type2name(bt)); |
| } |
| |
| // Mask generated out of partial vector comparisons/replicate/mask manipulation |
| // operations needs to be clipped. |
| if (need_clip && opc != Op_VectorMaskFirstTrue) { |
| // need_clip implies masklen < 32 |
| andq(tmp, (1 << masklen) - 1); |
| } |
| |
| vector_mask_operation_helper(opc, dst, tmp, masklen); |
| } |
| |
| void C2_MacroAssembler::vector_mask_compress(KRegister dst, KRegister src, Register rtmp1, |
| Register rtmp2, int mask_len) { |
| kmov(rtmp1, src); |
| andq(rtmp1, (0xFFFFFFFFFFFFFFFFUL >> (64 - mask_len))); |
| mov64(rtmp2, -1L); |
| pextq(rtmp2, rtmp2, rtmp1); |
| kmov(dst, rtmp2); |
| } |
| |
| void C2_MacroAssembler::vector_compress_expand_avx2(int opcode, XMMRegister dst, XMMRegister src, |
| XMMRegister mask, Register rtmp, Register rscratch, |
| XMMRegister permv, XMMRegister xtmp, BasicType bt, |
| int vec_enc) { |
| assert(type2aelembytes(bt) >= 4, ""); |
| assert(opcode == Op_CompressV || opcode == Op_ExpandV, ""); |
| address compress_perm_table = nullptr; |
| address expand_perm_table = nullptr; |
| if (type2aelembytes(bt) == 8) { |
| compress_perm_table = StubRoutines::x86::compress_perm_table64(); |
| expand_perm_table = StubRoutines::x86::expand_perm_table64(); |
| vmovmskpd(rtmp, mask, vec_enc); |
| } else { |
| compress_perm_table = StubRoutines::x86::compress_perm_table32(); |
| expand_perm_table = StubRoutines::x86::expand_perm_table32(); |
| vmovmskps(rtmp, mask, vec_enc); |
| } |
| shlq(rtmp, 5); // for 32 byte permute row. |
| if (opcode == Op_CompressV) { |
| lea(rscratch, ExternalAddress(compress_perm_table)); |
| } else { |
| lea(rscratch, ExternalAddress(expand_perm_table)); |
| } |
| addptr(rtmp, rscratch); |
| vmovdqu(permv, Address(rtmp)); |
| vpermps(dst, permv, src, Assembler::AVX_256bit); |
| vpxor(xtmp, xtmp, xtmp, vec_enc); |
| // Blend the result with zero vector using permute mask, each column entry |
| // in a permute table row contains either a valid permute index or a -1 (default) |
| // value, this can potentially be used as a blending mask after |
| // compressing/expanding the source vector lanes. |
| vblendvps(dst, dst, xtmp, permv, vec_enc, true, permv); |
| } |
| |
| void C2_MacroAssembler::vector_compress_expand(int opcode, XMMRegister dst, XMMRegister src, KRegister mask, |
| bool merge, BasicType bt, int vec_enc) { |
| if (opcode == Op_CompressV) { |
| switch(bt) { |
| case T_BYTE: |
| evpcompressb(dst, mask, src, merge, vec_enc); |
| break; |
| case T_CHAR: |
| case T_SHORT: |
| evpcompressw(dst, mask, src, merge, vec_enc); |
| break; |
| case T_INT: |
| evpcompressd(dst, mask, src, merge, vec_enc); |
| break; |
| case T_FLOAT: |
| evcompressps(dst, mask, src, merge, vec_enc); |
| break; |
| case T_LONG: |
| evpcompressq(dst, mask, src, merge, vec_enc); |
| break; |
| case T_DOUBLE: |
| evcompresspd(dst, mask, src, merge, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| } else { |
| assert(opcode == Op_ExpandV, ""); |
| switch(bt) { |
| case T_BYTE: |
| evpexpandb(dst, mask, src, merge, vec_enc); |
| break; |
| case T_CHAR: |
| case T_SHORT: |
| evpexpandw(dst, mask, src, merge, vec_enc); |
| break; |
| case T_INT: |
| evpexpandd(dst, mask, src, merge, vec_enc); |
| break; |
| case T_FLOAT: |
| evexpandps(dst, mask, src, merge, vec_enc); |
| break; |
| case T_LONG: |
| evpexpandq(dst, mask, src, merge, vec_enc); |
| break; |
| case T_DOUBLE: |
| evexpandpd(dst, mask, src, merge, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vector_signum_evex(int opcode, XMMRegister dst, XMMRegister src, XMMRegister zero, XMMRegister one, |
| KRegister ktmp1, int vec_enc) { |
| if (opcode == Op_SignumVD) { |
| vsubpd(dst, zero, one, vec_enc); |
| // if src < 0 ? -1 : 1 |
| evcmppd(ktmp1, k0, src, zero, Assembler::LT_OQ, vec_enc); |
| evblendmpd(dst, ktmp1, one, dst, true, vec_enc); |
| // if src == NaN, -0.0 or 0.0 return src. |
| evcmppd(ktmp1, k0, src, zero, Assembler::EQ_UQ, vec_enc); |
| evblendmpd(dst, ktmp1, dst, src, true, vec_enc); |
| } else { |
| assert(opcode == Op_SignumVF, ""); |
| vsubps(dst, zero, one, vec_enc); |
| // if src < 0 ? -1 : 1 |
| evcmpps(ktmp1, k0, src, zero, Assembler::LT_OQ, vec_enc); |
| evblendmps(dst, ktmp1, one, dst, true, vec_enc); |
| // if src == NaN, -0.0 or 0.0 return src. |
| evcmpps(ktmp1, k0, src, zero, Assembler::EQ_UQ, vec_enc); |
| evblendmps(dst, ktmp1, dst, src, true, vec_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_signum_avx(int opcode, XMMRegister dst, XMMRegister src, XMMRegister zero, XMMRegister one, |
| XMMRegister xtmp1, int vec_enc) { |
| if (opcode == Op_SignumVD) { |
| vsubpd(dst, zero, one, vec_enc); |
| // if src < 0 ? -1 : 1 |
| vblendvpd(dst, one, dst, src, vec_enc, true, xtmp1); |
| // if src == NaN, -0.0 or 0.0 return src. |
| vcmppd(xtmp1, src, zero, Assembler::EQ_UQ, vec_enc); |
| vblendvpd(dst, dst, src, xtmp1, vec_enc, false, xtmp1); |
| } else { |
| assert(opcode == Op_SignumVF, ""); |
| vsubps(dst, zero, one, vec_enc); |
| // if src < 0 ? -1 : 1 |
| vblendvps(dst, one, dst, src, vec_enc, true, xtmp1); |
| // if src == NaN, -0.0 or 0.0 return src. |
| vcmpps(xtmp1, src, zero, Assembler::EQ_UQ, vec_enc); |
| vblendvps(dst, dst, src, xtmp1, vec_enc, false, xtmp1); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_maskall_operation(KRegister dst, Register src, int mask_len) { |
| if (VM_Version::supports_avx512bw()) { |
| if (mask_len > 32) { |
| kmovql(dst, src); |
| } else { |
| kmovdl(dst, src); |
| if (mask_len != 32) { |
| kshiftrdl(dst, dst, 32 - mask_len); |
| } |
| } |
| } else { |
| assert(mask_len <= 16, ""); |
| kmovwl(dst, src); |
| if (mask_len != 16) { |
| kshiftrwl(dst, dst, 16 - mask_len); |
| } |
| } |
| } |
| |
| void C2_MacroAssembler::vbroadcast(BasicType bt, XMMRegister dst, int imm32, Register rtmp, int vec_enc) { |
| int lane_size = type2aelembytes(bt); |
| if ((is_non_subword_integral_type(bt) && VM_Version::supports_avx512vl()) || |
| (is_subword_type(bt) && VM_Version::supports_avx512vlbw())) { |
| movptr(rtmp, imm32); |
| switch(lane_size) { |
| case 1 : evpbroadcastb(dst, rtmp, vec_enc); break; |
| case 2 : evpbroadcastw(dst, rtmp, vec_enc); break; |
| case 4 : evpbroadcastd(dst, rtmp, vec_enc); break; |
| case 8 : evpbroadcastq(dst, rtmp, vec_enc); break; |
| fatal("Unsupported lane size %d", lane_size); |
| break; |
| } |
| } else { |
| movptr(rtmp, imm32); |
| movq(dst, rtmp); |
| switch(lane_size) { |
| case 1 : vpbroadcastb(dst, dst, vec_enc); break; |
| case 2 : vpbroadcastw(dst, dst, vec_enc); break; |
| case 4 : vpbroadcastd(dst, dst, vec_enc); break; |
| case 8 : vpbroadcastq(dst, dst, vec_enc); break; |
| fatal("Unsupported lane size %d", lane_size); |
| break; |
| } |
| } |
| } |
| |
| // |
| // Following is lookup table based popcount computation algorithm:- |
| // Index Bit set count |
| // [ 0000 -> 0, |
| // 0001 -> 1, |
| // 0010 -> 1, |
| // 0011 -> 2, |
| // 0100 -> 1, |
| // 0101 -> 2, |
| // 0110 -> 2, |
| // 0111 -> 3, |
| // 1000 -> 1, |
| // 1001 -> 2, |
| // 1010 -> 3, |
| // 1011 -> 3, |
| // 1100 -> 2, |
| // 1101 -> 3, |
| // 1111 -> 4 ] |
| // a. Count the number of 1s in 4 LSB bits of each byte. These bits are used as |
| // shuffle indices for lookup table access. |
| // b. Right shift each byte of vector lane by 4 positions. |
| // c. Count the number of 1s in 4 MSB bits each byte. These bits are used as |
| // shuffle indices for lookup table access. |
| // d. Add the bitset count of upper and lower 4 bits of each byte. |
| // e. Unpack double words to quad words and compute sum of absolute difference of bitset |
| // count of all the bytes of a quadword. |
| // f. Perform step e. for upper 128bit vector lane. |
| // g. Pack the bitset count of quadwords back to double word. |
| // h. Unpacking and packing operations are not needed for 64bit vector lane. |
| |
| void C2_MacroAssembler::vector_popcount_byte(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp, int vec_enc) { |
| assert((vec_enc == Assembler::AVX_512bit && VM_Version::supports_avx512bw()) || VM_Version::supports_avx2(), ""); |
| vbroadcast(T_INT, xtmp1, 0x0F0F0F0F, rtmp, vec_enc); |
| vpsrlw(dst, src, 4, vec_enc); |
| vpand(dst, dst, xtmp1, vec_enc); |
| vpand(xtmp1, src, xtmp1, vec_enc); |
| vmovdqu(xtmp2, ExternalAddress(StubRoutines::x86::vector_popcount_lut()), vec_enc, noreg); |
| vpshufb(xtmp1, xtmp2, xtmp1, vec_enc); |
| vpshufb(dst, xtmp2, dst, vec_enc); |
| vpaddb(dst, dst, xtmp1, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_popcount_int(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp, int vec_enc) { |
| vector_popcount_byte(xtmp1, src, dst, xtmp2, rtmp, vec_enc); |
| // Following code is as per steps e,f,g and h of above algorithm. |
| vpxor(xtmp2, xtmp2, xtmp2, vec_enc); |
| vpunpckhdq(dst, xtmp1, xtmp2, vec_enc); |
| vpsadbw(dst, dst, xtmp2, vec_enc); |
| vpunpckldq(xtmp1, xtmp1, xtmp2, vec_enc); |
| vpsadbw(xtmp1, xtmp1, xtmp2, vec_enc); |
| vpackuswb(dst, xtmp1, dst, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_popcount_short(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp, int vec_enc) { |
| vector_popcount_byte(xtmp1, src, dst, xtmp2, rtmp, vec_enc); |
| // Add the popcount of upper and lower bytes of word. |
| vbroadcast(T_INT, xtmp2, 0x00FF00FF, rtmp, vec_enc); |
| vpsrlw(dst, xtmp1, 8, vec_enc); |
| vpand(xtmp1, xtmp1, xtmp2, vec_enc); |
| vpaddw(dst, dst, xtmp1, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_popcount_long(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp, int vec_enc) { |
| vector_popcount_byte(xtmp1, src, dst, xtmp2, rtmp, vec_enc); |
| vpxor(xtmp2, xtmp2, xtmp2, vec_enc); |
| vpsadbw(dst, xtmp1, xtmp2, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_popcount_integral(BasicType bt, XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp, int vec_enc) { |
| switch(bt) { |
| case T_LONG: |
| vector_popcount_long(dst, src, xtmp1, xtmp2, rtmp, vec_enc); |
| break; |
| case T_INT: |
| vector_popcount_int(dst, src, xtmp1, xtmp2, rtmp, vec_enc); |
| break; |
| case T_CHAR: |
| case T_SHORT: |
| vector_popcount_short(dst, src, xtmp1, xtmp2, rtmp, vec_enc); |
| break; |
| case T_BYTE: |
| case T_BOOLEAN: |
| vector_popcount_byte(dst, src, xtmp1, xtmp2, rtmp, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_popcount_integral_evex(BasicType bt, XMMRegister dst, XMMRegister src, |
| KRegister mask, bool merge, int vec_enc) { |
| assert(VM_Version::supports_avx512vl() || vec_enc == Assembler::AVX_512bit, ""); |
| switch(bt) { |
| case T_LONG: |
| assert(VM_Version::supports_avx512_vpopcntdq(), ""); |
| evpopcntq(dst, mask, src, merge, vec_enc); |
| break; |
| case T_INT: |
| assert(VM_Version::supports_avx512_vpopcntdq(), ""); |
| evpopcntd(dst, mask, src, merge, vec_enc); |
| break; |
| case T_CHAR: |
| case T_SHORT: |
| assert(VM_Version::supports_avx512_bitalg(), ""); |
| evpopcntw(dst, mask, src, merge, vec_enc); |
| break; |
| case T_BYTE: |
| case T_BOOLEAN: |
| assert(VM_Version::supports_avx512_bitalg(), ""); |
| evpopcntb(dst, mask, src, merge, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| } |
| |
| // Bit reversal algorithm first reverses the bits of each byte followed by |
| // a byte level reversal for multi-byte primitive types (short/int/long). |
| // Algorithm performs a lookup table access to get reverse bit sequence |
| // corresponding to a 4 bit value. Thus a reverse bit sequence for a byte |
| // is obtained by swapping the reverse bit sequences of upper and lower |
| // nibble of a byte. |
| void C2_MacroAssembler::vector_reverse_bit(BasicType bt, XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp, int vec_enc) { |
| if (VM_Version::supports_avx512vlbw()) { |
| |
| // Get the reverse bit sequence of lower nibble of each byte. |
| vmovdqu(xtmp1, ExternalAddress(StubRoutines::x86::vector_reverse_bit_lut()), vec_enc, noreg); |
| vbroadcast(T_INT, xtmp2, 0x0F0F0F0F, rtmp, vec_enc); |
| evpandq(dst, xtmp2, src, vec_enc); |
| vpshufb(dst, xtmp1, dst, vec_enc); |
| vpsllq(dst, dst, 4, vec_enc); |
| |
| // Get the reverse bit sequence of upper nibble of each byte. |
| vpandn(xtmp2, xtmp2, src, vec_enc); |
| vpsrlq(xtmp2, xtmp2, 4, vec_enc); |
| vpshufb(xtmp2, xtmp1, xtmp2, vec_enc); |
| |
| // Perform logical OR operation b/w left shifted reverse bit sequence of lower nibble and |
| // right shifted reverse bit sequence of upper nibble to obtain the reverse bit sequence of each byte. |
| evporq(xtmp2, dst, xtmp2, vec_enc); |
| vector_reverse_byte(bt, dst, xtmp2, vec_enc); |
| |
| } else if(vec_enc == Assembler::AVX_512bit) { |
| // Shift based bit reversal. |
| assert(bt == T_LONG || bt == T_INT, ""); |
| |
| // Swap lower and upper nibble of each byte. |
| vector_swap_nbits(4, 0x0F0F0F0F, xtmp1, src, xtmp2, rtmp, vec_enc); |
| |
| // Swap two least and most significant bits of each nibble. |
| vector_swap_nbits(2, 0x33333333, dst, xtmp1, xtmp2, rtmp, vec_enc); |
| |
| // Swap adjacent pair of bits. |
| evmovdqul(xtmp1, k0, dst, true, vec_enc); |
| vector_swap_nbits(1, 0x55555555, dst, xtmp1, xtmp2, rtmp, vec_enc); |
| |
| evmovdqul(xtmp1, k0, dst, true, vec_enc); |
| vector_reverse_byte64(bt, dst, xtmp1, xtmp1, xtmp2, rtmp, vec_enc); |
| } else { |
| vmovdqu(xtmp1, ExternalAddress(StubRoutines::x86::vector_reverse_bit_lut()), vec_enc, rtmp); |
| vbroadcast(T_INT, xtmp2, 0x0F0F0F0F, rtmp, vec_enc); |
| |
| // Get the reverse bit sequence of lower nibble of each byte. |
| vpand(dst, xtmp2, src, vec_enc); |
| vpshufb(dst, xtmp1, dst, vec_enc); |
| vpsllq(dst, dst, 4, vec_enc); |
| |
| // Get the reverse bit sequence of upper nibble of each byte. |
| vpandn(xtmp2, xtmp2, src, vec_enc); |
| vpsrlq(xtmp2, xtmp2, 4, vec_enc); |
| vpshufb(xtmp2, xtmp1, xtmp2, vec_enc); |
| |
| // Perform logical OR operation b/w left shifted reverse bit sequence of lower nibble and |
| // right shifted reverse bit sequence of upper nibble to obtain the reverse bit sequence of each byte. |
| vpor(xtmp2, dst, xtmp2, vec_enc); |
| vector_reverse_byte(bt, dst, xtmp2, vec_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_reverse_bit_gfni(BasicType bt, XMMRegister dst, XMMRegister src, AddressLiteral mask, int vec_enc, |
| XMMRegister xtmp, Register rscratch) { |
| assert(VM_Version::supports_gfni(), ""); |
| assert(rscratch != noreg || always_reachable(mask), "missing"); |
| |
| // Galois field instruction based bit reversal based on following algorithm. |
| // http://0x80.pl/articles/avx512-galois-field-for-bit-shuffling.html |
| vpbroadcastq(xtmp, mask, vec_enc, rscratch); |
| vgf2p8affineqb(xtmp, src, xtmp, 0, vec_enc); |
| vector_reverse_byte(bt, dst, xtmp, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_swap_nbits(int nbits, int bitmask, XMMRegister dst, XMMRegister src, |
| XMMRegister xtmp1, Register rtmp, int vec_enc) { |
| vbroadcast(T_INT, xtmp1, bitmask, rtmp, vec_enc); |
| evpandq(dst, xtmp1, src, vec_enc); |
| vpsllq(dst, dst, nbits, vec_enc); |
| vpandn(xtmp1, xtmp1, src, vec_enc); |
| vpsrlq(xtmp1, xtmp1, nbits, vec_enc); |
| evporq(dst, dst, xtmp1, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_reverse_byte64(BasicType bt, XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp, int vec_enc) { |
| // Shift based bit reversal. |
| assert(VM_Version::supports_evex(), ""); |
| switch(bt) { |
| case T_LONG: |
| // Swap upper and lower double word of each quad word. |
| evprorq(xtmp1, k0, src, 32, true, vec_enc); |
| evprord(xtmp1, k0, xtmp1, 16, true, vec_enc); |
| vector_swap_nbits(8, 0x00FF00FF, dst, xtmp1, xtmp2, rtmp, vec_enc); |
| break; |
| case T_INT: |
| // Swap upper and lower word of each double word. |
| evprord(xtmp1, k0, src, 16, true, vec_enc); |
| vector_swap_nbits(8, 0x00FF00FF, dst, xtmp1, xtmp2, rtmp, vec_enc); |
| break; |
| case T_CHAR: |
| case T_SHORT: |
| // Swap upper and lower byte of each word. |
| vector_swap_nbits(8, 0x00FF00FF, dst, src, xtmp2, rtmp, vec_enc); |
| break; |
| case T_BYTE: |
| evmovdquq(dst, k0, src, true, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_reverse_byte(BasicType bt, XMMRegister dst, XMMRegister src, int vec_enc) { |
| if (bt == T_BYTE) { |
| if (VM_Version::supports_avx512vl() || vec_enc == Assembler::AVX_512bit) { |
| evmovdquq(dst, k0, src, true, vec_enc); |
| } else { |
| vmovdqu(dst, src); |
| } |
| return; |
| } |
| // Perform byte reversal by shuffling the bytes of a multi-byte primitive type using |
| // pre-computed shuffle indices. |
| switch(bt) { |
| case T_LONG: |
| vmovdqu(dst, ExternalAddress(StubRoutines::x86::vector_reverse_byte_perm_mask_long()), vec_enc, noreg); |
| break; |
| case T_INT: |
| vmovdqu(dst, ExternalAddress(StubRoutines::x86::vector_reverse_byte_perm_mask_int()), vec_enc, noreg); |
| break; |
| case T_CHAR: |
| case T_SHORT: |
| vmovdqu(dst, ExternalAddress(StubRoutines::x86::vector_reverse_byte_perm_mask_short()), vec_enc, noreg); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| vpshufb(dst, src, dst, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_count_leading_zeros_evex(BasicType bt, XMMRegister dst, XMMRegister src, |
| XMMRegister xtmp1, XMMRegister xtmp2, XMMRegister xtmp3, |
| KRegister ktmp, Register rtmp, bool merge, int vec_enc) { |
| assert(is_integral_type(bt), ""); |
| assert(VM_Version::supports_avx512vl() || vec_enc == Assembler::AVX_512bit, ""); |
| assert(VM_Version::supports_avx512cd(), ""); |
| switch(bt) { |
| case T_LONG: |
| evplzcntq(dst, ktmp, src, merge, vec_enc); |
| break; |
| case T_INT: |
| evplzcntd(dst, ktmp, src, merge, vec_enc); |
| break; |
| case T_SHORT: |
| vpternlogd(xtmp1, 0xff, xtmp1, xtmp1, vec_enc); |
| vpunpcklwd(xtmp2, xtmp1, src, vec_enc); |
| evplzcntd(xtmp2, ktmp, xtmp2, merge, vec_enc); |
| vpunpckhwd(dst, xtmp1, src, vec_enc); |
| evplzcntd(dst, ktmp, dst, merge, vec_enc); |
| vpackusdw(dst, xtmp2, dst, vec_enc); |
| break; |
| case T_BYTE: |
| // T1 = Compute leading zero counts of 4 LSB bits of each byte by |
| // accessing the lookup table. |
| // T2 = Compute leading zero counts of 4 MSB bits of each byte by |
| // accessing the lookup table. |
| // Add T1 to T2 if 4 MSB bits of byte are all zeros. |
| assert(VM_Version::supports_avx512bw(), ""); |
| evmovdquq(xtmp1, ExternalAddress(StubRoutines::x86::vector_count_leading_zeros_lut()), vec_enc, rtmp); |
| vbroadcast(T_INT, dst, 0x0F0F0F0F, rtmp, vec_enc); |
| vpand(xtmp2, dst, src, vec_enc); |
| vpshufb(xtmp2, xtmp1, xtmp2, vec_enc); |
| vpsrlw(xtmp3, src, 4, vec_enc); |
| vpand(xtmp3, dst, xtmp3, vec_enc); |
| vpshufb(dst, xtmp1, xtmp3, vec_enc); |
| vpxor(xtmp1, xtmp1, xtmp1, vec_enc); |
| evpcmpeqb(ktmp, xtmp1, xtmp3, vec_enc); |
| evpaddb(dst, ktmp, dst, xtmp2, true, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_count_leading_zeros_byte_avx(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, Register rtmp, int vec_enc) { |
| vmovdqu(xtmp1, ExternalAddress(StubRoutines::x86::vector_count_leading_zeros_lut()), rtmp); |
| vbroadcast(T_INT, xtmp2, 0x0F0F0F0F, rtmp, vec_enc); |
| // T1 = Compute leading zero counts of 4 LSB bits of each byte by |
| // accessing the lookup table. |
| vpand(dst, xtmp2, src, vec_enc); |
| vpshufb(dst, xtmp1, dst, vec_enc); |
| // T2 = Compute leading zero counts of 4 MSB bits of each byte by |
| // accessing the lookup table. |
| vpsrlw(xtmp3, src, 4, vec_enc); |
| vpand(xtmp3, xtmp2, xtmp3, vec_enc); |
| vpshufb(xtmp2, xtmp1, xtmp3, vec_enc); |
| // Add T1 to T2 if 4 MSB bits of byte are all zeros. |
| vpxor(xtmp1, xtmp1, xtmp1, vec_enc); |
| vpcmpeqb(xtmp3, xtmp1, xtmp3, vec_enc); |
| vpaddb(dst, dst, xtmp2, vec_enc); |
| vpblendvb(dst, xtmp2, dst, xtmp3, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_count_leading_zeros_short_avx(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, Register rtmp, int vec_enc) { |
| vector_count_leading_zeros_byte_avx(dst, src, xtmp1, xtmp2, xtmp3, rtmp, vec_enc); |
| // Add zero counts of lower byte and upper byte of a word if |
| // upper byte holds a zero value. |
| vpsrlw(xtmp3, src, 8, vec_enc); |
| // xtmp1 is set to all zeros by vector_count_leading_zeros_byte_avx. |
| vpcmpeqw(xtmp3, xtmp1, xtmp3, vec_enc); |
| vpsllw(xtmp2, dst, 8, vec_enc); |
| vpaddw(xtmp2, xtmp2, dst, vec_enc); |
| vpblendvb(dst, dst, xtmp2, xtmp3, vec_enc); |
| vpsrlw(dst, dst, 8, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_count_leading_zeros_int_avx(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, int vec_enc) { |
| // Since IEEE 754 floating point format represents mantissa in 1.0 format |
| // hence biased exponent can be used to compute leading zero count as per |
| // following formula:- |
| // LZCNT = 31 - (biased_exp - 127) |
| // Special handling has been introduced for Zero, Max_Int and -ve source values. |
| |
| // Broadcast 0xFF |
| vpcmpeqd(xtmp1, xtmp1, xtmp1, vec_enc); |
| vpsrld(xtmp1, xtmp1, 24, vec_enc); |
| |
| // Remove the bit to the right of the highest set bit ensuring that the conversion to float cannot round up to a higher |
| // power of 2, which has a higher exponent than the input. This transformation is valid as only the highest set bit |
| // contributes to the leading number of zeros. |
| vpsrld(xtmp2, src, 1, vec_enc); |
| vpandn(xtmp3, xtmp2, src, vec_enc); |
| |
| // Extract biased exponent. |
| vcvtdq2ps(dst, xtmp3, vec_enc); |
| vpsrld(dst, dst, 23, vec_enc); |
| vpand(dst, dst, xtmp1, vec_enc); |
| |
| // Broadcast 127. |
| vpsrld(xtmp1, xtmp1, 1, vec_enc); |
| // Exponent = biased_exp - 127 |
| vpsubd(dst, dst, xtmp1, vec_enc); |
| |
| // Exponent_plus_one = Exponent + 1 |
| vpsrld(xtmp3, xtmp1, 6, vec_enc); |
| vpaddd(dst, dst, xtmp3, vec_enc); |
| |
| // Replace -ve exponent with zero, exponent is -ve when src |
| // lane contains a zero value. |
| vpxor(xtmp2, xtmp2, xtmp2, vec_enc); |
| vblendvps(dst, dst, xtmp2, dst, vec_enc); |
| |
| // Rematerialize broadcast 32. |
| vpslld(xtmp1, xtmp3, 5, vec_enc); |
| // Exponent is 32 if corresponding source lane contains max_int value. |
| vpcmpeqd(xtmp2, dst, xtmp1, vec_enc); |
| // LZCNT = 32 - exponent_plus_one |
| vpsubd(dst, xtmp1, dst, vec_enc); |
| |
| // Replace LZCNT with a value 1 if corresponding source lane |
| // contains max_int value. |
| vpblendvb(dst, dst, xtmp3, xtmp2, vec_enc); |
| |
| // Replace biased_exp with 0 if source lane value is less than zero. |
| vpxor(xtmp2, xtmp2, xtmp2, vec_enc); |
| vblendvps(dst, dst, xtmp2, src, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_count_leading_zeros_long_avx(XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, Register rtmp, int vec_enc) { |
| vector_count_leading_zeros_short_avx(dst, src, xtmp1, xtmp2, xtmp3, rtmp, vec_enc); |
| // Add zero counts of lower word and upper word of a double word if |
| // upper word holds a zero value. |
| vpsrld(xtmp3, src, 16, vec_enc); |
| // xtmp1 is set to all zeros by vector_count_leading_zeros_byte_avx. |
| vpcmpeqd(xtmp3, xtmp1, xtmp3, vec_enc); |
| vpslld(xtmp2, dst, 16, vec_enc); |
| vpaddd(xtmp2, xtmp2, dst, vec_enc); |
| vpblendvb(dst, dst, xtmp2, xtmp3, vec_enc); |
| vpsrld(dst, dst, 16, vec_enc); |
| // Add zero counts of lower doubleword and upper doubleword of a |
| // quadword if upper doubleword holds a zero value. |
| vpsrlq(xtmp3, src, 32, vec_enc); |
| vpcmpeqq(xtmp3, xtmp1, xtmp3, vec_enc); |
| vpsllq(xtmp2, dst, 32, vec_enc); |
| vpaddq(xtmp2, xtmp2, dst, vec_enc); |
| vpblendvb(dst, dst, xtmp2, xtmp3, vec_enc); |
| vpsrlq(dst, dst, 32, vec_enc); |
| } |
| |
| void C2_MacroAssembler::vector_count_leading_zeros_avx(BasicType bt, XMMRegister dst, XMMRegister src, |
| XMMRegister xtmp1, XMMRegister xtmp2, XMMRegister xtmp3, |
| Register rtmp, int vec_enc) { |
| assert(is_integral_type(bt), "unexpected type"); |
| assert(vec_enc < Assembler::AVX_512bit, ""); |
| switch(bt) { |
| case T_LONG: |
| vector_count_leading_zeros_long_avx(dst, src, xtmp1, xtmp2, xtmp3, rtmp, vec_enc); |
| break; |
| case T_INT: |
| vector_count_leading_zeros_int_avx(dst, src, xtmp1, xtmp2, xtmp3, vec_enc); |
| break; |
| case T_SHORT: |
| vector_count_leading_zeros_short_avx(dst, src, xtmp1, xtmp2, xtmp3, rtmp, vec_enc); |
| break; |
| case T_BYTE: |
| vector_count_leading_zeros_byte_avx(dst, src, xtmp1, xtmp2, xtmp3, rtmp, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vpsub(BasicType bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, int vec_enc) { |
| switch(bt) { |
| case T_BYTE: |
| vpsubb(dst, src1, src2, vec_enc); |
| break; |
| case T_SHORT: |
| vpsubw(dst, src1, src2, vec_enc); |
| break; |
| case T_INT: |
| vpsubd(dst, src1, src2, vec_enc); |
| break; |
| case T_LONG: |
| vpsubq(dst, src1, src2, vec_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(bt)); |
| break; |
| } |
| } |
| |
| // Trailing zero count computation is based on leading zero count operation as per |
| // following equation. All AVX3 targets support AVX512CD feature which offers |
| // direct vector instruction to compute leading zero count. |
| // CTZ = PRIM_TYPE_WIDHT - CLZ((x - 1) & ~x) |
| void C2_MacroAssembler::vector_count_trailing_zeros_evex(BasicType bt, XMMRegister dst, XMMRegister src, |
| XMMRegister xtmp1, XMMRegister xtmp2, XMMRegister xtmp3, |
| XMMRegister xtmp4, KRegister ktmp, Register rtmp, int vec_enc) { |
| assert(is_integral_type(bt), ""); |
| // xtmp = -1 |
| vpternlogd(xtmp4, 0xff, xtmp4, xtmp4, vec_enc); |
| // xtmp = xtmp + src |
| vpadd(bt, xtmp4, xtmp4, src, vec_enc); |
| // xtmp = xtmp & ~src |
| vpternlogd(xtmp4, 0x40, xtmp4, src, vec_enc); |
| vector_count_leading_zeros_evex(bt, dst, xtmp4, xtmp1, xtmp2, xtmp3, ktmp, rtmp, true, vec_enc); |
| vbroadcast(bt, xtmp4, 8 * type2aelembytes(bt), rtmp, vec_enc); |
| vpsub(bt, dst, xtmp4, dst, vec_enc); |
| } |
| |
| // Trailing zero count computation for AVX2 targets is based on popcount operation as per following equation |
| // CTZ = PRIM_TYPE_WIDHT - POPC(x | -x) |
| void C2_MacroAssembler::vector_count_trailing_zeros_avx(BasicType bt, XMMRegister dst, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, Register rtmp, int vec_enc) { |
| assert(is_integral_type(bt), ""); |
| // xtmp = 0 |
| vpxor(xtmp3 , xtmp3, xtmp3, vec_enc); |
| // xtmp = 0 - src |
| vpsub(bt, xtmp3, xtmp3, src, vec_enc); |
| // xtmp = xtmp | src |
| vpor(xtmp3, xtmp3, src, vec_enc); |
| vector_popcount_integral(bt, dst, xtmp3, xtmp1, xtmp2, rtmp, vec_enc); |
| vbroadcast(bt, xtmp1, 8 * type2aelembytes(bt), rtmp, vec_enc); |
| vpsub(bt, dst, xtmp1, dst, vec_enc); |
| } |
| |
| void C2_MacroAssembler::udivI(Register rax, Register divisor, Register rdx) { |
| Label done; |
| Label neg_divisor_fastpath; |
| cmpl(divisor, 0); |
| jccb(Assembler::less, neg_divisor_fastpath); |
| xorl(rdx, rdx); |
| divl(divisor); |
| jmpb(done); |
| bind(neg_divisor_fastpath); |
| // Fastpath for divisor < 0: |
| // quotient = (dividend & ~(dividend - divisor)) >>> (Integer.SIZE - 1) |
| // See Hacker's Delight (2nd ed), section 9.3 which is implemented in java.lang.Long.divideUnsigned() |
| movl(rdx, rax); |
| subl(rdx, divisor); |
| if (VM_Version::supports_bmi1()) { |
| andnl(rax, rdx, rax); |
| } else { |
| notl(rdx); |
| andl(rax, rdx); |
| } |
| shrl(rax, 31); |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::umodI(Register rax, Register divisor, Register rdx) { |
| Label done; |
| Label neg_divisor_fastpath; |
| cmpl(divisor, 0); |
| jccb(Assembler::less, neg_divisor_fastpath); |
| xorl(rdx, rdx); |
| divl(divisor); |
| jmpb(done); |
| bind(neg_divisor_fastpath); |
| // Fastpath when divisor < 0: |
| // remainder = dividend - (((dividend & ~(dividend - divisor)) >> (Integer.SIZE - 1)) & divisor) |
| // See Hacker's Delight (2nd ed), section 9.3 which is implemented in java.lang.Long.remainderUnsigned() |
| movl(rdx, rax); |
| subl(rax, divisor); |
| if (VM_Version::supports_bmi1()) { |
| andnl(rax, rax, rdx); |
| } else { |
| notl(rax); |
| andl(rax, rdx); |
| } |
| sarl(rax, 31); |
| andl(rax, divisor); |
| subl(rdx, rax); |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::udivmodI(Register rax, Register divisor, Register rdx, Register tmp) { |
| Label done; |
| Label neg_divisor_fastpath; |
| |
| cmpl(divisor, 0); |
| jccb(Assembler::less, neg_divisor_fastpath); |
| xorl(rdx, rdx); |
| divl(divisor); |
| jmpb(done); |
| bind(neg_divisor_fastpath); |
| // Fastpath for divisor < 0: |
| // quotient = (dividend & ~(dividend - divisor)) >>> (Integer.SIZE - 1) |
| // remainder = dividend - (((dividend & ~(dividend - divisor)) >> (Integer.SIZE - 1)) & divisor) |
| // See Hacker's Delight (2nd ed), section 9.3 which is implemented in |
| // java.lang.Long.divideUnsigned() and java.lang.Long.remainderUnsigned() |
| movl(rdx, rax); |
| subl(rax, divisor); |
| if (VM_Version::supports_bmi1()) { |
| andnl(rax, rax, rdx); |
| } else { |
| notl(rax); |
| andl(rax, rdx); |
| } |
| movl(tmp, rax); |
| shrl(rax, 31); // quotient |
| sarl(tmp, 31); |
| andl(tmp, divisor); |
| subl(rdx, tmp); // remainder |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::reverseI(Register dst, Register src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp) { |
| if(VM_Version::supports_gfni()) { |
| // Galois field instruction based bit reversal based on following algorithm. |
| // http://0x80.pl/articles/avx512-galois-field-for-bit-shuffling.html |
| mov64(rtmp, 0x8040201008040201L); |
| movq(xtmp1, src); |
| movq(xtmp2, rtmp); |
| gf2p8affineqb(xtmp1, xtmp2, 0); |
| movq(dst, xtmp1); |
| } else { |
| // Swap even and odd numbered bits. |
| movl(rtmp, src); |
| andl(rtmp, 0x55555555); |
| shll(rtmp, 1); |
| movl(dst, src); |
| andl(dst, 0xAAAAAAAA); |
| shrl(dst, 1); |
| orl(dst, rtmp); |
| |
| // Swap LSB and MSB 2 bits of each nibble. |
| movl(rtmp, dst); |
| andl(rtmp, 0x33333333); |
| shll(rtmp, 2); |
| andl(dst, 0xCCCCCCCC); |
| shrl(dst, 2); |
| orl(dst, rtmp); |
| |
| // Swap LSB and MSB 4 bits of each byte. |
| movl(rtmp, dst); |
| andl(rtmp, 0x0F0F0F0F); |
| shll(rtmp, 4); |
| andl(dst, 0xF0F0F0F0); |
| shrl(dst, 4); |
| orl(dst, rtmp); |
| } |
| bswapl(dst); |
| } |
| |
| void C2_MacroAssembler::reverseL(Register dst, Register src, XMMRegister xtmp1, |
| XMMRegister xtmp2, Register rtmp1, Register rtmp2) { |
| if(VM_Version::supports_gfni()) { |
| // Galois field instruction based bit reversal based on following algorithm. |
| // http://0x80.pl/articles/avx512-galois-field-for-bit-shuffling.html |
| mov64(rtmp1, 0x8040201008040201L); |
| movq(xtmp1, src); |
| movq(xtmp2, rtmp1); |
| gf2p8affineqb(xtmp1, xtmp2, 0); |
| movq(dst, xtmp1); |
| } else { |
| // Swap even and odd numbered bits. |
| movq(rtmp1, src); |
| mov64(rtmp2, 0x5555555555555555L); |
| andq(rtmp1, rtmp2); |
| shlq(rtmp1, 1); |
| movq(dst, src); |
| notq(rtmp2); |
| andq(dst, rtmp2); |
| shrq(dst, 1); |
| orq(dst, rtmp1); |
| |
| // Swap LSB and MSB 2 bits of each nibble. |
| movq(rtmp1, dst); |
| mov64(rtmp2, 0x3333333333333333L); |
| andq(rtmp1, rtmp2); |
| shlq(rtmp1, 2); |
| notq(rtmp2); |
| andq(dst, rtmp2); |
| shrq(dst, 2); |
| orq(dst, rtmp1); |
| |
| // Swap LSB and MSB 4 bits of each byte. |
| movq(rtmp1, dst); |
| mov64(rtmp2, 0x0F0F0F0F0F0F0F0FL); |
| andq(rtmp1, rtmp2); |
| shlq(rtmp1, 4); |
| notq(rtmp2); |
| andq(dst, rtmp2); |
| shrq(dst, 4); |
| orq(dst, rtmp1); |
| } |
| bswapq(dst); |
| } |
| |
| void C2_MacroAssembler::udivL(Register rax, Register divisor, Register rdx) { |
| Label done; |
| Label neg_divisor_fastpath; |
| cmpq(divisor, 0); |
| jccb(Assembler::less, neg_divisor_fastpath); |
| xorl(rdx, rdx); |
| divq(divisor); |
| jmpb(done); |
| bind(neg_divisor_fastpath); |
| // Fastpath for divisor < 0: |
| // quotient = (dividend & ~(dividend - divisor)) >>> (Long.SIZE - 1) |
| // See Hacker's Delight (2nd ed), section 9.3 which is implemented in java.lang.Long.divideUnsigned() |
| movq(rdx, rax); |
| subq(rdx, divisor); |
| if (VM_Version::supports_bmi1()) { |
| andnq(rax, rdx, rax); |
| } else { |
| notq(rdx); |
| andq(rax, rdx); |
| } |
| shrq(rax, 63); |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::umodL(Register rax, Register divisor, Register rdx) { |
| Label done; |
| Label neg_divisor_fastpath; |
| cmpq(divisor, 0); |
| jccb(Assembler::less, neg_divisor_fastpath); |
| xorq(rdx, rdx); |
| divq(divisor); |
| jmp(done); |
| bind(neg_divisor_fastpath); |
| // Fastpath when divisor < 0: |
| // remainder = dividend - (((dividend & ~(dividend - divisor)) >> (Long.SIZE - 1)) & divisor) |
| // See Hacker's Delight (2nd ed), section 9.3 which is implemented in java.lang.Long.remainderUnsigned() |
| movq(rdx, rax); |
| subq(rax, divisor); |
| if (VM_Version::supports_bmi1()) { |
| andnq(rax, rax, rdx); |
| } else { |
| notq(rax); |
| andq(rax, rdx); |
| } |
| sarq(rax, 63); |
| andq(rax, divisor); |
| subq(rdx, rax); |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::udivmodL(Register rax, Register divisor, Register rdx, Register tmp) { |
| Label done; |
| Label neg_divisor_fastpath; |
| cmpq(divisor, 0); |
| jccb(Assembler::less, neg_divisor_fastpath); |
| xorq(rdx, rdx); |
| divq(divisor); |
| jmp(done); |
| bind(neg_divisor_fastpath); |
| // Fastpath for divisor < 0: |
| // quotient = (dividend & ~(dividend - divisor)) >>> (Long.SIZE - 1) |
| // remainder = dividend - (((dividend & ~(dividend - divisor)) >> (Long.SIZE - 1)) & divisor) |
| // See Hacker's Delight (2nd ed), section 9.3 which is implemented in |
| // java.lang.Long.divideUnsigned() and java.lang.Long.remainderUnsigned() |
| movq(rdx, rax); |
| subq(rax, divisor); |
| if (VM_Version::supports_bmi1()) { |
| andnq(rax, rax, rdx); |
| } else { |
| notq(rax); |
| andq(rax, rdx); |
| } |
| movq(tmp, rax); |
| shrq(rax, 63); // quotient |
| sarq(tmp, 63); |
| andq(tmp, divisor); |
| subq(rdx, tmp); // remainder |
| bind(done); |
| } |
| |
| void C2_MacroAssembler::rearrange_bytes(XMMRegister dst, XMMRegister shuffle, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, XMMRegister xtmp3, Register rtmp, KRegister ktmp, |
| int vlen_enc) { |
| assert(VM_Version::supports_avx512bw(), ""); |
| // Byte shuffles are inlane operations and indices are determined using |
| // lower 4 bit of each shuffle lane, thus all shuffle indices are |
| // normalized to index range 0-15. This makes sure that all the multiples |
| // of an index value are placed at same relative position in 128 bit |
| // lane i.e. elements corresponding to shuffle indices 16, 32 and 64 |
| // will be 16th element in their respective 128 bit lanes. |
| movl(rtmp, 16); |
| evpbroadcastb(xtmp1, rtmp, vlen_enc); |
| |
| // Compute a mask for shuffle vector by comparing indices with expression INDEX < 16, |
| // Broadcast first 128 bit lane across entire vector, shuffle the vector lanes using |
| // original shuffle indices and move the shuffled lanes corresponding to true |
| // mask to destination vector. |
| evpcmpb(ktmp, k0, shuffle, xtmp1, Assembler::lt, true, vlen_enc); |
| evshufi64x2(xtmp2, src, src, 0x0, vlen_enc); |
| evpshufb(dst, ktmp, xtmp2, shuffle, false, vlen_enc); |
| |
| // Perform above steps with lane comparison expression as INDEX >= 16 && INDEX < 32 |
| // and broadcasting second 128 bit lane. |
| evpcmpb(ktmp, k0, shuffle, xtmp1, Assembler::nlt, true, vlen_enc); |
| vpsllq(xtmp2, xtmp1, 0x1, vlen_enc); |
| evpcmpb(ktmp, ktmp, shuffle, xtmp2, Assembler::lt, true, vlen_enc); |
| evshufi64x2(xtmp3, src, src, 0x55, vlen_enc); |
| evpshufb(dst, ktmp, xtmp3, shuffle, true, vlen_enc); |
| |
| // Perform above steps with lane comparison expression as INDEX >= 32 && INDEX < 48 |
| // and broadcasting third 128 bit lane. |
| evpcmpb(ktmp, k0, shuffle, xtmp2, Assembler::nlt, true, vlen_enc); |
| vpaddb(xtmp1, xtmp1, xtmp2, vlen_enc); |
| evpcmpb(ktmp, ktmp, shuffle, xtmp1, Assembler::lt, true, vlen_enc); |
| evshufi64x2(xtmp3, src, src, 0xAA, vlen_enc); |
| evpshufb(dst, ktmp, xtmp3, shuffle, true, vlen_enc); |
| |
| // Perform above steps with lane comparison expression as INDEX >= 48 && INDEX < 64 |
| // and broadcasting third 128 bit lane. |
| evpcmpb(ktmp, k0, shuffle, xtmp1, Assembler::nlt, true, vlen_enc); |
| vpsllq(xtmp2, xtmp2, 0x1, vlen_enc); |
| evpcmpb(ktmp, ktmp, shuffle, xtmp2, Assembler::lt, true, vlen_enc); |
| evshufi64x2(xtmp3, src, src, 0xFF, vlen_enc); |
| evpshufb(dst, ktmp, xtmp3, shuffle, true, vlen_enc); |
| } |
| |
| void C2_MacroAssembler::vector_rearrange_int_float(BasicType bt, XMMRegister dst, |
| XMMRegister shuffle, XMMRegister src, int vlen_enc) { |
| if (vlen_enc == AVX_128bit) { |
| vpermilps(dst, src, shuffle, vlen_enc); |
| } else if (bt == T_INT) { |
| vpermd(dst, shuffle, src, vlen_enc); |
| } else { |
| assert(bt == T_FLOAT, ""); |
| vpermps(dst, shuffle, src, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::efp16sh(int opcode, XMMRegister dst, XMMRegister src1, XMMRegister src2) { |
| switch(opcode) { |
| case Op_AddHF: vaddsh(dst, src1, src2); break; |
| case Op_SubHF: vsubsh(dst, src1, src2); break; |
| case Op_MulHF: vmulsh(dst, src1, src2); break; |
| case Op_DivHF: vdivsh(dst, src1, src2); break; |
| default: assert(false, "%s", NodeClassNames[opcode]); break; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_saturating_op(int ideal_opc, BasicType elem_bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, int vlen_enc) { |
| switch(elem_bt) { |
| case T_BYTE: |
| if (ideal_opc == Op_SaturatingAddV) { |
| vpaddsb(dst, src1, src2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| vpsubsb(dst, src1, src2, vlen_enc); |
| } |
| break; |
| case T_SHORT: |
| if (ideal_opc == Op_SaturatingAddV) { |
| vpaddsw(dst, src1, src2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| vpsubsw(dst, src1, src2, vlen_enc); |
| } |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_saturating_unsigned_op(int ideal_opc, BasicType elem_bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, int vlen_enc) { |
| switch(elem_bt) { |
| case T_BYTE: |
| if (ideal_opc == Op_SaturatingAddV) { |
| vpaddusb(dst, src1, src2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| vpsubusb(dst, src1, src2, vlen_enc); |
| } |
| break; |
| case T_SHORT: |
| if (ideal_opc == Op_SaturatingAddV) { |
| vpaddusw(dst, src1, src2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| vpsubusw(dst, src1, src2, vlen_enc); |
| } |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_sub_dq_saturating_unsigned_evex(BasicType elem_bt, XMMRegister dst, XMMRegister src1, |
| XMMRegister src2, KRegister ktmp, int vlen_enc) { |
| // For unsigned subtraction, overflow happens when magnitude of second input is greater than first input. |
| // overflow_mask = Inp1 <u Inp2 |
| evpcmpu(elem_bt, ktmp, src2, src1, Assembler::lt, vlen_enc); |
| // Res = overflow_mask ? Zero : INP1 - INP2 (non-commutative and non-associative) |
| evmasked_op(elem_bt == T_INT ? Op_SubVI : Op_SubVL, elem_bt, ktmp, dst, src1, src2, false, vlen_enc, false); |
| } |
| |
| void C2_MacroAssembler::vector_sub_dq_saturating_unsigned_avx(BasicType elem_bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, |
| XMMRegister xtmp1, XMMRegister xtmp2, int vlen_enc) { |
| // Emulate unsigned comparison using signed comparison |
| // Mask = Inp1 <u Inp2 => Inp1 + MIN_VALUE < Inp2 + MIN_VALUE |
| vpgenmin_value(elem_bt, xtmp1, xtmp1, vlen_enc, true); |
| vpadd(elem_bt, xtmp2, src1, xtmp1, vlen_enc); |
| vpadd(elem_bt, xtmp1, src2, xtmp1, vlen_enc); |
| |
| vpcmpgt(elem_bt, xtmp2, xtmp1, xtmp2, vlen_enc); |
| |
| // Res = INP1 - INP2 (non-commutative and non-associative) |
| vpsub(elem_bt, dst, src1, src2, vlen_enc); |
| // Res = Mask ? Zero : Res |
| vpxor(xtmp1, xtmp1, xtmp1, vlen_enc); |
| vpblendvb(dst, dst, xtmp1, xtmp2, vlen_enc); |
| } |
| |
| void C2_MacroAssembler::vector_add_dq_saturating_unsigned_evex(BasicType elem_bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, |
| XMMRegister xtmp1, XMMRegister xtmp2, KRegister ktmp, int vlen_enc) { |
| // Unsigned values ranges comprise of only +ve numbers, thus there exist only an upper bound saturation. |
| // overflow_mask = (SRC1 + SRC2) <u (SRC1 | SRC2) |
| // Res = Signed Add INP1, INP2 |
| vpadd(elem_bt, dst, src1, src2, vlen_enc); |
| // T1 = SRC1 | SRC2 |
| vpor(xtmp1, src1, src2, vlen_enc); |
| // Max_Unsigned = -1 |
| vpternlogd(xtmp2, 0xff, xtmp2, xtmp2, vlen_enc); |
| // Unsigned compare: Mask = Res <u T1 |
| evpcmpu(elem_bt, ktmp, dst, xtmp1, Assembler::lt, vlen_enc); |
| // res = Mask ? Max_Unsigned : Res |
| evpblend(elem_bt, dst, ktmp, dst, xtmp2, true, vlen_enc); |
| } |
| |
| // |
| // Section 2-13 Hacker's Delight list following overflow detection check for saturating |
| // unsigned addition operation. |
| // overflow_mask = ((a & b) | ((a | b) & ~( a + b))) >>> 31 == 1 |
| // |
| // We empirically determined its semantic equivalence to following reduced expression |
| // overflow_mask = (a + b) <u (a | b) |
| // |
| // and also verified it though Alive2 solver. |
| // (https://alive2.llvm.org/ce/z/XDQ7dY) |
| // |
| |
| void C2_MacroAssembler::vector_add_dq_saturating_unsigned_avx(BasicType elem_bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, |
| XMMRegister xtmp1, XMMRegister xtmp2, XMMRegister xtmp3, int vlen_enc) { |
| // Res = Signed Add INP1, INP2 |
| vpadd(elem_bt, dst, src1, src2, vlen_enc); |
| // Compute T1 = INP1 | INP2 |
| vpor(xtmp3, src1, src2, vlen_enc); |
| // T1 = Minimum signed value. |
| vpgenmin_value(elem_bt, xtmp2, xtmp1, vlen_enc, true); |
| // Convert T1 to signed value, T1 = T1 + MIN_VALUE |
| vpadd(elem_bt, xtmp3, xtmp3, xtmp2, vlen_enc); |
| // Convert Res to signed value, Res<s> = Res + MIN_VALUE |
| vpadd(elem_bt, xtmp2, xtmp2, dst, vlen_enc); |
| // Compute overflow detection mask = Res<1> <s T1 |
| if (elem_bt == T_INT) { |
| vpcmpgtd(xtmp3, xtmp3, xtmp2, vlen_enc); |
| } else { |
| assert(elem_bt == T_LONG, ""); |
| vpcmpgtq(xtmp3, xtmp3, xtmp2, vlen_enc); |
| } |
| vpblendvb(dst, dst, xtmp1, xtmp3, vlen_enc); |
| } |
| |
| void C2_MacroAssembler::evpmovq2m_emu(KRegister ktmp, XMMRegister src, XMMRegister xtmp1, XMMRegister xtmp2, |
| int vlen_enc, bool xtmp2_hold_M1) { |
| if (VM_Version::supports_avx512dq()) { |
| evpmovq2m(ktmp, src, vlen_enc); |
| } else { |
| assert(VM_Version::supports_evex(), ""); |
| if (!xtmp2_hold_M1) { |
| vpternlogq(xtmp2, 0xff, xtmp2, xtmp2, vlen_enc); |
| } |
| evpsraq(xtmp1, src, 63, vlen_enc); |
| evpcmpeqq(ktmp, k0, xtmp1, xtmp2, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::evpmovd2m_emu(KRegister ktmp, XMMRegister src, XMMRegister xtmp1, XMMRegister xtmp2, |
| int vlen_enc, bool xtmp2_hold_M1) { |
| if (VM_Version::supports_avx512dq()) { |
| evpmovd2m(ktmp, src, vlen_enc); |
| } else { |
| assert(VM_Version::supports_evex(), ""); |
| if (!xtmp2_hold_M1) { |
| vpternlogd(xtmp2, 0xff, xtmp2, xtmp2, vlen_enc); |
| } |
| vpsrad(xtmp1, src, 31, vlen_enc); |
| Assembler::evpcmpeqd(ktmp, k0, xtmp1, xtmp2, vlen_enc); |
| } |
| } |
| |
| |
| void C2_MacroAssembler::vpsign_extend_dq(BasicType elem_bt, XMMRegister dst, XMMRegister src, int vlen_enc) { |
| if (elem_bt == T_LONG) { |
| if (VM_Version::supports_evex()) { |
| evpsraq(dst, src, 63, vlen_enc); |
| } else { |
| vpsrad(dst, src, 31, vlen_enc); |
| vpshufd(dst, dst, 0xF5, vlen_enc); |
| } |
| } else { |
| assert(elem_bt == T_INT, ""); |
| vpsrad(dst, src, 31, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::vpgenmax_value(BasicType elem_bt, XMMRegister dst, XMMRegister allones, int vlen_enc, bool compute_allones) { |
| if (compute_allones) { |
| if (VM_Version::supports_avx512vl() || vlen_enc == Assembler::AVX_512bit) { |
| vpternlogd(allones, 0xff, allones, allones, vlen_enc); |
| } else { |
| vpcmpeqq(allones, allones, allones, vlen_enc); |
| } |
| } |
| if (elem_bt == T_LONG) { |
| vpsrlq(dst, allones, 1, vlen_enc); |
| } else { |
| assert(elem_bt == T_INT, ""); |
| vpsrld(dst, allones, 1, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::vpgenmin_value(BasicType elem_bt, XMMRegister dst, XMMRegister allones, int vlen_enc, bool compute_allones) { |
| if (compute_allones) { |
| if (VM_Version::supports_avx512vl() || vlen_enc == Assembler::AVX_512bit) { |
| vpternlogd(allones, 0xff, allones, allones, vlen_enc); |
| } else { |
| vpcmpeqq(allones, allones, allones, vlen_enc); |
| } |
| } |
| if (elem_bt == T_LONG) { |
| vpsllq(dst, allones, 63, vlen_enc); |
| } else { |
| assert(elem_bt == T_INT, ""); |
| vpslld(dst, allones, 31, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::evpcmpu(BasicType elem_bt, KRegister kmask, XMMRegister src1, XMMRegister src2, |
| Assembler::ComparisonPredicate cond, int vlen_enc) { |
| switch(elem_bt) { |
| case T_LONG: evpcmpuq(kmask, src1, src2, cond, vlen_enc); break; |
| case T_INT: evpcmpud(kmask, src1, src2, cond, vlen_enc); break; |
| case T_SHORT: evpcmpuw(kmask, src1, src2, cond, vlen_enc); break; |
| case T_BYTE: evpcmpub(kmask, src1, src2, cond, vlen_enc); break; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); break; |
| } |
| } |
| |
| void C2_MacroAssembler::vpcmpgt(BasicType elem_bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, int vlen_enc) { |
| switch(elem_bt) { |
| case T_LONG: vpcmpgtq(dst, src1, src2, vlen_enc); break; |
| case T_INT: vpcmpgtd(dst, src1, src2, vlen_enc); break; |
| case T_SHORT: vpcmpgtw(dst, src1, src2, vlen_enc); break; |
| case T_BYTE: vpcmpgtb(dst, src1, src2, vlen_enc); break; |
| default: fatal("Unsupported type %s", type2name(elem_bt)); break; |
| } |
| } |
| |
| void C2_MacroAssembler::evpmov_vec_to_mask(BasicType elem_bt, KRegister ktmp, XMMRegister src, XMMRegister xtmp1, |
| XMMRegister xtmp2, int vlen_enc, bool xtmp2_hold_M1) { |
| if (elem_bt == T_LONG) { |
| evpmovq2m_emu(ktmp, src, xtmp1, xtmp2, vlen_enc, xtmp2_hold_M1); |
| } else { |
| assert(elem_bt == T_INT, ""); |
| evpmovd2m_emu(ktmp, src, xtmp1, xtmp2, vlen_enc, xtmp2_hold_M1); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_addsub_dq_saturating_evex(int ideal_opc, BasicType elem_bt, XMMRegister dst, XMMRegister src1, |
| XMMRegister src2, XMMRegister xtmp1, XMMRegister xtmp2, |
| KRegister ktmp1, KRegister ktmp2, int vlen_enc) { |
| assert(elem_bt == T_INT || elem_bt == T_LONG, ""); |
| // Addition/Subtraction happens over two's compliment representation of numbers and is agnostic to signed'ness. |
| // Overflow detection based on Hacker's delight section 2-13. |
| if (ideal_opc == Op_SaturatingAddV) { |
| // res = src1 + src2 |
| vpadd(elem_bt, dst, src1, src2, vlen_enc); |
| // Overflow occurs if result polarity does not comply with equivalent polarity inputs. |
| // overflow = (((res ^ src1) & (res ^ src2)) >>> 31(I)/63(L)) == 1 |
| vpxor(xtmp1, dst, src1, vlen_enc); |
| vpxor(xtmp2, dst, src2, vlen_enc); |
| vpand(xtmp2, xtmp1, xtmp2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| // res = src1 - src2 |
| vpsub(elem_bt, dst, src1, src2, vlen_enc); |
| // Overflow occurs when both inputs have opposite polarity and |
| // result polarity does not comply with first input polarity. |
| // overflow = ((src1 ^ src2) & (res ^ src1) >>> 31(I)/63(L)) == 1; |
| vpxor(xtmp1, src1, src2, vlen_enc); |
| vpxor(xtmp2, dst, src1, vlen_enc); |
| vpand(xtmp2, xtmp1, xtmp2, vlen_enc); |
| } |
| |
| // Compute overflow detection mask. |
| evpmov_vec_to_mask(elem_bt, ktmp1, xtmp2, xtmp2, xtmp1, vlen_enc); |
| // Note: xtmp1 hold -1 in all its lanes after above call. |
| |
| // Compute mask based on first input polarity. |
| evpmov_vec_to_mask(elem_bt, ktmp2, src1, xtmp2, xtmp1, vlen_enc, true); |
| |
| vpgenmax_value(elem_bt, xtmp2, xtmp1, vlen_enc, true); |
| vpgenmin_value(elem_bt, xtmp1, xtmp1, vlen_enc); |
| |
| // Compose a vector of saturating (MAX/MIN) values, where lanes corresponding to |
| // set bits in first input polarity mask holds a min value. |
| evpblend(elem_bt, xtmp2, ktmp2, xtmp2, xtmp1, true, vlen_enc); |
| // Blend destination lanes with saturated values using overflow detection mask. |
| evpblend(elem_bt, dst, ktmp1, dst, xtmp2, true, vlen_enc); |
| } |
| |
| |
| void C2_MacroAssembler::vector_addsub_dq_saturating_avx(int ideal_opc, BasicType elem_bt, XMMRegister dst, XMMRegister src1, |
| XMMRegister src2, XMMRegister xtmp1, XMMRegister xtmp2, |
| XMMRegister xtmp3, XMMRegister xtmp4, int vlen_enc) { |
| assert(elem_bt == T_INT || elem_bt == T_LONG, ""); |
| // Addition/Subtraction happens over two's compliment representation of numbers and is agnostic to signed'ness. |
| // Overflow detection based on Hacker's delight section 2-13. |
| if (ideal_opc == Op_SaturatingAddV) { |
| // res = src1 + src2 |
| vpadd(elem_bt, dst, src1, src2, vlen_enc); |
| // Overflow occurs if result polarity does not comply with equivalent polarity inputs. |
| // overflow = (((res ^ src1) & (res ^ src2)) >>> 31(I)/63(L)) == 1 |
| vpxor(xtmp1, dst, src1, vlen_enc); |
| vpxor(xtmp2, dst, src2, vlen_enc); |
| vpand(xtmp2, xtmp1, xtmp2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| // res = src1 - src2 |
| vpsub(elem_bt, dst, src1, src2, vlen_enc); |
| // Overflow occurs when both inputs have opposite polarity and |
| // result polarity does not comply with first input polarity. |
| // overflow = ((src1 ^ src2) & (res ^ src1) >>> 31(I)/63(L)) == 1; |
| vpxor(xtmp1, src1, src2, vlen_enc); |
| vpxor(xtmp2, dst, src1, vlen_enc); |
| vpand(xtmp2, xtmp1, xtmp2, vlen_enc); |
| } |
| |
| // Sign-extend to compute overflow detection mask. |
| vpsign_extend_dq(elem_bt, xtmp3, xtmp2, vlen_enc); |
| |
| vpcmpeqd(xtmp1, xtmp1, xtmp1, vlen_enc); |
| vpgenmax_value(elem_bt, xtmp2, xtmp1, vlen_enc); |
| vpgenmin_value(elem_bt, xtmp1, xtmp1, vlen_enc); |
| |
| // Compose saturating min/max vector using first input polarity mask. |
| vpsign_extend_dq(elem_bt, xtmp4, src1, vlen_enc); |
| vpblendvb(xtmp1, xtmp2, xtmp1, xtmp4, vlen_enc); |
| |
| // Blend result with saturating vector using overflow detection mask. |
| vpblendvb(dst, dst, xtmp1, xtmp3, vlen_enc); |
| } |
| |
| void C2_MacroAssembler::vector_saturating_op(int ideal_opc, BasicType elem_bt, XMMRegister dst, XMMRegister src1, Address src2, int vlen_enc) { |
| switch(elem_bt) { |
| case T_BYTE: |
| if (ideal_opc == Op_SaturatingAddV) { |
| vpaddsb(dst, src1, src2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| vpsubsb(dst, src1, src2, vlen_enc); |
| } |
| break; |
| case T_SHORT: |
| if (ideal_opc == Op_SaturatingAddV) { |
| vpaddsw(dst, src1, src2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| vpsubsw(dst, src1, src2, vlen_enc); |
| } |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_saturating_unsigned_op(int ideal_opc, BasicType elem_bt, XMMRegister dst, XMMRegister src1, Address src2, int vlen_enc) { |
| switch(elem_bt) { |
| case T_BYTE: |
| if (ideal_opc == Op_SaturatingAddV) { |
| vpaddusb(dst, src1, src2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| vpsubusb(dst, src1, src2, vlen_enc); |
| } |
| break; |
| case T_SHORT: |
| if (ideal_opc == Op_SaturatingAddV) { |
| vpaddusw(dst, src1, src2, vlen_enc); |
| } else { |
| assert(ideal_opc == Op_SaturatingSubV, ""); |
| vpsubusw(dst, src1, src2, vlen_enc); |
| } |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::select_from_two_vectors_evex(BasicType elem_bt, XMMRegister dst, XMMRegister src1, |
| XMMRegister src2, int vlen_enc) { |
| switch(elem_bt) { |
| case T_BYTE: |
| evpermi2b(dst, src1, src2, vlen_enc); |
| break; |
| case T_SHORT: |
| evpermi2w(dst, src1, src2, vlen_enc); |
| break; |
| case T_INT: |
| evpermi2d(dst, src1, src2, vlen_enc); |
| break; |
| case T_LONG: |
| evpermi2q(dst, src1, src2, vlen_enc); |
| break; |
| case T_FLOAT: |
| evpermi2ps(dst, src1, src2, vlen_enc); |
| break; |
| case T_DOUBLE: |
| evpermi2pd(dst, src1, src2, vlen_enc); |
| break; |
| default: |
| fatal("Unsupported type %s", type2name(elem_bt)); |
| break; |
| } |
| } |
| |
| void C2_MacroAssembler::vector_saturating_op(int ideal_opc, BasicType elem_bt, XMMRegister dst, XMMRegister src1, XMMRegister src2, bool is_unsigned, int vlen_enc) { |
| if (is_unsigned) { |
| vector_saturating_unsigned_op(ideal_opc, elem_bt, dst, src1, src2, vlen_enc); |
| } else { |
| vector_saturating_op(ideal_opc, elem_bt, dst, src1, src2, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::vector_saturating_op(int ideal_opc, BasicType elem_bt, XMMRegister dst, XMMRegister src1, Address src2, bool is_unsigned, int vlen_enc) { |
| if (is_unsigned) { |
| vector_saturating_unsigned_op(ideal_opc, elem_bt, dst, src1, src2, vlen_enc); |
| } else { |
| vector_saturating_op(ideal_opc, elem_bt, dst, src1, src2, vlen_enc); |
| } |
| } |
| |
| void C2_MacroAssembler::evfp16ph(int opcode, XMMRegister dst, XMMRegister src1, XMMRegister src2, int vlen_enc) { |
| switch(opcode) { |
| case Op_AddVHF: evaddph(dst, src1, src2, vlen_enc); break; |
| case Op_SubVHF: evsubph(dst, src1, src2, vlen_enc); break; |
| case Op_MulVHF: evmulph(dst, src1, src2, vlen_enc); break; |
| case Op_DivVHF: evdivph(dst, src1, src2, vlen_enc); break; |
| default: assert(false, "%s", NodeClassNames[opcode]); break; |
| } |
| } |
| |
| void C2_MacroAssembler::evfp16ph(int opcode, XMMRegister dst, XMMRegister src1, Address src2, int vlen_enc) { |
| switch(opcode) { |
| case Op_AddVHF: evaddph(dst, src1, src2, vlen_enc); break; |
| case Op_SubVHF: evsubph(dst, src1, src2, vlen_enc); break; |
| case Op_MulVHF: evmulph(dst, src1, src2, vlen_enc); break; |
| case Op_DivVHF: evdivph(dst, src1, src2, vlen_enc); break; |
| default: assert(false, "%s", NodeClassNames[opcode]); break; |
| } |
| } |
| |
| void C2_MacroAssembler::scalar_max_min_fp16(int opcode, XMMRegister dst, XMMRegister src1, XMMRegister src2, |
| KRegister ktmp, XMMRegister xtmp1, XMMRegister xtmp2) { |
| vector_max_min_fp16(opcode, dst, src1, src2, ktmp, xtmp1, xtmp2, Assembler::AVX_128bit); |
| } |
| |
| void C2_MacroAssembler::vector_max_min_fp16(int opcode, XMMRegister dst, XMMRegister src1, XMMRegister src2, |
| KRegister ktmp, XMMRegister xtmp1, XMMRegister xtmp2, int vlen_enc) { |
| if (opcode == Op_MaxVHF || opcode == Op_MaxHF) { |
| // Move sign bits of src2 to mask register. |
| evpmovw2m(ktmp, src2, vlen_enc); |
| // xtmp1 = src2 < 0 ? src2 : src1 |
| evpblendmw(xtmp1, ktmp, src1, src2, true, vlen_enc); |
| // xtmp2 = src2 < 0 ? ? src1 : src2 |
| evpblendmw(xtmp2, ktmp, src2, src1, true, vlen_enc); |
| // Idea behind above swapping is to make seconds source operand a +ve value. |
| // As per instruction semantic, if the values being compared are both 0.0s (of either sign), the value in |
| // the second source operand is returned. If only one value is a NaN (SNaN or QNaN) for this instruction, |
| // the second source operand, either a NaN or a valid floating-point value, is returned |
| // dst = max(xtmp1, xtmp2) |
| evmaxph(dst, xtmp1, xtmp2, vlen_enc); |
| // isNaN = is_unordered_quiet(xtmp1) |
| evcmpph(ktmp, k0, xtmp1, xtmp1, Assembler::UNORD_Q, vlen_enc); |
| // Final result is same as first source if its a NaN value, |
| // in case second operand holds a NaN value then as per above semantics |
| // result is same as second operand. |
| Assembler::evmovdquw(dst, ktmp, xtmp1, true, vlen_enc); |
| } else { |
| assert(opcode == Op_MinVHF || opcode == Op_MinHF, ""); |
| // Move sign bits of src1 to mask register. |
| evpmovw2m(ktmp, src1, vlen_enc); |
| // xtmp1 = src1 < 0 ? src2 : src1 |
| evpblendmw(xtmp1, ktmp, src1, src2, true, vlen_enc); |
| // xtmp2 = src1 < 0 ? src1 : src2 |
| evpblendmw(xtmp2, ktmp, src2, src1, true, vlen_enc); |
| // Idea behind above swapping is to make seconds source operand a -ve value. |
| // As per instruction semantics, if the values being compared are both 0.0s (of either sign), the value in |
| // the second source operand is returned. |
| // If only one value is a NaN (SNaN or QNaN) for this instruction, the second source operand, either a NaN |
| // or a valid floating-point value, is written to the result. |
| // dst = min(xtmp1, xtmp2) |
| evminph(dst, xtmp1, xtmp2, vlen_enc); |
| // isNaN = is_unordered_quiet(xtmp1) |
| evcmpph(ktmp, k0, xtmp1, xtmp1, Assembler::UNORD_Q, vlen_enc); |
| // Final result is same as first source if its a NaN value, |
| // in case second operand holds a NaN value then as per above semantics |
| // result is same as second operand. |
| Assembler::evmovdquw(dst, ktmp, xtmp1, true, vlen_enc); |
| } |
| } |