| /**************************************************************************** |
| ** |
| ** Copyright (C) 2016 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the examples of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:BSD$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** BSD License Usage |
| ** Alternatively, you may use this file under the terms of the BSD license |
| ** as follows: |
| ** |
| ** "Redistribution and use in source and binary forms, with or without |
| ** modification, are permitted provided that the following conditions are |
| ** met: |
| ** * Redistributions of source code must retain the above copyright |
| ** notice, this list of conditions and the following disclaimer. |
| ** * Redistributions in binary form must reproduce the above copyright |
| ** notice, this list of conditions and the following disclaimer in |
| ** the documentation and/or other materials provided with the |
| ** distribution. |
| ** * Neither the name of The Qt Company Ltd nor the names of its |
| ** contributors may be used to endorse or promote products derived |
| ** from this software without specific prior written permission. |
| ** |
| ** |
| ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| #include "mainwindow.h" |
| #include "imagemodel.h" |
| #include "pixeldelegate.h" |
| |
| #include <QtWidgets> |
| #if defined(QT_PRINTSUPPORT_LIB) |
| #include <QtPrintSupport/qtprintsupportglobal.h> |
| #if QT_CONFIG(printdialog) |
| #include <QPrinter> |
| #include <QPrintDialog> |
| #endif |
| #endif |
| |
| //! [0] |
| MainWindow::MainWindow() |
| { |
| //! [0] |
| currentPath = QDir::homePath(); |
| model = new ImageModel(this); |
| |
| QWidget *centralWidget = new QWidget; |
| |
| //! [1] |
| view = new QTableView; |
| view->setShowGrid(false); |
| view->horizontalHeader()->hide(); |
| view->verticalHeader()->hide(); |
| view->horizontalHeader()->setMinimumSectionSize(1); |
| view->verticalHeader()->setMinimumSectionSize(1); |
| view->setModel(model); |
| //! [1] |
| |
| //! [2] |
| PixelDelegate *delegate = new PixelDelegate(this); |
| view->setItemDelegate(delegate); |
| //! [2] |
| |
| //! [3] |
| QLabel *pixelSizeLabel = new QLabel(tr("Pixel size:")); |
| QSpinBox *pixelSizeSpinBox = new QSpinBox; |
| pixelSizeSpinBox->setMinimum(4); |
| pixelSizeSpinBox->setMaximum(32); |
| pixelSizeSpinBox->setValue(12); |
| //! [3] |
| |
| QMenu *fileMenu = new QMenu(tr("&File"), this); |
| QAction *openAction = fileMenu->addAction(tr("&Open...")); |
| openAction->setShortcuts(QKeySequence::Open); |
| |
| printAction = fileMenu->addAction(tr("&Print...")); |
| printAction->setEnabled(false); |
| printAction->setShortcut(QKeySequence::Print); |
| |
| QAction *quitAction = fileMenu->addAction(tr("E&xit")); |
| quitAction->setShortcuts(QKeySequence::Quit); |
| |
| QMenu *helpMenu = new QMenu(tr("&Help"), this); |
| QAction *aboutAction = helpMenu->addAction(tr("&About")); |
| |
| menuBar()->addMenu(fileMenu); |
| menuBar()->addSeparator(); |
| menuBar()->addMenu(helpMenu); |
| |
| connect(openAction, &QAction::triggered, this, &MainWindow::chooseImage); |
| connect(printAction, &QAction::triggered, this, &MainWindow::printImage); |
| connect(quitAction, &QAction::triggered, qApp, &QCoreApplication::quit); |
| connect(aboutAction, &QAction::triggered, this, &MainWindow::showAboutBox); |
| //! [4] |
| connect(pixelSizeSpinBox, QOverload<int>::of(&QSpinBox::valueChanged), |
| delegate, &PixelDelegate::setPixelSize); |
| connect(pixelSizeSpinBox, QOverload<int>::of(&QSpinBox::valueChanged), |
| this, &MainWindow::updateView); |
| //! [4] |
| |
| QHBoxLayout *controlsLayout = new QHBoxLayout; |
| controlsLayout->addWidget(pixelSizeLabel); |
| controlsLayout->addWidget(pixelSizeSpinBox); |
| controlsLayout->addStretch(1); |
| |
| QVBoxLayout *mainLayout = new QVBoxLayout; |
| mainLayout->addWidget(view); |
| mainLayout->addLayout(controlsLayout); |
| centralWidget->setLayout(mainLayout); |
| |
| setCentralWidget(centralWidget); |
| |
| setWindowTitle(tr("Pixelator")); |
| resize(640, 480); |
| //! [5] |
| } |
| //! [5] |
| |
| void MainWindow::chooseImage() |
| { |
| QString fileName = QFileDialog::getOpenFileName(this, |
| tr("Choose an image"), currentPath, "*"); |
| |
| if (!fileName.isEmpty()) |
| openImage(fileName); |
| } |
| |
| void MainWindow::openImage(const QString &fileName) |
| { |
| QImage image; |
| |
| if (image.load(fileName)) { |
| model->setImage(image); |
| if (!fileName.startsWith(":/")) { |
| currentPath = fileName; |
| setWindowTitle(tr("%1 - Pixelator").arg(currentPath)); |
| } |
| |
| printAction->setEnabled(true); |
| updateView(); |
| } |
| } |
| |
| void MainWindow::printImage() |
| { |
| #if QT_CONFIG(printdialog) |
| if (model->rowCount(QModelIndex())*model->columnCount(QModelIndex()) > 90000) { |
| QMessageBox::StandardButton answer; |
| answer = QMessageBox::question(this, tr("Large Image Size"), |
| tr("The printed image may be very large. Are you sure that " |
| "you want to print it?"), |
| QMessageBox::Yes | QMessageBox::No); |
| if (answer == QMessageBox::No) |
| return; |
| } |
| |
| QPrinter printer(QPrinter::HighResolution); |
| |
| QPrintDialog dlg(&printer, this); |
| dlg.setWindowTitle(tr("Print Image")); |
| |
| if (dlg.exec() != QDialog::Accepted) { |
| return; |
| } |
| |
| QPainter painter; |
| painter.begin(&printer); |
| |
| int rows = model->rowCount(QModelIndex()); |
| int columns = model->columnCount(QModelIndex()); |
| int sourceWidth = (columns + 1) * ItemSize; |
| int sourceHeight = (rows + 1) * ItemSize; |
| |
| painter.save(); |
| |
| double xscale = printer.pageRect().width() / double(sourceWidth); |
| double yscale = printer.pageRect().height() / double(sourceHeight); |
| double scale = qMin(xscale, yscale); |
| |
| painter.translate(printer.paperRect().x() + printer.pageRect().width() / 2, |
| printer.paperRect().y() + printer.pageRect().height() / 2); |
| painter.scale(scale, scale); |
| painter.translate(-sourceWidth / 2, -sourceHeight / 2); |
| |
| QStyleOptionViewItem option; |
| QModelIndex parent = QModelIndex(); |
| |
| QProgressDialog progress(tr("Printing..."), tr("Cancel"), 0, rows, this); |
| progress.setWindowModality(Qt::ApplicationModal); |
| float y = ItemSize / 2; |
| |
| for (int row = 0; row < rows; ++row) { |
| progress.setValue(row); |
| qApp->processEvents(); |
| if (progress.wasCanceled()) |
| break; |
| |
| float x = ItemSize / 2; |
| |
| for (int column = 0; column < columns; ++column) { |
| option.rect = QRect(int(x), int(y), ItemSize, ItemSize); |
| view->itemDelegate()->paint(&painter, option, |
| model->index(row, column, parent)); |
| x = x + ItemSize; |
| } |
| y = y + ItemSize; |
| } |
| progress.setValue(rows); |
| |
| painter.restore(); |
| painter.end(); |
| |
| if (progress.wasCanceled()) { |
| QMessageBox::information(this, tr("Printing canceled"), |
| tr("The printing process was canceled."), QMessageBox::Cancel); |
| } |
| #else |
| QMessageBox::information(this, tr("Printing canceled"), |
| tr("Printing is not supported on this Qt build"), QMessageBox::Cancel); |
| #endif |
| } |
| |
| void MainWindow::showAboutBox() |
| { |
| QMessageBox::about(this, tr("About the Pixelator example"), |
| tr("This example demonstrates how a standard view and a custom\n" |
| "delegate can be used to produce a specialized representation\n" |
| "of data in a simple custom model.")); |
| } |
| |
| //! [6] |
| void MainWindow::updateView() |
| { |
| view->resizeColumnsToContents(); |
| view->resizeRowsToContents(); |
| } |
| //! [6] |