| #! /bin/sh |
| ############################################################################# |
| ## |
| ## Copyright (C) 2016 Klarälvdalens Datakonsult AB, a KDAB Group company, info@kdab.com, author Giuseppe D'Angelo <giuseppe.dangelo@kdab.com> |
| ## Contact: https://www.qt.io/licensing/ |
| ## |
| ## This file is the build configuration utility of the Qt Toolkit. |
| ## |
| ## $QT_BEGIN_LICENSE:LGPL$ |
| ## Commercial License Usage |
| ## Licensees holding valid commercial Qt licenses may use this file in |
| ## accordance with the commercial license agreement provided with the |
| ## Software or, alternatively, in accordance with the terms contained in |
| ## a written agreement between you and The Qt Company. For licensing terms |
| ## and conditions see https://www.qt.io/terms-conditions. For further |
| ## information use the contact form at https://www.qt.io/contact-us. |
| ## |
| ## GNU Lesser General Public License Usage |
| ## Alternatively, this file may be used under the terms of the GNU Lesser |
| ## General Public License version 3 as published by the Free Software |
| ## Foundation and appearing in the file LICENSE.LGPL3 included in the |
| ## packaging of this file. Please review the following information to |
| ## ensure the GNU Lesser General Public License version 3 requirements |
| ## will be met: https://www.gnu.org/licenses/lgpl-3.0.html. |
| ## |
| ## GNU General Public License Usage |
| ## Alternatively, this file may be used under the terms of the GNU |
| ## General Public License version 2.0 or (at your option) the GNU General |
| ## Public license version 3 or any later version approved by the KDE Free |
| ## Qt Foundation. The licenses are as published by the Free Software |
| ## Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3 |
| ## included in the packaging of this file. Please review the following |
| ## information to ensure the GNU General Public License requirements will |
| ## be met: https://www.gnu.org/licenses/gpl-2.0.html and |
| ## https://www.gnu.org/licenses/gpl-3.0.html. |
| ## |
| ## $QT_END_LICENSE$ |
| ## |
| ############################################################################# |
| |
| # This is a small script to copy the required files from a PCRE2 tarball |
| # into 3rdparty/pcre2/ , following the instructions found in the NON-AUTOTOOLS-BUILD |
| # file. Documentation, tests, demos etc. are not imported. |
| |
| if [ $# -ne 2 ]; then |
| echo "Usage: $0 pcre2_tarball_dir/ \$QTDIR/src/3rdparty/pcre2/" |
| exit 1 |
| fi |
| |
| PCRE2_DIR=$1 |
| TARGET_DIR=$2 |
| |
| if [ ! -d "$PCRE2_DIR" -o ! -r "$PCRE2_DIR" -o ! -d "$TARGET_DIR" -o ! -w "$TARGET_DIR" ]; then |
| echo "Either the PCRE2 source dir or the target dir do not exist," |
| echo "are not directories or have the wrong permissions." |
| exit 2 |
| fi |
| |
| # with 1 argument, copies PCRE2_DIR/$1 to TARGET_DIR/$1 |
| # with 2 arguments, copies PCRE2_DIR/$1 to TARGET_DIR/$2 |
| copy_file() { |
| if [ $# -lt 1 -o $# -gt 2 ]; then |
| echo "Wrong number of arguments to copy_file" |
| exit 3 |
| fi |
| |
| SOURCE_FILE=$1 |
| if [ -n "$2" ]; then |
| DEST_FILE=$2 |
| else |
| DEST_FILE=$1 |
| fi |
| |
| mkdir -p "$TARGET_DIR/$(dirname "$SOURCE_FILE")" |
| cp "$PCRE2_DIR/$SOURCE_FILE" "$TARGET_DIR/$DEST_FILE" |
| } |
| |
| copy_file "src/pcre2.h.generic" "src/pcre2.h" |
| copy_file "src/pcre2_chartables.c.dist" "src/pcre2_chartables.c" |
| |
| FILES=" |
| AUTHORS |
| LICENCE |
| |
| src/pcre2_auto_possess.c |
| src/pcre2_compile.c |
| src/pcre2_config.c |
| src/pcre2_context.c |
| src/pcre2_dfa_match.c |
| src/pcre2_error.c |
| src/pcre2_extuni.c |
| src/pcre2_find_bracket.c |
| src/pcre2_internal.h |
| src/pcre2_intmodedep.h |
| src/pcre2_jit_compile.c |
| src/pcre2_jit_match.c |
| src/pcre2_jit_misc.c |
| src/pcre2_maketables.c |
| src/pcre2_match.c |
| src/pcre2_match_data.c |
| src/pcre2_newline.c |
| src/pcre2_ord2utf.c |
| src/pcre2_pattern_info.c |
| src/pcre2_script_run.c |
| src/pcre2_serialize.c |
| src/pcre2_jit_neon_inc.h |
| src/pcre2_jit_simd_inc.h |
| src/pcre2_string_utils.c |
| src/pcre2_study.c |
| src/pcre2_substitute.c |
| src/pcre2_substring.c |
| src/pcre2_tables.c |
| src/pcre2_ucd.c |
| src/pcre2_ucp.h |
| src/pcre2_valid_utf.c |
| src/pcre2_xclass.c |
| src/sljit/sljitConfig.h |
| src/sljit/sljitConfigInternal.h |
| src/sljit/sljitExecAllocator.c |
| src/sljit/sljitLir.c |
| src/sljit/sljitLir.h |
| src/sljit/sljitNativeARM_32.c |
| src/sljit/sljitNativeARM_64.c |
| src/sljit/sljitNativeARM_T2_32.c |
| src/sljit/sljitNativeMIPS_32.c |
| src/sljit/sljitNativeMIPS_64.c |
| src/sljit/sljitNativeMIPS_common.c |
| src/sljit/sljitNativePPC_32.c |
| src/sljit/sljitNativePPC_64.c |
| src/sljit/sljitNativePPC_common.c |
| src/sljit/sljitNativeSPARC_32.c |
| src/sljit/sljitNativeSPARC_common.c |
| src/sljit/sljitNativeTILEGX_64.c |
| src/sljit/sljitNativeTILEGX-encoder.c |
| src/sljit/sljitNativeX86_32.c |
| src/sljit/sljitNativeX86_64.c |
| src/sljit/sljitNativeX86_common.c |
| src/sljit/sljitUtils.c |
| " |
| |
| for i in $FILES; do |
| copy_file "$i" |
| done |