| /**************************************************************************** |
| ** |
| ** Copyright (C) 2016 Klaralvdalens Datakonsult AB (KDAB). |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the Qt3D module of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:LGPL$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** GNU Lesser General Public License Usage |
| ** Alternatively, this file may be used under the terms of the GNU Lesser |
| ** General Public License version 3 as published by the Free Software |
| ** Foundation and appearing in the file LICENSE.LGPL3 included in the |
| ** packaging of this file. Please review the following information to |
| ** ensure the GNU Lesser General Public License version 3 requirements |
| ** will be met: https://www.gnu.org/licenses/lgpl-3.0.html. |
| ** |
| ** GNU General Public License Usage |
| ** Alternatively, this file may be used under the terms of the GNU |
| ** General Public License version 2.0 or (at your option) the GNU General |
| ** Public license version 3 or any later version approved by the KDE Free |
| ** Qt Foundation. The licenses are as published by the Free Software |
| ** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3 |
| ** included in the packaging of this file. Please review the following |
| ** information to ensure the GNU General Public License requirements will |
| ** be met: https://www.gnu.org/licenses/gpl-2.0.html and |
| ** https://www.gnu.org/licenses/gpl-3.0.html. |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| #ifndef _USE_MATH_DEFINES |
| # define _USE_MATH_DEFINES // For MSVC |
| #endif |
| |
| #include "qconegeometry.h" |
| |
| #include <Qt3DExtras/qconemesh.h> |
| #include <Qt3DRender/qbuffer.h> |
| #include <Qt3DRender/qbufferdatagenerator.h> |
| #include <Qt3DRender/qattribute.h> |
| #include <QtGui/QVector3D> |
| |
| #include <qmath.h> |
| |
| QT_BEGIN_NAMESPACE |
| |
| namespace Qt3DExtras { |
| |
| /*! |
| * \qmltype ConeMesh |
| * \instantiates Qt3DExtras::QConeMesh |
| * \inqmlmodule Qt3D.Extras |
| * \brief A conical mesh. |
| */ |
| |
| /*! |
| * \qmlproperty int ConeMesh::rings |
| * |
| * Holds the number of rings in the mesh. |
| */ |
| |
| /*! |
| * \qmlproperty int ConeMesh::slices |
| * |
| * Holds the number of slices in the mesh. |
| */ |
| |
| /*! |
| * \qmlproperty bool ConeMesh::hasTopEndcap |
| * |
| * Determines if the cone top is capped or open. |
| */ |
| |
| /*! |
| * \qmlproperty bool ConeMesh::hasBottomEndcap |
| * |
| * Determines if the cone bottom is capped or open. |
| */ |
| |
| /*! |
| * \qmlproperty real ConeMesh::topRadius |
| * |
| * Holds the top radius of the cone. |
| */ |
| |
| /*! |
| * \qmlproperty real ConeMesh::bottomRadius |
| * |
| * Holds the bottom radius of the cone. |
| */ |
| |
| /*! |
| * \qmlproperty real ConeMesh::length |
| * |
| * Holds the length of the cone. |
| */ |
| |
| /*! |
| * \class Qt3DExtras::QConeMesh |
| \ingroup qt3d-extras-geometries |
| * \inheaderfile Qt3DExtras/QConeMesh |
| * \inmodule Qt3DExtras |
| * |
| * \inherits Qt3DRender::QGeometryRenderer |
| * |
| * \brief A conical mesh. |
| */ |
| |
| QConeMesh::QConeMesh(QNode *parent) |
| : QGeometryRenderer(parent) |
| { |
| QConeGeometry *geometry = new QConeGeometry(this); |
| QObject::connect(geometry, &QConeGeometry::hasTopEndcapChanged, this, &QConeMesh::hasTopEndcapChanged); |
| QObject::connect(geometry, &QConeGeometry::hasBottomEndcapChanged, this, &QConeMesh::hasBottomEndcapChanged); |
| QObject::connect(geometry, &QConeGeometry::topRadiusChanged, this, &QConeMesh::topRadiusChanged); |
| QObject::connect(geometry, &QConeGeometry::bottomRadiusChanged, this, &QConeMesh::bottomRadiusChanged); |
| QObject::connect(geometry, &QConeGeometry::ringsChanged, this, &QConeMesh::ringsChanged); |
| QObject::connect(geometry, &QConeGeometry::slicesChanged, this, &QConeMesh::slicesChanged); |
| QObject::connect(geometry, &QConeGeometry::lengthChanged, this, &QConeMesh::lengthChanged); |
| |
| QGeometryRenderer::setGeometry(geometry); |
| } |
| |
| /*! \internal */ |
| QConeMesh::~QConeMesh() |
| { |
| } |
| |
| void QConeMesh::setHasTopEndcap(bool hasTopEndcap) |
| { |
| static_cast<QConeGeometry *>(geometry())->setHasTopEndcap(hasTopEndcap); |
| } |
| |
| void QConeMesh::setHasBottomEndcap(bool hasBottomEndcap) |
| { |
| static_cast<QConeGeometry *>(geometry())->setHasBottomEndcap(hasBottomEndcap); |
| } |
| |
| void QConeMesh::setTopRadius(float topRadius) |
| { |
| static_cast<QConeGeometry *>(geometry())->setTopRadius(topRadius); |
| } |
| |
| void QConeMesh::setBottomRadius(float bottomRadius) |
| { |
| static_cast<QConeGeometry *>(geometry())->setBottomRadius(bottomRadius); |
| } |
| |
| void QConeMesh::setRings(int rings) |
| { |
| static_cast<QConeGeometry *>(geometry())->setRings(rings); |
| } |
| |
| void QConeMesh::setSlices(int slices) |
| { |
| static_cast<QConeGeometry *>(geometry())->setSlices(slices); |
| } |
| |
| void QConeMesh::setLength(float length) |
| { |
| static_cast<QConeGeometry *>(geometry())->setLength(length); |
| } |
| |
| /*! |
| * \property QConeMesh::hasTopEndcap |
| * |
| * Determines if the cone top is capped or open. |
| */ |
| bool QConeMesh::hasTopEndcap() const |
| { |
| return static_cast<QConeGeometry *>(geometry())->hasTopEndcap(); |
| } |
| |
| /*! |
| * \property QConeMesh::hasBottomEndcap |
| * |
| * Determines if the cone bottom is capped or open. |
| */ |
| bool QConeMesh::hasBottomEndcap() const |
| { |
| return static_cast<QConeGeometry *>(geometry())->hasBottomEndcap(); |
| } |
| |
| /*! |
| * \property QConeMesh::topRadius |
| * |
| * Holds the top radius of the cone. |
| */ |
| float QConeMesh::topRadius() const |
| { |
| return static_cast<QConeGeometry *>(geometry())->topRadius(); |
| } |
| |
| /*! |
| * \property QConeMesh::bottomRadius |
| * |
| * Holds the bottom radius of the cone. |
| */ |
| float QConeMesh::bottomRadius() const |
| { |
| return static_cast<QConeGeometry *>(geometry())->bottomRadius(); |
| } |
| |
| /*! |
| * \property QConeMesh::rings |
| * |
| * Holds the number of rings in the mesh. |
| */ |
| int QConeMesh::rings() const |
| { |
| return static_cast<QConeGeometry *>(geometry())->rings(); |
| } |
| |
| /*! |
| * \property QConeMesh::slices |
| * |
| * Holds the number of slices in the mesh. |
| */ |
| int QConeMesh::slices() const |
| { |
| return static_cast<QConeGeometry *>(geometry())->slices(); |
| } |
| |
| /*! |
| * \property QConeMesh::length |
| * |
| * Holds the length of the cone. |
| */ |
| float QConeMesh::length() const |
| { |
| return static_cast<QConeGeometry *>(geometry())->length(); |
| } |
| |
| } // namespace Qt3DExtras |
| |
| QT_END_NAMESPACE |