| /**************************************************************************** |
| ** |
| ** Copyright (C) 2015 Paul Lemire |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the Qt3D module of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:BSD$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** BSD License Usage |
| ** Alternatively, you may use this file under the terms of the BSD license |
| ** as follows: |
| ** |
| ** "Redistribution and use in source and binary forms, with or without |
| ** modification, are permitted provided that the following conditions are |
| ** met: |
| ** * Redistributions of source code must retain the above copyright |
| ** notice, this list of conditions and the following disclaimer. |
| ** * Redistributions in binary form must reproduce the above copyright |
| ** notice, this list of conditions and the following disclaimer in |
| ** the documentation and/or other materials provided with the |
| ** distribution. |
| ** * Neither the name of The Qt Company Ltd nor the names of its |
| ** contributors may be used to endorse or promote products derived |
| ** from this software without specific prior written permission. |
| ** |
| ** |
| ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| import QtQuick 2.4 as QQ2 |
| import Qt3D.Core 2.0 |
| import Qt3D.Render 2.0 |
| import Qt3D.Extras 2.0 |
| |
| Entity { |
| id: root |
| property Layer capsLayer |
| property Layer visualizationLayer |
| |
| property ShaderData sectionData: ShaderData { |
| property int sectionsCount: 3 |
| property ShaderDataArray sections: ShaderDataArray { |
| ShaderData { |
| property vector4d equation: clipPlane0.equation |
| property vector3d center: clipPlane0.center |
| } |
| ShaderData { |
| property vector4d equation: clipPlane1.equation |
| property vector3d center: clipPlane1.center |
| } |
| ShaderData { |
| property vector4d equation: clipPlane2.equation |
| property vector3d center: clipPlane2.center |
| } |
| } |
| } |
| |
| Entity { |
| property Material cappingMaterial: Material { |
| effect: CappingMaterialEffect { |
| sectionsData: root.sectionData |
| } |
| } |
| |
| property PlaneMesh mesh: PlaneMesh { |
| width: 20.0 |
| height: 20.0 |
| meshResolution: Qt.size(2, 2) |
| } |
| |
| components: [cappingMaterial, mesh, root.capsLayer] |
| } |
| |
| PlaneVisualizationMaterial { |
| id: clipPlanesMaterial |
| alpha: 0.5 |
| } |
| |
| // XZ |
| ClipPlaneEntity { |
| id: clipPlane0 |
| layer: root.visualizationLayer |
| visualMaterial: clipPlanesMaterial |
| center: Qt.vector3d(0, -10, 0) |
| normal: Qt.vector3d(0, -1.0, 0) |
| } |
| // XY |
| ClipPlaneEntity { |
| id: clipPlane1 |
| layer: root.visualizationLayer |
| visualMaterial: clipPlanesMaterial |
| center: Qt.vector3d(0, 0, 10) |
| normal: Qt.vector3d(0, 0, -1.0) |
| rotateAxis: Qt.vector3d(1.0, 0.0, 0.0) |
| rotateAngle: 90 |
| } |
| |
| // YZ |
| ClipPlaneEntity { |
| id: clipPlane2 |
| layer: root.visualizationLayer |
| visualMaterial: clipPlanesMaterial |
| center: Qt.vector3d(-10, 0, 0) |
| normal: Qt.vector3d(1.0, 0, 0) |
| rotateAxis: Qt.vector3d(0.0, 0.0, 1.0) |
| rotateAngle: -90 |
| } |
| |
| QQ2.SequentialAnimation { |
| running: true |
| loops: QQ2.Animation.Infinite |
| QQ2.NumberAnimation { |
| target: clipPlane0 |
| property: "center.y" |
| from: 10 |
| to: 0 |
| duration: 2000 |
| easing.type: QQ2.Easing.InOutQuart |
| } |
| |
| QQ2.NumberAnimation { |
| target: clipPlane1 |
| property: "center.z" |
| from: 10 |
| to: 0 |
| duration: 2000 |
| easing.type: QQ2.Easing.InOutQuart |
| } |
| QQ2.NumberAnimation { |
| target: clipPlane2 |
| property: "center.x" |
| from: -10 |
| to: 0 |
| duration: 4000 |
| easing.type: QQ2.Easing.InOutQuart |
| } |
| QQ2.NumberAnimation { |
| target: clipPlane1 |
| property: "center.z" |
| from: 0 |
| to: 10 |
| duration: 4000 |
| easing.type: QQ2.Easing.InOutQuint |
| } |
| QQ2.NumberAnimation { |
| target: clipPlane0 |
| property: "center.y" |
| from: 0 |
| to: 10 |
| duration: 2000 |
| easing.type: QQ2.Easing.InOutQuint |
| } |
| QQ2.NumberAnimation { |
| target: clipPlane2 |
| property: "center.x" |
| from: 0 |
| to: -10 |
| duration: 2000 |
| easing.type: QQ2.Easing.InOutQuint |
| } |
| } |
| } |