| /**************************************************************************** |
| ** |
| ** Copyright (C) 2016 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the examples of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:BSD$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** BSD License Usage |
| ** Alternatively, you may use this file under the terms of the BSD license |
| ** as follows: |
| ** |
| ** "Redistribution and use in source and binary forms, with or without |
| ** modification, are permitted provided that the following conditions are |
| ** met: |
| ** * Redistributions of source code must retain the above copyright |
| ** notice, this list of conditions and the following disclaimer. |
| ** * Redistributions in binary form must reproduce the above copyright |
| ** notice, this list of conditions and the following disclaimer in |
| ** the documentation and/or other materials provided with the |
| ** distribution. |
| ** * Neither the name of The Qt Company Ltd nor the names of its |
| ** contributors may be used to endorse or promote products derived |
| ** from this software without specific prior written permission. |
| ** |
| ** |
| ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| #include <QtWidgets> |
| |
| #include "mainwindow.h" |
| |
| MainWindow::MainWindow() |
| { |
| init(); |
| setCurrentFile(QString()); |
| } |
| |
| MainWindow::MainWindow(const QString &fileName) |
| { |
| init(); |
| loadFile(fileName); |
| } |
| |
| void MainWindow::closeEvent(QCloseEvent *event) |
| { |
| if (maybeSave()) { |
| writeSettings(); |
| event->accept(); |
| } else { |
| event->ignore(); |
| } |
| } |
| |
| void MainWindow::newFile() |
| { |
| MainWindow *other = new MainWindow; |
| other->tile(this); |
| other->show(); |
| } |
| |
| void MainWindow::open() |
| { |
| const QString fileName = QFileDialog::getOpenFileName(this); |
| if (!fileName.isEmpty()) |
| openFile(fileName); |
| } |
| |
| void MainWindow::openFile(const QString &fileName) |
| { |
| MainWindow *existing = findMainWindow(fileName); |
| if (existing) { |
| existing->show(); |
| existing->raise(); |
| existing->activateWindow(); |
| return; |
| } |
| |
| if (isUntitled && textEdit->document()->isEmpty() && !isWindowModified()) { |
| loadFile(fileName); |
| return; |
| } |
| |
| MainWindow *other = new MainWindow(fileName); |
| if (other->isUntitled) { |
| delete other; |
| return; |
| } |
| other->tile(this); |
| other->show(); |
| } |
| |
| bool MainWindow::save() |
| { |
| return isUntitled ? saveAs() : saveFile(curFile); |
| } |
| |
| bool MainWindow::saveAs() |
| { |
| QString fileName = QFileDialog::getSaveFileName(this, tr("Save As"), |
| curFile); |
| if (fileName.isEmpty()) |
| return false; |
| |
| return saveFile(fileName); |
| } |
| |
| void MainWindow::about() |
| { |
| QMessageBox::about(this, tr("About SDI"), |
| tr("The <b>SDI</b> example demonstrates how to write single " |
| "document interface applications using Qt.")); |
| } |
| |
| void MainWindow::documentWasModified() |
| { |
| setWindowModified(true); |
| } |
| |
| void MainWindow::init() |
| { |
| setAttribute(Qt::WA_DeleteOnClose); |
| |
| isUntitled = true; |
| |
| textEdit = new QTextEdit; |
| setCentralWidget(textEdit); |
| |
| createActions(); |
| createStatusBar(); |
| |
| readSettings(); |
| |
| connect(textEdit->document(), &QTextDocument::contentsChanged, |
| this, &MainWindow::documentWasModified); |
| |
| setUnifiedTitleAndToolBarOnMac(true); |
| } |
| |
| void MainWindow::tile(const QMainWindow *previous) |
| { |
| if (!previous) |
| return; |
| int topFrameWidth = previous->geometry().top() - previous->pos().y(); |
| if (!topFrameWidth) |
| topFrameWidth = 40; |
| const QPoint pos = previous->pos() + 2 * QPoint(topFrameWidth, topFrameWidth); |
| if (screen()->availableGeometry().contains(rect().bottomRight() + pos)) |
| move(pos); |
| } |
| |
| //! [implicit tr context] |
| void MainWindow::createActions() |
| { |
| QMenu *fileMenu = menuBar()->addMenu(tr("&File")); |
| //! [implicit tr context] |
| QToolBar *fileToolBar = addToolBar(tr("File")); |
| |
| const QIcon newIcon = QIcon::fromTheme("document-new", QIcon(":/images/new.png")); |
| QAction *newAct = new QAction(newIcon, tr("&New"), this); |
| newAct->setShortcuts(QKeySequence::New); |
| newAct->setStatusTip(tr("Create a new file")); |
| connect(newAct, &QAction::triggered, this, &MainWindow::newFile); |
| fileMenu->addAction(newAct); |
| fileToolBar->addAction(newAct); |
| |
| const QIcon openIcon = QIcon::fromTheme("document-open", QIcon(":/images/open.png")); |
| QAction *openAct = new QAction(openIcon, tr("&Open..."), this); |
| openAct->setShortcuts(QKeySequence::Open); |
| openAct->setStatusTip(tr("Open an existing file")); |
| connect(openAct, &QAction::triggered, this, &MainWindow::open); |
| fileMenu->addAction(openAct); |
| fileToolBar->addAction(openAct); |
| |
| const QIcon saveIcon = QIcon::fromTheme("document-save", QIcon(":/images/save.png")); |
| QAction *saveAct = new QAction(saveIcon, tr("&Save"), this); |
| saveAct->setShortcuts(QKeySequence::Save); |
| saveAct->setStatusTip(tr("Save the document to disk")); |
| connect(saveAct, &QAction::triggered, this, &MainWindow::save); |
| fileMenu->addAction(saveAct); |
| fileToolBar->addAction(saveAct); |
| |
| const QIcon saveAsIcon = QIcon::fromTheme("document-save-as"); |
| QAction *saveAsAct = fileMenu->addAction(saveAsIcon, tr("Save &As..."), this, &MainWindow::saveAs); |
| saveAsAct->setShortcuts(QKeySequence::SaveAs); |
| saveAsAct->setStatusTip(tr("Save the document under a new name")); |
| |
| fileMenu->addSeparator(); |
| |
| QMenu *recentMenu = fileMenu->addMenu(tr("Recent...")); |
| connect(recentMenu, &QMenu::aboutToShow, this, &MainWindow::updateRecentFileActions); |
| recentFileSubMenuAct = recentMenu->menuAction(); |
| |
| for (int i = 0; i < MaxRecentFiles; ++i) { |
| recentFileActs[i] = recentMenu->addAction(QString(), this, &MainWindow::openRecentFile); |
| recentFileActs[i]->setVisible(false); |
| } |
| |
| recentFileSeparator = fileMenu->addSeparator(); |
| |
| setRecentFilesVisible(MainWindow::hasRecentFiles()); |
| |
| QAction *closeAct = fileMenu->addAction(tr("&Close"), this, &QWidget::close); |
| closeAct->setShortcut(tr("Ctrl+W")); |
| closeAct->setStatusTip(tr("Close this window")); |
| |
| const QIcon exitIcon = QIcon::fromTheme("application-exit"); |
| QAction *exitAct = fileMenu->addAction(exitIcon, tr("E&xit"), qApp, &QApplication::closeAllWindows); |
| exitAct->setShortcuts(QKeySequence::Quit); |
| exitAct->setStatusTip(tr("Exit the application")); |
| |
| QMenu *editMenu = menuBar()->addMenu(tr("&Edit")); |
| QToolBar *editToolBar = addToolBar(tr("Edit")); |
| |
| #ifndef QT_NO_CLIPBOARD |
| const QIcon cutIcon = QIcon::fromTheme("edit-cut", QIcon(":/images/cut.png")); |
| QAction *cutAct = new QAction(cutIcon, tr("Cu&t"), this); |
| cutAct->setShortcuts(QKeySequence::Cut); |
| cutAct->setStatusTip(tr("Cut the current selection's contents to the " |
| "clipboard")); |
| connect(cutAct, &QAction::triggered, textEdit, &QTextEdit::cut); |
| editMenu->addAction(cutAct); |
| editToolBar->addAction(cutAct); |
| |
| const QIcon copyIcon = QIcon::fromTheme("edit-copy", QIcon(":/images/copy.png")); |
| QAction *copyAct = new QAction(copyIcon, tr("&Copy"), this); |
| copyAct->setShortcuts(QKeySequence::Copy); |
| copyAct->setStatusTip(tr("Copy the current selection's contents to the " |
| "clipboard")); |
| connect(copyAct, &QAction::triggered, textEdit, &QTextEdit::copy); |
| editMenu->addAction(copyAct); |
| editToolBar->addAction(copyAct); |
| |
| const QIcon pasteIcon = QIcon::fromTheme("edit-paste", QIcon(":/images/paste.png")); |
| QAction *pasteAct = new QAction(pasteIcon, tr("&Paste"), this); |
| pasteAct->setShortcuts(QKeySequence::Paste); |
| pasteAct->setStatusTip(tr("Paste the clipboard's contents into the current " |
| "selection")); |
| connect(pasteAct, &QAction::triggered, textEdit, &QTextEdit::paste); |
| editMenu->addAction(pasteAct); |
| editToolBar->addAction(pasteAct); |
| |
| menuBar()->addSeparator(); |
| #endif // !QT_NO_CLIPBOARD |
| |
| QMenu *helpMenu = menuBar()->addMenu(tr("&Help")); |
| QAction *aboutAct = helpMenu->addAction(tr("&About"), this, &MainWindow::about); |
| aboutAct->setStatusTip(tr("Show the application's About box")); |
| |
| QAction *aboutQtAct = helpMenu->addAction(tr("About &Qt"), qApp, &QApplication::aboutQt); |
| aboutQtAct->setStatusTip(tr("Show the Qt library's About box")); |
| |
| #ifndef QT_NO_CLIPBOARD |
| cutAct->setEnabled(false); |
| copyAct->setEnabled(false); |
| connect(textEdit, &QTextEdit::copyAvailable, cutAct, &QAction::setEnabled); |
| connect(textEdit, &QTextEdit::copyAvailable, copyAct, &QAction::setEnabled); |
| #endif // !QT_NO_CLIPBOARD |
| } |
| |
| void MainWindow::createStatusBar() |
| { |
| statusBar()->showMessage(tr("Ready")); |
| } |
| |
| void MainWindow::readSettings() |
| { |
| QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); |
| const QByteArray geometry = settings.value("geometry", QByteArray()).toByteArray(); |
| if (geometry.isEmpty()) { |
| const QRect availableGeometry = screen()->availableGeometry(); |
| resize(availableGeometry.width() / 3, availableGeometry.height() / 2); |
| move((availableGeometry.width() - width()) / 2, |
| (availableGeometry.height() - height()) / 2); |
| } else { |
| restoreGeometry(geometry); |
| } |
| } |
| |
| void MainWindow::writeSettings() |
| { |
| QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); |
| settings.setValue("geometry", saveGeometry()); |
| } |
| |
| bool MainWindow::maybeSave() |
| { |
| if (!textEdit->document()->isModified()) |
| return true; |
| const QMessageBox::StandardButton ret |
| = QMessageBox::warning(this, tr("SDI"), |
| tr("The document has been modified.\n" |
| "Do you want to save your changes?"), |
| QMessageBox::Save | QMessageBox::Discard |
| | QMessageBox::Cancel); |
| switch (ret) { |
| case QMessageBox::Save: |
| return save(); |
| case QMessageBox::Cancel: |
| return false; |
| default: |
| break; |
| } |
| return true; |
| } |
| |
| void MainWindow::loadFile(const QString &fileName) |
| { |
| |
| QFile file(fileName); |
| if (!file.open(QFile::ReadOnly | QFile::Text)) { |
| QMessageBox::warning(this, tr("SDI"), |
| tr("Cannot read file %1:\n%2.") |
| .arg(QDir::toNativeSeparators(fileName), file.errorString())); |
| return; |
| } |
| |
| QTextStream in(&file); |
| QGuiApplication::setOverrideCursor(Qt::WaitCursor); |
| textEdit->setPlainText(in.readAll()); |
| QGuiApplication::restoreOverrideCursor(); |
| |
| setCurrentFile(fileName); |
| statusBar()->showMessage(tr("File loaded"), 2000); |
| } |
| |
| void MainWindow::setRecentFilesVisible(bool visible) |
| { |
| recentFileSubMenuAct->setVisible(visible); |
| recentFileSeparator->setVisible(visible); |
| } |
| |
| static inline QString recentFilesKey() { return QStringLiteral("recentFileList"); } |
| static inline QString fileKey() { return QStringLiteral("file"); } |
| |
| static QStringList readRecentFiles(QSettings &settings) |
| { |
| QStringList result; |
| const int count = settings.beginReadArray(recentFilesKey()); |
| for (int i = 0; i < count; ++i) { |
| settings.setArrayIndex(i); |
| result.append(settings.value(fileKey()).toString()); |
| } |
| settings.endArray(); |
| return result; |
| } |
| |
| static void writeRecentFiles(const QStringList &files, QSettings &settings) |
| { |
| const int count = files.size(); |
| settings.beginWriteArray(recentFilesKey()); |
| for (int i = 0; i < count; ++i) { |
| settings.setArrayIndex(i); |
| settings.setValue(fileKey(), files.at(i)); |
| } |
| settings.endArray(); |
| } |
| |
| bool MainWindow::hasRecentFiles() |
| { |
| QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); |
| const int count = settings.beginReadArray(recentFilesKey()); |
| settings.endArray(); |
| return count > 0; |
| } |
| |
| void MainWindow::prependToRecentFiles(const QString &fileName) |
| { |
| QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); |
| |
| const QStringList oldRecentFiles = readRecentFiles(settings); |
| QStringList recentFiles = oldRecentFiles; |
| recentFiles.removeAll(fileName); |
| recentFiles.prepend(fileName); |
| if (oldRecentFiles != recentFiles) |
| writeRecentFiles(recentFiles, settings); |
| |
| setRecentFilesVisible(!recentFiles.isEmpty()); |
| } |
| |
| void MainWindow::updateRecentFileActions() |
| { |
| QSettings settings(QCoreApplication::organizationName(), QCoreApplication::applicationName()); |
| |
| const QStringList recentFiles = readRecentFiles(settings); |
| const int count = qMin(int(MaxRecentFiles), recentFiles.size()); |
| int i = 0; |
| for ( ; i < count; ++i) { |
| const QString fileName = MainWindow::strippedName(recentFiles.at(i)); |
| recentFileActs[i]->setText(tr("&%1 %2").arg(i + 1).arg(fileName)); |
| recentFileActs[i]->setData(recentFiles.at(i)); |
| recentFileActs[i]->setVisible(true); |
| } |
| for ( ; i < MaxRecentFiles; ++i) |
| recentFileActs[i]->setVisible(false); |
| } |
| |
| void MainWindow::openRecentFile() |
| { |
| if (const QAction *action = qobject_cast<const QAction *>(sender())) |
| openFile(action->data().toString()); |
| } |
| |
| bool MainWindow::saveFile(const QString &fileName) |
| { |
| QString errorMessage; |
| |
| QGuiApplication::setOverrideCursor(Qt::WaitCursor); |
| QSaveFile file(fileName); |
| if (file.open(QFile::WriteOnly | QFile::Text)) { |
| QTextStream out(&file); |
| out << textEdit->toPlainText(); |
| if (!file.commit()) { |
| errorMessage = tr("Cannot write file %1:\n%2.") |
| .arg(QDir::toNativeSeparators(fileName), file.errorString()); |
| } |
| } else { |
| errorMessage = tr("Cannot open file %1 for writing:\n%2.") |
| .arg(QDir::toNativeSeparators(fileName), file.errorString()); |
| } |
| QGuiApplication::restoreOverrideCursor(); |
| |
| if (!errorMessage.isEmpty()) { |
| QMessageBox::warning(this, tr("SDI"), errorMessage); |
| return false; |
| } |
| |
| setCurrentFile(fileName); |
| statusBar()->showMessage(tr("File saved"), 2000); |
| return true; |
| } |
| |
| void MainWindow::setCurrentFile(const QString &fileName) |
| { |
| static int sequenceNumber = 1; |
| |
| isUntitled = fileName.isEmpty(); |
| if (isUntitled) { |
| curFile = tr("document%1.txt").arg(sequenceNumber++); |
| } else { |
| curFile = QFileInfo(fileName).canonicalFilePath(); |
| } |
| |
| textEdit->document()->setModified(false); |
| setWindowModified(false); |
| |
| if (!isUntitled && windowFilePath() != curFile) |
| MainWindow::prependToRecentFiles(curFile); |
| |
| setWindowFilePath(curFile); |
| } |
| |
| QString MainWindow::strippedName(const QString &fullFileName) |
| { |
| return QFileInfo(fullFileName).fileName(); |
| } |
| |
| MainWindow *MainWindow::findMainWindow(const QString &fileName) const |
| { |
| QString canonicalFilePath = QFileInfo(fileName).canonicalFilePath(); |
| |
| const QList<QWidget *> topLevelWidgets = QApplication::topLevelWidgets(); |
| for (QWidget *widget : topLevelWidgets) { |
| MainWindow *mainWin = qobject_cast<MainWindow *>(widget); |
| if (mainWin && mainWin->curFile == canonicalFilePath) |
| return mainWin; |
| } |
| |
| return nullptr; |
| } |