| /**************************************************************************** |
| ** |
| ** Copyright (C) 2017 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the test suite of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:BSD$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** BSD License Usage |
| ** Alternatively, you may use this file under the terms of the BSD license |
| ** as follows: |
| ** |
| ** "Redistribution and use in source and binary forms, with or without |
| ** modification, are permitted provided that the following conditions are |
| ** met: |
| ** * Redistributions of source code must retain the above copyright |
| ** notice, this list of conditions and the following disclaimer. |
| ** * Redistributions in binary form must reproduce the above copyright |
| ** notice, this list of conditions and the following disclaimer in |
| ** the documentation and/or other materials provided with the |
| ** distribution. |
| ** * Neither the name of The Qt Company Ltd nor the names of its |
| ** contributors may be used to endorse or promote products derived |
| ** from this software without specific prior written permission. |
| ** |
| ** |
| ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| import QtQuick 2.12 |
| import QtTest 1.0 |
| import QtQuick.Controls 2.12 |
| import QtQuick.Templates 2.12 as T |
| |
| TestCase { |
| id: testCase |
| width: 400 |
| height: 400 |
| visible: true |
| when: windowShown |
| name: "Container" |
| |
| Component { |
| id: container |
| Container { } |
| } |
| |
| Component { |
| id: rectangle |
| Rectangle { } |
| } |
| |
| function test_implicitSize() { |
| var control = createTemporaryObject(container, testCase) |
| verify(control) |
| |
| compare(control.implicitWidth, 0) |
| compare(control.implicitHeight, 0) |
| |
| control.contentItem = rectangle.createObject(control, {implicitWidth: 10, implicitHeight: 20}) |
| compare(control.implicitWidth, 10) |
| compare(control.implicitHeight, 20) |
| |
| control.background = rectangle.createObject(control, {implicitWidth: 20, implicitHeight: 30}) |
| compare(control.implicitWidth, 20) |
| compare(control.implicitHeight, 30) |
| |
| control.padding = 100 |
| compare(control.implicitWidth, 210) |
| compare(control.implicitHeight, 220) |
| } |
| |
| function test_currentIndex() { |
| var control1 = createTemporaryObject(container, testCase) |
| verify(control1) |
| |
| var control2 = createTemporaryObject(container, testCase) |
| verify(control2) |
| |
| compare(control1.currentIndex, -1) |
| compare(control2.currentIndex, -1) |
| |
| for (var i = 0; i < 3; ++i) { |
| control1.addItem(rectangle.createObject(control1)) |
| control2.addItem(rectangle.createObject(control2)) |
| } |
| |
| compare(control1.count, 3) |
| compare(control2.count, 3) |
| compare(control1.currentIndex, 0) |
| compare(control2.currentIndex, 0) |
| |
| control1.currentIndex = Qt.binding(function() { return control2.currentIndex }) |
| control2.currentIndex = Qt.binding(function() { return control1.currentIndex }) |
| |
| control1.setCurrentIndex(1) |
| compare(control1.currentIndex, 1) |
| compare(control2.currentIndex, 1) |
| |
| control1.incrementCurrentIndex() |
| compare(control1.currentIndex, 2) |
| compare(control2.currentIndex, 2) |
| |
| control2.decrementCurrentIndex() |
| compare(control1.currentIndex, 1) |
| compare(control2.currentIndex, 1) |
| } |
| |
| Component { |
| id: repeaterContainer1 |
| Container { |
| id: container |
| Item { objectName: "0" } |
| Item { objectName: "1" } |
| Item { objectName: "2" } |
| Item { objectName: "3" } |
| contentItem: Row { |
| Repeater { |
| model: container.contentModel |
| } |
| } |
| } |
| } |
| |
| Component { |
| id: repeaterContainer2 |
| Container { |
| id: container |
| contentItem: Item { |
| Repeater { |
| model: container.contentModel |
| } |
| Rectangle { objectName: "extra" } |
| } |
| Rectangle { objectName: "0" } |
| Rectangle { objectName: "1" } |
| Rectangle { objectName: "2" } |
| Rectangle { objectName: "3" } |
| } |
| } |
| |
| function test_repeater_data() { |
| return [ |
| { tag: "1", component: repeaterContainer1 }, |
| { tag: "2", component: repeaterContainer2 } |
| ] |
| } |
| |
| // don't crash (QTBUG-61310) |
| function test_repeater(data) { |
| var control = createTemporaryObject(data.component) |
| verify(control) |
| |
| compare(control.itemAt(0).objectName, "0") |
| compare(control.itemAt(1).objectName, "1") |
| compare(control.itemAt(2).objectName, "2") |
| compare(control.itemAt(3).objectName, "3") |
| } |
| |
| function test_removeTakeItem() { |
| var control = createTemporaryObject(container, testCase) |
| verify(control) |
| |
| var item1 = rectangle.createObject(control) |
| var item2 = rectangle.createObject(control) |
| var item3 = rectangle.createObject(control) |
| |
| item1.Component.onDestruction.connect(function() { item1 = null }) |
| item2.Component.onDestruction.connect(function() { item2 = null }) |
| item3.Component.onDestruction.connect(function() { item3 = null }) |
| |
| control.addItem(item1) |
| control.addItem(item2) |
| control.addItem(item3) |
| compare(control.count, 3) |
| |
| // takeItem(int) does not destroy |
| compare(control.takeItem(1), item2) |
| compare(control.count, 2) |
| wait(1) |
| verify(item2) |
| |
| // removeItem(Item) destroys |
| control.removeItem(item1) |
| compare(control.count, 1) |
| wait(1) |
| verify(!item1) |
| |
| // removeItem(null) must not call removeItem(0) |
| control.removeItem(null) |
| compare(control.count, 1) |
| wait(1) |
| verify(item3) |
| |
| // deprecated removeItem(int) does not destroy |
| control.removeItem(0) |
| compare(control.count, 0) |
| wait(1) |
| verify(item3) |
| } |
| } |