qt-everywhere-src-5.15.1/qtquickcontrols2/tests/auto/controls/data/tst_dialogbuttonbox.qml - orbit - Git at Google

 /****************************************************************************
 **
 ** Copyright (C) 2017 The Qt Company Ltd.
 ** Contact: https://www.qt.io/licensing/
 **
 ** This file is part of the test suite of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:BSD$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
 ** a written agreement between you and The Qt Company. For licensing terms
 ** and conditions see https://www.qt.io/terms-conditions. For further
 ** information use the contact form at https://www.qt.io/contact-us.
 **
 ** BSD License Usage
 ** Alternatively, you may use this file under the terms of the BSD license
 ** as follows:
 **
 ** "Redistribution and use in source and binary forms, with or without
 ** modification, are permitted provided that the following conditions are
 ** met:
 **   * Redistributions of source code must retain the above copyright
 **     notice, this list of conditions and the following disclaimer.
 **   * Redistributions in binary form must reproduce the above copyright
 **     notice, this list of conditions and the following disclaimer in
 **     the documentation and/or other materials provided with the
 **     distribution.
 **   * Neither the name of The Qt Company Ltd nor the names of its
 **     contributors may be used to endorse or promote products derived
 **     from this software without specific prior written permission.
 **
 **
 ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
 **
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/

 import QtQuick 2.12
 import QtTest 1.0
 import QtQuick.Controls 2.12

 TestCase {
     id: testCase
     width: 600
     height: 400
     visible: true
     when: windowShown
     name: "DialogButtonBox"

     Component {
         id: buttonBox
         DialogButtonBox { }
     }

     Component {
         id: button
         Button { }
     }

     Component {
         id: signalSpy
         SignalSpy { }
     }

     function test_defaults() {
         var control = createTemporaryObject(buttonBox, testCase)
         verify(control)
         compare(control.count, 0)
         verify(control.delegate)
         compare(control.standardButtons, 0)
     }

     function test_standardButtons() {
         var control = createTemporaryObject(buttonBox, testCase)
         verify(control)
         compare(control.count, 0)

         control.standardButtons = DialogButtonBox.Ok
         compare(control.count, 1)
         var okButton = control.itemAt(0)
         verify(okButton)
         compare(okButton.text.toUpperCase(), "OK")

         control.standardButtons = DialogButtonBox.Cancel
         compare(control.count, 1)
         var cancelButton = control.itemAt(0)
         verify(cancelButton)
         compare(cancelButton.text.toUpperCase(), "CANCEL")

         control.standardButtons = DialogButtonBox.Ok | DialogButtonBox.Cancel
         compare(control.count, 2)
         if (control.itemAt(0).text.toUpperCase() === "OK") {
             okButton = control.itemAt(0)
             cancelButton = control.itemAt(1)
         } else {
             okButton = control.itemAt(1)
             cancelButton = control.itemAt(0)
         }
         verify(okButton)
         verify(cancelButton)
         compare(okButton.text.toUpperCase(), "OK")
         compare(cancelButton.text.toUpperCase(), "CANCEL")
         compare(control.standardButton(DialogButtonBox.Ok), okButton)
         compare(control.standardButton(DialogButtonBox.Cancel), cancelButton)

         control.standardButtons = 0
         compare(control.count, 0)

         compare(control.standardButton(DialogButtonBox.Ok), null)
         compare(control.standardButton(DialogButtonBox.Cancel), null)
     }

     function test_attached() {
         var control = createTemporaryObject(buttonBox, testCase)
         verify(control)

         control.standardButtons = DialogButtonBox.Ok
         var okButton = control.itemAt(0)
         compare(okButton.DialogButtonBox.buttonBox, control)
         compare(okButton.DialogButtonBox.buttonRole, DialogButtonBox.AcceptRole)

         var saveButton = button.createObject(control, {text: "Save"})
         compare(saveButton.DialogButtonBox.buttonBox, control)
         compare(saveButton.DialogButtonBox.buttonRole, DialogButtonBox.InvalidRole)
         saveButton.DialogButtonBox.buttonRole = DialogButtonBox.AcceptRole
         compare(saveButton.DialogButtonBox.buttonRole, DialogButtonBox.AcceptRole)

         var closeButton = createTemporaryObject(button, null, {text: "Save"})
         compare(closeButton.DialogButtonBox.buttonBox, null)
         compare(closeButton.DialogButtonBox.buttonRole, DialogButtonBox.InvalidRole)
         closeButton.DialogButtonBox.buttonRole = DialogButtonBox.DestructiveRole
         compare(closeButton.DialogButtonBox.buttonRole, DialogButtonBox.DestructiveRole)
         control.addItem(closeButton)
         compare(closeButton.DialogButtonBox.buttonBox, control)

         control.contentModel.clear()
         compare(okButton.DialogButtonBox.buttonBox, null)
         compare(saveButton.DialogButtonBox.buttonBox, null)
         compare(closeButton.DialogButtonBox.buttonBox, null)
     }

     function test_signals_data() {
         return [
             { tag: "Ok", standardButton: DialogButtonBox.Ok, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
             { tag: "Open", standardButton: DialogButtonBox.Open, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
             { tag: "Save", standardButton: DialogButtonBox.Save, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
             { tag: "Cancel", standardButton: DialogButtonBox.Cancel, buttonRole: DialogButtonBox.RejectRole, signalName: "rejected" },
             { tag: "Close", standardButton: DialogButtonBox.Close, buttonRole: DialogButtonBox.RejectRole, signalName: "rejected" },
             { tag: "Discard", standardButton: DialogButtonBox.Discard, buttonRole: DialogButtonBox.DestructiveRole, signalName: "discarded" },
             { tag: "Apply", standardButton: DialogButtonBox.Apply, buttonRole: DialogButtonBox.ApplyRole, signalName: "applied" },
             { tag: "Reset", standardButton: DialogButtonBox.Reset, buttonRole: DialogButtonBox.ResetRole, signalName: "reset" },
             { tag: "RestoreDefaults", standardButton: DialogButtonBox.RestoreDefaults, buttonRole: DialogButtonBox.ResetRole, signalName: "reset" },
             { tag: "Help", standardButton: DialogButtonBox.Help, buttonRole: DialogButtonBox.HelpRole, signalName: "helpRequested" },
             { tag: "SaveAll", standardButton: DialogButtonBox.SaveAll, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
             { tag: "Yes", standardButton: DialogButtonBox.Yes, buttonRole: DialogButtonBox.YesRole, signalName: "accepted" },
             { tag: "YesToAll", standardButton: DialogButtonBox.YesToAll, buttonRole: DialogButtonBox.YesRole, signalName: "accepted" },
             { tag: "No", standardButton: DialogButtonBox.No, buttonRole: DialogButtonBox.NoRole, signalName: "rejected" },
             { tag: "NoToAll", standardButton: DialogButtonBox.NoToAll, buttonRole: DialogButtonBox.NoRole, signalName: "rejected" },
             { tag: "Abort", standardButton: DialogButtonBox.Abort, buttonRole: DialogButtonBox.RejectRole, signalName: "rejected" },
             { tag: "Retry", standardButton: DialogButtonBox.Retry, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
             { tag: "Ignore", standardButton: DialogButtonBox.Ignore, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" }
         ]
     }

     function test_signals(data) {
         var control = createTemporaryObject(buttonBox, testCase)
         verify(control)

         control.standardButtons = data.standardButton
         compare(control.count, 1)
         var button = control.itemAt(0)
         verify(button)
         compare(button.DialogButtonBox.buttonRole, data.buttonRole)

         var clickedSpy = signalSpy.createObject(control, {target: control, signalName: "clicked"})
         verify(clickedSpy.valid)
         var roleSpy = signalSpy.createObject(control, {target: control, signalName: data.signalName})
         verify(roleSpy.valid)

         button.clicked()
         compare(clickedSpy.count, 1)
         compare(clickedSpy.signalArguments[0][0], button)
         compare(roleSpy.count, 1)
     }

     function test_buttonLayout_data() {
         return [
             { tag: "WinLayout", buttonLayout: DialogButtonBox.WinLayout, button1Role: DialogButtonBox.AcceptRole, button2Role: DialogButtonBox.RejectRole },
             { tag: "MacLayout", buttonLayout: DialogButtonBox.MacLayout, button1Role: DialogButtonBox.RejectRole, button2Role: DialogButtonBox.AcceptRole },
             { tag: "KdeLayout", buttonLayout: DialogButtonBox.KdeLayout, button1Role: DialogButtonBox.AcceptRole, button2Role: DialogButtonBox.RejectRole },
             { tag: "GnomeLayout", buttonLayout: DialogButtonBox.GnomeLayout, button1Role: DialogButtonBox.RejectRole, button2Role: DialogButtonBox.AcceptRole },
             { tag: "AndroidLayout", buttonLayout: DialogButtonBox.AndroidLayout, button1Role: DialogButtonBox.RejectRole, button2Role: DialogButtonBox.AcceptRole }
         ]
     }

     function test_buttonLayout(data) {
         var control = createTemporaryObject(buttonBox, testCase, {buttonLayout: data.buttonLayout, standardButtons: DialogButtonBox.Ok|DialogButtonBox.Cancel})
         verify(control)

         compare(control.count, 2)

         var button1 = control.itemAt(0)
         verify(button1)
         compare(button1.DialogButtonBox.buttonRole, data.button1Role)

         var button2 = control.itemAt(1)
         verify(button2)
         compare(button2.DialogButtonBox.buttonRole, data.button2Role)
     }

     function test_implicitSize_data() {
         return [
             { tag: "Ok", standardButtons: DialogButtonBox.Ok },
             { tag: "Yes|No", standardButtons: DialogButtonBox.Yes | DialogButtonBox.No }
         ]
     }

     // QTBUG-59719
     function test_implicitSize(data) {
         var control = createTemporaryObject(buttonBox, testCase, {standardButtons: data.standardButtons})
         verify(control)

         var listView = control.contentItem
         verify(listView && listView.hasOwnProperty("contentWidth"))
         waitForRendering(listView)

         var implicitContentWidth = control.leftPadding + control.rightPadding
         for (var i = 0; i < listView.contentItem.children.length; ++i) {
             var button = listView.contentItem.children[i]
             if (!button.hasOwnProperty("text"))
                 continue
             implicitContentWidth += button.implicitWidth
         }

         verify(implicitContentWidth > control.leftPadding + control.rightPadding)
         verify(control.implicitWidth >= implicitContentWidth, qsTr("implicit width (%1) is less than content width (%2)").arg(control.implicitWidth).arg(implicitContentWidth))
     }

     Component {
         id: okCancelBox
         DialogButtonBox {
             Button {
                 text: qsTr("OK")
             }
             Button {
                 text: qsTr("Cancel")
             }
         }
     }

     function test_buttonSize() {
         var control = createTemporaryObject(okCancelBox, testCase)
         verify(control)

         var okButton = control.itemAt(0)
         verify(okButton)
         verify(okButton.width > 0)

         var cancelButton = control.itemAt(1)
         verify(cancelButton)
         verify(cancelButton.width > 0)

         compare(okButton.width + cancelButton.width, control.availableWidth - control.spacing)
     }

     function test_oneButtonInFixedWidthBox() {
         var control = createTemporaryObject(buttonBox, testCase,
             { width: 400, standardButtons: Dialog.Close })
         verify(control)

         var listView = control.contentItem
         waitForRendering(listView)

         var button = control.itemAt(0)
         verify(button)

         // The button should never go outside of the box.
         tryVerify(function() { return button.mapToItem(control, 0, 0).x >= 0 },
             1000, "Expected left edge of button to be within left edge of DialogButtonBox (i.e. greater than or equal to 0)" +
                 ", but it's " + button.mapToItem(control, 0, 0).x)
         tryVerify(function() { return button.mapToItem(control, 0, 0).x + button.width <= control.width },
             1000, "Expected right edge of button to be within right edge of DialogButtonBox (i.e. less than or equal to " +
                 control.width + "), but it's " + (button.mapToItem(control, 0, 0).x + button.width))
     }

     Component {
         id: dialogComponent
         // Based on the Default style, where a single button fills
         // half the dialog's width and is aligned to the right.
         Dialog {
             id: control
             standardButtons: Dialog.Ok
             visible: true

             footer: DialogButtonBox {
                 id: box
                 visible: count > 0
                 alignment: count === 1 ? Qt.AlignRight : undefined

                 implicitWidth: Math.max(implicitBackgroundWidth + leftInset + rightInset,
                     (count === 1 ? implicitContentWidth * 2 : implicitContentWidth) + leftPadding + rightPadding)
                 implicitHeight: Math.max(implicitBackgroundHeight + topInset + bottomInset,
                     implicitContentHeight + topPadding + bottomPadding)
                 contentWidth: contentItem.contentWidth

                 delegate: Button {
                     width: box.count === 1 ? box.availableWidth / 2 : undefined
                 }
             }
         }
     }

     // QTBUG-73860
     function test_oneButtonAlignedRightInImplicitWidthBox() {
         var dialog = createTemporaryObject(dialogComponent, testCase)
         verify(dialog)

         var box = dialog.footer
         var listView = box.contentItem
         waitForRendering(listView)

         var button = box.itemAt(0)
         verify(button)

         // The button should never go outside of the box.
         tryVerify(function() { return button.mapToItem(box, 0, 0).x >= 0 },
             1000, "Expected left edge of button to be within left edge of DialogButtonBox (i.e. greater than or equal to 0)" +
                 ", but it's " + button.mapToItem(box, 0, 0).x)
         tryVerify(function() { return button.mapToItem(box, 0, 0).x + button.width <= box.width },
             1000, "Expected right edge of button to be within right edge of DialogButtonBox (i.e. less than or equal to " +
                 box.width + "), but it's " + (button.mapToItem(box, 0, 0).x + button.width))
         compare(box.width, dialog.width)
         // There's a single button and we align it to the right.
         compare(box.contentItem.width, button.width)
         compare(box.contentItem.x, box.width - box.rightPadding - box.contentItem.width)
     }

     Component {
         id: customButtonBox

         DialogButtonBox {
             objectName: "customButtonBox"
             alignment: Qt.AlignRight

             property alias okButton: okButton

             Button {
                 id: okButton
                 text: "OK"

                 DialogButtonBox.buttonRole: DialogButtonBox.AcceptRole
             }
         }
     }

     Component {
         id: customButtonBoxTwoButtons

         DialogButtonBox {
             objectName: "customButtonBoxTwoButtons"
             alignment: Qt.AlignRight

             property alias okButton: okButton

             Button {
                 id: okButton
                 text: "OK"

                 DialogButtonBox.buttonRole: DialogButtonBox.AcceptRole
             }
             Button {
                 text: "Cancel"

                 DialogButtonBox.buttonRole: DialogButtonBox.RejectRole
             }
         }
     }

     function test_changeCustomButtonText_data() {
         return [
             { tag: "oneButton", component: customButtonBox },
             { tag: "twoButtons", component: customButtonBoxTwoButtons },
         ]
     }

     // QTBUG-72886
     function test_changeCustomButtonText(data) {
         var control = createTemporaryObject(customButtonBox, testCase, {})
         verify(control)

         var listView = control.contentItem
         waitForRendering(listView)

         var button = control.okButton
         verify(button)
         button.text = "some longer text";

         // The button should never go outside of the box.
         tryVerify(function() { return button.mapToItem(control, 0, 0).x >= 0 },
             1000, "Expected left edge of button to be within left edge of DialogButtonBox (i.e. greater than or equal to 0)" +
                 ", but it's " + button.mapToItem(control, 0, 0).x)
         tryVerify(function() { return button.mapToItem(control, 0, 0).x + button.width <= control.width },
             1000, "Expected right edge of button to be within right edge of DialogButtonBox (i.e. less than or equal to " +
                 control.width + "), but it's " + (button.mapToItem(control, 0, 0).x + button.width))
     }

     Component {
         id: noRolesDialog

         Dialog {
             footer: DialogButtonBox {
                 Button { text: "A" }
                 Button { text: "B" }
                 Button { text: "C" }
             }
         }
     }

     function test_orderWithNoRoles() {
         for (var i = 0; i < 10; ++i) {
             var control = createTemporaryObject(noRolesDialog, testCase)
             verify(control)

             control.open()
             tryCompare(control, "opened", true)
             var footer = control.footer
             verify(footer)
             waitForRendering(footer)
             compare(footer.itemAt(0).text, "A")
             compare(footer.itemAt(1).text, "B")
             compare(footer.itemAt(2).text, "C")
         }
     }
 }
	/****************************************************************************
	**
	** Copyright (C) 2017 The Qt Company Ltd.
	** Contact: https://www.qt.io/licensing/
	**
	** This file is part of the test suite of the Qt Toolkit.
	**
	** $QT_BEGIN_LICENSE:BSD$
	** Commercial License Usage
	** Licensees holding valid commercial Qt licenses may use this file in
	** accordance with the commercial license agreement provided with the
	** Software or, alternatively, in accordance with the terms contained in
	** a written agreement between you and The Qt Company. For licensing terms
	** and conditions see https://www.qt.io/terms-conditions. For further
	** information use the contact form at https://www.qt.io/contact-us.
	**
	** BSD License Usage
	** Alternatively, you may use this file under the terms of the BSD license
	** as follows:
	**
	** "Redistribution and use in source and binary forms, with or without
	** modification, are permitted provided that the following conditions are
	** met:
	** * Redistributions of source code must retain the above copyright
	** notice, this list of conditions and the following disclaimer.
	** * Redistributions in binary form must reproduce the above copyright
	** notice, this list of conditions and the following disclaimer in
	** the documentation and/or other materials provided with the
	** distribution.
	** * Neither the name of The Qt Company Ltd nor the names of its
	** contributors may be used to endorse or promote products derived
	** from this software without specific prior written permission.
	**
	**
	** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
	**
	** $QT_END_LICENSE$
	**
	****************************************************************************/

	import QtQuick 2.12
	import QtTest 1.0
	import QtQuick.Controls 2.12

	TestCase {
	id: testCase
	width: 600
	height: 400
	visible: true
	when: windowShown
	name: "DialogButtonBox"

	Component {
	id: buttonBox
	DialogButtonBox { }
	}

	Component {
	id: button
	Button { }
	}

	Component {
	id: signalSpy
	SignalSpy { }
	}

	function test_defaults() {
	var control = createTemporaryObject(buttonBox, testCase)
	verify(control)
	compare(control.count, 0)
	verify(control.delegate)
	compare(control.standardButtons, 0)
	}

	function test_standardButtons() {
	var control = createTemporaryObject(buttonBox, testCase)
	verify(control)
	compare(control.count, 0)

	control.standardButtons = DialogButtonBox.Ok
	compare(control.count, 1)
	var okButton = control.itemAt(0)
	verify(okButton)
	compare(okButton.text.toUpperCase(), "OK")

	control.standardButtons = DialogButtonBox.Cancel
	compare(control.count, 1)
	var cancelButton = control.itemAt(0)
	verify(cancelButton)
	compare(cancelButton.text.toUpperCase(), "CANCEL")

	control.standardButtons = DialogButtonBox.Ok \| DialogButtonBox.Cancel
	compare(control.count, 2)
	if (control.itemAt(0).text.toUpperCase() === "OK") {
	okButton = control.itemAt(0)
	cancelButton = control.itemAt(1)
	} else {
	okButton = control.itemAt(1)
	cancelButton = control.itemAt(0)
	}
	verify(okButton)
	verify(cancelButton)
	compare(okButton.text.toUpperCase(), "OK")
	compare(cancelButton.text.toUpperCase(), "CANCEL")
	compare(control.standardButton(DialogButtonBox.Ok), okButton)
	compare(control.standardButton(DialogButtonBox.Cancel), cancelButton)

	control.standardButtons = 0
	compare(control.count, 0)

	compare(control.standardButton(DialogButtonBox.Ok), null)
	compare(control.standardButton(DialogButtonBox.Cancel), null)
	}

	function test_attached() {
	var control = createTemporaryObject(buttonBox, testCase)
	verify(control)

	control.standardButtons = DialogButtonBox.Ok
	var okButton = control.itemAt(0)
	compare(okButton.DialogButtonBox.buttonBox, control)
	compare(okButton.DialogButtonBox.buttonRole, DialogButtonBox.AcceptRole)

	var saveButton = button.createObject(control, {text: "Save"})
	compare(saveButton.DialogButtonBox.buttonBox, control)
	compare(saveButton.DialogButtonBox.buttonRole, DialogButtonBox.InvalidRole)
	saveButton.DialogButtonBox.buttonRole = DialogButtonBox.AcceptRole
	compare(saveButton.DialogButtonBox.buttonRole, DialogButtonBox.AcceptRole)

	var closeButton = createTemporaryObject(button, null, {text: "Save"})
	compare(closeButton.DialogButtonBox.buttonBox, null)
	compare(closeButton.DialogButtonBox.buttonRole, DialogButtonBox.InvalidRole)
	closeButton.DialogButtonBox.buttonRole = DialogButtonBox.DestructiveRole
	compare(closeButton.DialogButtonBox.buttonRole, DialogButtonBox.DestructiveRole)
	control.addItem(closeButton)
	compare(closeButton.DialogButtonBox.buttonBox, control)

	control.contentModel.clear()
	compare(okButton.DialogButtonBox.buttonBox, null)
	compare(saveButton.DialogButtonBox.buttonBox, null)
	compare(closeButton.DialogButtonBox.buttonBox, null)
	}

	function test_signals_data() {
	return [
	{ tag: "Ok", standardButton: DialogButtonBox.Ok, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
	{ tag: "Open", standardButton: DialogButtonBox.Open, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
	{ tag: "Save", standardButton: DialogButtonBox.Save, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
	{ tag: "Cancel", standardButton: DialogButtonBox.Cancel, buttonRole: DialogButtonBox.RejectRole, signalName: "rejected" },
	{ tag: "Close", standardButton: DialogButtonBox.Close, buttonRole: DialogButtonBox.RejectRole, signalName: "rejected" },
	{ tag: "Discard", standardButton: DialogButtonBox.Discard, buttonRole: DialogButtonBox.DestructiveRole, signalName: "discarded" },
	{ tag: "Apply", standardButton: DialogButtonBox.Apply, buttonRole: DialogButtonBox.ApplyRole, signalName: "applied" },
	{ tag: "Reset", standardButton: DialogButtonBox.Reset, buttonRole: DialogButtonBox.ResetRole, signalName: "reset" },
	{ tag: "RestoreDefaults", standardButton: DialogButtonBox.RestoreDefaults, buttonRole: DialogButtonBox.ResetRole, signalName: "reset" },
	{ tag: "Help", standardButton: DialogButtonBox.Help, buttonRole: DialogButtonBox.HelpRole, signalName: "helpRequested" },
	{ tag: "SaveAll", standardButton: DialogButtonBox.SaveAll, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
	{ tag: "Yes", standardButton: DialogButtonBox.Yes, buttonRole: DialogButtonBox.YesRole, signalName: "accepted" },
	{ tag: "YesToAll", standardButton: DialogButtonBox.YesToAll, buttonRole: DialogButtonBox.YesRole, signalName: "accepted" },
	{ tag: "No", standardButton: DialogButtonBox.No, buttonRole: DialogButtonBox.NoRole, signalName: "rejected" },
	{ tag: "NoToAll", standardButton: DialogButtonBox.NoToAll, buttonRole: DialogButtonBox.NoRole, signalName: "rejected" },
	{ tag: "Abort", standardButton: DialogButtonBox.Abort, buttonRole: DialogButtonBox.RejectRole, signalName: "rejected" },
	{ tag: "Retry", standardButton: DialogButtonBox.Retry, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" },
	{ tag: "Ignore", standardButton: DialogButtonBox.Ignore, buttonRole: DialogButtonBox.AcceptRole, signalName: "accepted" }
	]
	}

	function test_signals(data) {
	var control = createTemporaryObject(buttonBox, testCase)
	verify(control)

	control.standardButtons = data.standardButton
	compare(control.count, 1)
	var button = control.itemAt(0)
	verify(button)
	compare(button.DialogButtonBox.buttonRole, data.buttonRole)

	var clickedSpy = signalSpy.createObject(control, {target: control, signalName: "clicked"})
	verify(clickedSpy.valid)
	var roleSpy = signalSpy.createObject(control, {target: control, signalName: data.signalName})
	verify(roleSpy.valid)

	button.clicked()
	compare(clickedSpy.count, 1)
	compare(clickedSpy.signalArguments[0][0], button)
	compare(roleSpy.count, 1)
	}

	function test_buttonLayout_data() {
	return [
	{ tag: "WinLayout", buttonLayout: DialogButtonBox.WinLayout, button1Role: DialogButtonBox.AcceptRole, button2Role: DialogButtonBox.RejectRole },
	{ tag: "MacLayout", buttonLayout: DialogButtonBox.MacLayout, button1Role: DialogButtonBox.RejectRole, button2Role: DialogButtonBox.AcceptRole },
	{ tag: "KdeLayout", buttonLayout: DialogButtonBox.KdeLayout, button1Role: DialogButtonBox.AcceptRole, button2Role: DialogButtonBox.RejectRole },
	{ tag: "GnomeLayout", buttonLayout: DialogButtonBox.GnomeLayout, button1Role: DialogButtonBox.RejectRole, button2Role: DialogButtonBox.AcceptRole },
	{ tag: "AndroidLayout", buttonLayout: DialogButtonBox.AndroidLayout, button1Role: DialogButtonBox.RejectRole, button2Role: DialogButtonBox.AcceptRole }
	]
	}

	function test_buttonLayout(data) {
	var control = createTemporaryObject(buttonBox, testCase, {buttonLayout: data.buttonLayout, standardButtons: DialogButtonBox.Ok\|DialogButtonBox.Cancel})
	verify(control)

	compare(control.count, 2)

	var button1 = control.itemAt(0)
	verify(button1)
	compare(button1.DialogButtonBox.buttonRole, data.button1Role)

	var button2 = control.itemAt(1)
	verify(button2)
	compare(button2.DialogButtonBox.buttonRole, data.button2Role)
	}

	function test_implicitSize_data() {
	return [
	{ tag: "Ok", standardButtons: DialogButtonBox.Ok },
	{ tag: "Yes\|No", standardButtons: DialogButtonBox.Yes \| DialogButtonBox.No }
	]
	}

	// QTBUG-59719
	function test_implicitSize(data) {
	var control = createTemporaryObject(buttonBox, testCase, {standardButtons: data.standardButtons})
	verify(control)

	var listView = control.contentItem
	verify(listView && listView.hasOwnProperty("contentWidth"))
	waitForRendering(listView)

	var implicitContentWidth = control.leftPadding + control.rightPadding
	for (var i = 0; i < listView.contentItem.children.length; ++i) {
	var button = listView.contentItem.children[i]
	if (!button.hasOwnProperty("text"))
	continue
	implicitContentWidth += button.implicitWidth
	}

	verify(implicitContentWidth > control.leftPadding + control.rightPadding)
	verify(control.implicitWidth >= implicitContentWidth, qsTr("implicit width (%1) is less than content width (%2)").arg(control.implicitWidth).arg(implicitContentWidth))
	}

	Component {
	id: okCancelBox
	DialogButtonBox {
	Button {
	text: qsTr("OK")
	}
	Button {
	text: qsTr("Cancel")
	}
	}
	}

	function test_buttonSize() {
	var control = createTemporaryObject(okCancelBox, testCase)
	verify(control)

	var okButton = control.itemAt(0)
	verify(okButton)
	verify(okButton.width > 0)

	var cancelButton = control.itemAt(1)
	verify(cancelButton)
	verify(cancelButton.width > 0)

	compare(okButton.width + cancelButton.width, control.availableWidth - control.spacing)
	}

	function test_oneButtonInFixedWidthBox() {
	var control = createTemporaryObject(buttonBox, testCase,
	{ width: 400, standardButtons: Dialog.Close })
	verify(control)

	var listView = control.contentItem
	waitForRendering(listView)

	var button = control.itemAt(0)
	verify(button)

	// The button should never go outside of the box.
	tryVerify(function() { return button.mapToItem(control, 0, 0).x >= 0 },
	1000, "Expected left edge of button to be within left edge of DialogButtonBox (i.e. greater than or equal to 0)" +
	", but it's " + button.mapToItem(control, 0, 0).x)
	tryVerify(function() { return button.mapToItem(control, 0, 0).x + button.width <= control.width },
	1000, "Expected right edge of button to be within right edge of DialogButtonBox (i.e. less than or equal to " +
	control.width + "), but it's " + (button.mapToItem(control, 0, 0).x + button.width))
	}

	Component {
	id: dialogComponent
	// Based on the Default style, where a single button fills
	// half the dialog's width and is aligned to the right.
	Dialog {
	id: control
	standardButtons: Dialog.Ok
	visible: true

	footer: DialogButtonBox {
	id: box
	visible: count > 0
	alignment: count === 1 ? Qt.AlignRight : undefined

	implicitWidth: Math.max(implicitBackgroundWidth + leftInset + rightInset,
	(count === 1 ? implicitContentWidth * 2 : implicitContentWidth) + leftPadding + rightPadding)
	implicitHeight: Math.max(implicitBackgroundHeight + topInset + bottomInset,
	implicitContentHeight + topPadding + bottomPadding)
	contentWidth: contentItem.contentWidth

	delegate: Button {
	width: box.count === 1 ? box.availableWidth / 2 : undefined
	}
	}
	}
	}

	// QTBUG-73860
	function test_oneButtonAlignedRightInImplicitWidthBox() {
	var dialog = createTemporaryObject(dialogComponent, testCase)
	verify(dialog)

	var box = dialog.footer
	var listView = box.contentItem
	waitForRendering(listView)

	var button = box.itemAt(0)
	verify(button)

	// The button should never go outside of the box.
	tryVerify(function() { return button.mapToItem(box, 0, 0).x >= 0 },
	1000, "Expected left edge of button to be within left edge of DialogButtonBox (i.e. greater than or equal to 0)" +
	", but it's " + button.mapToItem(box, 0, 0).x)
	tryVerify(function() { return button.mapToItem(box, 0, 0).x + button.width <= box.width },
	1000, "Expected right edge of button to be within right edge of DialogButtonBox (i.e. less than or equal to " +
	box.width + "), but it's " + (button.mapToItem(box, 0, 0).x + button.width))
	compare(box.width, dialog.width)
	// There's a single button and we align it to the right.
	compare(box.contentItem.width, button.width)
	compare(box.contentItem.x, box.width - box.rightPadding - box.contentItem.width)
	}

	Component {
	id: customButtonBox

	DialogButtonBox {
	objectName: "customButtonBox"
	alignment: Qt.AlignRight

	property alias okButton: okButton

	Button {
	id: okButton
	text: "OK"

	DialogButtonBox.buttonRole: DialogButtonBox.AcceptRole
	}
	}
	}

	Component {
	id: customButtonBoxTwoButtons

	DialogButtonBox {
	objectName: "customButtonBoxTwoButtons"
	alignment: Qt.AlignRight

	property alias okButton: okButton

	Button {
	id: okButton
	text: "OK"

	DialogButtonBox.buttonRole: DialogButtonBox.AcceptRole
	}
	Button {
	text: "Cancel"

	DialogButtonBox.buttonRole: DialogButtonBox.RejectRole
	}
	}
	}

	function test_changeCustomButtonText_data() {
	return [
	{ tag: "oneButton", component: customButtonBox },
	{ tag: "twoButtons", component: customButtonBoxTwoButtons },
	]
	}

	// QTBUG-72886
	function test_changeCustomButtonText(data) {
	var control = createTemporaryObject(customButtonBox, testCase, {})
	verify(control)

	var listView = control.contentItem
	waitForRendering(listView)

	var button = control.okButton
	verify(button)
	button.text = "some longer text";

	// The button should never go outside of the box.
	tryVerify(function() { return button.mapToItem(control, 0, 0).x >= 0 },
	1000, "Expected left edge of button to be within left edge of DialogButtonBox (i.e. greater than or equal to 0)" +
	", but it's " + button.mapToItem(control, 0, 0).x)
	tryVerify(function() { return button.mapToItem(control, 0, 0).x + button.width <= control.width },
	1000, "Expected right edge of button to be within right edge of DialogButtonBox (i.e. less than or equal to " +
	control.width + "), but it's " + (button.mapToItem(control, 0, 0).x + button.width))
	}

	Component {
	id: noRolesDialog

	Dialog {
	footer: DialogButtonBox {
	Button { text: "A" }
	Button { text: "B" }
	Button { text: "C" }
	}
	}
	}

	function test_orderWithNoRoles() {
	for (var i = 0; i < 10; ++i) {
	var control = createTemporaryObject(noRolesDialog, testCase)
	verify(control)

	control.open()
	tryCompare(control, "opened", true)
	var footer = control.footer
	verify(footer)
	waitForRendering(footer)
	compare(footer.itemAt(0).text, "A")
	compare(footer.itemAt(1).text, "B")
	compare(footer.itemAt(2).text, "C")
	}
	}
	}