| /**************************************************************************** |
| ** |
| ** Copyright (C) 2017 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the test suite of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:BSD$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** BSD License Usage |
| ** Alternatively, you may use this file under the terms of the BSD license |
| ** as follows: |
| ** |
| ** "Redistribution and use in source and binary forms, with or without |
| ** modification, are permitted provided that the following conditions are |
| ** met: |
| ** * Redistributions of source code must retain the above copyright |
| ** notice, this list of conditions and the following disclaimer. |
| ** * Redistributions in binary form must reproduce the above copyright |
| ** notice, this list of conditions and the following disclaimer in |
| ** the documentation and/or other materials provided with the |
| ** distribution. |
| ** * Neither the name of The Qt Company Ltd nor the names of its |
| ** contributors may be used to endorse or promote products derived |
| ** from this software without specific prior written permission. |
| ** |
| ** |
| ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| import QtQuick 2.12 |
| import QtTest 1.0 |
| import QtQuick.Controls 2.12 |
| |
| TestCase { |
| id: testCase |
| width: 400 |
| height: 400 |
| visible: true |
| when: windowShown |
| name: "Slider" |
| |
| Component { |
| id: signalSpy |
| SignalSpy { } |
| } |
| |
| Component { |
| id: slider |
| Slider { } |
| } |
| |
| function test_defaults() { |
| var control = createTemporaryObject(slider, testCase) |
| verify(control) |
| |
| compare(control.stepSize, 0) |
| compare(control.snapMode, Slider.NoSnap) |
| compare(control.orientation, Qt.Horizontal) |
| compare(control.horizontal, true) |
| compare(control.vertical, false) |
| } |
| |
| function test_value() { |
| var control = createTemporaryObject(slider, testCase) |
| verify(control) |
| |
| compare(control.value, 0.0) |
| control.value = 0.5 |
| compare(control.value, 0.5) |
| control.value = 1.0 |
| compare(control.value, 1.0) |
| control.value = -1.0 |
| compare(control.value, 0.0) |
| control.value = 2.0 |
| compare(control.value, 1.0) |
| } |
| |
| function test_range() { |
| var control = createTemporaryObject(slider, testCase, {from: 0, to: 100, value: 50}) |
| verify(control) |
| |
| compare(control.from, 0) |
| compare(control.to, 100) |
| compare(control.value, 50) |
| compare(control.position, 0.5) |
| |
| control.value = 1000 |
| compare(control.value, 100) |
| compare(control.position, 1) |
| |
| control.value = -1 |
| compare(control.value, 0) |
| compare(control.position, 0) |
| |
| control.from = 25 |
| compare(control.from, 25) |
| compare(control.value, 25) |
| compare(control.position, 0) |
| |
| control.to = 75 |
| compare(control.to, 75) |
| compare(control.value, 25) |
| compare(control.position, 0) |
| |
| control.value = 50 |
| compare(control.value, 50) |
| compare(control.position, 0.5) |
| } |
| |
| function test_inverted() { |
| var control = createTemporaryObject(slider, testCase, {from: 1.0, to: -1.0}) |
| verify(control) |
| |
| compare(control.from, 1.0) |
| compare(control.to, -1.0) |
| compare(control.value, 0.0) |
| compare(control.position, 0.5) |
| |
| control.value = 2.0 |
| compare(control.value, 1.0) |
| compare(control.position, 0.0) |
| |
| control.value = -2.0 |
| compare(control.value, -1.0) |
| compare(control.position, 1.0) |
| |
| control.value = 0.0 |
| compare(control.value, 0.0) |
| compare(control.position, 0.5) |
| } |
| |
| function test_position() { |
| var control = createTemporaryObject(slider, testCase) |
| verify(control) |
| |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| |
| control.value = 0.25 |
| compare(control.value, 0.25) |
| compare(control.position, 0.25) |
| |
| control.value = 0.75 |
| compare(control.value, 0.75) |
| compare(control.position, 0.75) |
| } |
| |
| function test_visualPosition() { |
| var control = createTemporaryObject(slider, testCase) |
| verify(control) |
| |
| compare(control.value, 0.0) |
| compare(control.visualPosition, 0.0) |
| |
| control.value = 0.25 |
| compare(control.value, 0.25) |
| compare(control.visualPosition, 0.25) |
| |
| // RTL locale |
| control.locale = Qt.locale("ar_EG") |
| compare(control.visualPosition, 0.75) |
| |
| // RTL locale + LayoutMirroring |
| control.LayoutMirroring.enabled = true |
| compare(control.visualPosition, 0.75) |
| |
| // LTR locale + LayoutMirroring |
| control.locale = Qt.locale("en_US") |
| compare(control.visualPosition, 0.75) |
| |
| // LTR locale |
| control.LayoutMirroring.enabled = false |
| compare(control.visualPosition, 0.25) |
| |
| // LayoutMirroring |
| control.LayoutMirroring.enabled = true |
| compare(control.visualPosition, 0.75) |
| } |
| |
| function test_orientation() { |
| var control = createTemporaryObject(slider, testCase) |
| verify(control) |
| |
| compare(control.orientation, Qt.Horizontal) |
| compare(control.horizontal, true) |
| compare(control.vertical, false) |
| verify(control.width > control.height) |
| |
| control.orientation = Qt.Vertical |
| compare(control.orientation, Qt.Vertical) |
| compare(control.horizontal, false) |
| compare(control.vertical, true) |
| verify(control.width < control.height) |
| } |
| |
| function test_mouse_data() { |
| return [ |
| { tag: "horizontal", orientation: Qt.Horizontal, live: false }, |
| { tag: "vertical", orientation: Qt.Vertical, live: false }, |
| { tag: "horizontal:live", orientation: Qt.Horizontal, live: true }, |
| { tag: "vertical:live", orientation: Qt.Vertical, live: true } |
| ] |
| } |
| |
| function test_mouse(data) { |
| var control = createTemporaryObject(slider, testCase, {orientation: data.orientation, live: data.live}) |
| verify(control) |
| |
| var pressedCount = 0 |
| var movedCount = 0 |
| |
| var pressedSpy = signalSpy.createObject(control, {target: control, signalName: "pressedChanged"}) |
| verify(pressedSpy.valid) |
| |
| var movedSpy = signalSpy.createObject(control, {target: control, signalName: "moved"}) |
| verify(movedSpy.valid) |
| |
| mousePress(control, 0, control.height, Qt.LeftButton) |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| |
| // mininum on the left in horizontal vs. at the bottom in vertical |
| mouseMove(control, -control.width, 2 * control.height, 0) |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| |
| mouseMove(control, control.width * 0.5, control.height * 0.5, 0) |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, true) |
| compare(control.value, data.live ? 0.5 : 0.0) |
| compare(control.position, 0.5) |
| |
| mouseRelease(control, control.width * 0.5, control.height * 0.5, Qt.LeftButton) |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, false) |
| compare(control.value, 0.5) |
| compare(control.position, 0.5) |
| |
| mousePress(control, control.width, 0, Qt.LeftButton) |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, true) |
| compare(control.value, data.live ? 1.0 : 0.5) |
| compare(control.position, 1.0) |
| |
| // maximum on the right in horizontal vs. at the top in vertical |
| mouseMove(control, control.width * 2, -control.height, 0) |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, true) |
| compare(control.value, data.live ? 1.0 : 0.5) |
| compare(control.position, 1.0) |
| |
| mouseMove(control, control.width * 0.75, control.height * 0.25, 0) |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, true) |
| compare(control.value, data.live ? control.position : 0.5) |
| verify(control.position >= 0.75) |
| |
| mouseRelease(control, control.width * 0.25, control.height * 0.75, Qt.LeftButton) |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, false) |
| compare(control.value, control.position) |
| verify(control.value <= 0.25 && control.value >= 0.0) |
| verify(control.position <= 0.25 && control.position >= 0.0) |
| |
| // QTBUG-53846 |
| mouseClick(control, control.width * 0.5, control.height * 0.5, Qt.LeftButton) |
| compare(movedSpy.count, ++movedCount) |
| compare(pressedSpy.count, pressedCount += 2) |
| compare(control.value, 0.5) |
| compare(control.position, 0.5) |
| } |
| |
| function test_touch_data() { |
| return [ |
| { tag: "horizontal", orientation: Qt.Horizontal, live: false }, |
| { tag: "vertical", orientation: Qt.Vertical, live: false }, |
| { tag: "horizontal:live", orientation: Qt.Horizontal, live: true }, |
| { tag: "vertical:live", orientation: Qt.Vertical, live: true } |
| ] |
| } |
| |
| function test_touch(data) { |
| var control = createTemporaryObject(slider, testCase, {orientation: data.orientation, live: data.live}) |
| verify(control) |
| |
| var pressedCount = 0 |
| var movedCount = 0 |
| |
| var pressedSpy = signalSpy.createObject(control, {target: control, signalName: "pressedChanged"}) |
| verify(pressedSpy.valid) |
| |
| var movedSpy = signalSpy.createObject(control, {target: control, signalName: "moved"}) |
| verify(movedSpy.valid) |
| |
| var touch = touchEvent(control) |
| touch.press(0, control, 0, 0).commit() |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| |
| // mininum on the left in horizontal vs. at the bottom in vertical |
| touch.move(0, control, -control.width, 2 * control.height, 0).commit() |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| |
| touch.move(0, control, control.width * 0.5, control.height * 0.5, 0).commit() |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, true) |
| compare(control.value, data.live ? 0.5 : 0.0) |
| compare(control.position, 0.5) |
| |
| touch.release(0, control, control.width * 0.5, control.height * 0.5).commit() |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, false) |
| compare(control.value, 0.5) |
| compare(control.position, 0.5) |
| |
| touch.press(0, control, control.width, control.height).commit() |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, true) |
| compare(control.value, 0.5) |
| compare(control.position, 0.5) |
| |
| // maximum on the right in horizontal vs. at the top in vertical |
| touch.move(0, control, control.width * 2, -control.height, 0).commit() |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, true) |
| compare(control.value, data.live ? 1.0 : 0.5) |
| compare(control.position, 1.0) |
| |
| touch.move(0, control, control.width * 0.75, control.height * 0.25, 0).commit() |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, true) |
| compare(control.value, data.live ? control.position : 0.5) |
| verify(control.position >= 0.75) |
| |
| touch.release(0, control, control.width * 0.25, control.height * 0.75).commit() |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, false) |
| compare(control.value, control.position) |
| verify(control.value <= 0.25 && control.value >= 0.0) |
| verify(control.position <= 0.25 && control.position >= 0.0) |
| |
| // QTBUG-53846 |
| touch.press(0, control).commit().release(0, control).commit() |
| compare(movedSpy.count, ++movedCount) |
| compare(pressedSpy.count, pressedCount += 2) |
| compare(control.value, 0.5) |
| compare(control.position, 0.5) |
| } |
| |
| function test_multiTouch() { |
| var control1 = createTemporaryObject(slider, testCase, {live: false}) |
| verify(control1) |
| |
| var pressedCount1 = 0 |
| var movedCount1 = 0 |
| |
| var pressedSpy1 = signalSpy.createObject(control1, {target: control1, signalName: "pressedChanged"}) |
| verify(pressedSpy1.valid) |
| |
| var movedSpy1 = signalSpy.createObject(control1, {target: control1, signalName: "moved"}) |
| verify(movedSpy1.valid) |
| |
| var touch = touchEvent(control1) |
| touch.press(0, control1, 0, 0).commit().move(0, control1, control1.width, control1.height).commit() |
| |
| compare(pressedSpy1.count, ++pressedCount1) |
| compare(movedSpy1.count, ++movedCount1) |
| compare(control1.pressed, true) |
| compare(control1.position, 1.0) |
| |
| // second touch point on the same control is ignored |
| touch.stationary(0).press(1, control1, 0, 0).commit() |
| touch.stationary(0).move(1, control1).commit() |
| touch.stationary(0).release(1).commit() |
| |
| compare(pressedSpy1.count, pressedCount1) |
| compare(movedSpy1.count, movedCount1) |
| compare(control1.pressed, true) |
| compare(control1.position, 1.0) |
| |
| var control2 = createTemporaryObject(slider, testCase, {y: control1.height, live: false}) |
| verify(control2) |
| |
| var pressedCount2 = 0 |
| var movedCount2 = 0 |
| |
| var pressedSpy2 = signalSpy.createObject(control2, {target: control2, signalName: "pressedChanged"}) |
| verify(pressedSpy2.valid) |
| |
| var movedSpy2 = signalSpy.createObject(control2, {target: control2, signalName: "moved"}) |
| verify(movedSpy2.valid) |
| |
| // press the second slider |
| touch.stationary(0).press(2, control2, 0, 0).commit() |
| |
| compare(pressedSpy2.count, ++pressedCount2) |
| compare(movedSpy2.count, movedCount2) |
| compare(control2.pressed, true) |
| compare(control2.position, 0.0) |
| |
| compare(pressedSpy1.count, pressedCount1) |
| compare(movedSpy1.count, movedCount1) |
| compare(control1.pressed, true) |
| compare(control1.position, 1.0) |
| |
| // move both sliders |
| touch.move(0, control1).move(2, control2).commit() |
| |
| compare(pressedSpy2.count, pressedCount2) |
| compare(movedSpy2.count, ++movedCount2) |
| compare(control2.pressed, true) |
| compare(control2.position, 0.5) |
| compare(control2.value, 0.0) |
| |
| compare(pressedSpy1.count, pressedCount1) |
| compare(movedSpy1.count, ++movedCount1) |
| compare(control1.pressed, true) |
| compare(control1.position, 0.5) |
| compare(control1.value, 0.0) |
| |
| // release both sliders |
| touch.release(0, control1).release(2, control2).commit() |
| |
| compare(pressedSpy2.count, ++pressedCount2) |
| compare(movedSpy2.count, movedCount2) |
| compare(control2.pressed, false) |
| compare(control2.position, 0.5) |
| compare(control2.value, 0.5) |
| |
| compare(pressedSpy1.count, ++pressedCount1) |
| compare(movedSpy1.count, movedCount1) |
| compare(control1.pressed, false) |
| compare(control1.position, 0.5) |
| compare(control1.value, 0.5) |
| } |
| |
| function test_keys_data() { |
| return [ |
| { tag: "horizontal", orientation: Qt.Horizontal, decrease: Qt.Key_Left, increase: Qt.Key_Right }, |
| { tag: "vertical", orientation: Qt.Vertical, decrease: Qt.Key_Down, increase: Qt.Key_Up } |
| ] |
| } |
| |
| function test_keys(data) { |
| var control = createTemporaryObject(slider, testCase, {orientation: data.orientation}) |
| verify(control) |
| |
| var pressedCount = 0 |
| var movedCount = 0 |
| |
| var pressedSpy = signalSpy.createObject(control, {target: control, signalName: "pressedChanged"}) |
| verify(pressedSpy.valid) |
| |
| var movedSpy = signalSpy.createObject(control, {target: control, signalName: "moved"}) |
| verify(movedSpy.valid) |
| |
| control.forceActiveFocus() |
| verify(control.activeFocus) |
| |
| var oldValue = 0.0 |
| control.value = 0.5 |
| |
| for (var d1 = 1; d1 <= 10; ++d1) { |
| oldValue = control.value |
| keyPress(data.decrease) |
| compare(control.pressed, true) |
| compare(pressedSpy.count, ++pressedCount) |
| if (oldValue !== control.value) |
| compare(movedSpy.count, ++movedCount) |
| |
| compare(control.value, Math.max(0.0, 0.5 - d1 * 0.1)) |
| compare(control.value, control.position) |
| |
| keyRelease(data.decrease) |
| compare(control.pressed, false) |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| } |
| |
| for (var i1 = 1; i1 <= 20; ++i1) { |
| oldValue = control.value |
| keyPress(data.increase) |
| compare(control.pressed, true) |
| compare(pressedSpy.count, ++pressedCount) |
| if (oldValue !== control.value) |
| compare(movedSpy.count, ++movedCount) |
| |
| compare(control.value, Math.min(1.0, 0.0 + i1 * 0.1)) |
| compare(control.value, control.position) |
| |
| keyRelease(data.increase) |
| compare(control.pressed, false) |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| } |
| |
| control.stepSize = 0.25 |
| |
| for (var d2 = 1; d2 <= 10; ++d2) { |
| oldValue = control.value |
| keyPress(data.decrease) |
| compare(control.pressed, true) |
| compare(pressedSpy.count, ++pressedCount) |
| if (oldValue !== control.value) |
| compare(movedSpy.count, ++movedCount) |
| |
| compare(control.value, Math.max(0.0, 1.0 - d2 * 0.25)) |
| compare(control.value, control.position) |
| |
| keyRelease(data.decrease) |
| compare(control.pressed, false) |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| } |
| |
| for (var i2 = 1; i2 <= 10; ++i2) { |
| oldValue = control.value |
| keyPress(data.increase) |
| compare(control.pressed, true) |
| compare(pressedSpy.count, ++pressedCount) |
| if (oldValue !== control.value) |
| compare(movedSpy.count, ++movedCount) |
| |
| compare(control.value, Math.min(1.0, 0.0 + i2 * 0.25)) |
| compare(control.value, control.position) |
| |
| keyRelease(data.increase) |
| compare(control.pressed, false) |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| } |
| } |
| |
| function test_padding() { |
| // test with "unbalanced" paddings (left padding != right padding) to ensure |
| // that the slider position calculation is done taking padding into account |
| // ==> the position is _not_ 0.5 in the middle of the control |
| var control = createTemporaryObject(slider, testCase, {leftPadding: 10, rightPadding: 20, live: false}) |
| verify(control) |
| |
| var pressedSpy = signalSpy.createObject(control, {target: control, signalName: "pressedChanged"}) |
| verify(pressedSpy.valid) |
| |
| mousePress(control, 0, 0, Qt.LeftButton) |
| compare(pressedSpy.count, 1) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| compare(control.visualPosition, 0.0) |
| |
| mouseMove(control, control.leftPadding + control.availableWidth * 0.5, control.height * 0.5, 0) |
| compare(pressedSpy.count, 1) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| compare(control.position, 0.5) |
| compare(control.visualPosition, 0.5) |
| |
| mouseMove(control, control.width * 0.5, control.height * 0.5, 0) |
| compare(pressedSpy.count, 1) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| verify(control.position > 0.5) |
| verify(control.visualPosition > 0.5) |
| |
| mouseRelease(control, control.leftPadding + control.availableWidth * 0.5, control.height * 0.5, Qt.LeftButton) |
| compare(pressedSpy.count, 2) |
| compare(control.pressed, false) |
| compare(control.value, 0.5) |
| compare(control.position, 0.5) |
| compare(control.visualPosition, 0.5) |
| |
| // RTL |
| control.value = 0 |
| control.locale = Qt.locale("ar_EG") |
| |
| mousePress(control, 0, 0, Qt.LeftButton) |
| compare(pressedSpy.count, 3) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| compare(control.position, 1.0) |
| compare(control.visualPosition, 0.0) |
| |
| mouseMove(control, control.leftPadding + control.availableWidth * 0.5, control.height * 0.5, 0) |
| compare(pressedSpy.count, 3) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| compare(control.position, 0.5) |
| compare(control.visualPosition, 0.5) |
| |
| mouseMove(control, control.width * 0.5, control.height * 0.5, 0) |
| compare(pressedSpy.count, 3) |
| compare(control.pressed, true) |
| compare(control.value, 0.0) |
| verify(control.position < 0.5) |
| verify(control.visualPosition > 0.5) |
| |
| mouseRelease(control, control.leftPadding + control.availableWidth * 0.5, control.height * 0.5, Qt.LeftButton) |
| compare(pressedSpy.count, 4) |
| compare(control.pressed, false) |
| compare(control.value, 0.5) |
| compare(control.position, 0.5) |
| compare(control.visualPosition, 0.5) |
| } |
| |
| function test_snapMode_data(immediate) { |
| return [ |
| { tag: "NoSnap", snapMode: Slider.NoSnap, from: 0, to: 2, values: [0, 0, 0.25], positions: [0, 0.1, 0.1] }, |
| { tag: "SnapAlways (0..2)", snapMode: Slider.SnapAlways, from: 0, to: 2, values: [0.0, 0.0, 0.2], positions: [0.0, 0.1, 0.1] }, |
| { tag: "SnapAlways (1..3)", snapMode: Slider.SnapAlways, from: 1, to: 3, values: [1.0, 1.0, 1.2], positions: [0.0, 0.1, 0.1] }, |
| { tag: "SnapAlways (-1..1)", snapMode: Slider.SnapAlways, from: -1, to: 1, values: [0.0, 0.0, -0.8], positions: [immediate ? 0.0 : 0.5, 0.1, 0.1] }, |
| { tag: "SnapAlways (1..-1)", snapMode: Slider.SnapAlways, from: 1, to: -1, values: [0.0, 0.0, 0.8], positions: [immediate ? 0.0 : 0.5, 0.1, 0.1] }, |
| { tag: "SnapOnRelease (0..2)", snapMode: Slider.SnapOnRelease, from: 0, to: 2, values: [0.0, 0.0, 0.2], positions: [0.0, 0.1, 0.1] }, |
| { tag: "SnapOnRelease (1..3)", snapMode: Slider.SnapOnRelease, from: 1, to: 3, values: [1.0, 1.0, 1.2], positions: [0.0, 0.1, 0.1] }, |
| { tag: "SnapOnRelease (-1..1)", snapMode: Slider.SnapOnRelease, from: -1, to: 1, values: [0.0, 0.0, -0.8], positions: [immediate ? 0.0 : 0.5, 0.1, 0.1] }, |
| { tag: "SnapOnRelease (1..-1)", snapMode: Slider.SnapOnRelease, from: 1, to: -1, values: [0.0, 0.0, 0.8], positions: [immediate ? 0.0 : 0.5, 0.1, 0.1] } |
| ] |
| } |
| |
| function test_snapMode_mouse_data() { |
| return test_snapMode_data(true) |
| } |
| |
| function test_snapMode_mouse(data) { |
| var control = createTemporaryObject(slider, testCase, {live: false, snapMode: data.snapMode, from: data.from, to: data.to, stepSize: 0.2}) |
| verify(control) |
| |
| var fuzz = 0.05 |
| |
| mousePress(control, control.leftPadding) |
| compare(control.value, data.values[0]) |
| compare(control.position, data.positions[0]) |
| |
| mouseMove(control, control.leftPadding + 0.15 * (control.availableWidth + control.handle.width / 2)) |
| |
| fuzzyCompare(control.value, data.values[1], fuzz) |
| fuzzyCompare(control.position, data.positions[1], fuzz) |
| |
| mouseRelease(control, control.leftPadding + 0.15 * (control.availableWidth + control.handle.width / 2)) |
| fuzzyCompare(control.value, data.values[2], fuzz) |
| fuzzyCompare(control.position, data.positions[2], fuzz) |
| } |
| |
| function test_snapMode_touch_data() { |
| return test_snapMode_data(false) |
| } |
| |
| function test_snapMode_touch(data) { |
| var control = createTemporaryObject(slider, testCase, {live: false, snapMode: data.snapMode, from: data.from, to: data.to, stepSize: 0.2}) |
| verify(control) |
| |
| var fuzz = 0.05 |
| |
| var touch = touchEvent(control) |
| touch.press(0, control, control.leftPadding).commit() |
| compare(control.value, data.values[0]) |
| compare(control.position, data.positions[0]) |
| |
| touch.move(0, control, control.leftPadding + 0.15 * (control.availableWidth + control.handle.width / 2)).commit() |
| |
| fuzzyCompare(control.value, data.values[1], fuzz) |
| fuzzyCompare(control.position, data.positions[1], fuzz) |
| |
| touch.release(0, control, control.leftPadding + 0.15 * (control.availableWidth + control.handle.width / 2)).commit() |
| fuzzyCompare(control.value, data.values[2], fuzz) |
| fuzzyCompare(control.position, data.positions[2], fuzz) |
| } |
| |
| function test_wheel_data() { |
| return [ |
| { tag: "horizontal", orientation: Qt.Horizontal, dx: 120, dy: 0 }, |
| { tag: "vertical", orientation: Qt.Vertical, dx: 0, dy: 120 } |
| ] |
| } |
| |
| function test_wheel(data) { |
| var control = createTemporaryObject(slider, testCase, {wheelEnabled: true, orientation: data.orientation}) |
| verify(control) |
| |
| var movedCount = 0 |
| var movedSpy = signalSpy.createObject(control, {target: control, signalName: "moved"}) |
| verify(movedSpy.valid) |
| |
| compare(control.value, 0.0) |
| |
| mouseWheel(control, control.width / 2, control.height / 2, data.dx, data.dy) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.value, 0.1) |
| compare(control.position, 0.1) |
| |
| control.stepSize = 0.2 |
| |
| mouseWheel(control, control.width / 2, control.height / 2, data.dx, data.dy) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.value, 0.3) |
| compare(control.position, 0.3) |
| |
| control.stepSize = 10.0 |
| |
| mouseWheel(control, control.width / 2, control.height / 2, -data.dx, -data.dy) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| |
| // no change |
| mouseWheel(control, control.width / 2, control.height / 2, -data.dx, -data.dy) |
| compare(movedSpy.count, movedCount) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| |
| control.to = 10.0 |
| control.stepSize = 5.0 |
| |
| mouseWheel(control, control.width / 2, control.height / 2, data.dx, data.dy) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.value, 5.0) |
| compare(control.position, 0.5) |
| |
| mouseWheel(control, control.width / 2, control.height / 2, 0.5 * data.dx, 0.5 * data.dy) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.value, 7.5) |
| compare(control.position, 0.75) |
| |
| mouseWheel(control, control.width / 2, control.height / 2, -data.dx, -data.dy) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.value, 2.5) |
| compare(control.position, 0.25) |
| } |
| |
| function test_wheelPropagation_data() { |
| return [ |
| { tag: "horizontal", orientation: Qt.Horizontal, dx: 120, dy: 0 }, |
| { tag: "vertical", orientation: Qt.Vertical, dx: 0, dy: 120 } |
| ] |
| } |
| |
| Component { |
| id: mouseAreaComponent |
| MouseArea {} |
| } |
| |
| function test_wheelPropagation(data) { |
| var mouseArea = createTemporaryObject(mouseAreaComponent, testCase, { width: parent.width, height: parent.height }) |
| verify(mouseArea) |
| |
| var mouseAreaWheelSpy = signalSpy.createObject(mouseArea, { target: mouseArea, signalName: "wheel" }) |
| verify(mouseAreaWheelSpy.valid) |
| |
| var control = createTemporaryObject(slider, mouseArea, |
| { wheelEnabled: true, orientation: data.orientation, stepSize: 1 }) |
| verify(control) |
| compare(control.value, 0.0) |
| |
| var movedCount = 0 |
| var movedSpy = signalSpy.createObject(control, { target: control, signalName: "moved" }) |
| verify(movedSpy.valid) |
| |
| // Scroll the handle to the edge. |
| mouseWheel(control, control.width / 2, control.height / 2, data.dx, data.dy) |
| compare(control.value, 1.0) |
| compare(control.position, 1.0) |
| compare(movedSpy.count, ++movedCount) |
| compare(mouseAreaWheelSpy.count, 0) |
| |
| // Scroll again; the wheel event shouldn't go through to the MouseArea parent. |
| mouseWheel(control, control.width / 2, control.height / 2, data.dx, data.dy) |
| compare(control.value, 1.0) |
| compare(control.position, 1.0) |
| compare(movedSpy.count, movedCount) |
| compare(mouseAreaWheelSpy.count, 0) |
| |
| // Scroll the handle to the other edge. |
| mouseWheel(control, control.width / 2, control.height / 2, -data.dx, -data.dy) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| compare(movedSpy.count, ++movedCount) |
| compare(mouseAreaWheelSpy.count, 0) |
| |
| // Scroll again; the wheel event shouldn't go through to the MouseArea parent. |
| mouseWheel(control, control.width / 2, control.height / 2, -data.dx, -data.dy) |
| compare(control.value, 0.0) |
| compare(control.position, 0.0) |
| compare(movedSpy.count, movedCount) |
| compare(mouseAreaWheelSpy.count, 0) |
| } |
| |
| function test_valueAt_data() { |
| return [ |
| { tag: "0.0..1.0", from: 0.0, to: 1.0, values: [0.0, 0.2, 0.5, 1.0] }, |
| { tag: "0..100", from: 0, to: 100, values: [0, 20, 50, 100] }, |
| { tag: "100..-100", from: 100, to: -100, values: [100, 60, 0, -100] }, |
| { tag: "-7..7", from: -7, to: 7, stepSize: 1.0, values: [-7.0, -4.0, 0.0, 7.0] }, |
| { tag: "-3..7", from: -3, to: 7, stepSize: 5.0, values: [-3.0, -3.0, 2.0, 7.0] }, |
| ] |
| } |
| |
| function test_valueAt(data) { |
| var control = createTemporaryObject(slider, testCase, {from: data.from, to: data.to, stepSize: data.stepSize}) |
| verify(control) |
| |
| compare(control.valueAt(0.0), data.values[0]) |
| compare(control.valueAt(0.2), data.values[1]) |
| compare(control.valueAt(0.5), data.values[2]) |
| compare(control.valueAt(1.0), data.values[3]) |
| } |
| |
| function test_nullHandle() { |
| var control = createTemporaryObject(slider, testCase) |
| verify(control) |
| |
| control.handle = null |
| |
| mousePress(control) |
| verify(control.pressed, true) |
| |
| mouseRelease(control) |
| compare(control.pressed, false) |
| } |
| |
| function test_touchDragThreshold_data() { |
| var d1 = 3; var d2 = 7; |
| return [ |
| { tag: "horizontal", orientation: Qt.Horizontal, dx1: d1, dy1: 0, dx2: d2, dy2: 0 }, |
| { tag: "vertical", orientation: Qt.Vertical, dx1: 0, dy1: -d1, dx2: 0, dy2: -d2 }, |
| { tag: "horizontal2", orientation: Qt.Horizontal, dx1: -d1, dy1: 0, dx2: -d2, dy2: 0 }, |
| { tag: "vertical2", orientation: Qt.Vertical, dx1: 0, dy1: d1, dx2: 0, dy2: d2 } |
| ] |
| } |
| |
| function test_touchDragThreshold(data) { |
| var control = createTemporaryObject(slider, testCase, {touchDragThreshold: 10, live: true, orientation: data.orientation, value: 0.5}) |
| verify(control) |
| compare(control.touchDragThreshold, 10) |
| |
| var valueChangedCount = 0 |
| var valueChangedSpy = signalSpy.createObject(control, {target: control, signalName: "touchDragThresholdChanged"}) |
| verify(valueChangedSpy.valid) |
| |
| control.touchDragThreshold = undefined |
| compare(control.touchDragThreshold, -1) // reset to -1 |
| compare(valueChangedSpy.count, ++valueChangedCount) |
| |
| var t = 5 |
| control.touchDragThreshold = t |
| compare(control.touchDragThreshold, t) |
| compare(valueChangedSpy.count, ++valueChangedCount) |
| |
| control.touchDragThreshold = t |
| compare(control.touchDragThreshold, t) |
| compare(valueChangedSpy.count, valueChangedCount) |
| |
| var pressedCount = 0 |
| var movedCount = 0 |
| |
| var pressedSpy = signalSpy.createObject(control, {target: control, signalName: "pressedChanged"}) |
| verify(pressedSpy.valid) |
| |
| var movedSpy = signalSpy.createObject(control, {target: control, signalName: "moved"}) |
| verify(movedSpy.valid) |
| |
| var touch = touchEvent(control) |
| var x0 = control.handle.x + control.handle.width * 0.5 |
| var y0 = control.handle.y + control.handle.height * 0.5 |
| touch.press(0, control, x0, y0).commit() |
| compare(pressedSpy.count, ++pressedCount) |
| compare(movedSpy.count, movedCount) |
| compare(control.pressed, true) |
| |
| touch.move(0, control, x0 + data.dx1, y0 + data.dy1).commit() |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, movedCount) // shouldn't move |
| compare(control.pressed, true) |
| |
| touch.move(0, control, x0 + data.dx2, y0 + data.dy2).commit() |
| compare(pressedSpy.count, pressedCount) |
| compare(movedSpy.count, ++movedCount) |
| compare(control.pressed, true) |
| |
| touch.release(0, control, x0 + data.dx2, y0 + data.dy2).commit() |
| } |
| } |
