| /**************************************************************************** |
| ** |
| ** Copyright (C) 2016 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the Qt Mobility Components. |
| ** |
| ** $QT_BEGIN_LICENSE:GPL-EXCEPT$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** GNU General Public License Usage |
| ** Alternatively, this file may be used under the terms of the GNU |
| ** General Public License version 3 as published by the Free Software |
| ** Foundation with exceptions as appearing in the file LICENSE.GPL3-EXCEPT |
| ** included in the packaging of this file. Please review the following |
| ** information to ensure the GNU General Public License requirements will |
| ** be met: https://www.gnu.org/licenses/gpl-3.0.html. |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| //include("product.qtx") |
| //include("extrafunctions.qtt") |
| |
| //TESTED_COMPONENT=src/sensors/gestures |
| |
| testcase = { |
| |
| /* |
| init: function() { |
| qtuitest.checkActiveWindow = false; |
| qtuitest.autoTerminate = false; |
| wait(500); |
| unlock(); |
| wait(500); |
| }, |
| |
| |
| cleanup: function() { |
| print("Cleanup test function"); |
| unlock(); |
| wait(500); |
| Gesture.swipe(Screen.leftCenter(), Screen.rightCenter()); //close applicatin |
| wait(500); |
| }, |
| */ |
| |
| // As a QML Application developer I need to be able to list sensor gesture plugins |
| List_Sensor_Gestures: function() |
| { |
| // Test meta data |
| testApplication = "Gesture"; |
| testBinary = "Gesture"; // Running QML using qmlrunner will insert test app binary name when compiled |
| testGoal = "Verify a list of all registered sensor gesture plugins"; |
| testPreconditions = "Nil."; |
| testGroups = "5.0"; |
| |
| // Test steps |
| // mouseClick(findByProperty("label", testBinary)); wait(500); |
| prompt(twiki("---+++ " + testApplication + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Observe the list of all gestures shown in the top menu | Verify that the expected gestures are displayed | |
| ")); |
| }, |
| |
| // As a QML Application developer I need to be able to select a sensor gesture plugin |
| Select_Sensor_Gesture: function() |
| { |
| // Test meta data |
| testApplication = "Gesture"; |
| testBinary = "Gesture"; |
| testGoal = "Verify selection of a sensor gesture plugin"; |
| testPreconditions = "Nil."; |
| testGroups = "5.0"; |
| |
| // Test steps |
| // mouseClick(findByProperty("label", testBinary)); wait(500); |
| prompt(twiki("---+++ " + testApplication + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Select the QtSensors.shake gesture from the gesture list | Verify the QtSensors.shake gesture becomes highlighted and the detection menu now has the title *QtSensors.shake* | |
| ")); |
| }, |
| |
| // As a QML Application developer I need to be able to trigger a sensor gesture plugins |
| Trigger_Sensor_Gesture: function() |
| { |
| // Test meta data |
| testApplication = "Gesture"; |
| testBinary = "Gesture"; |
| testGoal = "Verify that a sensor gesture is triggered"; |
| testPreconditions = "Nil."; |
| testGroups = "5.0"; |
| |
| // Test steps |
| // mouseClick(findByProperty("label", testBinary)); wait(500); |
| prompt(twiki("---+++ " + testApplication + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Select the QtSensors.shake gesture from the gesture list and press *start* on the detection menu | Verify that *start* button now reads *stop* and is highlighted | |
| | Shake the phone more than 3 times in the X axis | Verify that shake detections are registered | |
| ")); |
| }, |
| |
| // Sensor gestures are not triggered by false positives |
| Sensor_Gesture_False_Positives: function() |
| { |
| // Test meta data |
| testApplication = "ShakeIt!"; |
| testBinary = "ShakeIt!"; |
| testGoal = "Verify that a sensor gesture doesn't trigger falsely"; |
| testPreconditions = "Nil."; |
| testGroups = "5.0"; |
| |
| // Test steps |
| // mouseClick(findByProperty("label", testBinary)); wait(500); |
| prompt(twiki("---+++ " + testApplication + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | | The display shows* Shake to rotate the triangles* and three tringles are below that | |
| | Perform the *Shake* gesture | Verify that *Shake* is displayed and the triangles rotate | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Slam* gesture | Verify that *Slam* is displayed and the triangles move out from the center of the display | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Whip* gesture | Verify that the *Whip* is displayed | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Hover* gesture | Verify that the *hover* is displayed and the triangles move to the top of the display | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Cover* gesture | Verify that the *Cover* is displayed and the triangles go to the bottom of the display | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Twist Left* gesture | Verify that the *TwistLeft* is displayed and the triangles move to the left | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Twist Right* gesture | Verify that the *TwistRight* is displayed and the triangles move to the right | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Pickup* gesture | Verify that the *Pickup* is displayed | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Turnover* gesture | Verify that the turnover chime is played | |
| | Turn over and wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| | Perform the *Double Tap* gesture | Verify that the *Double Tap* is displayed | |
| | | Verify no other gestures register at the same time | |
| | Wait for 3 seconds while observing the display | Verify the display now reads *Try another gesture* and the triangles return to the center of the display | |
| ")); |
| }, |
| } |