| # |
| # qmake configuration for Jetson TX1 boards running 64-bit Linux For Tegra |
| # (tested with R24.2, sample root filesystem) |
| # |
| # Note that this environment has been tested with X11 only. |
| # |
| # A typical configure line might look like the following: |
| # |
| # configure \ |
| # -device linux-jetson-tx1-g++ \ |
| # -device-option CROSS_COMPILE=/opt/gcc-linaro-5.3.1-2016.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu- \ |
| # -sysroot /opt/Linux_for_Tegra/rootfs |
| # |
| # Note that this builds for GLX + OpenGL. To use EGL + OpenGL ES instead, pass |
| # -opengl es2 and ensure the rootfs has the headers (rootfs/usr/include/EGL, |
| # GLES2, GLES3), which may not be the case out of the box. |
| # |
| # Check the configure output carefully, some features may be disabled due to the |
| # rootfs not having the necessary dev files. |
| # |
| # If getting cryptic linker errors from static libs like libm.a, check that the |
| # symlinks libm.so, libz.so, etc. under rootfs/usr/lib/aarch64-linux-gnu are not |
| # broken. If they are, due to using absolute paths, change them so that they are |
| # relative to rootfs. |
| |
| include(../common/linux_device_pre.conf) |
| |
| QMAKE_INCDIR_POST += \ |
| $$[QT_SYSROOT]/usr/include \ |
| $$[QT_SYSROOT]/usr/include/aarch64-linux-gnu |
| |
| QMAKE_LIBDIR_POST += \ |
| $$[QT_SYSROOT]/usr/lib \ |
| $$[QT_SYSROOT]/lib/aarch64-linux-gnu \ |
| $$[QT_SYSROOT]/usr/lib/aarch64-linux-gnu |
| |
| QMAKE_RPATHLINKDIR_POST += \ |
| $$[QT_SYSROOT]/usr/lib \ |
| $$[QT_SYSROOT]/usr/lib/aarch64-linux-gnu \ |
| $$[QT_SYSROOT]/usr/lib/aarch64-linux-gnu/tegra \ |
| $$[QT_SYSROOT]/lib/aarch64-linux-gnu |
| |
| DISTRO_OPTS += aarch64 |
| COMPILER_FLAGS += -mtune=cortex-a57.cortex-a53 -march=armv8-a |
| |
| # When configured with -opengl es2, eglfs will be functional with its |
| # dummy fullscreen X11 backend, in addition to xcb. |
| EGLFS_DEVICE_INTEGRATION = eglfs_x11 |
| |
| include(../common/linux_arm_device_post.conf) |
| load(qt_config) |