blob: e4d854471db48ec7d72771162a01027e44117a79 [file] [log] [blame]
/****************************************************************************
**
** Copyright (C) 2018 The Qt Company Ltd.
** Copyright (C) 2016 BlackBerry Limited. All rights reserved.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the QtBluetooth module of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:LGPL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Lesser General Public License Usage
** Alternatively, this file may be used under the terms of the GNU Lesser
** General Public License version 3 as published by the Free Software
** Foundation and appearing in the file LICENSE.LGPL3 included in the
** packaging of this file. Please review the following information to
** ensure the GNU Lesser General Public License version 3 requirements
** will be met: https://www.gnu.org/licenses/lgpl-3.0.html.
**
** GNU General Public License Usage
** Alternatively, this file may be used under the terms of the GNU
** General Public License version 2.0 or (at your option) the GNU General
** Public license version 3 or any later version approved by the KDE Free
** Qt Foundation. The licenses are as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL2 and LICENSE.GPL3
** included in the packaging of this file. Please review the following
** information to ensure the GNU General Public License requirements will
** be met: https://www.gnu.org/licenses/gpl-2.0.html and
** https://www.gnu.org/licenses/gpl-3.0.html.
**
** $QT_END_LICENSE$
**
****************************************************************************/
#include "qbluetoothsocket.h"
#if QT_CONFIG(bluez)
#include "qbluetoothsocket_bluez_p.h"
#include "qbluetoothsocket_bluezdbus_p.h"
#include "bluez/bluez5_helper_p.h"
#elif defined(QT_ANDROID_BLUETOOTH)
#include "qbluetoothsocket_android_p.h"
#elif defined(QT_WINRT_BLUETOOTH)
#include "qbluetoothsocket_winrt_p.h"
#elif defined(QT_WIN_BLUETOOTH)
#include "qbluetoothsocket_win_p.h"
#elif defined(QT_OSX_BLUETOOTH)
#include "qbluetoothsocket_osx_p.h"
#else
#include "qbluetoothsocket_dummy_p.h"
#endif
#include "qbluetoothservicediscoveryagent.h"
#include <QtCore/QLoggingCategory>
#include <QSocketNotifier>
QT_BEGIN_NAMESPACE
Q_DECLARE_LOGGING_CATEGORY(QT_BT)
/*!
\class QBluetoothSocket
\inmodule QtBluetooth
\brief The QBluetoothSocket class enables connection to a Bluetooth device
running a bluetooth server.
\since 5.2
QBluetoothSocket supports two socket types, \l {QBluetoothServiceInfo::L2capProtocol}{L2CAP} and
\l {QBluetoothServiceInfo::RfcommProtocol}{RFCOMM}.
\l {QBluetoothServiceInfo::L2capProtocol}{L2CAP} is a low level datagram-oriented Bluetooth socket.
Android does not support \l {QBluetoothServiceInfo::L2capProtocol}{L2CAP} for socket
connections.
\l {QBluetoothServiceInfo::RfcommProtocol}{RFCOMM} is a reliable, stream-oriented socket. RFCOMM
sockets emulate an RS-232 serial port.
To create a connection to a Bluetooth service, create a socket of the appropriate type and call
connectToService() passing the Bluetooth address and port number. QBluetoothSocket will emit
the connected() signal when the connection is established.
If the \l {QBluetoothServiceInfo::Protocol}{Protocol} is not supported on a platform, calling
\l connectToService() will emit a \l {QBluetoothSocket::UnsupportedProtocolError}{UnsupportedProtocolError} error.
\note QBluetoothSocket does not support synchronous read and write operations. Functions such
as \l waitForReadyRead() and \l waitForBytesWritten() are not implemented. I/O operations should be
performed using \l readyRead(), \l read() and \l write().
On iOS, this class cannot be used because the platform does not expose
an API which may permit access to QBluetoothSocket related features.
*/
/*!
\enum QBluetoothSocket::SocketState
This enum describes the state of the Bluetooth socket.
\value UnconnectedState Socket is not connected.
\value ServiceLookupState Socket is querying connection parameters.
\value ConnectingState Socket is attempting to connect to a device.
\value ConnectedState Socket is connected to a device.
\value BoundState Socket is bound to a local address and port.
\value ClosingState Socket is connected and will be closed once all pending data is
written to the socket.
\value ListeningState Socket is listening for incoming connections.
*/
/*!
\enum QBluetoothSocket::SocketError
This enum describes Bluetooth socket error types.
\value UnknownSocketError An unknown error has occurred.
\value NoSocketError No error. Used for testing.
\value HostNotFoundError Could not find the remote host.
\value ServiceNotFoundError Could not find the service UUID on remote host.
\value NetworkError Attempt to read or write from socket returned an error
\value UnsupportedProtocolError The \l {QBluetoothServiceInfo::Protocol}{Protocol} is not
supported on this platform.
\value OperationError An operation was attempted while the socket was in a state
that did not permit it.
\value RemoteHostClosedError The remote host closed the connection. This value was
introduced by Qt 5.10.
*/
/*!
\fn void QBluetoothSocket::connected()
This signal is emitted when a connection is established.
\sa QBluetoothSocket::ConnectedState, stateChanged()
*/
/*!
\fn void QBluetoothSocket::disconnected()
This signal is emitted when the socket is disconnected.
\sa QBluetoothSocket::UnconnectedState, stateChanged()
*/
/*!
\fn void QBluetoothSocket::error(QBluetoothSocket::SocketError error)
This signal is emitted when an \a error occurs.
\sa error()
*/
/*!
\fn QBluetoothSocket::stateChanged(QBluetoothSocket::SocketState state)
This signal is emitted when the socket state changes to \a state.
\sa connected(), disconnected(), state(), QBluetoothSocket::SocketState
*/
/*!
\fn void QBluetoothSocket::abort()
Aborts the current connection and resets the socket. Unlike disconnectFromService(), this
function immediately closes the socket, discarding any pending data in the write buffer.
\note On Android, aborting the socket requires asynchronous interaction with Android threads.
Therefore the associated \l disconnected() and \l stateChanged() signals are delayed
until the threads have finished the closure.
\sa disconnectFromService(), close()
*/
/*!
\fn void QBluetoothSocket::close()
Disconnects the socket's connection with the device.
\note On Android, closing the socket requires asynchronous interaction with Android threads.
Therefore the associated \l disconnected() and \l stateChanged() signals are delayed
until the threads have finished the closure.
*/
/*!
\fn void QBluetoothSocket::disconnectFromService()
Attempts to close the socket. If there is pending data waiting to be written QBluetoothSocket
will enter ClosingState and wait until all data has been written. Eventually, it will enter
UnconnectedState and emit the disconnected() signal.
\sa connectToService()
*/
/*!
\fn QString QBluetoothSocket::localName() const
Returns the name of the local device.
Although some platforms may differ the socket must generally be connected to guarantee
the return of a valid name. In particular, this is true when dealing with platforms
that support multiple local Bluetooth adapters.
*/
/*!
\fn QBluetoothAddress QBluetoothSocket::localAddress() const
Returns the address of the local device.
Although some platforms may differ the socket must generally be connected to guarantee
the return of a valid address. In particular, this is true when dealing with platforms
that support multiple local Bluetooth adapters.
*/
/*!
\fn quint16 QBluetoothSocket::localPort() const
Returns the port number of the local socket if available, otherwise returns 0.
Although some platforms may differ the socket must generally be connected to guarantee
the return of a valid port number.
On Android and \macos, this feature is not supported and returns 0.
*/
/*!
\fn QString QBluetoothSocket::peerName() const
Returns the name of the peer device.
*/
/*!
\fn QBluetoothAddress QBluetoothSocket::peerAddress() const
Returns the address of the peer device.
*/
/*!
\fn quint16 QBluetoothSocket::peerPort() const
Return the port number of the peer socket if available, otherwise returns 0.
On Android, this feature is not supported.
*/
/*!
\fn qint64 QBluetoothSocket::readData(char *data, qint64 maxSize)
\reimp
*/
/*!
\fn qint64 QBluetoothSocket::writeData(const char *data, qint64 maxSize)
\reimp
*/
static QBluetoothSocketBasePrivate *createSocketPrivate()
{
#if QT_CONFIG(bluez)
if (bluetoothdVersion() >= QVersionNumber(5, 46)) {
qCDebug(QT_BT) << "Using Bluetooth dbus socket implementation";
return new QBluetoothSocketPrivateBluezDBus();
} else {
qCDebug(QT_BT) << "Using Bluetooth raw socket implementation";
return new QBluetoothSocketPrivateBluez();
}
#elif defined(QT_ANDROID_BLUETOOTH)
return new QBluetoothSocketPrivateAndroid();
#elif defined(QT_WINRT_BLUETOOTH)
return new QBluetoothSocketPrivateWinRT();
#elif defined(QT_WIN_BLUETOOTH)
return new QBluetoothSocketPrivateWin();
#elif defined(QT_OSX_BLUETOOTH)
return new QBluetoothSocketPrivate();
#else
return new QBluetoothSocketPrivateDummy();
#endif
}
/*!
Constructs a Bluetooth socket of \a socketType type, with \a parent.
*/
QBluetoothSocket::QBluetoothSocket(QBluetoothServiceInfo::Protocol socketType, QObject *parent)
: QIODevice(parent)
{
d_ptr = createSocketPrivate();
d_ptr->q_ptr = this;
Q_D(QBluetoothSocketBase);
d->ensureNativeSocket(socketType);
setOpenMode(QIODevice::NotOpen);
}
/*!
Constructs a Bluetooth socket with \a parent.
*/
QBluetoothSocket::QBluetoothSocket(QObject *parent)
: QIODevice(parent)
{
d_ptr = createSocketPrivate();
d_ptr->q_ptr = this;
setOpenMode(QIODevice::NotOpen);
}
#if QT_CONFIG(bluez)
/*!
\internal
*/
QBluetoothSocket::QBluetoothSocket(QBluetoothSocketBasePrivate *dPrivate,
QBluetoothServiceInfo::Protocol socketType,
QObject *parent)
: QIODevice(parent)
{
d_ptr = dPrivate;
d_ptr->q_ptr = this;
Q_D(QBluetoothSocketBase);
d->ensureNativeSocket(socketType);
setOpenMode(QIODevice::NotOpen);
}
#endif
/*!
Destroys the Bluetooth socket.
*/
QBluetoothSocket::~QBluetoothSocket()
{
delete d_ptr;
d_ptr = nullptr;
}
/*!
\reimp
*/
bool QBluetoothSocket::isSequential() const
{
return true;
}
/*!
Returns the number of incoming bytes that are waiting to be read.
\sa bytesToWrite(), read()
*/
qint64 QBluetoothSocket::bytesAvailable() const
{
Q_D(const QBluetoothSocketBase);
return QIODevice::bytesAvailable() + d->bytesAvailable();
}
/*!
Returns the number of bytes that are waiting to be written. The bytes are written when control
goes back to the event loop.
*/
qint64 QBluetoothSocket::bytesToWrite() const
{
Q_D(const QBluetoothSocketBase);
return d->bytesToWrite();
}
/*!
Attempts to connect to the service described by \a service.
The socket is opened in the given \a openMode. The \l socketType() is ignored
if \a service specifies a differing \l QBluetoothServiceInfo::socketProtocol().
The socket first enters ConnectingState and attempts to connect to the device providing
\a service. If a connection is established, QBluetoothSocket enters ConnectedState and
emits connected().
At any point, the socket can emit error() to signal that an error occurred.
Note that most platforms require a pairing prior to connecting to the remote device. Otherwise
the connection process may fail.
On Android, only RFCOMM connections are possible. This function ignores any socket protocol indicator
and assumes RFCOMM.
\sa state(), disconnectFromService()
*/
void QBluetoothSocket::connectToService(const QBluetoothServiceInfo &service, OpenMode openMode)
{
Q_D(QBluetoothSocketBase);
d->connectToService(service, openMode);
}
/*!
\fn void QBluetoothSocket::connectToService(const QBluetoothAddress &address, QBluetoothUuid::ServiceClassUuid uuid, OpenMode mode = ReadWrite)
\internal
Exists to avoid QTBUG-65831.
*/
/*!
Attempts to make a connection to the service identified by \a uuid on the device with address
\a address.
The socket is opened in the given \a openMode.
For BlueZ, the socket first enters the \l ServiceLookupState and queries the connection parameters for
\a uuid. If the service parameters are successfully retrieved the socket enters
ConnectingState, and attempts to connect to \a address. If a connection is established,
QBluetoothSocket enters \l ConnectedState and emits connected().
On Android, the service connection can directly be established
using the UUID of the remote service. Therefore the platform does not require
the \l ServiceLookupState and \l socketType() is always set to
\l QBluetoothServiceInfo::RfcommProtocol.
At any point, the socket can emit error() to signal that an error occurred.
Note that most platforms require a pairing prior to connecting to the remote device. Otherwise
the connection process may fail.
\sa state(), disconnectFromService()
*/
void QBluetoothSocket::connectToService(const QBluetoothAddress &address, const QBluetoothUuid &uuid, OpenMode openMode)
{
Q_D(QBluetoothSocketBase);
d->connectToService(address, uuid, openMode);
}
/*!
Attempts to make a connection with \a address on the given \a port.
The socket is opened in the given \a openMode.
The socket first enters ConnectingState, and attempts to connect to \a address. If a
connection is established, QBluetoothSocket enters ConnectedState and emits connected().
At any point, the socket can emit error() to signal that an error occurred.
On Android and BlueZ (version 5.46 or above), a connection to a service can not be established using a port.
Calling this function will emit a \l {QBluetoothSocket::ServiceNotFoundError}{ServiceNotFoundError}.
Note that most platforms require a pairing prior to connecting to the remote device. Otherwise
the connection process may fail.
\sa state(), disconnectFromService()
*/
void QBluetoothSocket::connectToService(const QBluetoothAddress &address, quint16 port, OpenMode openMode)
{
Q_D(QBluetoothSocketBase);
d->connectToService(address, port, openMode);
}
/*!
Returns the socket type. The socket automatically adjusts to the protocol
offered by the remote service.
Android only support \l{QBluetoothServiceInfo::RfcommProtocol}{RFCOMM}
based sockets.
*/
QBluetoothServiceInfo::Protocol QBluetoothSocket::socketType() const
{
Q_D(const QBluetoothSocketBase);
return d->socketType;
}
/*!
Returns the current state of the socket.
*/
QBluetoothSocket::SocketState QBluetoothSocket::state() const
{
Q_D(const QBluetoothSocketBase);
return d->state;
}
/*!
Returns the last error.
*/
QBluetoothSocket::SocketError QBluetoothSocket::error() const
{
Q_D(const QBluetoothSocketBase);
return d->socketError;
}
/*!
Returns a user displayable text string for the error.
*/
QString QBluetoothSocket::errorString() const
{
Q_D(const QBluetoothSocketBase);
return d->errorString;
}
/*!
Sets the preferred security parameter for the connection attempt to
\a flags. This value is incorporated when calling \l connectToService().
Therefore it is required to reconnect to change this parameter for an
existing connection.
On Bluez this property is set to QBluetooth::Authorization by default.
On \macos, this value is ignored as the platform does not permit access
to the security parameter of the socket. By default the platform prefers
secure/encrypted connections though and therefore this function always
returns \l QBluetooth::Secure.
Android only supports two levels of security (secure and non-secure). If this flag is set to
\l QBluetooth::NoSecurity the socket object will not employ any authentication or encryption.
Any other security flag combination will trigger a secure Bluetooth connection.
This flag is set to \l QBluetooth::Secure by default.
\note A secure connection requires a pairing between the two devices. On
some platforms, the pairing is automatically initiated during the establishment
of the connection. Other platforms require the application to manually trigger
the pairing before attempting to connect.
\sa preferredSecurityFlags()
\since 5.6
*/
void QBluetoothSocket::setPreferredSecurityFlags(QBluetooth::SecurityFlags flags)
{
#ifdef QT_OSX_BLUETOOTH
return; // not supported on macOS.
#endif
Q_D(QBluetoothSocketBase);
if (d->secFlags != flags)
d->secFlags = flags;
}
/*!
Returns the security parameters used for the initial connection
attempt.
The security parameters may be renegotiated between the two parties
during or after the connection has been established. If such a change happens
it is not reflected in the value of this flag.
On \macos, this flag is always set to \l QBluetooth::Secure.
\sa setPreferredSecurityFlags()
\since 5.6
*/
QBluetooth::SecurityFlags QBluetoothSocket::preferredSecurityFlags() const
{
#if QT_OSX_BLUETOOTH
// not supported on macOS - platform always uses encryption
return QBluetooth::Secure;
#else
Q_D(const QBluetoothSocketBase);
return d->secFlags;
#endif // QT_OSX_BLUETOOTH
}
/*!
Sets the socket state to \a state.
*/
void QBluetoothSocket::setSocketState(QBluetoothSocket::SocketState state)
{
Q_D(QBluetoothSocketBase);
const SocketState old = d->state;
if (state == old)
return;
d->state = state;
if(old != d->state)
emit stateChanged(state);
if (state == QBluetoothSocket::ConnectedState) {
emit connected();
} else if ((old == QBluetoothSocket::ConnectedState
|| old == QBluetoothSocket::ClosingState)
&& state == QBluetoothSocket::UnconnectedState) {
emit disconnected();
}
if(state == ListeningState){
#ifdef QT_OSX_BLUETOOTH
qCWarning(QT_BT) << "listening socket is not supported by IOBluetooth";
#endif
// TODO: look at this, is this really correct?
// if we're a listening socket we can't handle connects?
if (d->readNotifier) {
d->readNotifier->setEnabled(false);
}
}
}
/*!
Returns true if you can read at least one line from the device
*/
bool QBluetoothSocket::canReadLine() const
{
Q_D(const QBluetoothSocketBase);
return d->canReadLine();
}
/*!
Sets the type of error that last occurred to \a error_.
*/
void QBluetoothSocket::setSocketError(QBluetoothSocket::SocketError error_)
{
Q_D(QBluetoothSocketBase);
d->socketError = error_;
emit error(error_);
}
/*!
Start device discovery for \a service and open the socket with \a openMode. If the socket
is created with a service uuid device address, use service discovery to find the
port number to connect to.
*/
void QBluetoothSocket::doDeviceDiscovery(const QBluetoothServiceInfo &service, OpenMode openMode)
{
Q_D(QBluetoothSocketBase);
setSocketState(QBluetoothSocket::ServiceLookupState);
qCDebug(QT_BT) << "Starting Bluetooth service discovery";
if(d->discoveryAgent) {
d->discoveryAgent->stop();
delete d->discoveryAgent;
}
d->discoveryAgent = new QBluetoothServiceDiscoveryAgent(this);
d->discoveryAgent->setRemoteAddress(service.device().address());
//qDebug() << "Got agent";
connect(d->discoveryAgent, &QBluetoothServiceDiscoveryAgent::serviceDiscovered,
this, &QBluetoothSocket::serviceDiscovered);
connect(d->discoveryAgent, &QBluetoothServiceDiscoveryAgent::finished,
this, &QBluetoothSocket::discoveryFinished);
d->openMode = openMode;
QList<QBluetoothUuid> filterUuids = service.serviceClassUuids();
if(!service.serviceUuid().isNull())
filterUuids.append(service.serviceUuid());
if (!filterUuids.isEmpty())
d->discoveryAgent->setUuidFilter(filterUuids);
// we have to ID the service somehow
Q_ASSERT(!d->discoveryAgent->uuidFilter().isEmpty());
qCDebug(QT_BT) << "UUID filter" << d->discoveryAgent->uuidFilter();
d->discoveryAgent->start(QBluetoothServiceDiscoveryAgent::FullDiscovery);
}
void QBluetoothSocket::serviceDiscovered(const QBluetoothServiceInfo &service)
{
Q_D(QBluetoothSocketBase);
qCDebug(QT_BT) << "FOUND SERVICE!" << service;
if (service.protocolServiceMultiplexer() > 0 || service.serverChannel() > 0) {
connectToService(service, d->openMode);
d->discoveryAgent->deleteLater();
d->discoveryAgent = nullptr;
#ifdef QT_WINRT_BLUETOOTH
} else if (!service.attribute(0xBEEF).isNull()
&& !service.attribute(0xBEF0).isNull()) {
connectToService(service, d->openMode);
d->discoveryAgent->deleteLater();
d->discoveryAgent = nullptr;
#endif
} else {
qCDebug(QT_BT) << "Could not find port/psm for potential remote service";
}
}
void QBluetoothSocket::discoveryFinished()
{
qCDebug(QT_BT) << "Socket discovery finished";
Q_D(QBluetoothSocketBase);
if (d->discoveryAgent){
qCDebug(QT_BT) << "Didn't find any";
d->errorString = tr("Service cannot be found");
setSocketError(ServiceNotFoundError);
setSocketState(QBluetoothSocket::UnconnectedState);
d->discoveryAgent->deleteLater();
d->discoveryAgent = nullptr;
}
}
void QBluetoothSocket::abort()
{
if (state() == UnconnectedState)
return;
Q_D(QBluetoothSocketBase);
setOpenMode(QIODevice::NotOpen);
if (state() == ServiceLookupState && d->discoveryAgent) {
d->discoveryAgent->disconnect();
d->discoveryAgent->stop();
d->discoveryAgent = nullptr;
}
setSocketState(ClosingState);
d->abort();
}
void QBluetoothSocket::disconnectFromService()
{
close();
}
QString QBluetoothSocket::localName() const
{
Q_D(const QBluetoothSocketBase);
return d->localName();
}
QBluetoothAddress QBluetoothSocket::localAddress() const
{
Q_D(const QBluetoothSocketBase);
return d->localAddress();
}
quint16 QBluetoothSocket::localPort() const
{
Q_D(const QBluetoothSocketBase);
return d->localPort();
}
QString QBluetoothSocket::peerName() const
{
Q_D(const QBluetoothSocketBase);
return d->peerName();
}
QBluetoothAddress QBluetoothSocket::peerAddress() const
{
Q_D(const QBluetoothSocketBase);
return d->peerAddress();
}
quint16 QBluetoothSocket::peerPort() const
{
Q_D(const QBluetoothSocketBase);
return d->peerPort();
}
qint64 QBluetoothSocket::writeData(const char *data, qint64 maxSize)
{
Q_D(QBluetoothSocketBase);
if (!data || maxSize <= 0) {
d_ptr->errorString = tr("Invalid data/data size");
setSocketError(QBluetoothSocket::OperationError);
return -1;
}
return d->writeData(data, maxSize);
}
qint64 QBluetoothSocket::readData(char *data, qint64 maxSize)
{
Q_D(QBluetoothSocketBase);
return d->readData(data, maxSize);
}
void QBluetoothSocket::close()
{
if (state() == UnconnectedState)
return;
Q_D(QBluetoothSocketBase);
setOpenMode(QIODevice::NotOpen);
if (state() == ServiceLookupState && d->discoveryAgent) {
d->discoveryAgent->disconnect();
d->discoveryAgent->stop();
d->discoveryAgent = nullptr;
}
setSocketState(ClosingState);
d->close();
}
/*!
Set the socket to use \a socketDescriptor with a type of \a socketType,
which is in state, \a socketState, and mode, \a openMode.
Returns true on success
*/
bool QBluetoothSocket::setSocketDescriptor(int socketDescriptor, QBluetoothServiceInfo::Protocol socketType,
SocketState socketState, OpenMode openMode)
{
Q_D(QBluetoothSocketBase);
return d->setSocketDescriptor(socketDescriptor, socketType, socketState, openMode);
}
/*!
Returns the platform-specific socket descriptor, if available.
This function returns -1 if the descriptor is not available or an error has occurred.
*/
int QBluetoothSocket::socketDescriptor() const
{
Q_D(const QBluetoothSocketBase);
return d->socket;
}
#ifndef QT_NO_DEBUG_STREAM
QDebug operator<<(QDebug debug, QBluetoothSocket::SocketError error)
{
switch (error) {
case QBluetoothSocket::UnknownSocketError:
debug << "QBluetoothSocket::UnknownSocketError";
break;
case QBluetoothSocket::HostNotFoundError:
debug << "QBluetoothSocket::HostNotFoundError";
break;
case QBluetoothSocket::RemoteHostClosedError:
debug << "QBluetoothSocket::RemoteHostClosedError";
break;
case QBluetoothSocket::ServiceNotFoundError:
debug << "QBluetoothSocket::ServiceNotFoundError";
break;
case QBluetoothSocket::NetworkError:
debug << "QBluetoothSocket::NetworkError";
break;
case QBluetoothSocket::UnsupportedProtocolError:
debug << "QBluetoothSocket::UnsupportedProtocolError";
break;
default:
debug << "QBluetoothSocket::SocketError(" << (int)error << ")";
}
return debug;
}
QDebug operator<<(QDebug debug, QBluetoothSocket::SocketState state)
{
switch (state) {
case QBluetoothSocket::UnconnectedState:
debug << "QBluetoothSocket::UnconnectedState";
break;
case QBluetoothSocket::ConnectingState:
debug << "QBluetoothSocket::ConnectingState";
break;
case QBluetoothSocket::ConnectedState:
debug << "QBluetoothSocket::ConnectedState";
break;
case QBluetoothSocket::BoundState:
debug << "QBluetoothSocket::BoundState";
break;
case QBluetoothSocket::ClosingState:
debug << "QBluetoothSocket::ClosingState";
break;
case QBluetoothSocket::ListeningState:
debug << "QBluetoothSocket::ListeningState";
break;
case QBluetoothSocket::ServiceLookupState:
debug << "QBluetoothSocket::ServiceLookupState";
break;
default:
debug << "QBluetoothSocket::SocketState(" << (int)state << ")";
}
return debug;
}
#endif
QT_END_NAMESPACE
#include "moc_qbluetoothsocket.cpp"