| /**************************************************************************** |
| ** |
| ** Copyright (C) 2016 The Qt Company Ltd and/or its subsidiary(-ies). |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the Qt Mobility Components. |
| ** |
| ** $QT_BEGIN_LICENSE:GPL-EXCEPT$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** GNU General Public License Usage |
| ** Alternatively, this file may be used under the terms of the GNU |
| ** General Public License version 3 as published by the Free Software |
| ** Foundation with exceptions as appearing in the file LICENSE.GPL3-EXCEPT |
| ** included in the packaging of this file. Please review the following |
| ** information to ensure the GNU General Public License requirements will |
| ** be met: https://www.gnu.org/licenses/gpl-3.0.html. |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| //TESTED_COMPONENT=src/multimedia |
| |
| testcase = { |
| |
| /* Notes |
| Ensure radio reception is available in testing area |
| Most tier 1 platforms require a radio module |
| A device specific headset is required to be connected to device for radio testing |
| */ |
| |
| initTestCase: function() |
| { |
| }, |
| |
| play_a_radio_transmission: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Play Radio Transmission"; |
| testBinary = "radio"; |
| testSource ="qt5/qtmultimedia/examples/radio" |
| testGoal = "Verify that radio stations can be played."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Device must have a suppported radio module."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | | If not first time running application on image, verify that you are presented with a list of previously scanned radio stations | |
| | Select a radio station from the list | Verify that the station is properly selected | |
| | Select the power icon next to the station name | Verify that audio from the radio station is now heard through the headphones | |
| | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones | |
| | Exit the radio application | Verify that the radio application closes cleanly | |
| ")); |
| }, |
| |
| change_a_radio_station: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Radio: Change radio station"; |
| testBinary = "radio"; |
| testSource ="qt5/qtmultimedia/examples/radio" |
| testGoal = "Verify that radio station can be changed from station playlist."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Select a radio station from the list | Verify that the station is heard through the headphones | |
| | If in the visualization view, select the down icon to return to the station selection view | Verify that you are presented with the list of stations | |
| | Select a different station | Verify that you are now listening to a different radio station | |
| | Deselect the power icon next to the station name | Verify that audio from the radio station is no longer heard through the headphones | |
| | Exit the radio application | Verify that the radio application closes cleanly | |
| ")); |
| }, |
| |
| manually_tune_radio_station: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Manually tune radio station"; |
| testBinary = "radio"; |
| testSource ="qt5/qtmultimedia/examples/radio" |
| testGoal = "Verify that user can manually change radio station."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Select a radio station from the list | Verify that the station is heard through the headphones | |
| | Select the up icon to be presented to the visualization view | | |
| | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial | |
| | Note the current selected frequency | | |
| | Select the dot indicator on the frequency dial, and move finger to right | Verify that the frequency on the indicator is now rising and that the audio has gone off the previous station | |
| | Keep moving selector until a radio station is heard | Verify that the frequency of the selected station is higher than the originally selected station | |
| | | Verify that the station is playing properly | |
| | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | |
| | Exit the radio application | Verify that the radio application closes cleanly | |
| ")); |
| }, |
| |
| scan_up_and_down: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Scan up and down the frequency"; |
| testBinary = "radio"; |
| testSource ="qt5/qtmultimedia/examples/radio" |
| testGoal = "Verify that radio can scan up and down the FM frequency."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Select a radio station from the list | Verify that the station is heard through the headphones | |
| | Select the up icon to be presented to the visualization view | | |
| | Select the Plus icon on the menu bar | Verify that you are presented with the frequency dial | |
| | Note the current selected frequency | | |
| | Select the Scan Up Frequency control | Verify that application has located a new station and that the frequency displayed is of the new station | |
| | | Verify that the station is playing properly | |
| | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | |
| | Select the Scan Down Frequency control | Verify that application has located the original station and that the frequency displayed is of the original station | |
| | | Verify that the station is playing properly | |
| | Select to save the selected radio station frequency | Verify that the station is saved in the radio station playlist | |
| | Exit the radio application | Verify that the radio application closes cleanly | |
| ")); |
| }, |
| |
| scan_for_multiple_radio_stations: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Radio: Scan for multiple radio station"; |
| testBinary = "radio"; |
| testSource ="qt5/qtmultimedia/examples/radio" |
| testGoal = "Verify that radio can scan for multiple stations at once."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | On the menu, select Find new station | In the Radio Dialog Scanning view, observe the number of stations found | |
| | Exit the radio application | Verify that the radio application closes cleanly | |
| ")); |
| }, |
| |
| save_radio_station_list: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Radio: Save station playlist"; |
| testBinary = "radio"; |
| testSource ="qt5/qtmultimedia/examples/radio" |
| testGoal = "Verify that radio can save station playlist."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Select to scan for multiple stations | Verify that multiple stations have been found | |
| | Select to save station playlist | | |
| | Close application | Verify that the application closes | |
| | Reopen " + testBinary + " | Verify that the app launches normally | |
| | Go to station playlist | Verify that the stations from the previous search are listed | |
| | Select various stations from playlist | Verify that radio station play properly | |
| | Close application | Verify that radio application closes properly | |
| ")); |
| }, |
| |
| |
| radio_interrupted_by_system_notification: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Radio interrupted by System Notification"; |
| testBinary = "radio"; |
| testSource ="$QTDIR/qtmultimediakit/examples/Radio" |
| testGoal = "Verify that radio can recover audio playback from various system notifications."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Locate a strong radio station signal by scanning up/down | | |
| | While on a strong and audible radio signal, evoke a system notification on device (eg: alarm notification) | Verify that the radio has muted, and after the system notification has been delivered, the radio reverts to outputting the audio signal back through the headphones | |
| | While on a strong and audible radio signal, call the device | Verify that the radio has been muted, and stays muted during the duration of the call, and resumes once the call has ended | |
| | Close application | Verify that radio application closes properly | |
| ")); |
| }, |
| |
| radio_volume_control: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Radio Volume Control"; |
| testBinary = "radio"; |
| testGoal = "Verify that the radio volume can be controlled via volume controls."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Locate a strong radio station signal by scanning up or down the frequency | | |
| | While on a strong and audible radio signal, move volume slider to the right | Verify that the audio volume of the radio station is amplified | |
| | Move volume slider to the left | Verify that the audio volume is lowered | |
| | Move the volume slider all the way to the left | Verify that the sound is now completely muted | |
| | Return the volume to a value above 50% and click the Mute/unmute command | Verify that the audio changes from being muted to unmuted and back | |
| ")); |
| }, |
| |
| display_radio_metadata: function() |
| { |
| // Test meta data |
| testTitle = "Multimedia - Display Radio Meta data"; |
| testBinary = "radio"; |
| testGoal = "Verify that the radio API can display properly formatted meta data."; |
| testPreconditions = "1. Radio reception should be available in the test area.<br>2. Wired headphones act as an antenna to the device and must be connected."; |
| testGroups = "BAT, 1.2"; |
| |
| // Test steps |
| prompt(twiki("---+++ " + testTitle + "<br><br> |
| *Goal:* " + testGoal + "<br> |
| *Pre-Requisites:* " + testPreconditions + "<br> |
| *Tested Binary:* " + testBinary + "<br> |
| |
| | *Step* | *Verification* | |
| | Launch " + testBinary + " | App launches normally | |
| | Locate a strong radio station signal by scanning up or down the frequency | Verify that the Frequency field is populated with the correct frequency for the given radio station | |
| | | Verify that the Volume field is displaying the proper volume % | |
| | Click on the Mute/Unmute command | Verify that Muted field changes from 'false' to 'true' and back | |
| | | If applicable, confirm that the Station Name field is properly displayed | |
| | | If applicable, confirm that the Station Id field is properly displayed | |
| | | If applicable, confirm that the Program Type field is properly displayed | |
| | | If applicable, confirm that the Radio Text field is properly displayed | |
| ")); |
| }, |
| } |
