| <?xml version="1.0" encoding="utf-8"?> |
| <!DOCTYPE TS> |
| <TS version="2.1" language="pl_PL"> |
| <context> |
| <name>QQmlWebSocket</name> |
| <message> |
| <source>Messages can only be sent when the socket is open.</source> |
| <translation>Komunikaty mogą być wysyłane jedynie gdy gniazdo jest otwarte.</translation> |
| </message> |
| <message> |
| <source>QQmlWebSocket is not ready.</source> |
| <translation>QQmlWebSocket nie jest gotowy.</translation> |
| </message> |
| </context> |
| <context> |
| <name>QQmlWebSocketServer</name> |
| <message> |
| <source>QQmlWebSocketServer is not ready.</source> |
| <translation>QQmlWebSocketServer nie jest gotowy.</translation> |
| </message> |
| </context> |
| <context> |
| <name>QWebSocket</name> |
| <message> |
| <source>Connection closed</source> |
| <translation>Zamknięto połączenie</translation> |
| </message> |
| <message> |
| <source>Invalid URL.</source> |
| <translation>Niepoprawny URL.</translation> |
| </message> |
| <message> |
| <source>Invalid resource name.</source> |
| <translation>Niepoprawna nazwa zasobu.</translation> |
| </message> |
| <message> |
| <source>SSL Sockets are not supported on this platform.</source> |
| <translation>Ta platforma nie obsługuje gniazd SSL.</translation> |
| </message> |
| <message> |
| <source>Out of memory.</source> |
| <translation>Brak pamięci.</translation> |
| </message> |
| <message> |
| <source>Unsupported WebSocket scheme: %1</source> |
| <translation>Nieobsługiwany schemat WebSocket: %1</translation> |
| </message> |
| <message> |
| <source>Error writing bytes to socket: %1.</source> |
| <translation>Błąd zapisu do gniazda: %1.</translation> |
| </message> |
| <message> |
| <source>Bytes written %1 != %2.</source> |
| <translation>Liczba zapisanych danych %1 != %2.</translation> |
| </message> |
| <message> |
| <source>Invalid statusline in response: %1.</source> |
| <translation>Niepoprawna linia statusu w odpowiedzi: %1.</translation> |
| </message> |
| <message> |
| <source>QWebSocketPrivate::processHandshake: Connection closed while reading header.</source> |
| <translation>QWebSocketPrivate::processHandshake: Połączenie zamknięte podczas odczytu nagłówka.</translation> |
| </message> |
| <message> |
| <source>Accept-Key received from server %1 does not match the client key %2.</source> |
| <translation>Accept-Key otrzymany z serwera %1 nie pasuje do klucza klienta %2.</translation> |
| </message> |
| <message> |
| <source>QWebSocketPrivate::processHandshake: Invalid statusline in response: %1.</source> |
| <translation>QWebSocketPrivate::processHandshake: Niepoprawna linia statusu w odpowiedzi: %1.</translation> |
| </message> |
| <message> |
| <source>Handshake: Server requests a version that we don't support: %1.</source> |
| <translation>Handshake: Serwer zażądał nieobsługiwanej wersji: %1.</translation> |
| </message> |
| <message> |
| <source>QWebSocketPrivate::processHandshake: Unknown error condition encountered. Aborting connection.</source> |
| <translation>QWebSocketPrivate::processHandshake: Nieznany błąd. Przerwano połączenie.</translation> |
| </message> |
| <message> |
| <source>QWebSocketPrivate::processHandshake: Unhandled http status code: %1 (%2).</source> |
| <translation>QWebSocketPrivate::processHandshake: Nieobsługiwany kod statusu http: %1 (%2).</translation> |
| </message> |
| <message> |
| <source>The resource name contains newlines. Possible attack detected.</source> |
| <translation>Nazwa zasobu zawiera znaki nowych linii. Wykryto możliwy atak.</translation> |
| </message> |
| <message> |
| <source>The hostname contains newlines. Possible attack detected.</source> |
| <translation>Nazwa hosta zawiera znaki nowych linii. Wykryto możliwy atak.</translation> |
| </message> |
| <message> |
| <source>The origin contains newlines. Possible attack detected.</source> |
| <translation>Źródło zawiera znaki nowych linii. Wykryto możliwy atak.</translation> |
| </message> |
| <message> |
| <source>The extensions attribute contains newlines. Possible attack detected.</source> |
| <translation>Atrybut rozszerzeń zawiera znaki nowych linii. Wykryto możliwy atak.</translation> |
| </message> |
| <message> |
| <source>The protocols attribute contains newlines. Possible attack detected.</source> |
| <translation>Atrybut protokołów zawiera znaki nowych linii. Wykryto możliwy atak.</translation> |
| </message> |
| </context> |
| <context> |
| <name>QWebSocketDataProcessor</name> |
| <message> |
| <source>Received Continuation frame, while there is nothing to continue.</source> |
| <translation>Otrzymano znak kontynuacji, jednak wcześniej nie otrzymano żadnych innych danych.</translation> |
| </message> |
| <message> |
| <source>All data frames after the initial data frame must have opcode 0 (continuation).</source> |
| <translation type="unfinished"></translation> |
| </message> |
| <message> |
| <source>Received message is too big.</source> |
| <translation>Otrzymano zbyt obszerny komunikat.</translation> |
| </message> |
| <message> |
| <source>Invalid UTF-8 code encountered.</source> |
| <translation>Otrzymano niepoprawny znak UTF-8.</translation> |
| </message> |
| <message> |
| <source>Payload of close frame is too small.</source> |
| <translation type="unfinished"></translation> |
| </message> |
| <message> |
| <source>Invalid close code %1 detected.</source> |
| <translation>Wykryto niepoprawny kod zamykający %1.</translation> |
| </message> |
| <message> |
| <source>Invalid opcode detected: %1</source> |
| <translation>Wykryto niepoprawny opcode: %1</translation> |
| </message> |
| </context> |
| <context> |
| <name>QWebSocketFrame</name> |
| <message> |
| <source>Timeout when reading data from socket.</source> |
| <translation>Przekroczony limit czasu oczekiwania na dane z gniazda.</translation> |
| </message> |
| <message> |
| <source>Error occurred while reading from the network: %1</source> |
| <translation>Błąd odczytu z sieci: %1</translation> |
| </message> |
| <message> |
| <source>Lengths smaller than 126 must be expressed as one byte.</source> |
| <translation>Długości mniejsze od 126 muszą być wyrażone za pomocą jednego bajta.</translation> |
| </message> |
| <message> |
| <source>Something went wrong during reading from the network.</source> |
| <translation>Błąd odczytu z sieci.</translation> |
| </message> |
| <message> |
| <source>Highest bit of payload length is not 0.</source> |
| <translation type="unfinished"></translation> |
| </message> |
| <message> |
| <source>Lengths smaller than 65536 (2^16) must be expressed as 2 bytes.</source> |
| <translation>Długości mniejsze od 65536 (2^16) muszą być wyrażone za pomocą dwóch bajtów.</translation> |
| </message> |
| <message> |
| <source>Error while reading from the network: %1.</source> |
| <translation>Błąd odczytu z sieci: %1.</translation> |
| </message> |
| <message> |
| <source>Maximum framesize exceeded.</source> |
| <translation type="unfinished"></translation> |
| </message> |
| <message> |
| <source>Some serious error occurred while reading from the network.</source> |
| <translation>Poważny błąd odczytu z sieci.</translation> |
| </message> |
| <message> |
| <source>Rsv field is non-zero</source> |
| <translation>Pole rsv jest niezerowe</translation> |
| </message> |
| <message> |
| <source>Used reserved opcode</source> |
| <translation>Użyto zarezerwowanego opcode</translation> |
| </message> |
| <message> |
| <source>Control frame is larger than 125 bytes</source> |
| <translation type="unfinished"></translation> |
| </message> |
| <message> |
| <source>Control frames cannot be fragmented</source> |
| <translation type="unfinished"></translation> |
| </message> |
| </context> |
| <context> |
| <name>QWebSocketHandshakeResponse</name> |
| <message> |
| <source>Access forbidden.</source> |
| <translation>Dostęp zabroniony.</translation> |
| </message> |
| <message> |
| <source>Unsupported version requested.</source> |
| <translation>Zażądano nieobsługiwanej wersji.</translation> |
| </message> |
| <message> |
| <source>One of the headers contains a newline. Possible attack detected.</source> |
| <translation>Jeden z nagłówków zawiera znak nowej linii. Wykryto możliwy atak.</translation> |
| </message> |
| <message> |
| <source>Bad handshake request received.</source> |
| <translation type="unfinished"></translation> |
| </message> |
| </context> |
| <context> |
| <name>QWebSocketServer</name> |
| <message> |
| <source>Server closed.</source> |
| <translation type="unfinished"></translation> |
| </message> |
| <message> |
| <source>Too many pending connections.</source> |
| <translation>Zbyt dużo oczekujących połączeń.</translation> |
| </message> |
| <message> |
| <source>Upgrade to WebSocket failed.</source> |
| <translation>Błąd upgrade'u do WebSocket.</translation> |
| </message> |
| <message> |
| <source>Invalid response received.</source> |
| <translation>Otrzymano niepoprawną odpowiedź.</translation> |
| </message> |
| </context> |
| </TS> |