| # |
| # qmake configuration for the Jetson TK1 boards running Linux For Tegra |
| # |
| # Note that this environment has been tested with X11 only. |
| # |
| # A typical configure line might look like: |
| # configure \ |
| # -device linux-jetson-tk1-g++ \ |
| # -device-option CROSS_COMPILE=/opt/nvidia/toolchains/tegra-4.8.1-nv/usr/bin/arm-cortex_a15-linux-gnueabi/arm-cortex_a15-linux-gnueabi- \ |
| # -sysroot /opt/nvidia/l4t/targetfs |
| |
| include(../common/linux_device_pre.conf) |
| |
| QMAKE_INCDIR_POST += \ |
| $$[QT_SYSROOT]/usr/include \ |
| $$[QT_SYSROOT]/usr/include/arm-linux-gnueabihf |
| |
| QMAKE_LIBDIR_POST += \ |
| $$[QT_SYSROOT]/usr/lib \ |
| $$[QT_SYSROOT]/lib/arm-linux-gnueabihf \ |
| $$[QT_SYSROOT]/usr/lib/arm-linux-gnueabihf |
| |
| QMAKE_RPATHLINKDIR_POST += \ |
| $$[QT_SYSROOT]/usr/lib \ |
| $$[QT_SYSROOT]/usr/lib/arm-linux-gnueabihf \ |
| $$[QT_SYSROOT]/lib/arm-linux-gnueabihf |
| |
| DISTRO_OPTS += hard-float |
| COMPILER_FLAGS += -mtune=cortex-a15 -march=armv7-a -mfpu=neon-vfpv4 |
| |
| EGLFS_DEVICE_INTEGRATION = eglfs_kms_egldevice |
| |
| include(../common/linux_arm_device_post.conf) |
| load(qt_config) |
