| /**************************************************************************** |
| ** |
| ** Copyright (C) 2016 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the documentation of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:BSD$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** BSD License Usage |
| ** Alternatively, you may use this file under the terms of the BSD license |
| ** as follows: |
| ** |
| ** "Redistribution and use in source and binary forms, with or without |
| ** modification, are permitted provided that the following conditions are |
| ** met: |
| ** * Redistributions of source code must retain the above copyright |
| ** notice, this list of conditions and the following disclaimer. |
| ** * Redistributions in binary form must reproduce the above copyright |
| ** notice, this list of conditions and the following disclaimer in |
| ** the documentation and/or other materials provided with the |
| ** distribution. |
| ** * Neither the name of The Qt Company Ltd nor the names of its |
| ** contributors may be used to endorse or promote products derived |
| ** from this software without specific prior written permission. |
| ** |
| ** |
| ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| #! [0] |
| make all |
| #! [0] |
| |
| |
| #! [1] |
| CONFIG += qt debug |
| #! [1] |
| |
| |
| #! [2] |
| QT += network xml |
| #! [2] |
| |
| |
| #! [3] |
| QT = network xml # This will omit the core and gui modules. |
| #! [3] |
| |
| |
| #! [4] |
| QT -= gui # Only the core module is used. |
| #! [4] |
| |
| |
| #! [5] |
| CONFIG += link_pkgconfig |
| PKGCONFIG += ogg dbus-1 |
| #! [5] |
| |
| |
| #! [6] |
| LIBS += -L/usr/local/lib -lmath |
| #! [6] |
| |
| |
| #! [7] |
| INCLUDEPATH = c:/msdev/include d:/stl/include |
| #! [7] |
| |
| |
| #! [8] |
| qmake [mode] [options] files |
| #! [8] |
| |
| |
| #! [9] |
| qmake -makefile [options] files |
| #! [9] |
| |
| |
| #! [10] |
| qmake -makefile -o Makefile "CONFIG+=test" test.pro |
| #! [10] |
| |
| |
| #! [11] |
| qmake "CONFIG+=test" test.pro |
| #! [11] |
| |
| |
| #! [12] |
| qmake -project [options] files |
| #! [12] |
| |
| |
| #! [13] |
| qmake -spec macx-g++ |
| #! [13] |
| |
| |
| #! [14] |
| LIBS += -F/path/to/framework/directory/ |
| #! [14] |
| |
| |
| #! [15] |
| LIBS += -framework TheFramework |
| #! [15] |
| |
| |
| #! [16] |
| TEMPLATE = lib |
| CONFIG += lib_bundle |
| #! [16] |
| |
| |
| #! [17] |
| FRAMEWORK_HEADERS.version = Versions |
| FRAMEWORK_HEADERS.files = path/to/header_one.h path/to/header_two.h |
| FRAMEWORK_HEADERS.path = Headers |
| QMAKE_BUNDLE_DATA += FRAMEWORK_HEADERS |
| #! [17] |
| |
| |
| #! [19] |
| qmake -spec macx-xcode project.pro |
| #! [19] |
| |
| |
| #! [20] |
| qmake -tp vc |
| #! [20] |
| |
| |
| #! [21] |
| qmake -tp vc -r |
| #! [21] |
| |
| |
| #! [22] |
| CONFIG -= embed_manifest_exe |
| #! [22] |
| |
| |
| #! [23] |
| CONFIG -= embed_manifest_dll |
| #! [23] |
| |
| |
| #! [24] |
| make all |
| #! [24] |
| |
| |
| #! [25] |
| build_pass:CONFIG(debug, debug|release) { |
| unix: TARGET = $$join(TARGET,,,_debug) |
| else: TARGET = $$join(TARGET,,,d) |
| } |
| #! [25] |
| |
| |
| #! [26] |
| CONFIG += console newstuff |
| ... |
| newstuff { |
| SOURCES += new.cpp |
| HEADERS += new.h |
| } |
| #! [26] |
| |
| |
| #! [27] |
| DEFINES += USE_MY_STUFF |
| #! [27] |
| |
| |
| #! [30] |
| DESTDIR = ../../lib |
| #! [30] |
| |
| |
| #! [31] |
| DISTFILES += ../program.txt |
| #! [31] |
| |
| |
| #! [32] |
| FORMS = mydialog.ui \ |
| mywidget.ui \ |
| myconfig.ui |
| #! [32] |
| |
| |
| #! [34] |
| HEADERS = myclass.h \ |
| login.h \ |
| mainwindow.h |
| #! [34] |
| |
| |
| #! [35] |
| INCLUDEPATH = c:/msdev/include d:/stl/include |
| #! [35] |
| |
| |
| #! [36] |
| target.path += $$[QT_INSTALL_PLUGINS]/imageformats |
| INSTALLS += target |
| #! [36] |
| |
| |
| #! [37] |
| LEXSOURCES = lexer.l |
| #! [37] |
| |
| |
| #! [38] |
| unix:LIBS += -L/usr/local/lib -lmath |
| win32:LIBS += c:/mylibs/math.lib |
| #! [38] |
| |
| |
| #! [39] |
| CONFIG += no_lflags_merge |
| #! [39] |
| |
| |
| #! [40] |
| unix:MOC_DIR = ../myproject/tmp |
| win32:MOC_DIR = c:/myproject/tmp |
| #! [40] |
| |
| |
| #! [41] |
| unix:OBJECTS_DIR = ../myproject/tmp |
| win32:OBJECTS_DIR = c:/myproject/tmp |
| #! [41] |
| |
| |
| #! [43] |
| FRAMEWORK_HEADERS.version = Versions |
| FRAMEWORK_HEADERS.files = path/to/header_one.h path/to/header_two.h |
| FRAMEWORK_HEADERS.path = Headers |
| QMAKE_BUNDLE_DATA += FRAMEWORK_HEADERS |
| #! [43] |
| |
| |
| #! [44] |
| QMAKE_BUNDLE_EXTENSION = .myframework |
| #! [44] |
| |
| |
| #! [45] |
| QMAKE_RESOURCE_FLAGS += -threshold 0 -compress 9 |
| #! [45] |
| |
| |
| #! [47] |
| QT -= gui # Only the core module is used. |
| #! [47] |
| |
| |
| #! [48] |
| unix:RCC_DIR = ../myproject/resources |
| win32:RCC_DIR = c:/myproject/resources |
| #! [48] |
| |
| |
| #! [49] |
| SOURCES = myclass.cpp \ |
| login.cpp \ |
| mainwindow.cpp |
| #! [49] |
| |
| |
| #! [50] |
| SUBDIRS = kernel \ |
| tools \ |
| myapp |
| #! [50] |
| |
| |
| #! [51] |
| SUBDIRS += my_executable my_library tests doc |
| my_executable.depends = my_library |
| tests.depends = my_executable |
| #! [51] |
| |
| |
| #! [52] |
| TEMPLATE = app |
| TARGET = myapp |
| SOURCES = main.cpp |
| #! [52] |
| |
| |
| #! [53] |
| TEMPLATE = lib |
| SOURCES = main.cpp |
| TARGET = mylib |
| #! [53] |
| |
| |
| #! [54] |
| unix:UI_DIR = ../myproject/ui |
| win32:UI_DIR = c:/myproject/ui |
| #! [54] |
| |
| |
| #! [57] |
| win32:VERSION = 1.2.3.4 # major.minor.patch.build |
| else:VERSION = 1.2.3 # major.minor.patch |
| #! [57] |
| |
| |
| #! [58] |
| YACCSOURCES = moc.y |
| #! [58] |
| |
| |
| #! [59] |
| FILE = /etc/passwd |
| FILENAME = $$basename(FILE) #passwd |
| #! [59] |
| |
| |
| #! [60] |
| CONFIG = debug |
| CONFIG += release |
| CONFIG(release, debug|release):message(Release build!) #will print |
| CONFIG(debug, debug|release):message(Debug build!) #no print |
| #! [60] |
| |
| |
| #! [61] |
| contains( drivers, network ) { |
| # drivers contains 'network' |
| message( "Configuring for network build..." ) |
| HEADERS += network.h |
| SOURCES += network.cpp |
| } |
| #! [61] |
| |
| |
| #! [62] |
| error(An error has occurred in the configuration process.) |
| #! [62] |
| |
| |
| #! [63] |
| exists( $(QTDIR)/lib/libqt-mt* ) { |
| message( "Configuring for multi-threaded Qt..." ) |
| CONFIG += thread |
| } |
| #! [63] |
| |
| |
| #! [64] |
| MY_VAR = one two three four |
| MY_VAR2 = $$join(MY_VAR, " -L", -L) -Lfive |
| MY_VAR3 = $$member(MY_VAR, 2) $$find(MY_VAR, t.*) |
| #! [64] |
| |
| |
| #! [65] |
| LIST = 1 2 3 |
| for(a, LIST):exists(file.$${a}):message(I see a file.$${a}!) |
| #! [65] |
| |
| |
| #! [66] |
| include( shared.pri ) |
| OPTIONS = standard custom |
| !include( options.pri ) { |
| message( "No custom build options specified" ) |
| OPTIONS -= custom |
| } |
| #! [66] |
| |
| |
| #! [67] |
| isEmpty( CONFIG ) { |
| CONFIG += warn_on debug |
| } |
| #! [67] |
| |
| |
| #! [68] |
| message( "This is a message" ) |
| #! [68] |
| |
| |
| #! [69] |
| !build_pass:message( "This is a message" ) |
| #! [69] |
| |
| |
| #! [70] |
| This is a test. |
| #! [70] |
| |
| |
| #! [71] |
| system("ls /bin"): HAS_BIN = TRUE |
| #! [71] |
| |
| |
| #! [72] |
| UNAME = $$system(uname -s) |
| contains( UNAME, [lL]inux ):message( This looks like Linux ($$UNAME) to me ) |
| #! [72] |
| |
| |
| #! [73] |
| ARGS = 1 2 3 2 5 1 |
| ARGS = $$unique(ARGS) #1 2 3 5 |
| #! [73] |
| |
| |
| #! [74] |
| qmake -set PROPERTY VALUE |
| #! [74] |
| |
| |
| #! [75] |
| qmake -query PROPERTY |
| qmake -query #queries all current PROPERTY/VALUE pairs |
| #! [75] |
| |
| |
| #! [77] |
| qmake -query "QT_INSTALL_PREFIX" |
| #! [77] |
| |
| |
| #! [78] |
| QMAKE_VERS = $$[QMAKE_VERSION] |
| #! [78] |
| |
| |
| #! [79] |
| documentation.path = /usr/local/program/doc |
| documentation.files = docs/* |
| #! [79] |
| |
| |
| #! [80] |
| INSTALLS += documentation |
| #! [80] |
| |
| |
| #! [81] |
| unix:documentation.extra = create_docs; mv master.doc toc.doc |
| #! [81] |
| |
| |
| #! [82] |
| target.path = /usr/local/myprogram |
| INSTALLS += target |
| #! [82] |
| |
| |
| #! [83] |
| CONFIG += create_prl |
| #! [83] |
| |
| |
| #! [84] |
| CONFIG += link_prl |
| #! [84] |
| |
| |
| #! [85] |
| QMAKE_EXT_MOC = .mymoc |
| #! [85] |
| |
| |
| #! [86] |
| mytarget.target = .buildfile |
| mytarget.commands = touch $$mytarget.target |
| mytarget.depends = mytarget2 |
| |
| mytarget2.commands = @echo Building $$mytarget.target |
| #! [86] |
| |
| |
| #! [87] |
| QMAKE_EXTRA_TARGETS += mytarget mytarget2 |
| #! [87] |
| |
| |
| #! [88] |
| new_moc.output = moc_${QMAKE_FILE_BASE}.cpp |
| new_moc.commands = moc ${QMAKE_FILE_NAME} -o ${QMAKE_FILE_OUT} |
| new_moc.depend_command = g++ -E -M ${QMAKE_FILE_NAME} | sed "s,^.*: ,," |
| new_moc.input = NEW_HEADERS |
| QMAKE_EXTRA_COMPILERS += new_moc |
| #! [88] |
| |
| |
| #! [89] |
| TARGET = myapp |
| #! [89] |
| |
| |
| #! [90] |
| DEFINES += USE_MY_STUFF |
| #! [90] |
| |
| |
| #! [91] |
| DEFINES -= USE_MY_STUFF |
| #! [91] |
| |
| |
| #! [92] |
| DEFINES *= USE_MY_STUFF |
| #! [92] |
| |
| |
| #! [93] |
| DEFINES ~= s/QT_[DT].+/QT |
| #! [93] |
| |
| |
| #! [94] |
| EVERYTHING = $$SOURCES $$HEADERS |
| message("The project contains the following files:") |
| message($$EVERYTHING) |
| #! [94] |
| |
| |
| #! [95] |
| win32:DEFINES += USE_MY_STUFF |
| #! [95] |
| |
| |
| #! [96] |
| win32:xml { |
| message(Building for Windows) |
| SOURCES += xmlhandler_win.cpp |
| } else:xml { |
| SOURCES += xmlhandler.cpp |
| } else { |
| message("Unknown configuration") |
| } |
| #! [96] |
| |
| |
| #! [97] |
| MY_VARIABLE = value |
| #! [97] |
| |
| |
| #! [98] |
| MY_DEFINES = $$DEFINES |
| #! [98] |
| |
| |
| #! [99] |
| MY_DEFINES = $${DEFINES} |
| #! [99] |
| |
| |
| #! [100] |
| TARGET = myproject_$${TEMPLATE} |
| #! [100] |
| |
| |
| #! [101] |
| target.path = $$[QT_INSTALL_PLUGINS]/designer |
| INSTALLS += target |
| #! [101] |
| |
| |
| #! [102] |
| defineReplace(functionName){ |
| #function code |
| } |
| #! [102] |
| |
| |
| #! [103] |
| CONFIG += myfeatures |
| #! [103] |
| |
| |
| #! [105] |
| PRECOMPILED_HEADER = stable.h |
| #! [105] |
| |
| |
| #! [106] |
| precompile_header:!isEmpty(PRECOMPILED_HEADER) { |
| DEFINES += USING_PCH |
| } |
| #! [106] |
| |
| |
| #! [107] |
| PRECOMPILED_HEADER = window.h |
| SOURCES = window.cpp |
| #! [107] |
| |
| |
| #! [108] |
| SOURCES += hello.cpp |
| #! [108] |
| |
| |
| #! [109] |
| SOURCES += hello.cpp |
| SOURCES += main.cpp |
| #! [109] |
| |
| |
| #! [110] |
| SOURCES = hello.cpp \ |
| main.cpp |
| #! [110] |
| |
| |
| #! [111] |
| HEADERS += hello.h |
| SOURCES += hello.cpp |
| SOURCES += main.cpp |
| #! [111] |
| |
| |
| #! [112] |
| TARGET = helloworld |
| #! [112] |
| |
| |
| #! [113] |
| HEADERS += hello.h |
| SOURCES += hello.cpp |
| SOURCES += main.cpp |
| #! [113] |
| |
| |
| #! [114] |
| qmake -o Makefile hello.pro |
| #! [114] |
| |
| |
| #! [115] |
| qmake -tp vc hello.pro |
| #! [115] |
| |
| |
| #! [116] |
| CONFIG += debug |
| HEADERS += hello.h |
| SOURCES += hello.cpp |
| SOURCES += main.cpp |
| #! [116] |
| |
| |
| #! [117] |
| win32 { |
| SOURCES += hellowin.cpp |
| } |
| #! [117] |
| |
| |
| #! [118] |
| CONFIG += debug |
| HEADERS += hello.h |
| SOURCES += hello.cpp |
| SOURCES += main.cpp |
| win32 { |
| SOURCES += hellowin.cpp |
| } |
| unix { |
| SOURCES += hellounix.cpp |
| } |
| #! [118] |
| |
| |
| #! [119] |
| !exists( main.cpp ) { |
| error( "No main.cpp file found" ) |
| } |
| #! [119] |
| |
| |
| #! [120] |
| CONFIG += debug |
| HEADERS += hello.h |
| SOURCES += hello.cpp |
| SOURCES += main.cpp |
| win32 { |
| SOURCES += hellowin.cpp |
| } |
| unix { |
| SOURCES += hellounix.cpp |
| } |
| !exists( main.cpp ) { |
| error( "No main.cpp file found" ) |
| } |
| #! [120] |
| |
| |
| #! [121] |
| win32 { |
| debug { |
| CONFIG += console |
| } |
| } |
| #! [121] |
| |
| |
| #! [122] |
| CONFIG += debug |
| HEADERS += hello.h |
| SOURCES += hello.cpp |
| SOURCES += main.cpp |
| win32 { |
| SOURCES += hellowin.cpp |
| } |
| unix { |
| SOURCES += hellounix.cpp |
| } |
| !exists( main.cpp ) { |
| error( "No main.cpp file found" ) |
| } |
| win32:debug { |
| CONFIG += console |
| } |
| #! [122] |
| |
| |
| #! [123] |
| TEMPLATE = app |
| DESTDIR = c:/helloapp |
| HEADERS += hello.h |
| SOURCES += hello.cpp |
| SOURCES += main.cpp |
| DEFINES += USE_MY_STUFF |
| CONFIG += release |
| #! [123] |
| |
| |
| #! [124] |
| make all |
| #! [124] |
| |
| |
| #! [125] |
| make |
| #! [125] |
| |
| |
| #! [126] |
| make install |
| #! [126] |
| |
| |
| #! [127] |
| CONFIG(debug, debug|release) { |
| mac: TARGET = $$join(TARGET,,,_debug) |
| win32: TARGET = $$join(TARGET,,d) |
| } |
| #! [127] |
| |
| #! [149] |
| SUBDIRS += my_executable my_library |
| my_executable.subdir = app |
| my_executable.depends = my_library |
| my_library.subdir = lib |
| #! [149] |
| |
| #! [157] |
| packagesExist(sqlite3 QtNetwork QtDeclarative) { |
| DEFINES += USE_FANCY_UI |
| } |
| #! [157] |
| |
| #! [158] |
| #ifdef USE_FANCY_UI |
| // Use the fancy UI, as we have extra packages available |
| #endif |
| #! [158] |
| |
| #! [159] |
| message($$absolute_path("readme.txt", "/home/johndoe/myproject")) |
| #! [159] |
| |
| |
| #! [160] |
| TARGET = helloworld |
| equals(TARGET, "helloworld") { |
| message("The target assignment was successful.") |
| } |
| #! [160] |
| |
| |
| #! [161] |
| CONTACT = firstname middlename surname phone |
| message($$first(CONTACT)) |
| #! [161] |
| |
| |
| #! [162] |
| CONTACT = firstname middlename surname phone |
| message($$last(CONTACT)) |
| #! [162] |
| |
| |
| #! [163] |
| message($$format_number(BAD, ibase=16 width=6 zeropad)) |
| #! [163] |
| |
| |
| #! [164] |
| ANSWER = 42 |
| greaterThan(ANSWER, 1) { |
| message("The answer might be correct.") |
| } |
| #! [164] |
| |
| |
| #! [165] |
| ANSWER = 42 |
| lessThan(ANSWER, 1) { |
| message("The answer might be wrong.") |
| } |
| #! [165] |
| |
| |
| #! [166] |
| if(linux-g++*|macx-g++*):CONFIG(debug, debug|release) { |
| message("We are on Linux or Mac OS, and we are in debug mode.") |
| } |
| #! [166] |
| |
| |
| #! [167] |
| CONTACT = firstname:middlename:surname:phone |
| message($$section(CONTACT, :, 2, 2)) |
| #! [167] |
| |
| |
| #! [168] |
| CONTACT = firstname:middlename:surname:phone |
| message($$split(CONTACT, :)) |
| #! [168] |
| |
| #! [169] |
| NARF = zort |
| unset(NARF) |
| !defined(NARF, var) { |
| message("NARF is not defined.") |
| } |
| #! [169] |
| |
| |
| #! [170] |
| for(var, $$list(foo bar baz)) { |
| ... |
| } |
| #! [170] |
| |
| |
| #! [171] |
| values = foo bar baz |
| for(var, values) { |
| ... |
| } |
| #! [171] |
| |
| |
| #! [172] |
| VALUE = 123 |
| TMP_VALUE = x$$VALUE |
| greaterThan(TMP_VALUE, x456): message("Condition may be true.") |
| #! [172] |
| |
| |
| #! [173] |
| message("First line$$escape_expand(\\n)Second line") |
| #! [173] |
| |
| |
| #! [174] |
| TEMPLATE = subdirs |
| SUBDIRS = one two three |
| prepareRecursiveTarget(check) |
| #! [174] |
| |
| |
| #! [175] |
| two.CONFIG += no_check_target |
| #! [175] |
| |
| |
| #! [176] |
| QMAKE_EXTRA_TARGETS += check |
| #! [176] |
| |
| |
| #! [177] |
| # <project root>/features/mycheck.prf |
| equals(TEMPLATE, subdirs) { |
| prepareRecursiveTarget(check) |
| } else { |
| check.commands = echo hello user |
| } |
| QMAKE_EXTRA_TARGETS += check |
| #! [177] |
| |
| |
| #! [178] |
| # <project root>/.qmake.conf |
| CONFIG += mycheck |
| #! [178] |
| |
| |
| #! [179] |
| # <project root>/project.pro |
| load(configure) |
| #! [179] |
| |
| |
| #! [180] |
| # <project root>/config.tests/test/test.pro |
| SOURCES = main.cpp |
| LIBS += -ltheFeature |
| # Note that the test project is built without Qt by default. |
| #! [180] |
| |
| |
| #! [181] |
| // <project root>/config.tests/test/main.cpp |
| #include <TheFeature/MainHeader.h> |
| int main() { return featureFunction(); } |
| #! [181] |
| |
| |
| #! [182] |
| # <project root>/project.pro |
| qtCompileTest(test) |
| #! [182] |
| |
| #! [183] |
| # <project root>/project.pro |
| QMAKE_SONAME_PREFIX = @rpath |
| #! [183] |
| |
| #! [184] |
| # <project root>/project.pro |
| QMAKE_SONAME_PREFIX = @executable_path/../Frameworks |
| QMAKE_SONAME_PREFIX = @loader_path/Frameworks |
| QMAKE_SONAME_PREFIX = /Library/Frameworks |
| #! [184] |
| |
| #! [185] |
| VERSION_PE_HEADER = 1.2 |
| #! [185] |
| |
| #! [186] |
| RC_DEFINES += USE_MY_STUFF |
| #! [186] |
| |
| #! [187] |
| win32-g++:contains(QMAKE_HOST.arch, x86_64):{ |
| message("Host is 64bit") |
| ... |
| } |
| #! [187] |
