| /**************************************************************************** |
| ** |
| ** Copyright (C) 2017 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the documentation of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:BSD$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** BSD License Usage |
| ** Alternatively, you may use this file under the terms of the BSD license |
| ** as follows: |
| ** |
| ** "Redistribution and use in source and binary forms, with or without |
| ** modification, are permitted provided that the following conditions are |
| ** met: |
| ** * Redistributions of source code must retain the above copyright |
| ** notice, this list of conditions and the following disclaimer. |
| ** * Redistributions in binary form must reproduce the above copyright |
| ** notice, this list of conditions and the following disclaimer in |
| ** the documentation and/or other materials provided with the |
| ** distribution. |
| ** * Neither the name of The Qt Company Ltd nor the names of its |
| ** contributors may be used to endorse or promote products derived |
| ** from this software without specific prior written permission. |
| ** |
| ** |
| ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| //! [include] |
| #include <QtBluetooth/QBluetoothLocalDevice> |
| //! [include] |
| #include <QtCore/QCoreApplication> |
| #include <QtCore/QDebug> |
| #include <QtCore/QFile> |
| #include <QtCore/QObject> |
| #include <QtBluetooth/QBluetoothDeviceDiscoveryAgent> |
| #include <QtBluetooth/QBluetoothServiceDiscoveryAgent> |
| #include <QtBluetooth/QBluetoothTransferManager> |
| #include <QtBluetooth/QBluetoothTransferRequest> |
| #include <QtBluetooth/QBluetoothTransferReply> |
| |
| #include <QtBluetooth/QLowEnergyController> |
| #include <QtBluetooth/QLowEnergyService> |
| #include <QtBluetooth/QLowEnergyCharacteristic> |
| |
| //! [namespace] |
| QT_USE_NAMESPACE |
| //! [namespace] |
| |
| class MyClass : public QObject |
| { |
| Q_OBJECT |
| public: |
| MyClass() : QObject() {} |
| void localDevice(); |
| void startDeviceDiscovery(); |
| void startServiceDiscovery(); |
| void objectPush(); |
| void btleSharedData(); |
| void enableCharNotifications(); |
| |
| public slots: |
| void deviceDiscovered(const QBluetoothDeviceInfo &device); |
| void serviceDiscovered(const QBluetoothServiceInfo &service); |
| void transferFinished(QBluetoothTransferReply* reply); |
| void error(QBluetoothTransferReply::TransferError errorType); |
| void characteristicChanged(const QLowEnergyCharacteristic& ,const QByteArray&); |
| }; |
| |
| void MyClass::localDevice() { |
| //! [turningon] |
| QBluetoothLocalDevice localDevice; |
| QString localDeviceName; |
| |
| // Check if Bluetooth is available on this device |
| if (localDevice.isValid()) { |
| |
| // Turn Bluetooth on |
| localDevice.powerOn(); |
| |
| // Read local device name |
| localDeviceName = localDevice.name(); |
| |
| // Make it visible to others |
| localDevice.setHostMode(QBluetoothLocalDevice::HostDiscoverable); |
| |
| // Get connected devices |
| QList<QBluetoothAddress> remotes; |
| remotes = localDevice.connectedDevices(); |
| } |
| //! [turningon] |
| |
| |
| } |
| |
| //! [device_discovery] |
| void MyClass::startDeviceDiscovery() |
| { |
| |
| // Create a discovery agent and connect to its signals |
| QBluetoothDeviceDiscoveryAgent *discoveryAgent = new QBluetoothDeviceDiscoveryAgent(this); |
| connect(discoveryAgent, SIGNAL(deviceDiscovered(QBluetoothDeviceInfo)), |
| this, SLOT(deviceDiscovered(QBluetoothDeviceInfo))); |
| |
| // Start a discovery |
| discoveryAgent->start(); |
| |
| //... |
| } |
| |
| // In your local slot, read information about the found devices |
| void MyClass::deviceDiscovered(const QBluetoothDeviceInfo &device) |
| { |
| qDebug() << "Found new device:" << device.name() << '(' << device.address().toString() << ')'; |
| } |
| //! [device_discovery] |
| |
| //! [service_discovery] |
| void MyClass::startServiceDiscovery() |
| { |
| |
| // Create a discovery agent and connect to its signals |
| QBluetoothServiceDiscoveryAgent *discoveryAgent = new QBluetoothServiceDiscoveryAgent(this); |
| connect(discoveryAgent, SIGNAL(serviceDiscovered(QBluetoothServiceInfo)), |
| this, SLOT(serviceDiscovered(QBluetoothServiceInfo))); |
| |
| // Start a discovery |
| discoveryAgent->start(); |
| |
| //... |
| } |
| |
| // In your local slot, read information about the found devices |
| void MyClass::serviceDiscovered(const QBluetoothServiceInfo &service) |
| { |
| qDebug() << "Found new service:" << service.serviceName() |
| << '(' << service.device().address().toString() << ')'; |
| } |
| //! [service_discovery] |
| |
| void MyClass::objectPush() |
| { |
| //! [sendfile] |
| // Create a transfer manager |
| QBluetoothTransferManager *transferManager = new QBluetoothTransferManager(this); |
| |
| // Create the transfer request and file to be sent |
| QBluetoothAddress remoteAddress("00:11:22:33:44:55:66"); |
| QBluetoothTransferRequest request(remoteAddress); |
| QFile *file = new QFile("testfile.txt"); |
| |
| // Ask the transfer manager to send it |
| QBluetoothTransferReply *reply = transferManager->put(request, file); |
| if (reply->error() == QBluetoothTransferReply::NoError) { |
| |
| // Connect to the reply's signals to be informed about the status and do cleanups when done |
| QObject::connect(reply, SIGNAL(finished(QBluetoothTransferReply*)), |
| this, SLOT(transferFinished(QBluetoothTransferReply*))); |
| QObject::connect(reply, SIGNAL(error(QBluetoothTransferReply::TransferError)), |
| this, SLOT(error(QBluetoothTransferReply::TransferError))); |
| } else { |
| qWarning() << "Cannot push testfile.txt:" << reply->errorString(); |
| } |
| //! [sendfile] |
| } |
| |
| void MyClass::transferFinished(QBluetoothTransferReply* /*reply*/) |
| { |
| } |
| |
| void MyClass::error(QBluetoothTransferReply::TransferError /*errorType*/) |
| { |
| } |
| |
| void MyClass::characteristicChanged(const QLowEnergyCharacteristic &, const QByteArray &) |
| { |
| } |
| |
| void MyClass::btleSharedData() |
| { |
| QBluetoothDeviceInfo remoteDevice; |
| |
| //! [data_share_qlowenergyservice] |
| QLowEnergyService *first, *second; |
| QLowEnergyController control(remoteDevice); |
| control.connectToDevice(); |
| |
| // waiting for connection |
| |
| first = control.createServiceObject(QBluetoothUuid::BatteryService); |
| second = control.createServiceObject(QBluetoothUuid::BatteryService); |
| Q_ASSERT(first->state() == QLowEnergyService::DiscoveryRequired); |
| Q_ASSERT(first->state() == second->state()); |
| |
| first->discoverDetails(); |
| |
| Q_ASSERT(first->state() == QLowEnergyService::DiscoveringServices); |
| Q_ASSERT(first->state() == second->state()); |
| //! [data_share_qlowenergyservice] |
| } |
| |
| void MyClass::enableCharNotifications() |
| { |
| QBluetoothDeviceInfo remoteDevice; |
| QLowEnergyService *service; |
| QLowEnergyController *control = QLowEnergyController::createCentral(remoteDevice, this); |
| control->connectToDevice(); |
| |
| |
| service = control->createServiceObject(QBluetoothUuid::BatteryService, this); |
| if (!service) |
| return; |
| |
| service->discoverDetails(); |
| |
| //... wait until discovered |
| |
| //! [enable_btle_notifications] |
| //PreCondition: service details already discovered |
| QLowEnergyCharacteristic batteryLevel = service->characteristic( |
| QBluetoothUuid::BatteryLevel); |
| if (!batteryLevel.isValid()) |
| return; |
| |
| QLowEnergyDescriptor notification = batteryLevel.descriptor( |
| QBluetoothUuid::ClientCharacteristicConfiguration); |
| if (!notification.isValid()) |
| return; |
| |
| // establish hook into notifications |
| connect(service, SIGNAL(characteristicChanged(QLowEnergyCharacteristic,QByteArray)), |
| this, SLOT(characteristicChanged(QLowEnergyCharacteristic,QByteArray))); |
| |
| // enable notification |
| service->writeDescriptor(notification, QByteArray::fromHex("0100")); |
| |
| // disable notification |
| //service->writeDescriptor(notification, QByteArray::fromHex("0000")); |
| |
| // wait until descriptorWritten() signal is emitted |
| // to confirm successful write |
| //! [enable_btle_notifications] |
| } |
| |
| |
| |
| int main(int argc, char** argv) |
| { |
| QCoreApplication app(argc, argv); |
| MyClass cl; |
| |
| return app.exec(); |
| } |
| |
| #include "doc_src_qtbluetooth.moc" |