| /**************************************************************************** |
| ** |
| ** Copyright (C) 2016 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the test suite of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:GPL-EXCEPT$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** GNU General Public License Usage |
| ** Alternatively, this file may be used under the terms of the GNU |
| ** General Public License version 3 as published by the Free Software |
| ** Foundation with exceptions as appearing in the file LICENSE.GPL3-EXCEPT |
| ** included in the packaging of this file. Please review the following |
| ** information to ensure the GNU General Public License requirements will |
| ** be met: https://www.gnu.org/licenses/gpl-3.0.html. |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| //TESTED_COMPONENT=qtdeclarative |
| |
| testcase = { |
| |
| using_section_delegates: function() |
| { |
| // Test Meta-data |
| testTitle = "Using and changing section delegate properties"; |
| testBinary = "sections.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify that a Component can be set as a section header, using various properties for different collections."; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | | The view shows a single character section header for each element | |
| | Press the Criteria button | The section headers now show the full name of each item | |
| | Press Property | The section headers now show the id value for the items | |
| | Press Criteria | The section headers now only show i - the first character of id | |
| | Press Property | The section headers show the first character of the item names |')); |
| }, |
| |
| updating_sections: function() |
| { |
| // Test Meta-data |
| testTitle = "Updating Collected Sections"; |
| testBinary = "sections.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify that a section is updated when items are added."; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | | The view shows a single character section header for each element | |
| | Press the + button | A duplicate of every name is added | |
| | | Each duplicate is place in the same section as the original |')); |
| }, |
| |
| changing_section_delegates: function() |
| { |
| // Test Meta-data |
| testTitle = "Changing Section Delegates"; |
| testBinary = "sections.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify that a section delegate can be changed."; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | | The view shows a single character section header for each element | |
| | Press the Delegate button | The section headers now show as light blue rectangles | |
| | Press the Criteria button | The headers show as full names, still within light blue rectangles |')); |
| }, |
| |
| altering_listview_primary_properties: function() |
| { |
| // Test Meta-data |
| testTitle = "Altering ListView primary properties"; |
| testBinary = "alteredViews.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify that the model and delegate for a ListView can be changed"; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | | The view shows items named Model1_1 - 5, and the delegates are white with a black border | |
| | Press the Mod button | The view now shows items named Model2_1 - 5 | |
| | Press Del | The delegates are now golden with a black border | |
| | Press Mod, then Del | The view again shows items named Model1_1 - 5, and are white |')); |
| }, |
| |
| altering_listview_orientation: function() |
| { |
| // Test Meta-data |
| testTitle = "Altering ListView orientation"; |
| testBinary = "alteredViews.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify that the orientation of a listview can be changed at runtime"; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | | The view shows items named Model1_1 - 5, and the delegates are white with a black border | |
| | Press the Ori button | The view is now displayed in a horizontal orientation | |
| | | The delegates should have resized quickly and smoothly, and the text rotated anticlockwise (both animated) | |
| | Press Del | The delegates are now golden with a black border, still in horizontal orientation | |
| | Press Ori | The view again shows in a vertical orientation, with the golden delegates |')); |
| }, |
| |
| basic_view_transition: function() |
| { |
| // Test Meta-data |
| testTitle = "Basic View Transitions"; |
| testBinary = "viewTransitions.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify a basic transition can be applied to a ListView action"; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | Press the Set A button | The Set A button shows green | |
| | Press Add | A new yellow item fades in after the currently selected item | |
| | | The other items slide down, with a slight delay for each item, giving it a flowing effect | |
| | Select the new item | | |
| | Press To Top | The item changes to light blue and moves to the top, curving out to the right of the ListView | |
| | Select an item near the top and press Remove | The selected item fades out | |
| | | The other items slide up, with a slight delay for each item, giving it a flowing effect |')); |
| }, |
| |
| switching_view_transition: function() { |
| // Test Meta-data |
| testTitle = "Switching View Transitions"; |
| testBinary = "viewTransitions.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify a basic ListView transition can be changed to another"; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | Press the Set A button | The Set A button shows green | |
| | Press Add | A new yellow item fades in after the currently selected item | |
| | | The other items slide down, with a slight delay for each item, giving it a flowing effect | |
| | Select the new item | | |
| | Press To Top | The item changes to light blue and moves to the top, curving out to the right of the ListView | |
| | Select an item near the top and press Remove | The selected item fades out | |
| | | The other items slide up, with a slight delay for each item, giving it a flowing effect | |
| | Press the Set B button | The Set B button shows green | |
| | Press Add | A new yellow item pops in after the currently selected item | |
| | | The other items tumble down in a disorderly manner | |
| | Select the new item | | |
| | Press To Top | The item changes from red to light blue and curves out to the right of the ListView, bouncing in at the top | |
| | Select an item near the top and press Remove | The selected item pops out | |
| | | The other items slide up, with a slight delay for each item, giving it a flowing effect |')); |
| }, |
| |
| different_transitions_for_every_operation: function() { |
| // Test Meta-data |
| testTitle = "Different Transitions for all Operations"; |
| testBinary = "viewTransitions.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify a different Transition can be applied to displacement from adding, moving and removing."; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | Press the Set C button | The Set C button shows green | |
| | Press Add | A new yellow item swoops in from the side | |
| | | The other items jitter down, with a slight delay for each item | |
| | Select the new item | | |
| | Press To Top | The item changes from red to light blue and moves to the top, curving out to the right of the ListView | |
| | | The other items bounce down in a solid block | |
| | Select an item near the top and press Remove | The selected item fades out in a flashing manner | |
| | | The other items snap up, with a slight delay for each item | |
| | Press the Append button a few times | Each added item swoops in from alternating sides | ')); |
| }, |
| |
| delegates_and_effects: function() { |
| testTitle = "Delegates and effects"; |
| testBinary = "viewTransitions.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify a delegate in transition can show effects."; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | Press the Set D button | The Set D button shows green | |
| | Select a lower item | The item is highlighted | |
| | Press To Top | The item fades to red particles, shifts to the top, and fades back to a normal delegate | |
| | | The other items shuffle down |')); |
| }, |
| |
| attached_onremove_property: function() { |
| testTitle = "Using the attached onRemove property"; |
| testBinary = "onRemove.qml"; |
| testSource: "$QTDIR/qtdeclarative/tests/system/listview"; |
| testGoal = "Verify the onRemove attached property can be assigned."; |
| testPreconditions = "None"; |
| testGroups = "BAT,QtQuick 2.0"; |
| testRequirements = "QTBUG-21504: Enable transitions for add/move/remove operations on views"; |
| |
| // Test Steps |
| prompt(twiki('---+++ ' + testTitle + '<br><br> |
| *Goal:* ' + testGoal + '<br> |
| *Pre-Requisites:* ' + testPreconditions + '<br> |
| *Tested Binary:* ' + testBinary + '<br> |
| | *Step* | *Verification* | |
| | Run '+testBinary+' | Application has started, showing a ListView | |
| | Press the <b>-</b> button | The selected item disappears in a shower of sparks |')); |
| } |
| } |