| /**************************************************************************** |
| ** |
| ** Copyright (C) 2016 The Qt Company Ltd. |
| ** Contact: https://www.qt.io/licensing/ |
| ** |
| ** This file is part of the test suite of the Qt Toolkit. |
| ** |
| ** $QT_BEGIN_LICENSE:BSD$ |
| ** Commercial License Usage |
| ** Licensees holding valid commercial Qt licenses may use this file in |
| ** accordance with the commercial license agreement provided with the |
| ** Software or, alternatively, in accordance with the terms contained in |
| ** a written agreement between you and The Qt Company. For licensing terms |
| ** and conditions see https://www.qt.io/terms-conditions. For further |
| ** information use the contact form at https://www.qt.io/contact-us. |
| ** |
| ** BSD License Usage |
| ** Alternatively, you may use this file under the terms of the BSD license |
| ** as follows: |
| ** |
| ** "Redistribution and use in source and binary forms, with or without |
| ** modification, are permitted provided that the following conditions are |
| ** met: |
| ** * Redistributions of source code must retain the above copyright |
| ** notice, this list of conditions and the following disclaimer. |
| ** * Redistributions in binary form must reproduce the above copyright |
| ** notice, this list of conditions and the following disclaimer in |
| ** the documentation and/or other materials provided with the |
| ** distribution. |
| ** * Neither the name of The Qt Company Ltd nor the names of its |
| ** contributors may be used to endorse or promote products derived |
| ** from this software without specific prior written permission. |
| ** |
| ** |
| ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." |
| ** |
| ** $QT_END_LICENSE$ |
| ** |
| ****************************************************************************/ |
| |
| import QtTest 1.0 |
| import QtQuick 2.1 |
| import "TestUtils.js" as TestUtils |
| |
| TestCase { |
| id: testcase |
| name: "Tests_Dial" |
| visible: true |
| when: windowShown |
| width: 400 |
| height: 400 |
| |
| function test_instance() { |
| var dial = Qt.createQmlObject('import QtQuick.Extras 1.4; Dial { }', testcase, ''); |
| verify (dial, "Dial: failed to create an instance") |
| verify(dial.__style) |
| compare(dial.value, 0.0) |
| compare(dial.minimumValue, 0.0) |
| compare(dial.maximumValue, 1.0) |
| compare(dial.stepSize, 0.0) |
| verify(!dial.wrap) |
| verify(!dial.activeFocusOnPress) |
| verify(!dial.containsMouse) |
| verify(!dial.pressed) |
| dial.destroy() |
| } |
| |
| function test_minimumValue() { |
| var dial = Qt.createQmlObject('import QtQuick.Extras 1.4; Dial { }', testcase, ''); |
| verify (dial, "Dial: failed to create an instance") |
| dial.minimumValue = 5 |
| dial.maximumValue = 10 |
| dial.value = 2 |
| compare(dial.minimumValue, 5) |
| compare(dial.value, 5) |
| dial.destroy() |
| } |
| |
| function test_maximumValue() { |
| var dial = Qt.createQmlObject('import QtQuick.Extras 1.4; Dial { }', testcase, ''); |
| verify (dial, "Dial: failed to create an instance") |
| dial.minimumValue = 5 |
| dial.maximumValue = 10 |
| dial.value = 15 |
| compare(dial.maximumValue, 10) |
| compare(dial.value, 10) |
| dial.destroy() |
| } |
| |
| function test_activeFocusOnPress(){ |
| var scope = Qt.createQmlObject('import QtQuick 2.2; FocusScope { focus: false }', testcase, '') |
| verify(!scope.activeFocus) |
| |
| var dial = Qt.createQmlObject('import QtQuick.Extras 1.4; Dial { }', scope, '') |
| verify (dial, "Dial: failed to create an instance") |
| verify(!dial.activeFocusOnPress) |
| verify(!dial.activeFocus) |
| verify(!scope.activeFocus) |
| mousePress(dial, dial.width / 2, dial.height / 2) |
| verify(!dial.activeFocus) |
| verify(!scope.activeFocus) |
| mouseRelease(dial, dial.width / 2, dial.height / 2) |
| verify(!dial.activeFocus) |
| verify(!scope.activeFocus) |
| |
| dial.activeFocusOnPress = true |
| verify(dial.activeFocusOnPress) |
| verify(!dial.activeFocus) |
| verify(!scope.activeFocus) |
| mousePress(dial, dial.width / 2, dial.height / 2) |
| verify(dial.activeFocus) |
| verify(scope.activeFocus) |
| mouseRelease(dial, dial.width / 2, dial.height / 2) |
| verify(dial.activeFocus) |
| verify(scope.activeFocus) |
| |
| dial.destroy() |
| } |
| |
| SignalSpy { |
| id: pressSpy |
| signalName: "pressedChanged" |
| } |
| |
| function test_pressed() { |
| var dial = Qt.createQmlObject('import QtQuick.Extras 1.4; Dial { }', testcase, '') |
| verify (dial, "Dial: failed to create an instance") |
| |
| pressSpy.target = dial |
| verify(pressSpy.valid) |
| verify(!dial.pressed) |
| |
| mousePress(dial, dial.width / 2, dial.height / 2) |
| verify(dial.pressed) |
| compare(pressSpy.count, 1) |
| |
| mouseRelease(dial, dial.width / 2, dial.height / 2) |
| verify(!dial.pressed) |
| compare(pressSpy.count, 2) |
| |
| dial.destroy() |
| } |
| |
| SignalSpy { |
| id: hoverSpy |
| signalName: "hoveredChanged" |
| } |
| |
| function test_hovered() { |
| var dial = Qt.createQmlObject('import QtQuick.Extras 1.4; Dial { }', testcase, '') |
| verify (dial, "Dial: failed to create an instance") |
| |
| hoverSpy.target = dial |
| verify(hoverSpy.valid) |
| verify(!dial.hovered) |
| |
| mouseMove(dial, dial.width / 2, dial.height / 2) |
| verify(dial.hovered) |
| compare(hoverSpy.count, 1) |
| |
| mouseMove(dial, dial.width * 2, dial.height * 2) |
| verify(!dial.hovered) |
| compare(hoverSpy.count, 2) |
| |
| dial.destroy() |
| } |
| |
| SignalSpy { |
| id: valueSpy |
| signalName: "valueChanged" |
| } |
| |
| function test_dragging_data() { |
| return [ |
| { tag: "default", min: 0, max: 1, leftValue: 0.20, topValue: 0.5, rightValue: 0.8, bottomValue: 1.0 }, |
| { tag: "scaled2", min: 0, max: 2, leftValue: 0.4, topValue: 1.0, rightValue: 1.6, bottomValue: 2.0 }, |
| { tag: "scaled1", min: -1, max: 0, leftValue: -0.8, topValue: -0.5, rightValue: -0.2, bottomValue: 0.0 } |
| ] |
| } |
| |
| function test_dragging(data) { |
| var dial = Qt.createQmlObject('import QtQuick.Extras 1.4; Dial { }', testcase, '') |
| verify(dial, "Dial: failed to create an instance") |
| dial.minimumValue = data.min |
| dial.maximumValue = data.max |
| |
| valueSpy.target = dial |
| verify(valueSpy.valid) |
| |
| // drag to the left |
| mouseDrag(dial, dial.width / 2, dial.height / 2, -dial.width / 2, 0, Qt.LeftButton) |
| fuzzyCompare(dial.value, data.leftValue, 0.1) |
| verify(valueSpy.count > 0) |
| valueSpy.clear() |
| |
| // drag to the top |
| mouseDrag(dial, dial.width / 2, dial.height / 2, 0, -dial.height / 2, Qt.LeftButton) |
| fuzzyCompare(dial.value, data.topValue, 0.1) |
| verify(valueSpy.count > 0) |
| valueSpy.clear() |
| |
| // drag to the right |
| mouseDrag(dial, dial.width / 2, dial.height / 2, dial.width / 2, 0, Qt.LeftButton) |
| fuzzyCompare(dial.value, data.rightValue, 0.1) |
| verify(valueSpy.count > 0) |
| valueSpy.clear() |
| |
| // drag to the bottom |
| mouseDrag(dial, dial.width / 2, dial.height / 2, 0, dial.height / 2, Qt.LeftButton) |
| fuzzyCompare(dial.value, data.bottomValue, 0.1) |
| verify(valueSpy.count > 0) |
| valueSpy.clear() |
| |
| dial.destroy() |
| } |
| |
| function test_outerRadius() { |
| var dial = Qt.createQmlObject("import QtQuick.Extras 1.4; Dial { }", testcase, ""); |
| verify(dial, "Dial: failed to create an instance"); |
| // Implicit width and height are identical. |
| compare(dial.__style.outerRadius, dial.width / 2); |
| |
| dial.width = 100; |
| dial.height = 250; |
| compare(dial.__style.outerRadius, dial.width / 2); |
| |
| dial.width = 250; |
| dial.height = 100; |
| compare(dial.__style.outerRadius, dial.height / 2); |
| |
| dial.destroy(); |
| } |
| |
| property Component tickmark: Rectangle { |
| objectName: "tickmark" + styleData.index |
| implicitWidth: 3 |
| implicitHeight: 8 |
| color: "#c8c8c8" |
| } |
| |
| property Component minorTickmark: Rectangle { |
| objectName: "minorTickmark" + styleData.index |
| implicitWidth: 2 |
| implicitHeight: 6 |
| color: "#c8c8c8" |
| } |
| |
| property Component tickmarkLabel: Text { |
| objectName: "tickmarkLabel" + styleData.index |
| text: styleData.value |
| color: "#c8c8c8" |
| horizontalAlignment: Text.AlignHCenter |
| verticalAlignment: Text.AlignVCenter |
| } |
| |
| function test_tickmarksVisible() { |
| var dial = Qt.createQmlObject("import QtQuick.Extras 1.4; Dial { }", testcase, ""); |
| verify(dial, "Dial: failed to create an instance"); |
| |
| dial.__style.minorTickmarkCount = 4; |
| dial.__style.tickmark = tickmark; |
| dial.__style.minorTickmark = minorTickmark; |
| dial.__style.tickmarkLabel = tickmarkLabel; |
| verify(TestUtils.findChild(dial, "tickmark0")); |
| verify(TestUtils.findChild(dial, "minorTickmark0")); |
| verify(TestUtils.findChild(dial, "tickmarkLabel0")); |
| |
| dial.tickmarksVisible = false; |
| verify(!TestUtils.findChild(dial, "tickmark0")); |
| verify(!TestUtils.findChild(dial, "minorTickmark0")); |
| verify(!TestUtils.findChild(dial, "tickmarkLabel0")); |
| |
| dial.destroy(); |
| } |
| |
| property Component focusTest: Component { |
| FocusScope { |
| signal receivedKeyPress |
| |
| Component.onCompleted: forceActiveFocus() |
| anchors.fill: parent |
| Keys.onPressed: receivedKeyPress() |
| } |
| } |
| |
| SignalSpy { |
| id: parentEventSpy |
| } |
| |
| function test_keyboardNavigation() { |
| var focusScope = focusTest.createObject(testcase); |
| verify(focusScope); |
| |
| // Tests that we've accepted events that we're interested in. |
| parentEventSpy.target = focusScope; |
| parentEventSpy.signalName = "receivedKeyPress"; |
| |
| var dial = Qt.createQmlObject("import QtQuick.Extras 1.4; Dial { }", focusScope, ""); |
| verify(dial, "Dial: failed to create an instance"); |
| compare(dial.activeFocusOnTab, true); |
| compare(dial.value, 0); |
| |
| dial.focus = true; |
| compare(dial.activeFocus, true); |
| dial.stepSize = 0.1; |
| |
| keyClick(Qt.Key_Left); |
| compare(parentEventSpy.count, 0); |
| compare(dial.value, 0); |
| |
| var keyPairs = [[Qt.Key_Left, Qt.Key_Right], [Qt.Key_Down, Qt.Key_Up]]; |
| for (var keyPairIndex = 0; keyPairIndex < 2; ++keyPairIndex) { |
| for (var i = 1; i <= 10; ++i) { |
| keyClick(keyPairs[keyPairIndex][1]); |
| compare(parentEventSpy.count, 0); |
| compare(dial.value, dial.stepSize * i); |
| } |
| |
| compare(dial.value, dial.maximumValue); |
| |
| for (i = 10; i > 0; --i) { |
| keyClick(keyPairs[keyPairIndex][0]); |
| compare(parentEventSpy.count, 0); |
| compare(dial.value, dial.stepSize * (i - 1)); |
| } |
| } |
| |
| compare(dial.value, dial.minimumValue); |
| |
| keyClick(Qt.Key_Home); |
| compare(parentEventSpy.count, 0); |
| compare(dial.value, dial.minimumValue); |
| |
| keyClick(Qt.Key_End); |
| compare(parentEventSpy.count, 0); |
| compare(dial.value, dial.maximumValue); |
| |
| keyClick(Qt.Key_End); |
| compare(parentEventSpy.count, 0); |
| compare(dial.value, dial.maximumValue); |
| |
| keyClick(Qt.Key_Home); |
| compare(parentEventSpy.count, 0); |
| compare(dial.value, dial.minimumValue); |
| |
| focusScope.destroy(); |
| } |
| |
| function test_dragToSet() { |
| var dial = Qt.createQmlObject("import QtQuick.Extras 1.4; Dial { }", testcase, ""); |
| verify(dial, "Dial: failed to create an instance"); |
| |
| dial.__style.__dragToSet = false; |
| |
| compare(dial.value, 0); |
| var lastValue = dial.value; |
| |
| mousePress(dial, dial.width, dial.height / 2, Qt.LeftButton); |
| verify(dial.value !== lastValue); |
| lastValue = dial.value; |
| mouseRelease(dial, dial.width, dial.height / 2, Qt.LeftButton); |
| |
| dial.__style.__dragToSet = true; |
| |
| mousePress(dial, dial.width / 4, dial.height / 2, Qt.LeftButton); |
| verify(dial.value === lastValue); |
| mouseRelease(dial, dial.width / 4, dial.height / 2, Qt.LeftButton); |
| |
| dial.destroy(); |
| } |
| |
| function test_valueToAngle() { |
| var dial = Qt.createQmlObject("import QtQuick.Extras 1.4; Dial { }", testcase, ""); |
| verify(dial, "Dial: failed to create an instance"); |
| |
| compare(dial.__style.valueToAngle(0.0), dial.__panel.circularTickmarkLabel.minimumValueAngle); |
| compare(dial.__style.valueToAngle(1.0), dial.__panel.circularTickmarkLabel.maximumValueAngle); |
| |
| dial.destroy(); |
| } |
| } |
