| <?xml version="1.0" encoding="utf-8"?> |
| <!DOCTYPE TS> |
| <TS version="2.1" language="pl"> |
| <context> |
| <name>AboutDialog</name> |
| <message> |
| <source>Qt Linguist</source> |
| <translation>Qt Linguist</translation> |
| </message> |
| </context> |
| <context> |
| <name>BatchTranslationDialog</name> |
| <message numerus="yes"> |
| <source>Batch translated %n entries</source> |
| <translation> |
| <numerusform>Automat przetłumaczył %n wpis</numerusform> |
| <numerusform>Automat przetłumaczył %n wpisy</numerusform> |
| <numerusform>Automat przetłumaczył %n wpisów</numerusform> |
| </translation> |
| </message> |
| <message> |
| <source>&Cancel</source> |
| <translation>&Anuluj</translation> |
| </message> |
| <message> |
| <source>Batch Translation of '%1' - Qt Linguist</source> |
| <translation>Automatyczne tłumaczenie '%1' - Qt Linguist</translation> |
| </message> |
| <message> |
| <source>Linguist batch translator</source> |
| <translation>Zautomatyzowany tłumacz Linguist'a</translation> |
| </message> |
| <message> |
| <source>Searching, please wait...</source> |
| <translation>Przeszukiwanie, proszę czekać...</translation> |
| </message> |
| <message> |
| <source>Qt Linguist - Batch Translation</source> |
| <translation>Qt Linguist - automatyczne tłumaczenie</translation> |
| </message> |
| <message> |
| <source>Options</source> |
| <translation>Opcje</translation> |
| </message> |
| <message> |
| <source>Set translated entries to finished</source> |
| <translation>Ustaw przetłumaczone wpisy jako ukończone</translation> |
| </message> |
| <message> |
| <source>Retranslate entries with existing translation</source> |
| <translation>Przetłumacz wpisy z istniejącymi tłumaczeniami</translation> |
| </message> |
| <message> |
| <source>Translate also finished entries</source> |
| <translation>Przetłumacz również ukończone wpisy</translation> |
| </message> |
| <message> |
| <source>Phrase book preference</source> |
| <translation>Ustawienia książki wyrażeń</translation> |
| </message> |
| <message> |
| <source>Move up</source> |
| <translation>Przenieś do góry</translation> |
| </message> |
| <message> |
| <source>Move down</source> |
| <translation>Przenieś w dół</translation> |
| </message> |
| <message> |
| <source>&Run</source> |
| <translation>&Uruchom</translation> |
| </message> |
| <message> |
| <source>Cancel</source> |
| <translation>Anuluj</translation> |
| </message> |
| <message> |
| <source>Note that the modified entries will be reset to unfinished if 'Set translated entries to finished' above is unchecked</source> |
| <translation>Zwróć uwagę że zmodyfikowane wpisy będą ustawione jako nieukończone jeśli znajdujące się powyżej 'Ustaw przetłumaczone wpisy jako ukończone' nie jest zaznaczone</translation> |
| </message> |
| <message> |
| <source>The batch translator will search through the selected phrase books in the order given above</source> |
| <translation>Automatyczny tłumacz będzie przeszukiwał wybrane książki wyrażeń w porządku ustalonym powyżej</translation> |
| </message> |
| </context> |
| <context> |
| <name>DataModel</name> |
| <message> |
| <source>The translation file '%1' will not be loaded because it is empty.</source> |
| <translation>Plik z tłumaczeniami "%1" nie zostanie załadowany ponieważ jest pusty.</translation> |
| </message> |
| <message> |
| <source><qt>Duplicate messages found in '%1':</source> |
| <translation><qt>Znaleziono powtórzenia w '%1':</translation> |
| </message> |
| <message> |
| <source><p>[more duplicates omitted]</source> |
| <translation><p>[pominięto resztę powtórzeń]</translation> |
| </message> |
| <message> |
| <source><p>* ID: %1</source> |
| <translation><p>* identyfikator: %1</translation> |
| </message> |
| <message> |
| <source><p>* Context: %1<br>* Source: %2</source> |
| <translation><p>* Kontekst: %1<br>* Źródło: %2</translation> |
| </message> |
| <message> |
| <source><br>* Comment: %3</source> |
| <translation><br>* Komentarz: %3</translation> |
| </message> |
| <message> |
| <source>Linguist does not know the plural rules for '%1'. |
| Will assume a single universal form.</source> |
| <translation>Linguist nie zna reguł liczby mnogiej dla "%1". |
| Przyjmie on uniwersalną formę liczby pojedynczej.</translation> |
| </message> |
| <message> |
| <source>Cannot create '%2': %1</source> |
| <translation>Nie można utworzyć '%2': %1</translation> |
| </message> |
| <message> |
| <source>Universal Form</source> |
| <translation>Forma uniwersalna</translation> |
| </message> |
| </context> |
| <context> |
| <name>ErrorsView</name> |
| <message> |
| <source>Accelerator possibly superfluous in translation.</source> |
| <translation>Prawdopodobnie nadmiarowy klawisz skrótu w tłumaczeniu.</translation> |
| </message> |
| <message> |
| <source>Accelerator possibly missing in translation.</source> |
| <translation>Prawdopodobnie brakuje klawisza skrótu w tłumaczeniu.</translation> |
| </message> |
| <message> |
| <source>Translation does not have same leading and trailing whitespace as the source text.</source> |
| <translation>Tłumaczenie nie zawiera tych samych początkowych i końcowych białych znaków co tekst źródłowy.</translation> |
| </message> |
| <message> |
| <source>Translation does not end with the same punctuation as the source text.</source> |
| <translation>Tłumaczenie nie kończy się tym samym znakiem interpunkcyjnym co tekst źródłowy.</translation> |
| </message> |
| <message> |
| <source>A phrase book suggestion for '%1' was ignored.</source> |
| <translation>Podpowiedź '%1' z książki wyrażeń została zignorowana.</translation> |
| </message> |
| <message> |
| <source>Translation does not refer to the same place markers as in the source text.</source> |
| <translation>Tłumaczenie nie zawiera tych samych znaczników co tekst źródłowy.</translation> |
| </message> |
| <message> |
| <source>Translation does not contain the necessary %n/%Ln place marker.</source> |
| <translation>Tłumaczenie nie zawiera koniecznego znacznika %n/%Ln.</translation> |
| </message> |
| <message> |
| <source>Unknown error</source> |
| <translation>Nieznany błąd</translation> |
| </message> |
| </context> |
| <context> |
| <name>FMT</name> |
| <message> |
| <source>GNU Gettext localization files</source> |
| <translation>Pliki lokalizacyjne GNU Gettext</translation> |
| </message> |
| <message> |
| <source>GNU Gettext localization template files</source> |
| <translation>Szablony plików lokalizacyjnych GNU Gettext</translation> |
| </message> |
| <message> |
| <source>Compiled Qt translations</source> |
| <translation>Skompilowane tłumaczenia Qt</translation> |
| </message> |
| <message> |
| <source>Qt Linguist 'Phrase Book'</source> |
| <translation>"Książka wyrażeń" Qt Linguista</translation> |
| </message> |
| <message> |
| <source>Qt translation sources</source> |
| <translation>Źródła tłumaczeń Qt</translation> |
| </message> |
| <message> |
| <source>XLIFF localization files</source> |
| <translation>Pliki lokalizacyjne XLIFF</translation> |
| </message> |
| </context> |
| <context> |
| <name>FindDialog</name> |
| <message> |
| <source>Cancel</source> |
| <translation>Anuluj</translation> |
| </message> |
| <message> |
| <source>Click here to close this window.</source> |
| <translation>Kliknij tutaj aby zamknąć to okno.</translation> |
| </message> |
| <message> |
| <source>Click here to find the next occurrence of the text you typed in.</source> |
| <translation>Kliknij tutaj aby znaleźć następne wystąpienie szukanego tekstu.</translation> |
| </message> |
| <message> |
| <source>Comments and contexts are searched when checked.</source> |
| <translation>Jeśli zaznaczone, przeszukuje także komentarze i konteksty.</translation> |
| </message> |
| <message> |
| <source>Find Next</source> |
| <translation>Znajdź następny</translation> |
| </message> |
| <message> |
| <source>Options</source> |
| <translation>Opcje</translation> |
| </message> |
| <message> |
| <source>Source texts are searched when checked.</source> |
| <translation>Jeśli zaznaczone przeszukuje także teksty źródłowe.</translation> |
| </message> |
| <message> |
| <source>Texts such as 'TeX' and 'tex' are considered as different when checked.</source> |
| <translation>Jeśli zaznaczone, teksty 'TeX' oraz 'tex' są interpretowane jako różne.</translation> |
| </message> |
| <message> |
| <source>This window allows you to search for some text in the translation source file.</source> |
| <translation>Pozwala na szukanie w językowym pliku źródłowym.</translation> |
| </message> |
| <message> |
| <source>Translations are searched when checked.</source> |
| <translation>Jeśli zaznaczone, przeszukuje także tłumaczenia.</translation> |
| </message> |
| <message> |
| <source>Type in the text to search for.</source> |
| <translation>Wprowadź tekst do wyszukania.</translation> |
| </message> |
| <message> |
| <source>Find</source> |
| <translation>Znajdź</translation> |
| </message> |
| <message> |
| <source>&Find what:</source> |
| <translation>&Znajdź:</translation> |
| </message> |
| <message> |
| <source>&Source texts</source> |
| <translation>Teksty ź&ródłowe</translation> |
| </message> |
| <message> |
| <source>&Translations</source> |
| <translation>&Tłumaczenia</translation> |
| </message> |
| <message> |
| <source>&Match case</source> |
| <translation>Uwzględniaj &wielkość liter</translation> |
| </message> |
| <message> |
| <source>&Comments</source> |
| <translation>&Komentarze</translation> |
| </message> |
| <message> |
| <source>Ignore &accelerators</source> |
| <translation>Ignoruj kl&awisze skrótów</translation> |
| </message> |
| <message> |
| <source></source> |
| <comment>Choose Edit|Find from the menu bar or press Ctrl+F to pop up the Find dialog</comment> |
| <translation></translation> |
| </message> |
| <message> |
| <source>Obsoleted messages are skipped when checked.</source> |
| <translation>Pomija zdezaktualizowane wyrażenia.</translation> |
| </message> |
| <message> |
| <source>Skip &obsolete</source> |
| <translation>P&omiń zdezaktualizowane</translation> |
| </message> |
| </context> |
| <context> |
| <name>FormMultiWidget</name> |
| <message> |
| <source>Alt+Delete</source> |
| <extracomment>translate, but don't change</extracomment> |
| <translation>Alt+Delete</translation> |
| </message> |
| <message> |
| <source>Shift+Alt+Insert</source> |
| <extracomment>translate, but don't change</extracomment> |
| <translation>Shift+Alt+Insert</translation> |
| </message> |
| <message> |
| <source>Alt+Insert</source> |
| <extracomment>translate, but don't change</extracomment> |
| <translation>Alt+Insert</translation> |
| </message> |
| <message> |
| <source>Confirmation - Qt Linguist</source> |
| <translation>Potwierdzenie - Qt Linguist</translation> |
| </message> |
| <message> |
| <source>Delete non-empty length variant?</source> |
| <translation>Skasować niepusty wariant?</translation> |
| </message> |
| </context> |
| <context> |
| <name>LRelease</name> |
| <message numerus="yes"> |
| <source>Dropped %n message(s) which had no ID.</source> |
| <translation> |
| <numerusform>Opuszczono %n wyrażenie które nie miało identyfikatora.</numerusform> |
| <numerusform>Opuszczono %n wyrażenia które nie miały identyfikatorów.</numerusform> |
| <numerusform>Opuszczono %n wyrażeń które nie miały identyfikatorów.</numerusform> |
| </translation> |
| </message> |
| <message numerus="yes"> |
| <source>Excess context/disambiguation dropped from %n message(s).</source> |
| <translation> |
| <numerusform>Opuszczono nadmiarowy kontekst/ujednoznacznienie w %n wyrażeniu.</numerusform> |
| <numerusform>Opuszczono nadmiarowe konteksty/ujednoznacznienia w %n wyrażeniach.</numerusform> |
| <numerusform>Opuszczono nadmiarowe konteksty/ujednoznacznienia w %n wyrażeniach.</numerusform> |
| </translation> |
| </message> |
| <message numerus="yes"> |
| <source> Generated %n translation(s) (%1 finished and %2 unfinished)</source> |
| <translation> |
| <numerusform> Wygenerowano %n tłumaczenie (przetłumaczonych %1, nieprzetłumaczonych %2)</numerusform> |
| <numerusform> Wygenerowano %n tłumaczenia (przetłumaczonych %1, nieprzetłumaczonych %2)</numerusform> |
| <numerusform> Wygenerowano %n tłumaczeń (przetłumaczonych %1, nieprzetłumaczonych %2)</numerusform> |
| </translation> |
| </message> |
| <message numerus="yes"> |
| <source> Ignored %n untranslated source text(s)</source> |
| <translation> |
| <numerusform> Pominięto %n nieprzetłumaczony tekst źródłowy</numerusform> |
| <numerusform> Pominięto %n nieprzetłumaczone teksty źródłowe</numerusform> |
| <numerusform> Pominięto %n nieprzetłumaczonych tekstów źródłowych</numerusform> |
| </translation> |
| </message> |
| </context> |
| <context> |
| <name>MainWindow</name> |
| <message> |
| <source>About Qt</source> |
| <translation>Informacje o Qt</translation> |
| </message> |
| <message> |
| <source>About Qt Linguist</source> |
| <translation>Informacje o Qt Linguist</translation> |
| </message> |
| <message> |
| <source>&Accelerators</source> |
| <translation>Klawisze &skrótów</translation> |
| </message> |
| <message> |
| <source>Batch translate all entries using the information in the phrase books.</source> |
| <translation>Automatycznie tłumaczy wszystkie wpisy używając książek wyrażeń.</translation> |
| </message> |
| <message> |
| <source>&Close Phrase Book</source> |
| <translation>&Zamknij książkę wyrażeń</translation> |
| </message> |
| <message> |
| <source>Close this window and exit.</source> |
| <translation>Zamknij okno i zakończ program.</translation> |
| </message> |
| <message> |
| <source>Continue the search where it was left.</source> |
| <translation>Kontynuuj przeszukiwanie od miejsca gdzie je zatrzymano.</translation> |
| </message> |
| <message> |
| <source>Copies the source text into the translation field.</source> |
| <translation>Kopiuje tekst źródłowy do pola z tłumaczeniem.</translation> |
| </message> |
| <message> |
| <source>&Copy</source> |
| <translation>S&kopiuj</translation> |
| </message> |
| <message> |
| <source>Copy the selected translation text to the clipboard.</source> |
| <translation>Skopiuj zaznaczony tekst do schowka.</translation> |
| </message> |
| <message> |
| <source>Copy the selected translation text to the clipboard and deletes it.</source> |
| <translation>Skopiuj zaznaczony tekst do schowka i usuń go.</translation> |
| </message> |
| <message> |
| <source>Create a new phrase book.</source> |
| <translation>Utwórz nową książkę wyrażeń.</translation> |
| </message> |
| <message> |
| <source>Create a Qt message file suitable for released applications from the current message file.</source> |
| <translation>Utwórz binarny plik z tłumaczeniami na podstawie bieżącego tłumaczenia, gotowy do użycia w aplikacjach.</translation> |
| </message> |
| <message> |
| <source>Ctrl+A</source> |
| <translation>Ctrl+A</translation> |
| </message> |
| <message> |
| <source>Ctrl+B</source> |
| <translation>Ctrl+B</translation> |
| </message> |
| <message> |
| <source>Ctrl+C</source> |
| <translation>Ctrl+C</translation> |
| </message> |
| <message> |
| <source>Ctrl+F</source> |
| <translation>Ctrl+F</translation> |
| </message> |
| <message> |
| <source>Ctrl+H</source> |
| <translation>Ctrl+H</translation> |
| </message> |
| <message> |
| <source>Ctrl+K</source> |
| <translation>Ctrl+K</translation> |
| </message> |
| <message> |
| <source>Ctrl+N</source> |
| <translation>Ctrl+N</translation> |
| </message> |
| <message> |
| <source>Ctrl+O</source> |
| <translation>Ctrl+O</translation> |
| </message> |
| <message> |
| <source>Ctrl+P</source> |
| <translation>Ctrl+P</translation> |
| </message> |
| <message> |
| <source>Ctrl+Q</source> |
| <translation>Ctrl+Q</translation> |
| </message> |
| <message> |
| <source>Open Read-O&nly...</source> |
| <translation>Otwórz tylko do od&czytu...</translation> |
| </message> |
| <message> |
| <source>&Save All</source> |
| <translation>Zapisz &wszystko</translation> |
| </message> |
| <message> |
| <source>Ctrl+S</source> |
| <translation>Ctrl+S</translation> |
| </message> |
| <message> |
| <source>Ctrl+Shift+K</source> |
| <translation>Ctrl+Shift+K</translation> |
| </message> |
| <message> |
| <source>Ctrl+V</source> |
| <translation>Ctrl+V</translation> |
| </message> |
| <message> |
| <source>Ctrl+X</source> |
| <translation>Ctrl+X</translation> |
| </message> |
| <message> |
| <source>Ctrl+Y</source> |
| <translation>Ctrl+Y</translation> |
| </message> |
| <message> |
| <source>Ctrl+Z</source> |
| <translation>Ctrl+Z</translation> |
| </message> |
| <message> |
| <source>Cu&t</source> |
| <translation>Wy&tnij</translation> |
| </message> |
| <message> |
| <source>&Display guesses</source> |
| <translation>Pokaż &podpowiedzi</translation> |
| </message> |
| <message> |
| <source>&Done and Next</source> |
| <translation>&Zrobione i do następnego</translation> |
| </message> |
| <message> |
| <source>&Edit</source> |
| <translation>&Edycja</translation> |
| </message> |
| <message> |
| <source>Edit</source> |
| <translation>Edycja</translation> |
| </message> |
| <message> |
| <source>&Edit Phrase Book</source> |
| <translation>&Redaguj książkę wyrażeń</translation> |
| </message> |
| <message> |
| <source>&Ending Punctuation</source> |
| <translation>Za&kończenia interpunkcyjne</translation> |
| </message> |
| <message> |
| <source>Enter What's This? mode.</source> |
| <translation>Wejdź do trybu "Co to jest?".</translation> |
| </message> |
| <message> |
| <source>E&xit</source> |
| <translation>Za&kończ</translation> |
| </message> |
| <message> |
| <source>F1</source> |
| <translation>F1</translation> |
| </message> |
| <message> |
| <source>F3</source> |
| <translation>F3</translation> |
| </message> |
| <message> |
| <source>F5</source> |
| <translation>F5</translation> |
| </message> |
| <message> |
| <source>File</source> |
| <translation>Plik</translation> |
| </message> |
| <message> |
| <source>&File</source> |
| <translation>&Plik</translation> |
| </message> |
| <message> |
| <source>Find &Next</source> |
| <translation>Znajdź &następny</translation> |
| </message> |
| <message> |
| <source>Form Preview Tool</source> |
| <translation>Podgląd formularzy</translation> |
| </message> |
| <message> |
| <source>Help</source> |
| <translation>Pomoc</translation> |
| </message> |
| <message> |
| <source>&Help</source> |
| <translation>P&omoc</translation> |
| </message> |
| <message> |
| <source>MainWindow</source> |
| <translation>Okno główne</translation> |
| </message> |
| <message> |
| <source>&Manual</source> |
| <translation>Pod&ręcznik</translation> |
| </message> |
| <message> |
| <source>Ne&xt</source> |
| <translation>N&astępne</translation> |
| </message> |
| <message> |
| <source>&Next Unfinished</source> |
| <translation>&Następne nieukończone</translation> |
| </message> |
| <message> |
| <source>Open a phrase book to assist translation.</source> |
| <translation>Otwórz książkę wyrażeń pomocną przy tłumaczeniu.</translation> |
| </message> |
| <message> |
| <source>Open a Qt translation source file (TS file) for editing</source> |
| <translation>Otwórz plik z tłumaczeniami Qt (plik TS) do redagowania</translation> |
| </message> |
| <message> |
| <source>Open/Refresh Form &Preview</source> |
| <translation>Otwórz/odśwież &podgląd formularzy</translation> |
| </message> |
| <message> |
| <source>&Paste</source> |
| <translation>Wk&lej</translation> |
| </message> |
| <message> |
| <source>Paste the clipboard text into the translation.</source> |
| <translation>Wklej tekst ze schowka do pola z tłumaczeniem.</translation> |
| </message> |
| <message> |
| <source>&Phrase matches</source> |
| <translation>&Cudzysłowy</translation> |
| </message> |
| <message> |
| <source>&Phrases</source> |
| <translation>W&yrażenia</translation> |
| </message> |
| <message> |
| <source>Place &Marker Matches</source> |
| <translation>Z&naczniki</translation> |
| </message> |
| <message> |
| <source>P&rev</source> |
| <translation>P&oprzednie</translation> |
| </message> |
| <message> |
| <source>&Prev Unfinished</source> |
| <translation>&Poprzednie nieukończone</translation> |
| </message> |
| <message> |
| <source>&Print Phrase Book</source> |
| <translation>Wy&drukuj książkę wyrażeń</translation> |
| </message> |
| <message> |
| <source>&Redo</source> |
| <translation>&Przywróć</translation> |
| </message> |
| <message> |
| <source>Redo an undone editing operation performed on the translation.</source> |
| <translation>Przywróć ostatnio cofniętą zmianę w tłumaczeniach.</translation> |
| </message> |
| <message> |
| <source>&Release</source> |
| <translation>W&ydaj</translation> |
| </message> |
| <message> |
| <source>Release As...</source> |
| <translation>Wydaj jako...</translation> |
| </message> |
| <message> |
| <source>Replace the translation on all entries that matches the search source text.</source> |
| <translation>Zamienia tłumaczenia we wszystkich pasujących do wzorca wpisach.</translation> |
| </message> |
| <message> |
| <source></source> |
| <comment>This is the application's main window.</comment> |
| <translation></translation> |
| </message> |
| <message> |
| <source>Source text</source> |
| <translation>Tekst źródłowy</translation> |
| </message> |
| <message> |
| <source>Index</source> |
| <translation>Indeks</translation> |
| </message> |
| <message> |
| <source>Context</source> |
| <translation>Kontekst</translation> |
| </message> |
| <message> |
| <source>Items</source> |
| <translation>Elementy</translation> |
| </message> |
| <message> |
| <source>This panel lists the source contexts.</source> |
| <translation>Ten panel pokazuje listę kontekstów.</translation> |
| </message> |
| <message> |
| <source>Strings</source> |
| <translation>Tłumaczenia</translation> |
| </message> |
| <message> |
| <source>Phrases and guesses</source> |
| <translation>Wyrażenia i podpowiedzi</translation> |
| </message> |
| <message> |
| <source>Sources and Forms</source> |
| <translation>Źródła i formularze</translation> |
| </message> |
| <message> |
| <source>Warnings</source> |
| <translation>Ostrzeżenia</translation> |
| </message> |
| <message> |
| <source> MOD </source> |
| <comment>status bar: file(s) modified</comment> |
| <translation> MOD </translation> |
| </message> |
| <message> |
| <source>Loading...</source> |
| <translation>Ładowanie...</translation> |
| </message> |
| <message> |
| <source>Loading File - Qt Linguist</source> |
| <translation>Wczytywanie pliku - Qt Linguist</translation> |
| </message> |
| <message> |
| <source>The file '%1' does not seem to be related to the currently open file(s) '%2'. |
| |
| Close the open file(s) first?</source> |
| <translation>Plik '%1' nie wygląda na związany z otwartym już plikiem (plikami) '%2'. |
| |
| Czy chcesz najpierw zamknąć otwarty plik (pliki)?</translation> |
| </message> |
| <message> |
| <source>The file '%1' does not seem to be related to the file '%2' which is being loaded as well. |
| |
| Skip loading the first named file?</source> |
| <translation>Plik '%1' również nie wygląda na związany z otwieranym właśnie plikiem '%2'. |
| |
| Czy chcesz pominąć pierwszy plik?</translation> |
| </message> |
| <message numerus="yes"> |
| <source>%n translation unit(s) loaded.</source> |
| <translation> |
| <numerusform>Załadowano %n część z tłumaczeniami.</numerusform> |
| <numerusform>Załadowano %n części z tłumaczeniami.</numerusform> |
| <numerusform>Załadowano %n części z tłumaczeniami.</numerusform> |
| </translation> |
| </message> |
| <message> |
| <source>Related files (%1);;</source> |
| <translation>Związane pliki (%1);;</translation> |
| </message> |
| <message> |
| <source>Open Translation Files</source> |
| <translation>Otwórz pliki z tłumaczeniami</translation> |
| </message> |
| <message> |
| <source>File saved.</source> |
| <translation>Plik zachowany.</translation> |
| </message> |
| <message> |
| <source>Release</source> |
| <translation>Wydaj</translation> |
| </message> |
| <message> |
| <source>Qt message files for released applications (*.qm) |
| All files (*)</source> |
| <translation>Pliki z wydanymi tłumaczeniami (*.qm) |
| Wszystkie pliki (*)</translation> |
| </message> |
| <message> |
| <source>File created.</source> |
| <translation>Plik utworzony.</translation> |
| </message> |
| <message> |
| <source>Printing...</source> |
| <translation>Drukowanie...</translation> |
| </message> |
| <message> |
| <source>Context: %1</source> |
| <translation>Kontekst: %1</translation> |
| </message> |
| <message> |
| <source>finished</source> |
| <translation>zakończony</translation> |
| </message> |
| <message> |
| <source>unresolved</source> |
| <translation>nierozwiązany</translation> |
| </message> |
| <message> |
| <source>obsolete</source> |
| <translation>zdezaktualizowany</translation> |
| </message> |
| <message> |
| <source>Printing... (page %1)</source> |
| <translation>Drukowanie...(strona %1)</translation> |
| </message> |
| <message> |
| <source>Printing completed</source> |
| <translation>Drukowanie zakończone</translation> |
| </message> |
| <message> |
| <source>Printing aborted</source> |
| <translation>Drukowanie przerwane</translation> |
| </message> |
| <message> |
| <source>Search wrapped.</source> |
| <translation>Szukanie od początku.</translation> |
| </message> |
| <message> |
| <source>Qt Linguist</source> |
| <translation>Qt Linguist</translation> |
| </message> |
| <message> |
| <source>Cannot find the string '%1'.</source> |
| <translation>Nie można znaleźć tekstu '%1'.</translation> |
| </message> |
| <message> |
| <source>Search And Translate in '%1' - Qt Linguist</source> |
| <translation>Wyszukiwanie i tłumaczenie w '%1' - Qt Linguist</translation> |
| </message> |
| <message> |
| <source>Translate - Qt Linguist</source> |
| <translation>Tłumaczenie - Qt Linguist</translation> |
| </message> |
| <message numerus="yes"> |
| <source>Translated %n entry(s)</source> |
| <translation> |
| <numerusform>Przetłumaczono %n wpis</numerusform> |
| <numerusform>Przetłumaczono %n wpisy</numerusform> |
| <numerusform>Przetłumaczono %n wpisów</numerusform> |
| </translation> |
| </message> |
| <message> |
| <source>No more occurrences of '%1'. Start over?</source> |
| <translation>Brak więcej "%1". Rozpocząć od nowa?</translation> |
| </message> |
| <message> |
| <source>Create New Phrase Book</source> |
| <translation>Utwórz nową książkę wyrażeń</translation> |
| </message> |
| <message> |
| <source>Qt phrase books (*.qph) |
| All files (*)</source> |
| <translation>Książki wyrażeń Qt (*.qph) |
| Wszystkie pliki (*)</translation> |
| </message> |
| <message> |
| <source>Phrase book created.</source> |
| <translation>Utworzono podręcznik wyrażeń.</translation> |
| </message> |
| <message> |
| <source>Open Phrase Book</source> |
| <translation>Otwórz książkę wyrażeń</translation> |
| </message> |
| <message> |
| <source>Qt phrase books (*.qph);;All files (*)</source> |
| <translation>Książki wyrażeń Qt (*.qph);;Wszystkie pliki (*)</translation> |
| </message> |
| <message numerus="yes"> |
| <source>%n phrase(s) loaded.</source> |
| <translation> |
| <numerusform>Wczytano %n wyrażenie.</numerusform> |
| <numerusform>Wczytano %n wyrażenia.</numerusform> |
| <numerusform>Wczytano %n wyrażeń.</numerusform> |
| </translation> |
| </message> |
| <message> |
| <source>Add to phrase book</source> |
| <translation>Dodaj do książki wyrażeń</translation> |
| </message> |
| <message> |
| <source>No appropriate phrasebook found.</source> |
| <translation>Brak odpowiedniej książki wyrażeń.</translation> |
| </message> |
| <message> |
| <source>Adding entry to phrasebook %1</source> |
| <translation>Dodawanie wpisu do książki wyrażeń %1</translation> |
| </message> |
| <message> |
| <source>Select phrase book to add to</source> |
| <translation>Wybierz książkę do której chcesz dodać</translation> |
| </message> |
| <message> |
| <source>Unable to launch Qt Assistant (%1)</source> |
| <translation>Nie można uruchomić Qt Assistant (%1)</translation> |
| </message> |
| <message> |
| <source>Version %1</source> |
| <translation>Wersja %1</translation> |
| </message> |
| <message> |
| <source><center><img src=":/images/splash.png"/></img><p>%1</p></center><p>Qt Linguist is a tool for adding translations to Qt applications.</p><p>Copyright (C) %2 The Qt Company Ltd.</source> |
| <translation><center><img src=":/images/splash.png"/></img><p>%1</p></center><p>Qt Linguist jest narzędziem umożliwiającym dodawanie tłumaczeń do aplikacji używających Qt.</p><p>Prawa autorskie %2 The Qt Company Ltd.</translation> |
| </message> |
| <message> |
| <source>Do you want to save the modified files?</source> |
| <translation>Czy chcesz zachować zmodyfikowane pliki?</translation> |
| </message> |
| <message> |
| <source>Do you want to save '%1'?</source> |
| <translation>Czy chcesz zachować '%1'?</translation> |
| </message> |
| <message> |
| <source>Qt Linguist[*]</source> |
| <translation>Qt Linguist[*]</translation> |
| </message> |
| <message> |
| <source>%1[*] - Qt Linguist</source> |
| <translation>%1[*] - Qt Linguist</translation> |
| </message> |
| <message> |
| <source>No untranslated translation units left.</source> |
| <translation>Wszystkie wyrażenia są przetłumaczone.</translation> |
| </message> |
| <message> |
| <source>&Window</source> |
| <translation>&Okno</translation> |
| </message> |
| <message> |
| <source>Minimize</source> |
| <translation>Zminimalizuj</translation> |
| </message> |
| <message> |
| <source>Ctrl+M</source> |
| <translation>Ctrl+M</translation> |
| </message> |
| <message> |
| <source>Display the manual for %1.</source> |
| <translation>Pokaż podręcznik dla %1.</translation> |
| </message> |
| <message> |
| <source>Display information about %1.</source> |
| <translation>Pokaż informacje o %1.</translation> |
| </message> |
| <message> |
| <source>&Save '%1'</source> |
| <translation>&Zachowaj '%1'</translation> |
| </message> |
| <message> |
| <source>Save '%1' &As...</source> |
| <translation>Zachowaj '%1' &jako...</translation> |
| </message> |
| <message> |
| <source>Release '%1'</source> |
| <translation>Wydaj '%1'</translation> |
| </message> |
| <message> |
| <source>Release '%1' As...</source> |
| <translation>Wydaj '%1' jako...</translation> |
| </message> |
| <message> |
| <source>&Close '%1'</source> |
| <translation>Za&mknij '%1'</translation> |
| </message> |
| <message> |
| <source>&Save</source> |
| <translation>&Zachowaj</translation> |
| </message> |
| <message> |
| <source>Save &As...</source> |
| <translation>Zachowaj j&ako...</translation> |
| </message> |
| <message> |
| <source>&Close</source> |
| <translation>Za&mknij</translation> |
| </message> |
| <message> |
| <source>Save All</source> |
| <translation>Zachowaj wszystko</translation> |
| </message> |
| <message> |
| <source>&Release All</source> |
| <translation>Wydaj &wszystko</translation> |
| </message> |
| <message> |
| <source>Close All</source> |
| <translation>Zamknij wszystko</translation> |
| </message> |
| <message> |
| <source>Translation File &Settings for '%1'...</source> |
| <translation>&Ustawienia pliku z tłumaczeniami dla '%1'...</translation> |
| </message> |
| <message> |
| <source>&Batch Translation of '%1'...</source> |
| <translation>&Automatyczne tłumaczenie '%1'...</translation> |
| </message> |
| <message> |
| <source>Search And &Translate in '%1'...</source> |
| <translation>Wyszukiwanie i &tłumaczenie w '%1'...</translation> |
| </message> |
| <message> |
| <source>Search And &Translate...</source> |
| <translation>Wyszukiwanie i &tłumaczenie...</translation> |
| </message> |
| <message> |
| <source>Cannot read from phrase book '%1'.</source> |
| <translation>Nie można odczytać z książki wyrażeń '%1'.</translation> |
| </message> |
| <message> |
| <source>Close this phrase book.</source> |
| <translation>Zamknij tę książkę wyrażeń.</translation> |
| </message> |
| <message> |
| <source>Enables you to add, modify, or delete entries in this phrase book.</source> |
| <translation>Pozwala na dodawanie, modyfikowanie i usuwanie wpisów w tej książce.</translation> |
| </message> |
| <message> |
| <source>Print the entries in this phrase book.</source> |
| <translation>Wydrukuj wpisy z książki wyrażeń.</translation> |
| </message> |
| <message> |
| <source>Cannot create phrase book '%1'.</source> |
| <translation>Nie można utworzyć książki wyrażeń '%1'.</translation> |
| </message> |
| <message> |
| <source>Do you want to save phrase book '%1'?</source> |
| <translation>Czy chcesz zachować książkę wyrażeń '%1'?</translation> |
| </message> |
| <message> |
| <source>All</source> |
| <translation>Wszystko</translation> |
| </message> |
| <message> |
| <source>Save As...</source> |
| <translation>Zachowaj jako...</translation> |
| </message> |
| <message> |
| <source>Save changes made to this Qt translation source file</source> |
| <translation>Zachowaj wprowadzone zmiany w tym pliku z tłumaczeniami</translation> |
| </message> |
| <message> |
| <source>Save changes made to this Qt translation source file into a new file.</source> |
| <translation>Zachowaj wprowadzone zmiany w tym pliku z tłumaczeniami jako nowy plik.</translation> |
| </message> |
| <message> |
| <source>Search for some text in the translation source file.</source> |
| <translation>Szukaj tekstu w pliku z tłumaczeniem.</translation> |
| </message> |
| <message> |
| <source>Select &All</source> |
| <translation>Zaznacz &wszystko</translation> |
| </message> |
| <message> |
| <source>Select the whole translation text.</source> |
| <translation>Zaznacz cały tekst tłumaczenia.</translation> |
| </message> |
| <message> |
| <source>Set whether or not to display translation guesses.</source> |
| <translation>Ustaw czy pokazywać podpowiedzi tłumaczeń.</translation> |
| </message> |
| <message> |
| <source>Shift+F1</source> |
| <translation>Shift+F1</translation> |
| </message> |
| <message> |
| <source>Sort the items back in the same order as in the message file.</source> |
| <translation>Z powrotem sortuj elementy w takiej samej kolejności jak w pliku źródłowym.</translation> |
| </message> |
| <message> |
| <source>&Statistics</source> |
| <translation>&Statystyki</translation> |
| </message> |
| <message> |
| <source>&Toolbars</source> |
| <translation>Paski &narzędzi</translation> |
| </message> |
| <message> |
| <source>&Translation</source> |
| <translation>&Tłumaczenie</translation> |
| </message> |
| <message> |
| <source>Translation</source> |
| <translation>Tłumaczenie</translation> |
| </message> |
| <message> |
| <source>&Undo</source> |
| <translation>&Cofnij</translation> |
| </message> |
| <message> |
| <source>Validation</source> |
| <translation>Walidacja</translation> |
| </message> |
| <message> |
| <source>V&alidation</source> |
| <translation>W&alidacja</translation> |
| </message> |
| <message> |
| <source>&View</source> |
| <translation>&Widok</translation> |
| </message> |
| <message> |
| <source>Vie&ws</source> |
| <translation>&Widoki</translation> |
| </message> |
| <message> |
| <source>&What's This?</source> |
| <translation>&Co to jest?</translation> |
| </message> |
| <message> |
| <source>What's This?</source> |
| <translation>Co to jest?</translation> |
| </message> |
| <message> |
| <source>&Open...</source> |
| <translation>&Otwórz...</translation> |
| </message> |
| <message> |
| <source>&Print...</source> |
| <translation>Wy&drukuj...</translation> |
| </message> |
| <message> |
| <source>&Find...</source> |
| <translation>&Znajdź...</translation> |
| </message> |
| <message> |
| <source>Toggle the validity check of ending punctuation. If the check fails, a message is shown in the warnings window.</source> |
| <translation>Przełącza sprawdzanie zgodności końcowych znaków interpunkcyjnych. W przypadku niezgodności pojawia się komunikat w oknie z ostrzeżeniami.</translation> |
| </message> |
| <message> |
| <source>&New Phrase Book...</source> |
| <translation>&Nowa książka wyrażeń...</translation> |
| </message> |
| <message> |
| <source>&Open Phrase Book...</source> |
| <translation>&Otwórz książkę wyrażeń...</translation> |
| </message> |
| <message> |
| <source>&Reset Sorting</source> |
| <translation>Wyłącz so&rtowanie</translation> |
| </message> |
| <message> |
| <source>Display translation statistics.</source> |
| <translation>Pokaż statystyki tłumaczeń.</translation> |
| </message> |
| <message> |
| <source>&Search And Translate...</source> |
| <translation>Wy&szukiwanie i tłumaczenie...</translation> |
| </message> |
| <message> |
| <source>&Batch Translation...</source> |
| <translation>Automatyczne &tłumaczenie...</translation> |
| </message> |
| <message> |
| <source>Translation File &Settings...</source> |
| <translation>&Ustawienia pliku z tłumaczeniami...</translation> |
| </message> |
| <message> |
| <source>&Add to Phrase Book</source> |
| <translation>Dod&aj do książki wyrażeń</translation> |
| </message> |
| <message> |
| <source>Ctrl+T</source> |
| <translation>Ctrl+T</translation> |
| </message> |
| <message> |
| <source>Recently Opened &Files</source> |
| <translation>Os&tatnio otwierane pliki</translation> |
| </message> |
| <message> |
| <source>Save</source> |
| <translation>Zachowaj</translation> |
| </message> |
| <message> |
| <source>Print a list of all the translation units in the current translation source file.</source> |
| <translation>Wydrukuj pełną listę wyrażeń z bieżącego pliku z tłumaczeniami.</translation> |
| </message> |
| <message> |
| <source>Undo the last editing operation performed on the current translation.</source> |
| <translation>Cofnij ostatnio wykonaną zmianę w bieżącym tłumaczeniu.</translation> |
| </message> |
| <message> |
| <source>Move to the previous unfinished item.</source> |
| <translation>Przechodzi do poprzedniego nieukończonego elementu.</translation> |
| </message> |
| <message> |
| <source>Move to the next unfinished item.</source> |
| <translation>Przechodzi do następnego nieukończonego elementu.</translation> |
| </message> |
| <message> |
| <source>Move to the previous item.</source> |
| <translation>Przejdź do poprzedniego elementu.</translation> |
| </message> |
| <message> |
| <source>Move to the next item.</source> |
| <translation>Przejdź do następnego elementu.</translation> |
| </message> |
| <message> |
| <source>Mark this item as done and move to the next unfinished item.</source> |
| <translation>Oznacz ten element jako ukończony i przejdź do następnego nieukończonego elementu.</translation> |
| </message> |
| <message> |
| <source>Copy from source text</source> |
| <translation>Skopiuj ze źródła tekstu</translation> |
| </message> |
| <message> |
| <source>Toggle the validity check of accelerators, i.e. whether the number of ampersands in the source and translation text is the same. If the check fails, a message is shown in the warnings window.</source> |
| <translation>Przełącza sprawdzanie zgodności klawiszy skrótów, tzn. czy liczba znaków: & w tekście źródłowym i w tłumaczeniu jest taka sama. W przypadku niezgodności pojawia się komunikat w oknie z ostrzeżeniami.</translation> |
| </message> |
| <message> |
| <source>Close</source> |
| <translation>Zamknij</translation> |
| </message> |
| <message> |
| <source>&Close All</source> |
| <translation>Zam&knij wszystko</translation> |
| </message> |
| <message> |
| <source>Ctrl+W</source> |
| <translation>Ctrl+W</translation> |
| </message> |
| <message> |
| <source>Toggle checking that phrase suggestions are used. If the check fails, a message is shown in the warnings window.</source> |
| <translation>Przełącza sprawdzanie czy użyto zasugerowanego wyrażenia. W przypadku niezgodności pojawia się komunikat w oknie z ostrzeżeniami.</translation> |
| </message> |
| <message> |
| <source>Toggle the validity check of place markers, i.e. whether %1, %2, ... are used consistently in the source text and translation text. If the check fails, a message is shown in the warnings window.</source> |
| <translation>Przełącza sprawdzanie zgodności znaczników, tzn. czy: %1, %2, ... są spójnie użyte w tekście źródłowym i tłumaczeniu. W przypadku niezgodności pojawia się komunikat w oknie z ostrzeżeniami.</translation> |
| </message> |
| <message> |
| <source>Ctrl+J</source> |
| <translation>Ctrl+J</translation> |
| </message> |
| <message> |
| <source>Ctrl+Shift+J</source> |
| <translation>Ctrl+Shift+J</translation> |
| </message> |
| <message> |
| <source>Previous unfinished item</source> |
| <translation>Poprzedni nieukończony element</translation> |
| </message> |
| <message> |
| <source>Next unfinished item</source> |
| <translation>Następny nieukończony element</translation> |
| </message> |
| <message> |
| <source>Move to previous item</source> |
| <translation>Przejdź do poprzedniego elementu</translation> |
| </message> |
| <message> |
| <source>Next item</source> |
| <translation>Następny element</translation> |
| </message> |
| <message> |
| <source>Mark item as done and move to the next unfinished item</source> |
| <translation>Oznacz element jako ukończony i przejdź do następnego nieukończonego elementu</translation> |
| </message> |
| <message> |
| <source>Copies the source text into the translation field</source> |
| <translation>Kopiuje tekst źródłowy do pola z tłumaczeniem</translation> |
| </message> |
| <message> |
| <source>Toggle the validity check of accelerators</source> |
| <translation>Przełącza sprawdzanie zgodności klawiszy skrótów</translation> |
| </message> |
| <message> |
| <source>Toggle the validity check of ending punctuation</source> |
| <translation>Przełącza sprawdzanie zgodności końcowych znaków interpunkcyjnych</translation> |
| </message> |
| <message> |
| <source>Toggle checking that phrase suggestions are used</source> |
| <translation>Przełącza sprawdzanie czy użyto zasugerowanego wyrażenia</translation> |
| </message> |
| <message> |
| <source>Toggle the validity check of place markers</source> |
| <translation>Przełącza sprawdzanie zgodności znaczników</translation> |
| </message> |
| <message> |
| <source>Create a Qt message file suitable for released applications from the current message file. The filename will automatically be determined from the name of the TS file.</source> |
| <translation>Utwórz binarny plik ".qm" z tłumaczeniami na podstawie bieżącego tłumaczenia, gotowy do użycia w aplikacjach. Nazwa pliku będzie automatycznie określona na podstawie nazwy pliku ".ts" z bieżącym tłumaczeniem.</translation> |
| </message> |
| <message> |
| <source>Length Variants</source> |
| <translation>Warianty tłumaczeń</translation> |
| </message> |
| <message> |
| <source>&Zoom</source> |
| <translation>&Powiększenie</translation> |
| </message> |
| <message> |
| <source>Display information about the Qt toolkit by Digia.</source> |
| <translation>Pokaż informacje o Qt.</translation> |
| </message> |
| <message> |
| <source>Visualize whitespace</source> |
| <translation>Pokazuj białe znaki</translation> |
| </message> |
| <message> |
| <source>Toggle visualize whitespace in editors</source> |
| <translation>Przełącza pokazywanie białych znaków w edytorach</translation> |
| </message> |
| <message> |
| <source>Increase</source> |
| <translation>Zwiększ</translation> |
| </message> |
| <message> |
| <source>Ctrl++</source> |
| <translation>Ctrl++</translation> |
| </message> |
| <message> |
| <source>Decrease</source> |
| <translation>Zmniejsz</translation> |
| </message> |
| <message> |
| <source>Ctrl+-</source> |
| <translation>Ctrl+-</translation> |
| </message> |
| <message> |
| <source>Reset to default</source> |
| <translation>Przywróć domyślne</translation> |
| </message> |
| <message> |
| <source>Ctrl+0</source> |
| <translation>Ctrl+0</translation> |
| </message> |
| <message> |
| <source>Surrounding &Whitespace.</source> |
| <translation>Otaczające &białe znaki</translation> |
| </message> |
| <message> |
| <source>Toggle the validity check of surrounding whitespace.</source> |
| <translation>Przełącza sprawdzanie zgodności otaczających białych znaków.</translation> |
| </message> |
| <message> |
| <source>Toggle the validity check of surrounding whitespace. If the check fails, a message is shown in the warnings window.</source> |
| <translation>Przełącza sprawdzanie zgodności otaczających białych znaków. W przypadku niezgodności pojawia się komunikat w oknie z ostrzeżeniami.</translation> |
| </message> |
| </context> |
| <context> |
| <name>MessageEditor</name> |
| <message> |
| <source></source> |
| <comment>This is the right panel of the main window.</comment> |
| <translation></translation> |
| </message> |
| <message> |
| <source>Russian</source> |
| <translation>rosyjski</translation> |
| </message> |
| <message> |
| <source>German</source> |
| <translation>niemiecki</translation> |
| </message> |
| <message> |
| <source>Japanese</source> |
| <translation>japoński</translation> |
| </message> |
| <message> |
| <source>French</source> |
| <translation>francuski</translation> |
| </message> |
| <message> |
| <source>Polish</source> |
| <translation>polski</translation> |
| </message> |
| <message> |
| <source>Chinese</source> |
| <translation>chiński</translation> |
| </message> |
| <message> |
| <source>This whole panel allows you to view and edit the translation of some source text.</source> |
| <translation>Ten panel pozwala na podgląd i redagowanie tłumaczenia tekstu źródłowego.</translation> |
| </message> |
| <message> |
| <source>Source text</source> |
| <translation>Tekst źródłowy</translation> |
| </message> |
| <message> |
| <source>This area shows the source text.</source> |
| <translation>W tym obszarze wyświetlany jest tekst źródłowy.</translation> |
| </message> |
| <message> |
| <source>Source text (Plural)</source> |
| <translation>Tekst źródłowy (liczba mnoga)</translation> |
| </message> |
| <message> |
| <source>This area shows the plural form of the source text.</source> |
| <translation>W tym obszarze wyświetlana jest forma mnoga źródłowego tekstu.</translation> |
| </message> |
| <message> |
| <source>Developer comments</source> |
| <translation>Komentarze programisty</translation> |
| </message> |
| <message> |
| <source>This area shows a comment that may guide you, and the context in which the text occurs.</source> |
| <translation>W tym obszarze wyświetlany jest komentarz oraz kontekst, w którym dany tekst wystąpił.</translation> |
| </message> |
| <message> |
| <source>Here you can enter comments for your own use. They have no effect on the translated applications.</source> |
| <translation>Tutaj można wprowadzić komentarze na własny użytek. One nie mają wpływu na przetłumaczoną aplikację.</translation> |
| </message> |
| <message> |
| <source>%1 translation (%2)</source> |
| <translation>Tłumaczenie na język %1 (%2)</translation> |
| </message> |
| <message> |
| <source>This is where you can enter or modify the translation of the above source text.</source> |
| <translation>Tutaj można wprowadzić lub zmodyfikować tłumaczenie tekstu źródłowego.</translation> |
| </message> |
| <message> |
| <source>%1 translation</source> |
| <translation>Tłumaczenie na język %1</translation> |
| </message> |
| <message> |
| <source>%1 translator comments</source> |
| <translation>Komentarze tłumacza (język %1)</translation> |
| </message> |
| <message> |
| <source>'%1' |
| Line: %2</source> |
| <translation>'%1' |
| Linia: %2</translation> |
| </message> |
| </context> |
| <context> |
| <name>MessageModel</name> |
| <message> |
| <source>Completion status for %1</source> |
| <translation>Stan ukończenia dla %1</translation> |
| </message> |
| <message> |
| <source><file header></source> |
| <translation><nagłówek pliku></translation> |
| </message> |
| <message> |
| <source><context comment></source> |
| <translation><komentarz kontekstu></translation> |
| </message> |
| <message> |
| <source><unnamed context></source> |
| <translation>nienazwany kontekst</translation> |
| </message> |
| </context> |
| <context> |
| <name>MsgEdit</name> |
| <message> |
| <source></source> |
| <comment>This is the right panel of the main window.</comment> |
| <translation></translation> |
| </message> |
| </context> |
| <context> |
| <name>PhraseBook</name> |
| <message> |
| <source>Parse error at line %1, column %2 (%3).</source> |
| <translation>Błąd parsowania w linii %1, w kolumnie %2 (%3).</translation> |
| </message> |
| </context> |
| <context> |
| <name>PhraseBookBox</name> |
| <message> |
| <source>(New Entry)</source> |
| <translation>(Nowe wyrażenie)</translation> |
| </message> |
| <message> |
| <source>%1[*] - Qt Linguist</source> |
| <translation>%1[*] - Qt Linguist</translation> |
| </message> |
| <message> |
| <source>Cannot save phrase book '%1'.</source> |
| <translation>Nie można zachować książki wyrażeń '%1'.</translation> |
| </message> |
| <message> |
| <source>Click here to add the phrase to the phrase book.</source> |
| <translation>Kliknij aby dodać wyrażenie do książki.</translation> |
| </message> |
| <message> |
| <source>&New Entry</source> |
| <translation>&Nowy wpis</translation> |
| </message> |
| <message> |
| <source>Click here to remove the entry from the phrase book.</source> |
| <translation>Kliknij tutaj aby usunąć wpis z książki.</translation> |
| </message> |
| <message> |
| <source>&Remove Entry</source> |
| <translation>&Usuń wpis</translation> |
| </message> |
| <message> |
| <source>Settin&gs...</source> |
| <translation>&Ustawienia...</translation> |
| </message> |
| <message> |
| <source>Click here to close this window.</source> |
| <translation>Kliknij tutaj aby zamknąć to okno.</translation> |
| </message> |
| <message> |
| <source>Click here to save the changes made.</source> |
| <translation>Kliknij tutaj aby zachować wprowadzone zmiany.</translation> |
| </message> |
| <message> |
| <source>Close</source> |
| <translation>Zamknij</translation> |
| </message> |
| <message> |
| <source>&Definition:</source> |
| <translation>&Definicja:</translation> |
| </message> |
| <message> |
| <source>Edit Phrase Book</source> |
| <translation>Edytuj książkę wyrażeń</translation> |
| </message> |
| <message> |
| <source>Qt Linguist</source> |
| <translation>Qt Linguist</translation> |
| </message> |
| <message> |
| <source>&Save</source> |
| <translation>&Zachowaj</translation> |
| </message> |
| <message> |
| <source>S&ource phrase:</source> |
| <translation>Wyrażenie źródł&owe:</translation> |
| </message> |
| <message> |
| <source>This window allows you to add, modify, or delete entries in a phrase book.</source> |
| <translation>To okno pozwala na dodawanie, modyfikowanie i usuwanie wpisów w książce.</translation> |
| </message> |
| <message> |
| <source>This is a definition for the source phrase.</source> |
| <translation>To jest definicja wyrażenia źródłowego.</translation> |
| </message> |
| <message> |
| <source>This is the phrase in the source language.</source> |
| <translation>To jest wyrażenie zapisane w języku źródłowym.</translation> |
| </message> |
| <message> |
| <source>This is the phrase in the target language corresponding to the source phrase.</source> |
| <translation>To jest wyrażenie w języku docelowym odpowiadające wyrażeniu w języku źródłowym.</translation> |
| </message> |
| <message> |
| <source>&Translation:</source> |
| <translation>&Tłumaczenie:</translation> |
| </message> |
| <message> |
| <source></source> |
| <comment>Go to Phrase > Edit Phrase Book... The dialog that pops up is a PhraseBookBox.</comment> |
| <translation></translation> |
| </message> |
| </context> |
| <context> |
| <name>PhraseModel</name> |
| <message> |
| <source>Definition</source> |
| <translation>Definicja</translation> |
| </message> |
| <message> |
| <source>Source phrase</source> |
| <translation>Wyrażenie źródłowe</translation> |
| </message> |
| <message> |
| <source>Translation</source> |
| <translation>Tłumaczenie</translation> |
| </message> |
| </context> |
| <context> |
| <name>PhraseView</name> |
| <message> |
| <source>Insert</source> |
| <translation>Wstaw</translation> |
| </message> |
| <message> |
| <source>Edit</source> |
| <translation>Edycja</translation> |
| </message> |
| <message> |
| <source>Guess (%1)</source> |
| <translation>Podpowiedź (%1)</translation> |
| </message> |
| <message> |
| <source>Guess</source> |
| <translation>Podpowiedź</translation> |
| </message> |
| </context> |
| <context> |
| <name>QObject</name> |
| <message> |
| <source>Translation files (%1);;</source> |
| <translation>Pliki z tłumaczeniami (%1);;</translation> |
| </message> |
| <message> |
| <source>All files (*)</source> |
| <translation>Wszystkie pliki (*)</translation> |
| </message> |
| <message> |
| <source>Qt Linguist</source> |
| <translation>Qt Linguist</translation> |
| </message> |
| </context> |
| <context> |
| <name>SourceCodeView</name> |
| <message> |
| <source><i>Source code not available</i></source> |
| <translation><i>Kod źródłowy nie jest dostępny</i></translation> |
| </message> |
| <message> |
| <source><i>File %1 not available</i></source> |
| <translation><i>Plik %1 nie jest dostępny</i></translation> |
| </message> |
| <message> |
| <source><i>File %1 not readable</i></source> |
| <translation><i>Nie można odczytać pliku %1</i></translation> |
| </message> |
| </context> |
| <context> |
| <name>Statistics</name> |
| <message> |
| <source>0</source> |
| <translation>0</translation> |
| </message> |
| <message> |
| <source>Characters:</source> |
| <translation>Znaków:</translation> |
| </message> |
| <message> |
| <source>Characters (with spaces):</source> |
| <translation>Znaków (ze spacjami):</translation> |
| </message> |
| <message> |
| <source>Source</source> |
| <translation>Źródło</translation> |
| </message> |
| <message> |
| <source>Statistics</source> |
| <translation>Statystyki</translation> |
| </message> |
| <message> |
| <source>Translation</source> |
| <translation>Tłumaczenie</translation> |
| </message> |
| <message> |
| <source>Words:</source> |
| <translation>Słów:</translation> |
| </message> |
| <message> |
| <source>Close</source> |
| <translation>Zamknij</translation> |
| </message> |
| </context> |
| <context> |
| <name>TrWindow</name> |
| <message> |
| <source></source> |
| <comment>This is the application's main window.</comment> |
| <translation></translation> |
| </message> |
| </context> |
| <context> |
| <name>TranslateDialog</name> |
| <message> |
| <source>Cancel</source> |
| <translation>Anuluj</translation> |
| </message> |
| <message> |
| <source>Click here to close this window.</source> |
| <translation>Kliknij tutaj aby zamknąć to okno.</translation> |
| </message> |
| <message> |
| <source>Click here to find the next occurrence of the text you typed in.</source> |
| <translation>Kliknij tutaj aby znaleźć następne wystąpienie wprowadzonego tekstu.</translation> |
| </message> |
| <message> |
| <source>Find Next</source> |
| <translation>Znajdź następny</translation> |
| </message> |
| <message> |
| <source>Find &source text:</source> |
| <translation>Szukaj tek&stu źródłowego:</translation> |
| </message> |
| <message> |
| <source>Mark new translation as &finished</source> |
| <translation>Zaznacz nowe tłumaczenie jako &zrobione</translation> |
| </message> |
| <message> |
| <source>Match &case</source> |
| <translation>Uwzględniaj &wielkość liter</translation> |
| </message> |
| <message> |
| <source>Search options</source> |
| <translation>Opcje szukania</translation> |
| </message> |
| <message> |
| <source>Texts such as 'TeX' and 'tex' are considered as different when checked.</source> |
| <translation>Jeśli zaznaczone, teksty 'TeX' oraz 'tex' są interpretowane jako różne.</translation> |
| </message> |
| <message> |
| <source>This window allows you to search for some text in the translation source file.</source> |
| <translation>To okno pozwala na szukanie tekstów w pliku źródłowym tłumaczenia.</translation> |
| </message> |
| <message> |
| <source>Translate</source> |
| <translation>Przetłumacz</translation> |
| </message> |
| <message> |
| <source>Translate All</source> |
| <translation>Przetłumacz wszystko</translation> |
| </message> |
| <message> |
| <source>&Translate to:</source> |
| <translation>Prze&tłumacz na:</translation> |
| </message> |
| <message> |
| <source>Type in the text to search for.</source> |
| <translation>Wprowadź tekst do wyszukania.</translation> |
| </message> |
| </context> |
| <context> |
| <name>TranslationSettingsDialog</name> |
| <message> |
| <source>Any Country</source> |
| <translation>Dowolny kraj</translation> |
| </message> |
| <message> |
| <source>Settings for '%1' - Qt Linguist</source> |
| <translation>Ustawienia dla '%1' - Qt Linguist</translation> |
| </message> |
| <message> |
| <source>Source language</source> |
| <translation>Język źródłowy</translation> |
| </message> |
| <message> |
| <source>Language</source> |
| <translation>Język</translation> |
| </message> |
| <message> |
| <source>Country/Region</source> |
| <translation>Kraj/Region</translation> |
| </message> |
| <message> |
| <source>Target language</source> |
| <translation>Język docelowy</translation> |
| </message> |
| </context> |
| </TS> |