| /* | |
| * AC-3 Audio Decoder | |
| * This code was developed as part of Google Summer of Code 2006. | |
| * E-AC-3 support was added as part of Google Summer of Code 2007. | |
| * | |
| * Copyright (c) 2006 Kartikey Mahendra BHATT (bhattkm at gmail dot com) | |
| * Copyright (c) 2007-2008 Bartlomiej Wolowiec <bartek.wolowiec@gmail.com> | |
| * Copyright (c) 2007 Justin Ruggles <justin.ruggles@gmail.com> | |
| * | |
| * This file is part of FFmpeg. | |
| * | |
| * FFmpeg is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU Lesser General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2.1 of the License, or (at your option) any later version. | |
| * | |
| * FFmpeg is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * Lesser General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU Lesser General Public | |
| * License along with FFmpeg; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA | |
| */ | |
| #include "config_components.h" | |
| #include <stdio.h> | |
| #include <stddef.h> | |
| #include <math.h> | |
| #include <string.h> | |
| #include "libavutil/channel_layout.h" | |
| #include "libavutil/crc.h" | |
| #include "libavutil/downmix_info.h" | |
| #include "libavutil/intmath.h" | |
| #include "libavutil/opt.h" | |
| #include "libavutil/thread.h" | |
| #include "bswapdsp.h" | |
| #include "aac_ac3_parser.h" | |
| #include "ac3_parser_internal.h" | |
| #include "ac3dec.h" | |
| #include "ac3dec_data.h" | |
| #include "ac3defs.h" | |
| #include "decode.h" | |
| #include "kbdwin.h" | |
| /** | |
| * table for ungrouping 3 values in 7 bits. | |
| * used for exponents and bap=2 mantissas | |
| */ | |
| static uint8_t ungroup_3_in_7_bits_tab[128][3]; | |
| /** tables for ungrouping mantissas */ | |
| static int b1_mantissas[32][3]; | |
| static int b2_mantissas[128][3]; | |
| static int b3_mantissas[8]; | |
| static int b4_mantissas[128][2]; | |
| static int b5_mantissas[16]; | |
| /** | |
| * Quantization table: levels for symmetric. bits for asymmetric. | |
| * reference: Table 7.18 Mapping of bap to Quantizer | |
| */ | |
| static const uint8_t quantization_tab[16] = { | |
| 0, 3, 5, 7, 11, 15, | |
| 5, 6, 7, 8, 9, 10, 11, 12, 14, 16 | |
| }; | |
| #if (!USE_FIXED) | |
| /** dynamic range table. converts codes to scale factors. */ | |
| static float dynamic_range_tab[256]; | |
| float ff_ac3_heavy_dynamic_range_tab[256]; | |
| #endif | |
| /** Adjustments in dB gain */ | |
| static const float gain_levels[9] = { | |
| LEVEL_PLUS_3DB, | |
| LEVEL_PLUS_1POINT5DB, | |
| LEVEL_ONE, | |
| LEVEL_MINUS_1POINT5DB, | |
| LEVEL_MINUS_3DB, | |
| LEVEL_MINUS_4POINT5DB, | |
| LEVEL_MINUS_6DB, | |
| LEVEL_ZERO, | |
| LEVEL_MINUS_9DB | |
| }; | |
| /** Adjustments in dB gain (LFE, +10 to -21 dB) */ | |
| static const float gain_levels_lfe[32] = { | |
| 3.162275, 2.818382, 2.511886, 2.238719, 1.995261, 1.778278, 1.584893, | |
| 1.412536, 1.258924, 1.122018, 1.000000, 0.891251, 0.794328, 0.707946, | |
| 0.630957, 0.562341, 0.501187, 0.446683, 0.398107, 0.354813, 0.316227, | |
| 0.281838, 0.251188, 0.223872, 0.199526, 0.177828, 0.158489, 0.141253, | |
| 0.125892, 0.112201, 0.100000, 0.089125 | |
| }; | |
| /** | |
| * Table for default stereo downmixing coefficients | |
| * reference: Section 7.8.2 Downmixing Into Two Channels | |
| */ | |
| static const uint8_t ac3_default_coeffs[8][5][2] = { | |
| { { 2, 7 }, { 7, 2 }, }, | |
| { { 4, 4 }, }, | |
| { { 2, 7 }, { 7, 2 }, }, | |
| { { 2, 7 }, { 5, 5 }, { 7, 2 }, }, | |
| { { 2, 7 }, { 7, 2 }, { 6, 6 }, }, | |
| { { 2, 7 }, { 5, 5 }, { 7, 2 }, { 8, 8 }, }, | |
| { { 2, 7 }, { 7, 2 }, { 6, 7 }, { 7, 6 }, }, | |
| { { 2, 7 }, { 5, 5 }, { 7, 2 }, { 6, 7 }, { 7, 6 }, }, | |
| }; | |
| /** | |
| * Symmetrical Dequantization | |
| * reference: Section 7.3.3 Expansion of Mantissas for Symmetrical Quantization | |
| * Tables 7.19 to 7.23 | |
| */ | |
| static inline int | |
| symmetric_dequant(int code, int levels) | |
| { | |
| return ((code - (levels >> 1)) * (1 << 24)) / levels; | |
| } | |
| /* | |
| * Initialize tables at runtime. | |
| */ | |
| static av_cold void ac3_tables_init(void) | |
| { | |
| int i; | |
| /* generate table for ungrouping 3 values in 7 bits | |
| reference: Section 7.1.3 Exponent Decoding */ | |
| for (i = 0; i < 128; i++) { | |
| ungroup_3_in_7_bits_tab[i][0] = i / 25; | |
| ungroup_3_in_7_bits_tab[i][1] = (i % 25) / 5; | |
| ungroup_3_in_7_bits_tab[i][2] = (i % 25) % 5; | |
| } | |
| /* generate grouped mantissa tables | |
| reference: Section 7.3.5 Ungrouping of Mantissas */ | |
| for (i = 0; i < 32; i++) { | |
| /* bap=1 mantissas */ | |
| b1_mantissas[i][0] = symmetric_dequant(ff_ac3_ungroup_3_in_5_bits_tab[i][0], 3); | |
| b1_mantissas[i][1] = symmetric_dequant(ff_ac3_ungroup_3_in_5_bits_tab[i][1], 3); | |
| b1_mantissas[i][2] = symmetric_dequant(ff_ac3_ungroup_3_in_5_bits_tab[i][2], 3); | |
| } | |
| for (i = 0; i < 128; i++) { | |
| /* bap=2 mantissas */ | |
| b2_mantissas[i][0] = symmetric_dequant(ungroup_3_in_7_bits_tab[i][0], 5); | |
| b2_mantissas[i][1] = symmetric_dequant(ungroup_3_in_7_bits_tab[i][1], 5); | |
| b2_mantissas[i][2] = symmetric_dequant(ungroup_3_in_7_bits_tab[i][2], 5); | |
| /* bap=4 mantissas */ | |
| b4_mantissas[i][0] = symmetric_dequant(i / 11, 11); | |
| b4_mantissas[i][1] = symmetric_dequant(i % 11, 11); | |
| } | |
| /* generate ungrouped mantissa tables | |
| reference: Tables 7.21 and 7.23 */ | |
| for (i = 0; i < 7; i++) { | |
| /* bap=3 mantissas */ | |
| b3_mantissas[i] = symmetric_dequant(i, 7); | |
| } | |
| for (i = 0; i < 15; i++) { | |
| /* bap=5 mantissas */ | |
| b5_mantissas[i] = symmetric_dequant(i, 15); | |
| } | |
| #if (!USE_FIXED) | |
| /* generate dynamic range table | |
| reference: Section 7.7.1 Dynamic Range Control */ | |
| for (i = 0; i < 256; i++) { | |
| int v = (i >> 5) - ((i >> 7) << 3) - 5; | |
| dynamic_range_tab[i] = powf(2.0f, v) * ((i & 0x1F) | 0x20); | |
| } | |
| /* generate compr dynamic range table | |
| reference: Section 7.7.2 Heavy Compression */ | |
| for (i = 0; i < 256; i++) { | |
| int v = (i >> 4) - ((i >> 7) << 4) - 4; | |
| ff_ac3_heavy_dynamic_range_tab[i] = powf(2.0f, v) * ((i & 0xF) | 0x10); | |
| } | |
| #endif | |
| } | |
| static void ac3_downmix(AVCodecContext *avctx) | |
| { | |
| AC3DecodeContext *s = avctx->priv_data; | |
| const AVChannelLayout mono = (AVChannelLayout)AV_CHANNEL_LAYOUT_MONO; | |
| const AVChannelLayout stereo = (AVChannelLayout)AV_CHANNEL_LAYOUT_STEREO; | |
| /* allow downmixing to stereo or mono */ | |
| if (avctx->ch_layout.nb_channels > 1 && | |
| !av_channel_layout_compare(&s->downmix_layout, &mono)) { | |
| av_channel_layout_uninit(&avctx->ch_layout); | |
| avctx->ch_layout = (AVChannelLayout)AV_CHANNEL_LAYOUT_MONO; | |
| } else if (avctx->ch_layout.nb_channels > 2 && | |
| !av_channel_layout_compare(&s->downmix_layout, &stereo)) { | |
| av_channel_layout_uninit(&avctx->ch_layout); | |
| avctx->ch_layout = (AVChannelLayout)AV_CHANNEL_LAYOUT_STEREO; | |
| } | |
| s->downmixed = 1; | |
| } | |
| /** | |
| * AVCodec initialization | |
| */ | |
| static av_cold int ac3_decode_init(AVCodecContext *avctx) | |
| { | |
| static AVOnce init_static_once = AV_ONCE_INIT; | |
| AC3DecodeContext *s = avctx->priv_data; | |
| const float scale = 1.0f; | |
| int i, ret; | |
| s->avctx = avctx; | |
| if ((ret = av_tx_init(&s->tx_128, &s->tx_fn_128, IMDCT_TYPE, 1, 128, &scale, 0))) | |
| return ret; | |
| if ((ret = av_tx_init(&s->tx_256, &s->tx_fn_256, IMDCT_TYPE, 1, 256, &scale, 0))) | |
| return ret; | |
| AC3_RENAME(ff_kbd_window_init)(s->window, 5.0, 256); | |
| ff_bswapdsp_init(&s->bdsp); | |
| #if (USE_FIXED) | |
| s->fdsp = avpriv_alloc_fixed_dsp(avctx->flags & AV_CODEC_FLAG_BITEXACT); | |
| #else | |
| ff_fmt_convert_init(&s->fmt_conv); | |
| s->fdsp = avpriv_float_dsp_alloc(avctx->flags & AV_CODEC_FLAG_BITEXACT); | |
| #endif | |
| if (!s->fdsp) | |
| return AVERROR(ENOMEM); | |
| ff_ac3dsp_init(&s->ac3dsp); | |
| av_lfg_init(&s->dith_state, 0); | |
| if (USE_FIXED) | |
| avctx->sample_fmt = AV_SAMPLE_FMT_S16P; | |
| else | |
| avctx->sample_fmt = AV_SAMPLE_FMT_FLTP; | |
| ac3_downmix(avctx); | |
| for (i = 0; i < AC3_MAX_CHANNELS; i++) { | |
| s->xcfptr[i] = s->transform_coeffs[i]; | |
| s->dlyptr[i] = s->delay[i]; | |
| } | |
| ff_thread_once(&init_static_once, ac3_tables_init); | |
| return 0; | |
| } | |
| /** | |
| * Parse the 'sync info' and 'bit stream info' from the AC-3 bitstream. | |
| * GetBitContext within AC3DecodeContext must point to | |
| * the start of the synchronized AC-3 bitstream. | |
| */ | |
| static int ac3_parse_header(AC3DecodeContext *s) | |
| { | |
| GetBitContext *gbc = &s->gbc; | |
| int i; | |
| /* read the rest of the bsi. read twice for dual mono mode. */ | |
| i = !s->channel_mode; | |
| do { | |
| s->dialog_normalization[(!s->channel_mode)-i] = -get_bits(gbc, 5); | |
| if (s->dialog_normalization[(!s->channel_mode)-i] == 0) { | |
| s->dialog_normalization[(!s->channel_mode)-i] = -31; | |
| } | |
| if (s->target_level != 0) { | |
| s->level_gain[(!s->channel_mode)-i] = powf(2.0f, | |
| (float)(s->target_level - | |
| s->dialog_normalization[(!s->channel_mode)-i])/6.0f); | |
| } | |
| if (s->compression_exists[(!s->channel_mode)-i] = get_bits1(gbc)) { | |
| s->heavy_dynamic_range[(!s->channel_mode)-i] = | |
| AC3_HEAVY_RANGE(get_bits(gbc, 8)); | |
| } | |
| if (get_bits1(gbc)) | |
| skip_bits(gbc, 8); //skip language code | |
| if (get_bits1(gbc)) | |
| skip_bits(gbc, 7); //skip audio production information | |
| } while (i--); | |
| skip_bits(gbc, 2); //skip copyright bit and original bitstream bit | |
| /* skip the timecodes or parse the Alternate Bit Stream Syntax */ | |
| if (s->bitstream_id != 6) { | |
| if (get_bits1(gbc)) | |
| skip_bits(gbc, 14); //skip timecode1 | |
| if (get_bits1(gbc)) | |
| skip_bits(gbc, 14); //skip timecode2 | |
| } else { | |
| if (get_bits1(gbc)) { | |
| s->preferred_downmix = get_bits(gbc, 2); | |
| s->center_mix_level_ltrt = get_bits(gbc, 3); | |
| s->surround_mix_level_ltrt = av_clip(get_bits(gbc, 3), 3, 7); | |
| s->center_mix_level = get_bits(gbc, 3); | |
| s->surround_mix_level = av_clip(get_bits(gbc, 3), 3, 7); | |
| } | |
| if (get_bits1(gbc)) { | |
| s->dolby_surround_ex_mode = get_bits(gbc, 2); | |
| s->dolby_headphone_mode = get_bits(gbc, 2); | |
| skip_bits(gbc, 10); // skip adconvtyp (1), xbsi2 (8), encinfo (1) | |
| } | |
| } | |
| /* skip additional bitstream info */ | |
| if (get_bits1(gbc)) { | |
| i = get_bits(gbc, 6); | |
| do { | |
| skip_bits(gbc, 8); | |
| } while (i--); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * Common function to parse AC-3 or E-AC-3 frame header | |
| */ | |
| static int parse_frame_header(AC3DecodeContext *s) | |
| { | |
| AC3HeaderInfo hdr; | |
| int err; | |
| err = ff_ac3_parse_header(&s->gbc, &hdr); | |
| if (err) | |
| return err; | |
| /* get decoding parameters from header info */ | |
| s->bit_alloc_params.sr_code = hdr.sr_code; | |
| s->bitstream_id = hdr.bitstream_id; | |
| s->bitstream_mode = hdr.bitstream_mode; | |
| s->channel_mode = hdr.channel_mode; | |
| s->lfe_on = hdr.lfe_on; | |
| s->bit_alloc_params.sr_shift = hdr.sr_shift; | |
| s->sample_rate = hdr.sample_rate; | |
| s->bit_rate = hdr.bit_rate; | |
| s->channels = hdr.channels; | |
| s->fbw_channels = s->channels - s->lfe_on; | |
| s->lfe_ch = s->fbw_channels + 1; | |
| s->frame_size = hdr.frame_size; | |
| s->superframe_size += hdr.frame_size; | |
| s->preferred_downmix = AC3_DMIXMOD_NOTINDICATED; | |
| s->center_mix_level = hdr.center_mix_level; | |
| s->center_mix_level_ltrt = 4; // -3.0dB | |
| s->surround_mix_level = hdr.surround_mix_level; | |
| s->surround_mix_level_ltrt = 4; // -3.0dB | |
| s->lfe_mix_level_exists = 0; | |
| s->num_blocks = hdr.num_blocks; | |
| s->frame_type = hdr.frame_type; | |
| s->substreamid = hdr.substreamid; | |
| s->dolby_surround_mode = hdr.dolby_surround_mode; | |
| s->dolby_surround_ex_mode = AC3_DSUREXMOD_NOTINDICATED; | |
| s->dolby_headphone_mode = AC3_DHEADPHONMOD_NOTINDICATED; | |
| if (s->lfe_on) { | |
| s->start_freq[s->lfe_ch] = 0; | |
| s->end_freq[s->lfe_ch] = 7; | |
| s->num_exp_groups[s->lfe_ch] = 2; | |
| s->channel_in_cpl[s->lfe_ch] = 0; | |
| } | |
| if (s->bitstream_id <= 10) { | |
| s->eac3 = 0; | |
| s->snr_offset_strategy = 2; | |
| s->block_switch_syntax = 1; | |
| s->dither_flag_syntax = 1; | |
| s->bit_allocation_syntax = 1; | |
| s->fast_gain_syntax = 0; | |
| s->first_cpl_leak = 0; | |
| s->dba_syntax = 1; | |
| s->skip_syntax = 1; | |
| memset(s->channel_uses_aht, 0, sizeof(s->channel_uses_aht)); | |
| return ac3_parse_header(s); | |
| } else if (CONFIG_EAC3_DECODER) { | |
| s->eac3 = 1; | |
| return ff_eac3_parse_header(s); | |
| } else { | |
| av_log(s->avctx, AV_LOG_ERROR, "E-AC-3 support not compiled in\n"); | |
| return AVERROR(ENOSYS); | |
| } | |
| } | |
| /** | |
| * Set stereo downmixing coefficients based on frame header info. | |
| * reference: Section 7.8.2 Downmixing Into Two Channels | |
| */ | |
| static int set_downmix_coeffs(AC3DecodeContext *s) | |
| { | |
| int i; | |
| float cmix = gain_levels[s-> center_mix_level]; | |
| float smix = gain_levels[s->surround_mix_level]; | |
| float norm0, norm1; | |
| float downmix_coeffs[2][AC3_MAX_CHANNELS]; | |
| if (!s->downmix_coeffs[0]) { | |
| s->downmix_coeffs[0] = av_malloc_array(2 * AC3_MAX_CHANNELS, | |
| sizeof(**s->downmix_coeffs)); | |
| if (!s->downmix_coeffs[0]) | |
| return AVERROR(ENOMEM); | |
| s->downmix_coeffs[1] = s->downmix_coeffs[0] + AC3_MAX_CHANNELS; | |
| } | |
| for (i = 0; i < s->fbw_channels; i++) { | |
| downmix_coeffs[0][i] = gain_levels[ac3_default_coeffs[s->channel_mode][i][0]]; | |
| downmix_coeffs[1][i] = gain_levels[ac3_default_coeffs[s->channel_mode][i][1]]; | |
| } | |
| if (s->channel_mode > 1 && s->channel_mode & 1) { | |
| downmix_coeffs[0][1] = downmix_coeffs[1][1] = cmix; | |
| } | |
| if (s->channel_mode == AC3_CHMODE_2F1R || s->channel_mode == AC3_CHMODE_3F1R) { | |
| int nf = s->channel_mode - 2; | |
| downmix_coeffs[0][nf] = downmix_coeffs[1][nf] = smix * LEVEL_MINUS_3DB; | |
| } | |
| if (s->channel_mode == AC3_CHMODE_2F2R || s->channel_mode == AC3_CHMODE_3F2R) { | |
| int nf = s->channel_mode - 4; | |
| downmix_coeffs[0][nf] = downmix_coeffs[1][nf+1] = smix; | |
| } | |
| /* renormalize */ | |
| norm0 = norm1 = 0.0; | |
| for (i = 0; i < s->fbw_channels; i++) { | |
| norm0 += downmix_coeffs[0][i]; | |
| norm1 += downmix_coeffs[1][i]; | |
| } | |
| norm0 = 1.0f / norm0; | |
| norm1 = 1.0f / norm1; | |
| for (i = 0; i < s->fbw_channels; i++) { | |
| downmix_coeffs[0][i] *= norm0; | |
| downmix_coeffs[1][i] *= norm1; | |
| } | |
| if (s->output_mode == AC3_CHMODE_MONO) { | |
| for (i = 0; i < s->fbw_channels; i++) | |
| downmix_coeffs[0][i] = (downmix_coeffs[0][i] + | |
| downmix_coeffs[1][i]) * LEVEL_MINUS_3DB; | |
| } | |
| for (i = 0; i < s->fbw_channels; i++) { | |
| s->downmix_coeffs[0][i] = FIXR12(downmix_coeffs[0][i]); | |
| s->downmix_coeffs[1][i] = FIXR12(downmix_coeffs[1][i]); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * Decode the grouped exponents according to exponent strategy. | |
| * reference: Section 7.1.3 Exponent Decoding | |
| */ | |
| static int decode_exponents(AC3DecodeContext *s, | |
| GetBitContext *gbc, int exp_strategy, int ngrps, | |
| uint8_t absexp, int8_t *dexps) | |
| { | |
| int i, j, grp, group_size; | |
| int dexp[256]; | |
| int expacc, prevexp; | |
| /* unpack groups */ | |
| group_size = exp_strategy + (exp_strategy == EXP_D45); | |
| for (grp = 0, i = 0; grp < ngrps; grp++) { | |
| expacc = get_bits(gbc, 7); | |
| if (expacc >= 125) { | |
| av_log(s->avctx, AV_LOG_ERROR, "expacc %d is out-of-range\n", expacc); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| dexp[i++] = ungroup_3_in_7_bits_tab[expacc][0]; | |
| dexp[i++] = ungroup_3_in_7_bits_tab[expacc][1]; | |
| dexp[i++] = ungroup_3_in_7_bits_tab[expacc][2]; | |
| } | |
| /* convert to absolute exps and expand groups */ | |
| prevexp = absexp; | |
| for (i = 0, j = 0; i < ngrps * 3; i++) { | |
| prevexp += dexp[i] - 2; | |
| if (prevexp > 24U) { | |
| av_log(s->avctx, AV_LOG_ERROR, "exponent %d is out-of-range\n", prevexp); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| switch (group_size) { | |
| case 4: dexps[j++] = prevexp; | |
| dexps[j++] = prevexp; | |
| case 2: dexps[j++] = prevexp; | |
| case 1: dexps[j++] = prevexp; | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * Generate transform coefficients for each coupled channel in the coupling | |
| * range using the coupling coefficients and coupling coordinates. | |
| * reference: Section 7.4.3 Coupling Coordinate Format | |
| */ | |
| static void calc_transform_coeffs_cpl(AC3DecodeContext *s) | |
| { | |
| int bin, band, ch; | |
| bin = s->start_freq[CPL_CH]; | |
| for (band = 0; band < s->num_cpl_bands; band++) { | |
| int band_start = bin; | |
| int band_end = bin + s->cpl_band_sizes[band]; | |
| for (ch = 1; ch <= s->fbw_channels; ch++) { | |
| if (s->channel_in_cpl[ch]) { | |
| int cpl_coord = s->cpl_coords[ch][band] << 5; | |
| for (bin = band_start; bin < band_end; bin++) { | |
| s->fixed_coeffs[ch][bin] = | |
| MULH(s->fixed_coeffs[CPL_CH][bin] * (1 << 4), cpl_coord); | |
| } | |
| if (ch == 2 && s->phase_flags[band]) { | |
| for (bin = band_start; bin < band_end; bin++) | |
| s->fixed_coeffs[2][bin] = -s->fixed_coeffs[2][bin]; | |
| } | |
| } | |
| } | |
| bin = band_end; | |
| } | |
| } | |
| /** | |
| * Grouped mantissas for 3-level 5-level and 11-level quantization | |
| */ | |
| typedef struct mant_groups { | |
| int b1_mant[2]; | |
| int b2_mant[2]; | |
| int b4_mant; | |
| int b1; | |
| int b2; | |
| int b4; | |
| } mant_groups; | |
| /** | |
| * Decode the transform coefficients for a particular channel | |
| * reference: Section 7.3 Quantization and Decoding of Mantissas | |
| */ | |
| static void ac3_decode_transform_coeffs_ch(AC3DecodeContext *s, int ch_index, mant_groups *m) | |
| { | |
| int start_freq = s->start_freq[ch_index]; | |
| int end_freq = s->end_freq[ch_index]; | |
| uint8_t *baps = s->bap[ch_index]; | |
| int8_t *exps = s->dexps[ch_index]; | |
| int32_t *coeffs = s->fixed_coeffs[ch_index]; | |
| int dither = (ch_index == CPL_CH) || s->dither_flag[ch_index]; | |
| GetBitContext *gbc = &s->gbc; | |
| int freq; | |
| for (freq = start_freq; freq < end_freq; freq++) { | |
| int bap = baps[freq]; | |
| int mantissa; | |
| switch (bap) { | |
| case 0: | |
| /* random noise with approximate range of -0.707 to 0.707 */ | |
| if (dither) | |
| mantissa = (((av_lfg_get(&s->dith_state)>>8)*181)>>8) - 5931008; | |
| else | |
| mantissa = 0; | |
| break; | |
| case 1: | |
| if (m->b1) { | |
| m->b1--; | |
| mantissa = m->b1_mant[m->b1]; | |
| } else { | |
| int bits = get_bits(gbc, 5); | |
| mantissa = b1_mantissas[bits][0]; | |
| m->b1_mant[1] = b1_mantissas[bits][1]; | |
| m->b1_mant[0] = b1_mantissas[bits][2]; | |
| m->b1 = 2; | |
| } | |
| break; | |
| case 2: | |
| if (m->b2) { | |
| m->b2--; | |
| mantissa = m->b2_mant[m->b2]; | |
| } else { | |
| int bits = get_bits(gbc, 7); | |
| mantissa = b2_mantissas[bits][0]; | |
| m->b2_mant[1] = b2_mantissas[bits][1]; | |
| m->b2_mant[0] = b2_mantissas[bits][2]; | |
| m->b2 = 2; | |
| } | |
| break; | |
| case 3: | |
| mantissa = b3_mantissas[get_bits(gbc, 3)]; | |
| break; | |
| case 4: | |
| if (m->b4) { | |
| m->b4 = 0; | |
| mantissa = m->b4_mant; | |
| } else { | |
| int bits = get_bits(gbc, 7); | |
| mantissa = b4_mantissas[bits][0]; | |
| m->b4_mant = b4_mantissas[bits][1]; | |
| m->b4 = 1; | |
| } | |
| break; | |
| case 5: | |
| mantissa = b5_mantissas[get_bits(gbc, 4)]; | |
| break; | |
| default: /* 6 to 15 */ | |
| /* Shift mantissa and sign-extend it. */ | |
| if (bap > 15) { | |
| av_log(s->avctx, AV_LOG_ERROR, "bap %d is invalid in plain AC-3\n", bap); | |
| bap = 15; | |
| } | |
| mantissa = (unsigned)get_sbits(gbc, quantization_tab[bap]) << (24 - quantization_tab[bap]); | |
| break; | |
| } | |
| coeffs[freq] = mantissa >> exps[freq]; | |
| } | |
| } | |
| /** | |
| * Remove random dithering from coupling range coefficients with zero-bit | |
| * mantissas for coupled channels which do not use dithering. | |
| * reference: Section 7.3.4 Dither for Zero Bit Mantissas (bap=0) | |
| */ | |
| static void remove_dithering(AC3DecodeContext *s) { | |
| int ch, i; | |
| for (ch = 1; ch <= s->fbw_channels; ch++) { | |
| if (!s->dither_flag[ch] && s->channel_in_cpl[ch]) { | |
| for (i = s->start_freq[CPL_CH]; i < s->end_freq[CPL_CH]; i++) { | |
| if (!s->bap[CPL_CH][i]) | |
| s->fixed_coeffs[ch][i] = 0; | |
| } | |
| } | |
| } | |
| } | |
| static inline void decode_transform_coeffs_ch(AC3DecodeContext *s, int blk, | |
| int ch, mant_groups *m) | |
| { | |
| if (!s->channel_uses_aht[ch]) { | |
| ac3_decode_transform_coeffs_ch(s, ch, m); | |
| } else { | |
| /* if AHT is used, mantissas for all blocks are encoded in the first | |
| block of the frame. */ | |
| int bin; | |
| if (CONFIG_EAC3_DECODER && !blk) | |
| ff_eac3_decode_transform_coeffs_aht_ch(s, ch); | |
| for (bin = s->start_freq[ch]; bin < s->end_freq[ch]; bin++) { | |
| s->fixed_coeffs[ch][bin] = s->pre_mantissa[ch][bin][blk] >> s->dexps[ch][bin]; | |
| } | |
| } | |
| } | |
| /** | |
| * Decode the transform coefficients. | |
| */ | |
| static inline void decode_transform_coeffs(AC3DecodeContext *s, int blk) | |
| { | |
| int ch, end; | |
| int got_cplchan = 0; | |
| mant_groups m; | |
| m.b1 = m.b2 = m.b4 = 0; | |
| for (ch = 1; ch <= s->channels; ch++) { | |
| /* transform coefficients for full-bandwidth channel */ | |
| decode_transform_coeffs_ch(s, blk, ch, &m); | |
| /* transform coefficients for coupling channel come right after the | |
| coefficients for the first coupled channel*/ | |
| if (s->channel_in_cpl[ch]) { | |
| if (!got_cplchan) { | |
| decode_transform_coeffs_ch(s, blk, CPL_CH, &m); | |
| calc_transform_coeffs_cpl(s); | |
| got_cplchan = 1; | |
| } | |
| end = s->end_freq[CPL_CH]; | |
| } else { | |
| end = s->end_freq[ch]; | |
| } | |
| do | |
| s->fixed_coeffs[ch][end] = 0; | |
| while (++end < 256); | |
| } | |
| /* zero the dithered coefficients for appropriate channels */ | |
| remove_dithering(s); | |
| } | |
| /** | |
| * Stereo rematrixing. | |
| * reference: Section 7.5.4 Rematrixing : Decoding Technique | |
| */ | |
| static void do_rematrixing(AC3DecodeContext *s) | |
| { | |
| int bnd, i; | |
| int end, bndend; | |
| end = FFMIN(s->end_freq[1], s->end_freq[2]); | |
| for (bnd = 0; bnd < s->num_rematrixing_bands; bnd++) { | |
| if (s->rematrixing_flags[bnd]) { | |
| bndend = FFMIN(end, ff_ac3_rematrix_band_tab[bnd + 1]); | |
| for (i = ff_ac3_rematrix_band_tab[bnd]; i < bndend; i++) { | |
| int tmp0 = s->fixed_coeffs[1][i]; | |
| s->fixed_coeffs[1][i] += s->fixed_coeffs[2][i]; | |
| s->fixed_coeffs[2][i] = tmp0 - s->fixed_coeffs[2][i]; | |
| } | |
| } | |
| } | |
| } | |
| /** | |
| * Inverse MDCT Transform. | |
| * Convert frequency domain coefficients to time-domain audio samples. | |
| * reference: Section 7.9.4 Transformation Equations | |
| */ | |
| static inline void do_imdct(AC3DecodeContext *s, int channels, int offset) | |
| { | |
| int ch; | |
| for (ch = 1; ch <= channels; ch++) { | |
| if (s->block_switch[ch]) { | |
| int i; | |
| INTFLOAT *x = s->tmp_output + 128; | |
| for (i = 0; i < 128; i++) | |
| x[i] = s->transform_coeffs[ch][2 * i]; | |
| s->tx_fn_128(s->tx_128, s->tmp_output, x, sizeof(INTFLOAT)); | |
| #if USE_FIXED | |
| s->fdsp->vector_fmul_window_scaled(s->outptr[ch - 1], s->delay[ch - 1 + offset], | |
| s->tmp_output, s->window, 128, 8); | |
| #else | |
| s->fdsp->vector_fmul_window(s->outptr[ch - 1], s->delay[ch - 1 + offset], | |
| s->tmp_output, s->window, 128); | |
| #endif | |
| for (i = 0; i < 128; i++) | |
| x[i] = s->transform_coeffs[ch][2 * i + 1]; | |
| s->tx_fn_128(s->tx_128, s->delay[ch - 1 + offset], x, sizeof(INTFLOAT)); | |
| } else { | |
| s->tx_fn_256(s->tx_256, s->tmp_output, s->transform_coeffs[ch], sizeof(INTFLOAT)); | |
| #if USE_FIXED | |
| s->fdsp->vector_fmul_window_scaled(s->outptr[ch - 1], s->delay[ch - 1 + offset], | |
| s->tmp_output, s->window, 128, 8); | |
| #else | |
| s->fdsp->vector_fmul_window(s->outptr[ch - 1], s->delay[ch - 1 + offset], | |
| s->tmp_output, s->window, 128); | |
| #endif | |
| memcpy(s->delay[ch - 1 + offset], s->tmp_output + 128, 128 * sizeof(INTFLOAT)); | |
| } | |
| } | |
| } | |
| /** | |
| * Upmix delay samples from stereo to original channel layout. | |
| */ | |
| static void ac3_upmix_delay(AC3DecodeContext *s) | |
| { | |
| int channel_data_size = sizeof(s->delay[0]); | |
| switch (s->channel_mode) { | |
| case AC3_CHMODE_DUALMONO: | |
| case AC3_CHMODE_STEREO: | |
| /* upmix mono to stereo */ | |
| memcpy(s->delay[1], s->delay[0], channel_data_size); | |
| break; | |
| case AC3_CHMODE_2F2R: | |
| memset(s->delay[3], 0, channel_data_size); | |
| case AC3_CHMODE_2F1R: | |
| memset(s->delay[2], 0, channel_data_size); | |
| break; | |
| case AC3_CHMODE_3F2R: | |
| memset(s->delay[4], 0, channel_data_size); | |
| case AC3_CHMODE_3F1R: | |
| memset(s->delay[3], 0, channel_data_size); | |
| case AC3_CHMODE_3F: | |
| memcpy(s->delay[2], s->delay[1], channel_data_size); | |
| memset(s->delay[1], 0, channel_data_size); | |
| break; | |
| } | |
| } | |
| /** | |
| * Decode band structure for coupling, spectral extension, or enhanced coupling. | |
| * The band structure defines how many subbands are in each band. For each | |
| * subband in the range, 1 means it is combined with the previous band, and 0 | |
| * means that it starts a new band. | |
| * | |
| * @param[in] gbc bit reader context | |
| * @param[in] blk block number | |
| * @param[in] eac3 flag to indicate E-AC-3 | |
| * @param[in] ecpl flag to indicate enhanced coupling | |
| * @param[in] start_subband subband number for start of range | |
| * @param[in] end_subband subband number for end of range | |
| * @param[in] default_band_struct default band structure table | |
| * @param[out] num_bands number of bands (optionally NULL) | |
| * @param[out] band_sizes array containing the number of bins in each band (optionally NULL) | |
| * @param[in,out] band_struct current band structure | |
| */ | |
| static void decode_band_structure(GetBitContext *gbc, int blk, int eac3, | |
| int ecpl, int start_subband, int end_subband, | |
| const uint8_t *default_band_struct, | |
| int *num_bands, uint8_t *band_sizes, | |
| uint8_t *band_struct, int band_struct_size) | |
| { | |
| int subbnd, bnd, n_subbands, n_bands=0; | |
| uint8_t bnd_sz[22]; | |
| n_subbands = end_subband - start_subband; | |
| if (!blk) | |
| memcpy(band_struct, default_band_struct, band_struct_size); | |
| av_assert0(band_struct_size >= start_subband + n_subbands); | |
| band_struct += start_subband + 1; | |
| /* decode band structure from bitstream or use default */ | |
| if (!eac3 || get_bits1(gbc)) { | |
| for (subbnd = 0; subbnd < n_subbands - 1; subbnd++) { | |
| band_struct[subbnd] = get_bits1(gbc); | |
| } | |
| } | |
| /* calculate number of bands and band sizes based on band structure. | |
| note that the first 4 subbands in enhanced coupling span only 6 bins | |
| instead of 12. */ | |
| if (num_bands || band_sizes ) { | |
| n_bands = n_subbands; | |
| bnd_sz[0] = ecpl ? 6 : 12; | |
| for (bnd = 0, subbnd = 1; subbnd < n_subbands; subbnd++) { | |
| int subbnd_size = (ecpl && subbnd < 4) ? 6 : 12; | |
| if (band_struct[subbnd - 1]) { | |
| n_bands--; | |
| bnd_sz[bnd] += subbnd_size; | |
| } else { | |
| bnd_sz[++bnd] = subbnd_size; | |
| } | |
| } | |
| } | |
| /* set optional output params */ | |
| if (num_bands) | |
| *num_bands = n_bands; | |
| if (band_sizes) | |
| memcpy(band_sizes, bnd_sz, n_bands); | |
| } | |
| static inline int spx_strategy(AC3DecodeContext *s, int blk) | |
| { | |
| GetBitContext *bc = &s->gbc; | |
| int fbw_channels = s->fbw_channels; | |
| int dst_start_freq, dst_end_freq, src_start_freq, | |
| start_subband, end_subband, ch; | |
| /* determine which channels use spx */ | |
| if (s->channel_mode == AC3_CHMODE_MONO) { | |
| s->channel_uses_spx[1] = 1; | |
| } else { | |
| for (ch = 1; ch <= fbw_channels; ch++) | |
| s->channel_uses_spx[ch] = get_bits1(bc); | |
| } | |
| /* get the frequency bins of the spx copy region and the spx start | |
| and end subbands */ | |
| dst_start_freq = get_bits(bc, 2); | |
| start_subband = get_bits(bc, 3) + 2; | |
| if (start_subband > 7) | |
| start_subband += start_subband - 7; | |
| end_subband = get_bits(bc, 3) + 5; | |
| #if USE_FIXED | |
| s->spx_dst_end_freq = end_freq_inv_tab[end_subband-5]; | |
| #endif | |
| if (end_subband > 7) | |
| end_subband += end_subband - 7; | |
| dst_start_freq = dst_start_freq * 12 + 25; | |
| src_start_freq = start_subband * 12 + 25; | |
| dst_end_freq = end_subband * 12 + 25; | |
| /* check validity of spx ranges */ | |
| if (start_subband >= end_subband) { | |
| av_log(s->avctx, AV_LOG_ERROR, "invalid spectral extension " | |
| "range (%d >= %d)\n", start_subband, end_subband); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| if (dst_start_freq >= src_start_freq) { | |
| av_log(s->avctx, AV_LOG_ERROR, "invalid spectral extension " | |
| "copy start bin (%d >= %d)\n", dst_start_freq, src_start_freq); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| s->spx_dst_start_freq = dst_start_freq; | |
| s->spx_src_start_freq = src_start_freq; | |
| if (!USE_FIXED) | |
| s->spx_dst_end_freq = dst_end_freq; | |
| decode_band_structure(bc, blk, s->eac3, 0, | |
| start_subband, end_subband, | |
| ff_eac3_default_spx_band_struct, | |
| &s->num_spx_bands, | |
| s->spx_band_sizes, | |
| s->spx_band_struct, sizeof(s->spx_band_struct)); | |
| return 0; | |
| } | |
| static inline void spx_coordinates(AC3DecodeContext *s) | |
| { | |
| GetBitContext *bc = &s->gbc; | |
| int fbw_channels = s->fbw_channels; | |
| int ch, bnd; | |
| for (ch = 1; ch <= fbw_channels; ch++) { | |
| if (s->channel_uses_spx[ch]) { | |
| if (s->first_spx_coords[ch] || get_bits1(bc)) { | |
| INTFLOAT spx_blend; | |
| int bin, master_spx_coord; | |
| s->first_spx_coords[ch] = 0; | |
| spx_blend = AC3_SPX_BLEND(get_bits(bc, 5)); | |
| master_spx_coord = get_bits(bc, 2) * 3; | |
| bin = s->spx_src_start_freq; | |
| for (bnd = 0; bnd < s->num_spx_bands; bnd++) { | |
| int bandsize = s->spx_band_sizes[bnd]; | |
| int spx_coord_exp, spx_coord_mant; | |
| INTFLOAT nratio, sblend, nblend; | |
| #if USE_FIXED | |
| /* calculate blending factors */ | |
| int64_t accu = ((bin << 23) + (bandsize << 22)) | |
| * (int64_t)s->spx_dst_end_freq; | |
| nratio = (int)(accu >> 32); | |
| nratio -= spx_blend << 18; | |
| if (nratio < 0) { | |
| nblend = 0; | |
| sblend = 0x800000; | |
| } else if (nratio > 0x7fffff) { | |
| nblend = 14529495; // sqrt(3) in FP.23 | |
| sblend = 0; | |
| } else { | |
| nblend = fixed_sqrt(nratio, 23); | |
| accu = (int64_t)nblend * 1859775393; | |
| nblend = (int)((accu + (1<<29)) >> 30); | |
| sblend = fixed_sqrt(0x800000 - nratio, 23); | |
| } | |
| #else | |
| float spx_coord; | |
| /* calculate blending factors */ | |
| nratio = ((float)((bin + (bandsize >> 1))) / s->spx_dst_end_freq) - spx_blend; | |
| nratio = av_clipf(nratio, 0.0f, 1.0f); | |
| nblend = sqrtf(3.0f * nratio); // noise is scaled by sqrt(3) | |
| // to give unity variance | |
| sblend = sqrtf(1.0f - nratio); | |
| #endif | |
| bin += bandsize; | |
| /* decode spx coordinates */ | |
| spx_coord_exp = get_bits(bc, 4); | |
| spx_coord_mant = get_bits(bc, 2); | |
| if (spx_coord_exp == 15) spx_coord_mant <<= 1; | |
| else spx_coord_mant += 4; | |
| spx_coord_mant <<= (25 - spx_coord_exp - master_spx_coord); | |
| /* multiply noise and signal blending factors by spx coordinate */ | |
| #if USE_FIXED | |
| accu = (int64_t)nblend * spx_coord_mant; | |
| s->spx_noise_blend[ch][bnd] = (int)((accu + (1<<22)) >> 23); | |
| accu = (int64_t)sblend * spx_coord_mant; | |
| s->spx_signal_blend[ch][bnd] = (int)((accu + (1<<22)) >> 23); | |
| #else | |
| spx_coord = spx_coord_mant * (1.0f / (1 << 23)); | |
| s->spx_noise_blend [ch][bnd] = nblend * spx_coord; | |
| s->spx_signal_blend[ch][bnd] = sblend * spx_coord; | |
| #endif | |
| } | |
| } | |
| } else { | |
| s->first_spx_coords[ch] = 1; | |
| } | |
| } | |
| } | |
| static inline int coupling_strategy(AC3DecodeContext *s, int blk, | |
| uint8_t *bit_alloc_stages) | |
| { | |
| GetBitContext *bc = &s->gbc; | |
| int fbw_channels = s->fbw_channels; | |
| int channel_mode = s->channel_mode; | |
| int ch; | |
| memset(bit_alloc_stages, 3, AC3_MAX_CHANNELS); | |
| if (!s->eac3) | |
| s->cpl_in_use[blk] = get_bits1(bc); | |
| if (s->cpl_in_use[blk]) { | |
| /* coupling in use */ | |
| int cpl_start_subband, cpl_end_subband; | |
| if (channel_mode < AC3_CHMODE_STEREO) { | |
| av_log(s->avctx, AV_LOG_ERROR, "coupling not allowed in mono or dual-mono\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| /* check for enhanced coupling */ | |
| if (s->eac3 && get_bits1(bc)) { | |
| /* TODO: parse enhanced coupling strategy info */ | |
| avpriv_request_sample(s->avctx, "Enhanced coupling"); | |
| return AVERROR_PATCHWELCOME; | |
| } | |
| /* determine which channels are coupled */ | |
| if (s->eac3 && s->channel_mode == AC3_CHMODE_STEREO) { | |
| s->channel_in_cpl[1] = 1; | |
| s->channel_in_cpl[2] = 1; | |
| } else { | |
| for (ch = 1; ch <= fbw_channels; ch++) | |
| s->channel_in_cpl[ch] = get_bits1(bc); | |
| } | |
| /* phase flags in use */ | |
| if (channel_mode == AC3_CHMODE_STEREO) | |
| s->phase_flags_in_use = get_bits1(bc); | |
| /* coupling frequency range */ | |
| cpl_start_subband = get_bits(bc, 4); | |
| cpl_end_subband = s->spx_in_use ? (s->spx_src_start_freq - 37) / 12 : | |
| get_bits(bc, 4) + 3; | |
| if (cpl_start_subband >= cpl_end_subband) { | |
| av_log(s->avctx, AV_LOG_ERROR, "invalid coupling range (%d >= %d)\n", | |
| cpl_start_subband, cpl_end_subband); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| s->start_freq[CPL_CH] = cpl_start_subband * 12 + 37; | |
| s->end_freq[CPL_CH] = cpl_end_subband * 12 + 37; | |
| decode_band_structure(bc, blk, s->eac3, 0, cpl_start_subband, | |
| cpl_end_subband, | |
| ff_eac3_default_cpl_band_struct, | |
| &s->num_cpl_bands, s->cpl_band_sizes, | |
| s->cpl_band_struct, sizeof(s->cpl_band_struct)); | |
| } else { | |
| /* coupling not in use */ | |
| for (ch = 1; ch <= fbw_channels; ch++) { | |
| s->channel_in_cpl[ch] = 0; | |
| s->first_cpl_coords[ch] = 1; | |
| } | |
| s->first_cpl_leak = s->eac3; | |
| s->phase_flags_in_use = 0; | |
| } | |
| return 0; | |
| } | |
| static inline int coupling_coordinates(AC3DecodeContext *s, int blk) | |
| { | |
| GetBitContext *bc = &s->gbc; | |
| int fbw_channels = s->fbw_channels; | |
| int ch, bnd; | |
| int cpl_coords_exist = 0; | |
| for (ch = 1; ch <= fbw_channels; ch++) { | |
| if (s->channel_in_cpl[ch]) { | |
| if ((s->eac3 && s->first_cpl_coords[ch]) || get_bits1(bc)) { | |
| int master_cpl_coord, cpl_coord_exp, cpl_coord_mant; | |
| s->first_cpl_coords[ch] = 0; | |
| cpl_coords_exist = 1; | |
| master_cpl_coord = 3 * get_bits(bc, 2); | |
| for (bnd = 0; bnd < s->num_cpl_bands; bnd++) { | |
| cpl_coord_exp = get_bits(bc, 4); | |
| cpl_coord_mant = get_bits(bc, 4); | |
| if (cpl_coord_exp == 15) | |
| s->cpl_coords[ch][bnd] = cpl_coord_mant << 22; | |
| else | |
| s->cpl_coords[ch][bnd] = (cpl_coord_mant + 16) << 21; | |
| s->cpl_coords[ch][bnd] >>= (cpl_coord_exp + master_cpl_coord); | |
| } | |
| } else if (!blk) { | |
| av_log(s->avctx, AV_LOG_ERROR, "new coupling coordinates must " | |
| "be present in block 0\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| } else { | |
| /* channel not in coupling */ | |
| s->first_cpl_coords[ch] = 1; | |
| } | |
| } | |
| /* phase flags */ | |
| if (s->channel_mode == AC3_CHMODE_STEREO && cpl_coords_exist) { | |
| for (bnd = 0; bnd < s->num_cpl_bands; bnd++) { | |
| s->phase_flags[bnd] = s->phase_flags_in_use ? get_bits1(bc) : 0; | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * Decode a single audio block from the AC-3 bitstream. | |
| */ | |
| static int decode_audio_block(AC3DecodeContext *s, int blk, int offset) | |
| { | |
| int fbw_channels = s->fbw_channels; | |
| int channel_mode = s->channel_mode; | |
| int i, bnd, seg, ch, ret; | |
| int different_transforms; | |
| int downmix_output; | |
| int cpl_in_use; | |
| GetBitContext *gbc = &s->gbc; | |
| uint8_t bit_alloc_stages[AC3_MAX_CHANNELS] = { 0 }; | |
| /* block switch flags */ | |
| different_transforms = 0; | |
| if (s->block_switch_syntax) { | |
| for (ch = 1; ch <= fbw_channels; ch++) { | |
| s->block_switch[ch] = get_bits1(gbc); | |
| if (ch > 1 && s->block_switch[ch] != s->block_switch[1]) | |
| different_transforms = 1; | |
| } | |
| } | |
| /* dithering flags */ | |
| if (s->dither_flag_syntax) { | |
| for (ch = 1; ch <= fbw_channels; ch++) { | |
| s->dither_flag[ch] = get_bits1(gbc); | |
| } | |
| } | |
| /* dynamic range */ | |
| i = !s->channel_mode; | |
| do { | |
| if (get_bits1(gbc)) { | |
| /* Allow asymmetric application of DRC when drc_scale > 1. | |
| Amplification of quiet sounds is enhanced */ | |
| int range_bits = get_bits(gbc, 8); | |
| INTFLOAT range = AC3_RANGE(range_bits); | |
| if (range_bits <= 127 || s->drc_scale <= 1.0) | |
| s->dynamic_range[i] = AC3_DYNAMIC_RANGE(range); | |
| else | |
| s->dynamic_range[i] = range; | |
| } else if (blk == 0) { | |
| s->dynamic_range[i] = AC3_DYNAMIC_RANGE1; | |
| } | |
| } while (i--); | |
| /* spectral extension strategy */ | |
| if (s->eac3 && (!blk || get_bits1(gbc))) { | |
| s->spx_in_use = get_bits1(gbc); | |
| if (s->spx_in_use) { | |
| if ((ret = spx_strategy(s, blk)) < 0) | |
| return ret; | |
| } | |
| } | |
| if (!s->eac3 || !s->spx_in_use) { | |
| s->spx_in_use = 0; | |
| for (ch = 1; ch <= fbw_channels; ch++) { | |
| s->channel_uses_spx[ch] = 0; | |
| s->first_spx_coords[ch] = 1; | |
| } | |
| } | |
| /* spectral extension coordinates */ | |
| if (s->spx_in_use) | |
| spx_coordinates(s); | |
| /* coupling strategy */ | |
| if (s->eac3 ? s->cpl_strategy_exists[blk] : get_bits1(gbc)) { | |
| if ((ret = coupling_strategy(s, blk, bit_alloc_stages)) < 0) | |
| return ret; | |
| } else if (!s->eac3) { | |
| if (!blk) { | |
| av_log(s->avctx, AV_LOG_ERROR, "new coupling strategy must " | |
| "be present in block 0\n"); | |
| return AVERROR_INVALIDDATA; | |
| } else { | |
| s->cpl_in_use[blk] = s->cpl_in_use[blk-1]; | |
| } | |
| } | |
| cpl_in_use = s->cpl_in_use[blk]; | |
| /* coupling coordinates */ | |
| if (cpl_in_use) { | |
| if ((ret = coupling_coordinates(s, blk)) < 0) | |
| return ret; | |
| } | |
| /* stereo rematrixing strategy and band structure */ | |
| if (channel_mode == AC3_CHMODE_STEREO) { | |
| if ((s->eac3 && !blk) || get_bits1(gbc)) { | |
| s->num_rematrixing_bands = 4; | |
| if (cpl_in_use && s->start_freq[CPL_CH] <= 61) { | |
| s->num_rematrixing_bands -= 1 + (s->start_freq[CPL_CH] == 37); | |
| } else if (s->spx_in_use && s->spx_src_start_freq <= 61) { | |
| s->num_rematrixing_bands--; | |
| } | |
| for (bnd = 0; bnd < s->num_rematrixing_bands; bnd++) | |
| s->rematrixing_flags[bnd] = get_bits1(gbc); | |
| } else if (!blk) { | |
| av_log(s->avctx, AV_LOG_WARNING, "Warning: " | |
| "new rematrixing strategy not present in block 0\n"); | |
| s->num_rematrixing_bands = 0; | |
| } | |
| } | |
| /* exponent strategies for each channel */ | |
| for (ch = !cpl_in_use; ch <= s->channels; ch++) { | |
| if (!s->eac3) | |
| s->exp_strategy[blk][ch] = get_bits(gbc, 2 - (ch == s->lfe_ch)); | |
| if (s->exp_strategy[blk][ch] != EXP_REUSE) | |
| bit_alloc_stages[ch] = 3; | |
| } | |
| /* channel bandwidth */ | |
| for (ch = 1; ch <= fbw_channels; ch++) { | |
| s->start_freq[ch] = 0; | |
| if (s->exp_strategy[blk][ch] != EXP_REUSE) { | |
| int group_size; | |
| int prev = s->end_freq[ch]; | |
| if (s->channel_in_cpl[ch]) | |
| s->end_freq[ch] = s->start_freq[CPL_CH]; | |
| else if (s->channel_uses_spx[ch]) | |
| s->end_freq[ch] = s->spx_src_start_freq; | |
| else { | |
| int bandwidth_code = get_bits(gbc, 6); | |
| if (bandwidth_code > 60) { | |
| av_log(s->avctx, AV_LOG_ERROR, "bandwidth code = %d > 60\n", bandwidth_code); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| s->end_freq[ch] = bandwidth_code * 3 + 73; | |
| } | |
| group_size = 3 << (s->exp_strategy[blk][ch] - 1); | |
| s->num_exp_groups[ch] = (s->end_freq[ch] + group_size-4) / group_size; | |
| if (blk > 0 && s->end_freq[ch] != prev) | |
| memset(bit_alloc_stages, 3, AC3_MAX_CHANNELS); | |
| } | |
| } | |
| if (cpl_in_use && s->exp_strategy[blk][CPL_CH] != EXP_REUSE) { | |
| s->num_exp_groups[CPL_CH] = (s->end_freq[CPL_CH] - s->start_freq[CPL_CH]) / | |
| (3 << (s->exp_strategy[blk][CPL_CH] - 1)); | |
| } | |
| /* decode exponents for each channel */ | |
| for (ch = !cpl_in_use; ch <= s->channels; ch++) { | |
| if (s->exp_strategy[blk][ch] != EXP_REUSE) { | |
| s->dexps[ch][0] = get_bits(gbc, 4) << !ch; | |
| if (decode_exponents(s, gbc, s->exp_strategy[blk][ch], | |
| s->num_exp_groups[ch], s->dexps[ch][0], | |
| &s->dexps[ch][s->start_freq[ch]+!!ch])) { | |
| return AVERROR_INVALIDDATA; | |
| } | |
| if (ch != CPL_CH && ch != s->lfe_ch) | |
| skip_bits(gbc, 2); /* skip gainrng */ | |
| } | |
| } | |
| /* bit allocation information */ | |
| if (s->bit_allocation_syntax) { | |
| if (get_bits1(gbc)) { | |
| s->bit_alloc_params.slow_decay = ff_ac3_slow_decay_tab[get_bits(gbc, 2)] >> s->bit_alloc_params.sr_shift; | |
| s->bit_alloc_params.fast_decay = ff_ac3_fast_decay_tab[get_bits(gbc, 2)] >> s->bit_alloc_params.sr_shift; | |
| s->bit_alloc_params.slow_gain = ff_ac3_slow_gain_tab[get_bits(gbc, 2)]; | |
| s->bit_alloc_params.db_per_bit = ff_ac3_db_per_bit_tab[get_bits(gbc, 2)]; | |
| s->bit_alloc_params.floor = ff_ac3_floor_tab[get_bits(gbc, 3)]; | |
| for (ch = !cpl_in_use; ch <= s->channels; ch++) | |
| bit_alloc_stages[ch] = FFMAX(bit_alloc_stages[ch], 2); | |
| } else if (!blk) { | |
| av_log(s->avctx, AV_LOG_ERROR, "new bit allocation info must " | |
| "be present in block 0\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| } | |
| /* signal-to-noise ratio offsets and fast gains (signal-to-mask ratios) */ | |
| if (!s->eac3 || !blk) { | |
| if (s->snr_offset_strategy && get_bits1(gbc)) { | |
| int snr = 0; | |
| int csnr; | |
| csnr = (get_bits(gbc, 6) - 15) << 4; | |
| for (i = ch = !cpl_in_use; ch <= s->channels; ch++) { | |
| /* snr offset */ | |
| if (ch == i || s->snr_offset_strategy == 2) | |
| snr = (csnr + get_bits(gbc, 4)) << 2; | |
| /* run at least last bit allocation stage if snr offset changes */ | |
| if (blk && s->snr_offset[ch] != snr) { | |
| bit_alloc_stages[ch] = FFMAX(bit_alloc_stages[ch], 1); | |
| } | |
| s->snr_offset[ch] = snr; | |
| /* fast gain (normal AC-3 only) */ | |
| if (!s->eac3) { | |
| int prev = s->fast_gain[ch]; | |
| s->fast_gain[ch] = ff_ac3_fast_gain_tab[get_bits(gbc, 3)]; | |
| /* run last 2 bit allocation stages if fast gain changes */ | |
| if (blk && prev != s->fast_gain[ch]) | |
| bit_alloc_stages[ch] = FFMAX(bit_alloc_stages[ch], 2); | |
| } | |
| } | |
| } else if (!s->eac3 && !blk) { | |
| av_log(s->avctx, AV_LOG_ERROR, "new snr offsets must be present in block 0\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| } | |
| /* fast gain (E-AC-3 only) */ | |
| if (s->fast_gain_syntax && get_bits1(gbc)) { | |
| for (ch = !cpl_in_use; ch <= s->channels; ch++) { | |
| int prev = s->fast_gain[ch]; | |
| s->fast_gain[ch] = ff_ac3_fast_gain_tab[get_bits(gbc, 3)]; | |
| /* run last 2 bit allocation stages if fast gain changes */ | |
| if (blk && prev != s->fast_gain[ch]) | |
| bit_alloc_stages[ch] = FFMAX(bit_alloc_stages[ch], 2); | |
| } | |
| } else if (s->eac3 && !blk) { | |
| for (ch = !cpl_in_use; ch <= s->channels; ch++) | |
| s->fast_gain[ch] = ff_ac3_fast_gain_tab[4]; | |
| } | |
| /* E-AC-3 to AC-3 converter SNR offset */ | |
| if (s->frame_type == EAC3_FRAME_TYPE_INDEPENDENT && get_bits1(gbc)) { | |
| skip_bits(gbc, 10); // skip converter snr offset | |
| } | |
| /* coupling leak information */ | |
| if (cpl_in_use) { | |
| if (s->first_cpl_leak || get_bits1(gbc)) { | |
| int fl = get_bits(gbc, 3); | |
| int sl = get_bits(gbc, 3); | |
| /* run last 2 bit allocation stages for coupling channel if | |
| coupling leak changes */ | |
| if (blk && (fl != s->bit_alloc_params.cpl_fast_leak || | |
| sl != s->bit_alloc_params.cpl_slow_leak)) { | |
| bit_alloc_stages[CPL_CH] = FFMAX(bit_alloc_stages[CPL_CH], 2); | |
| } | |
| s->bit_alloc_params.cpl_fast_leak = fl; | |
| s->bit_alloc_params.cpl_slow_leak = sl; | |
| } else if (!s->eac3 && !blk) { | |
| av_log(s->avctx, AV_LOG_ERROR, "new coupling leak info must " | |
| "be present in block 0\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| s->first_cpl_leak = 0; | |
| } | |
| /* delta bit allocation information */ | |
| if (s->dba_syntax && get_bits1(gbc)) { | |
| /* delta bit allocation exists (strategy) */ | |
| for (ch = !cpl_in_use; ch <= fbw_channels; ch++) { | |
| s->dba_mode[ch] = get_bits(gbc, 2); | |
| if (s->dba_mode[ch] == DBA_RESERVED) { | |
| av_log(s->avctx, AV_LOG_ERROR, "delta bit allocation strategy reserved\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| bit_alloc_stages[ch] = FFMAX(bit_alloc_stages[ch], 2); | |
| } | |
| /* channel delta offset, len and bit allocation */ | |
| for (ch = !cpl_in_use; ch <= fbw_channels; ch++) { | |
| if (s->dba_mode[ch] == DBA_NEW) { | |
| s->dba_nsegs[ch] = get_bits(gbc, 3) + 1; | |
| for (seg = 0; seg < s->dba_nsegs[ch]; seg++) { | |
| s->dba_offsets[ch][seg] = get_bits(gbc, 5); | |
| s->dba_lengths[ch][seg] = get_bits(gbc, 4); | |
| s->dba_values[ch][seg] = get_bits(gbc, 3); | |
| } | |
| /* run last 2 bit allocation stages if new dba values */ | |
| bit_alloc_stages[ch] = FFMAX(bit_alloc_stages[ch], 2); | |
| } | |
| } | |
| } else if (blk == 0) { | |
| for (ch = 0; ch <= s->channels; ch++) { | |
| s->dba_mode[ch] = DBA_NONE; | |
| } | |
| } | |
| /* Bit allocation */ | |
| for (ch = !cpl_in_use; ch <= s->channels; ch++) { | |
| if (bit_alloc_stages[ch] > 2) { | |
| /* Exponent mapping into PSD and PSD integration */ | |
| ff_ac3_bit_alloc_calc_psd(s->dexps[ch], | |
| s->start_freq[ch], s->end_freq[ch], | |
| s->psd[ch], s->band_psd[ch]); | |
| } | |
| if (bit_alloc_stages[ch] > 1) { | |
| /* Compute excitation function, Compute masking curve, and | |
| Apply delta bit allocation */ | |
| if (ff_ac3_bit_alloc_calc_mask(&s->bit_alloc_params, s->band_psd[ch], | |
| s->start_freq[ch], s->end_freq[ch], | |
| s->fast_gain[ch], (ch == s->lfe_ch), | |
| s->dba_mode[ch], s->dba_nsegs[ch], | |
| s->dba_offsets[ch], s->dba_lengths[ch], | |
| s->dba_values[ch], s->mask[ch])) { | |
| av_log(s->avctx, AV_LOG_ERROR, "error in bit allocation\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| } | |
| if (bit_alloc_stages[ch] > 0) { | |
| /* Compute bit allocation */ | |
| const uint8_t *bap_tab = s->channel_uses_aht[ch] ? | |
| ff_eac3_hebap_tab : ff_ac3_bap_tab; | |
| s->ac3dsp.bit_alloc_calc_bap(s->mask[ch], s->psd[ch], | |
| s->start_freq[ch], s->end_freq[ch], | |
| s->snr_offset[ch], | |
| s->bit_alloc_params.floor, | |
| bap_tab, s->bap[ch]); | |
| } | |
| } | |
| /* unused dummy data */ | |
| if (s->skip_syntax && get_bits1(gbc)) { | |
| int skipl = get_bits(gbc, 9); | |
| skip_bits_long(gbc, 8 * skipl); | |
| } | |
| /* unpack the transform coefficients | |
| this also uncouples channels if coupling is in use. */ | |
| decode_transform_coeffs(s, blk); | |
| /* TODO: generate enhanced coupling coordinates and uncouple */ | |
| /* recover coefficients if rematrixing is in use */ | |
| if (s->channel_mode == AC3_CHMODE_STEREO) | |
| do_rematrixing(s); | |
| /* apply scaling to coefficients (headroom, dynrng) */ | |
| for (ch = 1; ch <= s->channels; ch++) { | |
| int audio_channel = 0; | |
| INTFLOAT gain; | |
| if (s->channel_mode == AC3_CHMODE_DUALMONO && ch <= 2) | |
| audio_channel = 2-ch; | |
| if (s->heavy_compression && s->compression_exists[audio_channel]) | |
| gain = s->heavy_dynamic_range[audio_channel]; | |
| else | |
| gain = s->dynamic_range[audio_channel]; | |
| #if USE_FIXED | |
| scale_coefs(s->transform_coeffs[ch], s->fixed_coeffs[ch], gain, 256); | |
| #else | |
| if (s->target_level != 0) | |
| gain = gain * s->level_gain[audio_channel]; | |
| gain *= 1.0 / 4194304.0f; | |
| s->fmt_conv.int32_to_float_fmul_scalar(s->transform_coeffs[ch], | |
| s->fixed_coeffs[ch], gain, 256); | |
| #endif | |
| } | |
| /* apply spectral extension to high frequency bins */ | |
| if (CONFIG_EAC3_DECODER && s->spx_in_use) { | |
| ff_eac3_apply_spectral_extension(s); | |
| } | |
| /* downmix and MDCT. order depends on whether block switching is used for | |
| any channel in this block. this is because coefficients for the long | |
| and short transforms cannot be mixed. */ | |
| downmix_output = s->channels != s->out_channels && | |
| !((s->output_mode & AC3_OUTPUT_LFEON) && | |
| s->fbw_channels == s->out_channels); | |
| if (different_transforms) { | |
| /* the delay samples have already been downmixed, so we upmix the delay | |
| samples in order to reconstruct all channels before downmixing. */ | |
| if (s->downmixed) { | |
| s->downmixed = 0; | |
| ac3_upmix_delay(s); | |
| } | |
| do_imdct(s, s->channels, offset); | |
| if (downmix_output) { | |
| #if USE_FIXED | |
| ac3_downmix_c_fixed16(s->outptr, s->downmix_coeffs, | |
| s->out_channels, s->fbw_channels, 256); | |
| #else | |
| ff_ac3dsp_downmix(&s->ac3dsp, s->outptr, s->downmix_coeffs, | |
| s->out_channels, s->fbw_channels, 256); | |
| #endif | |
| } | |
| } else { | |
| if (downmix_output) { | |
| AC3_RENAME(ff_ac3dsp_downmix)(&s->ac3dsp, s->xcfptr + 1, s->downmix_coeffs, | |
| s->out_channels, s->fbw_channels, 256); | |
| } | |
| if (downmix_output && !s->downmixed) { | |
| s->downmixed = 1; | |
| AC3_RENAME(ff_ac3dsp_downmix)(&s->ac3dsp, s->dlyptr, s->downmix_coeffs, | |
| s->out_channels, s->fbw_channels, 128); | |
| } | |
| do_imdct(s, s->out_channels, offset); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * Decode a single AC-3 frame. | |
| */ | |
| static int ac3_decode_frame(AVCodecContext *avctx, AVFrame *frame, | |
| int *got_frame_ptr, AVPacket *avpkt) | |
| { | |
| const uint8_t *buf = avpkt->data; | |
| int buf_size, full_buf_size = avpkt->size; | |
| AC3DecodeContext *s = avctx->priv_data; | |
| int blk, ch, err, offset, ret; | |
| int i; | |
| int skip = 0, got_independent_frame = 0; | |
| const uint8_t *channel_map; | |
| uint8_t extended_channel_map[EAC3_MAX_CHANNELS]; | |
| const SHORTFLOAT *output[AC3_MAX_CHANNELS]; | |
| enum AVMatrixEncoding matrix_encoding; | |
| AVDownmixInfo *downmix_info; | |
| uint64_t mask; | |
| s->superframe_size = 0; | |
| buf_size = full_buf_size; | |
| i = ff_ac3_find_syncword(buf, buf_size); | |
| if (i < 0 || i > 10) | |
| return i; | |
| buf += i; | |
| buf_size -= i; | |
| /* copy input buffer to decoder context to avoid reading past the end | |
| of the buffer, which can be caused by a damaged input stream. */ | |
| if (buf_size >= 2 && AV_RB16(buf) == 0x770B) { | |
| // seems to be byte-swapped AC-3 | |
| int cnt = FFMIN(buf_size, AC3_FRAME_BUFFER_SIZE) >> 1; | |
| s->bdsp.bswap16_buf((uint16_t *) s->input_buffer, | |
| (const uint16_t *) buf, cnt); | |
| } else | |
| memcpy(s->input_buffer, buf, FFMIN(buf_size, AC3_FRAME_BUFFER_SIZE)); | |
| /* if consistent noise generation is enabled, seed the linear feedback generator | |
| * with the contents of the AC-3 frame so that the noise is identical across | |
| * decodes given the same AC-3 frame data, for use with non-linear edititing software. */ | |
| if (s->consistent_noise_generation) | |
| av_lfg_init_from_data(&s->dith_state, s->input_buffer, FFMIN(buf_size, AC3_FRAME_BUFFER_SIZE)); | |
| buf = s->input_buffer; | |
| dependent_frame: | |
| /* initialize the GetBitContext with the start of valid AC-3 Frame */ | |
| if ((ret = init_get_bits8(&s->gbc, buf, buf_size)) < 0) | |
| return ret; | |
| /* parse the syncinfo */ | |
| err = parse_frame_header(s); | |
| if (err) { | |
| switch (err) { | |
| case AAC_AC3_PARSE_ERROR_SYNC: | |
| av_log(avctx, AV_LOG_ERROR, "frame sync error\n"); | |
| return AVERROR_INVALIDDATA; | |
| case AAC_AC3_PARSE_ERROR_BSID: | |
| av_log(avctx, AV_LOG_ERROR, "invalid bitstream id\n"); | |
| break; | |
| case AAC_AC3_PARSE_ERROR_SAMPLE_RATE: | |
| av_log(avctx, AV_LOG_ERROR, "invalid sample rate\n"); | |
| break; | |
| case AAC_AC3_PARSE_ERROR_FRAME_SIZE: | |
| av_log(avctx, AV_LOG_ERROR, "invalid frame size\n"); | |
| break; | |
| case AAC_AC3_PARSE_ERROR_FRAME_TYPE: | |
| /* skip frame if CRC is ok. otherwise use error concealment. */ | |
| /* TODO: add support for substreams */ | |
| if (s->substreamid) { | |
| av_log(avctx, AV_LOG_DEBUG, | |
| "unsupported substream %d: skipping frame\n", | |
| s->substreamid); | |
| *got_frame_ptr = 0; | |
| return buf_size; | |
| } else { | |
| av_log(avctx, AV_LOG_ERROR, "invalid frame type\n"); | |
| } | |
| break; | |
| case AAC_AC3_PARSE_ERROR_CRC: | |
| case AAC_AC3_PARSE_ERROR_CHANNEL_CFG: | |
| break; | |
| default: // Normal AVERROR do not try to recover. | |
| *got_frame_ptr = 0; | |
| return err; | |
| } | |
| } else { | |
| /* check that reported frame size fits in input buffer */ | |
| if (s->frame_size > buf_size) { | |
| av_log(avctx, AV_LOG_ERROR, "incomplete frame\n"); | |
| err = AAC_AC3_PARSE_ERROR_FRAME_SIZE; | |
| } else if (avctx->err_recognition & (AV_EF_CRCCHECK|AV_EF_CAREFUL)) { | |
| /* check for crc mismatch */ | |
| if (av_crc(av_crc_get_table(AV_CRC_16_ANSI), 0, &buf[2], | |
| s->frame_size - 2)) { | |
| av_log(avctx, AV_LOG_ERROR, "frame CRC mismatch\n"); | |
| if (avctx->err_recognition & AV_EF_EXPLODE) | |
| return AVERROR_INVALIDDATA; | |
| err = AAC_AC3_PARSE_ERROR_CRC; | |
| } | |
| } | |
| } | |
| if (s->frame_type == EAC3_FRAME_TYPE_DEPENDENT && !got_independent_frame) { | |
| av_log(avctx, AV_LOG_WARNING, "Ignoring dependent frame without independent frame.\n"); | |
| *got_frame_ptr = 0; | |
| return FFMIN(full_buf_size, s->frame_size); | |
| } | |
| /* channel config */ | |
| if (!err || (s->channels && s->out_channels != s->channels)) { | |
| s->out_channels = s->channels; | |
| s->output_mode = s->channel_mode; | |
| if (s->lfe_on) | |
| s->output_mode |= AC3_OUTPUT_LFEON; | |
| if (s->channels > 1 && | |
| !av_channel_layout_compare(&s->downmix_layout, &(AVChannelLayout)AV_CHANNEL_LAYOUT_MONO)) { | |
| s->out_channels = 1; | |
| s->output_mode = AC3_CHMODE_MONO; | |
| } else if (s->channels > 2 && | |
| !av_channel_layout_compare(&s->downmix_layout, &(AVChannelLayout)AV_CHANNEL_LAYOUT_STEREO)) { | |
| s->out_channels = 2; | |
| s->output_mode = AC3_CHMODE_STEREO; | |
| } | |
| s->loro_center_mix_level = gain_levels[s-> center_mix_level]; | |
| s->loro_surround_mix_level = gain_levels[s->surround_mix_level]; | |
| s->ltrt_center_mix_level = LEVEL_MINUS_3DB; | |
| s->ltrt_surround_mix_level = LEVEL_MINUS_3DB; | |
| /* set downmixing coefficients if needed */ | |
| if (s->channels != s->out_channels && !((s->output_mode & AC3_OUTPUT_LFEON) && | |
| s->fbw_channels == s->out_channels)) { | |
| if ((ret = set_downmix_coeffs(s)) < 0) { | |
| av_log(avctx, AV_LOG_ERROR, "error setting downmix coeffs\n"); | |
| return ret; | |
| } | |
| } | |
| } else if (!s->channels) { | |
| av_log(avctx, AV_LOG_ERROR, "unable to determine channel mode\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| mask = ff_ac3_channel_layout_tab[s->output_mode & ~AC3_OUTPUT_LFEON]; | |
| if (s->output_mode & AC3_OUTPUT_LFEON) | |
| mask |= AV_CH_LOW_FREQUENCY; | |
| av_channel_layout_uninit(&avctx->ch_layout); | |
| av_channel_layout_from_mask(&avctx->ch_layout, mask); | |
| /* set audio service type based on bitstream mode for AC-3 */ | |
| avctx->audio_service_type = s->bitstream_mode; | |
| if (s->bitstream_mode == 0x7 && s->channels > 1) | |
| avctx->audio_service_type = AV_AUDIO_SERVICE_TYPE_KARAOKE; | |
| /* decode the audio blocks */ | |
| channel_map = ff_ac3_dec_channel_map[s->output_mode & ~AC3_OUTPUT_LFEON][s->lfe_on]; | |
| offset = s->frame_type == EAC3_FRAME_TYPE_DEPENDENT ? AC3_MAX_CHANNELS : 0; | |
| for (ch = 0; ch < AC3_MAX_CHANNELS; ch++) { | |
| output[ch] = s->output[ch + offset]; | |
| s->outptr[ch] = s->output[ch + offset]; | |
| } | |
| for (ch = 0; ch < s->channels; ch++) { | |
| if (ch < s->out_channels) | |
| s->outptr[channel_map[ch]] = s->output_buffer[ch + offset]; | |
| } | |
| for (blk = 0; blk < s->num_blocks; blk++) { | |
| if (!err && decode_audio_block(s, blk, offset)) { | |
| av_log(avctx, AV_LOG_ERROR, "error decoding the audio block\n"); | |
| err = 1; | |
| } | |
| if (err) | |
| for (ch = 0; ch < s->out_channels; ch++) | |
| memcpy(s->output_buffer[ch + offset] + AC3_BLOCK_SIZE*blk, output[ch], AC3_BLOCK_SIZE*sizeof(SHORTFLOAT)); | |
| for (ch = 0; ch < s->out_channels; ch++) | |
| output[ch] = s->outptr[channel_map[ch]]; | |
| for (ch = 0; ch < s->out_channels; ch++) { | |
| if (!ch || channel_map[ch]) | |
| s->outptr[channel_map[ch]] += AC3_BLOCK_SIZE; | |
| } | |
| } | |
| /* keep last block for error concealment in next frame */ | |
| for (ch = 0; ch < s->out_channels; ch++) | |
| memcpy(s->output[ch + offset], output[ch], AC3_BLOCK_SIZE*sizeof(SHORTFLOAT)); | |
| /* check if there is dependent frame */ | |
| if (buf_size > s->frame_size) { | |
| AC3HeaderInfo hdr; | |
| int err; | |
| if (buf_size - s->frame_size <= 16) { | |
| skip = buf_size - s->frame_size; | |
| goto skip; | |
| } | |
| if ((ret = init_get_bits8(&s->gbc, buf + s->frame_size, buf_size - s->frame_size)) < 0) | |
| return ret; | |
| err = ff_ac3_parse_header(&s->gbc, &hdr); | |
| if (err) | |
| return err; | |
| if (hdr.frame_type == EAC3_FRAME_TYPE_DEPENDENT) { | |
| if (hdr.num_blocks != s->num_blocks || s->sample_rate != hdr.sample_rate) { | |
| av_log(avctx, AV_LOG_WARNING, "Ignoring non-compatible dependent frame.\n"); | |
| } else { | |
| buf += s->frame_size; | |
| buf_size -= s->frame_size; | |
| s->prev_output_mode = s->output_mode; | |
| s->prev_bit_rate = s->bit_rate; | |
| got_independent_frame = 1; | |
| goto dependent_frame; | |
| } | |
| } | |
| } | |
| skip: | |
| frame->decode_error_flags = err ? FF_DECODE_ERROR_INVALID_BITSTREAM : 0; | |
| /* if frame is ok, set audio parameters */ | |
| if (!err) { | |
| avctx->sample_rate = s->sample_rate; | |
| avctx->bit_rate = s->bit_rate + s->prev_bit_rate; | |
| avctx->profile = s->eac3_extension_type_a == 1 ? AV_PROFILE_EAC3_DDP_ATMOS : AV_PROFILE_UNKNOWN; | |
| } | |
| if (!avctx->sample_rate) { | |
| av_log(avctx, AV_LOG_ERROR, "Could not determine the sample rate\n"); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| for (ch = 0; ch < EAC3_MAX_CHANNELS; ch++) | |
| extended_channel_map[ch] = ch; | |
| if (s->frame_type == EAC3_FRAME_TYPE_DEPENDENT) { | |
| uint64_t ich_layout = ff_ac3_channel_layout_tab[s->prev_output_mode & ~AC3_OUTPUT_LFEON]; | |
| int channel_map_size = ff_ac3_channels_tab[s->output_mode & ~AC3_OUTPUT_LFEON] + s->lfe_on; | |
| uint64_t channel_layout; | |
| int extend = 0; | |
| if (s->prev_output_mode & AC3_OUTPUT_LFEON) | |
| ich_layout |= AV_CH_LOW_FREQUENCY; | |
| channel_layout = ich_layout; | |
| for (ch = 0; ch < 16; ch++) { | |
| if (s->channel_map & (1 << (EAC3_MAX_CHANNELS - ch - 1))) { | |
| channel_layout |= ff_eac3_custom_channel_map_locations[ch][1]; | |
| } | |
| } | |
| if (av_popcount64(channel_layout) > EAC3_MAX_CHANNELS) { | |
| av_log(avctx, AV_LOG_ERROR, "Too many channels (%d) coded\n", | |
| av_popcount64(channel_layout)); | |
| return AVERROR_INVALIDDATA; | |
| } | |
| av_channel_layout_uninit(&avctx->ch_layout); | |
| av_channel_layout_from_mask(&avctx->ch_layout, channel_layout); | |
| for (ch = 0; ch < EAC3_MAX_CHANNELS; ch++) { | |
| if (s->channel_map & (1 << (EAC3_MAX_CHANNELS - ch - 1))) { | |
| if (ff_eac3_custom_channel_map_locations[ch][0]) { | |
| int index = av_channel_layout_index_from_channel(&avctx->ch_layout, | |
| ff_ctzll(ff_eac3_custom_channel_map_locations[ch][1])); | |
| if (index < 0) | |
| return AVERROR_INVALIDDATA; | |
| if (extend >= channel_map_size) | |
| break; | |
| extended_channel_map[index] = offset + channel_map[extend++]; | |
| } else { | |
| int i; | |
| for (i = 0; i < 64; i++) { | |
| if ((1ULL << i) & ff_eac3_custom_channel_map_locations[ch][1]) { | |
| int index = av_channel_layout_index_from_channel(&avctx->ch_layout, i); | |
| if (index < 0) | |
| return AVERROR_INVALIDDATA; | |
| if (extend >= channel_map_size) | |
| break; | |
| extended_channel_map[index] = offset + channel_map[extend++]; | |
| } | |
| } | |
| } | |
| } | |
| } | |
| ac3_downmix(avctx); | |
| } | |
| /* get output buffer */ | |
| frame->nb_samples = s->num_blocks * AC3_BLOCK_SIZE; | |
| if ((ret = ff_get_buffer(avctx, frame, 0)) < 0) | |
| return ret; | |
| for (ch = 0; ch < avctx->ch_layout.nb_channels; ch++) { | |
| int map = extended_channel_map[ch]; | |
| av_assert0(ch>=AV_NUM_DATA_POINTERS || frame->extended_data[ch] == frame->data[ch]); | |
| memcpy((SHORTFLOAT *)frame->extended_data[ch], | |
| s->output_buffer[map], | |
| s->num_blocks * AC3_BLOCK_SIZE * sizeof(SHORTFLOAT)); | |
| } | |
| /* | |
| * AVMatrixEncoding | |
| * | |
| * Check whether the input layout is compatible, and make sure we're not | |
| * downmixing (else the matrix encoding is no longer applicable). | |
| */ | |
| matrix_encoding = AV_MATRIX_ENCODING_NONE; | |
| if (s->channel_mode == AC3_CHMODE_STEREO && | |
| s->channel_mode == (s->output_mode & ~AC3_OUTPUT_LFEON)) { | |
| if (s->dolby_surround_mode == AC3_DSURMOD_ON) | |
| matrix_encoding = AV_MATRIX_ENCODING_DOLBY; | |
| else if (s->dolby_headphone_mode == AC3_DHEADPHONMOD_ON) | |
| matrix_encoding = AV_MATRIX_ENCODING_DOLBYHEADPHONE; | |
| } else if (s->channel_mode >= AC3_CHMODE_2F2R && | |
| s->channel_mode == (s->output_mode & ~AC3_OUTPUT_LFEON)) { | |
| switch (s->dolby_surround_ex_mode) { | |
| case AC3_DSUREXMOD_ON: // EX or PLIIx | |
| matrix_encoding = AV_MATRIX_ENCODING_DOLBYEX; | |
| break; | |
| case AC3_DSUREXMOD_PLIIZ: | |
| matrix_encoding = AV_MATRIX_ENCODING_DPLIIZ; | |
| break; | |
| default: // not indicated or off | |
| break; | |
| } | |
| } | |
| if ((ret = ff_side_data_update_matrix_encoding(frame, matrix_encoding)) < 0) | |
| return ret; | |
| /* AVDownmixInfo */ | |
| if ((downmix_info = av_downmix_info_update_side_data(frame))) { | |
| switch (s->preferred_downmix) { | |
| case AC3_DMIXMOD_LTRT: | |
| downmix_info->preferred_downmix_type = AV_DOWNMIX_TYPE_LTRT; | |
| break; | |
| case AC3_DMIXMOD_LORO: | |
| downmix_info->preferred_downmix_type = AV_DOWNMIX_TYPE_LORO; | |
| break; | |
| case AC3_DMIXMOD_DPLII: | |
| downmix_info->preferred_downmix_type = AV_DOWNMIX_TYPE_DPLII; | |
| break; | |
| default: | |
| downmix_info->preferred_downmix_type = AV_DOWNMIX_TYPE_UNKNOWN; | |
| break; | |
| } | |
| downmix_info->center_mix_level = gain_levels[s-> center_mix_level]; | |
| downmix_info->center_mix_level_ltrt = gain_levels[s-> center_mix_level_ltrt]; | |
| downmix_info->surround_mix_level = gain_levels[s-> surround_mix_level]; | |
| downmix_info->surround_mix_level_ltrt = gain_levels[s->surround_mix_level_ltrt]; | |
| if (s->lfe_mix_level_exists) | |
| downmix_info->lfe_mix_level = gain_levels_lfe[s->lfe_mix_level]; | |
| else | |
| downmix_info->lfe_mix_level = 0.0; // -inf dB | |
| } else | |
| return AVERROR(ENOMEM); | |
| *got_frame_ptr = 1; | |
| if (!s->superframe_size) | |
| return FFMIN(full_buf_size, s->frame_size + skip); | |
| return FFMIN(full_buf_size, s->superframe_size + skip); | |
| } | |
| /** | |
| * Uninitialize the AC-3 decoder. | |
| */ | |
| static av_cold int ac3_decode_end(AVCodecContext *avctx) | |
| { | |
| AC3DecodeContext *s = avctx->priv_data; | |
| av_tx_uninit(&s->tx_256); | |
| av_tx_uninit(&s->tx_128); | |
| av_freep(&s->fdsp); | |
| av_freep(&s->downmix_coeffs[0]); | |
| return 0; | |
| } | |
| #define OFFSET(x) offsetof(AC3DecodeContext, x) | |
| #define PAR (AV_OPT_FLAG_DECODING_PARAM | AV_OPT_FLAG_AUDIO_PARAM) |