| /* | |
| * VC1 NEON optimisations | |
| * | |
| * Copyright (c) 2010 Rob Clark <rob@ti.com> | |
| * Copyright (c) 2011 Mans Rullgard <mans@mansr.com> | |
| * | |
| * This file is part of FFmpeg. | |
| * | |
| * FFmpeg is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU Lesser General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2.1 of the License, or (at your option) any later version. | |
| * | |
| * FFmpeg is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * Lesser General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU Lesser General Public | |
| * License along with FFmpeg; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA | |
| */ | |
| #include "libavutil/arm/asm.S" | |
| #include "neon.S" | |
| #include "config.h" | |
| @ Transpose rows into columns of a matrix of 16-bit elements. For 4x4, pass | |
| @ double-word registers, for 8x4, pass quad-word registers. | |
| .macro transpose16 r0, r1, r2, r3 | |
| @ At this point: | |
| @ row[0] r0 | |
| @ row[1] r1 | |
| @ row[2] r2 | |
| @ row[3] r3 | |
| vtrn.16 \r0, \r1 @ first and second row | |
| vtrn.16 \r2, \r3 @ third and fourth row | |
| vtrn.32 \r0, \r2 @ first and third row | |
| vtrn.32 \r1, \r3 @ second and fourth row | |
| @ At this point, if registers are quad-word: | |
| @ column[0] d0 | |
| @ column[1] d2 | |
| @ column[2] d4 | |
| @ column[3] d6 | |
| @ column[4] d1 | |
| @ column[5] d3 | |
| @ column[6] d5 | |
| @ column[7] d7 | |
| @ At this point, if registers are double-word: | |
| @ column[0] d0 | |
| @ column[1] d1 | |
| @ column[2] d2 | |
| @ column[3] d3 | |
| .endm | |
| @ ff_vc1_inv_trans_{4,8}x{4,8}_neon and overflow: The input values in the file | |
| @ are supposed to be in a specific range as to allow for 16-bit math without | |
| @ causing overflows, but sometimes the input values are just big enough to | |
| @ barely cause overflow in vadd instructions like: | |
| @ | |
| @ vadd.i16 q0, q8, q10 | |
| @ vshr.s16 q0, q0, #\rshift | |
| @ | |
| @ To prevent these borderline cases from overflowing, we just need one more | |
| @ bit of precision, which is accomplished by replacing the sequence above with: | |
| @ | |
| @ vhadd.s16 q0, q8, q10 | |
| @ vshr.s16 q0, q0, #(\rshift -1) | |
| @ | |
| @ This works because vhadd is a single instruction that adds, then shifts to | |
| @ the right once, all before writing the result to the destination register. | |
| @ | |
| @ Even with this workaround, there were still some files that caused overflows | |
| @ in ff_vc1_inv_trans_8x8_neon. See the comments in ff_vc1_inv_trans_8x8_neon | |
| @ for the additional workaround. | |
| @ Takes 4 columns of 8 values each and operates on it. Modeled after the first | |
| @ for loop in vc1_inv_trans_4x8_c. | |
| @ Input columns: q0 q1 q2 q3 | |
| @ Output columns: q0 q1 q2 q3 | |
| @ Trashes: r12 q8 q9 q10 q11 q12 q13 | |
| .macro vc1_inv_trans_4x8_helper add rshift | |
| @ Compute temp1, temp2 and setup scalar #17, #22, #10 | |
| vadd.i16 q12, q0, q2 @ temp1 = src[0] + src[2] | |
| movw r12, #17 | |
| vsub.i16 q13, q0, q2 @ temp2 = src[0] - src[2] | |
| movt r12, #22 | |
| vmov.32 d0[0], r12 | |
| movw r12, #10 | |
| vmov.16 d1[0], r12 | |
| vmov.i16 q8, #\add @ t1 will accumulate here | |
| vmov.i16 q9, #\add @ t2 will accumulate here | |
| vmul.i16 q10, q1, d0[1] @ t3 = 22 * (src[1]) | |
| vmul.i16 q11, q3, d0[1] @ t4 = 22 * (src[3]) | |
| vmla.i16 q8, q12, d0[0] @ t1 = 17 * (temp1) + 4 | |
| vmla.i16 q9, q13, d0[0] @ t2 = 17 * (temp2) + 4 | |
| vmla.i16 q10, q3, d1[0] @ t3 += 10 * src[3] | |
| vmls.i16 q11, q1, d1[0] @ t4 -= 10 * src[1] | |
| vhadd.s16 q0, q8, q10 @ dst[0] = (t1 + t3) >> 1 | |
| vhsub.s16 q3, q8, q10 @ dst[3] = (t1 - t3) >> 1 | |
| vhsub.s16 q1, q9, q11 @ dst[1] = (t2 - t4) >> 1 | |
| vhadd.s16 q2, q9, q11 @ dst[2] = (t2 + t4) >> 1 | |
| @ Halving add/sub above already did one shift | |
| vshr.s16 q0, q0, #(\rshift - 1) @ dst[0] >>= (rshift - 1) | |
| vshr.s16 q3, q3, #(\rshift - 1) @ dst[3] >>= (rshift - 1) | |
| vshr.s16 q1, q1, #(\rshift - 1) @ dst[1] >>= (rshift - 1) | |
| vshr.s16 q2, q2, #(\rshift - 1) @ dst[2] >>= (rshift - 1) | |
| .endm | |
| @ Takes 8 columns of 4 values each and operates on it. Modeled after the second | |
| @ for loop in vc1_inv_trans_4x8_c. | |
| @ Input columns: d0 d2 d4 d6 d1 d3 d5 d7 | |
| @ Output columns: d16 d17 d18 d19 d21 d20 d23 d22 | |
| @ Trashes all NEON registers (and r12) except for: q4 q5 q6 q7 | |
| .macro vc1_inv_trans_8x4_helper add add1beforeshift rshift | |
| @ At this point: | |
| @ src[0] d0 overwritten later | |
| @ src[8] d2 | |
| @ src[16] d4 overwritten later | |
| @ src[24] d6 | |
| @ src[32] d1 overwritten later | |
| @ src[40] d3 | |
| @ src[48] d5 overwritten later | |
| @ src[56] d7 | |
| movw r12, #12 | |
| vmov.i16 q14, #\add @ t1|t2 will accumulate here | |
| movt r12, #6 | |
| vadd.i16 d20, d0, d1 @ temp1 = src[0] + src[32] | |
| vsub.i16 d21, d0, d1 @ temp2 = src[0] - src[32] | |
| vmov.i32 d0[0], r12 @ 16-bit: d0[0] = #12, d0[1] = #6 | |
| vshl.i16 q15, q2, #4 @ t3|t4 = 16 * (src[16]|src[48]) | |
| vswp d4, d5 @ q2 = src[48]|src[16] | |
| vmla.i16 q14, q10, d0[0] @ t1|t2 = 12 * (temp1|temp2) + 64 | |
| movw r12, #15 | |
| movt r12, #9 | |
| vmov.i32 d0[1], r12 @ 16-bit: d0[2] = #15, d0[3] = #9 | |
| vneg.s16 d31, d31 @ t4 = -t4 | |
| vmla.i16 q15, q2, d0[1] @ t3|t4 += 6 * (src[48]|src[16]) | |
| @ At this point: | |
| @ d0[2] #15 | |
| @ d0[3] #9 | |
| @ q1 src[8]|src[40] | |
| @ q3 src[24]|src[56] | |
| @ q14 old t1|t2 | |
| @ q15 old t3|t4 | |
| vshl.i16 q8, q1, #4 @ t1|t2 = 16 * (src[8]|src[40]) | |
| vswp d2, d3 @ q1 = src[40]|src[8] | |
| vshl.i16 q12, q3, #4 @ temp3a|temp4a = 16 * src[24]|src[56] | |
| vswp d6, d7 @ q3 = src[56]|src[24] | |
| vshl.i16 q13, q1, #2 @ temp3b|temp4b = 4 * (src[40]|src[8]) | |
| vshl.i16 q2, q3, #2 @ temp1|temp2 = 4 * (src[56]|src[24]) | |
| vswp d3, d6 @ q1 = src[40]|src[56], q3 = src[8]|src[24] | |
| vsub.i16 q9, q13, q12 @ t3|t4 = - (temp3a|temp4a) + (temp3b|temp4b) | |
| vadd.i16 q8, q8, q2 @ t1|t2 += temp1|temp2 | |
| vmul.i16 q12, q3, d0[3] @ temp3|temp4 = 9 * src[8]|src[24] | |
| vmla.i16 q8, q1, d0[3] @ t1|t2 += 9 * (src[40]|src[56]) | |
| vswp d6, d7 @ q3 = src[24]|src[8] | |
| vswp d2, d3 @ q1 = src[56]|src[40] | |
| vsub.i16 q11, q14, q15 @ t8|t7 = old t1|t2 - old t3|t4 | |
| vadd.i16 q10, q14, q15 @ t5|t6 = old t1|t2 + old t3|t4 | |
| .if \add1beforeshift | |
| vmov.i16 q15, #1 | |
| .endif | |
| vadd.i16 d18, d18, d24 @ t3 += temp3 | |
| vsub.i16 d19, d19, d25 @ t4 -= temp4 | |
| vswp d22, d23 @ q11 = t7|t8 | |
| vneg.s16 d17, d17 @ t2 = -t2 | |
| vmla.i16 q9, q1, d0[2] @ t3|t4 += 15 * src[56]|src[40] | |
| vmla.i16 q8, q3, d0[2] @ t1|t2 += 15 * src[24]|src[8] | |
| @ At this point: | |
| @ t1 d16 | |
| @ t2 d17 | |
| @ t3 d18 | |
| @ t4 d19 | |
| @ t5 d20 | |
| @ t6 d21 | |
| @ t7 d22 | |
| @ t8 d23 | |
| @ #1 q15 | |
| .if \add1beforeshift | |
| vadd.i16 q3, q15, q10 @ line[7,6] = t5|t6 + 1 | |
| vadd.i16 q2, q15, q11 @ line[5,4] = t7|t8 + 1 | |
| .endif | |
| @ Sometimes this overflows, so to get one additional bit of precision, use | |
| @ a single instruction that both adds and shifts right (halving). | |
| vhadd.s16 q1, q9, q11 @ line[2,3] = (t3|t4 + t7|t8) >> 1 | |
| vhadd.s16 q0, q8, q10 @ line[0,1] = (t1|t2 + t5|t6) >> 1 | |
| .if \add1beforeshift | |
| vhsub.s16 q2, q2, q9 @ line[5,4] = (t7|t8 - t3|t4 + 1) >> 1 | |
| vhsub.s16 q3, q3, q8 @ line[7,6] = (t5|t6 - t1|t2 + 1) >> 1 | |
| .else | |
| vhsub.s16 q2, q11, q9 @ line[5,4] = (t7|t8 - t3|t4) >> 1 | |
| vhsub.s16 q3, q10, q8 @ line[7,6] = (t5|t6 - t1|t2) >> 1 | |
| .endif | |
| vshr.s16 q9, q1, #(\rshift - 1) @ one shift is already done by vhadd/vhsub above | |
| vshr.s16 q8, q0, #(\rshift - 1) | |
| vshr.s16 q10, q2, #(\rshift - 1) | |
| vshr.s16 q11, q3, #(\rshift - 1) | |
| @ At this point: | |
| @ dst[0] d16 | |
| @ dst[1] d17 | |
| @ dst[2] d18 | |
| @ dst[3] d19 | |
| @ dst[4] d21 | |
| @ dst[5] d20 | |
| @ dst[6] d23 | |
| @ dst[7] d22 | |
| .endm | |
| @ This is modeled after the first and second for loop in vc1_inv_trans_8x8_c. | |
| @ Input columns: q8, q9, q10, q11, q12, q13, q14, q15 | |
| @ Output columns: q8, q9, q10, q11, q12, q13, q14, q15 | |
| @ Trashes all NEON registers (and r12) except for: q4 q5 q6 q7 | |
| .macro vc1_inv_trans_8x8_helper add add1beforeshift rshift | |
| @ This actually computes half of t1, t2, t3, t4, as explained below | |
| @ near `tNhalf`. | |
| vmov.i16 q0, #(6 / 2) @ q0 = #6/2 | |
| vshl.i16 q1, q10, #3 @ t3 = 16/2 * src[16] | |
| vshl.i16 q3, q14, #3 @ temp4 = 16/2 * src[48] | |
| vmul.i16 q2, q10, q0 @ t4 = 6/2 * src[16] | |
| vmla.i16 q1, q14, q0 @ t3 += 6/2 * src[48] | |
| @ unused: q0, q10, q14 | |
| vmov.i16 q0, #(12 / 2) @ q0 = #12/2 | |
| vadd.i16 q10, q8, q12 @ temp1 = src[0] + src[32] | |
| vsub.i16 q14, q8, q12 @ temp2 = src[0] - src[32] | |
| @ unused: q8, q12 | |
| vmov.i16 q8, #(\add / 2) @ t1 will accumulate here | |
| vmov.i16 q12, #(\add / 2) @ t2 will accumulate here | |
| movw r12, #15 | |
| vsub.i16 q2, q2, q3 @ t4 = 6/2 * src[16] - 16/2 * src[48] | |
| movt r12, #9 | |
| @ unused: q3 | |
| vmla.i16 q8, q10, q0 @ t1 = 12/2 * temp1 + add | |
| vmla.i16 q12, q14, q0 @ t2 = 12/2 * temp2 + add | |
| vmov.i32 d0[0], r12 | |
| @ unused: q3, q10, q14 | |
| @ At this point: | |
| @ q0 d0=#15|#9 | |
| @ q1 old t3 | |
| @ q2 old t4 | |
| @ q3 | |
| @ q8 old t1 | |
| @ q9 src[8] | |
| @ q10 | |
| @ q11 src[24] | |
| @ q12 old t2 | |
| @ q13 src[40] | |
| @ q14 | |
| @ q15 src[56] | |
| @ unused: q3, q10, q14 | |
| movw r12, #16 | |
| vshl.i16 q3, q9, #4 @ t1 = 16 * src[8] | |
| movt r12, #4 | |
| vshl.i16 q10, q9, #2 @ t4 = 4 * src[8] | |
| vmov.i32 d1[0], r12 | |
| vmul.i16 q14, q9, d0[0] @ t2 = 15 * src[8] | |
| vmul.i16 q9, q9, d0[1] @ t3 = 9 * src[8] | |
| @ unused: none | |
| vmla.i16 q3, q11, d0[0] @ t1 += 15 * src[24] | |
| vmls.i16 q10, q11, d0[1] @ t4 -= 9 * src[24] | |
| vmls.i16 q14, q11, d1[1] @ t2 -= 4 * src[24] | |
| vmls.i16 q9, q11, d1[0] @ t3 -= 16 * src[24] | |
| @ unused: q11 | |
| vmla.i16 q3, q13, d0[1] @ t1 += 9 * src[40] | |
| vmla.i16 q10, q13, d0[0] @ t4 += 15 * src[40] | |
| vmls.i16 q14, q13, d1[0] @ t2 -= 16 * src[40] | |
| vmla.i16 q9, q13, d1[1] @ t3 += 4 * src[40] | |
| @ unused: q11, q13 | |
| @ Compute t5, t6, t7, t8 from old t1, t2, t3, t4. Actually, it computes | |
| @ half of t5, t6, t7, t8 since t1, t2, t3, t4 are halved. | |
| vadd.i16 q11, q8, q1 @ t5 = t1 + t3 | |
| vsub.i16 q1, q8, q1 @ t8 = t1 - t3 | |
| vadd.i16 q13, q12, q2 @ t6 = t2 + t4 | |
| vsub.i16 q2, q12, q2 @ t7 = t2 - t4 | |
| @ unused: q8, q12 | |
| .if \add1beforeshift | |
| vmov.i16 q12, #1 | |
| .endif | |
| @ unused: q8 | |
| vmla.i16 q3, q15, d1[1] @ t1 += 4 * src[56] | |
| vmls.i16 q14, q15, d0[1] @ t2 -= 9 * src[56] | |
| vmla.i16 q9, q15, d0[0] @ t3 += 15 * src[56] | |
| vmls.i16 q10, q15, d1[0] @ t4 -= 16 * src[56] | |
| @ unused: q0, q8, q15 | |
| @ At this point: | |
| @ t1 q3 | |
| @ t2 q14 | |
| @ t3 q9 | |
| @ t4 q10 | |
| @ t5half q11 | |
| @ t6half q13 | |
| @ t7half q2 | |
| @ t8half q1 | |
| @ #1 q12 | |
| @ | |
| @ tNhalf is half of the value of tN (as described in vc1_inv_trans_8x8_c). | |
| @ This is done because sometimes files have input that causes tN + tM to | |
| @ overflow. To avoid this overflow, we compute tNhalf, then compute | |
| @ tNhalf + tM (which doesn't overflow), and then we use vhadd to compute | |
| @ (tNhalf + (tNhalf + tM)) >> 1 which does not overflow because it is | |
| @ one instruction. | |
| @ For each pair of tN and tM, do: | |
| @ lineA = t5half + t1 | |
| @ if add1beforeshift: t1 -= 1 | |
| @ lineA = (t5half + lineA) >> 1 | |
| @ lineB = t5half - t1 | |
| @ lineB = (t5half + lineB) >> 1 | |
| @ lineA >>= rshift - 1 | |
| @ lineB >>= rshift - 1 | |
| vadd.i16 q8, q11, q3 @ q8 = t5half + t1 | |
| .if \add1beforeshift | |
| vsub.i16 q3, q3, q12 @ q3 = t1 - 1 | |
| .endif | |
| vadd.i16 q0, q13, q14 @ q0 = t6half + t2 | |
| .if \add1beforeshift | |
| vsub.i16 q14, q14, q12 @ q14 = t2 - 1 | |
| .endif | |
| vadd.i16 q15, q2, q9 @ q15 = t7half + t3 | |
| .if \add1beforeshift | |
| vsub.i16 q9, q9, q12 @ q9 = t3 - 1 | |
| .endif | |
| @ unused: none | |
| vhadd.s16 q8, q11, q8 @ q8 = (t5half + t5half + t1) >> 1 | |
| vsub.i16 q3, q11, q3 @ q3 = t5half - t1 + 1 | |
| vhadd.s16 q0, q13, q0 @ q0 = (t6half + t6half + t2) >> 1 | |
| vsub.i16 q14, q13, q14 @ q14 = t6half - t2 + 1 | |
| vhadd.s16 q15, q2, q15 @ q15 = (t7half + t7half + t3) >> 1 | |
| vsub.i16 q9, q2, q9 @ q9 = t7half - t3 + 1 | |
| vhadd.s16 q3, q11, q3 @ q3 = (t5half + t5half - t1 + 1) >> 1 | |
| @ unused: q11 | |
| vadd.i16 q11, q1, q10 @ q11 = t8half + t4 | |
| .if \add1beforeshift | |
| vsub.i16 q10, q10, q12 @ q10 = t4 - 1 | |
| .endif | |
| @ unused: q12 | |
| vhadd.s16 q14, q13, q14 @ q14 = (t6half + t6half - t2 + 1) >> 1 | |
| @ unused: q12, q13 | |
| vhadd.s16 q13, q2, q9 @ q9 = (t7half + t7half - t3 + 1) >> 1 | |
| @ unused: q12, q2, q9 | |
| vsub.i16 q10, q1, q10 @ q10 = t8half - t4 + 1 | |
| vhadd.s16 q11, q1, q11 @ q11 = (t8half + t8half + t4) >> 1 | |
| vshr.s16 q8, q8, #(\rshift - 1) @ q8 = line[0] | |
| vhadd.s16 q12, q1, q10 @ q12 = (t8half + t8half - t4 + 1) >> 1 | |
| vshr.s16 q9, q0, #(\rshift - 1) @ q9 = line[1] | |
| vshr.s16 q10, q15, #(\rshift - 1) @ q10 = line[2] | |
| vshr.s16 q11, q11, #(\rshift - 1) @ q11 = line[3] | |
| vshr.s16 q12, q12, #(\rshift - 1) @ q12 = line[4] | |
| vshr.s16 q13, q13, #(\rshift - 1) @ q13 = line[5] | |
| vshr.s16 q14, q14, #(\rshift - 1) @ q14 = line[6] | |
| vshr.s16 q15, q3, #(\rshift - 1) @ q15 = line[7] | |
| .endm | |
| @ (int16_t *block [r0]) | |
| function ff_vc1_inv_trans_8x8_neon, export=1 | |
| vld1.64 {q8-q9}, [r0,:128]! | |
| vld1.64 {q10-q11}, [r0,:128]! | |
| vld1.64 {q12-q13}, [r0,:128]! | |
| vld1.64 {q14-q15}, [r0,:128] | |
| sub r0, r0, #(16 * 2 * 3) @ restore r0 | |
| @ At this point: | |
| @ src[0] q8 | |
| @ src[8] q9 | |
| @ src[16] q10 | |
| @ src[24] q11 | |
| @ src[32] q12 | |
| @ src[40] q13 | |
| @ src[48] q14 | |
| @ src[56] q15 | |
| vc1_inv_trans_8x8_helper add=4, add1beforeshift=0, rshift=3 | |
| @ Transpose result matrix of 8x8 | |
| swap4 d17, d19, d21, d23, d24, d26, d28, d30 | |
| transpose16_4x4 q8, q9, q10, q11, q12, q13, q14, q15 | |
| vc1_inv_trans_8x8_helper add=64, add1beforeshift=1, rshift=7 | |
| vst1.64 {q8-q9}, [r0,:128]! | |
| vst1.64 {q10-q11}, [r0,:128]! | |
| vst1.64 {q12-q13}, [r0,:128]! | |
| vst1.64 {q14-q15}, [r0,:128] | |
| bx lr | |
| endfunc | |
| @ (uint8_t *dest [r0], ptrdiff_t stride [r1], int16_t *block [r2]) | |
| function ff_vc1_inv_trans_8x4_neon, export=1 | |
| vld1.64 {q0-q1}, [r2,:128]! @ load 8 * 4 * 2 = 64 bytes / 16 bytes per quad = 4 quad registers | |
| vld1.64 {q2-q3}, [r2,:128] | |
| transpose16 q0, q1, q2, q3 @ transpose rows to columns | |
| @ At this point: | |
| @ src[0] d0 | |
| @ src[1] d2 | |
| @ src[2] d4 | |
| @ src[3] d6 | |
| @ src[4] d1 | |
| @ src[5] d3 | |
| @ src[6] d5 | |
| @ src[7] d7 | |
| vc1_inv_trans_8x4_helper add=4, add1beforeshift=0, rshift=3 | |
| @ Move output to more standardized registers | |
| vmov d0, d16 | |
| vmov d2, d17 | |
| vmov d4, d18 | |
| vmov d6, d19 | |
| vmov d1, d21 | |
| vmov d3, d20 | |
| vmov d5, d23 | |
| vmov d7, d22 | |
| @ At this point: | |
| @ dst[0] d0 | |
| @ dst[1] d2 | |
| @ dst[2] d4 | |
| @ dst[3] d6 | |
| @ dst[4] d1 | |
| @ dst[5] d3 | |
| @ dst[6] d5 | |
| @ dst[7] d7 | |
| transpose16 q0, q1, q2, q3 @ turn columns into rows | |
| @ At this point: | |
| @ row[0] q0 | |
| @ row[1] q1 | |
| @ row[2] q2 | |
| @ row[3] q3 | |
| vc1_inv_trans_4x8_helper add=64, rshift=7 | |
| @ At this point: | |
| @ line[0].l d0 | |
| @ line[0].h d1 | |
| @ line[1].l d2 | |
| @ line[1].h d3 | |
| @ line[2].l d4 | |
| @ line[2].h d5 | |
| @ line[3].l d6 | |
| @ line[3].h d7 | |
| @ unused registers: q12, q13, q14, q15 | |
| vld1.64 {d28}, [r0,:64], r1 @ read dest | |
| vld1.64 {d29}, [r0,:64], r1 | |
| vld1.64 {d30}, [r0,:64], r1 | |
| vld1.64 {d31}, [r0,:64], r1 | |
| sub r0, r0, r1, lsl #2 @ restore original r0 value | |
| vaddw.u8 q0, q0, d28 @ line[0] += dest[0] | |
| vaddw.u8 q1, q1, d29 @ line[1] += dest[1] | |
| vaddw.u8 q2, q2, d30 @ line[2] += dest[2] | |
| vaddw.u8 q3, q3, d31 @ line[3] += dest[3] | |
| vqmovun.s16 d0, q0 @ line[0] | |
| vqmovun.s16 d1, q1 @ line[1] | |
| vqmovun.s16 d2, q2 @ line[2] | |
| vqmovun.s16 d3, q3 @ line[3] | |
| vst1.64 {d0}, [r0,:64], r1 @ write dest | |
| vst1.64 {d1}, [r0,:64], r1 | |
| vst1.64 {d2}, [r0,:64], r1 | |
| vst1.64 {d3}, [r0,:64] | |
| bx lr | |
| endfunc | |
| @ (uint8_t *dest [r0], ptrdiff_t stride [r1], int16_t *block [r2]) | |
| function ff_vc1_inv_trans_4x8_neon, export=1 | |
| mov r12, #(8 * 2) @ 8 elements per line, each element 2 bytes | |
| vld4.16 {d0[], d2[], d4[], d6[]}, [r2,:64], r12 @ read each column into a q register | |
| vld4.16 {d0[1], d2[1], d4[1], d6[1]}, [r2,:64], r12 | |
| vld4.16 {d0[2], d2[2], d4[2], d6[2]}, [r2,:64], r12 | |
| vld4.16 {d0[3], d2[3], d4[3], d6[3]}, [r2,:64], r12 | |
| vld4.16 {d1[], d3[], d5[], d7[]}, [r2,:64], r12 | |
| vld4.16 {d1[1], d3[1], d5[1], d7[1]}, [r2,:64], r12 | |
| vld4.16 {d1[2], d3[2], d5[2], d7[2]}, [r2,:64], r12 | |
| vld4.16 {d1[3], d3[3], d5[3], d7[3]}, [r2,:64] | |
| vc1_inv_trans_4x8_helper add=4, rshift=3 | |
| @ At this point: | |
| @ dst[0] = q0 | |
| @ dst[1] = q1 | |
| @ dst[2] = q2 | |
| @ dst[3] = q3 | |
| transpose16 q0, q1, q2, q3 @ Transpose rows (registers) into columns | |
| vc1_inv_trans_8x4_helper add=64, add1beforeshift=1, rshift=7 | |
| vld1.32 {d28[]}, [r0,:32], r1 @ read dest | |
| vld1.32 {d28[1]}, [r0,:32], r1 | |
| vld1.32 {d29[]}, [r0,:32], r1 | |
| vld1.32 {d29[1]}, [r0,:32], r1 | |
| vld1.32 {d30[]}, [r0,:32], r1 | |
| vld1.32 {d30[0]}, [r0,:32], r1 | |
| vld1.32 {d31[]}, [r0,:32], r1 | |
| vld1.32 {d31[0]}, [r0,:32], r1 | |
| sub r0, r0, r1, lsl #3 @ restore original r0 value | |
| vaddw.u8 q8, q8, d28 @ line[0,1] += dest[0,1] | |
| vaddw.u8 q9, q9, d29 @ line[2,3] += dest[2,3] | |
| vaddw.u8 q10, q10, d30 @ line[5,4] += dest[5,4] | |
| vaddw.u8 q11, q11, d31 @ line[7,6] += dest[7,6] | |
| vqmovun.s16 d16, q8 @ clip(line[0,1]) | |
| vqmovun.s16 d18, q9 @ clip(line[2,3]) | |
| vqmovun.s16 d20, q10 @ clip(line[5,4]) | |
| vqmovun.s16 d22, q11 @ clip(line[7,6]) | |
| vst1.32 {d16[0]}, [r0,:32], r1 @ write dest | |
| vst1.32 {d16[1]}, [r0,:32], r1 | |
| vst1.32 {d18[0]}, [r0,:32], r1 | |
| vst1.32 {d18[1]}, [r0,:32], r1 | |
| vst1.32 {d20[1]}, [r0,:32], r1 | |
| vst1.32 {d20[0]}, [r0,:32], r1 | |
| vst1.32 {d22[1]}, [r0,:32], r1 | |
| vst1.32 {d22[0]}, [r0,:32] | |
| bx lr | |
| endfunc | |
| @ Setup constants in registers which are used by vc1_inv_trans_4x4_helper | |
| .macro vc1_inv_trans_4x4_helper_setup | |
| vmov.i16 q13, #17 | |
| vmov.i16 q14, #22 | |
| vmov.i16 d30, #10 @ only need double-word, not quad-word | |
| .endm | |
| @ This is modeled after the first for loop in vc1_inv_trans_4x4_c. | |
| .macro vc1_inv_trans_4x4_helper add rshift | |
| vmov.i16 q2, #\add @ t1|t2 will accumulate here | |
| vadd.i16 d16, d0, d1 @ temp1 = src[0] + src[2] | |
| vsub.i16 d17, d0, d1 @ temp2 = src[0] - src[2] | |
| vmul.i16 q3, q14, q1 @ t3|t4 = 22 * (src[1]|src[3]) | |
| vmla.i16 q2, q13, q8 @ t1|t2 = 17 * (temp1|temp2) + add | |
| vmla.i16 d6, d30, d3 @ t3 += 10 * src[3] | |
| vmls.i16 d7, d30, d2 @ t4 -= 10 * src[1] | |
| vadd.i16 q0, q2, q3 @ dst[0,2] = (t1|t2 + t3|t4) | |
| vsub.i16 q1, q2, q3 @ dst[3,1] = (t1|t2 - t3|t4) | |
| vshr.s16 q0, q0, #\rshift @ dst[0,2] >>= rshift | |
| vshr.s16 q1, q1, #\rshift @ dst[3,1] >>= rshift | |
| .endm | |
| @ (uint8_t *dest [r0], ptrdiff_t stride [r1], int16_t *block [r2]) | |
| function ff_vc1_inv_trans_4x4_neon, export=1 | |
| mov r12, #(8 * 2) @ 8 elements per line, each element 2 bytes | |
| vld4.16 {d0[], d1[], d2[], d3[]}, [r2,:64], r12 @ read each column into a register | |
| vld4.16 {d0[1], d1[1], d2[1], d3[1]}, [r2,:64], r12 | |
| vld4.16 {d0[2], d1[2], d2[2], d3[2]}, [r2,:64], r12 | |
| vld4.16 {d0[3], d1[3], d2[3], d3[3]}, [r2,:64] | |
| vswp d1, d2 @ so that we can later access column 1 and column 3 as a single q1 register | |
| vc1_inv_trans_4x4_helper_setup | |
| @ At this point: | |
| @ src[0] = d0 | |
| @ src[1] = d2 | |
| @ src[2] = d1 | |
| @ src[3] = d3 | |
| vc1_inv_trans_4x4_helper add=4, rshift=3 @ compute t1, t2, t3, t4 and combine them into dst[0-3] | |
| @ At this point: | |
| @ dst[0] = d0 | |
| @ dst[1] = d3 | |
| @ dst[2] = d1 | |
| @ dst[3] = d2 | |
| transpose16 d0, d3, d1, d2 @ Transpose rows (registers) into columns | |
| @ At this point: | |
| @ src[0] = d0 | |
| @ src[8] = d3 | |
| @ src[16] = d1 | |
| @ src[24] = d2 | |
| vswp d2, d3 @ so that we can later access column 1 and column 3 in order as a single q1 register | |
| @ At this point: | |
| @ src[0] = d0 | |
| @ src[8] = d2 | |
| @ src[16] = d1 | |
| @ src[24] = d3 | |
| vc1_inv_trans_4x4_helper add=64, rshift=7 @ compute t1, t2, t3, t4 and combine them into dst[0-3] | |
| @ At this point: | |
| @ line[0] = d0 | |
| @ line[1] = d3 | |
| @ line[2] = d1 | |
| @ line[3] = d2 | |
| vld1.32 {d18[]}, [r0,:32], r1 @ read dest | |
| vld1.32 {d19[]}, [r0,:32], r1 | |
| vld1.32 {d18[1]}, [r0,:32], r1 | |
| vld1.32 {d19[0]}, [r0,:32], r1 | |
| sub r0, r0, r1, lsl #2 @ restore original r0 value | |
| vaddw.u8 q0, q0, d18 @ line[0,2] += dest[0,2] | |
| vaddw.u8 q1, q1, d19 @ line[3,1] += dest[3,1] | |
| vqmovun.s16 d0, q0 @ clip(line[0,2]) | |
| vqmovun.s16 d1, q1 @ clip(line[3,1]) | |
| vst1.32 {d0[0]}, [r0,:32], r1 @ write dest | |
| vst1.32 {d1[1]}, [r0,:32], r1 | |
| vst1.32 {d0[1]}, [r0,:32], r1 | |
| vst1.32 {d1[0]}, [r0,:32] | |
| bx lr | |
| endfunc | |
| @ The absolute value of multiplication constants from vc1_mspel_filter and vc1_mspel_{ver,hor}_filter_16bits. | |
| @ The sign is embedded in the code below that carries out the multiplication (mspel_filter{,.16}). | |
| #define MSPEL_MODE_1_MUL_CONSTANTS 4, 53, 18, 3 | |
| #define MSPEL_MODE_2_MUL_CONSTANTS 1, 9, 9, 1 | |
| #define MSPEL_MODE_3_MUL_CONSTANTS 3, 18, 53, 4 | |
| @ These constants are from reading the source code of vc1_mspel_mc and determining the value that | |
| @ is added to `rnd` to result in the variable `r`, and the value of the variable `shift`. | |
| #define MSPEL_MODES_11_ADDSHIFT_CONSTANTS 15, 5 | |
| #define MSPEL_MODES_12_ADDSHIFT_CONSTANTS 3, 3 | |
| #define MSPEL_MODES_13_ADDSHIFT_CONSTANTS 15, 5 | |
| #define MSPEL_MODES_21_ADDSHIFT_CONSTANTS MSPEL_MODES_12_ADDSHIFT_CONSTANTS | |
| #define MSPEL_MODES_22_ADDSHIFT_CONSTANTS 0, 1 | |
| #define MSPEL_MODES_23_ADDSHIFT_CONSTANTS 3, 3 | |
| #define MSPEL_MODES_31_ADDSHIFT_CONSTANTS MSPEL_MODES_13_ADDSHIFT_CONSTANTS | |
| #define MSPEL_MODES_32_ADDSHIFT_CONSTANTS MSPEL_MODES_23_ADDSHIFT_CONSTANTS | |
| #define MSPEL_MODES_33_ADDSHIFT_CONSTANTS 15, 5 | |
| @ The addition and shift constants from vc1_mspel_filter. | |
| #define MSPEL_MODE_1_ADDSHIFT_CONSTANTS 32, 6 | |
| #define MSPEL_MODE_2_ADDSHIFT_CONSTANTS 8, 4 | |
| #define MSPEL_MODE_3_ADDSHIFT_CONSTANTS 32, 6 | |
| @ Setup constants in registers for a subsequent use of mspel_filter{,.16}. | |
| .macro mspel_constants typesize reg_a reg_b reg_c reg_d filter_a filter_b filter_c filter_d reg_add filter_add_register | |
| @ Typesize should be i8 or i16. | |
| @ Only set the register if the value is not 1 and unique | |
| .if \filter_a != 1 | |
| vmov.\typesize \reg_a, #\filter_a @ reg_a = filter_a | |
| .endif | |
| vmov.\typesize \reg_b, #\filter_b @ reg_b = filter_b | |
| .if \filter_b != \filter_c | |
| vmov.\typesize \reg_c, #\filter_c @ reg_c = filter_c | |
| .endif | |
| .if \filter_d != 1 | |
| vmov.\typesize \reg_d, #\filter_d @ reg_d = filter_d | |
| .endif | |
| @ vdup to double the size of typesize | |
| .ifc \typesize,i8 | |
| vdup.16 \reg_add, \filter_add_register @ reg_add = filter_add_register | |
| .else | |
| vdup.32 \reg_add, \filter_add_register @ reg_add = filter_add_register | |
| .endif | |
| .endm | |
| @ After mspel_constants has been used, do the filtering. | |
| .macro mspel_filter acc dest src0 src1 src2 src3 filter_a filter_b filter_c filter_d reg_a reg_b reg_c reg_d reg_add filter_shift narrow=1 | |
| .if \filter_a != 1 | |
| @ If filter_a != 1, then we need a move and subtract instruction | |
| vmov \acc, \reg_add @ acc = reg_add | |
| vmlsl.u8 \acc, \reg_a, \src0 @ acc -= filter_a * src[-stride] | |
| .else | |
| @ If filter_a is 1, then just subtract without an extra move | |
| vsubw.u8 \acc, \reg_add, \src0 @ acc = reg_add - src[-stride] @ since filter_a == 1 | |
| .endif | |
| vmlal.u8 \acc, \reg_b, \src1 @ acc += filter_b * src[0] | |
| .if \filter_b != \filter_c | |
| vmlal.u8 \acc, \reg_c, \src2 @ acc += filter_c * src[stride] | |
| .else | |
| @ If filter_b is the same as filter_c, use the same reg_b register | |
| vmlal.u8 \acc, \reg_b, \src2 @ acc += filter_c * src[stride] @ where filter_c == filter_b | |
| .endif | |
| .if \filter_d != 1 | |
| @ If filter_d != 1, then do a multiply accumulate | |
| vmlsl.u8 \acc, \reg_d, \src3 @ acc -= filter_d * src[stride * 2] | |
| .else | |
| @ If filter_d is 1, then just do a subtract | |
| vsubw.u8 \acc, \acc, \src3 @ acc -= src[stride * 2] @ since filter_d == 1 | |
| .endif | |
| .if \narrow | |
| vqshrun.s16 \dest, \acc, #\filter_shift @ dest = clip_uint8(acc >> filter_shift) | |
| .else | |
| vshr.s16 \dest, \acc, #\filter_shift @ dest = acc >> filter_shift | |
| .endif | |
| .endm | |
| @ This is similar to mspel_filter, but the input is 16-bit instead of 8-bit and narrow=0 is not supported. | |
| .macro mspel_filter.16 acc0 acc1 acc0_0 acc0_1 dest src0 src1 src2 src3 src4 src5 src6 src7 filter_a filter_b filter_c filter_d reg_a reg_b reg_c reg_d reg_add filter_shift | |
| .if \filter_a != 1 | |
| vmov \acc0, \reg_add | |
| vmov \acc1, \reg_add | |
| vmlsl.s16 \acc0, \reg_a, \src0 | |
| vmlsl.s16 \acc1, \reg_a, \src1 | |
| .else | |
| vsubw.s16 \acc0, \reg_add, \src0 | |
| vsubw.s16 \acc1, \reg_add, \src1 | |
| .endif | |
| vmlal.s16 \acc0, \reg_b, \src2 | |
| vmlal.s16 \acc1, \reg_b, \src3 | |
| .if \filter_b != \filter_c | |
| vmlal.s16 \acc0, \reg_c, \src4 | |
| vmlal.s16 \acc1, \reg_c, \src5 | |
| .else | |
| vmlal.s16 \acc0, \reg_b, \src4 | |
| vmlal.s16 \acc1, \reg_b, \src5 | |
| .endif | |
| .if \filter_d != 1 | |
| vmlsl.s16 \acc0, \reg_d, \src6 | |
| vmlsl.s16 \acc1, \reg_d, \src7 | |
| .else | |
| vsubw.s16 \acc0, \acc0, \src6 | |
| vsubw.s16 \acc1, \acc1, \src7 | |
| .endif | |
| @ Use acc0_0 and acc0_1 as temp space | |
| vqshrun.s32 \acc0_0, \acc0, #\filter_shift @ Shift and narrow with saturation from s32 to u16 | |
| vqshrun.s32 \acc0_1, \acc1, #\filter_shift | |
| vqmovn.u16 \dest, \acc0 @ Narrow with saturation from u16 to u8 | |
| .endm | |
| @ Register usage for put_vc1_mspel_mc functions. Registers marked 'hv' are only used in put_vc1_mspel_mc_hv. | |
| @ | |
| @ r0 adjusted dst | |
| @ r1 adjusted src | |
| @ r2 stride | |
| @ r3 adjusted rnd | |
| @ r4 [hv] tmp | |
| @ r11 [hv] sp saved | |
| @ r12 loop counter | |
| @ d0 src[-stride] | |
| @ d1 src[0] | |
| @ d2 src[stride] | |
| @ d3 src[stride * 2] | |
| @ q0 [hv] src[-stride] | |
| @ q1 [hv] src[0] | |
| @ q2 [hv] src[stride] | |
| @ q3 [hv] src[stride * 2] | |
| @ d21 often result from mspel_filter | |
| @ q11 accumulator 0 | |
| @ q12 [hv] accumulator 1 | |
| @ q13 accumulator initial value | |
| @ d28 filter_a | |
| @ d29 filter_b | |
| @ d30 filter_c | |
| @ d31 filter_d | |
| @ (uint8_t *dst [r0], const uint8_t *src [r1], ptrdiff_t stride [r2], int rnd [r3]) | |
| .macro put_vc1_mspel_mc_hv hmode vmode filter_h_a filter_h_b filter_h_c filter_h_d filter_v_a filter_v_b filter_v_c filter_v_d filter_add filter_shift | |
| function ff_put_vc1_mspel_mc\hmode\()\vmode\()_neon, export=1 | |
| push {r4, r11, lr} | |
| mov r11, sp @ r11 = stack pointer before realignmnet | |
| A bic sp, sp, #15 @ sp = round down to multiple of 16 bytes | |
| T bic r4, r11, #15 | |
| T mov sp, r4 | |
| sub sp, sp, #(8*2*16) @ make space for 8 rows * 2 byte per element * 16 elements per row (to fit 11 actual elements per row) | |
| mov r4, sp @ r4 = int16_t tmp[8 * 16] | |
| sub r1, r1, #1 @ src -= 1 | |
| .if \filter_add != 0 | |
| add r3, r3, #\filter_add @ r3 = filter_add + rnd | |
| .endif | |
| mov r12, #8 @ loop counter | |
| sub r1, r1, r2 @ r1 = &src[-stride] @ slide back | |
| @ Do vertical filtering from src into tmp | |
| mspel_constants i8, d28, d29, d30, d31, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, q13, r3 | |
| vld1.64 {d0,d1}, [r1], r2 | |
| vld1.64 {d2,d3}, [r1], r2 | |
| vld1.64 {d4,d5}, [r1], r2 | |
| 1: | |
| subs r12, r12, #4 | |
| vld1.64 {d6,d7}, [r1], r2 | |
| mspel_filter q11, q11, d0, d2, d4, d6, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, d28, d29, d30, d31, q13, \filter_shift, narrow=0 | |
| mspel_filter q12, q12, d1, d3, d5, d7, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, d28, d29, d30, d31, q13, \filter_shift, narrow=0 | |
| vst1.64 {q11,q12}, [r4,:128]! @ store and increment | |
| vld1.64 {d0,d1}, [r1], r2 | |
| mspel_filter q11, q11, d2, d4, d6, d0, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, d28, d29, d30, d31, q13, \filter_shift, narrow=0 | |
| mspel_filter q12, q12, d3, d5, d7, d1, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, d28, d29, d30, d31, q13, \filter_shift, narrow=0 | |
| vst1.64 {q11,q12}, [r4,:128]! @ store and increment | |
| vld1.64 {d2,d3}, [r1], r2 | |
| mspel_filter q11, q11, d4, d6, d0, d2, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, d28, d29, d30, d31, q13, \filter_shift, narrow=0 | |
| mspel_filter q12, q12, d5, d7, d1, d3, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, d28, d29, d30, d31, q13, \filter_shift, narrow=0 | |
| vst1.64 {q11,q12}, [r4,:128]! @ store and increment | |
| vld1.64 {d4,d5}, [r1], r2 | |
| mspel_filter q11, q11, d6, d0, d2, d4, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, d28, d29, d30, d31, q13, \filter_shift, narrow=0 | |
| mspel_filter q12, q12, d7, d1, d3, d5, \filter_v_a, \filter_v_b, \filter_v_c, \filter_v_d, d28, d29, d30, d31, q13, \filter_shift, narrow=0 | |
| vst1.64 {q11,q12}, [r4,:128]! @ store and increment | |
| bne 1b | |
| rsb r3, r3, #(64 + \filter_add) @ r3 = (64 + filter_add) - r3 | |
| mov r12, #8 @ loop counter | |
| mov r4, sp @ r4 = tmp | |
| @ Do horizontal filtering from temp to dst | |
| mspel_constants i16, d28, d29, d30, d31, \filter_h_a, \filter_h_b, \filter_h_c, \filter_h_d, q13, r3 | |
| 2: | |
| subs r12, r12, #1 | |
| vld1.64 {q0,q1}, [r4,:128]! @ read one line of tmp | |
| vext.16 q2, q0, q1, #2 | |
| vext.16 q3, q0, q1, #3 | |
| vext.16 q1, q0, q1, #1 @ do last because it writes to q1 which is read by the other vext instructions | |
| mspel_filter.16 q11, q12, d22, d23, d21, d0, d1, d2, d3, d4, d5, d6, d7, \filter_h_a, \filter_h_b, \filter_h_c, \filter_h_d, d28, d29, d30, d31, q13, 7 | |
| vst1.64 {d21}, [r0,:64], r2 @ store and increment dst | |
| bne 2b | |
| mov sp, r11 | |
| pop {r4, r11, pc} | |
| endfunc | |
| .endm | |
| @ Use C preprocessor and assembler macros to expand to functions for horizontal and vertical filtering. | |
| #define PUT_VC1_MSPEL_MC_HV(hmode, vmode) \ | |
| put_vc1_mspel_mc_hv hmode, vmode, \ | |
| MSPEL_MODE_ ## hmode ## _MUL_CONSTANTS, \ | |
| MSPEL_MODE_ ## vmode ## _MUL_CONSTANTS, \ | |
| MSPEL_MODES_ ## hmode ## vmode ## _ADDSHIFT_CONSTANTS | |
| PUT_VC1_MSPEL_MC_HV(1, 1) | |
| PUT_VC1_MSPEL_MC_HV(1, 2) | |
| PUT_VC1_MSPEL_MC_HV(1, 3) | |
| PUT_VC1_MSPEL_MC_HV(2, 1) | |
| PUT_VC1_MSPEL_MC_HV(2, 2) | |
| PUT_VC1_MSPEL_MC_HV(2, 3) | |
| PUT_VC1_MSPEL_MC_HV(3, 1) | |
| PUT_VC1_MSPEL_MC_HV(3, 2) | |
| PUT_VC1_MSPEL_MC_HV(3, 3) | |
| #undef PUT_VC1_MSPEL_MC_HV | |
| .macro put_vc1_mspel_mc_h_only hmode filter_a filter_b filter_c filter_d filter_add filter_shift | |
| function ff_put_vc1_mspel_mc\hmode\()0_neon, export=1 | |
| rsb r3, r3, #\filter_add @ r3 = filter_add - r = filter_add - rnd | |
| mov r12, #8 @ loop counter | |
| sub r1, r1, #1 @ slide back, using immediate | |
| mspel_constants i8, d28, d29, d30, d31, \filter_a, \filter_b, \filter_c, \filter_d, q13, r3 | |
| 1: | |
| subs r12, r12, #1 | |
| vld1.64 {d0,d1}, [r1], r2 @ read 16 bytes even though we only need 11, also src += stride | |
| vext.8 d2, d0, d1, #2 | |
| vext.8 d3, d0, d1, #3 | |
| vext.8 d1, d0, d1, #1 @ do last because it writes to d1 which is read by the other vext instructions | |
| mspel_filter q11, d21, d0, d1, d2, d3, \filter_a, \filter_b, \filter_c, \filter_d, d28, d29, d30, d31, q13, \filter_shift | |
| vst1.64 {d21}, [r0,:64], r2 @ store and increment dst | |
| bne 1b | |
| bx lr | |
| endfunc | |
| .endm | |
| @ Use C preprocessor and assembler macros to expand to functions for horizontal only filtering. | |
| #define PUT_VC1_MSPEL_MC_H_ONLY(hmode) \ | |
| put_vc1_mspel_mc_h_only hmode, MSPEL_MODE_ ## hmode ## _MUL_CONSTANTS, MSPEL_MODE_ ## hmode ## _ADDSHIFT_CONSTANTS | |
| PUT_VC1_MSPEL_MC_H_ONLY(1) | |
| PUT_VC1_MSPEL_MC_H_ONLY(2) | |
| PUT_VC1_MSPEL_MC_H_ONLY(3) | |
| #undef PUT_VC1_MSPEL_MC_H_ONLY | |
| @ (uint8_t *dst [r0], const uint8_t *src [r1], ptrdiff_t stride [r2], int rnd [r3]) | |
| .macro put_vc1_mspel_mc_v_only vmode filter_a filter_b filter_c filter_d filter_add filter_shift | |
| function ff_put_vc1_mspel_mc0\vmode\()_neon, export=1 | |
| add r3, r3, #\filter_add - 1 @ r3 = filter_add - r = filter_add - (1 - rnd) = filter_add - 1 + rnd | |
| mov r12, #8 @ loop counter | |
| sub r1, r1, r2 @ r1 = &src[-stride] @ slide back | |
| mspel_constants i8, d28, d29, d30, d31, \filter_a, \filter_b, \filter_c, \filter_d, q13, r3 | |
| vld1.64 {d0}, [r1], r2 @ d0 = src[-stride] | |
| vld1.64 {d1}, [r1], r2 @ d1 = src[0] | |
| vld1.64 {d2}, [r1], r2 @ d2 = src[stride] | |
| 1: | |
| subs r12, r12, #4 | |
| vld1.64 {d3}, [r1], r2 @ d3 = src[stride * 2] | |
| mspel_filter q11, d21, d0, d1, d2, d3, \filter_a, \filter_b, \filter_c, \filter_d, d28, d29, d30, d31, q13, \filter_shift | |
| vst1.64 {d21}, [r0,:64], r2 @ store and increment dst | |
| vld1.64 {d0}, [r1], r2 @ d0 = next line | |
| mspel_filter q11, d21, d1, d2, d3, d0, \filter_a, \filter_b, \filter_c, \filter_d, d28, d29, d30, d31, q13, \filter_shift | |
| vst1.64 {d21}, [r0,:64], r2 @ store and increment dst | |
| vld1.64 {d1}, [r1], r2 @ d1 = next line | |
| mspel_filter q11, d21, d2, d3, d0, d1, \filter_a, \filter_b, \filter_c, \filter_d, d28, d29, d30, d31, q13, \filter_shift | |
| vst1.64 {d21}, [r0,:64], r2 @ store and increment dst | |
| vld1.64 {d2}, [r1], r2 @ d2 = next line | |
| mspel_filter q11, d21, d3, d0, d1, d2, \filter_a, \filter_b, \filter_c, \filter_d, d28, d29, d30, d31, q13, \filter_shift | |
| vst1.64 {d21}, [r0,:64], r2 @ store and increment dst | |
| bne 1b | |
| bx lr | |
| endfunc | |
| .endm | |
| @ Use C preprocessor and assembler macros to expand to functions for vertical only filtering. | |
| #define PUT_VC1_MSPEL_MC_V_ONLY(vmode) \ | |
| put_vc1_mspel_mc_v_only vmode, MSPEL_MODE_ ## vmode ## _MUL_CONSTANTS, MSPEL_MODE_ ## vmode ## _ADDSHIFT_CONSTANTS | |
| PUT_VC1_MSPEL_MC_V_ONLY(1) | |
| PUT_VC1_MSPEL_MC_V_ONLY(2) | |
| PUT_VC1_MSPEL_MC_V_ONLY(3) | |
| #undef PUT_VC1_MSPEL_MC_V_ONLY | |
| function ff_put_pixels8x8_neon, export=1 | |
| vld1.64 {d0}, [r1], r2 | |
| vld1.64 {d1}, [r1], r2 | |
| vld1.64 {d2}, [r1], r2 | |
| vld1.64 {d3}, [r1], r2 | |
| vld1.64 {d4}, [r1], r2 | |
| vld1.64 {d5}, [r1], r2 | |
| vld1.64 {d6}, [r1], r2 | |
| vld1.64 {d7}, [r1] | |
| vst1.64 {d0}, [r0,:64], r2 | |
| vst1.64 {d1}, [r0,:64], r2 | |
| vst1.64 {d2}, [r0,:64], r2 | |
| vst1.64 {d3}, [r0,:64], r2 | |
| vst1.64 {d4}, [r0,:64], r2 | |
| vst1.64 {d5}, [r0,:64], r2 | |
| vst1.64 {d6}, [r0,:64], r2 | |
| vst1.64 {d7}, [r0,:64] | |
| bx lr | |
| endfunc | |
| function ff_vc1_inv_trans_8x8_dc_neon, export=1 | |
| ldrsh r2, [r2] @ int dc = block[0]; | |
| vld1.64 {d0}, [r0,:64], r1 | |
| vld1.64 {d1}, [r0,:64], r1 | |
| vld1.64 {d4}, [r0,:64], r1 | |
| vld1.64 {d5}, [r0,:64], r1 | |
| add r2, r2, r2, lsl #1 @ dc = (3 * dc + 1) >> 1; | |
| vld1.64 {d6}, [r0,:64], r1 | |
| add r2, r2, #1 | |
| vld1.64 {d7}, [r0,:64], r1 | |
| vld1.64 {d16}, [r0,:64], r1 | |
| vld1.64 {d17}, [r0,:64], r1 | |
| asr r2, r2, #1 | |
| sub r0, r0, r1, lsl #3 @ restore r0 to original value | |
| add r2, r2, r2, lsl #1 @ dc = (3 * dc + 16) >> 5; | |
| add r2, r2, #16 | |
| asr r2, r2, #5 | |
| vdup.16 q1, r2 @ dc | |
| vaddw.u8 q9, q1, d0 | |
| vaddw.u8 q10, q1, d1 | |
| vaddw.u8 q11, q1, d4 | |
| vaddw.u8 q12, q1, d5 | |
| vqmovun.s16 d0, q9 | |
| vqmovun.s16 d1, q10 | |
| vqmovun.s16 d4, q11 | |
| vst1.64 {d0}, [r0,:64], r1 | |
| vqmovun.s16 d5, q12 | |
| vst1.64 {d1}, [r0,:64], r1 | |
| vaddw.u8 q13, q1, d6 | |
| vst1.64 {d4}, [r0,:64], r1 | |
| vaddw.u8 q14, q1, d7 | |
| vst1.64 {d5}, [r0,:64], r1 | |
| vaddw.u8 q15, q1, d16 | |
| vaddw.u8 q1, q1, d17 @ this destroys q1 | |
| vqmovun.s16 d6, q13 | |
| vqmovun.s16 d7, q14 | |
| vqmovun.s16 d16, q15 | |
| vqmovun.s16 d17, q1 | |
| vst1.64 {d6}, [r0,:64], r1 | |
| vst1.64 {d7}, [r0,:64], r1 | |
| vst1.64 {d16}, [r0,:64], r1 | |
| vst1.64 {d17}, [r0,:64] | |
| bx lr | |
| endfunc | |
| function ff_vc1_inv_trans_8x4_dc_neon, export=1 | |
| ldrsh r2, [r2] @ int dc = block[0]; | |
| vld1.64 {d0}, [r0,:64], r1 | |
| vld1.64 {d1}, [r0,:64], r1 | |
| vld1.64 {d4}, [r0,:64], r1 | |
| vld1.64 {d5}, [r0,:64], r1 | |
| add r2, r2, r2, lsl #1 @ dc = ( 3 * dc + 1) >> 1; | |
| sub r0, r0, r1, lsl #2 @ restore r0 to original value | |
| add r2, r2, #1 | |
| asr r2, r2, #1 | |
| add r2, r2, r2, lsl #4 @ dc = (17 * dc + 64) >> 7; | |
| add r2, r2, #64 | |
| asr r2, r2, #7 | |
| vdup.16 q1, r2 @ dc | |
| vaddw.u8 q3, q1, d0 | |
| vaddw.u8 q8, q1, d1 | |
| vaddw.u8 q9, q1, d4 | |
| vaddw.u8 q10, q1, d5 | |
| vqmovun.s16 d0, q3 | |
| vqmovun.s16 d1, q8 | |
| vqmovun.s16 d4, q9 | |
| vst1.64 {d0}, [r0,:64], r1 | |
| vqmovun.s16 d5, q10 | |
| vst1.64 {d1}, [r0,:64], r1 | |
| vst1.64 {d4}, [r0,:64], r1 | |
| vst1.64 {d5}, [r0,:64] | |
| bx lr | |
| endfunc | |
| function ff_vc1_inv_trans_4x8_dc_neon, export=1 | |
| ldrsh r2, [r2] @ int dc = block[0]; | |
| vld1.32 {d0[]}, [r0,:32], r1 | |
| vld1.32 {d1[]}, [r0,:32], r1 | |
| vld1.32 {d0[1]}, [r0,:32], r1 | |
| vld1.32 {d1[1]}, [r0,:32], r1 | |
| add r2, r2, r2, lsl #4 @ dc = (17 * dc + 4) >> 3; | |
| vld1.32 {d4[]}, [r0,:32], r1 | |
| add r2, r2, #4 | |
| vld1.32 {d5[]}, [r0,:32], r1 | |
| vld1.32 {d4[1]}, [r0,:32], r1 | |
| asr r2, r2, #3 | |
| vld1.32 {d5[1]}, [r0,:32], r1 | |
| add r2, r2, r2, lsl #1 @ dc = (12 * dc + 64) >> 7; | |
| sub r0, r0, r1, lsl #3 @ restore r0 to original value | |
| lsl r2, r2, #2 | |
| add r2, r2, #64 | |
| asr r2, r2, #7 | |
| vdup.16 q1, r2 @ dc | |
| vaddw.u8 q3, q1, d0 | |
| vaddw.u8 q8, q1, d1 | |
| vaddw.u8 q9, q1, d4 | |
| vaddw.u8 q10, q1, d5 | |
| vqmovun.s16 d0, q3 | |
| vst1.32 {d0[0]}, [r0,:32], r1 | |
| vqmovun.s16 d1, q8 | |
| vst1.32 {d1[0]}, [r0,:32], r1 | |
| vqmovun.s16 d4, q9 | |
| vst1.32 {d0[1]}, [r0,:32], r1 | |
| vqmovun.s16 d5, q10 | |
| vst1.32 {d1[1]}, [r0,:32], r1 | |
| vst1.32 {d4[0]}, [r0,:32], r1 | |
| vst1.32 {d5[0]}, [r0,:32], r1 | |
| vst1.32 {d4[1]}, [r0,:32], r1 | |
| vst1.32 {d5[1]}, [r0,:32] | |
| bx lr | |
| endfunc | |
| function ff_vc1_inv_trans_4x4_dc_neon, export=1 | |
| ldrsh r2, [r2] @ int dc = block[0]; | |
| vld1.32 {d0[]}, [r0,:32], r1 | |
| vld1.32 {d1[]}, [r0,:32], r1 | |
| vld1.32 {d0[1]}, [r0,:32], r1 | |
| vld1.32 {d1[1]}, [r0,:32], r1 | |
| add r2, r2, r2, lsl #4 @ dc = (17 * dc + 4) >> 3; | |
| sub r0, r0, r1, lsl #2 @ restore r0 to original value | |
| add r2, r2, #4 | |
| asr r2, r2, #3 | |
| add r2, r2, r2, lsl #4 @ dc = (17 * dc + 64) >> 7; | |
| add r2, r2, #64 | |
| asr r2, r2, #7 | |
| vdup.16 q1, r2 @ dc | |
| vaddw.u8 q2, q1, d0 | |
| vaddw.u8 q3, q1, d1 | |
| vqmovun.s16 d0, q2 | |
| vst1.32 {d0[0]}, [r0,:32], r1 | |
| vqmovun.s16 d1, q3 | |
| vst1.32 {d1[0]}, [r0,:32], r1 | |
| vst1.32 {d0[1]}, [r0,:32], r1 | |
| vst1.32 {d1[1]}, [r0,:32] | |
| bx lr | |
| endfunc | |
| @ VC-1 in-loop deblocking filter for 4 pixel pairs at boundary of vertically-neighbouring blocks | |
| @ On entry: | |
| @ r0 -> top-left pel of lower block | |
| @ r1 = row stride, bytes | |
| @ r2 = PQUANT bitstream parameter | |
| function ff_vc1_v_loop_filter4_neon, export=1 | |
| sub r3, r0, r1, lsl #2 | |
| vldr d0, .Lcoeffs | |
| vld1.32 {d1[0]}, [r0], r1 @ P5 | |
| vld1.32 {d2[0]}, [r3], r1 @ P1 | |
| vld1.32 {d3[0]}, [r3], r1 @ P2 | |
| vld1.32 {d4[0]}, [r0], r1 @ P6 | |
| vld1.32 {d5[0]}, [r3], r1 @ P3 | |
| vld1.32 {d6[0]}, [r0], r1 @ P7 | |
| vld1.32 {d7[0]}, [r3] @ P4 | |
| vld1.32 {d16[0]}, [r0] @ P8 | |
| vshll.u8 q9, d1, #1 @ 2*P5 | |
| vdup.16 d17, r2 @ pq | |
| vshll.u8 q10, d2, #1 @ 2*P1 | |
| vmovl.u8 q11, d3 @ P2 | |
| vmovl.u8 q1, d4 @ P6 | |
| vmovl.u8 q12, d5 @ P3 | |
| vmls.i16 d20, d22, d0[1] @ 2*P1-5*P2 | |
| vmovl.u8 q11, d6 @ P7 | |
| vmls.i16 d18, d2, d0[1] @ 2*P5-5*P6 | |
| vshll.u8 q2, d5, #1 @ 2*P3 | |
| vmovl.u8 q3, d7 @ P4 | |
| vmla.i16 d18, d22, d0[1] @ 2*P5-5*P6+5*P7 | |
| vmovl.u8 q11, d16 @ P8 | |
| vmla.u16 d20, d24, d0[1] @ 2*P1-5*P2+5*P3 | |
| vmovl.u8 q12, d1 @ P5 | |
| vmls.u16 d4, d6, d0[1] @ 2*P3-5*P4 | |
| vmls.u16 d18, d22, d0[0] @ 2*P5-5*P6+5*P7-2*P8 | |
| vsub.i16 d1, d6, d24 @ P4-P5 | |
| vmls.i16 d20, d6, d0[0] @ 2*P1-5*P2+5*P3-2*P4 | |
| vmla.i16 d4, d24, d0[1] @ 2*P3-5*P4+5*P5 | |
| vmls.i16 d4, d2, d0[0] @ 2*P3-5*P4+5*P5-2*P6 | |
| vabs.s16 d2, d1 | |
| vrshr.s16 d3, d18, #3 | |
| vrshr.s16 d5, d20, #3 | |
| vshr.s16 d2, d2, #1 @ clip | |
| vrshr.s16 d4, d4, #3 | |
| vabs.s16 d3, d3 @ a2 | |
| vshr.s16 d1, d1, #8 @ clip_sign | |
| vabs.s16 d5, d5 @ a1 | |
| vceq.i16 d7, d2, #0 @ test clip == 0 | |
| vabs.s16 d16, d4 @ a0 | |
| vshr.s16 d4, d4, #8 @ a0_sign | |
| vcge.s16 d18, d5, d3 @ test a1 >= a2 | |
| vcge.s16 d17, d16, d17 @ test a0 >= pq | |
| vbsl d18, d3, d5 @ a3 | |
| vsub.i16 d1, d1, d4 @ clip_sign - a0_sign | |
| vorr d3, d7, d17 @ test clip == 0 || a0 >= pq | |
| vqsub.u16 d4, d16, d18 @ a0 >= a3 ? a0-a3 : 0 (a0 > a3 in all cases where filtering is enabled, so makes more sense to subtract this way round than the opposite and then taking the abs) | |
| vcge.s16 d5, d18, d16 @ test a3 >= a0 | |
| vmul.i16 d0, d4, d0[1] @ a0 >= a3 ? 5*(a0-a3) : 0 | |
| vorr d4, d3, d5 @ test clip == 0 || a0 >= pq || a3 >= a0 | |
| vmov.32 r0, d4[1] @ move to gp reg | |
| vshr.u16 d0, d0, #3 @ a0 >= a3 ? (5*(a0-a3))>>3 : 0 | |
| vcge.s16 d4, d0, d2 | |
| tst r0, #1 | |
| bne 1f @ none of the 4 pixel pairs should be updated if this one is not filtered | |
| vbsl d4, d2, d0 @ FFMIN(d, clip) | |
| vbic d0, d4, d3 @ set each d to zero if it should not be filtered because clip == 0 || a0 >= pq (a3 > a0 case already zeroed by saturating sub) | |
| vmls.i16 d6, d0, d1 @ invert d depending on clip_sign & a0_sign, or zero it if they match, and accumulate into P4 | |
| vmla.i16 d24, d0, d1 @ invert d depending on clip_sign & a0_sign, or zero it if they match, and accumulate into P5 | |
| vqmovun.s16 d0, q3 | |
| vqmovun.s16 d1, q12 | |
| vst1.32 {d0[0]}, [r3], r1 | |
| vst1.32 {d1[0]}, [r3] | |
| 1: bx lr | |
| endfunc | |
| @ VC-1 in-loop deblocking filter for 4 pixel pairs at boundary of horizontally-neighbouring blocks | |
| @ On entry: | |
| @ r0 -> top-left pel of right block | |
| @ r1 = row stride, bytes | |
| @ r2 = PQUANT bitstream parameter | |
| function ff_vc1_h_loop_filter4_neon, export=1 | |
| sub r3, r0, #4 @ where to start reading | |
| vldr d0, .Lcoeffs | |
| vld1.32 {d2}, [r3], r1 | |
| sub r0, r0, #1 @ where to start writing | |
| vld1.32 {d4}, [r3], r1 | |
| vld1.32 {d3}, [r3], r1 | |
| vld1.32 {d5}, [r3] | |
| vdup.16 d1, r2 @ pq | |
| vtrn.8 q1, q2 | |
| vtrn.16 d2, d3 @ P1, P5, P3, P7 | |
| vtrn.16 d4, d5 @ P2, P6, P4, P8 | |
| vshll.u8 q3, d2, #1 @ 2*P1, 2*P5 | |
| vmovl.u8 q8, d4 @ P2, P6 | |
| vmovl.u8 q9, d3 @ P3, P7 | |
| vmovl.u8 q2, d5 @ P4, P8 | |
| vmls.i16 q3, q8, d0[1] @ 2*P1-5*P2, 2*P5-5*P6 | |
| vshll.u8 q10, d3, #1 @ 2*P3, 2*P7 | |
| vmovl.u8 q1, d2 @ P1, P5 | |
| vmla.i16 q3, q9, d0[1] @ 2*P1-5*P2+5*P3, 2*P5-5*P6+5*P7 | |
| vmls.i16 q3, q2, d0[0] @ 2*P1-5*P2+5*P3-2*P4, 2*P5-5*P6+5*P7-2*P8 | |
| vmov d2, d3 @ needs to be in an even-numbered vector for when we come to narrow it later | |
| vmls.i16 d20, d4, d0[1] @ 2*P3-5*P4 | |
| vmla.i16 d20, d3, d0[1] @ 2*P3-5*P4+5*P5 | |
| vsub.i16 d3, d4, d2 @ P4-P5 | |
| vmls.i16 d20, d17, d0[0] @ 2*P3-5*P4+5*P5-2*P6 | |
| vrshr.s16 q3, q3, #3 | |
| vabs.s16 d5, d3 | |
| vshr.s16 d3, d3, #8 @ clip_sign | |
| vrshr.s16 d16, d20, #3 | |
| vabs.s16 q3, q3 @ a1, a2 | |
| vshr.s16 d5, d5, #1 @ clip | |
| vabs.s16 d17, d16 @ a0 | |
| vceq.i16 d18, d5, #0 @ test clip == 0 | |
| vshr.s16 d16, d16, #8 @ a0_sign | |
| vcge.s16 d19, d6, d7 @ test a1 >= a2 | |
| vcge.s16 d1, d17, d1 @ test a0 >= pq | |
| vsub.i16 d16, d3, d16 @ clip_sign - a0_sign | |
| vbsl d19, d7, d6 @ a3 | |
| vorr d1, d18, d1 @ test clip == 0 || a0 >= pq | |
| vqsub.u16 d3, d17, d19 @ a0 >= a3 ? a0-a3 : 0 (a0 > a3 in all cases where filtering is enabled, so makes more sense to subtract this way round than the opposite and then taking the abs) | |
| vcge.s16 d6, d19, d17 @ test a3 >= a0 @ | |
| vmul.i16 d0, d3, d0[1] @ a0 >= a3 ? 5*(a0-a3) : 0 | |
| vorr d3, d1, d6 @ test clip == 0 || a0 >= pq || a3 >= a0 | |
| vmov.32 r2, d3[1] @ move to gp reg | |
| vshr.u16 d0, d0, #3 @ a0 >= a3 ? (5*(a0-a3))>>3 : 0 | |
| vcge.s16 d3, d0, d5 | |
| tst r2, #1 | |
| bne 1f @ none of the 4 pixel pairs should be updated if this one is not filtered | |
| vbsl d3, d5, d0 @ FFMIN(d, clip) | |
| vbic d0, d3, d1 @ set each d to zero if it should not be filtered because clip == 0 || a0 >= pq (a3 > a0 case already zeroed by saturating sub) | |
| vmla.i16 d2, d0, d16 @ invert d depending on clip_sign & a0_sign, or zero it if they match, and accumulate into P5 | |
| vmls.i16 d4, d0, d16 @ invert d depending on clip_sign & a0_sign, or zero it if they match, and accumulate into P4 | |
| vqmovun.s16 d1, q1 | |
| vqmovun.s16 d0, q2 | |
| vst2.8 {d0[0], d1[0]}, [r0], r1 | |
| vst2.8 {d0[1], d1[1]}, [r0], r1 | |
| vst2.8 {d0[2], d1[2]}, [r0], r1 | |
| vst2.8 {d0[3], d1[3]}, [r0] | |
| 1: bx lr | |
| endfunc | |
| @ VC-1 in-loop deblocking filter for 8 pixel pairs at boundary of vertically-neighbouring blocks | |
| @ On entry: | |
| @ r0 -> top-left pel of lower block | |
| @ r1 = row stride, bytes | |
| @ r2 = PQUANT bitstream parameter | |
| function ff_vc1_v_loop_filter8_neon, export=1 | |
| sub r3, r0, r1, lsl #2 | |
| vldr d0, .Lcoeffs | |
| vld1.32 {d1}, [r0, :64], r1 @ P5 | |
| vld1.32 {d2}, [r3, :64], r1 @ P1 | |
| vld1.32 {d3}, [r3, :64], r1 @ P2 | |
| vld1.32 {d4}, [r0, :64], r1 @ P6 | |
| vld1.32 {d5}, [r3, :64], r1 @ P3 | |
| vld1.32 {d6}, [r0, :64], r1 @ P7 | |
| vshll.u8 q8, d1, #1 @ 2*P5 | |
| vshll.u8 q9, d2, #1 @ 2*P1 | |
| vld1.32 {d7}, [r3, :64] @ P4 | |
| vmovl.u8 q1, d3 @ P2 | |
| vld1.32 {d20}, [r0, :64] @ P8 | |
| vmovl.u8 q11, d4 @ P6 | |
| vdup.16 q12, r2 @ pq | |
| vmovl.u8 q13, d5 @ P3 | |
| vmls.i16 q9, q1, d0[1] @ 2*P1-5*P2 | |
| vmovl.u8 q1, d6 @ P7 | |
| vshll.u8 q2, d5, #1 @ 2*P3 | |
| vmls.i16 q8, q11, d0[1] @ 2*P5-5*P6 | |
| vmovl.u8 q3, d7 @ P4 | |
| vmovl.u8 q10, d20 @ P8 | |
| vmla.i16 q8, q1, d0[1] @ 2*P5-5*P6+5*P7 | |
| vmovl.u8 q1, d1 @ P5 | |
| vmla.i16 q9, q13, d0[1] @ 2*P1-5*P2+5*P3 | |
| vsub.i16 q13, q3, q1 @ P4-P5 | |
| vmls.i16 q2, q3, d0[1] @ 2*P3-5*P4 | |
| vmls.i16 q8, q10, d0[0] @ 2*P5-5*P6+5*P7-2*P8 | |
| vabs.s16 q10, q13 | |
| vshr.s16 q13, q13, #8 @ clip_sign | |
| vmls.i16 q9, q3, d0[0] @ 2*P1-5*P2+5*P3-2*P4 | |
| vshr.s16 q10, q10, #1 @ clip | |
| vmla.i16 q2, q1, d0[1] @ 2*P3-5*P4+5*P5 | |
| vrshr.s16 q8, q8, #3 | |
| vmls.i16 q2, q11, d0[0] @ 2*P3-5*P4+5*P5-2*P6 | |
| vceq.i16 q11, q10, #0 @ test clip == 0 | |
| vrshr.s16 q9, q9, #3 | |
| vabs.s16 q8, q8 @ a2 | |
| vabs.s16 q9, q9 @ a1 | |
| vrshr.s16 q2, q2, #3 | |
| vcge.s16 q14, q9, q8 @ test a1 >= a2 | |
| vabs.s16 q15, q2 @ a0 | |
| vshr.s16 q2, q2, #8 @ a0_sign | |
| vbsl q14, q8, q9 @ a3 | |
| vcge.s16 q8, q15, q12 @ test a0 >= pq | |
| vsub.i16 q2, q13, q2 @ clip_sign - a0_sign | |
| vqsub.u16 q9, q15, q14 @ a0 >= a3 ? a0-a3 : 0 (a0 > a3 in all cases where filtering is enabled, so makes more sense to subtract this way round than the opposite and then taking the abs) | |
| vcge.s16 q12, q14, q15 @ test a3 >= a0 | |
| vorr q8, q11, q8 @ test clip == 0 || a0 >= pq | |
| vmul.i16 q0, q9, d0[1] @ a0 >= a3 ? 5*(a0-a3) : 0 | |
| vorr q9, q8, q12 @ test clip == 0 || a0 >= pq || a3 >= a0 | |
| vshl.i64 q11, q9, #16 | |
| vmov.32 r0, d18[1] @ move to gp reg | |
| vshr.u16 q0, q0, #3 @ a0 >= a3 ? (5*(a0-a3))>>3 : 0 | |
| vmov.32 r2, d19[1] | |
| vshr.s64 q9, q11, #48 | |
| vcge.s16 q11, q0, q10 | |
| vorr q8, q8, q9 | |
| and r0, r0, r2 | |
| vbsl q11, q10, q0 @ FFMIN(d, clip) | |
| tst r0, #1 | |
| bne 1f @ none of the 8 pixel pairs should be updated in this case | |
| vbic q0, q11, q8 @ set each d to zero if it should not be filtered | |
| vmls.i16 q3, q0, q2 @ invert d depending on clip_sign & a0_sign, or zero it if they match, and accumulate into P4 | |
| vmla.i16 q1, q0, q2 @ invert d depending on clip_sign & a0_sign, or zero it if they match, and accumulate into P5 | |
| vqmovun.s16 d0, q3 | |
| vqmovun.s16 d1, q1 | |
| vst1.32 {d0}, [r3, :64], r1 | |
| vst1.32 {d1}, [r3, :64] | |
| 1: bx lr | |
| endfunc | |
| .align 5 | |
| .Lcoeffs: | |
| .quad 0x00050002 | |
| @ VC-1 in-loop deblocking filter for 8 pixel pairs at boundary of horizontally-neighbouring blocks | |
| @ On entry: | |
| @ r0 -> top-left pel of right block | |
| @ r1 = row stride, bytes | |
| @ r2 = PQUANT bitstream parameter | |
| function ff_vc1_h_loop_filter8_neon, export=1 | |
| push {lr} | |
| sub r3, r0, #4 @ where to start reading | |
| vldr d0, .Lcoeffs | |
| vld1.32 {d2}, [r3], r1 @ P1[0], P2[0]... | |
| sub r0, r0, #1 @ where to start writing | |
| vld1.32 {d4}, [r3], r1 | |
| add r12, r0, r1, lsl #2 | |
| vld1.32 {d3}, [r3], r1 | |
| vld1.32 {d5}, [r3], r1 | |
| vld1.32 {d6}, [r3], r1 | |
| vld1.32 {d16}, [r3], r1 | |
| vld1.32 {d7}, [r3], r1 | |
| vld1.32 {d17}, [r3] | |
| vtrn.8 q1, q2 @ P1[0], P1[1], P3[0]... P1[2], P1[3], P3[2]... P2[0], P2[1], P4[0]... P2[2], P2[3], P4[2]... | |
| vdup.16 q9, r2 @ pq | |
| vtrn.16 d2, d3 @ P1[0], P1[1], P1[2], P1[3], P5[0]... P3[0], P3[1], P3[2], P3[3], P7[0]... | |
| vtrn.16 d4, d5 @ P2[0], P2[1], P2[2], P2[3], P6[0]... P4[0], P4[1], P4[2], P4[3], P8[0]... | |
| vtrn.8 q3, q8 @ P1[4], P1[5], P3[4]... P1[6], P1[7], P3[6]... P2[4], P2[5], P4[4]... P2[6], P2[7], P4[6]... | |
| vtrn.16 d6, d7 @ P1[4], P1[5], P1[6], P1[7], P5[4]... P3[4], P3[5], P3[5], P3[7], P7[4]... | |
| vtrn.16 d16, d17 @ P2[4], P2[5], P2[6], P2[7], P6[4]... P4[4], P4[5], P4[6], P4[7], P8[4]... | |
| vtrn.32 d2, d6 @ P1, P5 | |
| vtrn.32 d4, d16 @ P2, P6 | |
| vtrn.32 d3, d7 @ P3, P7 | |
| vtrn.32 d5, d17 @ P4, P8 | |
| vshll.u8 q10, d2, #1 @ 2*P1 | |
| vshll.u8 q11, d6, #1 @ 2*P5 | |
| vmovl.u8 q12, d4 @ P2 | |
| vmovl.u8 q13, d16 @ P6 | |
| vmovl.u8 q14, d3 @ P3 | |
| vmls.i16 q10, q12, d0[1] @ 2*P1-5*P2 | |
| vmovl.u8 q12, d7 @ P7 | |
| vshll.u8 q1, d3, #1 @ 2*P3 | |
| vmls.i16 q11, q13, d0[1] @ 2*P5-5*P6 | |
| vmovl.u8 q2, d5 @ P4 | |
| vmovl.u8 q8, d17 @ P8 | |
| vmla.i16 q11, q12, d0[1] @ 2*P5-5*P6+5*P7 | |
| vmovl.u8 q3, d6 @ P5 | |
| vmla.i16 q10, q14, d0[1] @ 2*P1-5*P2+5*P3 | |
| vsub.i16 q12, q2, q3 @ P4-P5 | |
| vmls.i16 q1, q2, d0[1] @ 2*P3-5*P4 | |
| vmls.i16 q11, q8, d0[0] @ 2*P5-5*P6+5*P7-2*P8 | |
| vabs.s16 q8, q12 | |
| vshr.s16 q12, q12, #8 @ clip_sign | |
| vmls.i16 q10, q2, d0[0] @ 2*P1-5*P2+5*P3-2*P4 | |
| vshr.s16 q8, q8, #1 @ clip | |
| vmla.i16 q1, q3, d0[1] @ 2*P3-5*P4+5*P5 | |
| vrshr.s16 q11, q11, #3 | |
| vmls.i16 q1, q13, d0[0] @ 2*P3-5*P4+5*P5-2*P6 | |
| vceq.i16 q13, q8, #0 @ test clip == 0 | |
| vrshr.s16 q10, q10, #3 | |
| vabs.s16 q11, q11 @ a2 | |
| vabs.s16 q10, q10 @ a1 | |
| vrshr.s16 q1, q1, #3 | |
| vcge.s16 q14, q10, q11 @ test a1 >= a2 | |
| vabs.s16 q15, q1 @ a0 | |
| vshr.s16 q1, q1, #8 @ a0_sign | |
| vbsl q14, q11, q10 @ a3 | |
| vcge.s16 q9, q15, q9 @ test a0 >= pq | |
| vsub.i16 q1, q12, q1 @ clip_sign - a0_sign | |
| vqsub.u16 q10, q15, q14 @ a0 >= a3 ? a0-a3 : 0 (a0 > a3 in all cases where filtering is enabled, so makes more sense to subtract this way round than the opposite and then taking the abs) | |
| vcge.s16 q11, q14, q15 @ test a3 >= a0 | |
| vorr q9, q13, q9 @ test clip == 0 || a0 >= pq | |
| vmul.i16 q0, q10, d0[1] @ a0 >= a3 ? 5*(a0-a3) : 0 | |
| vorr q10, q9, q11 @ test clip == 0 || a0 >= pq || a3 >= a0 | |
| vmov.32 r2, d20[1] @ move to gp reg | |
| vshr.u16 q0, q0, #3 @ a0 >= a3 ? (5*(a0-a3))>>3 : 0 | |
| vmov.32 r3, d21[1] | |
| vcge.s16 q10, q0, q8 | |
| and r14, r2, r3 | |
| vbsl q10, q8, q0 @ FFMIN(d, clip) | |
| tst r14, #1 | |
| bne 2f @ none of the 8 pixel pairs should be updated in this case | |
| vbic q0, q10, q9 @ set each d to zero if it should not be filtered because clip == 0 || a0 >= pq (a3 > a0 case already zeroed by saturating sub) | |
| vmla.i16 q3, q0, q1 @ invert d depending on clip_sign & a0_sign, or zero it if they match, and accumulate into P5 | |
| vmls.i16 q2, q0, q1 @ invert d depending on clip_sign & a0_sign, or zero it if they match, and accumulate into P4 | |
| vqmovun.s16 d1, q3 | |
| vqmovun.s16 d0, q2 | |
| tst r2, #1 | |
| bne 1f @ none of the first 4 pixel pairs should be updated if so | |
| vst2.8 {d0[0], d1[0]}, [r0], r1 | |
| vst2.8 {d0[1], d1[1]}, [r0], r1 | |
| vst2.8 {d0[2], d1[2]}, [r0], r1 | |
| vst2.8 {d0[3], d1[3]}, [r0] | |
| 1: tst r3, #1 | |
| bne 2f @ none of the second 4 pixel pairs should be updated if so | |
| vst2.8 {d0[4], d1[4]}, [r12], r1 | |
| vst2.8 {d0[5], d1[5]}, [r12], r1 | |
| vst2.8 {d0[6], d1[6]}, [r12], r1 | |
| vst2.8 {d0[7], d1[7]}, [r12] | |
| 2: pop {pc} | |
| endfunc | |
| @ VC-1 in-loop deblocking filter for 16 pixel pairs at boundary of vertically-neighbouring blocks | |
| @ On entry: | |
| @ r0 -> top-left pel of lower block | |
| @ r1 = row stride, bytes | |
| @ r2 = PQUANT bitstream parameter | |
| function ff_vc1_v_loop_filter16_neon, export=1 | |
| vpush {d8-d15} | |
| sub r3, r0, r1, lsl #2 | |
| vldr d0, .Lcoeffs | |
| vld1.64 {q1}, [r0, :128], r1 @ P5 | |
| vld1.64 {q2}, [r3, :128], r1 @ P1 | |
| vld1.64 {q3}, [r3, :128], r1 @ P2 | |
| vld1.64 {q4}, [r0, :128], r1 @ P6 | |
| vld1.64 {q5}, [r3, :128], r1 @ P3 | |
| vld1.64 {q6}, [r0, :128], r1 @ P7 | |
| vshll.u8 q7, d2, #1 @ 2*P5[0..7] | |
| vshll.u8 q8, d4, #1 @ 2*P1[0..7] | |
| vld1.64 {q9}, [r3, :128] @ P4 | |
| vmovl.u8 q10, d6 @ P2[0..7] | |
| vld1.64 {q11}, [r0, :128] @ P8 | |
| vmovl.u8 q12, d8 @ P6[0..7] | |
| vdup.16 q13, r2 @ pq | |
| vshll.u8 q2, d5, #1 @ 2*P1[8..15] | |
| vmls.i16 q8, q10, d0[1] @ 2*P1[0..7]-5*P2[0..7] | |
| vshll.u8 q10, d3, #1 @ 2*P5[8..15] | |
| vmovl.u8 q3, d7 @ P2[8..15] | |
| vmls.i16 q7, q12, d0[1] @ 2*P5[0..7]-5*P6[0..7] | |
| vmovl.u8 q4, d9 @ P6[8..15] | |
| vmovl.u8 q14, d10 @ P3[0..7] | |
| vmovl.u8 q15, d12 @ P7[0..7] | |
| vmls.i16 q2, q3, d0[1] @ 2*P1[8..15]-5*P2[8..15] | |
| vshll.u8 q3, d10, #1 @ 2*P3[0..7] | |
| vmls.i16 q10, q4, d0[1] @ 2*P5[8..15]-5*P6[8..15] | |
| vmovl.u8 q6, d13 @ P7[8..15] | |
| vmla.i16 q8, q14, d0[1] @ 2*P1[0..7]-5*P2[0..7]+5*P3[0..7] | |
| vmovl.u8 q14, d18 @ P4[0..7] | |
| vmovl.u8 q9, d19 @ P4[8..15] | |
| vmla.i16 q7, q15, d0[1] @ 2*P5[0..7]-5*P6[0..7]+5*P7[0..7] | |
| vmovl.u8 q15, d11 @ P3[8..15] | |
| vshll.u8 q5, d11, #1 @ 2*P3[8..15] | |
| vmls.i16 q3, q14, d0[1] @ 2*P3[0..7]-5*P4[0..7] | |
| vmla.i16 q2, q15, d0[1] @ 2*P1[8..15]-5*P2[8..15]+5*P3[8..15] | |
| vmovl.u8 q15, d22 @ P8[0..7] | |
| vmovl.u8 q11, d23 @ P8[8..15] | |
| vmla.i16 q10, q6, d0[1] @ 2*P5[8..15]-5*P6[8..15]+5*P7[8..15] | |
| vmovl.u8 q6, d2 @ P5[0..7] | |
| vmovl.u8 q1, d3 @ P5[8..15] | |
| vmls.i16 q5, q9, d0[1] @ 2*P3[8..15]-5*P4[8..15] | |
| vmls.i16 q8, q14, d0[0] @ 2*P1[0..7]-5*P2[0..7]+5*P3[0..7]-2*P4[0..7] | |
| vmls.i16 q7, q15, d0[0] @ 2*P5[0..7]-5*P6[0..7]+5*P7[0..7]-2*P8[0..7] | |
| vsub.i16 q15, q14, q6 @ P4[0..7]-P5[0..7] | |
| vmla.i16 q3, q6, d0[1] @ 2*P3[0..7]-5*P4[0..7]+5*P5[0..7] | |
| vrshr.s16 q8, q8, #3 | |
| vmls.i16 q2, q9, d0[0] @ 2*P1[8..15]-5*P2[8..15]+5*P3[8..15]-2*P4[8..15] | |
| vrshr.s16 q7, q7, #3 | |
| vmls.i16 q10, q11, d0[0] @ 2*P5[8..15]-5*P6[8..15]+5*P7[8..15]-2*P8[8..15] | |
| vabs.s16 q11, q15 | |
| vabs.s16 q8, q8 @ a1[0..7] | |
| vmla.i16 q5, q1, d0[1] @ 2*P3[8..15]-5*P4[8..15]+5*P5[8..15] | |
| vshr.s16 q15, q15, #8 @ clip_sign[0..7] | |
| vrshr.s16 q2, q2, #3 | |
| vmls.i16 q3, q12, d0[0] @ 2*P3[0..7]-5*P4[0..7]+5*P5[0..7]-2*P6[0..7] | |
| vabs.s16 q7, q7 @ a2[0..7] | |
| vrshr.s16 q10, q10, #3 | |
| vsub.i16 q12, q9, q1 @ P4[8..15]-P5[8..15] | |
| vshr.s16 q11, q11, #1 @ clip[0..7] | |
| vmls.i16 q5, q4, d0[0] @ 2*P3[8..15]-5*P4[8..15]+5*P5[8..15]-2*P6[8..15] | |
| vcge.s16 q4, q8, q7 @ test a1[0..7] >= a2[0..7] | |
| vabs.s16 q2, q2 @ a1[8..15] | |
| vrshr.s16 q3, q3, #3 | |
| vabs.s16 q10, q10 @ a2[8..15] | |
| vbsl q4, q7, q8 @ a3[0..7] | |
| vabs.s16 q7, q12 | |
| vshr.s16 q8, q12, #8 @ clip_sign[8..15] | |
| vrshr.s16 q5, q5, #3 | |
| vcge.s16 q12, q2, q10 @ test a1[8..15] >= a2[8.15] | |
| vshr.s16 q7, q7, #1 @ clip[8..15] | |
| vbsl q12, q10, q2 @ a3[8..15] | |
| vabs.s16 q2, q3 @ a0[0..7] | |
| vceq.i16 q10, q11, #0 @ test clip[0..7] == 0 | |
| vshr.s16 q3, q3, #8 @ a0_sign[0..7] | |
| vsub.i16 q3, q15, q3 @ clip_sign[0..7] - a0_sign[0..7] | |
| vcge.s16 q15, q2, q13 @ test a0[0..7] >= pq | |
| vorr q10, q10, q15 @ test clip[0..7] == 0 || a0[0..7] >= pq | |
| vqsub.u16 q15, q2, q4 @ a0[0..7] >= a3[0..7] ? a0[0..7]-a3[0..7] : 0 (a0 > a3 in all cases where filtering is enabled, so makes more sense to subtract this way round than the opposite and then taking the abs) | |
| vcge.s16 q2, q4, q2 @ test a3[0..7] >= a0[0..7] | |
| vabs.s16 q4, q5 @ a0[8..15] | |
| vshr.s16 q5, q5, #8 @ a0_sign[8..15] | |
| vmul.i16 q15, q15, d0[1] @ a0[0..7] >= a3[0..7] ? 5*(a0[0..7]-a3[0..7]) : 0 | |
| vcge.s16 q13, q4, q13 @ test a0[8..15] >= pq | |
| vorr q2, q10, q2 @ test clip[0..7] == 0 || a0[0..7] >= pq || a3[0..7] >= a0[0..7] | |
| vsub.i16 q5, q8, q5 @ clip_sign[8..15] - a0_sign[8..15] | |
| vceq.i16 q8, q7, #0 @ test clip[8..15] == 0 | |
| vshr.u16 q15, q15, #3 @ a0[0..7] >= a3[0..7] ? (5*(a0[0..7]-a3[0..7]))>>3 : 0 | |
| vmov.32 r0, d4[1] @ move to gp reg | |
| vorr q8, q8, q13 @ test clip[8..15] == 0 || a0[8..15] >= pq | |
| vqsub.u16 q13, q4, q12 @ a0[8..15] >= a3[8..15] ? a0[8..15]-a3[8..15] : 0 (a0 > a3 in all cases where filtering is enabled, so makes more sense to subtract this way round than the opposite and then taking the abs) | |
| vmov.32 r2, d5[1] | |
| vcge.s16 q4, q12, q4 @ test a3[8..15] >= a0[8..15] | |
| vshl.i64 q2, q2, #16 | |
| vcge.s16 q12, q15, q11 | |
| vmul.i16 q0, q13, d0[1] @ a0[8..15] >= a3[8..15] ? 5*(a0[8..15]-a3[8..15]) : 0 | |
| vorr q4, q8, q4 @ test clip[8..15] == 0 || a0[8..15] >= pq || a3[8..15] >= a0[8..15] | |
| vshr.s64 q2, q2, #48 | |
| and r0, r0, r2 | |
| vbsl q12, q11, q15 @ FFMIN(d[0..7], clip[0..7]) | |
| vshl.i64 q11, q4, #16 | |
| vmov.32 r2, d8[1] | |
| vshr.u16 q0, q0, #3 @ a0[8..15] >= a3[8..15] ? (5*(a0[8..15]-a3[8..15]))>>3 : 0 | |
| vorr q2, q10, q2 | |
| vmov.32 r12, d9[1] | |
| vshr.s64 q4, q11, #48 | |
| vcge.s16 q10, q0, q7 | |
| vbic q2, q12, q2 @ set each d[0..7] to zero if it should not be filtered because clip[0..7] == 0 || a0[0..7] >= pq (a3 > a0 case already zeroed by saturating sub) | |
| vorr q4, q8, q4 | |
| and r2, r2, r12 | |
| vbsl q10, q7, q0 @ FFMIN(d[8..15], clip[8..15]) | |
| vmls.i16 q14, q2, q3 @ invert d[0..7] depending on clip_sign[0..7] & a0_sign[0..7], or zero it if they match, and accumulate into P4[0..7] | |
| and r0, r0, r2 | |
| vbic q0, q10, q4 @ set each d[8..15] to zero if it should not be filtered because clip[8..15] == 0 || a0[8..15] >= pq (a3 > a0 case already zeroed by saturating sub) | |
| tst r0, #1 | |
| bne 1f @ none of the 16 pixel pairs should be updated in this case | |
| vmla.i16 q6, q2, q3 @ invert d[0..7] depending on clip_sign[0..7] & a0_sign[0..7], or zero it if they match, and accumulate into P5[0..7] | |
| vmls.i16 q9, q0, q5 @ invert d[8..15] depending on clip_sign[8..15] & a0_sign[8..15], or zero it if they match, and accumulate into P4[8..15] | |
| vqmovun.s16 d4, q14 | |
| vmla.i16 q1, q0, q5 @ invert d[8..15] depending on clip_sign[8..15] & a0_sign[8..15], or zero it if they match, and accumulate into P5[8..15] | |
| vqmovun.s16 d0, q6 | |
| vqmovun.s16 d5, q9 | |
| vqmovun.s16 d1, q1 | |
| vst1.64 {q2}, [r3, :128], r1 | |
| vst1.64 {q0}, [r3, :128] | |
| 1: vpop {d8-d15} | |
| bx lr | |
| endfunc | |
| @ VC-1 in-loop deblocking filter for 16 pixel pairs at boundary of horizontally-neighbouring blocks | |
| @ On entry: | |
| @ r0 -> top-left pel of right block | |
| @ r1 = row stride, bytes | |
| @ r2 = PQUANT bitstream parameter | |
| function ff_vc1_h_loop_filter16_neon, export=1 | |
| push {r4-r6,lr} | |
| vpush {d8-d15} | |
| sub r3, r0, #4 @ where to start reading | |
| vldr d0, .Lcoeffs | |
| vld1.32 {d2}, [r3], r1 @ P1[0], P2[0]... | |
| sub r0, r0, #1 @ where to start writing | |
| vld1.32 {d3}, [r3], r1 | |
| add r4, r0, r1, lsl #2 | |
| vld1.32 {d10}, [r3], r1 | |
| vld1.32 {d11}, [r3], r1 | |
| vld1.32 {d16}, [r3], r1 | |
| vld1.32 {d4}, [r3], r1 | |
| vld1.32 {d8}, [r3], r1 | |
| vtrn.8 d2, d3 @ P1[0], P1[1], P3[0]... P2[0], P2[1], P4[0]... | |
| vld1.32 {d14}, [r3], r1 | |
| vld1.32 {d5}, [r3], r1 | |
| vtrn.8 d10, d11 @ P1[2], P1[3], P3[2]... P2[2], P2[3], P4[2]... | |
| vld1.32 {d6}, [r3], r1 | |
| vld1.32 {d12}, [r3], r1 | |
| vtrn.8 d16, d4 @ P1[4], P1[5], P3[4]... P2[4], P2[5], P4[4]... | |
| vld1.32 {d13}, [r3], r1 | |
| vtrn.16 d2, d10 @ P1[0], P1[1], P1[2], P1[3], P5[0]... P3[0], P3[1], P3[2], P3[3], P7[0]... | |
| vld1.32 {d1}, [r3], r1 | |
| vtrn.8 d8, d14 @ P1[6], P1[7], P3[6]... P2[6], P2[7], P4[6]... | |
| vld1.32 {d7}, [r3], r1 | |
| vtrn.16 d3, d11 @ P2[0], P2[1], P2[2], P2[3], P6[0]... P4[0], P4[1], P4[2], P4[3], P8[0]... | |
| vld1.32 {d9}, [r3], r1 | |
| vtrn.8 d5, d6 @ P1[8], P1[9], P3[8]... P2[8], P2[9], P4[8]... | |
| vld1.32 {d15}, [r3] | |
| vtrn.16 d16, d8 @ P1[4], P1[5], P1[6], P1[7], P5[4]... P3[4], P3[5], P3[6], P3[7], P7[4]... | |
| vtrn.16 d4, d14 @ P2[4], P2[5], P2[6], P2[7], P6[4]... P4[4], P4[5], P4[6], P4[7], P8[4]... | |
| vtrn.8 d12, d13 @ P1[10], P1[11], P3[10]... P2[10], P2[11], P4[10]... | |
| vdup.16 q9, r2 @ pq | |
| vtrn.8 d1, d7 @ P1[12], P1[13], P3[12]... P2[12], P2[13], P4[12]... | |
| vtrn.32 d2, d16 @ P1[0..7], P5[0..7] | |
| vtrn.16 d5, d12 @ P1[8], P1[7], P1[10], P1[11], P5[8]... P3[8], P3[9], P3[10], P3[11], P7[8]... | |
| vtrn.16 d6, d13 @ P2[8], P2[7], P2[10], P2[11], P6[8]... P4[8], P4[9], P4[10], P4[11], P8[8]... | |
| vtrn.8 d9, d15 @ P1[14], P1[15], P3[14]... P2[14], P2[15], P4[14]... | |
| vtrn.32 d3, d4 @ P2[0..7], P6[0..7] | |
| vshll.u8 q10, d2, #1 @ 2*P1[0..7] | |
| vtrn.32 d10, d8 @ P3[0..7], P7[0..7] | |
| vshll.u8 q11, d16, #1 @ 2*P5[0..7] | |
| vtrn.32 d11, d14 @ P4[0..7], P8[0..7] | |
| vtrn.16 d1, d9 @ P1[12], P1[13], P1[14], P1[15], P5[12]... P3[12], P3[13], P3[14], P3[15], P7[12]... | |
| vtrn.16 d7, d15 @ P2[12], P2[13], P2[14], P2[15], P6[12]... P4[12], P4[13], P4[14], P4[15], P8[12]... | |
| vmovl.u8 q1, d3 @ P2[0..7] | |
| vmovl.u8 q12, d4 @ P6[0..7] | |
| vtrn.32 d5, d1 @ P1[8..15], P5[8..15] | |
| vtrn.32 d6, d7 @ P2[8..15], P6[8..15] | |
| vtrn.32 d12, d9 @ P3[8..15], P7[8..15] | |
| vtrn.32 d13, d15 @ P4[8..15], P8[8..15] | |
| vmls.i16 q10, q1, d0[1] @ 2*P1[0..7]-5*P2[0..7] | |
| vmovl.u8 q1, d10 @ P3[0..7] | |
| vshll.u8 q2, d5, #1 @ 2*P1[8..15] | |
| vshll.u8 q13, d1, #1 @ 2*P5[8..15] | |
| vmls.i16 q11, q12, d0[1] @ 2*P5[0..7]-5*P6[0..7] | |
| vmovl.u8 q14, d6 @ P2[8..15] | |
| vmovl.u8 q3, d7 @ P6[8..15] | |
| vmovl.u8 q15, d8 @ P7[0..7] | |
| vmla.i16 q10, q1, d0[1] @ 2*P1[0..7]-5*P2[0..7]+5*P3[0..7] | |
| vmovl.u8 q1, d12 @ P3[8..15] | |
| vmls.i16 q2, q14, d0[1] @ 2*P1[8..15]-5*P2[8..15] | |
| vmovl.u8 q4, d9 @ P7[8..15] | |
| vshll.u8 q14, d10, #1 @ 2*P3[0..7] | |
| vmls.i16 q13, q3, d0[1] @ 2*P5[8..15]-5*P6[8..15] | |
| vmovl.u8 q5, d11 @ P4[0..7] | |
| vmla.i16 q11, q15, d0[1] @ 2*P5[0..7]-5*P6[0..7]+5*P7[0..7] | |
| vshll.u8 q15, d12, #1 @ 2*P3[8..15] | |
| vmovl.u8 q6, d13 @ P4[8..15] | |
| vmla.i16 q2, q1, d0[1] @ 2*P1[8..15]-5*P2[8..15]+5*P3[8..15] | |
| vmovl.u8 q1, d14 @ P8[0..7] | |
| vmovl.u8 q7, d15 @ P8[8..15] | |
| vmla.i16 q13, q4, d0[1] @ 2*P5[8..15]-5*P6[8..15]+5*P7[8..15] | |
| vmovl.u8 q4, d16 @ P5[0..7] | |
| vmovl.u8 q8, d1 @ P5[8..15] | |
| vmls.i16 q14, q5, d0[1] @ 2*P3[0..7]-5*P4[0..7] | |
| vmls.i16 q15, q6, d0[1] @ 2*P3[8..15]-5*P4[8..15] | |
| vmls.i16 q10, q5, d0[0] @ 2*P1[0..7]-5*P2[0..7]+5*P3[0..7]-2*P4[0..7] | |
| vmls.i16 q11, q1, d0[0] @ 2*P5[0..7]-5*P6[0..7]+5*P7[0..7]-2*P8[0..7] | |
| vsub.i16 q1, q5, q4 @ P4[0..7]-P5[0..7] | |
| vmls.i16 q2, q6, d0[0] @ 2*P1[8..15]-5*P2[8..15]+5*P3[8..15]-2*P4[8..15] | |
| vrshr.s16 q10, q10, #3 | |
| vmls.i16 q13, q7, d0[0] @ 2*P5[8..15]-5*P6[8..15]+5*P7[8..15]-2*P8[8..15] | |
| vsub.i16 q7, q6, q8 @ P4[8..15]-P5[8..15] | |
| vrshr.s16 q11, q11, #3 | |
| vmla.s16 q14, q4, d0[1] @ 2*P3[0..7]-5*P4[0..7]+5*P5[0..7] | |
| vrshr.s16 q2, q2, #3 | |
| vmla.i16 q15, q8, d0[1] @ 2*P3[8..15]-5*P4[8..15]+5*P5[8..15] | |
| vabs.s16 q10, q10 @ a1[0..7] | |
| vrshr.s16 q13, q13, #3 | |
| vmls.i16 q15, q3, d0[0] @ 2*P3[8..15]-5*P4[8..15]+5*P5[8..15]-2*P6[8..15] | |
| vabs.s16 q3, q11 @ a2[0..7] | |
| vabs.s16 q2, q2 @ a1[8..15] | |
| vmls.i16 q14, q12, d0[0] @ 2*P3[0..7]-5*P4[0..7]+5*P5[0..7]-2*P6[0..7] | |
| vabs.s16 q11, q1 | |
| vabs.s16 q12, q13 @ a2[8..15] | |
| vcge.s16 q13, q10, q3 @ test a1[0..7] >= a2[0..7] | |
| vshr.s16 q1, q1, #8 @ clip_sign[0..7] | |
| vrshr.s16 q15, q15, #3 | |
| vshr.s16 q11, q11, #1 @ clip[0..7] | |
| vrshr.s16 q14, q14, #3 | |
| vbsl q13, q3, q10 @ a3[0..7] | |
| vcge.s16 q3, q2, q12 @ test a1[8..15] >= a2[8.15] | |
| vabs.s16 q10, q15 @ a0[8..15] | |
| vshr.s16 q15, q15, #8 @ a0_sign[8..15] | |
| vbsl q3, q12, q2 @ a3[8..15] | |
| vabs.s16 q2, q14 @ a0[0..7] | |
| vabs.s16 q12, q7 | |
| vshr.s16 q7, q7, #8 @ clip_sign[8..15] | |
| vshr.s16 q14, q14, #8 @ a0_sign[0..7] | |
| vshr.s16 q12, q12, #1 @ clip[8..15] | |
| vsub.i16 q7, q7, q15 @ clip_sign[8..15] - a0_sign[8..15] | |
| vqsub.u16 q15, q10, q3 @ a0[8..15] >= a3[8..15] ? a0[8..15]-a3[8..15] : 0 (a0 > a3 in all cases where filtering is enabled, so makes more sense to subtract this way round than the opposite and then taking the abs) | |
| vcge.s16 q3, q3, q10 @ test a3[8..15] >= a0[8..15] | |
| vcge.s16 q10, q10, q9 @ test a0[8..15] >= pq | |
| vcge.s16 q9, q2, q9 @ test a0[0..7] >= pq | |
| vsub.i16 q1, q1, q14 @ clip_sign[0..7] - a0_sign[0..7] | |
| vqsub.u16 q14, q2, q13 @ a0[0..7] >= a3[0..7] ? a0[0..7]-a3[0..7] : 0 (a0 > a3 in all cases where filtering is enabled, so makes more sense to subtract this way round than the opposite and then taking the abs) | |
| vcge.s16 q2, q13, q2 @ test a3[0..7] >= a0[0..7] | |
| vmul.i16 q13, q15, d0[1] @ a0[8..15] >= a3[8..15] ? 5*(a0[8..15]-a3[8..15]) : 0 | |
| vceq.i16 q15, q11, #0 @ test clip[0..7] == 0 | |
| vmul.i16 q0, q14, d0[1] @ a0[0..7] >= a3[0..7] ? 5*(a0[0..7]-a3[0..7]) : 0 | |
| vorr q9, q15, q9 @ test clip[0..7] == 0 || a0[0..7] >= pq | |
| vceq.i16 q14, q12, #0 @ test clip[8..15] == 0 | |
| vshr.u16 q13, q13, #3 @ a0[8..15] >= a3[8..15] ? (5*(a0[8..15]-a3[8..15]))>>3 : 0 | |
| vorr q2, q9, q2 @ test clip[0..7] == 0 || a0[0..7] >= pq || a3[0..7] >= a0[0..7] | |
| vshr.u16 q0, q0, #3 @ a0[0..7] >= a3[0..7] ? (5*(a0[0..7]-a3[0..7]))>>3 : 0 | |
| vorr q10, q14, q10 @ test clip[8..15] == 0 || a0[8..15] >= pq | |
| vcge.s16 q14, q13, q12 | |
| vmov.32 r2, d4[1] @ move to gp reg | |
| vorr q3, q10, q3 @ test clip[8..15] == 0 || a0[8..15] >= pq || a3[8..15] >= a0[8..15] | |
| vmov.32 r3, d5[1] | |
| vcge.s16 q2, q0, q11 | |
| vbsl q14, q12, q13 @ FFMIN(d[8..15], clip[8..15]) | |
| vbsl q2, q11, q0 @ FFMIN(d[0..7], clip[0..7]) | |
| vmov.32 r5, d6[1] | |
| vbic q0, q14, q10 @ set each d[8..15] to zero if it should not be filtered because clip[8..15] == 0 || a0[8..15] >= pq (a3 > a0 case already zeroed by saturating sub) | |
| vmov.32 r6, d7[1] | |
| and r12, r2, r3 | |
| vbic q2, q2, q9 @ set each d[0..7] to zero if it should not be filtered because clip[0..7] == 0 || a0[0..7] >= pq (a3 > a0 case already zeroed by saturating sub) | |
| vmls.i16 q6, q0, q7 @ invert d[8..15] depending on clip_sign[8..15] & a0_sign[8..15], or zero it if they match, and accumulate into P4 | |
| vmls.i16 q5, q2, q1 @ invert d[0..7] depending on clip_sign[0..7] & a0_sign[0..7], or zero it if they match, and accumulate into P4 | |
| and r14, r5, r6 | |
| vmla.i16 q4, q2, q1 @ invert d[0..7] depending on clip_sign[0..7] & a0_sign[0..7], or zero it if they match, and accumulate into P5 | |
| and r12, r12, r14 | |
| vqmovun.s16 d4, q6 | |
| vmla.i16 q8, q0, q7 @ invert d[8..15] depending on clip_sign[8..15] & a0_sign[8..15], or zero it if they match, and accumulate into P5 | |
| tst r12, #1 | |
| bne 4f @ none of the 16 pixel pairs should be updated in this case | |
| vqmovun.s16 d2, q5 | |
| vqmovun.s16 d3, q4 | |
| vqmovun.s16 d5, q8 | |
| tst r2, #1 | |
| bne 1f | |
| vst2.8 {d2[0], d3[0]}, [r0], r1 | |
| vst2.8 {d2[1], d3[1]}, [r0], r1 | |
| vst2.8 {d2[2], d3[2]}, [r0], r1 | |
| vst2.8 {d2[3], d3[3]}, [r0] | |
| 1: add r0, r4, r1, lsl #2 | |
| tst r3, #1 | |
| bne 2f | |
| vst2.8 {d2[4], d3[4]}, [r4], r1 | |
| vst2.8 {d2[5], d3[5]}, [r4], r1 | |
| vst2.8 {d2[6], d3[6]}, [r4], r1 | |
| vst2.8 {d2[7], d3[7]}, [r4] | |
| 2: add r4, r0, r1, lsl #2 | |
| tst r5, #1 | |
| bne 3f | |
| vst2.8 {d4[0], d5[0]}, [r0], r1 | |
| vst2.8 {d4[1], d5[1]}, [r0], r1 | |
| vst2.8 {d4[2], d5[2]}, [r0], r1 | |
| vst2.8 {d4[3], d5[3]}, [r0] | |
| 3: tst r6, #1 | |
| bne 4f | |
| vst2.8 {d4[4], d5[4]}, [r4], r1 | |
| vst2.8 {d4[5], d5[5]}, [r4], r1 | |
| vst2.8 {d4[6], d5[6]}, [r4], r1 | |
| vst2.8 {d4[7], d5[7]}, [r4] | |
| 4: vpop {d8-d15} | |
| pop {r4-r6,pc} | |
| endfunc | |
| @ Copy at most the specified number of bytes from source to destination buffer, | |
| @ stopping at a multiple of 16 bytes, none of which are the start of an escape sequence | |
| @ On entry: | |
| @ r0 -> source buffer | |
| @ r1 = max number of bytes to copy | |
| @ r2 -> destination buffer, optimally 8-byte aligned | |
| @ On exit: | |
| @ r0 = number of bytes not copied | |
| function ff_vc1_unescape_buffer_helper_neon, export=1 | |
| @ Offset by 48 to screen out cases that are too short for us to handle, | |
| @ and also make it easy to test for loop termination, or to determine | |
| @ whether we need an odd number of half-iterations of the loop. | |
| subs r1, r1, #48 | |
| bmi 90f | |
| @ Set up useful constants | |
| vmov.i32 q0, #0x3000000 | |
| vmov.i32 q1, #0x30000 | |
| tst r1, #16 | |
| bne 1f | |
| vld1.8 {q8, q9}, [r0]! | |
| vbic q12, q8, q0 | |
| vext.8 q13, q8, q9, #1 | |
| vext.8 q14, q8, q9, #2 | |
| vext.8 q15, q8, q9, #3 | |
| veor q12, q12, q1 | |
| vbic q13, q13, q0 | |
| vbic q14, q14, q0 | |
| vbic q15, q15, q0 | |
| vceq.i32 q12, q12, #0 | |
| veor q13, q13, q1 | |
| veor q14, q14, q1 | |
| veor q15, q15, q1 | |
| vceq.i32 q13, q13, #0 | |
| vceq.i32 q14, q14, #0 | |
| vceq.i32 q15, q15, #0 | |
| add r1, r1, #16 | |
| b 3f | |
| 1: vld1.8 {q10, q11}, [r0]! | |
| vbic q12, q10, q0 | |
| vext.8 q13, q10, q11, #1 | |
| vext.8 q14, q10, q11, #2 | |
| vext.8 q15, q10, q11, #3 | |
| veor q12, q12, q1 | |
| vbic q13, q13, q0 | |
| vbic q14, q14, q0 | |
| vbic q15, q15, q0 | |
| vceq.i32 q12, q12, #0 | |
| veor q13, q13, q1 | |
| veor q14, q14, q1 | |
| veor q15, q15, q1 | |
| vceq.i32 q13, q13, #0 | |
| vceq.i32 q14, q14, #0 | |
| vceq.i32 q15, q15, #0 | |
| @ Drop through... | |
| 2: vmov q8, q11 | |
| vld1.8 {q9}, [r0]! | |
| vorr q13, q12, q13 | |
| vorr q15, q14, q15 | |
| vbic q12, q8, q0 | |
| vorr q3, q13, q15 | |
| vext.8 q13, q8, q9, #1 | |
| vext.8 q14, q8, q9, #2 | |
| vext.8 q15, q8, q9, #3 | |
| veor q12, q12, q1 | |
| vorr d6, d6, d7 | |
| vbic q13, q13, q0 | |
| vbic q14, q14, q0 | |
| vbic q15, q15, q0 | |
| vceq.i32 q12, q12, #0 | |
| vmov r3, r12, d6 | |
| veor q13, q13, q1 | |
| veor q14, q14, q1 | |
| veor q15, q15, q1 | |
| vceq.i32 q13, q13, #0 | |
| vceq.i32 q14, q14, #0 | |
| vceq.i32 q15, q15, #0 | |
| orrs r3, r3, r12 | |
| bne 90f | |
| vst1.64 {q10}, [r2]! | |
| 3: vmov q10, q9 | |
| vld1.8 {q11}, [r0]! | |
| vorr q13, q12, q13 | |
| vorr q15, q14, q15 | |
| vbic q12, q10, q0 | |
| vorr q3, q13, q15 | |
| vext.8 q13, q10, q11, #1 | |
| vext.8 q14, q10, q11, #2 | |
| vext.8 q15, q10, q11, #3 | |
| veor q12, q12, q1 | |
| vorr d6, d6, d7 | |
| vbic q13, q13, q0 | |
| vbic q14, q14, q0 | |
| vbic q15, q15, q0 | |
| vceq.i32 q12, q12, #0 | |
| vmov r3, r12, d6 | |
| veor q13, q13, q1 | |
| veor q14, q14, q1 | |
| veor q15, q15, q1 | |
| vceq.i32 q13, q13, #0 | |
| vceq.i32 q14, q14, #0 | |
| vceq.i32 q15, q15, #0 | |
| orrs r3, r3, r12 | |
| bne 91f | |
| vst1.64 {q8}, [r2]! | |
| subs r1, r1, #32 | |
| bpl 2b | |
| 90: add r0, r1, #48 | |
| bx lr | |
| 91: sub r1, r1, #16 | |
| b 90b | |
| endfunc |