| /* | |
| * Quicktime Animation (RLE) Video Encoder | |
| * Copyright (C) 2007 Clemens Fruhwirth | |
| * Copyright (C) 2007 Alexis Ballier | |
| * | |
| * This file is based on flashsvenc.c. | |
| * | |
| * This file is part of FFmpeg. | |
| * | |
| * FFmpeg is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU Lesser General Public | |
| * License as published by the Free Software Foundation; either | |
| * version 2.1 of the License, or (at your option) any later version. | |
| * | |
| * FFmpeg is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| * Lesser General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU Lesser General Public | |
| * License along with FFmpeg; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA | |
| */ | |
| #include "libavutil/imgutils.h" | |
| #include "avcodec.h" | |
| #include "bytestream.h" | |
| #include "codec_internal.h" | |
| #include "encode.h" | |
| /** Maximum RLE code for bulk copy */ | |
| #define MAX_RLE_BULK 127 | |
| /** Maximum RLE code for repeat */ | |
| #define MAX_RLE_REPEAT 128 | |
| /** Maximum RLE code for skip */ | |
| #define MAX_RLE_SKIP 254 | |
| typedef struct QtrleEncContext { | |
| AVCodecContext *avctx; | |
| int pixel_size; | |
| AVFrame *previous_frame; | |
| unsigned int max_buf_size; | |
| int logical_width; | |
| /** | |
| * This array will contain at ith position the value of the best RLE code | |
| * if the line started at pixel i | |
| * There can be 3 values : | |
| * skip (0) : skip as much as possible pixels because they are equal to the | |
| * previous frame ones | |
| * repeat (<-1) : repeat that pixel -rle_code times, still as much as | |
| * possible | |
| * copy (>0) : copy the raw next rle_code pixels */ | |
| signed char *rlecode_table; | |
| /** | |
| * This array will contain the length of the best rle encoding of the line | |
| * starting at ith pixel */ | |
| int *length_table; | |
| /** | |
| * Will contain at ith position the number of consecutive pixels equal to the previous | |
| * frame starting from pixel i */ | |
| uint8_t* skip_table; | |
| /** Encoded frame is a key frame */ | |
| int key_frame; | |
| } QtrleEncContext; | |
| static av_cold int qtrle_encode_end(AVCodecContext *avctx) | |
| { | |
| QtrleEncContext *s = avctx->priv_data; | |
| av_frame_free(&s->previous_frame); | |
| av_free(s->rlecode_table); | |
| av_free(s->length_table); | |
| av_free(s->skip_table); | |
| return 0; | |
| } | |
| static av_cold int qtrle_encode_init(AVCodecContext *avctx) | |
| { | |
| QtrleEncContext *s = avctx->priv_data; | |
| if (av_image_check_size(avctx->width, avctx->height, 0, avctx) < 0) { | |
| return AVERROR(EINVAL); | |
| } | |
| s->avctx=avctx; | |
| s->logical_width=avctx->width; | |
| switch (avctx->pix_fmt) { | |
| case AV_PIX_FMT_GRAY8: | |
| if (avctx->width % 4) { | |
| av_log(avctx, AV_LOG_ERROR, "Width not being a multiple of 4 is not supported\n"); | |
| return AVERROR(EINVAL); | |
| } | |
| s->logical_width = avctx->width / 4; | |
| s->pixel_size = 4; | |
| break; | |
| case AV_PIX_FMT_RGB555BE: | |
| s->pixel_size = 2; | |
| break; | |
| case AV_PIX_FMT_RGB24: | |
| s->pixel_size = 3; | |
| break; | |
| case AV_PIX_FMT_ARGB: | |
| s->pixel_size = 4; | |
| break; | |
| default: | |
| av_log(avctx, AV_LOG_ERROR, "Unsupported colorspace.\n"); | |
| break; | |
| } | |
| avctx->bits_per_coded_sample = avctx->pix_fmt == AV_PIX_FMT_GRAY8 ? 40 : s->pixel_size*8; | |
| s->rlecode_table = av_mallocz(s->logical_width); | |
| s->skip_table = av_mallocz(s->logical_width); | |
| s->length_table = av_calloc(s->logical_width + 1, sizeof(*s->length_table)); | |
| if (!s->skip_table || !s->length_table || !s->rlecode_table) { | |
| av_log(avctx, AV_LOG_ERROR, "Error allocating memory.\n"); | |
| return AVERROR(ENOMEM); | |
| } | |
| s->previous_frame = av_frame_alloc(); | |
| if (!s->previous_frame) { | |
| av_log(avctx, AV_LOG_ERROR, "Error allocating picture\n"); | |
| return AVERROR(ENOMEM); | |
| } | |
| s->max_buf_size = s->logical_width*s->avctx->height*s->pixel_size*2 /* image base material */ | |
| + 15 /* header + footer */ | |
| + s->avctx->height*2 /* skip code+rle end */ | |
| + s->logical_width/MAX_RLE_BULK + 1 /* rle codes */; | |
| return 0; | |
| } | |
| /** | |
| * Compute the best RLE sequence for a line | |
| */ | |
| static void qtrle_encode_line(QtrleEncContext *s, const AVFrame *p, int line, uint8_t **buf) | |
| { | |
| int width=s->logical_width; | |
| int i; | |
| signed char rlecode; | |
| /* This will be the number of pixels equal to the previous frame one's | |
| * starting from the ith pixel */ | |
| unsigned int skipcount; | |
| /* This will be the number of consecutive equal pixels in the current | |
| * frame, starting from the ith one also */ | |
| unsigned int av_uninit(repeatcount); | |
| /* The cost of the three different possibilities */ | |
| int total_skip_cost; | |
| int total_repeat_cost; | |
| int base_bulk_cost; | |
| int lowest_bulk_cost; | |
| int lowest_bulk_cost_index; | |
| int sec_lowest_bulk_cost; | |
| int sec_lowest_bulk_cost_index; | |
| const uint8_t *this_line = p->data[0] + line * p->linesize[0] + width * s->pixel_size; | |
| /* There might be no earlier frame if the current frame is a keyframe. | |
| * So just use a pointer to the current frame to avoid a check | |
| * to avoid NULL - s->pixel_size (which is undefined behaviour). */ | |
| const uint8_t *prev_line = s->key_frame ? this_line | |
| : s->previous_frame->data[0] | |
| + line * s->previous_frame->linesize[0] | |
| + width * s->pixel_size; | |
| s->length_table[width] = 0; | |
| skipcount = 0; | |
| /* Initial values */ | |
| lowest_bulk_cost = INT_MAX / 2; | |
| lowest_bulk_cost_index = width; | |
| sec_lowest_bulk_cost = INT_MAX / 2; | |
| sec_lowest_bulk_cost_index = width; | |
| base_bulk_cost = 1 + s->pixel_size; | |
| for (i = width - 1; i >= 0; i--) { | |
| int prev_bulk_cost; | |
| this_line -= s->pixel_size; | |
| prev_line -= s->pixel_size; | |
| /* If our lowest bulk cost index is too far away, replace it | |
| * with the next lowest bulk cost */ | |
| if (FFMIN(width, i + MAX_RLE_BULK) < lowest_bulk_cost_index) { | |
| lowest_bulk_cost = sec_lowest_bulk_cost; | |
| lowest_bulk_cost_index = sec_lowest_bulk_cost_index; | |
| sec_lowest_bulk_cost = INT_MAX / 2; | |
| sec_lowest_bulk_cost_index = width; | |
| } | |
| /* Deal with the first pixel's bulk cost */ | |
| if (!i) { | |
| base_bulk_cost++; | |
| lowest_bulk_cost++; | |
| sec_lowest_bulk_cost++; | |
| } | |
| /* Look at the bulk cost of the previous loop and see if it is | |
| * a new lower bulk cost */ | |
| prev_bulk_cost = s->length_table[i + 1] + base_bulk_cost; | |
| if (prev_bulk_cost <= sec_lowest_bulk_cost) { | |
| /* If it's lower than the 2nd lowest, then it may be lower | |
| * than the lowest */ | |
| if (prev_bulk_cost <= lowest_bulk_cost) { | |
| /* If we have found a new lowest bulk cost, | |
| * then the 2nd lowest bulk cost is now farther than the | |
| * lowest bulk cost, and will never be used */ | |
| sec_lowest_bulk_cost = INT_MAX / 2; | |
| lowest_bulk_cost = prev_bulk_cost; | |
| lowest_bulk_cost_index = i + 1; | |
| } else { | |
| /* Then it must be the 2nd lowest bulk cost */ | |
| sec_lowest_bulk_cost = prev_bulk_cost; | |
| sec_lowest_bulk_cost_index = i + 1; | |
| } | |
| } | |
| if (!s->key_frame && !memcmp(this_line, prev_line, s->pixel_size)) | |
| skipcount = FFMIN(skipcount + 1, MAX_RLE_SKIP); | |
| else | |
| skipcount = 0; | |
| total_skip_cost = s->length_table[i + skipcount] + 2; | |
| s->skip_table[i] = skipcount; | |
| if (i < width - 1 && !memcmp(this_line, this_line + s->pixel_size, s->pixel_size)) | |
| repeatcount = FFMIN(repeatcount + 1, MAX_RLE_REPEAT); | |
| else | |
| repeatcount = 1; | |
| total_repeat_cost = s->length_table[i + repeatcount] + 1 + s->pixel_size; | |
| /* skip code is free for the first pixel, it costs one byte for repeat and bulk copy | |
| * so let's make it aware */ | |
| if (i == 0) { | |
| total_skip_cost--; | |
| total_repeat_cost++; | |
| } | |
| if (repeatcount > 1 && (skipcount == 0 || total_repeat_cost < total_skip_cost)) { | |
| /* repeat is the best */ | |
| s->length_table[i] = total_repeat_cost; | |
| s->rlecode_table[i] = -repeatcount; | |
| } | |
| else if (skipcount > 0) { | |
| /* skip is the best choice here */ | |
| s->length_table[i] = total_skip_cost; | |
| s->rlecode_table[i] = 0; | |
| } | |
| else { | |
| /* We cannot do neither skip nor repeat | |
| * thus we use the best bulk copy */ | |
| s->length_table[i] = lowest_bulk_cost; | |
| s->rlecode_table[i] = lowest_bulk_cost_index - i; | |
| } | |
| /* These bulk costs increase every iteration */ | |
| lowest_bulk_cost += s->pixel_size; | |
| sec_lowest_bulk_cost += s->pixel_size; | |
| } | |
| /* Good! Now we have the best sequence for this line, let's output it. */ | |
| /* We do a special case for the first pixel so that we avoid testing it in | |
| * the whole loop */ | |
| i=0; | |
| this_line = p-> data[0] + line*p->linesize[0]; | |
| if (s->rlecode_table[0] == 0) { | |
| bytestream_put_byte(buf, s->skip_table[0] + 1); | |
| i += s->skip_table[0]; | |
| } | |
| else bytestream_put_byte(buf, 1); | |
| while (i < width) { | |
| rlecode = s->rlecode_table[i]; | |
| bytestream_put_byte(buf, rlecode); | |
| if (rlecode == 0) { | |
| /* Write a skip sequence */ | |
| bytestream_put_byte(buf, s->skip_table[i] + 1); | |
| i += s->skip_table[i]; | |
| } | |
| else if (rlecode > 0) { | |
| /* bulk copy */ | |
| if (s->avctx->pix_fmt == AV_PIX_FMT_GRAY8) { | |
| int j; | |
| // QT grayscale colorspace has 0=white and 255=black, we will | |
| // ignore the palette that is included in the AVFrame because | |
| // AV_PIX_FMT_GRAY8 has defined color mapping | |
| for (j = 0; j < rlecode*s->pixel_size; ++j) | |
| bytestream_put_byte(buf, *(this_line + i*s->pixel_size + j) ^ 0xff); | |
| } else { | |
| bytestream_put_buffer(buf, this_line + i*s->pixel_size, rlecode*s->pixel_size); | |
| } | |
| i += rlecode; | |
| } | |
| else { | |
| /* repeat the bits */ | |
| if (s->avctx->pix_fmt == AV_PIX_FMT_GRAY8) { | |
| int j; | |
| // QT grayscale colorspace has 0=white and 255=black, ... | |
| for (j = 0; j < s->pixel_size; ++j) | |
| bytestream_put_byte(buf, *(this_line + i*s->pixel_size + j) ^ 0xff); | |
| } else { | |
| bytestream_put_buffer(buf, this_line + i*s->pixel_size, s->pixel_size); | |
| } | |
| i -= rlecode; | |
| } | |
| } | |
| bytestream_put_byte(buf, -1); // end RLE line | |
| } | |
| /** Encode frame including header */ | |
| static int encode_frame(QtrleEncContext *s, const AVFrame *p, uint8_t *buf) | |
| { | |
| int i; | |
| int start_line = 0; | |
| int end_line = s->avctx->height; | |
| uint8_t *orig_buf = buf; | |
| if (!s->key_frame) { | |
| unsigned line_size = s->logical_width * s->pixel_size; | |
| for (start_line = 0; start_line < s->avctx->height; start_line++) | |
| if (memcmp(p->data[0] + start_line*p->linesize[0], | |
| s->previous_frame->data[0] + start_line * s->previous_frame->linesize[0], | |
| line_size)) | |
| break; | |
| for (end_line=s->avctx->height; end_line > start_line; end_line--) | |
| if (memcmp(p->data[0] + (end_line - 1)*p->linesize[0], | |
| s->previous_frame->data[0] + (end_line - 1) * s->previous_frame->linesize[0], | |
| line_size)) | |
| break; | |
| } | |
| bytestream_put_be32(&buf, 0); // CHUNK SIZE, patched later | |
| if ((start_line == 0 && end_line == s->avctx->height) || start_line == s->avctx->height) | |
| bytestream_put_be16(&buf, 0); // header | |
| else { | |
| bytestream_put_be16(&buf, 8); // header | |
| bytestream_put_be16(&buf, start_line); // starting line | |
| bytestream_put_be16(&buf, 0); // unknown | |
| bytestream_put_be16(&buf, end_line - start_line); // lines to update | |
| bytestream_put_be16(&buf, 0); // unknown | |
| } | |
| for (i = start_line; i < end_line; i++) | |
| qtrle_encode_line(s, p, i, &buf); | |
| bytestream_put_byte(&buf, 0); // zero skip code = frame finished | |
| AV_WB32(orig_buf, buf - orig_buf); // patch the chunk size | |
| return buf - orig_buf; | |
| } | |
| static int qtrle_encode_frame(AVCodecContext *avctx, AVPacket *pkt, | |
| const AVFrame *pict, int *got_packet) | |
| { | |
| QtrleEncContext * const s = avctx->priv_data; | |
| int ret; | |
| if ((ret = ff_alloc_packet(avctx, pkt, s->max_buf_size)) < 0) | |
| return ret; | |
| if (avctx->gop_size == 0 || !s->previous_frame->data[0] || | |
| (s->avctx->frame_num % avctx->gop_size) == 0) { | |
| /* I-Frame */ | |
| s->key_frame = 1; | |
| } else { | |
| /* P-Frame */ | |
| s->key_frame = 0; | |
| } | |
| pkt->size = encode_frame(s, pict, pkt->data); | |
| /* save the current frame */ | |
| ret = av_frame_replace(s->previous_frame, pict); | |
| if (ret < 0) { | |
| av_log(avctx, AV_LOG_ERROR, "cannot add reference\n"); | |
| return ret; | |
| } | |
| if (s->key_frame) | |
| pkt->flags |= AV_PKT_FLAG_KEY; | |
| *got_packet = 1; | |
| return 0; | |
| } | |
| const FFCodec ff_qtrle_encoder = { | |
| .p.name = "qtrle", | |
| CODEC_LONG_NAME("QuickTime Animation (RLE) video"), | |
| .p.type = AVMEDIA_TYPE_VIDEO, | |
| .p.id = AV_CODEC_ID_QTRLE, | |
| .p.capabilities = AV_CODEC_CAP_DR1 | AV_CODEC_CAP_ENCODER_REORDERED_OPAQUE, | |
| .priv_data_size = sizeof(QtrleEncContext), | |
| .init = qtrle_encode_init, | |
| FF_CODEC_ENCODE_CB(qtrle_encode_frame), | |
| .close = qtrle_encode_end, | |
| .p.pix_fmts = (const enum AVPixelFormat[]){ | |
| AV_PIX_FMT_RGB24, AV_PIX_FMT_RGB555BE, AV_PIX_FMT_ARGB, AV_PIX_FMT_GRAY8, AV_PIX_FMT_NONE | |
| }, | |
| .caps_internal = FF_CODEC_CAP_INIT_CLEANUP, | |
| }; |