README - socat - Git at Google


 about
 -----

 socat is a relay for bidirectional data transfer between two independent data
 channels. Each of these data channels may be a file, pipe, device (serial line
 etc. or a pseudo terminal), a socket (UNIX, IP4, IP6 - raw, UDP, TCP), an
 SSL socket, proxy CONNECT connection, a file descriptor (stdin etc.), the GNU
 line editor (readline), a program, or a combination of two of these.
 These modes include generation of "listening" sockets, named pipes, and pseudo
 terminals.

 socat can be used, e.g., as TCP port forwarder (one-shot or daemon), as an
 external socksifier, for attacking weak firewalls, as a shell interface to UNIX
 sockets, IP6 relay, for redirecting TCP oriented programs to a serial line, to
 logically connect serial lines on different computers, or to establish a
 relatively secure environment (su and  chroot) for running client or server
 shell scripts with network connections.

 Many options are available to refine socats behaviour:
 terminal parameters, open() options, file permissions, file and process owners,
 basic socket options like bind address, advanced socket options like IP source
 routing, linger, TTL, TOS (type of service), or TCP performance tuning.

 More capabilities, like daemon mode with forking, client address check,
 "tail -f" mode, some stream data processing (line terminator conversion),
 choosing sockets, pipes, or ptys for interprocess communication, debug and
 trace options, logging to syslog, stderr or file, and last but not least
 precise error messages make it a versatile tool for many different purposes.

 In fact, many of these features already exist in specialized tools; but until
 now, there does not seem to exists another tool that provides such a generic,
 flexible, simple and almost comprehensive (UNIX) byte stream connector.


 packages
 --------

 before bothering with compilers, dependencies and include files, you might
 try to get a binary distribution that matches your platform. Have a look at
 the projects home page for actual information regarding socat binary
 distributions.


 platforms
 ---------

 socat 1.7.0 was compiled and more or less successfully tested under the
 following operating systems:

 Debian lenny/sid on x86, kernel 2.6.24
 FreeBSD 6.1 on x86
 NetBSD 4.0  on x86
 OpenBSD 4.3 on x86
 OpenSolaris 10 on x86 with gcc
 Mac OS X 10.5.5 on iMac G5, with libreadline
 HP-UX 11.23
 AIX 5.3 on 64bit Power4 with gcc
 Cygwin 1.5.25 on i686

 tests on Tru64 can no longer be performed because HP testdrive has taken down
 these hosts.

 Some versions of socat have been reported to successfully compile under older
 Linux versions back to RedHat 2.1 (kernel 1.2.13, gcc 2.7.0), under AIX 4.1 and
 4.3, SunOS 5.7-5.8, FreeBSD 4.2 - 4.9, MacOS X 10.1, Cygwin, Solaris 8 on x86,
 OSR 5.0.6, NetBSD 1.6.1 and 2.0.2, OpenBSD 3.4 and 3.8, Tru64 5.1B, Mac OS X
 10.1-10.2, and HP-UX 11

 It might well compile and run under other UNIX like operating systems.


 install
 -------

 Get the tarball and extract it:
 	tar xzf socat.tar.gz
 	cd socat-1.7.4.5
 	./configure
 	make
 	su
 	make install	# installs socat, filan, and procan in /usr/local/bin

 For compiling socat, gcc (or egc) is recommended.
 If gcc is not available, the configure script will fail to determine
 some features; then you'd better begin with one of the Makefiles and config.h's
 from the Config directory.

 If you have problems with the OpenSSL library, you can apply the option
 "--disable-openssl" to configure.

 If you have problems with the readline library or (n)curses, you can apply the
 option "--disable-readline" to configure.

 If you have problems with the tcp wrappers library, you can apply the option
 "--disable-libwrap" to configure.

 If you still get errors or a tremendous amount of warnings you can exclude
 the features for system call tracing and file descriptor analyzing by
 applying the options "--disable-sycls --disable-filan" to configure.

 You still need the functions vsnprintf and snprintf that are in the GNU libc,
 but might not be available with some proprietary libc's.

 The configure script looks for headers and libraries of openssl, readline, and
 tcp wrappers in the OS'es standard places and in the subdirectories include/
 and lib/ of the following places:
    /sw/
    /usr/local/
    /opt/freeware/
    /usr/sfw/
 and for openssl also in:
    /usr/local/ssl/
 In case of unexpected behaviour it is important to understand that configure
 first searches for the appropriate include file and then expects to find the
 library in the associated lib directory. That means, when e.g. a OpenSSL
 installation resides under /usr/local and there is a symbolic link from
 /usr/include/ssl/ssl.h to /usr/local/ssl/include/ssl/ssl.h, configure will find
 the /usr/include/... header and will therefore expect libssl in /usr/lib
 instead of /usr/local/...

 If configure does not find a header file or library but you know where it is,
 you can specify additional search locations, e.g.:
    export LIBS="-L$HOME/lib"
    export CPPFLAGS="-I$HOME/include"
 before running configure and make.

 For other operating systems, if socat does not compile without errors, refer to
 the file PORTING.


 platform specifics - Debian (Ubuntu, ...)
 -----------------------------------------

 libssl-dev


 platform specifics - redhat
 ---------------------------

 Install the following packages before building socat:
   tcp_wrappers-devel
   readline-devel
   openssl-devel

 On RedHat Linux 9.0, including openssl/ssl.h might fail due to problems with
 the krb5-devel package. configure reacts with disabling openssl integration.
 To solve this issue, help cpp to find the krb5.h include file:
 CPPFLAGS="-I/usr/kerberos/include" ./configure


 platform specifics - aix
 ------------------------

 The flock() prototype is not available but the function is. Thus, to enable the
 socat flock options, run configure and then change in config.h the line
 /* #undef HAVE_FLOCK */
 to
 #define HAVE_FLOCK 1
 and continue the build process.

 When using the OpenSSL rpm provided by IBM, configure might need the
 environment variable setting:
 LIBS="-L/opt/freeware/lib"

 When using the OpenSSL bundle provided by IBM, egd needs to be installed too
 to get enough entropy.

 socat compiles not only with gcc, but also with xlc. Just adapt the Makefile:
 replace gcc by /usr/vac/bin/xlc and remove gcc specific options
 "-Wall -Wno-parentheses".

 When linking with the OpenSSL library provided by IBM, errors may occur:
 ld: 0711-317 ERROR: Undefined symbol: .__umoddi3
 In this case, you need to link with libgcc or compile libcrypt yourself using
 xlc, or disable SSL (in config.h, undefine WITH_OPENSSL and recompile)

 The score of test.sh can be improved by uncommenting MISCDELAY=1 in this
 script.


 platform specifics - solaris
 ----------------------------

 If libreadline or libssl are in a directory not searched by the loader per
 default, e.g. /opt/sfw/lib, you must add this directory to $LD_LIBRARY_PATH,
 for running both configure and the socat executables, e.g.:
 export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/sfw/lib

 For some shell scripts, it is preferable to have /usr/xpg4/bin at a prominent
 position in $PATH.

 With the default compiler define _GNU_SOURCE, the CMSG_* macros are not
 available, and therefore ancillary messages cannot be used. To enable these try
 the following:
 After running ./configure, edit Makefile and replace "-D_GNU_SOURCE" with
 "-D_XPG4_2 -D__EXTENSIONS__" and run make


 platform specifics - hp-ux
 --------------------------

 Ancillary messages cannot be compiled in with socat: both struct msghdr and
 struct cmsghdr are required. Compiling with -D_XOPEN_SOURCE_EXTENDED provides
 struct msghdr but disables struct cmsghdr while -D_OPEN_SOURCE disables struct
 msghdr but disables struct cmsghdr. Please contact socat development if you
 know a solution.

 Shutting down the write channel of a UNIX domain socket does not seem to
 trigger an EOF on the peer socket. This makes problems with the exec and
 system addresses.

 This OS provides the type "long long", but not the strtoll() function to read
 data into a long long variable.

 UNIX domain sockets are only supported with SOCK_STREAM, not with datagrams
 (see man 7 unix).

 With UDP sockets it seems to happen that the select() call reports available
 data (or EOF) but a subsequent read() call hangs.


 platform specifics - tru64
 --------------------------

 When the use of the readline address fails with an error like:
 socat: /sbin/loader: Fatal Error: Reference to unresolvable symbol "tgetent" in ".../libreadline.so.4"
 and you still want to use shared libraries, try the following workaround:
 $ make distclean; LIBS="-static" ./configure
 remove the "-static" occurrence in Makefile
 $ make


 documentation
 -------------

 These files reside in the doc subdirectory:

 socat.1 is the man page, socat.html is the HTML based man page. It is actual,
 but describes only the more useful options.

 doc/socat-openssltunnel.html is a simple tutorial for a private SSL connection.
 doc/socat-multicast.html is a short tutorial for multicast and broadcast
 communications.
 doc/socat-tun shows how to build a virtual network between two hosts.

 socat.1 and socat.html can be generated from socat.yo (which is released with
 socat 1.6.0.1 and later) using the yodl document language package. Maintenance
 of yodl had been discontinued by its author
 (http://www.xs4all.nl/~jantien/yodl/) (there seems to be a revival at
 http://yodl.sourceforge.net/ though). For socat, the old version 1.31 is used;
 an rpm is still distributed with recent OpenSuSE versions (confirmed for
 OpenSuSE 10.1 in suse/i586/yodl-1.31.18-1142.i586.rpm). It appears to install
 smoothly also under RedHat Linux. After yodl 1.31 installation, the following
 correction must be performed in /usr/share/yodl/shared.yo in two places:
 < whenhtml(htmlcommand(<!)ARG1+htmlcommand(>)))
 > whenhtml(htmlcommand(<!--)ARG1+htmlcommand(-->)))


 license
 -------

 socat is distributed under the terms of the GNU GPLv2;
 except for install-sh, which is copyright MIT, with its own license;

 In addition, as a special exception, the copyright holder
 gives permission to link the code of this program with
 any version of the OpenSSL library which is distributed
 under a license identical to that listed in the included
 COPYING.OpenSSL file, and distribute linked combinations
 including the two. You must obey the GNU General Public
 License in all respects for all of the code used other
 than OpenSSL. If you modify this file, you may extend this
 exception to your version of the file, but you are not
 obligated to do so. If you do not wish to do so, delete
 this exception statement from your version.


     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation, version 2 of the License

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.


 contact
 -------

 For questions, bug reports, ideas, contributions etc. please contact
 socat@dest-unreach.org

 For socat source distribution, bug fixes, and latest news see
         http://www.dest-unreach.org/socat/

 www.socat.org is an alternate site providing the same contents.

 public git repository:
 	git://repo.or.cz/socat.git
 	http://repo.or.cz/socat.git

	about
	-----

	socat is a relay for bidirectional data transfer between two independent data
	channels. Each of these data channels may be a file, pipe, device (serial line
	etc. or a pseudo terminal), a socket (UNIX, IP4, IP6 - raw, UDP, TCP), an
	SSL socket, proxy CONNECT connection, a file descriptor (stdin etc.), the GNU
	line editor (readline), a program, or a combination of two of these.
	These modes include generation of "listening" sockets, named pipes, and pseudo
	terminals.

	socat can be used, e.g., as TCP port forwarder (one-shot or daemon), as an
	external socksifier, for attacking weak firewalls, as a shell interface to UNIX
	sockets, IP6 relay, for redirecting TCP oriented programs to a serial line, to
	logically connect serial lines on different computers, or to establish a
	relatively secure environment (su and chroot) for running client or server
	shell scripts with network connections.

	Many options are available to refine socats behaviour:
	terminal parameters, open() options, file permissions, file and process owners,
	basic socket options like bind address, advanced socket options like IP source
	routing, linger, TTL, TOS (type of service), or TCP performance tuning.

	More capabilities, like daemon mode with forking, client address check,
	"tail -f" mode, some stream data processing (line terminator conversion),
	choosing sockets, pipes, or ptys for interprocess communication, debug and
	trace options, logging to syslog, stderr or file, and last but not least
	precise error messages make it a versatile tool for many different purposes.

	In fact, many of these features already exist in specialized tools; but until
	now, there does not seem to exists another tool that provides such a generic,
	flexible, simple and almost comprehensive (UNIX) byte stream connector.


	packages
	--------

	before bothering with compilers, dependencies and include files, you might
	try to get a binary distribution that matches your platform. Have a look at
	the projects home page for actual information regarding socat binary
	distributions.


	platforms
	---------

	socat 1.7.0 was compiled and more or less successfully tested under the
	following operating systems:

	Debian lenny/sid on x86, kernel 2.6.24
	FreeBSD 6.1 on x86
	NetBSD 4.0 on x86
	OpenBSD 4.3 on x86
	OpenSolaris 10 on x86 with gcc
	Mac OS X 10.5.5 on iMac G5, with libreadline
	HP-UX 11.23
	AIX 5.3 on 64bit Power4 with gcc
	Cygwin 1.5.25 on i686

	tests on Tru64 can no longer be performed because HP testdrive has taken down
	these hosts.

	Some versions of socat have been reported to successfully compile under older
	Linux versions back to RedHat 2.1 (kernel 1.2.13, gcc 2.7.0), under AIX 4.1 and
	4.3, SunOS 5.7-5.8, FreeBSD 4.2 - 4.9, MacOS X 10.1, Cygwin, Solaris 8 on x86,
	OSR 5.0.6, NetBSD 1.6.1 and 2.0.2, OpenBSD 3.4 and 3.8, Tru64 5.1B, Mac OS X
	10.1-10.2, and HP-UX 11

	It might well compile and run under other UNIX like operating systems.


	install
	-------

	Get the tarball and extract it:
	tar xzf socat.tar.gz
	cd socat-1.7.4.5
	./configure
	make
	su
	make install # installs socat, filan, and procan in /usr/local/bin

	For compiling socat, gcc (or egc) is recommended.
	If gcc is not available, the configure script will fail to determine
	some features; then you'd better begin with one of the Makefiles and config.h's
	from the Config directory.

	If you have problems with the OpenSSL library, you can apply the option
	"--disable-openssl" to configure.

	If you have problems with the readline library or (n)curses, you can apply the
	option "--disable-readline" to configure.

	If you have problems with the tcp wrappers library, you can apply the option
	"--disable-libwrap" to configure.

	If you still get errors or a tremendous amount of warnings you can exclude
	the features for system call tracing and file descriptor analyzing by
	applying the options "--disable-sycls --disable-filan" to configure.

	You still need the functions vsnprintf and snprintf that are in the GNU libc,
	but might not be available with some proprietary libc's.

	The configure script looks for headers and libraries of openssl, readline, and
	tcp wrappers in the OS'es standard places and in the subdirectories include/
	and lib/ of the following places:
	/sw/
	/usr/local/
	/opt/freeware/
	/usr/sfw/
	and for openssl also in:
	/usr/local/ssl/
	In case of unexpected behaviour it is important to understand that configure
	first searches for the appropriate include file and then expects to find the
	library in the associated lib directory. That means, when e.g. a OpenSSL
	installation resides under /usr/local and there is a symbolic link from
	/usr/include/ssl/ssl.h to /usr/local/ssl/include/ssl/ssl.h, configure will find
	the /usr/include/... header and will therefore expect libssl in /usr/lib
	instead of /usr/local/...

	If configure does not find a header file or library but you know where it is,
	you can specify additional search locations, e.g.:
	export LIBS="-L$HOME/lib"
	export CPPFLAGS="-I$HOME/include"
	before running configure and make.

	For other operating systems, if socat does not compile without errors, refer to
	the file PORTING.


	platform specifics - Debian (Ubuntu, ...)
	-----------------------------------------

	libssl-dev


	platform specifics - redhat
	---------------------------

	Install the following packages before building socat:
	tcp_wrappers-devel
	readline-devel
	openssl-devel

	On RedHat Linux 9.0, including openssl/ssl.h might fail due to problems with
	the krb5-devel package. configure reacts with disabling openssl integration.
	To solve this issue, help cpp to find the krb5.h include file:
	CPPFLAGS="-I/usr/kerberos/include" ./configure


	platform specifics - aix
	------------------------

	The flock() prototype is not available but the function is. Thus, to enable the
	socat flock options, run configure and then change in config.h the line
	/* #undef HAVE_FLOCK */
	to
	#define HAVE_FLOCK 1
	and continue the build process.

	When using the OpenSSL rpm provided by IBM, configure might need the
	environment variable setting:
	LIBS="-L/opt/freeware/lib"

	When using the OpenSSL bundle provided by IBM, egd needs to be installed too
	to get enough entropy.

	socat compiles not only with gcc, but also with xlc. Just adapt the Makefile:
	replace gcc by /usr/vac/bin/xlc and remove gcc specific options
	"-Wall -Wno-parentheses".

	When linking with the OpenSSL library provided by IBM, errors may occur:
	ld: 0711-317 ERROR: Undefined symbol: .__umoddi3
	In this case, you need to link with libgcc or compile libcrypt yourself using
	xlc, or disable SSL (in config.h, undefine WITH_OPENSSL and recompile)

	The score of test.sh can be improved by uncommenting MISCDELAY=1 in this
	script.


	platform specifics - solaris
	----------------------------

	If libreadline or libssl are in a directory not searched by the loader per
	default, e.g. /opt/sfw/lib, you must add this directory to $LD_LIBRARY_PATH,
	for running both configure and the socat executables, e.g.:
	export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/sfw/lib

	For some shell scripts, it is preferable to have /usr/xpg4/bin at a prominent
	position in $PATH.

	With the default compiler define _GNU_SOURCE, the CMSG_* macros are not
	available, and therefore ancillary messages cannot be used. To enable these try
	the following:
	After running ./configure, edit Makefile and replace "-D_GNU_SOURCE" with
	"-D_XPG4_2 -D__EXTENSIONS__" and run make


	platform specifics - hp-ux
	--------------------------

	Ancillary messages cannot be compiled in with socat: both struct msghdr and
	struct cmsghdr are required. Compiling with -D_XOPEN_SOURCE_EXTENDED provides
	struct msghdr but disables struct cmsghdr while -D_OPEN_SOURCE disables struct
	msghdr but disables struct cmsghdr. Please contact socat development if you
	know a solution.

	Shutting down the write channel of a UNIX domain socket does not seem to
	trigger an EOF on the peer socket. This makes problems with the exec and
	system addresses.

	This OS provides the type "long long", but not the strtoll() function to read
	data into a long long variable.

	UNIX domain sockets are only supported with SOCK_STREAM, not with datagrams
	(see man 7 unix).

	With UDP sockets it seems to happen that the select() call reports available
	data (or EOF) but a subsequent read() call hangs.


	platform specifics - tru64
	--------------------------

	When the use of the readline address fails with an error like:
	socat: /sbin/loader: Fatal Error: Reference to unresolvable symbol "tgetent" in ".../libreadline.so.4"
	and you still want to use shared libraries, try the following workaround:
	$ make distclean; LIBS="-static" ./configure
	remove the "-static" occurrence in Makefile
	$ make


	documentation
	-------------

	These files reside in the doc subdirectory:

	socat.1 is the man page, socat.html is the HTML based man page. It is actual,
	but describes only the more useful options.

	doc/socat-openssltunnel.html is a simple tutorial for a private SSL connection.
	doc/socat-multicast.html is a short tutorial for multicast and broadcast
	communications.
	doc/socat-tun shows how to build a virtual network between two hosts.

	socat.1 and socat.html can be generated from socat.yo (which is released with
	socat 1.6.0.1 and later) using the yodl document language package. Maintenance
	of yodl had been discontinued by its author
	(http://www.xs4all.nl/~jantien/yodl/) (there seems to be a revival at
	http://yodl.sourceforge.net/ though). For socat, the old version 1.31 is used;
	an rpm is still distributed with recent OpenSuSE versions (confirmed for
	OpenSuSE 10.1 in suse/i586/yodl-1.31.18-1142.i586.rpm). It appears to install
	smoothly also under RedHat Linux. After yodl 1.31 installation, the following
	correction must be performed in /usr/share/yodl/shared.yo in two places:
	< whenhtml(htmlcommand(<!)ARG1+htmlcommand(>)))
	> whenhtml(htmlcommand(<!--)ARG1+htmlcommand(-->)))


	license
	-------

	socat is distributed under the terms of the GNU GPLv2;
	except for install-sh, which is copyright MIT, with its own license;

	In addition, as a special exception, the copyright holder
	gives permission to link the code of this program with
	any version of the OpenSSL library which is distributed
	under a license identical to that listed in the included
	COPYING.OpenSSL file, and distribute linked combinations
	including the two. You must obey the GNU General Public
	License in all respects for all of the code used other
	than OpenSSL. If you modify this file, you may extend this
	exception to your version of the file, but you are not
	obligated to do so. If you do not wish to do so, delete
	this exception statement from your version.


	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation, version 2 of the License

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.


	contact
	-------

	For questions, bug reports, ideas, contributions etc. please contact
	socat@dest-unreach.org

	For socat source distribution, bug fixes, and latest news see
	http://www.dest-unreach.org/socat/

	www.socat.org is an alternate site providing the same contents.

	public git repository:
	git://repo.or.cz/socat.git
	http://repo.or.cz/socat.git